SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
Add a member for the hash algorithm currently in use to the packet
reader so it can parse references correctly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future commit, we will use PACKET_READ_RESPONSE_END to separate
messages proxied by remote-curl. To prepare for this, add the
PACKET_READ_RESPONSE_END enum value.
In switch statements that need a case added, die() or BUG() when a
PACKET_READ_RESPONSE_END is unexpected. Otherwise, mirror how
PACKET_READ_DELIM is implemented (especially in cases where packets are
being forwarded).
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future commit, we will be manually processing packets and we will
need to access the length header. In order to simplify this, extern
packet_length() so that the logic can be reused.
Change the function parameter from `const char *linelen` to
`const char lenbuf_hex[4]`. Even though these two types behave
identically as function parameters, use the array notation to
semantically indicate exactly what this function is expecting as an
argument. Also, rename it from linelen to lenbuf_hex as the former
sounds like it should be an integral type which is misleading.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This typo was introduced in 2153d478b7 (pkt-line: introduce
packet_read_with_status, 2018-03-14).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous patches, extern was mechanically removed from function
declarations without care to formatting, causing parameter lists to be
misaligned. Manually format changed sections such that the parameter
lists should be realigned.
Viewing this patch with 'git diff -w' should produce no output.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When transmitting and receiving POSTs for protocol v0 and v1,
remote-curl uses post_rpc() (and associated functions), but when doing
the same for protocol v2, it uses a separate set of functions
(proxy_rpc() and others). Besides duplication of code, this has caused
at least one bug: the auth retry mechanism that was implemented in v0/v1
was not implemented in v2.
To fix this issue and avoid it in the future, make remote-curl also use
post_rpc() when handling protocol v2. Because line lengths are written
to the HTTP request in protocol v2 (unlike in protocol v0/v1), this
necessitates changes in post_rpc() and some of the functions it uses;
perform these changes too.
A test has been included to ensure that the code for both the unchunked
and chunked variants of the HTTP request is exercised.
Note: stateless_connect() has been updated to use the lower-level packet
reading functions instead of struct packet_reader. The low-level control
is necessary here because we cannot change the destination buffer of
struct packet_reader while it is being used; struct packet_buffer has a
peeking mechanism which relies on the destination buffer being present
in between a peek and a read.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a response to a fetch request has sideband support only while
the packfile is being sent, meaning that the server cannot send notices
until the start of the packfile.
Extend sideband support in protocol v2 fetch responses to the whole
response. upload-pack will advertise it if the
uploadpack.allowsidebandall configuration variable is set, and
fetch-pack will automatically request it if advertised.
If the sideband is to be used throughout the whole response, upload-pack
will use it to send errors instead of prefixing a PKT-LINE payload with
"ERR ".
This will be tested in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch will teach struct packet_reader a new field that, if
set, instructs it to interpret read data as multiplexed. This will
create a dependency from pkt-line to sideband.
To avoid a circular dependency, split recv_sideband() into 2 parts: the
reading loop (left in recv_sideband()) and the processing of the
contents (in demultiplex_sideband()), and move the former into pkt-line.
This reverses the direction of dependency: sideband no longer depends on
pkt-line, and pkt-line now depends on sideband.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch will allow the client to request multiplexing of the
entire fetch response (and not only during packfile transmission), which
in turn allows the server to send progress and keepalive messages at any
time during the response.
It will be convenient for a future patch if writing options
(specifically, whether the written data is to be multiplexed) could be
controlled from a single place, so create struct packet_writer to serve
as that place, and modify upload-pack to use it.
Currently, it only stores the output fd, but a subsequent patch will (as
described above) introduce an option to determine if the written data is
to be multiplexed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the Git pack protocol definition, an error packet may appear only in
a certain context. However, servers can face a runtime error (e.g. I/O
error) at an arbitrary timing. This patch changes the protocol to allow
an error packet to be sent instead of any packet.
