"git -c grep.patternType=extended log --basic-regexp" misbehaved
because the internal API to access the grep machinery was not
designed well.
* jc/grep-commandline-vs-configuration:
grep: further simplify setting the pattern type
The cherry_pick_list was looping through the original side checking the
seen indicator and setting the cherry_flag on the commit. If we save
off the commit in the patch_id we can set the cherry_flag on the correct
commit when running through the other side when a patch_id match is found.
Signed-off-by: Kevin Willford <kcwillford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When c5c31d33 (grep: move pattern-type bits support to top-level
grep.[ch], 2012-10-03) introduced grep_commit_pattern_type() helper
function, the intention was to allow the users of grep API to having
to fiddle only with .pattern_type_option (which can be set to "fixed",
"basic", "extended", and "pcre"), and then immediately before compiling
the pattern strings for use, call grep_commit_pattern_type() to have
it prepare various bits in the grep_opt structure (like .fixed,
.regflags, etc.).
However, grep_set_pattern_type_option() helper function the grep API
internally uses were left as an external function by mistake. This
function shouldn't have been made callable by the users of the API.
Later when the grep API was used in revision traversal machinery,
the caller then mistakenly started calling the function around
34a4ae55 (log --grep: use the same helper to set -E/-F options as
"git grep", 2012-10-03), instead of setting the .pattern_type_option
field and letting the grep_commit_pattern_type() to take care of the
details.
This caused an unnecessary bug that made a configured
grep.patternType take precedence over the command line options
(e.g. --basic-regexp, --fixed-strings) in "git log" family of
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" learns log.showSignature configuration variable, and a
command line option "--no-show-signature" to countermand it.
* mj/log-show-signature-conf:
log: add log.showSignature configuration variable
log: add "--no-show-signature" command line option
t4202: refactor test
If an user creates an alias with "--show-signature" early in command
line, e.g.
[alias] logss = log --show-signature
then there is no way to countermand it through command line.
Teach git-log and related commands about "--no-show-signature" command
line option. This will make "git logss --no-show-signature" run
without showing GPG signature.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes a pointer to a pathspec structure, and releases
the resources held by it, but does not free() the structure itself.
Such a function should be called "clear", not "free".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move from unsigned char[20] to struct object_id continues.
* bc/object-id:
match-trees: convert several leaf functions to use struct object_id
tree-walk: convert tree_entry_extract() to use struct object_id
struct name_entry: use struct object_id instead of unsigned char sha1[20]
match-trees: convert shift_tree() and shift_tree_by() to use object_id
test-match-trees: convert to use struct object_id
sha1-name: introduce a get_oid() function
When "git log" shows the log message indented by 4-spaces, the
remainder of a line after a HT does not align in the way the author
originally intended. The command now expands tabs by default in
such a case, and allows the users to override it with a new option,
'--no-expand-tabs'.
* lt/pretty-expand-tabs:
pretty: test --expand-tabs
pretty: allow tweaking tabwidth in --expand-tabs
pretty: enable --expand-tabs by default for selected pretty formats
pretty: expand tabs in indented logs to make things line up properly
When the local convention of the project is to use tab width that is
not 8, it may make sense to allow "git log --expand-tabs=<n>" to
tweak the output to match it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --pretty={medium,full,fuller}" and "git log" by default
prepend 4 spaces to the log message, so it makes sense to enable
the new "expand-tabs" facility by default for these formats.
Add --no-expand-tabs option to override the new default.
The change alone breaks a test in t4201 that runs "git shortlog"
on the output from "git log", and expects that the output from
"git log" does not do such a tab expansion. Adjust the test to
explicitly disable expand-tabs with --no-expand-tabs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A commit log message sometimes tries to line things up using tabs,
assuming fixed-width font with the standard 8-place tab settings.
Viewing such a commit however does not work well in "git log", as
we indent the lines by prefixing 4 spaces in front of them.
This should all line up:
Column 1 Column 2
-------- --------
A B
ABCD EFGH
SPACES Instead of Tabs
Even with multi-byte UTF8 characters:
Column 1 Column 2
-------- --------
Ä B
åäö 100
A Møøse once bit my sister..
Tab-expand the lines in "git log --expand-tabs" output before
prefixing 4 spaces.
This is based on the patch by Linus Torvalds, but at this step, we
require an explicit command line option to enable the behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find a blob at "a/b/c", we currently pass this to
our show_object_fn callbacks as two components: "a/b/" and
"c". Callbacks which want the full value then call
path_name(), which concatenates the two. But this is an
inefficient interface; the path is a strbuf, and we could
simply append "c" to it temporarily, then roll back the
length, without creating a new copy.
So we could improve this by teaching the callsites of
path_name() this trick (and there are only 3). But we can
also notice that no callback actually cares about the
broken-down representation, and simply pass each callback
the full path "a/b/c" as a string. The callback code becomes
even simpler, then, as we do not have to worry about freeing
an allocated buffer, nor rolling back our modification to
the strbuf.
This is theoretically less efficient, as some callbacks
would not bother to format the final path component. But in
practice this is not measurable. Since we use the same
strbuf over and over, our work to grow it is amortized, and
we really only pay to memcpy a few bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we left name_path as a thin wrapper
around a strbuf. This patch drops it entirely. As a result,
every show_object_fn callback needs to be adjusted. However,
none of their code needs to be changed at all, because the
only use was to pass it to path_name(), which now handles
the bare strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "struct name_path" data is examined in only two places:
we generate it in process_tree(), and we convert it to a
single string in path_name(). Everyone else just passes it
through to those functions.
We can further note that process_tree() already keeps a
single strbuf with the leading tree path, for use with
tree_entry_interesting().
Instead of building a separate name_path linked list, let's
just use the one we already build in "base". This reduces
the amount of code (especially tricky code in path_name()
which did not check for integer overflows caused by deep
or large pathnames).
It is also more efficient in some instances. Any time we
were using tree_entry_interesting, we were building up the
strbuf anyway, so this is an immediate and obvious win
there. In cases where we were not, we trade off storing
"pathname/" in a strbuf on the heap for each level of the
path, instead of two pointers and an int on the stack (with
one pointer into the tree object). On a 64-bit system, the
latter is 20 bytes; so if path components are less than that
on average, this has lower peak memory usage. In practice
it probably doesn't matter either way; we are already
holding in memory all of the tree objects leading up to each
pathname, and for normal-depth pathnames, we are only
talking about hundreds of bytes.
This patch leaves "struct name_path" as a thin wrapper
around the strbuf, to avoid disrupting callbacks. We should
fix them, but leaving it out makes this diff easier to view.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rev-list" shows an object with its associated path
name, it does so by walking the name_path linked list and
printing each component (stopping at any embedded NULs or
newlines).
We'd like to eventually get rid of name_path entirely in
favor of a single buffer, and dropping this custom printing
code is part of that. As a first step, let's use path_name()
to format the list into a single buffer, and print that.
This is strictly less efficient than the original, but it's
a temporary step in the refactoring; our end game will be to
get the fully formatted name in the first place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find a blob at "a/b/c", we currently pass this to
our show_object_fn callbacks as two components: "a/b/" and
"c". Callbacks which want the full value then call
path_name(), which concatenates the two. But this is an
inefficient interface; the path is a strbuf, and we could
simply append "c" to it temporarily, then roll back the
length, without creating a new copy.
So we could improve this by teaching the callsites of
path_name() this trick (and there are only 3). But we can
also notice that no callback actually cares about the
broken-down representation, and simply pass each callback
the full path "a/b/c" as a string. The callback code becomes
even simpler, then, as we do not have to worry about freeing
an allocated buffer, nor rolling back our modification to
the strbuf.
This is theoretically less efficient, as some callbacks
would not bother to format the final path component. But in
practice this is not measurable. Since we use the same
strbuf over and over, our work to grow it is amortized, and
we really only pay to memcpy a few bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we left name_path as a thin wrapper
around a strbuf. This patch drops it entirely. As a result,
every show_object_fn callback needs to be adjusted. However,
none of their code needs to be changed at all, because the
only use was to pass it to path_name(), which now handles
the bare strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "struct name_path" data is examined in only two places:
we generate it in process_tree(), and we convert it to a
single string in path_name(). Everyone else just passes it
through to those functions.
We can further note that process_tree() already keeps a
single strbuf with the leading tree path, for use with
tree_entry_interesting().
Instead of building a separate name_path linked list, let's
just use the one we already build in "base". This reduces
the amount of code (especially tricky code in path_name()
which did not check for integer overflows caused by deep
or large pathnames).
It is also more efficient in some instances. Any time we
were using tree_entry_interesting, we were building up the
strbuf anyway, so this is an immediate and obvious win
there. In cases where we were not, we trade off storing
"pathname/" in a strbuf on the heap for each level of the
path, instead of two pointers and an int on the stack (with
one pointer into the tree object). On a 64-bit system, the
latter is 20 bytes; so if path components are less than that
on average, this has lower peak memory usage. In practice
it probably doesn't matter either way; we are already
holding in memory all of the tree objects leading up to each
pathname, and for normal-depth pathnames, we are only
talking about hundreds of bytes.
This patch leaves "struct name_path" as a thin wrapper
around the strbuf, to avoid disrupting callbacks. We should
fix them, but leaving it out makes this diff easier to view.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rev-list" shows an object with its associated path
name, it does so by walking the name_path linked list and
printing each component (stopping at any embedded NULs or
newlines).
We'd like to eventually get rid of name_path entirely in
favor of a single buffer, and dropping this custom printing
code is part of that. As a first step, let's use path_name()
to format the list into a single buffer, and print that.
This is strictly less efficient than the original, but it's
a temporary step in the refactoring; our end game will be to
get the fully formatted name in the first place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few options of "git diff" did not work well when the command was
run from a subdirectory.
