This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add link to gitweb(1) in "SEE ALSO" section of git-instaweb(1) manpage,
and "Ancillary Commands" section of git(1) manpage (the latter by the
way of command-list.txt file).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently start/restart does not generate any configuration files for
spawning a new instance. This means that
$ git instaweb --http=<server> --start
might pick up stale 'httpd.conf' file for a different web server
(e.g. for default lighttpd when requesting apache2).
This commit changes that, and makes git-instaweb generate web server
config file and/or gitweb config file if don't exists.
This required naming config files after the name of web server
(alternate solution would be to somehow mark for which web server was
config file generated).
Note that web servers that embed configuration in server script file,
namely webrick and plackup, and which delete "$conf" in their *_conf
function, would have their config (server script) always regenerated.
Note: this commit introduces a bit of code repetition (but only a few
lines).
Reported-by: Gurjeet Singh <singh.gurjeet@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
Older versions of AsciiDoc used to literally pass double dashes when we
used them in our linkgit macros and manpage titles, but newer ones (the
issue was first reported with AsciiDoc 8.5.2) turn them into em dashes.
Define litdd (literal double-dash) custom attribute in asciidoc.conf to
work this around. While we are at it, fix a few double-dashes (e.g. the
description of "project--devo--version" convention used by tla, among
other things) that used to be incorrectly written as em dashes in the body
text to also use this attribute.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flags --start, --stop, and --restart can be used without the "--".
Document this feature.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
PSGI is an interface between Perl web applications and web servers, and
Plack is a Perl module and toolkit that contains PSGI middleware, helpers
and adapters to web servers; see http://plackperl.org
PSGI and Plack are inspired by Python's WSGI and Ruby's Rack (and
probably JavaScript's Jack/JSGI).
Plack core distribution includes HTTP::Server::PSGI, a reference PSGI
standalone web server implementation. 'plackup' is a command line
launcher to run PSGI applications from command line, connecting web
app to a web server via Plack::Runner module. By default it uses
HTTP::Server::PSGI as a web server.
git-instaweb generates gitweb.psgi wrapper (in $GIT_DIR/gitweb). This
wrapper uses Plack::App::WrapCGI to compile gitweb.cgi (which is a CGI
script) into a PSGI application using CGI::Compile and CGI::Emulate::PSGI.
git-instaweb then runs this wrapper, using by default HTTP::Server::PSGI
standalone Perl server, via Plack::Runner.
The configuration for 'plackup' is currently embedded in generated
gitweb.psgi wrapper, instead of using httpd.conf ($conf).
To run git-instaweb with '--httpd=plackup', you need to have instaled
Plack core, CGI::Emulate::PSGI, CGI::Compile. Those modules have to be
available for Perl scripts (which can be done for example by setting
PERL5LIB environment variable). This is currently not documented.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
Mongoose (http://code.google.com/p/mongoose/) is a lightweight web
server. It's just a single binary so it's a lot simpler to configure and
install.
Signed-off-by: Wilhansen Li <wil@nohakostudios.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-help.txt' and 'git-instaweb.txt' contained duplicated
information about 'git-web--browse'.
This patch puts this information where it belongs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that 'git-instaweb' uses 'git-web--browse', update the
documentation accordingly.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also explain that "git instaweb" may use "web.browser" config
variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
running the webrick server with git requires Ruby and Ruby's YAML and
Webrick libraries (both of which come standard with Ruby). nice for
single-user standalone invocations.
the --httpd=webrick option generates a ruby script on the fly to read
httpd.conf options and invoke the web server via library call. this
script is placed in the .git/gitweb directory. it also generates a
shell script in a feeble attempt to invoke ruby in a portable manner,
which assumes that 'ruby' is in the user's $PATH.
Signed-off-by: Mike Dalessio <mike@csa.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I got tired of having to configure gitweb for every repository
I work on. I sometimes prefer gitweb to standard GUIs like gitk
or gitview; so this lets me automatically configure gitweb to
browse my working repository and also opens my browser to it.
Updates from the original patch:
Added Apache/mod_perl2 compatibility if Dennis Stosberg's gitweb
has been applied, too: <20060621130708.Gcbc6e5c@leonov.stosberg.net>
General cleanups in shell code usage.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
