The CURLOPT_FILE name is an alias for CURLOPT_WRITEDATA, the
CURLOPT_WRITEDATA name has been preferred since curl 7.9.7, released
in May 2002[1].
1. https://curl.se/libcurl/c/CURLOPT_WRITEDATA.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the conditional use of CURLAUTH_DIGEST_IE and
CURLOPT_USE_SSL. These two have been split from earlier simpler checks
against LIBCURL_VERSION_NUM for ease of review.
According to
https://github.com/curl/curl/blob/master/docs/libcurl/symbols-in-versions
the CURLAUTH_DIGEST_IE flag became available in 7.19.3, and
CURLOPT_USE_SSL in 7.17.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we dropped support for curl < 7.16.0, let's
continue that and drop support for versions older than 7.19.3. This
allows us to simplify the code by getting rid of some "#ifdef"'s.
Git was broken with vanilla curl < 7.19.4 from v2.12.0 until
v2.15.0. Compiling with it was broken by using CURLPROTO_* outside any
"#ifdef" in aeae4db174 (http: create function to get curl allowed
protocols, 2016-12-14), and fixed in v2.15.0 in f18777ba6e (http: fix
handling of missing CURLPROTO_*, 2017-08-11).
It's unclear how much anyone was impacted by that in practice, since
as noted in [1] RHEL versions using curl older than that still
compiled, because RedHat backported some features. Perhaps other
vendors did the same.
Still, it's one datapoint indicating that it wasn't in active use at
the time. That (the v2.12.0 release) was in Feb 24, 2017, with v2.15.0
on Oct 30, 2017, it's now mid-2021.
1. http://lore.kernel.org/git/c8a2716d-76ac-735c-57f9-175ca3acbcb0@jupiterrise.com;
followed-up by f18777ba6e (http: fix handling of missing CURLPROTO_*,
2017-08-11)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we dropped support for curl < 7.11.1, let's
continue that and drop support for versions older than 7.16.0. This
allows us to get rid of some now-obsolete #ifdefs.
Choosing 7.16.0 is a somewhat arbitrary cutoff:
1. It came out in October of 2006, almost 15 years ago.
Besides being a nice round number, around 10 years is
a common end-of-life support period, even for conservative
distributions.
2. That version introduced the curl_multi interface, which
gives us a lot of bang for the buck in removing #ifdefs
RHEL 5 came with curl 7.15.5[1] (released in August 2006). RHEL 5's
extended life cycle program ended on 2020-11-30[1]. RHEL 6 comes with
curl 7.19.7 (released in November 2009), and RHEL 7 comes with
7.29.0 (released in February 2013).
1. http://lore.kernel.org/git/873e1f31-2a96-5b72-2f20-a5816cad1b51@jupiterrise.com
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop support for this ancient version of curl and simplify the code by
allowing us get rid of some "#ifdef"'s.
Git will not build with vanilla curl older than 7.11.1 due our use of
CURLOPT_POSTFIELDSIZE in 37ee680d9b
(http.postbuffer: allow full range of ssize_t values,
2017-04-11). This field was introduced in curl 7.11.1.
We could solve these compilation problems with more #ifdefs,
but it's not worth the trouble. Version 7.11.1 came out in
March of 2004, over 17 years ago. Let's declare that too old
and drop any existing ifdefs that go further back. One
obvious benefit is that we'll have fewer conditional bits
cluttering the code.
This patch drops all #ifdefs that reference older versions
(note that curl's preprocessor macros are in hex, so we're
looking for 070b01, not 071101).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regression fix for a change made during this cycle.
* cs/http-use-basic-after-failed-negotiate:
Revert "remote-curl: fall back to basic auth if Negotiate fails"
t5551: test http interaction with credential helpers
This reverts commit 1b0d9545bb.
That commit does fix the situation it intended to (avoiding Negotiate
even when the credentials were provided in the URL), but it creates a
more serious regression: we now never hit the conditional for "we had a
username and password, tried them, but the server still gave us a 401".
That has two bad effects:
1. we never call credential_reject(), and thus a bogus credential
stored by a helper will live on forever
2. we never return HTTP_NOAUTH, so the error message the user gets is
"The requested URL returned error: 401", instead of "Authentication
failed".