* nd/diff-with-path-params:
diff: make -O and --output work in subdirectory
diff-no-index: do not take a redundant prefix argument
A few options of "git diff" did not work well when the command was
run from a subdirectory.
* nd/diff-with-path-params:
diff: make -O and --output work in subdirectory
diff-no-index: do not take a redundant prefix argument
Reading with getwholeline() and manually stripping the terminating
'\n' would leave CR at the end of the line if the input comes from
a DOS editor.
Constrasting this with the other changes around "--stdin" in this
series, one may realize that the way "log" family of commands read
the paths with "--stdin" looks inconsistent and sloppy. It does not
allow us to C-quote a textual input, neither does it accept records
that are NUL-terminated. These are unfortunately way too late to
fix X-<.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
When we unwrap a tag to find its commit for a traversal, we
do not propagate the "name" field of the tag in the pending
array (i.e., the ref name the user gave us in the first
place) to the commit (instead, we use an empty string). This
means that "git log --source" will never show the tag-name
for commits we reach through it.
This was broken in 2073949 (traverse_commit_list: support
pending blobs/trees with paths, 2014-10-15). That commit
tried to be careful and avoid propagating the path
information for a tag (which would be nonsensical) to trees
and blobs. But it should not have cut off the "name" field,
which should carry forward to children.
Note that this does mean that the "name" field will carry
forward to blobs and trees, too. Whereas prior to 2073949,
we always gave them an empty string. This is the right thing
to do, but in practice no callers probably use it (since now
we have an explicit separate "path" field, which was the
point of 2073949).
We add tests here not only for the broken case, but also a
basic sanity test of "log --source" in general, which did
not have any coverage in the test suite.
Reported-by: Raymundo <gypark@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mark_tree_uninteresting() has code to handle the case where it gets
passed a NULL pointer in its 'tree' parameter, but the function had
'object = &tree->object' assignment before checking if tree is
NULL. This gives a compiler an excuse to declare that tree will
never be NULL and apply a wrong optimization. Avoid it.
* sn/null-pointer-arith-in-mark-tree-uninteresting:
revision.c: fix possible null pointer arithmetic
mark_tree_uninteresting() has code to handle the case where it gets
passed a NULL pointer in its 'tree' parameter, but the function had
'object = &tree->object' assignment before checking if tree is
NULL. This gives a compiler an excuse to declare that tree will
never be NULL and apply a wrong optimization. Avoid it.
* sn/null-pointer-arith-in-mark-tree-uninteresting:
revision.c: fix possible null pointer arithmetic
mark_tree_uninteresting() dereferences a tree pointer before
checking if the pointer is valid. Fix that by doing the check first.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Instead of open-coding the function pop_commit() just call it. This
makes the intent clearer and reduces code size.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we already know the length of a string (e.g., because
we just malloc'd to fit it), it's nicer to use memcpy than
strcpy, as it makes it more obvious that we are not going to
overflow the buffer (because the size we pass matches the
size in the allocation).
This also eliminates calls to strcpy, which make auditing
the code base harder.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
If you init or clone an empty repository, the initial
message from running "git log" is not very friendly:
$ git init
Initialized empty Git repository in /home/peff/foo/.git/
$ git log
fatal: bad default revision 'HEAD'
Let's detect this situation and write a more friendly
message:
$ git log
fatal: your current branch 'master' does not have any commits yet
We also detect the case that 'HEAD' points to a broken ref;
this should be even less common, but is easy to see. Note
that we do not diagnose all possible cases. We rely on
resolve_ref, which means we do not get information about
complex cases. E.g., "--default master" would use dwim_ref
to find "refs/heads/master", but we notice only that
"master" does not exist. Similarly, a complex sha1
expression like "--default HEAD^2" will not resolve as a
ref.
But that's OK. We fall back to a generic error message in
those cases, and they are unlikely to be used anyway.
Catching an empty or broken "HEAD" improves the common case,
and the other cases are not regressed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code and documentation clean-up to "git bisect".
* ad/bisect-cleanup:
bisect: don't mix option parsing and non-trivial code
bisect: simplify the addition of new bisect terms
bisect: replace hardcoded "bad|good" by variables
Documentation/bisect: revise overall content
Documentation/bisect: move getting help section to the end
bisect: correction of typo
We create a file BISECT_TERMS in the repository .git to be read during a
bisection. There's no user-interface yet, but "git bisect" works if terms
other than old/new or bad/good are set in .git/BISECT_TERMS. The
fonctions to be changed if we add new terms are quite few.
In git-bisect.sh:
check_and_set_terms
bisect_voc
Co-authored-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Tweaked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is called only from one place, which makes sure to have
`interesting_cache` not NULL. Additionally the variable is a
dereferenced a few lines before unconditionally, which would have
resulted in a segmentation fault before hitting this check.
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
When we are traversing commit parents along the
UNINTERESTING side of a revision walk, we do not care if
the parent turns out to be missing. That lets us limit
traversals using unreachable and possibly incomplete
sections of history. However, we do still print error
messages about the missing commits; this patch suppresses
the error, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set revs->ignore_missing_links to instruct the
revision-walking machinery that we know the history graph
may be incomplete. For example, we use it when walking
unreachable but recent objects; we want to add what we can,
but it's OK if the history is incomplete.
However, we still print error messages for the missing
objects, which can be confusing. This is not an error, but
just a normal situation when transitioning from a repository
last pruned by an older git (which can leave broken segments
of history) to a more recent one (where we try to preserve
whole reachable segments).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --objects $old --not --all" to see if everything that
is reachable from $old is already connected to the existing refs
was very inefficient.
* jk/still-interesting:
limit_list: avoid quadratic behavior from still_interesting
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --objects $old --not --all" to see if everything that
is reachable from $old is already connected to the existing refs
was very inefficient.
* jk/still-interesting:
limit_list: avoid quadratic behavior from still_interesting
When we are limiting a rev-list traversal due to
UNINTERESTING refs, we have to walk down the tips (both
interesting and uninteresting) to find where they intersect.
We keep a queue of commits to examine, pop commits off
the queue one by one, and potentially add their parents. The
size of the queue will naturally fluctuate based on the
"width" of the history graph; i.e., the number of
simultaneous lines of development. But for the most part it
will stay in the same ballpark as the initial number of tips
we fed, shrinking over time (as we hit common ancestors of
the tips). So roughly speaking, if we start with `N` tips,
we'll spend much of the time with a queue around `N` items.
For each UNINTERESTING commit we pop, we call
still_interesting to check whether marking its parents as
UNINTERESTING has made the whole queue uninteresting (in
which case we can quit early). Because the queue is stored
as a linked list, this is `O(N)`, where `N` is the number of
items in the queue. So processing a queue with `N` commits
marked UNINTERESTING (and one or more interesting commits)
will take `O(N^2)`.
If you feed a lot of positive tips, this isn't a problem.
They aren't UNINTERESTING, so they don't incur the
still_interesting check. It also isn't a problem if you
traverse from an interesting tip to some UNINTERESTING
bases. We order the queue by recency, so the interesting
commits stay at the front of the queue as we walk down them.
The linear check can exit early as soon as it sees one
interesting commit left in the queue.
But if you want to know whether an older commit is reachable
from a set of newer tips, we end up processing in the
opposite direction: from the UNINTERESTING ones down to the
interesting one. This may happen when we call:
git rev-list $commits --not --all
in check_everything_connected after a fetch. If we fetched
something much older than most of our refs, and if we have a
large number of refs, the traversal cost is dominated by the
quadratic behavior.
These commands simulate the connectivity check of such a
fetch, when you have `$n` distinct refs in the receiver:
# positive ref is 100,000 commits deep
git rev-list --all | head -100000 | tail -1 >input
# huge number of more recent negative refs
git rev-list --all | head -$n | sed s/^/^/ >>input
time git rev-list --stdin <input
Here are timings for various `n` on the linux.git
repository. The `n=1` case provides a baseline for just
walking the commits, which lets us see the still_interesting
overhead. The times marked with `+` subtract that baseline
to show just the extra time growth due to the large number
of refs. The `x` numbers show the slowdown of the adjusted
time versus the prior trial.
n | before | after
--------------------------------------------------------
1 | 0.991s | 0.848s
10000 | 1.120s (+0.129s) | 0.885s (+0.037s)
20000 | 1.451s (+0.460s, 3.5x) | 0.923s (+0.075s, 2.0x)
40000 | 2.731s (+1.740s, 3.8x) | 0.994s (+0.146s, 1.9x)
80000 | 8.235s (+7.244s, 4.2x) | 1.123s (+0.275s, 1.9x)
Each trial doubles `n`, so you can see the quadratic (`4x`)
behavior before this patch. Afterwards, we have a roughly
linear relationship.
The implementation is fairly straightforward. Whenever we do
the linear search, we cache the interesting commit we find,
and next time check it before doing another linear search.
If that commit is removed from the list or becomes
UNINTERESTING itself, then we fall back to the linear
search. This is very similar to the trick used by fce87ae
(Fix quadratic performance in rewrite_one., 2008-07-12).
I considered and rejected several possible alternatives:
1. Keep a count of UNINTERESTING commits in the queue.
This requires managing the count not only when removing
an item from the queue, but also when marking an item
as UNINTERESTING. That requires touching the other
functions which mark commits, and would require knowing
quickly which commits are in the queue (lookup in the
queue is linear, so we would need an auxiliary
structure or to also maintain an IN_QUEUE flag in each
commit object).
2. Keep a separate list of interesting commits. Drop items
from it when they are dropped from the queue, or if
they become UNINTERESTING. This again suffers from
extra complexity to maintain the list, not to mention
CPU and memory.
