Extend DWIM to try to infer `--orphan` when in an empty repository. i.e.
a repository with an invalid/unborn HEAD, no local branches, and if
`--guess-remote` is used then no remote branches.
This behavior is equivalent to `git switch -c` or `git checkout -b` in
an empty repository.
Also warn the user (overriden with `-f`/`--force`) when they likely
intend to checkout a remote branch to the worktree but have not yet
fetched from the remote. i.e. when using `--guess-remote` and there is a
remote but no local or remote refs.
Current Behavior:
% git --no-pager branch --list --remotes
% git remote
origin
% git workree add ../main
hint: If you meant to create a worktree containing a new orphan branch
[...]
hint: Disable this message with "git config advice.worktreeAddOrphan false"
fatal: invalid reference: HEAD
% git workree add --guess-remote ../main
hint: If you meant to create a worktree containing a new orphan branch
[...]
hint: Disable this message with "git config advice.worktreeAddOrphan false"
fatal: invalid reference: HEAD
% git fetch --quiet
% git --no-pager branch --list --remotes
origin/HEAD -> origin/main
origin/main
% git workree add --guess-remote ../main
Preparing worktree (new branch 'main')
branch 'main' set up to track 'origin/main'.
HEAD is now at dadc8e6dac commit message
%
New Behavior:
% git --no-pager branch --list --remotes
% git remote
origin
% git workree add ../main
No possible source branch, inferring '--orphan'
Preparing worktree (new branch 'main')
% git worktree remove ../main
% git workree add --guess-remote ../main
fatal: No local or remote refs exist despite at least one remote
present, stopping; use 'add -f' to overide or fetch a remote first
% git workree add --guess-remote -f ../main
No possible source branch, inferring '--orphan'
Preparing worktree (new branch 'main')
% git worktree remove ../main
% git fetch --quiet
% git --no-pager branch --list --remotes
origin/HEAD -> origin/main
origin/main
% git workree add --guess-remote ../main
Preparing worktree (new branch 'main')
branch 'main' set up to track 'origin/main'.
HEAD is now at dadc8e6dac commit message
%
Signed-off-by: Jacob Abel <jacobabel@nullpo.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for creating an orphan branch when adding a new worktree.
The functionality of this flag is equivalent to git switch's --orphan
option.
Current Behavior:
% git -C foo.git --no-pager branch -l
+ main
% git -C foo.git worktree add main/
Preparing worktree (new branch 'main')
HEAD is now at 6c93a75 a commit
%
% git init bar.git
Initialized empty Git repository in /path/to/bar.git/
% git -C bar.git --no-pager branch -l
% git -C bar.git worktree add main/
Preparing worktree (new branch 'main')
fatal: not a valid object name: 'HEAD'
%
New Behavior:
% git -C foo.git --no-pager branch -l
+ main
% git -C foo.git worktree add main/
Preparing worktree (new branch 'main')
HEAD is now at 6c93a75 a commit
%
% git init --bare bar.git
Initialized empty Git repository in /path/to/bar.git/
% git -C bar.git --no-pager branch -l
% git -C bar.git worktree add main/
Preparing worktree (new branch 'main')
fatal: invalid reference: HEAD
% git -C bar.git worktree add --orphan -b main/
Preparing worktree (new branch 'main')
% git -C bar.git worktree add --orphan -b newbranch worktreedir/
Preparing worktree (new branch 'newbranch')
%
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jacob Abel <jacobabel@nullpo.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document `-B` next to where `-b` is already documented to bring the
usage docs in line with other commands such as git checkout.
Signed-off-by: Jacob Abel <jacobabel@nullpo.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation and -h output for those built-in commands
where both the -h output and *.txt were lacking in word-wrapping.
There are many more built-ins that could use this treatment, this
change is narrowed to those where this whitespace change is needed to
make the -h and *.txt consistent in the end.
