When no merge.tool or diff.tool is configured or manually selected, the
selection of a default tool is sensitive to the DISPLAY variable; in a
GUI session a gui-specific tool will be proposed if found, and
otherwise a terminal-based one. This "GUI-optimizing" behavior is
important because a GUI can make a huge difference to a user's ability
to understand and correctly complete a non-trivial conflicting merge.
Some time ago the merge.guitool and diff.guitool config options were
introduced to enable users to configure both a GUI tool, and a non-GUI
tool (with fallback if no GUI tool configured), in the same environment.
Unfortunately, the --gui argument introduced to support the selection of
the guitool is still explicit. When using configured tools, there is no
equivalent of the no-tool-configured "propose a GUI tool if we are in a GUI
environment" behavior.
As proposed in <xmqqmtb8jsej.fsf@gitster.g>, introduce new configuration
options, difftool.guiDefault and mergetool.guiDefault, supporting a special
value "auto" which causes the corresponding tool or guitool to be selected
depending on the presence of a non-empty DISPLAY value. Also support "true"
to say "default to the guitool (unless --no-gui is passed on the
commandline)", and "false" as the previous default behavior when these new
configuration options are not specified.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The paths generated by difftool are passed to user-facing diff tools.
Using paths with repeated slashes in them is a cosmetic blemish that
is exposed to users and can be avoided.
Use a strbuf to create the buffer used for the dir-diff tmpdir.
Strip trailing slashes from the value read from TMPDIR to avoid
repeated slashes in the generated paths.
Adjust the error handling to avoid leaking strbufs and to avoid
returning -1 to cmd_main().
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The difftool dir-diff mode handles symlinks by replacing them with their
readlink(2) values. This allows diff tools to see changes to symlinks
as if they were regular text diffs with the old and new path values.
This is analogous to what "git diff" displays when symlinks change.
The temporary diff directories that are created initially contain
symlinks because they get checked-out using a temporary index that
retains the original symlinks as checked-in to the repository.
A bug was introduced when difftool was rewritten in C that made
difftool write the readlink(2) contents into the pointed-to file rather
than the symlink itself. The write was going through the symlink and
writing to its target rather than writing to the symlink path itself.
Replace symlinks with raw text files by unlinking the symlink path
before writing the readlink(2) content into them.
When 18ec800512 (difftool: handle modified symlinks in dir-diff mode,
2017-03-15) added handling for modified symlinks this bug got recorded
in the test suite. The tests included the pointed-to symlink target
paths. These paths were being reported because difftool was erroneously
writing to them, but they should have never been reported nor written.
Correct the modified-symlinks test cases by removing the target files
from the expected output.
Add a test to ensure that symlinks are written with the readlink(2)
values and that the target files contain their original content.
Reported-by: Alan Blotz <work@blotz.org>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing spaces before '&&' and switch tabs around '&&' to spaces.
These issues were found using `git grep '[^ ]&&$'` and
`git grep -P '&&\t'`.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git difftool` only allow us to select file to view in turn.
If there is a commit with many files and we exit in the middle,
we will have to traverse list again to get the file diff which
we want to see. Therefore,teach the command an option
`--skip-to=<path>` to allow the user to say that diffs for earlier
paths are not interesting (because they were already seen in an
earlier session) and start this session with the named path.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a bunch of test cases in 't7800-difftool.sh' we 'grep' for specific
filenames in 'git difftool's output, and those test cases are prone to
occasional failures because those filenames might be part of the name
of difftool's temporary directory as well, e.g.:
+git difftool --dir-diff --no-symlinks --extcmd ls v1
+grep sub output
+test_line_count = 2 sub-output
test_line_count: line count for sub-output != 2
/tmp/git-difftool.Ssubfq/left/:
sub
/tmp/git-difftool.Ssubfq/right/:
sub
error: last command exited with $?=1
not ok 50 - difftool --dir-diff v1 from subdirectory --no-symlinks
Fix this by tightening the 'grep' patterns looking for those
interesting filenames to match only lines where a filename stands on
its own.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Excluding t7817, which is added in an unrelated patch series at the time
of writing, this adjusts t7[5-9]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[5-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new test added by the previous commit can be simplified a lot.