3. Use a better data structure for the queue. This is
something that could help the fix in fce87ae, because
we order the queue by recency, and it is about
inserting quickly in recency order. So a normal
priority queue would help there. But here, we cannot
disturb the order of the queue, which makes things
harder. We really do need an auxiliary index to track
the flag we care about, which is basically option (2)
above.
The "cache" trick is simple, and the numbers above show that
it works well in practice. This is because the length of
time it takes to find an interesting commit is proportional
to the length of time it will remain cached (i.e., if we
have to walk a long way to find it, it also means we have to
pop a lot of elements in the queue until we get rid of it
and have to find another interesting commit).
The worst case is still quadratic, though. We could have `N`
uninteresting commits at the front of the queue, followed by
`N` interesting commits, where commit `i` has parent `i+N`.
When we pop commit `i`, we will notice that the parent of
the next commit, `i+1+N` is still interesting and cache it.
But then handling commit `i+1`, we will mark its parent
`i+1+N` uninteresting, and immediately invalidate our cache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --graph --no-walk A B..." is a otcnflicting request that
asks nonsense; no-walk tells us show discrete points in the
history, while graph asks to draw connections between these
discrete points. Forbid the combination.
* dj/log-graph-with-no-walk:
revision: forbid combining --graph and --no-walk
"git rev-list --bisect --first-parent" does not work (yet) and can
even cause SEGV; forbid it. "git log --bisect --first-parent"
would not be useful until "git bisect --first-parent" materializes,
so it is also forbidden for now.
* kd/rev-list-bisect-first-parent:
rev-list: refuse --first-parent combined with --bisect
rev-list --bisect is used by git bisect, but never together with
--first-parent. Because rev-list --bisect together with --first-parent
is not handled currently, and even leads to segfaults, refuse to use
both options together.
Because this is not supported, it makes little sense to use git log
--bisect --first parent either, because refs/heads/bad is not limited to
the first parent chain.
Helped-by: Junio C. Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because "--graph" is about connected history while --no-walk is
about discrete points, it does not make sense to allow these two
options at the same time. [1]
This change makes a few calls to "show --graph" fail in t4052, but
asking to show one commit with graph is a nonsensical thing to do.
Thus, tests on "show --graph" in t4052 have been removed [2,3].
Same tests on "show" without --graph option have already been tested
in 4052.
3 testcases have been added to test this patch.
[1]: http://article.gmane.org/gmane.comp.version-control.git/216083
[2]: http://article.gmane.org/gmane.comp.version-control.git/264950
[3]: http://article.gmane.org/gmane.comp.version-control.git/265107
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Helped-By: René Scharfe <l.s.r@web.de>
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark file-local symbols as "static", and drop functions that nobody
uses.
* jc/unused-symbols:
shallow.c: make check_shallow_file_for_update() static
remote.c: make clear_cas_option() static
urlmatch.c: make match_urls() static
revision.c: make save_parents() and free_saved_parents() static
line-log.c: make line_log_data_init() static
pack-bitmap.c: make pack_bitmap_filename() static
prompt.c: remove git_getpass() nobody uses
http.c: make finish_active_slot() and handle_curl_result() static
"git log --invert-grep --grep=WIP" will show only commits that do
not have the string "WIP" in their messages.
* cj/log-invert-grep:
log: teach --invert-grep option
"git log --grep=<string>" shows only commits with messages that
match the given string, but sometimes it is useful to be able to
show only commits that do *not* have certain messages (e.g. "show
me ones that are not FIXUP commits").
Originally, we had the invert-grep flag in grep_opt, but because
"git grep --invert-grep" does not make sense except in conjunction
with "--files-with-matches", which is already covered by
"--files-without-matches", it was moved it to revisions structure.
To have the flag there expresses the function to the feature better.
When the newly inserted two tests run, the history would have commits
with messages "initial", "second", "third", "fourth", "fifth", "sixth"
and "Second", committed in this order. The commits that does not match
either "th" or "Sec" is "second" and "initial". For the case insensitive
case only "initial" matches.
Signed-off-by: Christoph Junghans <ottxor@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we made "rev-list --object-edge" more aggressively list the
objects at the edge commits, in order to reduce number of objects
fetched into a shallow repository, but the change affected cases
other than "fetching into a shallow repository" and made it
unusably slow (e.g. fetching into a normal repository should not
have to suffer the overhead from extra processing). Limit it to a
more specific case by introducing --objects-edge-aggressive, a new
option to rev-list.
* bc/fetch-thin-less-aggressive-in-normal-repository:
pack-objects: use --objects-edge-aggressive for shallow repos
rev-list: add an option to mark fewer edges as uninteresting
Documentation: add missing article in rev-list-options.txt
The get_merge_bases*() API was easy to misuse by careless
copy&paste coders, leaving object flags tainted in the commits that
needed to be traversed.
* jc/merge-bases:
get_merge_bases(): always clean-up object flags
bisect: clean flags after checking merge bases
In commit fbd4a70 (list-objects: mark more commits as edges in
mark_edges_uninteresting - 2013-08-16), we marked an increasing number
of edges uninteresting. This change, and the subsequent change to make
this conditional on --objects-edge, are used by --thin to make much
smaller packs for shallow clones.
Unfortunately, they cause a significant performance regression when
pushing non-shallow clones with lots of refs (23.322 seconds vs.
4.785 seconds with 22400 refs). Add an option to git rev-list,
--objects-edge-aggressive, that preserves this more aggressive behavior,
while leaving --objects-edge to provide more performant behavior.
Preserve the current behavior for the moment by using the aggressive
option.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callers of get_merge_bases() can choose to leave object flags
used during the merge-base traversal by passing cleanup=0 as a
parameter, but in practice a very few callers can afford to do so
(namely, "git merge-base"), as they need to compute merge base in
preparation for other processing of their own and they need to see
the object without contaminate flags.
Change the function signature of get_merge_bases_many() and
get_merge_bases() to drop the cleanup parameter, so that the
majority of the callers do not have to say ", 1" at the end.
Give a new get_merge_bases_many_dirty() API to support only a few
callers that know they do not need to spend cycles cleaning up the
object flags.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no easy way to ask the revision traversal
machinery to include objects reachable from the index (e.g.,
blobs and trees that have not yet been committed). This
patch adds an option to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call traverse_commit_list, we may have trees and
blobs in the pending array. As we process these, we pass the
"name" field from the pending entry as the path of the
object within the tree (which then becomes the root path if
we recurse into subtrees).
When we set up the traversal in prepare_revision_walk,
though, the "name" field of any pending trees and blobs is
likely to be the ref at which we found the object. We would
not want to make this part of the path (e.g., doing so would
make "git rev-list --objects v2.6.11-tree" in linux.git show
paths like "v2.6.11-tree/Makefile", which is nonsensical).
Therefore prepare_revision_walk sets the name field of each
pending tree and blobs to the empty string.
However, this leaves no room for a caller who does know the
correct path of a pending object to propagate that
information to the revision walker. We can fix this by
making two related changes:
1. Use the "path" field as the path instead of the "name"
field in traverse_commit_list. If the path is not set,
default to "" (which is what we always ended up with in
the current code, because of prepare_revision_walk).
2. In prepare_revision_walk, make a complete copy of the
entry. This makes the path field available to the
walker (if there is one), solving our problem.
Leaving the name field intact is now OK, as we do not
use it as a path due to point (1) above (and we can use
it to make more meaningful error messages if we want).
We also make the original "mode" field available to the
walker, though it does not actually use it.
Note that we still re-add the pending objects and free the
old ones (so we may strdup the path and name only to free
the old ones). This could be made more efficient by simply
copying the object_array entries that we are keeping.
However, that would require more restructuring of the code,
and is not done here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to add all reflog entries as tips for finding
reachable objects. The revision machinery can already do
this (to support "rev-list --reflog"); we can reuse that
code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we enter prepare_revision_walk, we have zero or more
entries in our "pending" array. We disconnect that array
from the rev_info, and then process each entry:
1. If the entry is a commit and the --source option is in
effect, we keep a pointer to the object name.
2. Otherwise, we re-add the item to the pending list with
a blank name.
We then throw away the old array by freeing the array
itself, but do not touch the "name" field of each entry. For
any items of type (2), we leak the memory associated with
the name. This commit fixes that by calling object_array_clear,
which handles the cleanup for us.
That breaks (1), though, because it depends on the memory
pointed to by the name to last forever. We can solve that by
making a copy of the name. This is slightly less efficient,
but it shouldn't matter in practice, as we do it only for
the tip commits of the traversal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API to allocate the structure to keep track of commit
decoration was cumbersome to use, inviting lazy code to
overallocate memory.
* jk/name-decoration-alloc:
log-tree: use FLEX_ARRAY in name_decoration
log-tree: make name_decoration hash static
log-tree: make add_name_decoration a public function
In the previous commit, we made add_name_decoration global
so that adders would not have to access the hash directly.
We now make the hash itself static so that callers _have_ to
add through our function, making sure that all additions go
through a single point. To do this, we have to add one more
accessor function: a way to lookup entries in the hash.
Since the only caller doesn't actually look at the returned
value, but rather only asks whether there is a decoration or
not, we could provide only a boolean "has_name_decoration".
That would allow us to make "struct name_decoration" local
to log-tree, as well.
However, it's unlikely to cause any maintainability harm
making the actual data public, and this interface is more
flexible if we need to look at decorations from other parts
of the code in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, we parsed pretty options by looking for
"--pretty" at the start of the string, and then feeding the
rest (including an "=") to get_commit_format. Later, commit
48ded91 (log --pretty: do not accept bogus "--prettyshort",
2008-05-25) split this into a separate check for "--pretty"
versus "--pretty=".