In the case of "Documentation/git-hash-object.txt" and
"builtin/hash-object.c" this is not a "doc txt & -h consistency"
change, as we're changing both versions, doing so here makes a
subsequent change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree list --porcelain" did not c-quote pathnames and lock
reasons with unsafe bytes correctly, which is worked around by
introducing NUL terminated output format with "-z".
* pw/worktree-list-with-z:
worktree: add -z option for list subcommand
Add a -z option to be used in conjunction with --porcelain that gives
NUL-terminated output. As 'worktree list --porcelain' does not quote
worktree paths this enables it to handle worktree paths that contain
newlines.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the last of multiple changes to git-worktree.txt, starting at
the LIST OUTPUT FORMAT section.
The EXAMPLES section has an instance of "working tree" that must stay as
it is, because it is not talking about a worktree, but an example of why
a user might want to create a worktree.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the sixth of multiple changes to git-worktree.txt, restricted to
the DETAILS section.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the fifth of multiple changes to git-worktree.txt, restricted to
the CONFIGURATION FILE section.
While here, clear up some language to improve readability.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the fourth of multiple changes to git-worktree.txt, restricted
to the REFS section.
This section previously described "per working tree" refs but they are
now replaced with "per-worktree" refs, which matches the definition in
glossary-content.txt.
The first paragraph of this section was also a bit confusing, so it is
cleaned up to make it easier to understand.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the third of multiple changes to git-worktree.txt, restricted to
the OPTIONS section.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the second of multiple changes to git-worktree.txt, restricted
to the COMMANDS section.
There is some language around the movement of "the working tree of a
linked worktree" which is used once, but the remaining uses are left as
just moving "a linked worktree" for brevity.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the first of multiple changes to git-worktree.txt, restricted to
the DESCRIPTION section.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extensions.worktreeConfig extension was added in 58b284a (worktree:
add per-worktree config files, 2018-10-21) and was somewhat documented
in Documentation/git-config.txt. However, the extensions.worktreeConfig
value was not specified further in the list of possible config keys. The
location of the config.worktree file is not specified, and there are
some precautions that should be mentioned clearly, but are only
mentioned in git-worktree.txt.
Expand the documentation to help users discover the complexities of
extensions.worktreeConfig by adding details and cross links in these
locations (relative to Documentation/):
- config/extensions.txt
- git-config.txt
- git-worktree.txt
The updates focus on items such as
* $GIT_DIR/config.worktree takes precedence over $GIT_COMMON_DIR/config.
* The core.worktree and core.bare=true settings are incorrect to have in
the common config file when extensions.worktreeConfig is enabled.
* The sparse-checkout settings core.sparseCheckout[Cone] are recommended
to be set in the worktree config.
As documented in 11664196ac ("Revert "check_repository_format_gently():
refuse extensions for old repositories"", 2020-07-15), this extension
must be considered regardless of the repository format version for
historical reasons.
A future change will update references to extensions.worktreeConfig
within git-sparse-checkout.txt, but a behavior change is needed before
making those updates.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When verbose mode was added to `git worktree list` by 076b444a62
(worktree: teach `list` verbose mode, 2021-01-27), although the
documentation was updated to reflect the new functionality, the
synopsis was overlooked. Correct this minor oversight.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add --lock" learned to record why the worktree is
locked with a custom message.
* sm/worktree-add-lock:
worktree: teach `add` to accept --reason <string> with --lock
worktree: mark lock strings with `_()` for translation
t2400: clean up '"add" worktree with lock' test
The default reason stored in the lock file, "added with --lock",
is unlikely to be what the user would have given in a separate
`git worktree lock` command. Allowing `--reason` to be specified
along with `--lock` when adding a working tree gives the user control
over the reason for locking without needing a second command.
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree list" annotates each worktree according to its state such
as "prunable" or "locked", however it is not immediately obvious why
these worktrees are being annotated. For prunable worktrees a reason
is available that is returned by should_prune_worktree() and for locked
worktrees a reason might be available provided by the user via `lock`
command.