Without this protocol spec change, when a server cannot process a
request, there's no way to tell that to a client. Since the server
cannot produce a valid response, it would be forced to cut a connection
without telling why. With this protocol spec change, the server can be
more gentle in this situation. An old client may see these error packets
as an unexpected packet, but this is not worse than having an unexpected
EOF.
Following this protocol spec change, the error packet handling code is
moved to pkt-line.c. Implementation wise, this implementation uses
pkt-line to communicate with a subprocess. Since this is not a part of
Git protocol, it's possible that a packet that is not supposed to be an
error packet is mistakenly parsed as an error packet. This error packet
handling is enabled only for the Git pack protocol parsing code
considering this.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the 'packet_buf_write_len()' function which allows for writing an
arbitrary length buffer into a 'struct strbuf' and formatting it in
packet-line format.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the design goals of protocol-v2 is to improve the semantics of
flush packets. Currently in protocol-v1, flush packets are used both to
indicate a break in a list of packet lines as well as an indication that
one side has finished speaking. This makes it particularly difficult
to implement proxies as a proxy would need to completely understand git
protocol instead of simply looking for a flush packet.
To do this, introduce the special deliminator packet '0001'. A delim
packet can then be used as a deliminator between lists of packet lines
while flush packets can be reserved to indicate the end of a response.
Documentation for how this packet will be used in protocol v2 will
included in a future patch.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is advantageous to be able to peek the next packet line
without consuming it (e.g. to be able to determine the protocol version
a server is speaking). In order to do that introduce 'struct
packet_reader' which is an abstraction around the normal packet reading
logic. This enables a caller to be able to peek a single line at a time
using 'packet_reader_peek()' and having a caller consume a line by
calling 'packet_reader_read()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current pkt-line API encodes the status of a pkt-line read in the
length of the read content. An error is indicated with '-1', a flush
with '0' (which can be confusing since a return value of '0' can also
indicate an empty pkt-line), and a positive integer for the length of
the read content otherwise. This doesn't leave much room for allowing
the addition of additional special packets in the future.
To solve this introduce 'packet_read_with_status()' which reads a packet
and returns the status of the read encoded as an 'enum packet_status'
type. This allows for easily identifying between special and normal
packets as well as errors. It also enables easily adding a new special
packet in the future.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function which can be used to write the contents of an arbitrary
buffer. This makes it easy to build up data in a buffer before writing
the packet instead of formatting the entire contents of the packet using
'packet_write_fmt()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor, into a common function, the version and capability negotiation
done when invoking a long-running process as a clean or smudge filter.
This will be useful for other Git code that needs to interact similarly
with a long-running process.
As you can see in the change to t0021, this commit changes the error
message reported when the long-running process does not introduce itself
with the expected "server"-terminated line. Originally, the error
message reports that the filter "does not support filter protocol
version 2", differentiating between the old single-file filter protocol
and the new multi-file filter protocol - I have updated it to something
more generic and useful.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
packet_writel() takes a variable-sized list and reads to
the first NULL. Let's let the compiler know so that it can
help us catch mistakes in the callers.
This should have been annotated similarly when it was a
static function, but it's doubly important now that the
function is available to the whole code-base.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add packet_writel() which writes multiple lines in a single call and
then calls packet_flush_gently(). Update convert.c to use the new
packet_writel() function from pkt-line.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add packet_read_line_gently() to enable reading a line without dying on
EOF.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_packetized_from_fd() and write_packetized_from_buf() write a
stream of packets. All content packets use the maximal packet size
except for the last one. After the last content packet a `flush` control
packet is written.
read_packetized_to_strbuf() reads arbitrary sized packets until it
detects a `flush` packet.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
packet_flush() would die in case of a write error even though for some
callers an error would be acceptable. Add packet_flush_gently() which
writes a pkt-line flush packet like packet_flush() but does not die in
case of an error. The function is used in a subsequent patch.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
packet_write_fmt() would die in case of a write error even though for
some callers an error would be acceptable. Add packet_write_fmt_gently()
which writes a formatted pkt-line like packet_write_fmt() but does not
die in case of an error. The function is used in a subsequent patch.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
packet_write() should be called packet_write_fmt() because it is a
printf-like function that takes a format string as first parameter.
packet_write_fmt() should be used for text strings only. Arbitrary
binary data should use a new packet_write() function that is introduced
in a subsequent patch.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packet_read function reads from a descriptor. The
packet_get_line function is similar, but reads from an
in-memory buffer, and uses a completely separate
implementation. This patch teaches the generic packet_read
function to accept either source, and we can do away with
packet_get_line's implementation.
