As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_add_commented_lines() rather
than a single character.
All of the callers have to be adjusted; most can just pass
comment_line_str rather than comment_line_char.
And now our "cheat" in strbuf_commented_addf() can go away, as we can
take the full string from it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_commented_addf() rather than a
single character.
All of the callers have to be adjusted, but they can just pass
comment_line_str rather than comment_line_char.
Note that we rely on strbuf_add_commented_lines() under the hood, so
we'll cheat a bit to squeeze our string into a single character (for now
the two are equivalent, and we'll address this TODO in the next patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_stripspace(), rather than a
single character. We can continue to support its feature of ignoring
comments by accepting a NULL pointer (as opposed to the current behavior
of a NUL byte).
All of the callers have to be adjusted, but they can all just pass
comment_line_str (or NULL).
Inside the function we detect comments by comparing the first byte of a
line to the comment character. We'll adjust that to use starts_with(),
which will match multiple bytes (though for now, of course, we still
only allow a single byte, so it's academic).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
As a library that only interacts with other primitives, strbuf should
not utilize the comment_line_char global variable within its
functions. Therefore, add an additional parameter for functions that use
comment_line_char and refactor callers to pass it in instead.
strbuf_stripspace() removes the skip_comments boolean and checks if
comment_line_char is a non-NUL character to determine whether to skip
comments or not.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hash.h depends upon and includes repository.h, due to the definition and
use of the_hash_algo (defined as the_repository->hash_algo). However,
most headers trying to include hash.h are only interested in the layout
of the structs like object_id. Move the parts of hash.h that do not
depend upon repository.h into a new file hash-ll.h (the "low level"
parts of hash.h), and adjust other files to use this new header where
the convenience inline functions aren't needed.
This allows hash.h and object.h to be fairly small, minimal headers. It
also exposes a lot of hidden dependencies on both path.h (which was
brought in by repository.h) and repository.h (which was previously
implicitly brought in by object.h), so also adjust other files to be
more explicit about what they depend upon.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache.h and strbuf.[ch] had editor-related functions. Move these into
editor.[ch].
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An interactive rebase provides opportunities for the user to edit the
todo list. The --update-refs option initializes the list with some
'update-ref <ref>' steps, but the user could add these manually.
Further, the user could add or remove these steps during pauses in the
interactive rebase.
Add a new method, todo_list_filter_update_refs(), that scans a todo_list
and compares it to the stored update-refs file. There are two actions
that can happen at this point:
1. If a '<ref>/<before>/<after>' triple in the update-refs file does not
have a matching 'update-ref <ref>' command in the todo-list _and_ the
<after> value is the null OID, then remove that triple. Here, the
user removed the 'update-ref <ref>' command before it was executed,
since if it was executed then the <after> value would store the
commit at that position.
2. If a 'update-ref <ref>' command in the todo-list does not have a
matching '<ref>/<before>/<after>' triple in the update-refs file,
then insert a new one. Store the <before> value to be the current
OID pointed at by <ref>. This is handled inside of the
init_update_ref_record() helper method.
We can test that this works by rewriting the todo-list several times in
the course of a rebase. Check that each ref is locked or unlocked for
updates after each todo-list update. We can also verify that the ref
update fails if a concurrent process updates one of the refs after the
rebase process records the "locked" ref location.
To help these tests, add a new 'set_replace_editor' helper that will
replace the todo-list with an exact file.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the boilerplate for an "update-ref" command in the sequencer. This
connects to the current no-op do_update_ref() which will be filled in
after more connections are created.
The syntax in the todo list will be "update-ref <ref-name>" to signal
that we should store the current commit as the value for updating
<ref-name> at the end of the rebase.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'merge' command description for the todo list documentation in an
interactive rebase has multiple lines. The lines other than the first
one start with dots ('.') while the similar multi-line documentation for
'fixup' does not. This description only appears in the comment text of
the todo file during an interactive rebase.
The 'merge' command was documented when interactive rebase was first
ported to C in 145e05ac44 (rebase -i: rewrite append_todo_help() in C,
2018-08-10). These dots might have been carried over from the previous
shell implementation.