Let's teach "git worktree list" a --verbose mode that outputs the reason
why the worktrees are being annotated. The reason is a text that can take
virtually any size and appending the text on the default columned format
will make it difficult to extend the command with other annotations and
not fit nicely on the screen. In order to address this shortcoming the
annotation is then moved to the next line indented followed by the reason
If the reason is not available the annotation stays on the same line as
the worktree itself.
The output of "git worktree list" with verbose becomes like so:
$ git worktree list --verbose
...
/path/to/locked-no-reason acb124 [branch-a] locked
/path/to/locked-with-reason acc125 [branch-b]
locked: worktree with a locked reason
/path/to/prunable-reason ace127 [branch-d]
prunable: gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git worktree list" command shows the absolute path to the worktree,
the commit that is checked out, the name of the branch, and a "locked"
annotation if the worktree is locked, however, it does not indicate
whether the worktree is prunable.
The "prune" command will remove a worktree if it is prunable unless
`--dry-run` option is specified. This could lead to a worktree being
removed without the user realizing before it is too late, in case the
user forgets to pass --dry-run for instance. If the "list" command shows
which worktree is prunable, the user could verify before running
"git worktree prune" and hopefully prevents the working tree to be
removed "accidentally" on the worse case scenario.
Let's teach "git worktree list" to show when a worktree is a prunable
candidate for both default and porcelain format.
In the default format a "prunable" text is appended:
$ git worktree list
/path/to/main aba123 [main]
/path/to/linked 123abc [branch-a]
/path/to/prunable ace127 (detached HEAD) prunable
In the --porcelain format a prunable label is added followed by
its reason:
$ git worktree list --porcelain
...
worktree /path/to/prunable
HEAD abc1234abc1234abc1234abc1234abc1234abc12
detached
prunable gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) taught "git worktree list" to annotate locked worktrees by
appending "locked" text to its output, however, this is not listed in
the --porcelain format.
Teach "list --porcelain" to do the same and add a "locked" attribute
followed by its reason, thus making both default and porcelain format
consistent. If the locked reason is not available then only "locked"
is shown.
The output of the "git worktree list --porcelain" becomes like so:
$ git worktree list --porcelain
...
worktree /path/to/locked
HEAD 123abcdea123abcd123acbd123acbda123abcd12
detached
locked
worktree /path/to/locked-with-reason
HEAD abc123abc123abc123abc123abc123abc123abc1
detached
locked reason why it is locked
...
In porcelain mode, if the lock reason contains special characters
such as newlines, they are escaped with backslashes and the entire
reason is enclosed in double quotes. For example:
$ git worktree list --porcelain
...
locked "worktree's path mounted in\nremovable device"
...
Furthermore, let's update the documentation to state that some
attributes in the porcelain format might be listed alone or together
with its value depending whether the value is available or not. Thus
documenting the case of the new "locked" attribute.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git worktree repair` knows how to repair the two-way links between the
repository and a worktree as long as a link in one or the other
direction is sound. For instance, if a linked worktree is moved (without
using `git worktree move`), repair is possible because the worktree
still knows the location of the repository even though the repository no
longer knows where the worktree is. Similarly, if the repository is
moved, repair is possible since the repository still knows the locations
of the worktrees even though the worktrees no longer know where the
repository is.
However, if both the repository and the worktrees are moved, then links
are severed in both directions, and no repair is possible. This is the
case even when the new worktree locations are specified as arguments to
`git worktree repair`. The reason for this limitation is twofold. First,
when `repair` consults the worktree's gitfile (/path/to/worktree/.git)
to determine the corresponding <repo>/worktrees/<id>/gitdir file to fix,
<repo> is the old path to the repository, thus it is unable to fix the
`gitdir` file at its new location since it doesn't know where it is.
Second, when `repair` consults <repo>/worktrees/<id>/gitdir to find the
location of the worktree's gitfile (/path/to/worktree/.git), the path
recorded in `gitdir` is the old location of the worktree's gitfile, thus
it is unable to repair the gitfile since it doesn't know where it is.