There are two other differences to account for between the
old and new functions. The first is that we used to read
into a strbuf, but now read into a fixed size buffer. The
only two callers are fine with that, and in fact it
simplifies their code, since they can use the same
static-buffer interface as the rest of the packet_read_line
callers (and we provide a similar convenience wrapper for
reading from a buffer rather than a descriptor).
This is technically an externally-visible behavior change in
that we used to accept arbitrary sized packets up to 65532
bytes, and now cap out at LARGE_PACKET_MAX, 65520. In
practice this doesn't matter, as we use it only for parsing
smart-http headers (of which there is exactly one defined,
and it is small and fixed-size). And any extension headers
would be breaking the protocol to go over LARGE_PACKET_MAX
anyway.
The other difference is that packet_get_line would return
on error rather than dying. However, both callers of
packet_get_line are actually improved by dying.
The first caller does its own error checking, but we can
drop that; as a result, we'll actually get more specific
reporting about protocol breakage when packet_read dies
internally. The only downside is that packet_read will not
print the smart-http URL that failed, but that's not a big
deal; anybody not debugging can already see the remote's URL
already, and anybody debugging would want to run with
GIT_CURL_VERBOSE anyway to see way more information.
The second caller, which is just trying to skip past any
extra smart-http headers (of which there are none defined,
but which we allow to keep room for future expansion), did
not error check at all. As a result, it would treat an error
just like a flush packet. The resulting mess would generally
cause an error later in get_remote_heads, but now we get
error reporting much closer to the source of the problem.
Brown-paper-bag-fixes-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers of packet_read_line just read into a
static 1000-byte buffer (callers which handle arbitrary
binary data already use LARGE_PACKET_MAX). This works fine
in practice, because:
1. The only variable-sized data in these lines is a ref
name, and refs tend to be a lot shorter than 1000
characters.
2. When sending ref lines, git-core always limits itself
to 1000 byte packets.
However, the only limit given in the protocol specification
in Documentation/technical/protocol-common.txt is
LARGE_PACKET_MAX; the 1000 byte limit is mentioned only in
pack-protocol.txt, and then only describing what we write,
not as a specific limit for readers.
This patch lets us bump the 1000-byte limit to
LARGE_PACKET_MAX. Even though git-core will never write a
packet where this makes a difference, there are two good
reasons to do this:
1. Other git implementations may have followed
protocol-common.txt and used a larger maximum size. We
don't bump into it in practice because it would involve
very long ref names.
2. We may want to increase the 1000-byte limit one day.
Since packets are transferred before any capabilities,
it's difficult to do this in a backwards-compatible
way. But if we bump the size of buffer the readers can
handle, eventually older versions of git will be
obsolete enough that we can justify bumping the
writers, as well. We don't have plans to do this
anytime soon, but there is no reason not to start the
clock ticking now.
Just bumping all of the reading bufs to LARGE_PACKET_MAX
would waste memory. Instead, since most readers just read
into a temporary buffer anyway, let's provide a single
static buffer that all callers can use. We can further wrap
this detail away by having the packet_read_line wrapper just
use the buffer transparently and return a pointer to the
static storage. That covers most of the cases, and the
remaining ones already read into their own LARGE_PACKET_MAX
buffers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having the packet sizes defined near the packet read/write
functions makes more sense.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packets sent during ref negotiation are all terminated
by newline; even though the code to chomp these newlines is
short, we end up doing it in a lot of places.