However, when parsing "--pretty", we still passed "arg+8" to
get_commit_format. This is useless, since it will always
point to the NUL terminator at the end of the string. We can
simply pass NULL instead; both parameters are treated the
same by get_commit_format.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of code paths had to read the commit object more than
once when showing header fields that are usually not parsed. The
internal data structure to keep track of the contents of the commit
object has been updated to reduce the need for this double-reading,
and to allow the caller find the length of the object.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
Move "commit->buffer" out of the in-core commit object and keep
track of their lengths. Use this to optimize the code paths to
validate GPG signatures in commit objects.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
"git log --exclude=<glob> --all | git shortlog" worked as expected,
but "git shortlog --exclude=<glob> --all", which is supposed to be
identical to the above pipeline, was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
Like the callsites in the previous commit, logmsg_reencode
already falls back to read_sha1_file when necessary.
However, I split its conversion out into its own commit
because it's a bit more complex.
We return either:
1. The original commit->buffer
2. A newly allocated buffer from read_sha1_file
3. A reencoded buffer (based on either 1 or 2 above).
while trying to do as few extra reads/allocations as
possible. Callers currently free the result with
logmsg_free, but we can simplify this by pointing them
straight to unuse_commit_buffer. This is a slight layering
violation, in that we may be passing a buffer from (3).
However, since the end result is to free() anything except
(1), which is unlikely to change, and because this makes the
interface much simpler, it's a reasonable bending of the
rules.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from logmsg_reencode may be either a newly
allocated buffer or a pointer to the existing commit->buffer.
We would not want the caller to accidentally free() or
modify the latter, so let's mark it as const. We can cast
away the constness in logmsg_free, but only once we have
determined that it is a free-able buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mistyped command line simply ignores "master" and ends up
showing two commits from the current HEAD:
$ git log -2master
because we feed "2master" to atoi() without making sure that the
whole string is parsed as an integer.
Use the strtol_i() helper function instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log --exclude=<glob> --all | shortlog" worked as expected, but
"shortlog --exclude=<glob> --all" was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
These two commands are supposed to be equivalent:
$ git log --exclude=refs/notes/\* --all --no-merges --since=2.days |
git shortlog
$ git shortlog --exclude=refs/notes/\* --all --no-merges --since=2.days
However, the latter does not understand the ref-exclusion command
line option, even though other options understood by "log", such as
"--all" and "--no-merges", are understood.
This was because e7b432c5 (revision: introduce --exclude=<glob> to
tame wildcards, 2013-08-30) did not wire the new option fully to the
machinery. A new option understood by handle_revision_pseudo_opt()
must be told to handle_revision_opt() as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pack-objects is computing the reachability bitmap to
serve a fetch request, it can erroneously die() if some of
the UNINTERESTING objects are not present. Upload-pack
throws away HAVE lines from the client for objects we do not
have, but we may have a tip object without all of its
ancestors (e.g., if the tip is no longer reachable and was
new enough to survive a `git prune`, but some of its
reachable objects did get pruned).
In the non-bitmap case, we do a revision walk with the HAVE
objects marked as UNINTERESTING. The revision walker
explicitly ignores errors in accessing UNINTERESTING commits
to handle this case (and we do not bother looking at
UNINTERESTING trees or blobs at all).
When we have bitmaps, however, the process is quite
different. The bitmap index for a pack-objects run is
calculated in two separate steps:
First, we perform an extensive walk from all the HAVEs to
find the full set of objects reachable from them. This walk
is usually optimized away because we are expected to hit an
object with a bitmap during the traversal, which allows us
to terminate early.
Secondly, we perform an extensive walk from all the WANTs,
which usually also terminates early because we hit a commit
with an existing bitmap.
Once we have the resulting bitmaps from the two walks, we
AND-NOT them together to obtain the resulting set of objects
we need to pack.
When we are walking the HAVE objects, the revision walker
does not know that we are walking it only to mark the
results as uninteresting. We strip out the UNINTERESTING flag,
because those objects _are_ interesting to us during the
first walk. We want to keep going to get a complete set of
reachable objects if we can.
We need some way to tell the revision walker that it's OK to
silently truncate the HAVE walk, just like it does for the
UNINTERESTING case. This patch introduces a new
`ignore_missing_links` flag to the `rev_info` struct, which
we set only for the HAVE walk.
It also adds tests to cover UNINTERESTING objects missing
from several positions: a missing blob, a missing tree, and
a missing parent commit. The missing blob already worked (as
we do not care about its contents at all), but the other two
cases caused us to die().
Note that there are a few cases we do not need to test:
1. We do not need to test a missing tree, with the blob
still present. Without the tree that refers to it, we
would not know that the blob is relevant to our walk.
2. We do not need to test a tip commit that is missing.
Upload-pack omits these for us (and in fact, we
complain even in the non-bitmap case if it fails to do
so).
Reported-by: Siddharth Agarwal <sid0@fb.com>
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempts to show where a single-strand-of-pearls break in "git log"
output.
* nd/log-show-linear-break:
log: add --show-linear-break to help see non-linear history
object.h: centralize object flag allocation
Option explanation is in rev-list-options.txt. The interaction with -z
is left undecided.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/warn-on-object-refname-ambiguity:
rev-list: disable object/refname ambiguity check with --stdin
cat-file: restore warn_on_object_refname_ambiguity flag
cat-file: fix a minor memory leak in batch_objects
cat-file: refactor error handling of batch_objects
We started using wildmatch() in place of fnmatch(3); complete the
process and stop using fnmatch(3).
* nd/no-more-fnmatch:
actually remove compat fnmatch source code
stop using fnmatch (either native or compat)
Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch"
use wildmatch() directly without fnmatch() wrapper
This is the "rev-list" analogue to 25fba78 (cat-file:
disable object/refname ambiguity check for batch mode,
2013-07-12). Like cat-file, "rev-list --stdin" may read a
large number of sha1 object names, and the warning check
introduces a significant slow-down.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
* ks/tree-diff-walk:
tree-walk: finally switch over tree descriptors to contain a pre-parsed entry
revision: convert to using diff_tree_sha1()
line-log: convert to using diff_tree_sha1()
tree-diff: convert diff_root_tree_sha1() to just call diff_tree_sha1 with old=NULL
tree-diff: allow diff_tree_sha1 to accept NULL sha1
This helps reduce the number of match_pathspec_depth() call sites and
show how match_pathspec_depth() is used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that we don't use fnmatch() anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --left-right A...B" lost the "leftness" of commits
reachable from A when A is a tag as a side effect of a recent
bugfix. This is a regression in 1.8.4.x series.
* jc/revision-range-unpeel:
revision: propagate flag bits from tags to pointees
revision: mark contents of an uninteresting tree uninteresting
Since diff_tree_sha1() can now accept empty trees via NULL sha1, we
could just call it without manually reading trees into tree_desc and
duplicating code.
Besides, that
if (!tree)
return 0;
looked suspect - we were saying an invalid tree != empty tree, but maybe it is
better to just say the tree is invalid here, which is what diff_tree_sha1()
does for such case.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --left-right A...B" lost the "leftness" of commits
reachable from A when A is a tag as a side effect of a recent
bugfix. This is a regression in 1.8.4.x series.
* jc/revision-range-unpeel:
revision: propagate flag bits from tags to pointees
revision: mark contents of an uninteresting tree uninteresting
With the previous fix 895c5ba3 (revision: do not peel tags used in
range notation, 2013-09-19), handle_revision_arg() that processes
command line arguments for the "git log" family of commands no
longer directly places the object pointed by the tag in the pending
object array when it sees a tag object. We used to place pointee
there after copying the flag bits like UNINTERESTING and
SYMMETRIC_LEFT.
This change meant that any flag that is relevant to later history
traversal must now be propagated to the pointed objects (most often
these are commits) while starting the traversal, which is partly
done by handle_commit() that is called from prepare_revision_walk().
We did propagate UNINTERESTING, but did not do so for others, most
notably SYMMETRIC_LEFT. This caused "git log --left-right v1.0..."
(where "v1.0" is a tag) to start losing the "leftness" from the
commit the tag points at.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --objects ^A^{tree} B^{tree}" ought to mean "I want a
list of objects inside B's tree, but please exclude the objects that
appear inside A's tree".
we see the top-level tree marked as uninteresting (i.e. ^A^{tree} in
the above example) and call mark_tree_uninteresting() on it; this
unfortunately prevents us from recursing into the tree and marking
the objects in the tree as uninteresting.
The reason why "git log ^A A" yields an empty set of commits,
i.e. we do not have a similar issue for commits, is because we call
mark_parents_uninteresting() after seeing an uninteresting commit.
The uninteresting-ness of the commit itself does not prevent its
parents from being marked as uninteresting.
Introduce mark_tree_contents_uninteresting() and structure the code
in handle_commit() in such a way that it makes it the responsibility
of the callchain leading to this function to mark commits, trees and
blobs as uninteresting, and also make it the responsibility of the
helpers called from this function to mark objects that are reachable
from them.
Note that this is a very old bug that probably dates back to the day
when "rev-list --objects" was introduced. The line to clear
tree->object.parsed at the end of mark_tree_contents_uninteresting()
can be removed when this fix is merged to the codebase after
6e454b9a (clear parsed flag when we free tree buffers, 2013-06-05).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often wished a way to tell "git log --branches" (and "git
log --remotes --not --branches") to exclude some local branches
from the expansion of "--branches" (similarly for "--tags", "--all"
and "--glob=<pattern>"). Now they have one.
* jc/ref-excludes:
rev-parse: introduce --exclude=<glob> to tame wildcards
rev-list --exclude: export add/clear-ref-exclusion and ref-excluded API
rev-list --exclude: tests
document --exclude option
revision: introduce --exclude=<glob> to tame wildcards
All callers to parse_pathspec() must choose between getting no
pathspec or one path that is limited to the current directory
when there is no paths given on the command line, but there were
two callers that violated this rule, triggering a BUG().