The 'fixup' command was documented more recently in 9e3cebd97c (rebase
-i: add fixup [-C | -c] command, 2021-01-29).
Looking at the output in an editor, my personal opinion is that the dots
are unnecessary and noisy. Remove them now before adding more commands
with multi-line documentation.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the `--preserve-merges` option going away, we no longer need this
function.
Helped-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `-c` says "edit the commit message" it's not clear what will be
edited. The original's commit message or the replacement's message or a
combination of the two. Word it such that it states more precisely what
exactly will be edited. While at it, also drop the jarring period and
capitalization, neither of which is otherwise present in the message.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add options to `fixup` command to fixup both the commit contents and
message. `fixup -C` command is used to replace the original commit
message and `fixup -c`, additionally allows to edit the commit message.
Original-patch-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently we inadvertently added a few instances of using 0-width
format string to functions that we mark as printf-like without any
developers noticing. The root cause was that the compiler warning
that is triggered by this is almost always useless and we disabled
the warning in our developer builds, but not for general public.
The new instances have been corrected, and the warning has been
resurrected in the developer builds.
* rt/format-zero-length-fix:
config.mak.dev: re-enable -Wformat-zero-length
rebase-interactive.c: silence format-zero-length warnings
"git rebase" has learned to use the merge backend (i.e. the
machinery that drives "rebase -i") by default, while allowing
"--apply" option to use the "apply" backend (e.g. the moral
equivalent of "format-patch piped to am"). The rebase.backend
configuration variable can be set to customize.
* en/rebase-backend:
rebase: rename the two primary rebase backends
rebase: change the default backend from "am" to "merge"
rebase: make the backend configurable via config setting
rebase tests: repeat some tests using the merge backend instead of am
rebase tests: mark tests specific to the am-backend with --am
rebase: drop '-i' from the reflog for interactive-based rebases
git-prompt: change the prompt for interactive-based rebases
rebase: add an --am option
rebase: move incompatibility checks between backend options a bit earlier
git-rebase.txt: add more details about behavioral differences of backends
rebase: allow more types of rebases to fast-forward
t3432: make these tests work with either am or merge backends
rebase: fix handling of restrict_revision
rebase: make sure to pass along the quiet flag to the sequencer
rebase, sequencer: remove the broken GIT_QUIET handling
t3406: simplify an already simple test
rebase (interactive-backend): fix handling of commits that become empty
rebase (interactive-backend): make --keep-empty the default
t3404: directly test the behavior of interest
git-rebase.txt: update description of --allow-empty-message
Fixes the following warnings:
rebase-interactive.c: In function ‘edit_todo_list’:
rebase-interactive.c:137:38: warning: zero-length gnu_printf format string [-Wformat-zero-length]
write_file(rebase_path_dropped(), "");
rebase-interactive.c:144:37: warning: zero-length gnu_printf format string [-Wformat-zero-length]
write_file(rebase_path_dropped(), "");
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Different rebase backends have different treatment for commits which
start empty (i.e. have no changes relative to their parent), and the
--keep-empty option was added at some point to allow adjusting behavior.
The handling of commits which start empty is actually quite similar to
commit b00bf1c9a8 (git-rebase: make --allow-empty-message the default,
2018-06-27), which pointed out that the behavior for various backends is
often more happenstance than design. The specific change made in that
commit is actually quite relevant as well and much of the logic there
directly applies here.
It makes a lot of sense in 'git commit' to error out on the creation of
empty commits, unless an override flag is provided. However, once
someone determines that there is a rare case that merits using the
manual override to create such a commit, it is somewhere between
annoying and harmful to have to take extra steps to keep such
intentional commits around. Granted, empty commits are quite rare,
which is why handling of them doesn't get considered much and folks tend
to defer to existing (accidental) behavior and assume there was a reason
for it, leading them to just add flags (--keep-empty in this case) that
allow them to override the bad defaults. Fix the interactive backend so
that --keep-empty is the default, much like we did with
--allow-empty-message. The am backend should also be fixed to have
--keep-empty semantics for commits that start empty, but that is not
included in this patch other than a testcase documenting the failure.