Let's do so.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jinoh Kang <luke1337@theori.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 3aef54e8b8 ("diff: munmap() file contents before running external
diff") introduced calls to diff_free_filespec_data in
run_external_diff, which may pass NULL pointers.
Fix this and prevent any such bugs in the future by making
`diff_free_filespec_data(NULL)` a no-op.
Fixes: 3aef54e8b8 ("diff: munmap() file contents before running external diff")
Signed-off-by: Jinoh Kang <luke1337@theori.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In https://github.com/git-for-windows/git/issues/2677, a `git difftool
-d` problem was reported. The underlying cause was a bug in `git
diff-files --raw` that we just fixed: it reported intent-to-add files
with the empty _tree_ as the post-image OID, when we need to show
an all-zero (or, "null") OID instead, to indicate to the caller that
they have to look at the worktree file.
The symptom of that problem shown by `git difftool` was this:
error: unable to read sha1 file of <path> (<empty-tree-OID>)
error: could not write '<filename>'
Make sure that the reported `difftool` problem stays fixed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test in t7800 tries to make sure that when git-difftool runs an
external tool that fails, it stops looking at files. Our fake failing
tool prints the file name it was asked to diff before exiting non-zero,
and then we confirm the output contains only that file.
However, this subtly relies on our internal reuse_worktree_file().
Because we're diffing between branches, the command run by difftool
might see:
- the git-stored filename (e.g., "file"), if we decided that the
working tree contents were up-to-date with the object in the index
and HEAD, and we could reuse them
- a temporary filename (e.g. "/tmp/abc123_file") if we had to dump the
contents from the object database
If the latter case happens, then the test fails, because it's expecting
the string "file". I discovered this when debugging something unrelated
with reuse_worktree_file(). I _thought_ it should be able to be
triggered by a racy-git situation, but running:
./t7800-difftool.sh --stress --run=2,13
never seems to fail. However, by my reading of reuse_worktree_file(),
this would probably always fail under Cygwin, because it sets
NO_FAST_WORKING_DIRECTORY. At any rate, since reuse_worktree_file()
is meant to be an optimization that may or may not trigger, our test
should be robust either way.
Instead of checking the filename, let's just make sure we got a single
line of output (which would not be true if we continued after the first
failure).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "git difftool" and "git mergetool" so that the combinations
of {diff,merge}.{tool,guitool} configuration variables serve as
fallback settings of each other in a sensible order.
* dl/difftool-mergetool:
difftool: fallback on merge.guitool
difftool: make --gui, --tool and --extcmd mutually exclusive
mergetool: fallback to tool when guitool unavailable
mergetool--lib: create gui_mode function
mergetool: use get_merge_tool function
t7610: add mergetool --gui tests
t7610: unsuppress output
In git-difftool.txt, it says
'git difftool' falls back to 'git mergetool' config variables when the
difftool equivalents have not been defined.
However, when `diff.guitool` is missing, it doesn't fallback to
anything. Make git-difftool fallback to `merge.guitool` when `diff.guitool` is
missing.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-difftool, these options specify which tool to ultimately run. As
a result, they are logically conflicting. Explicitly disallow these
options from being used together.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As far as this developer can tell, the conversion from a Perl script to
a built-in caused the regression in the difftool that it no longer runs
outside of a Git worktree (with `--no-index`, of course).
It is a bit embarrassing that it took over two years after retiring the
Perl version to discover this regression, but at least we now know, and
can do something, about it.