Fix these shortcomings by teaching `repair` to attempt to infer the new
location of the <repo>/worktrees/<id>/gitdir file when the location
recorded in the worktree's gitfile has become stale but the file is
otherwise well-formed. The inference is intentionally simple-minded.
For each worktree path specified as an argument, `git worktree repair`
manually reads the ".git" gitfile at that location and, if it is
well-formed, extracts the <id>. It then searches for a corresponding
<id> in <repo>/worktrees/ and, if found, concludes that there is a
reasonable match and updates <repo>/worktrees/<id>/gitdir to point at
the specified worktree path. In order for <repo> to be known, `git
worktree repair` must be run in the main worktree or bare repository.
`git worktree repair` first attempts to repair each incoming
/path/to/worktree/.git gitfile to point at the repository, and then
attempts to repair outgoing <repo>/worktrees/<id>/gitdir files to point
at the worktrees. This sequence was chosen arbitrarily when originally
implemented since the order of fixes is immaterial as long as one side
of the two-way link between the repository and a worktree is sound.
However, for this new repair technique to work, the order must be
reversed. This is because the new inference mechanism, when it is
successful, allows the outgoing <repo>/worktrees/<id>/gitdir file to be
repaired, thus fixing one side of the two-way link. Once that side is
fixed, the other side can be fixed by the existing repair mechanism,
hence the order of repairs is now significant.
Two safeguards are employed to avoid hijacking a worktree from a
different repository if the user accidentally specifies a foreign
worktree as an argument. The first, as described above, is that it
requires an <id> match between the repository and the worktree. That
itself is not foolproof for preventing hijack, so the second safeguard
is that the inference will only kick in if the worktree's
/path/to/worktree/.git gitfile does not point at a repository.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git worktree list" shows the absolute path to the working tree,
the commit that is checked out and the name of the branch. It is not
immediately obvious which of the worktrees, if any, are locked.
"git worktree remove" refuses to remove a locked worktree with
an error message. If "git worktree list" told which worktrees
are locked in its output, the user would not even attempt to
remove such a worktree, or would realize that
"git worktree remove -f -f <path>" is required.
Teach "git worktree list" to append "locked" to its output.
The output from the command becomes like so:
$ git worktree list
/path/to/main abc123 [master]
/path/to/worktree 456def (detached HEAD)
/path/to/locked-worktree 123abc (detached HEAD) locked
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add" learns that the "-d" is a synonym to "--detach"
option to create a new worktree without being on a branch.
* es/wt-add-detach:
git-worktree.txt: discuss branch-based vs. throwaway worktrees
worktree: teach `add` to recognize -d as shorthand for --detach
git-checkout.txt: document -d short option for --detach
By default, `git worktree add` creates a new worktree associated with a
particular branch (which may have been created automatically if not
specified explicitly on the command-line). It is also convenient to
create throwaway worktrees not associated with any branch, which can be
handy when making experimental changes or doing testing. However, the
latter use-case may not be obvious to newcomers since the high-level
description of worktrees talks only about checking out "more than one
branch at a time". Therefore, enhance the description to to discuss both
use-cases.
A secondary goal of highlighting the distinction between branch-based
and throwaway worktrees is to help newcomers understand that the
simplest form `git worktree add <path>` automatically creates a new
branch. Stating this early in the description, may help newcomers avoid
creating branches without realizing they are doing so, and later
wondering why `git branch --list` shows branches the user did not
intentionally create.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like `git switch` and `git checkout`, `git worktree add` can check out a
branch or set up a detached HEAD. However, unlike those other commands,
`git worktree add` does not understand -d as shorthand for --detach,
which may confound users accustomed to using -d for this purpose.