Doing this correctly seems non-trivial, as we don't know whether the
Negotiate auth was a problem. Since this is a regression in the upcoming
v2.23.0 release (for which we're in -rc0), let's revert for now and work
on a fix separately.
(Note that this isn't a pure revert; the previous commit added a test
showing the regression, so we can now flip it to expect_success).
Reported-by: Ben Humphreys <behumphreys@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're hashing a value which is going to be an object ID, we want to
zero-pad that value if necessary. To do so, use the final_oid_fn
instead of the final_fn anytime we're going to create an object ID to
ensure we perform this operation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When accessing a server with a URL like https://user:pass@site/, we
did not to fall back to the basic authentication with the
credential material embedded in the URL after the "Negotiate"
authentication failed. Now we do.
* cs/http-use-basic-after-failed-negotiate:
remote-curl: fall back to basic auth if Negotiate fails
The http codepath learned to let the credential layer to cache the
password used to unlock a certificate that has successfully been
used.
* js/http-pki-credential-store:
http: drop the check for an empty proxy password before approving
http: store credential when PKI auth is used
When the username and password are supplied in a url like this
https://myuser:secret@git.exampe/myrepo.git and the server supports the
negotiate authenticaten method, git does not fall back to basic auth and
libcurl hardly tries to authenticate with the negotiate method.
Stop using the Negotiate authentication method after the first failure
because if it fails on the first try it will never succeed.
Signed-off-by: Christopher Schenk <christopher@cschenk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
credential_approve() already checks for a non-empty password before
saving, so there's no need to do the extra check here.
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already looked for the PKI credentials in the credential store, but
failed to approve it on success. Meaning, the PKI certificate password
was never stored and git would request it on every connection to the
remote. Let's complete the chain by storing the certificate password on
success.
Likewise, we also need to reject the credential when there is a failure.
Curl appears to report client-related certificate issues are reported
with the CURLE_SSL_CERTPROBLEM error. This includes not only a bad
password, but potentially other client certificate related problems.
Since we cannot get more information from curl, we'll go ahead and
reject the credential upon receiving that error, just to be safe and
avoid caching or saving a bad password.
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when fetching, packfiles referenced by URIs are run through
index-pack without any arguments other than --stdin and --keep, no
matter what arguments are used for the packfile that is inline in the
fetch response. As a preparation for ensuring that all packs (whether
inline or not) use the same index-pack arguments, teach the http
subsystem to allow custom index-pack arguments.
http-fetch has been updated to use the new API. For now, it passes
--keep alone instead of --keep with a process ID, but this is only
temporary because http-fetch itself will be taught to accept index-pack
parameters (instead of using a hardcoded constant) in a subsequent
commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts remaining files from the first half of the alphabet,
to keep the diff to a manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add '[abcdefghjkl]*'".
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "fetch/clone" protocol has been updated to allow the server to
instruct the clients to grab pre-packaged packfile(s) in addition
to the packed object data coming over the wire.
* jt/cdn-offload:
upload-pack: fix a sparse '0 as NULL pointer' warning
upload-pack: send part of packfile response as uri
fetch-pack: support more than one pack lockfile
upload-pack: refactor reading of pack-objects out
Documentation: add Packfile URIs design doc
Documentation: order protocol v2 sections
http-fetch: support fetching packfiles by URL
http-fetch: refactor into function
http: refactor finish_http_pack_request()
http: use --stdin when indexing dumb HTTP pack
Teach http-fetch the ability to download packfiles directly, given a
URL, and to verify them.
The http_pack_request suite has been augmented with a function that
takes a URL directly. With this function, the hash is only used to
determine the name of the temporary file.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
finish_http_pack_request() does multiple tasks, including some
housekeeping on a struct packed_git - (1) closing its index, (2)
removing it from a list, and (3) installing it. These concerns are
independent of fetching a pack through HTTP: they are there only because
(1) the calling code opens the pack's index before deciding to fetch it,
(2) the calling code maintains a list of packfiles that can be fetched,
and (3) the calling code fetches it in order to make use of its objects
in the same process.
In preparation for a subsequent commit, which adds a feature that does
not need any of this housekeeping, remove (1), (2), and (3) from
finish_http_pack_request(). (2) and (3) are now done by a helper
function, and (1) is the responsibility of the caller (in this patch,
done closer to the point where the pack index is opened).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git fetches a pack using dumb HTTP, (among other things) it invokes
index-pack on a ".pack.temp" packfile, specifying the filename as an
argument.