This fixes https://github.com/git-for-windows/git/issues/2123
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-options can unambiguously find an abbreviation only if it sees
all available options. This is usually the case when you use
parse_options(). But there are other callers like blame or shortlog
which uses parse_options_start() in combination with a custom option
parser, like rev-list. parse-options cannot see all options in this
case and will get abbrev detection wrong. Disable it.
t7800 needs update because --symlink no longer expands to --symlinks
and will be passed down to git-diff, which will not recognize it. I
still think this is the correct thing to do. But if --symlink has been
actually used in the wild, we would just add an option alias for it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing a command-line to call an external diff command to the
difftool, we must be prepared for paths containing special characters,
e.g. backslashes in the temporary directory's path on Windows.
This patch is needed in preparation for the next commit, which will
make the MinGW version of Git *not* rewrite TMP to use forward slashes
instead of backslashes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix various places where the ordering was obviously wrong, meaning it
was easy to find with grep.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GETTEXT_POISON=YesPlease compile-time testing option added in my
bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly
translator", 2011-02-22) has been slowly bitrotting as strings have
been marked for translation, and new tests have been added without
running it.
I brought this up on the list ("[BUG] test suite broken with
GETTEXT_POISON=YesPlease", [1]) asking whether this mode was useful at
all anymore. At least one person occasionally uses it, and Lars
Schneider offered to change one of the the Travis builds to run in
this mode, so fix up the failing ones.
My test setup runs most of the tests, with the notable exception of
skipping all the p4 tests, so it's possible that there's still some
lurking regressions I haven't fixed.
1. <CACBZZX62+acvi1dpkknadTL827mtCm_QesGSZ=6+UnyeMpg8+Q@mail.gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The left and right base directories were pointed to the buf field of
two strbufs, which were subject to change.
A contrived test case shows the problem where a file with a long enough
name to force the strbuf to grow is up-to-date (hence the code path is
used where the work tree's version of the file is reused), and then a
file that is not up-to-date needs to be written (hence the code path is
used where checkout_entry() uses the previously recorded base_dir that
is invalid by now).
Let's just copy the base_dir strings for use with checkout_entry(),
never touch them until the end, and release them then. This is an easily
verifiable fix (as opposed to the next-obvious alternative: to re-set
base_dir after every loop iteration).
This fixes https://github.com/git-for-windows/git/issues/1124
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect the null object ID for symlinks in dir-diff so that difftool can
detect when symlinks are modified in the worktree.
Previously, a null symlink object ID would crash difftool.
Handle null object IDs as unknown content that must be read from
the worktree.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make t7800 easier to debug by capturing output into temporary files and
using test_line_count to make assertions on those files.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "test_line_count" instead of "wc -l", use "git -C" instead of a
subshell, and use test_expect_code when calling difftool. Ease
debugging by capturing output into temporary files.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git difftool -h" reports an error:
fatal: BUG: setup_git_env called without repository
Defer repository setup so that the help option processing happens before
the repository is initialized.
Add tests to ensure that the basic usage works inside and outside of a
repository.
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It served its purpose, but now we have a builtin difftool. Time for the
Perl script to enjoy Florida.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a builtin difftool that still falls back to the legacy Perl
version, which has been renamed to `legacy-difftool`.
The idea is that the new, experimental, builtin difftool immediately hands
off to the legacy difftool for now, unless the config variable
difftool.useBuiltin is set to true.
This feature flag will be used in the upcoming Git for Windows v2.11.0
release, to allow early testers to opt-in to use the builtin difftool and
flesh out any bugs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9ec26e7977 (difftool: fix argument handling in subdirs, 2016-07-18)
corrected how path arguments are handled in a subdirectory, but
it introduced a regression in how entries outside of the
subdirectory are handled by dir-diff.
When preparing the right-side of the diff we only include the
changed paths in the temporary area.
The left side of the diff is constructed from a temporary
index that is built from the same set of changed files, but it
was being constructed from within the subdirectory. This is a
problem because the indexed paths are toplevel-relative, and
thus they were not getting added to the index.
Teach difftool to chdir to the toplevel of the repository before
preparing its temporary indexes. This ensures that all of the
toplevel-relative paths are valid.
Add test cases to more thoroughly exercise this scenario.