Address this shortcoming by teaching `add` to recognize -d for --detach,
thus bringing it in line with the other commands.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .git/worktrees/<id>/gitdir file points at the location of a linked
worktree's .git file. Its content must be of the form
/path/to/worktree/.git (from which the location of the worktree itself
can be derived by stripping the "/.git" suffix). If the gitdir file is
deleted or becomes corrupted or outdated, then Git will be unable to
find the linked worktree. An easy way for the gitdir file to become
outdated is for the user to move the worktree manually (without using
"git worktree move"). Although it is possible to manually update the
gitdir file to reflect the new linked worktree location, doing so
requires a level of knowledge about worktree internals beyond what a
user should be expected to know offhand.
Therefore, teach "git worktree repair" how to repair broken or outdated
.git/worktrees/<id>/gitdir files automatically. (For this to work, the
command must either be invoked from within the worktree whose gitdir
file requires repair, or from within the main or any linked worktree by
providing the path of the broken worktree as an argument to "git
worktree repair".)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .git file in a linked worktree is a "gitfile" which points back to
the .git/worktrees/<id> entry in the main worktree or bare repository.
If a worktree's .git file is deleted or becomes corrupted or outdated,
then the linked worktree won't know how to find the repository or any of
its own administrative files (such as 'index', 'HEAD', etc.). An easy
way for the .git file to become outdated is for the user to move the
main worktree or bare repository. Although it is possible to manually
update each linked worktree's .git file to reflect the new repository
location, doing so requires a level of knowledge about worktree
internals beyond what a user should be expected to know offhand.
Therefore, teach "git worktree repair" how to repair broken or outdated
worktree .git files automatically. (For this to work, the command must
be invoked from within the main worktree or bare repository, or from
within a worktree which has not become disconnected from the repository
-- such as one which was created after the repository was moved.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Worktree administrative files can become corrupted or outdated due to
external factors. Although, it is often possible to recover from such
situations by hand-tweaking these files, doing so requires intimate
knowledge of worktree internals. While information necessary to make
such repairs manually can be obtained from git-worktree.txt and
gitrepository-layout.txt, we can assist users more directly by teaching
git-worktree how to repair its administrative files itself (at least to
some extent). Therefore, add a "git worktree repair" command which
attempts to correct common problems which may arise due to factors
beyond Git's control.
At this stage, the "repair" command is a mere skeleton; subsequent
commits will flesh out the functionality.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When citing other Git commands, rather than merely formatting them with
a fixed-width typeface, improve the reader experience by linking to them
directly via `linkgit:`.
Suggested-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading the rendered description of `add`, it's easy to trip over
and miss the end of one sentence and the start of the next, making it
seem as if they are part of the same statement, separated only by a
dash:
... specific files such as HEAD, index, etc. - may also be
specified as <commit-ish>; it is synonymous with...
This can be particularly confusing since the thoughts expressed by the
two sentences are unrelated. Reduce the likelihood of confusion by
making it obvious that the two sentences are distinct.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a few grammatical problems to improve the reading experience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As originally composed, git-worktree.txt employed a mix of "worktree"
and "working tree" which was inconsistent and potentially confusing to
readers. bc483285b7 (Documentation/git-worktree: consistently use term
"linked working tree", 2015-07-20) undertook the task of employing the
term "working tree" consistently throughout the document and avoiding
"worktree" altogether for descriptive text. Since that time, some
instances of "worktree" have crept back in. Continue the work of
bc483285b7 by transforming these to "working tree", as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree documentation generally does a good job of formatting
literal text using a fixed-width typeface, however, some instances of
unformatted literal text have crept in over time. Fix these.