A future commit will require the aforementioned invocation of index-pack
to also generate a "keep" file. To use this, we either have to use
index-pack's naming convention (because --keep requires the pack's
filename to end with ".pack") or to pass the pack through stdin. Of the
two, it is simpler to pass the pack through stdin.
Thus, teach http to pass --stdin to index-pack. As a bonus, the code is
now simpler.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In trace output (when GIT_TRACE_CURL is true), redact the values of all
HTTP cookies by default. Now that auth headers (since the implementation
of GIT_TRACE_CURL in 74c682d3c6 ("http.c: implement the GIT_TRACE_CURL
environment variable", 2016-05-24)) and cookie values (since this
commit) are redacted by default in these traces, also allow the user to
inhibit these redactions through an environment variable.
Since values of all cookies are now redacted by default,
GIT_REDACT_COOKIES (which previously allowed users to select individual
cookies to redact) now has no effect.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever GIT_CURL_VERBOSE is set, teach Git to behave as if
GIT_TRACE_CURL=1 and GIT_TRACE_CURL_NO_DATA=1 is set, instead of setting
CURLOPT_VERBOSE.
This is to prevent inadvertent revelation of sensitive data. In
particular, GIT_CURL_VERBOSE redacts neither the "Authorization" header
nor any cookies specified by GIT_REDACT_COOKIES.
Unifying the tracing mechanism also has the future benefit that any
improvements to the tracing mechanism will benefit both users of
GIT_CURL_VERBOSE and GIT_TRACE_CURL, and we do not need to remember to
implement any improvement twice.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may feed a URL like "cert:///path/to/cert.pem" into the credential
machinery to get the key for a client-side certificate. That
credential has no hostname field, which is about to be disallowed (to
avoid confusion with protocols where a helper _would_ expect a
hostname).
This means as of the next patch, credential helpers won't work for
unlocking certs. Let's fix that by doing two things:
- when we parse a url with an empty host, set the host field to the
empty string (asking only to match stored entries with an empty
host) rather than NULL (asking to match _any_ host).
- when we build a cert:// credential by hand, similarly assign an
empty string
It's the latter that is more likely to impact real users in practice,
since it's what's used for http connections. But we don't have good
infrastructure to test it.
The url-parsing version will help anybody using git-credential in a
script, and is easy to test.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
A handful of options to configure SSL when talking to proxies have
been added.
* js/https-proxy-config:
http: add environment variable support for HTTPS proxies
http: add client cert support for HTTPS proxies
Add 4 environment variables that can be used to configure the proxy
cert, proxy ssl key, the proxy cert password protected flag, and the
CA info for the proxy.
Documentation for the options was also updated.
Signed-off-by: Jorge Lopez Silva <jalopezsilva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git supports performing connections to HTTPS proxies, but we don't
support doing mutual authentication with them (through TLS).
Add the necessary options to be able to send a client certificate to
the HTTPS proxy.
A client certificate can provide an alternative way of authentication
instead of using 'ProxyAuthorization' or other more common methods of
authentication. Libcurl supports this functionality already, so changes
are somewhat minimal. The feature is guarded by the first available
libcurl version that supports these options.
4 configuration options are added and documented, cert, key, cert
password protected and CA info. The CA info should be used to specify a
different CA path to validate the HTTPS proxy cert.
Signed-off-by: Jorge Lopez Silva <jalopezsilva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for inserting a C string into a strbuf. Use it
throughout the source to get rid of magic string length constants and
explicit strlen() calls.
Like strbuf_addstr(), implement it as an inline function to avoid the
implicit strlen() calls to cause runtime overhead.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP transport had possible allocator/deallocator mismatch, which
has been corrected.
* cb/curl-use-xmalloc:
remote-curl: unbreak http.extraHeader with custom allocators
In 93b980e58f (http: use xmalloc with cURL, 2019-08-15), we started to
ask cURL to use `xmalloc()`, and if compiled with nedmalloc, that means
implicitly a different allocator than the system one.
Which means that all of cURL's allocations and releases now _need_ to
use that allocator.