Reported-by: Frank Becker <fb@mooflu.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the moment difftool's "trust exit code" logic always suppresses the
exit status of the diff utility we invoke. This is useful because we
don't want to exit just because diff returned "1" because the files
differ, but it's confusing if the shell returns an error because the
selected diff utility is not found.
POSIX specifies 127 as the exit status for "command not found", 126 for
"command found but is not executable" and values greater than 128 if the
command terminated because it received a signal [1] and at least bash
and dash follow this specification, while diff utilities generally use
"1" for the exit status we want to ignore.
Handle any value of 126 or greater as a special value indicating that
some form of fatal error occurred.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_08_02
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git difftool <paths>..." started in a subdirectory failed to
interpret the paths relative to that directory, which has been
fixed.
* jk/difftool-in-subdir:
difftool: use Git::* functions instead of passing around state
difftool: avoid $GIT_DIR and $GIT_WORK_TREE
difftool: fix argument handling in subdirs
Environment variables are global and hard to reason about.
Use the `--git-dir` and `--work-tree` arguments when invoking `git`
instead of relying on the environment.
Add a test to ensure that difftool's dir-diff feature works when these
variables are present in the environment.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One among four invocations of readlink(1) in our test suite has
been rewritten so that the test can run on systems without the
command (others are in valgrind test framework and t9802).
* ak/t7800-wo-readlink:
t7800: readlink may not be available
The readlink(1) command is not available on all platforms (notably
not on AIX and HP-UX) and can be replaced in this test with the
"workaround"
ls -ld <name> | sed -e 's/.* -> //'
This is no universal readlink replacement but works in the
controlled test environment well enough.
Signed-off-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When files are unmerged they can show up as both unmerged and
modified in the output of `git diff --raw`. This causes
difftool's dir-diff to create filesystem entries for the same
path twice, which fails when it encounters a duplicate path.
Ensure that each worktree path is only processed once.
Add a test to demonstrate the breakage.
Reported-by: Jan Smets <jan@smets.cx>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every yes/no question in difftool/mergetool scripts has slightly
different form, and none of them is consistent with the form git
itself uses.
Make the form of all the questions consistent with the form used
by git.
Reviewed-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Nikola Forró <nforro@redhat.com>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Git for Windows' SDK, the tests are run using a Bash that relies on
the POSIX emulation layer MSYS2 (itself a friendly fork of Cygwin). As
such, paths in tests can be POSIX paths. As soon as those paths are
passed to git.exe (which does *not* use the POSIX emulation layer),
those paths are converted into Windows paths, though. This happens
for command-line parameters, but not when reading, say, config variables.
To help with that, the `pwd` command is overridden to return the Windows
path of the current working directory when testing Git on Windows.
However, when talking to anything using the POSIX emulation layer, it is
really much better to use POSIX paths because Windows paths contain a
colon after the drive letter that will easily be mistaken for the common
separator in path lists.
So let's just use the $PWD variable when the POSIX path is needed.
This lets t7800-difftool.sh, t9400-git-cvsserver-server.sh,
t9402-git-cvsserver-refs.sh and t9401-git-cvsserver-crlf.sh pass in Git
for Windows' SDK.
Note: the cvsserver tests require not only the `cvs` package (install
it into Git for Windows' SDK via `pacman -S cvs`) but also the Perl
SQLite bindings (install them into Git for Windows' SDK via
`cpan DBD::SQLite`).
This patch is based on earlier work by 마누엘 and Karsten Blees.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because "test_when_finished" in our test framework queues the
clean-up tasks to be done in a shell variable, it should not be
used inside a subshell. Add a mechanism to allow 'bash' to catch
such uses, and fix the ones that were found.
* jk/test-lint-forbid-when-finished-in-subshell:
test-lib-functions: detect test_when_finished in subshell
t7800: don't use test_config in a subshell
test-lib-functions: support "test_config -C <dir> ..."
t5801: don't use test_when_finished in a subshell
t7610: don't use test_config in a subshell