* nd/magic-pathspec:
Fix calling parse_pathspec with no paths nor PATHSPEC_PREFER_* flags
"git rev-list --objects ^v1.0^ v1.0" gave v1.0 tag itself in the
output, but "git rev-list --objects v1.0^..v1.0" did not.
* jc/revision-range-unpeel:
revision: do not peel tags used in range notation
Normally parse_pathspec() is used on command line arguments where it
can do fancy thing like parsing magic on each argument or adding magic
for all pathspecs based on --*-pathspecs options.
There's another use of parse_pathspec(), where pathspec is needed, but
the input is known to be pure paths. In this case we usually don't
want --*-pathspecs to interfere. And we definitely do not want to
parse magic in these paths, regardless of --literal-pathspecs.
Add new flag PATHSPEC_LITERAL_PATH for this purpose. When it's set,
--*-pathspecs are ignored, no magic is parsed. And if the caller
allows PATHSPEC_LITERAL (i.e. the next calls can take literal magic),
then PATHSPEC_LITERAL will be set.
This fixes cases where git chokes when GIT_*_PATHSPECS are set because
parse_pathspec() indicates it won't take any magic. But
GIT_*_PATHSPECS add them anyway. These are
export GIT_LITERAL_PATHSPECS=1
git blame -- something
git log --follow something
git log --merge
"git ls-files --with-tree=path" (aka parse_pathspec() in
overlay_tree_on_cache()) is safe because the input is empty, and
producing one pathspec due to PATHSPEC_PREFER_CWD does not take any
magic into account.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit enables users of `struct rev_info` to peform custom limiting
during a revision walk (i.e. `get_revision`).
If the field `include_check` has been set to a callback, this callback
will be issued once for each commit before it is added to the "pending"
list of the revwalk. If the include check returns 0, the commit will be
marked as added but won't be pushed to the pending list, effectively
limiting the walk.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parse_pathspec() is called with no paths, the behavior could be
either return no paths, or return one path that is cwd. Some commands
do the former, some the latter. parse_pathspec() itself does not make
either the default and requires the caller to specify either flag if
it may run into this situation.
I've grep'd through all parse_pathspec() call sites. Some pass
neither, but those are guaranteed never pass empty path to
parse_pathspec(). There are two call sites that may pass empty path
and are fixed with this patch.
[jc: added a test from Antoine's bug report]
Reported-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A range notation "A..B" means exactly the same thing as what "^A B"
means, i.e. the set of commits that are reachable from B but not
from A. But the internal representation after the revision parser
parsed these two notations are subtly different.
- "rev-list ^A B" leaves A and B in the revs->pending.objects[]
array, with the former marked as UNINTERESTING and the revision
traversal machinery propagates the mark to underlying commit
objects A^0 and B^0.
- "rev-list A..B" peels tags and leaves A^0 (marked as
UNINTERESTING) and B^0 in revs->pending.objects[] array before
the traversal machinery kicks in.
This difference usually does not matter, but starts to matter when
the --objects option is used. For example, we see this:
$ git rev-list --objects v1.8.4^1..v1.8.4 | grep $(git rev-parse v1.8.4)
$ git rev-list --objects v1.8.4 ^v1.8.4^1 | grep $(git rev-parse v1.8.4)
04f013dc38 v1.8.4
With the former invocation, the revision traversal machinery never
hears about the tag v1.8.4 (it only sees the result of peeling it,
i.e. the commit v1.8.4^0), and the tag itself does not appear in the
output. The latter does send the tag object itself to the output.
Make the range notation keep the unpeeled objects and feed them to
the traversal machinery to fix this inconsistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of typing four capital letters "HEAD", you can say "@" now,
e.g. "git log @".
* fc/at-head:
Add new @ shortcut for HEAD
sha1-name: pass len argument to interpret_branch_name()
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
This is useful to make sure we don't step outside the boundaries of what
we are interpreting at the moment. For example while interpreting
foobar@{u}~1, the job of interpret_branch_name() ends right before ~1,
but there's no way to figure that out inside the function, unless the
len argument is passed.
So let's do that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often find "git log --branches" etc. that includes _all_
branches is cumbersome to use when they want to grab most but except
some. The same applies to --tags, --all and --glob.
Teach the revision machinery to remember patterns, and then upon the
next such a globbing option, exclude those that match the pattern.
With this, I can view only my integration branches (e.g. maint,
master, etc.) without topic branches, which are named after two
letters from primary authors' names, slash and topic name.
git rev-list --no-walk --exclude=??/* --branches |
git name-rev --refs refs/heads/* --stdin
This one shows things reachable from local and remote branches that
have not been merged to the integration branches.
git log --remotes --branches --not --exclude=??/* --branches
It may be a bit rough around the edges, in that the pattern to give
the exclude option depends on what globbing option follows. In
these examples, the pattern "??/*" is used, not "refs/heads/??/*",
because the globbing option that follows the -"-exclude=<pattern>"
is "--branches". As each use of globbing option resets previously
set "--exclude", this may not be such a bad thing, though.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reflog walking logic (git log -g) replaces the true parent list
with the preceding commit in the reflog. This results in bogus commit
diffs when combined with options such as -p; the diff is against the
reflog predecessor, not the parent of the commit.
Save the true parents on the side, extending the functions from the
previous commit. The diff logic picks them up and uses them to show
the correct diffs.
We do have to be somewhat careful about repeated calling of
save_parents(), since the reflog may list a commit more than once. We
now store (commit_list*)-1 to distinguish the "not saved yet" and
"root commit" cases. This lets us preserve an empty parent list even
if save_parents() is repeatedly called.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using pathspec filtering in combination with diff-based log
output, parent simplification happens before the diff is computed.
The diff is therefore against the *simplified* parents.
This works okay, arguably by accident, in the normal case:
simplification reduces to one parent as long as the commit is TREESAME
to it. So the simplified parent of any given commit must have the
same tree contents on the filtered paths as its true (unfiltered)
parent.
However, --full-diff breaks this guarantee, and indeed gives pretty
spectacular results when comparing the output of
git log --graph --stat ...
git log --graph --full-diff --stat ...
(--graph internally kicks in parent simplification, much like
--parents).
To fix it, store a copy of the parent list before simplification (in a
slab) whenever --full-diff is in effect. Then use the stored parents
instead of the simplified ones in the commit display code paths. The
latter do not actually check for --full-diff to avoid duplicated code;
they just grab the original parents if save_parents() has not been
called for this revision walk.
For ordinary commits it should be obvious that this is the right thing
to do.
Merge commits are a bit subtle. Observe that with default
simplification, merge simplification is an all-or-nothing decision:
either the merge is TREESAME to one parent and disappears, or it is
different from all parents and the parent list remains intact.
Redundant parents are not pruned, so the existing code also shows them
as a merge.
So if we do show a merge commit, the parent list just consists of the
rewrite result on each parent. Running, e.g., --cc on this in
--full-diff mode is not very useful: if any commits were skipped, some
hunks will disagree with all sides of the merge (with one side,
because commits were skipped; with the others, because they didn't
have those changes in the first place). This triggers --cc showing
these hunks spuriously.
Therefore I believe that even for merge commits it is better to show
the diffs wrt. the original parents.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, move free_pathspec() to pathspec.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These call sites follow the pattern:
paths = get_pathspec(prefix, argv);
init_pathspec(&pathspec, paths);
which can be converted into a single parse_pathspec() call.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" learned the "--author-date-order" option, with which the
output is topologically sorted and commits in parallel histories
are shown intermixed together based on the author timestamp.
* jc/topo-author-date-sort:
t6003: add --author-date-order test
topology tests: teach a helper to set author dates as well
t6003: add --date-order test
topology tests: teach a helper to take abbreviated timestamps
t/lib-t6000: style fixes
log: --author-date-order
sort-in-topological-order: use prio-queue
prio-queue: priority queue of pointers to structs
toposort: rename "lifo" field
Define memory ownership and lifetime rules for what for-each-ref
feeds to its callbacks (in short, "you do not own it, so make a
copy if you want to keep it").
* mh/reflife: (25 commits)
refs: document the lifetime of the args passed to each_ref_fn
register_ref(): make a copy of the bad reference SHA-1
exclude_existing(): set existing_refs.strdup_strings
string_list_add_refs_by_glob(): add a comment about memory management
string_list_add_one_ref(): rename first parameter to "refname"
show_head_ref(): rename first parameter to "refname"
show_head_ref(): do not shadow name of argument
add_existing(): do not retain a reference to sha1
do_fetch(): clean up existing_refs before exiting
do_fetch(): reduce scope of peer_item
object_array_entry: fix memory handling of the name field
find_first_merges(): remove unnecessary code
find_first_merges(): initialize merges variable using initializer
fsck: don't put a void*-shaped peg in a char*-shaped hole
object_array_remove_duplicates(): rewrite to reduce copying
revision: use object_array_filter() in implementation of gc_boundary()
object_array: add function object_array_filter()
revision: split some overly-long lines
cmd_diff(): make it obvious which cases are exclusive of each other
cmd_diff(): rename local variable "list" -> "entry"
...
Major update to the revision traversal logic to improve culling of
irrelevant parents while traversing a mergy history.