However, the `http_options()` function used `slist_append()` to add any
configured extra HTTP header(s) _before_ asking cURL to use `xmalloc()`,
and `http_cleanup()` would release them _afterwards_, i.e. in the
presence of custom allocators, cURL would attempt to use the wrong
allocator to release the memory.
A naïve attempt at fixing this would move the call to
`curl_global_init()` _before_ the config is parsed (i.e. before that
call to `slist_append()`).
However, that does not work, as we _also_ parse the config setting
`http.sslbackend` and if found, call `curl_global_sslset()` which *must*
be called before `curl_global_init()`, for details see:
https://curl.haxx.se/libcurl/c/curl_global_sslset.html
So let's instead make the config parsing entirely independent from
cURL's data structures. Incidentally, this deletes two more lines than
it introduces, which is nice.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow callers to specify exactly what characters need to be URL-encoded
and which do not. This new API will be taken advantage of in a patch
later in this set.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fread/fwrite-like functions in http.c, namely fread_buffer,
fwrite_buffer, fwrite_null, fwrite_sha1_file all return the
multiplication of the size and number of items they are being given.
Practically speaking, it doesn't matter, because in all contexts where
those functions are used, size is 1.
But those functions being similar to fread and fwrite (the curl API is
designed around being able to use fread and fwrite directly), it might
be preferable to make them behave like fread and fwrite, which, from
the fread/fwrite manual page, is:
On success, fread() and fwrite() return the number of items read
or written. This number equals the number of bytes transferred
only when size is 1. If an error occurs, or the end of the file
is reached, the return value is a short item count (or zero).
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from unsigned char[20] to struct object_id continues.
* bc/hash-transition-16: (35 commits)
gitweb: make hash size independent
Git.pm: make hash size independent
read-cache: read data in a hash-independent way
dir: make untracked cache extension hash size independent
builtin/difftool: use parse_oid_hex
refspec: make hash size independent
archive: convert struct archiver_args to object_id
builtin/get-tar-commit-id: make hash size independent
get-tar-commit-id: parse comment record
hash: add a function to lookup hash algorithm by length
remote-curl: make hash size independent
http: replace sha1_to_hex
http: compute hash of downloaded objects using the_hash_algo
http: replace hard-coded constant with the_hash_algo
http-walker: replace sha1_to_hex
http-push: remove remaining uses of sha1_to_hex
http-backend: allow 64-character hex names
http-push: convert to use the_hash_algo
builtin/pull: make hash-size independent
builtin/am: make hash size independent
...
Code clean-up around a much-less-important-than-it-used-to-be
update_server_info() funtion.
* jk/server-info-rabbit-hole:
update_info_refs(): drop unused force parameter
server-info: drop objdirlen pointer arithmetic
server-info: drop nr_alloc struct member
server-info: use strbuf to read old info/packs file
server-info: simplify cleanup in parse_pack_def()
server-info: fix blind pointer arithmetic
http: simplify parsing of remote objects/info/packs
packfile: fix pack basename computation
midx: check both pack and index names for containment
t5319: drop useless --buffer from cat-file
t5319: fix bogus cat-file argument
pack-revindex: open index if necessary
packfile.h: drop extern from function declarations
We can use skip_prefix() and parse_oid_hex() to continuously increment
our pointer, rather than dealing with magic numbers. This also fixes a
few small shortcomings:
- if we see a line with the right prefix, suffix, and length, i.e.
matching /P pack-.{40}.pack\n/, we'll interpret the middle part as
hex without checking if it could be parsed. This could lead to us
looking at uninitialized garbage in the hash array. In practice this
means we'll just make a garbage request to the server which will
fail, though it's interesting that a malicious server could convince
us to leak 40 bytes of uninitialized stack to them.
- the current code is picky about seeing a newline at the end of file,
but we can easily be more liberal
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since sha1_to_hex is limited to SHA-1, replace it with hash_to_hex.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a hard-coded 40 with a reference to the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This member is used to represent the pack checksum of the pack in
question. Expand this member to be GIT_MAX_RAWSZ bytes in length so it
works with longer hashes and rename it to be "hash" instead of "sha1".
This transformation was made with a change to the definition and the
following semantic patch:
@@
struct packed_git *E1;
@@
- E1->sha1
+ E1->hash
@@
struct packed_git E1;
@@
- E1.sha1
+ E1.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We make some requests with CURLOPT_FAILONERROR and some without, and
then handle_curl_result() normalizes any failures to a uniform CURLcode.