While at it, also fix a few incorrect typefaces resulting from wrong
choice of Asciidoc quotes.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add" takes special care to avoid creating a new worktree
at a location already registered to an existing worktree even if that
worktree is missing (which can happen, for instance, if the worktree
resides on removable media). "git worktree move", however, is not so
careful when validating the destination location and will happily move
the source worktree atop the location of a missing worktree. This leads
to the anomalous situation of multiple worktrees being associated with
the same path, which is expressly forbidden by design. For example:
$ git clone foo.git
$ cd foo
$ git worktree add ../bar
$ git worktree add ../baz
$ rm -rf ../bar
$ git worktree move ../baz ../bar
$ git worktree list
.../foo beefd00f [master]
.../bar beefd00f [bar]
.../bar beefd00f [baz]
$ git worktree remove ../bar
fatal: validation failed, cannot remove working tree:
'.../bar' does not point back to '.git/worktrees/bar'
Fix this shortcoming by enhancing "git worktree move" to perform the
same additional validation of the destination directory as done by "git
worktree add".
While at it, add a test to verify that "git worktree move" won't move a
worktree atop an existing (non-worktree) path -- a restriction which has
always been in place but was never tested.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.
* nd/per-worktree-ref-iteration:
git-worktree.txt: correct linkgit command name
reflog expire: cover reflog from all worktrees
fsck: check HEAD and reflog from other worktrees
fsck: move fsck_head_link() to get_default_heads() to avoid some globals
revision.c: better error reporting on ref from different worktrees
revision.c: correct a parameter name
refs: new ref types to make per-worktree refs visible to all worktrees
Add a place for (not) sharing stuff between worktrees
refs.c: indent with tabs, not spaces
A fourth class of configuration files (in addition to the
traditional "system wide", "per user in the $HOME directory" and
"per repository in the $GIT_DIR/config") has been introduced so
that different worktrees that share the same repository (hence the
same $GIT_DIR/config file) can use different customization.
* nd/per-worktree-config:
worktree: add per-worktree config files
t1300: extract and use test_cmp_config()
Noticed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Defined delimiters for 'git worktree list --porcelain' make the format
easier to parse in scripts. For example
sed -n '/^worktree ID$/,/^$/p'
extracts only the information for the worktree 'ID'.
The format did not changed since [1], only the guaranty is added.
[1] bb9c03b82a (worktree: add 'list' command, 2015-10-08)
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the problems with multiple worktree is accessing per-worktree
refs of one worktree from another worktree. This was sort of solved by
multiple ref store, where the code can open the ref store of another
worktree and has access to the ref space of that worktree.
The problem with this is reporting. "HEAD" in another ref space is
also called "HEAD" like in the current ref space. In order to
differentiate them, all the code must somehow carry the ref store
around and print something like "HEAD from this ref store".
But that is not feasible (or possible with a _lot_ of work). With the
current design, we pass a reference around as a string (so called
"refname"). Extending this design to pass a string _and_ a ref store
is a nightmare, especially when handling extended SHA-1 syntax.
So we do it another way. Instead of entering a separate ref space, we
make refs from other worktrees available in the current ref space. So
"HEAD" is always HEAD of the current worktree, but then we can have
"worktrees/blah/HEAD" to denote HEAD from a worktree named
"blah". This syntax coincidentally matches the underlying directory
structure which makes implementation a bit easier.
The main worktree has to be treated specially because well... it's
special from the beginning. So HEAD from the main worktree is
acccessible via the name "main-worktree/HEAD" instead of
"worktrees/main/HEAD" because "main" could be just another secondary
worktree.
This patch also makes it possible to specify refs from one worktree in
another one, e.g.
git log worktrees/foo/HEAD
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new repo extension is added, worktreeConfig. When it is present:
- Repository config reading by default includes $GIT_DIR/config _and_
$GIT_DIR/config.worktree. "config" file remains shared in multiple
worktree setup.
- The special treatment for core.bare and core.worktree, to stay
effective only in main worktree, is gone. These config settings are
supposed to be in config.worktree.
This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).
This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).
"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes still go to "config", not "config.worktree". A
new option --worktree is added for that (*).
Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".
This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.
(*) "git config --worktree" points back to "config" file when this
extension is not present and there is only one worktree so that it
works in any both single and multiple worktree setups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple worktrees are used, we need rules to determine if
something belongs to one worktree or all of them. Instead of keeping
adding rules when new stuff comes (*), have a generic rule:
- Inside $GIT_DIR, which is per-worktree by default, add
$GIT_DIR/common which is always shared. New features that want to
share stuff should put stuff under this directory.