* kb/full-history-compute-treesame-carefully-2:
revision.c: make default history consider bottom commits
revision.c: don't show all merges for --parents
revision.c: discount side branches when computing TREESAME
revision.c: add BOTTOM flag for commits
simplify-merges: drop merge from irrelevant side branch
simplify-merges: never remove all TREESAME parents
t6012: update test for tweaked full-history traversal
revision.c: Make --full-history consider more merges
Documentation: avoid "uninteresting"
rev-list-options.txt: correct TREESAME for P
t6111: add parents to tests
t6111: allow checking the parents as well
t6111: new TREESAME test set
t6019: test file dropped in -s ours merge
decorate.c: compact table when growing
Sometimes people would want to view the commits in parallel
histories in the order of author dates, not committer dates.
Teach "topo-order" sort machinery to do so, using a commit-info slab
to record the author dates of each commit, and prio-queue to sort
them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary invariant of sort_in_topological_order() is that a
parent commit is not emitted until all children of it are. When
traversing a forked history like this with "git log C E":
A----B----C
\
D----E
we ensure that A is emitted after all of B, C, D, and E are done, B
has to wait until C is done, and D has to wait until E is done.
In some applications, however, we would further want to control how
these child commits B, C, D and E on two parallel ancestry chains
are shown.
Most of the time, we would want to see C and B emitted together, and
then E and D, and finally A (i.e. the --topo-order output). The
"lifo" parameter of the sort_in_topological_order() function is used
to control this behaviour. We start the traversal by knowing two
commits, C and E. While keeping in mind that we also need to
inspect E later, we pick C first to inspect, and we notice and
record that B needs to be inspected. By structuring the "work to be
done" set as a LIFO stack, we ensure that B is inspected next,
before other in-flight commits we had known that we will need to
inspect, e.g. E.
When showing in --date-order, we would want to see commits ordered
by timestamps, i.e. show C, E, B and D in this order before showing
A, possibly mixing commits from two parallel histories together.
When "lifo" parameter is set to false, the function keeps the "work
to be done" set sorted in the date order to realize this semantics.
After inspecting C, we add B to the "work to be done" set, but the
next commit we inspect from the set is E which is newer than B.
The name "lifo", however, is too strongly tied to the way how the
function implements its behaviour, and does not describe what the
behaviour _means_.
Replace this field with an enum rev_sort_order, with two possible
values: REV_SORT_IN_GRAPH_ORDER and REV_SORT_BY_COMMIT_DATE, and
update the existing code. The mechanical replacement rule is:
"lifo == 0" is equivalent to "sort_order == REV_SORT_BY_COMMIT_DATE"
"lifo == 1" is equivalent to "sort_order == REV_SORT_IN_GRAPH_ORDER"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many code paths will free a tree object's buffer and set it
to NULL after finishing with it in order to keep memory
usage down during a traversal. However, out of 8 sites that
do this, only one actually unsets the "parsed" flag back.
Those sites that don't are setting a trap for later users of
the tree object; even after calling parse_tree, the buffer
will remain NULL, causing potential segfaults.
It is not known whether this is triggerable in the current
code. Most commands do not do an in-memory traversal
followed by actually using the objects again. However, it
does not hurt to be safe for future callers.
In most cases, we can abstract this out to a
"free_tree_buffer" helper. However, there are two
exceptions:
1. The fsck code relies on the parsed flag to know that we
were able to parse the object at one point. We can
switch this to using a flag in the "flags" field.
2. The index-pack code sets the buffer to NULL but does
not free it (it is freed by a caller). We should still
unset the parsed flag here, but we cannot use our
helper, as we do not want to free the buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/line-log:
git-log(1): remove --full-line-diff description
line-log: fix documentation formatting
log -L: improve comments in process_all_files()
log -L: store the path instead of a diff_filespec
log -L: test merge of parallel modify/rename
t4211: pass -M to 'git log -M -L...' test
log -L: fix overlapping input ranges
log -L: check range set invariants when we look it up
Speed up log -L... -M
log -L: :pattern:file syntax to find by funcname
Implement line-history search (git log -L)
Export rewrite_parents() for 'log -L'
Refactor parse_loc
Previously, the memory management of the object_array_entry::name
field was inconsistent and undocumented. object_array_entries are
ultimately created by a single function, add_object_array_with_mode(),
which has an argument "const char *name". This function used to
simply set the name field to reference the string pointed to by the
name parameter, and nobody on the object_array side ever freed the
memory. Thus, it assumed that the memory for the name field would be
managed by the caller, and that the lifetime of that string would be
at least as long as the lifetime of the object_array_entry. But
callers were inconsistent:
* Some passed pointers to constant strings or argv entries, which was
OK.
* Some passed pointers to newly-allocated memory, but didn't arrange
for the memory ever to be freed.
* Some passed the return value of sha1_to_hex(), which is a pointer to
a statically-allocated buffer that can be overwritten at any time.
* Some passed pointers to refnames that they received from a
for_each_ref()-type iteration, but the lifetimes of such refnames is
not guaranteed by the refs API.
Bring consistency to this mess by changing object_array to make its
own copy for the object_array_entry::name field and free this memory
when an object_array_entry is deleted from the array.
Many callers were passing the empty string as the name parameter, so
as a performance optimization, treat the empty string specially.
Instead of making a copy, store a pointer to a statically-allocated
empty string to object_array_entry::name. When deleting such an
entry, skip the free().
Change the callers that were already passing copies to
add_object_array_with_mode() to either skip the copy, or (if the
memory needed to be allocated anyway) freeing the memory itself.
A part of this commit effectively reverts
70d26c6e76 read_revisions_from_stdin: make copies for handle_revision_arg
because the copying introduced by that commit (which is still
necessary) is now done at a deeper level.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use object_array_filter(), which will soon be made smarter about
cleaning up discarded entries properly. Also add a function comment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of assuming that the memory pointed to by the name argument
will live forever, make a local copy of it before storing it in the
ref_cmdline_info.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the default history treated bottom commits the same as any
other UNINTERESTING commit, which could force it down side branches.
Consider the following history:
*A--*B---D--*F * marks !TREESAME parent paths
\ /*
`-C-'
When requesting "B..F", B is UNINTERESTING but TREESAME to D. C is
!UNINTERESTING.
So default following would go from D into the irrelevant side branch C
to A, rather than to B. Note also that if there had been an extra
!UNINTERESTING commit B1 between B and D, it wouldn't have gone down C.
Change the default following to test relevant_commit() instead of
!UNINTERESTING, so it can proceed straight from D to B, thus finishing
the traversal of that path.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using --parents or --children, get_commit_action() previously showed
all merges, even if TREESAME to both parents.
This was intended to tie together the topology of the rewritten parents,
but it was excessive - in fact we only need to show merges that have two
or more relevant parents. Merges at the boundary do not necessarily need
to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the BOTTOM flag to define relevance for pruning. Relevant commits
are those that are !UNINTERESTING or BOTTOM, and this allows us to
identify irrelevant side branches (UNINTERESTING && !BOTTOM).
If a merge has relevant parents, and it is TREESAME to them, then do not
let irrelevant parents cause the merge to be treated as !TREESAME.
When considering simplification, don't always include all merges -
merges with exactly one relevant parent can be simplified, if TREESAME
according to the above rule.
These two changes greatly increase simplification in limited, pruned
revision lists.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing edge-based operations on the revision graph, it can be
useful to be able to identify the INTERESTING graph's connection(s) to
the bottom commit(s) specified by the user.
Conceptually when the user specifies "A..B" (== B ^A), they are asking
for the history from A to B. The first connection from A onto the
INTERESTING graph is part of that history, and should be considered. If
we consider only INTERESTING nodes and their connections, then we're
really only considering the history from A's immediate descendants to B.
This patch does not change behaviour, but adds a new BOTTOM flag to
indicate the bottom commits specified by the user, ready to be used by
following patches.
We immediately use the BOTTOM flag to return collect_bottom_commits() to
its original approach of examining the pending commit list rather than
the command line. This will ensure alignment of the definition of
"bottom" with future patches.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement commit 4b7f53da on top of the new simplify-merges
infrastructure, tightening the condition to only consider root parents;
the original version incorrectly dropped parents that were TREESAME to
anything.
Original log message follows.
The merge simplification rule stated in 6546b59 (revision traversal:
show full history with merge simplification, 2008-07-31) still
treated merge commits too specially. Namely, in a history with this
shape:
---o---o---M
/
x---x---x
where three 'x' were on a history completely unrelated to the main
history 'o' and do not touch any of the paths we are following, we
still said that after simplifying all of the parents of M, 'x'
(which is the leftmost 'x' that rightmost 'x simplifies down to) and
'o' (which would be the last commit on the main history that touches
the paths we are following) are independent from each other, and
both need to be kept.
That is incorrect; when the side branch 'x' never touches the paths,
it should be removed to allow M to simplify down to the last commit
on the main history that touches the paths.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When simplifying an odd merge, such as one that used "-s ours", we may
find ourselves TREESAME to apparently redundant parents. Prevent
simplify_merges() from removing every TREESAME parent; if this would
happen reinstate the first TREESAME parent - the one that the default
log would have followed.
This avoids producing a totally disjoint history from the default log
when the default log is a better explanation of the end result, and aids
visualisation of odd merges.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
History simplification previously always treated merges as TREESAME
if they were TREESAME to any parent.
While this was consistent with the default behaviour, this could be
extremely unhelpful when searching detailed history, and could not be
overridden. For example, if a merge had ignored a change, as if by "-s
ours", then:
git log -m -p --full-history -Schange file
would successfully locate "change"'s addition but would not locate the
merge that resolved against it.
Futher, simplify_merges could drop the actual parent that a commit
was TREESAME to, leaving it as a normal commit marked TREESAME that
isn't actually TREESAME to its remaining parent.
Now redefine a commit's TREESAME flag to be true only if a commit is
TREESAME to _all_ of its parents. This doesn't affect either the default
simplify_history behaviour (because partially TREESAME merges are turned
into normal commits), or full-history with parent rewriting (because all
merges are output). But it does affect other modes. The clearest
difference is that --full-history will show more merges - sufficient to
ensure that -m -p --full-history log searches can really explain every
change to the file, including those changes' ultimate fate in merges.