There are some other code paths in the dumb-http walker which don't use
handle_curl_result(); let's pull the normalization into its own function
so it can be reused.
Arguably those code paths would benefit from the rest of
handle_curl_result(), notably the auth handling. But retro-fitting it
now would be a lot of work, and in practice it doesn't matter too much
(whatever authentication we needed to make the initial contact with the
server is generally sufficient for the rest of the dumb-http requests).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Debugging help for http transport.
* ms/http-no-more-failonerror:
test: test GIT_CURL_VERBOSE=1 shows an error
remote-curl: unset CURLOPT_FAILONERROR
remote-curl: define struct for CURLOPT_WRITEFUNCTION
http: enable keep_error for HTTP requests
http: support file handles for HTTP_KEEP_ERROR
curl stops parsing a response when it sees a bad HTTP status code and it
has CURLOPT_FAILONERROR set. This prevents GIT_CURL_VERBOSE to show HTTP
headers on error.
keep_error is an option to receive the HTTP response body for those
error responses. By enabling this option, curl will process the HTTP
response headers, and they're shown if GIT_CURL_VERBOSE is set.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP_KEEP_ERROR makes it easy to debug HTTP transport errors. In order
to make HTTP_KEEP_ERROR enabled for all requests, file handles need to
be supported.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loose object access code in sha1-file.c is some of the oldest in
Git, and could use some modernizing. It mostly uses "unsigned char *"
for object ids, which these days should be "struct object_id".
It also uses the term "sha1_file" in many functions, which is confusing.
The term "loose_objects" is much better. It clearly distinguishes
them from packed objects (which didn't even exist back when the name
"sha1_file" came into being). And it also distinguishes it from the
checksummed-file concept in csum-file.c (which until recently was
actually called "struct sha1file"!).
This patch converts the functions {open,close,map,stat}_sha1_file() into
open_loose_object(), etc, and switches their sha1 arguments for
object_id structs. Similarly, path functions like fill_sha1_path()
become fill_loose_path() and use object_ids.
The function sha1_loose_object_info() already says "loose", so we can
just drop the "sha1" (and teach it to use object_id).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dumb-http walker code still passes around and stores object ids as
"unsigned char *sha1". Let's modernize it.
There's probably still more work to be done to handle dumb-http fetches
with a new, larger hash. But that can wait; this is enough that we can
now convert some of the low-level object routines that we call into from
here (and in fact, some of the "oid.hash" references added here will be
further improved in the next patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.
* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs
The "http.version" configuration variable can be used with recent
enough cURL library to force the version of HTTP used to talk when
fetching and pushing.
* fc/http-version:
http: add support selecting http version
Translating the new strings introduced for v2.20 showed some typos.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sha1_file_name() function is used to generate the path to a loose
object in the object directory. It doesn't make much sense for it to
append, since the the path we write may be absolute (i.e., you cannot
reliably build up a path with it). Because many callers use it with a
static buffer, they have to strbuf_reset() manually before each call
(and the other callers always use an empty buffer, so they don't care
either way). Let's handle this automatically.
Since we're changing the semantics, let's take the opportunity to give
it a more hash-neutral name (which will also catch any callers from
topics in flight).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually we don't need to set libcurl to choose which version of the
HTTP protocol to use to communicate with a server.
But different versions of libcurl, the default value is not the same.
CURL >= 7.62.0: CURL_HTTP_VERSION_2TLS
CURL < 7.62: CURL_HTTP_VERSION_1_1
In order to give users the freedom to control the HTTP version,
we need to add a setting to choose which HTTP version to use.
Signed-off-by: Force Charlie <charlieio@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On platforms with recent cURL library, http.sslBackend configuration
variable can be used to choose a different SSL backend at runtime.
The Windows port uses this mechanism to switch between OpenSSL and
Secure Channel while talking over the HTTPS protocol.
* js/mingw-http-ssl:
http: when using Secure Channel, ignore sslCAInfo by default
http: add support for disabling SSL revocation checks in cURL
http: add support for selecting SSL backends at runtime
When a requested feature cannot be activated because the version of
cURL library used to build Git with is too old, most of the codepaths
give a warning like "$Feature is not supported with cURL < $Version",
marked for l10n. A few of them, however, did not follow that pattern
and said things like "$Feature is not activated, your curl version is
too old (>= $Version)", and without marking them for l10n.