This patch teaches packet_read_line to auto-chomp the
trailing newline; this lets us get rid of a lot of inline
chomping code.
As a result, some call-sites which are not reading
line-oriented data (e.g., when reading chunks of packfiles
alongside sideband) transition away from packet_read_line to
the generic packet_read interface. This patch converts all
of the existing callsites.
Since the function signature of packet_read_line does not
change (but its behavior does), there is a possibility of
new callsites being introduced in later commits, silently
introducing an incompatibility. However, since a later
patch in this series will change the signature, such a
commit would have to be merged directly into this commit,
not to the tip of the series; we can therefore ignore the
issue.
This is an internal cleanup and should produce no change of
behavior in the normal case. However, there is one corner
case to note. Callers of packet_read_line have never been
able to tell the difference between a flush packet ("0000")
and an empty packet ("0004"), as both cause packet_read_line
to return a length of 0. Readers treat them identically,
even though Documentation/technical/protocol-common.txt says
we must not; it also says that implementations should not
send an empty pkt-line.
By stripping out the newline before the result gets to the
caller, we will now treat the newline-only packet ("0005\n")
the same as an empty packet, which in turn gets treated like
a flush packet. In practice this doesn't matter, as neither
empty nor newline-only packets are part of git's protocols
(at least not for the line-oriented bits, and readers who
are not expecting line-oriented packets will be calling
packet_read directly, anyway). But even if we do decide to
care about the distinction later, it is orthogonal to this
patch. The right place to tighten would be to stop treating
empty packets as flush packets, and this change does not
make doing so any harder.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally we had a single function for reading packetized
data: packet_read_line. Commit 46284dd grew a more "gentle"
form, packet_read, that returns an error instead of dying
upon reading a truncated input stream. However, it is not
clear from the names which should be called, or what the
difference is.
Let's instead make packet_read be a generic public interface
that can take option flags, and update the single callsite
that uses it. This is less code, more clear, and paves the
way for introducing more options into the generic interface
later. The function signature is changed, so there should be
no hidden conflicts with topics in flight.
While we're at it, we'll document how error conditions are
handled based on the options, and rename the confusing
"return_line_fail" option to "gentle_on_eof". While we are
cleaning up the names, we can drop the "return_line_fail"
checks in packet_read_internal entirely. They look like
this:
ret = safe_read(..., return_line_fail);
if (return_line_fail && ret < 0)
...
The check for return_line_fail is a no-op; safe_read will
only ever return an error value if return_line_fail was true
in the first place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just write_or_die by another name. The one
distinction is that write_or_die will treat EPIPE specially
by suppressing error messages. That's fine, as we die by
SIGPIPE anyway (and in the off chance that it is disabled,
write_or_die will simulate it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment describing the packet writing interface was
originally written above packet_write, but migrated to be
above safe_write in f3a3214, probably because it is meant to
generally describe the packet writing interface and not a
single function. Let's move it into the header file, where
users of the interface are more likely to see it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a server accessed through ssh is denying access git will currently
issue the message
"fatal: The remote end hung up unexpectedly"
as the last line. This sounds as if something really ugly just happened.
Since this is a quite typical situation in which users regularly get
we do not say that if it happens at the beginning when reading the
remote heads.
If its in the very first beginning of reading the remote heads it is
very likely an authentication error or a missing repository.
If it happens later during reading the remote heads we still indicate
that it happened during this initial contact phase.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These routines help to work with pkt-line values inside of a strbuf,
permitting simple formatting of buffered network messages.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pkt-line.h uses GCC's __attribute__ extension but does not include
git-compat-util.h. So it will not compile with a compiler that does
not support this extension.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This implements a protocol extension between fetch-pack and
upload-pack to allow stderr stream from upload-pack (primarily
used for the progress bar display) to be passed back.
Signed-off-by: Junio C Hamano <junkio@cox.net>
GCC's format __attribute__ is good for checking errors, especially
with -Wformat=2 parameter. This fixes most of the reported problems
against 2005-08-09 snapshot.