Also modify simplify_merges to recalculate TREESAME after removing
a parent. This is achieved by storing per-parent TREESAME flags on the
initial scan, so the combined flag can be easily recomputed.
This fixes some t6111 failures, but creates a couple of new ones -
we are now showing some merges that don't need to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation assures users that "A...B" is defined as "A B --not
$(git merge-base --all A B)". This wasn't in fact quite true, because
the calculated merge bases were not sent to add_rev_cmdline().
The main effect of this was that although
git rev-list --ancestry-path A B --not $(git merge-base --all A B)
worked, the simpler form
git rev-list --ancestry-path A...B
failed with a "no bottom commits" error.
Other potential users of bottom commits could also be affected by this
problem, if they examine revs->cmdline_info; I came across the issue in
my proposed history traversal refinements series.
So ensure that the calculated merge bases are sent to add_rev_cmdline(),
flagged with new 'whence' enum value REV_CMD_MERGE_BASE.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty-printing body of the commit that is stored in non UTF-8
encoding did not work well. The early part of this series fixes
it. And then it adds %C(auto) specifier that turns the coloring on
when we are emitting to the terminal, and adds column-aligning
format directives.
* nd/pretty-formats:
pretty: support %>> that steal trailing spaces
pretty: support truncating in %>, %< and %><
pretty: support padding placeholders, %< %> and %><
pretty: add %C(auto) for auto-coloring
pretty: split color parsing into a separate function
pretty: two phase conversion for non utf-8 commits
utf8.c: add reencode_string_len() that can handle NULs in string
utf8.c: add utf8_strnwidth() with the ability to skip ansi sequences
utf8.c: move display_mode_esc_sequence_len() for use by other functions
pretty: share code between format_decoration and show_decorations
pretty-formats.txt: wrap long lines
pretty: get the correct encoding for --pretty:format=%e
pretty: save commit encoding from logmsg_reencode if the caller needs it
A fix to a long-standing issue in the command line parser for
revisions, which was triggered by mv/sequence-pick-error-diag topic.
* tr/copy-revisions-from-stdin:
read_revisions_from_stdin: make copies for handle_revision_arg
The commit encoding is parsed by logmsg_reencode, there's no need for
the caller to re-parse it again. The reencoded message now has the new
encoding, not the original one. The caller would need to read commit
object again before parsing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_revisions_from_stdin() has passed pointers to its read buffer
down to handle_revision_arg() since its inception way back in 42cabc3
(Teach rev-list an option to read revs from the standard input.,
2006-09-05). Even back then, this was a bug: through
add_pending_object, the argument was recorded in the object_array's
'name' field.
Fix it by making a copy whenever read_revisions_from_stdin() passes an
argument down the callchain. The other caller runs handle_revision_arg()
on argv[], where it would be redundant to make a copy.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Bracey reports that the change regresses a case shown in the
user manual.
Trading one fix with another breakage is not worth it. Just keep
the test to document the existing breakage, and revert the change
for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.8.1:
Start preparing for 1.8.1.6
git-tag(1): we tag HEAD by default
Fix revision walk for commits with the same dates
t2003: work around path mangling issue on Windows
pack-refs: add fully-peeled trait
pack-refs: write peeled entry for non-tags
use parse_object_or_die instead of die("bad object")
avoid segfaults on parse_object failure
entry: fix filter lookup
t2003: modernize style
name-hash.c: fix endless loop with core.ignorecase=true
Allow the revision "slop" code to look deeper while commits with
exactly the same timestamps come next to each other (which can
often happen after a large "am" and "rebase" session).
* kk/revwalk-slop-too-many-commit-within-a-second:
Fix revision walk for commits with the same dates
The --simplify-merges logic did not cull irrelevant parents from a
merge that is otherwise not interesting with respect to the paths
we are following.
This touches a fairly core part of the revision traversal
infrastructure; even though I think this change is correct, please
report immediately if you find any unintended side effect.
* jc/remove-treesame-parent-in-simplify-merges:
simplify-merges: drop merge from irrelevant side branch
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function rewrite_one is used to rewrite a single
parent of the current commit, and is used by rewrite_parents
to rewrite all the parents.
Decouple the dependence between them by making rewrite_one
a callback function that is passed to rewrite_parents. Then
export rewrite_parents for reuse by the line history browser.
We will use this function in line-log.c.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logic in still_interesting function allows to stop the commits
traversing if the oldest processed commit is not older then the
youngest commit on the list to process and the list contains only
commits marked as not interesting ones. It can be premature when dealing
with a set of coequal commits. For example git rev-list A^! --not B
provides wrong answer if all commits in the range A..B had the same
commit time and there are more then 7 of them.
To fix this problem the relevant part of the logic in still_interesting
is changed to: the walk can be stopped if the oldest processed commit is
younger then the youngest commit on the list to processed.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git log --grep=foo", we will run your regex on
the literal bytes of the commit message. This can provide
confusing results if the commit message is not in the same
encoding as your grep expression (or worse, you have commits
in multiple encodings, in which case your regex would need
to be written to match either encoding). On top of this, we
might also be grepping in the commit's notes, which are
already re-encoded, potentially leading to grepping in a
buffer with mixed encodings concatenated. This is insanity,
but most people never noticed, because their terminal and
their commit encodings all match.
Instead, let's massage the to-be-grepped commit into a
standardized encoding. There is not much point in adding a
flag for "this is the encoding I expect my grep pattern to
match"; the only sane choice is for it to use the log output
encoding. That is presumably what the user's terminal is
using, and it means that the patterns found by the grep will
match the output produced by git.
As a bonus, this fixes a potential segfault in commit_match
when commit->buffer is NULL, as we now build on logmsg_reencode,
which handles reading the commit buffer from disk if
necessary. The segfault can be triggered with:
git commit -m 'text1' --allow-empty
git commit -m 'text2' --allow-empty
git log --graph --no-walk --grep 'text2'
which arguably does not make any sense (--graph inherently
wants a connected history, and by --no-walk the command line
is telling us to show discrete points in history without
connectivity), and we probably should forbid the
combination, but that is a separate issue.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge simplification rule stated in 6546b59 (revision traversal:
show full history with merge simplification, 2008-07-31) still
treated merge commits too specially. Namely, in a history with this
shape:
---o---o---M
/
x---x---x
where three 'x' were on a history completely unrelated to the main
history 'o' and do not touch any of the paths we are following, we
still said that after simplifying all of the parents of M, 'x'
(which is the leftmost 'x' that rightmost 'x simplifies down to) and
'o' (which would be the last commit on the main history that touches
the paths we are following) are independent from each other, and
both need to be kept.
That is incorrect; when the side branch 'x' never touches the paths,
it should be removed to allow M to simplify down to the last commit
on the main history that touches the paths.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we taught the commit_match() mechanism to pay attention to the
new --use-mailmap option, we started to unconditionally copy the
commit object to a temporary buffer, just in case we need the author
and committer lines updated via the mailmap mechanism, and rewrite
author and committer using the mailmap.
It turns out that this has a rather unpleasant performance
implications. In the linux kernel repository, running
$ git log --author='Junio C Hamano' --pretty=short >/dev/null
under /usr/bin/time, with and without --use-mailmap (the .mailmap
file is 118 entries long, the particular author does not appear in
it), cost (with warm cache):
[without --use-mailmap]
5.42user 0.26system 0:05.70elapsed 99%CPU (0avgtext+0avgdata 2005936maxresident)k
0inputs+0outputs (0major+137669minor)pagefaults 0swaps
[with --use-mailmap]
6.47user 0.30system 0:06.78elapsed 99%CPU (0avgtext+0avgdata 2006288maxresident)k
0inputs+0outputs (0major+137692minor)pagefaults 0swaps
which incurs about 20% overhead. The command is doing extra work,
so the extra cost may be justified.
But it is inexcusable to pay the cost when we do not need
author/committer match. In the same repository,
$ git log --grep='fix menuconfig on debian lenny' --pretty=short >/dev/null
shows very similar numbers as the above:
[without --use-mailmap]
5.32user 0.30system 0:05.63elapsed 99%CPU (0avgtext+0avgdata 2005984maxresident)k
0inputs+0outputs (0major+137672minor)pagefaults 0swaps
[with --use-mailmap]
6.64user 0.24system 0:06.89elapsed 99%CPU (0avgtext+0avgdata 2006320maxresident)k
0inputs+0outputs (0major+137694minor)pagefaults 0swaps
The latter case is an unnecessary performance regression. We may
want to _show_ the result with mailmap applied, but we do not have
to copy and rewrite the author/committer of all commits we try to
match if we do not query for these fields.
Trivially optimize this performace regression by limiting the
rewrites for only when we are matching with author/committer fields.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently you can use mailmap to display log authors and committers
but you can't use the mailmap to find commits with mapped values.
This commit allows you to run:
git log --use-mailmap --author mapped_name_or_email
git log --use-mailmap --committer mapped_name_or_email
Of course it only works if the --use-mailmap option is used.
The new name and email are copied only when necessary.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit the notes attached to the commit in "format-patch --notes"
output after three-dashes.
* jc/prettier-pretty-note:
format-patch: add a blank line between notes and diffstat
Doc User-Manual: Patch cover letter, three dashes, and --notes
Doc format-patch: clarify --notes use case
Doc notes: Include the format-patch --notes option
Doc SubmittingPatches: Mention --notes option after "cover letter"
Documentation: decribe format-patch --notes
format-patch --notes: show notes after three-dashes
format-patch: append --signature after notes
pretty_print_commit(): do not append notes message
pretty: prepare notes message at a centralized place
format_note(): simplify API
pretty: remove reencode_commit_message()
We either stuff the notes message without modification for %N
userformat, or format it for human consumption. Using two bits
is an overkill that does not benefit anybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we added the "--perl-regexp" option (or "-P") to "git grep", we
should have done the same for the commands in the "git log" family,
but somehow we forgot to do so. This corrects it, but we will
reserve the short-and-sweet "-P" option for something else for now.