Note that there was one test in t3421 which appears to have been written
expecting --keep-empty to not be the default as correct behavior. This
test was introduced in commit 00b8be5a4d ("add tests for rebasing of
empty commits", 2013-06-06), which was part of a series focusing on
rebase topology and which had an interesting original cover letter at
https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/
which noted
Your input especially appreciated on whether you agree with the
intent of the test cases.
and then went into a long example about how one of the many tests added
had several questions about whether it was correct. As such, I believe
most the tests in that series were about testing rebase topology with as
many different flags as possible and were not trying to state in general
how those flags should behave otherwise.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When set to "warn" or "error", `rebase.missingCommitsCheck' would make
`rebase -i' warn if the user removed commits from the todo list to
prevent mistakes. Unfortunately, `rebase --edit-todo' and `rebase
--continue' don't take it into account.
This adds the ability for `rebase --edit-todo' and `rebase --continue'
to check if commits were dropped by the user. As both edit_todo_list()
and complete_action() parse the todo list and check for dropped commits,
the code doing so in the latter is removed to reduce duplication.
`edit_todo_list_advice' is removed from sequencer.c as it is no longer
used there.
This changes when a backup of the todo list is made. Until now, it was
saved only once, before the initial edit. Now, it is also made if the
original todo list has no errors or no dropped commits. Thus, the
backup should be error-free. Without this, sequencer_continue()
(`rebase --continue') could only compare the current todo list against
the original, unedited list. Before this change, this file was only
used by edit_todo_list() and `rebase -p' to create the backup before
the initial edit, and check_todo_list_from_file(), only used by
`rebase -p' to check for dropped commits after its own initial edit.
If the edited list has an error, a file, `dropped', is created to
report the issue. Otherwise, it is deleted. Usually, the edited list
is compared against the list before editing, but if this file exists,
it will be compared to the backup. Also, if the file exists,
sequencer_continue() checks the list for dropped commits. If the
check was performed every time, it would fail when resuming a rebase
after resolving a conflict, as the backup will contain commits that
were picked, but they will not be in the new list. It's safe to
ignore this check if `dropped' does not exist, because that means that
no errors were found at the last edition, so any missing commits here
have already been picked.
Five tests are added to t3404. The tests for
`rebase.missingCommitsCheck = warn' and `rebase.missingCommitsCheck =
error' have a similar structure. First, we start a rebase with an
incorrect command on the first line. Then, we edit the todo list,
removing the first and the last lines. This demonstrates that
`--edit-todo' notices dropped commits, but not when the command is
incorrect. Then, we restore the original todo list, and edit it to
remove the last line. This demonstrates that if we add a commit after
the initial edit, then remove it, `--edit-todo' will notice that it
has been dropped. Then, the actual rebase takes place. In the third
test, it is also checked that `--continue' will refuse to resume the
rebase if commits were dropped. The fourth test checks that no errors
are raised when resuming a rebase after resolving a conflict, the fifth
checks that no errors are raised when editing the todo list after
pausing the rebase.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message contained in `edit_todo_list_advice' (sequencer.c) is
printed after the initial edit of the todo list if it can't be parsed or
if commits were dropped. This is done either in complete_action() for
`rebase -i', or in check_todo_list_from_file() for `rebase -p'.
Since we want to add this check when editing the list, we also want to
use this message from edit_todo_list() (rebase-interactive.c). To this
end, check_todo_list_from_file() is moved to rebase-interactive.c, and
`edit_todo_list_advice' is copied there. In the next commit,
complete_action() will stop using it, and `edit_todo_list_advice' will
be removed from sequencer.c.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `rebase.missingCommitsCheck` is in effect, we use the backup of the
todo list that was copied just before the user was allowed to edit it.
That backup is, of course, just as susceptible to the hash collision as
the todo list itself: a reworded commit could make a previously
unambiguous short commit ID ambiguous all of a sudden.
So let's not just copy the todo list, but let's instead write out the
backup with expanded commit IDs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
edit_todo_list() is changed to work on a todo_list, and to handle the
initial edition of the todo list (ie. making a backup of the todo
list).