- Inside refs/, which is shared by default except refs/bisect, add
refs/worktree/ which is per-worktree. We may eventually move
refs/bisect to this new location and remove the exception in refs
code.
(*) And it may also include stuff from external commands which will
have no way to modify common/per-worktree rules.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For consistency with "add -f -f" and "move -f -f" which override
the lock on a worktree, allow "remove -f -f" to do so, as well, as a
convenience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For consistency with "add -f -f", which allows a missing but locked
worktree path to be re-used, allow "move -f -f" to override a lock,
as well, as a convenience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For safety, "git worktree add <path>" will refuse to add a new
worktree at <path> if <path> is already associated with a worktree
entry, even if <path> is missing (for instance, has been deleted or
resides on non-mounted removable media or network share). The typical
way to re-create a worktree at <path> in such a situation is either to
prune all "broken" entries ("git worktree prune") or to selectively
remove the worktree entry manually ("git worktree remove <path>").
However, neither of these approaches ("prune" nor "remove") is
especially convenient, and they may be unsuitable for scripting when a
tool merely wants to re-use a worktree if it exists or create it from
scratch if it doesn't (much as a tool might use "mkdir -p" to re-use
or create a directory).
Therefore, teach 'add' to respect --force as a convenient way to
re-use a path already associated with a worktree entry if the path is
non-existent. For a locked worktree, require --force to be specified
twice.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the '--quiet' option to git worktree, as for the other git
commands. 'add' is the only command affected by it since all other
commands, except 'list', are currently silent by default.
[jc: appiled trivial fix-up to keep the tests from touching outside
the scratch area]
Helped-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a checkout.defaultRemote setting which can be used to
designate a remote to prefer (via checkout.defaultRemote=origin) when
running e.g. "git checkout master" to mean origin/master, even though
there's other remotes that have the "master" branch.
I want this because it's very handy to use this workflow to checkout a
repository and create a topic branch, then get back to a "master" as
retrieved from upstream:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git checkout master
)
That will output:
Branch 'master' set up to track remote branch 'master' from 'origin'.
Switched to a new branch 'master'
But as soon as a new remote is added (e.g. just to inspect something
from someone else) the DWIMery goes away:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git remote add avar git@github.com:avar/tbdiff.git &&
git fetch avar &&
git checkout master
)
Will output (without the advice output added earlier in this series):
error: pathspec 'master' did not match any file(s) known to git.
The new checkout.defaultRemote config allows me to say that whenever
that ambiguity comes up I'd like to prefer "origin", and it'll still
work as though the only remote I had was "origin".
Also adjust the advice.checkoutAmbiguousRemoteBranchName message to
mention this new config setting to the user, the full output on my
git.git is now (the last paragraph is new):
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
hint:
hint: If you'd like to always have checkouts of an ambiguous <name> prefer
hint: one remote, e.g. the 'origin' remote, consider setting
hint: checkout.defaultRemote=origin in your config.
I considered splitting this into checkout.defaultRemote and
worktree.defaultRemote, but it's probably less confusing to break our
own rules that anything shared between config should live in core.*
than have two config settings, and I couldn't come up with a short
name under core.* that made sense (core.defaultRemoteForCheckout?).
See also 70c9ac2f19 ("DWIM "git checkout frotz" to "git checkout -b
frotz origin/frotz"", 2009-10-18) which introduced this DWIM feature
to begin with, and 4e85333197 ("worktree: make add <path> <branch>
dwim", 2017-11-26) which added it to git-worktree.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add" learned to check out an existing branch.
* tg/worktree-add-existing-branch:
worktree: teach "add" to check out existing branches
worktree: factor out dwim_branch function
worktree: improve message when creating a new worktree
worktree: remove extra members from struct add_opts