Update these to match the style of the majority of warnings and mark
them for l10n.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of cURL v7.60.0, the Secure Channel backend can use the certificate
bundle provided via `http.sslCAInfo`, but that would override the
Windows Certificate Store. Since this is not desirable by default, let's
tell Git to not ask cURL to use that bundle by default when the `schannel`
backend was configured via `http.sslBackend`, unless
`http.schannelUseSSLCAInfo` overrides this behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds support for a new http.schannelCheckRevoke config value.
This config value is only used if http.sslBackend is set to "schannel",
which forces cURL to use the Windows Certificate Store when validating
server certificates associated with a remote server.
This config value should only be set to "false" if you are in an
environment where revocation checks are blocked by the network, with
no alternative options.
This is only supported in cURL 7.44 or later.
Note: originally, we wanted to call the config setting
`http.schannel.checkRevoke`. This, however, does not work: the `http.*`
config settings can be limited to specific URLs via `http.<url>.*`
(and this feature would mistake `schannel` for a URL).
Helped by Agustín Martín Barbero.
Signed-off-by: Brendan Forster <github@brendanforster.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of version 7.56.0, curl supports being compiled with multiple SSL
backends.
This patch adds the Git side of that feature: by setting http.sslBackend
to "openssl" or "schannel", Git for Windows can now choose the SSL
backend at runtime.
This comes in handy on Windows because Secure Channel ("schannel") is
the native solution, accessing the Windows Credential Store, thereby
allowing for enterprise-wide management of certificates. For historical
reasons, Git for Windows needs to support OpenSSL still, as it has
previously been the only supported SSL backend in Git for Windows for
almost a decade.
The patch has been carried in Git for Windows for over a year, and is
considered mature.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rounds out the previous three patches, covering the
inequality logic for the "hash" variant of the functions.
As with the previous three, the accompanying code changes
are the mechanical result of applying the coccinelle patch;
see those patches for more discussion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the few conditional uses of FREE_AND_NULL(x) to be
unconditional. As noted in the standard[1] free(NULL) is perfectly
valid, so we might as well leave this check up to the C library.
1. http://pubs.opengroup.org/onlinepubs/9699919799/functions/free.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our HTTP client code used to advertise that we accept gzip encoding
from the other side; instead, just let cURL library to advertise
and negotiate the best one.
* bw/remote-curl-compressed-responses:
remote-curl: accept compressed responses with protocol v2
remote-curl: accept all encodings supported by curl
Avoid unchecked snprintf() to make future code auditing easier.
* jk/snprintf-truncation:
fmt_with_err: add a comment that truncation is OK
shorten_unambiguous_ref: use xsnprintf
fsmonitor: use internal argv_array of struct child_process
log_write_email_headers: use strbufs
http: use strbufs instead of fixed buffers
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
Configure curl to accept all encodings which curl supports instead of
only accepting gzip responses.
This fixes an issue when using an installation of curl which is built
without the "zlib" feature. Since aa90b9697 (Enable info/refs gzip
decompression in HTTP client, 2012-09-19) we end up requesting "gzip"
encoding anyway despite libcurl not being able to decode it. Worse,
instead of getting a clear error message indicating so, we end up
falling back to "dumb" http, producing a confusing and difficult to
debug result.
Since curl doesn't do any checking to verify that it supports the a
requested encoding, instead set the curl option `CURLOPT_ENCODING` with
an empty string indicating that curl should send an "Accept-Encoding"
header containing only the encodings supported by curl.
Reported-by: Anton Golubev <anton.golubev@gmail.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We keep the names of incoming packs and objects in fixed
PATH_MAX-size buffers, and snprintf() into them. This is
unlikely to end up with truncated filenames, but it is
possible (especially on systems where PATH_MAX is shorter
than actual paths can be). Let's switch to using strbufs,
which makes the question go away entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the_hash_algo to find the right size for parsing pack names.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactoring the internal global data structure to make it possible
to open multiple repositories, work with and then close them.
Rerolled by Duy on top of a separate preliminary clean-up topic.
The resulting structure of the topics looked very sensible.