It does not check for dropped commits yet, as todo_list_check() does not
take the commits that have already been processed by the rebase (ie. the
todo list is edited in the middle of a rebase session).
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the writing of the comment "Rebase $shortrevisions onto
$shortonto ($command_count commands)" from todo_list_write_to_file() to
append_todo_help().
shortrevisions, shortonto, and command_count are passed as parameters to
append_todo_help().
During the initial edit of the todo list, shortrevisions and shortonto
are not NULL. Therefore, if shortrevisions or shortonto is NULL, then
edit_todo would be true, otherwise it would be false. Thus, edit_todo
is removed from the parameters of append_todo_help().
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like complete_action(), edit_todo_list() used a
function (transform_todo_file()) that read the todo list from the disk
and wrote it back, resulting in useless disk accesses.
This changes edit_todo_list() to call directly todo_list_write_to_file()
instead.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors check_todo_list() to work on a todo_list to avoid
redundant reads and writes to the disk. The function is renamed
todo_list_check(). The parsing of the two todo lists is left to the
caller.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, check_todo_list_from_file(). It reads the file
from the disk, parses it, pass the todo_list to todo_list_check(), and
writes it back to the disk.
As get_missing_commit_check_level() and the enum
missing_commit_check_level are no longer needed inside of sequencer.c,
they are moved to rebase-interactive.c, and made static again.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors transform_todos() to work on a todo_list. The function
is renamed todo_list_transform().
As rebase -p still need to check the todo list from the disk, a new
function is introduced, transform_todo_file(). It is still used by
complete_action() and edit_todo_list() for now, but they will be
replaced in a future commit.
todo_list_transform() is not a static function, because it will be used
by edit_todo_list() from rebase-interactive.c in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there add a forward declaration for struct strbuf.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that the_hash_algo stays, even if we can easily replace it with
repo->hash_algo. My reason is I still believe tying hash_algo to a
struct repository is a wrong move. But if I'm wrong, we can always go
for another round of conversion.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'edit' command can be used to cherry-pick a commit and then
immediately drop out of the interactive rebase, with exit code 0, to let
the user amend the commit, or test it, or look around.
Sometimes this functionality would come in handy *without*
cherry-picking a commit, e.g. to interrupt the interactive rebase even
before cherry-picking a commit, or immediately after an 'exec' or a
'merge'.
This commit introduces that functionality, as the spanking new 'break'
command.
Suggested-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the modes `--skip-unnecessary-picks`, `--append-todo-help`,
and `--checkout-onto` from rebase--helper.c, the functions of
git-rebase--interactive.sh that were rendered useless by the rewrite of
complete_action(), and append_todo_help_to_file() from
rebase-interactive.c.
skip_unnecessary_picks() and checkout_onto() becomes static, as they are
only used inside of the sequencer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors append_todo_help() to write its message to a buffer
instead of the todo-list. This is needed for the rewrite of
complete_action(), which will come after the next commit.
As rebase--helper still needs the file manipulation part of
append_todo_help(), it is extracted to a temporary function,
append_todo_help_to_file(). This function will go away after the
rewrite of complete_action().
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites the edit-todo functionality from shell to C.
To achieve that, a new command mode, `edit-todo`, is added, and the
`write-edit-todo` flag is removed, as the shell script does not need to
write the edit todo help message to the todo list anymore.
The shell version is then stripped in favour of a call to the helper.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites append_todo_help() from shell to C. It also incorporates
some parts of initiate_action() and complete_action() that also write
help texts to the todo file.
This also introduces the source file rebase-interactive.c. This file
will contain functions necessary for interactive rebase that are too
specific for the sequencer, and is part of libgit.a.
Two flags are added to rebase--helper.c: one to call
append_todo_help() (`--append-todo-help`), and another one to tell
append_todo_help() to write the help text suited for the edit-todo
mode (`--write-edit-todo`).
Finally, append_todo_help() is removed from git-rebase--interactive.sh
to use `rebase--helper --append-todo-help` instead.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