Also introduce the "--basic-regexp" option for completeness, so that
the "last one wins" principle can be used to defeat an earlier -E
option, e.g. "git log -E --basic-regexp --grep='<bre>'". Note that
it cannot have the short "-G" option as the option is to grep in the
patch text in the context of "log" family.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line option parser for "git log -F -E --grep='<ere>'"
did not flip the "fixed" bit, violating the general "last option
wins" principle among conflicting options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the hand-rolled initialization sequence,
use grep_init() to populate the necessary bits. This opens
the door to allow the calling commands to optionally read
grep.* configuration variables via git_config() if they
want to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-log-grep-all-match-1:
grep.c: make two symbols really file-scope static this time
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Notes are shown after commit body. From user perspective it looks
pretty much like commit body and they may assume --grep would search
in that part too.
Make it so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to --author/--committer which filters commits by author and
committer header fields. --grep-reflog adds a fake "reflog" header to
commit and a grep filter to search on that line.
All rules to --author/--committer apply except no timestamp stripping.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a long-standing bug in "git log --grep" when multiple "--grep"
are used together with "--all-match" and "--author" or "--committer".
* jc/maint-log-grep-all-match:
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
Our "grep" allows complex boolean expressions to be formed to match
each individual line with operators like --and, '(', ')' and --not.
Introduce the "--debug" option to show the parse tree to help people
who want to debug and enhance it.
Also "log" learns "--grep-debug" option to do the same. The command
line parser to the log family is a lot more limited than the general
"git grep" parser, but it has special handling for header matching
(e.g. "--author"), and a parse tree is valuable when working on it.
Note that "--all-match" is *not* any individual node in the parse
tree. It is an instruction to the evaluator to check all the nodes
in the top-level backbone have matched and reject a document as
non-matching otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
"git cherry-pick A C B" used to replay changes in A and then B and
then C if these three commits had committer timestamps in that
order, which is not what the user who said "A C B" naturally expects.
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
* maint-1.7.11:
Almost 1.7.11.6
gitweb: URL-decode $my_url/$my_uri when stripping PATH_INFO
rebase -i: use full onto sha1 in reflog
sh-setup: protect from exported IFS
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
setup: clarify error messages for file/revisions ambiguity
send-email: improve RFC2047 quote parsing
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
"git diff" had a confusion between taking data from a path in the
working tree and taking data from an object that happens to have
name 0{40} recorded in a tree.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
When 'git log' is passed the --no-walk option, no revision walk takes
place, naturally. Perhaps somewhat surprisingly, however, the provided
revisions still get sorted by commit date. So e.g 'git log --no-walk
HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result
(unless the two revisions share the commit date, in which case they
will retain the order given on the command line). As the commit that
introduced --no-walk (8e64006 (Teach revision machinery about
--no-walk, 2007-07-24)) points out, the sorting is intentional, to
allow things like
git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
to show all refs in order by commit date.
But there are also other cases where the sorting is not wanted, such
as
<command producing revisions in order> |
git log --oneline --no-walk --stdin
To accomodate both cases, leave the decision of whether or not to sort
up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting
to 'sorted' for backward-compatibility reasons.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
Either end of revision range operator can be omitted to default to HEAD,
as in "origin.." (what did I do since I forked) or "..origin" (what did
they do since I forked). But the current parser interprets ".." as an
empty range "HEAD..HEAD", and worse yet, because ".." does exist on the
filesystem, we get this annoying output:
$ cd Documentation/howto
$ git log .. ;# give me recent commits that touch Documentation/ area.
fatal: ambiguous argument '..': both revision and filename
Use '--' to separate filenames from revisions
Surely we could say "git log ../" or even "git log -- .." to disambiguate,
but we shouldn't have to.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff_setup_done() has historically returned an error code, but lost
the last nonzero return in 943d5b7 (allow diff.renamelimit to be set
regardless of -M/-C, 2006-08-09). The callers were in a pretty
confused state: some actually checked for the return code, and some
did not.
Let it return void, and patch all callers to take this into account.
This conveniently also gets rid of a handful of different(!) error
messages that could never be triggered anyway.
Note that the function can still die().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff code represents paths using the diff_filespec
struct. This struct has a sha1 to represent the sha1 of the
content at that path, as well as a sha1_valid member which
indicates whether its sha1 field is actually useful. If
sha1_valid is not true, then the filespec represents a
working tree file (e.g., for the no-index case, or for when
the index is not up-to-date).
The diff_filespec is only used internally, though. At the
interfaces to the diff subsystem, callers feed the sha1
directly, and we create a diff_filespec from it. It's at
that point that we look at the sha1 and decide whether it is
valid or not; callers may pass the null sha1 as a sentinel
value to indicate that it is not.
We should not typically see the null sha1 coming from any
other source (e.g., in the index itself, or from a tree).
However, a corrupt tree might have a null sha1, which would
cause "diff --patch" to accidentally diff the working tree
version of a file instead of treating it as a blob.
This patch extends the edges of the diff interface to accept
a "sha1_valid" flag whenever we accept a sha1, and to use
that flag when creating a filespec. In some cases, this
means passing the flag through several layers, making the
code change larger than would be desirable.
One alternative would be to simply die() upon seeing
corrupted trees with null sha1s. However, this fix more
directly addresses the problem (while bogus sha1s in a tree
are probably a bad thing, it is really the sentinel
confusion sending us down the wrong code path that is what
makes it devastating). And it means that git is more capable
of examining and debugging these corrupted trees. For
example, you can still "diff --raw" such a tree to find out
when the bogus entry was introduced; you just cannot do a
"--patch" diff (just as you could not with any other
corrupted tree, as we do not have any content to diff).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log -n 1 -- rarely-touched-path" was spending unnecessary
cycles after showing the first change to find the next one, only to
discard it.
* jk/revision-walk-stop-at-max-count:
revision: avoid work after --max-count is reached
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
During a revision traversal in which --max-count has been
specified, we decrement a counter for each revision returned
by get_revision. When it hits 0, we typically return NULL
(the exception being if we still have boundary commits to
show).
However, before we check the counter, we call get_revision_1
to get the next commit. This might involve looking at a
large number of commits if we have restricted the traversal
(e.g., we might traverse until we find the next commit whose
diff actually matches a pathspec).
There's no need to make this get_revision_1 call when our
counter runs out. If we are not in --boundary mode, we will
just throw away the result and immediately return NULL. If
we are in --boundary mode, then we will still throw away the
result, and then start showing the boundary commits.
However, as git_revision_1 does not impact the boundary
list, it should not have an impact.
In most cases, avoiding this work will not be especially
noticeable. However, in some cases, it can make a big
difference:
[before]
$ time git rev-list -1 origin Documentation/RelNotes/1.7.11.2.txt
8d141a1d56
real 0m0.301s
user 0m0.280s
sys 0m0.016s
[after]
$ time git rev-list -1 origin Documentation/RelNotes/1.7.11.2.txt
8d141a1d56
real 0m0.010s
user 0m0.008s
sys 0m0.000s
Note that the output is produced almost instantaneously in
the first case, and then git uselessly spends a long time
looking for the next commit to touch that file (but there
isn't one, and we traverse all the way down to the roots).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git log" gets "--simplify-merges/by-decoration" together with
"--first-parent", the combination of these options makes the
simplification logic to use in-core commit objects that haven't been
examined for relevance, either producing incorrect result or taking
too long to produce any output. Teach the simplification logic to
ignore commits that the first-parent traversal logic ignored when
both are in effect to work around the issue.
* jc/rev-list-simplify-merges-first-parent:
revision: ignore side parents while running simplify-merges
revision: note the lack of free() in simplify_merges()
revision: "simplify" options imply topo-order sort
"git diff COPYING HEAD:COPYING" gave a nonsense error message that
claimed that the treeish HEAD did not have COPYING in it.
* mm/verify-filename-fix:
verify_filename(): ask the caller to chose the kind of diagnosis
sha1_name: do not trigger detailed diagnosis for file arguments
Add a field to setup_revision_opt structure and allow these callers
to tell the setup_revisions command parsing machinery that short SHA1
it encounters are meant to name committish.
This step does not go all the way to connect the setup_revisions()
to sha1_name.c yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing "cant_be_filename" that tells the function that the
caller knows the arg is not a path (hence it does not have to be
checked for absense of the file whose name matches it) is made into
a bit in the flag word.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers know that the user meant to name a committish by
syntactical positions where the object name appears. Calling this
function allows the machinery to disambiguate shorter-than-unique
abbreviated object names between committish and others.
Note that this does NOT error out when the named object is not a
committish. It is merely to give a hint to the disambiguation
machinery.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes user input string and returns the object name
(binary SHA-1) with mode bits and path when the object was looked
up in a tree.
Additionally give hints to help disambiguation of abbreviated object
names when the caller knows what it is looking for.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are only two callers, and they will benefit from being able to
pass disambiguation hints to underlying get_sha1_with_context() API
once it happens.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--simplify-merges/by-decoration" is given together with
"--first-parent" to "git log", the combination of these options
makes the simplification logic to use in-core commit objects that
haven't been examined for relevance, either producing incorrect
result or taking too long to produce any output. Teach the
simplification logic to ignore commits that the first-parent
traversal logic ignored when both are in effect to work around the
issue.