* sb/object-store: (27 commits)
sha1_file: allow sha1_loose_object_info to handle arbitrary repositories
sha1_file: allow map_sha1_file to handle arbitrary repositories
sha1_file: allow map_sha1_file_1 to handle arbitrary repositories
sha1_file: allow open_sha1_file to handle arbitrary repositories
sha1_file: allow stat_sha1_file to handle arbitrary repositories
sha1_file: allow sha1_file_name to handle arbitrary repositories
sha1_file: add repository argument to sha1_loose_object_info
sha1_file: add repository argument to map_sha1_file
sha1_file: add repository argument to map_sha1_file_1
sha1_file: add repository argument to open_sha1_file
sha1_file: add repository argument to stat_sha1_file
sha1_file: add repository argument to sha1_file_name
sha1_file: allow prepare_alt_odb to handle arbitrary repositories
sha1_file: allow link_alt_odb_entries to handle arbitrary repositories
sha1_file: add repository argument to prepare_alt_odb
sha1_file: add repository argument to link_alt_odb_entries
sha1_file: add repository argument to read_info_alternates
sha1_file: add repository argument to link_alt_odb_entry
sha1_file: add raw_object_store argument to alt_odb_usable
pack: move approximate object count to object store
...
Add a tlsv1.3 option to http.sslVersion in addition to the existing
tlsv1.[012] options. libcurl has supported this since 7.52.0.
This requires OpenSSL 1.1.1 with TLS 1.3 enabled or curl built with
recent versions of NSS or BoringSSL as the TLS backend.
Signed-off-by: Loganaden Velvindron <logan@hackers.mu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This conversion was done without the #define trick used in the earlier
series refactoring to have better repository access, because this function
is easy to review, as it only has one caller and all lines but the first
two are converted.
We must not convert 'pack_open_fds' to be a repository specific variable,
as it is used to monitor resource usage of the machine that Git executes
on.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow sha1_file_name callers to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
While at it, move the declaration to object-store.h, where it should
be easier to find.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a process with multiple repositories open, packfile accessors
should be associated to a single repository and not shared globally.
Move packed_git and packed_git_mru into the_repository and adjust
callers to reflect this.
[nd: while at there, wrap access to these two fields in get_packed_git()
and get_packed_git_mru(). This allows us to lazily initialize these
fields without caller doing that explicitly]
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was an unused file-scope static variable left in http.c when
building for versions of libCURL that is older than 7.19.4, which
has been fixed.
* rj/http-code-cleanup:
http: fix an unused variable warning for 'curl_no_proxy'
Instead of always sending the Git-Protocol header with the configured
version with every http request, explicitly send it when discovering
refs and then only send it on subsequent http requests if the server
understood the version requested.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a way for callers to request that extra headers be included when
making http requests.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http tracing code, often used to debug connection issues,
learned to redact potentially sensitive information from its output
so that it can be more safely sharable.
* jt/http-redact-cookies:
http: support omitting data from traces
http: support cookie redaction when tracing
GIT_TRACE_CURL provides a way to debug what is being sent and received
over HTTP, with automatic redaction of sensitive information. But it
also logs data transmissions, which significantly increases the log file
size, sometimes unnecessarily. Add an option "GIT_TRACE_CURL_NO_DATA" to
allow the user to omit such data transmissions.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using GIT_TRACE_CURL, Git already redacts the "Authorization:" and
"Proxy-Authorization:" HTTP headers. Extend this redaction to a
user-specified list of cookies, specified through the
"GIT_REDACT_COOKIES" environment variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a static buffer in sha1_file_name() is error prone
and the performance improvements it gives are not needed
in many of the callers.
So let's get rid of this static buffer and, if necessary
or helpful, let's use one in the caller.
Suggested-by: Jeff Hostetler <git@jeffhostetler.com>
Helped-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* rs/use-argv-array-in-child-process:
send-pack: use internal argv_array of struct child_process
http: use internal argv_array of struct child_process
Git has been taught to support an https:// URL used for http.proxy
when using recent versions of libcurl.
* ws/curl-http-proxy-over-https:
http: support CURLPROXY_HTTPS
Avoid a strangely magic array size (it's slightly too big) and explicit
index numbers by building the command line for index-pack using the
embedded argv_array of the child_process. Add the flag -o and its
argument with argv_array_pushl() to make it obvious that they belong
together. The resulting code is shorter and easier to extend.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
