Disable `command_requires_full_index` repo setting and add
`ensure_full_index` guards around code paths that cannot yet use sparse
directory index entries. `reset --soft` does not modify the index, so no
compatibility changes are needed for it to function without expanding the
index. For all other reset modes (`--mixed`, `--hard`, `--keep`, `--merge`),
the full index is expanded to prevent cache tree corruption and invalid
variable accesses.
Additionally, the `read_cache()` check verifying an uncorrupted index is
moved after argument parsing and preparing the repo settings. The index is
not used by the preceding argument handling, but `read_cache()` must be run
*after* enabling sparse index for the command (so that the index is not
expanded unnecessarily) and *before* using the index for reset (so that it
is verified as uncorrupted).
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `update_index_from_diff` to set `skip-worktree` when applicable for
new index entries. When `git reset --mixed <tree-ish>` is run, entries in
the index with differences between the pre-reset HEAD and reset <tree-ish>
are identified and handled with `update_index_from_diff`. For each file, a
new cache entry in inserted into the index, created from the <tree-ish> side
of the reset (without changing the working tree). However, the newly-created
entry must have `skip-worktree` explicitly set in either of the following
scenarios:
1. the file is in the current index and has `skip-worktree` set
2. the file is not in the current index but is outside of a defined sparse
checkout definition
Not setting the `skip-worktree` bit leads to likely-undesirable results for
a user. It causes `skip-worktree` settings to disappear on the
"diff"-containing files (but *only* the diff-containing files), leading to
those files now showing modifications in `git status`. For example, when
running `git reset --mixed` in a sparse checkout, some file entries outside
of sparse checkout could show up as deleted, despite the user never deleting
anything (and not wanting them on-disk anyway).
Additionally, add a test to `t7102` to ensure `skip-worktree` is preserved
in a basic `git reset --mixed` scenario and update a failure-documenting
test from 19a0acc (t1092: test interesting sparse-checkout scenarios,
2021-01-23) with new expected behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename and invert value of `is_missing` to `is_in_reset_tree` to make the
variable more descriptive of what it represents.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, unpack_trees_options->reset was used to signal that it
was okay to delete any untracked files in the way. This was used by
`git read-tree --reset`, but then started appearing in other places as
well. However, many of the other uses should not be deleting untracked
files in the way. Change this value to an enum so that a value of 1
(i.e. "true") can be split into two:
UNPACK_RESET_PROTECT_UNTRACKED,
UNPACK_RESET_OVERWRITE_UNTRACKED
In order to catch accidental misuses (i.e. where folks call it the way
they traditionally used to), define the special enum value of
UNPACK_RESET_INVALID = 1
which will trigger a BUG().
Modify existing callers so that
read-tree --reset
reset --hard
checkout --force
continue using the UNPACK_RESET_OVERWRITE_UNTRACKED logic, while other
callers, including
am
checkout without --force
stash (though currently dead code; reset always had a value of 0)
numerous callers from rebase/sequencer to reset_head()
will use the new UNPACK_RESET_PROTECT_UNTRACKED value.
Also, note that it has been reported that 'git checkout <treeish>
<pathspec>' currently also allows overwriting untracked files[1]. That
case should also be fixed, but it does not use unpack_trees() and thus
is outside the scope of the current changes.
[1] https://lore.kernel.org/git/15dad590-087e-5a48-9238-5d2826950506@gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change several commands to remove ignored files by default when they are
in the way. Since some commands (checkout, merge) take a
--no-overwrite-ignore option to allow the user to configure this, and it
may make sense to add that option to more commands (and in the case of
merge, actually plumb that configuration option through to more of the
backends than just the fast-forwarding special case), add little
comments about where such flags would be used.
Incidentally, this fixes a test failure in t7112.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, every caller of unpack_trees() that wants to ensure ignored
files are overwritten by default needs to:
* allocate unpack_trees_options.dir
* flip the DIR_SHOW_IGNORED flag in unpack_trees_options.dir->flags
* call setup_standard_excludes
AND then after the call to unpack_trees() needs to
* call dir_clear()
* deallocate unpack_trees_options.dir
That's a fair amount of boilerplate, and every caller uses identical
code. Make this easier by instead introducing a new boolean value where
the default value (0) does what we want so that new callers of
unpack_trees() automatically get the appropriate behavior. And move all
the handling of unpack_trees_options.dir into unpack_trees() itself.
While preserve_ignored = 0 is the behavior we feel is the appropriate
default, we defer fixing commands to use the appropriate default until a
later commit. So, this commit introduces several locations where we
manually set preserve_ignored=1. This makes it clear where code paths
were previously preserving ignored files when they should not have been;
a future commit will flip these to instead use a value of 0 to get the
behavior we want.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c4a09cc9cc (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dwim_ref() allocs a new string into ref. Instead of setting to NULL to
discard it, we can FREE_AND_NULL.
This leak appears to have been introduced in:
4cf76f6bbf (builtin/reset: compute checkout metadata for reset, 2020-03-16)
This leak was found when running t0001 with LSAN, see also LSAN output below:
Direct leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x486514 in strdup /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0x9a7108 in xstrdup /home/ahunt/oss-fuzz/git/wrapper.c:29:14
#2 0x8add6b in expand_ref /home/ahunt/oss-fuzz/git/refs.c:670:12
#3 0x8ad777 in repo_dwim_ref /home/ahunt/oss-fuzz/git/refs.c:644:22
#4 0x6394af in dwim_ref /home/ahunt/oss-fuzz/git/./refs.h:162:9
#5 0x637e5c in cmd_reset /home/ahunt/oss-fuzz/git/builtin/reset.c:426:4
#6 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#7 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#8 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#9 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#10 0x69c5ce in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#11 0x7f57ebb9d349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the commit, and if we have it, the ref to the filters when we
perform a checkout. This should only be the case when we invoke git
reset --hard; the metadata will be unused otherwise.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few commands learned to take the pathspec from the
standard input or a named file, instead of taking it as the command
line arguments.
* am/pathspec-from-file:
commit: support the --pathspec-from-file option
doc: commit: synchronize <pathspec> description
reset: support the `--pathspec-from-file` option
doc: reset: synchronize <pathspec> description
pathspec: add new function to parse file
parse-options.h: add new options `--pathspec-from-file`, `--pathspec-file-nul`
Since 2f328c3d ("reset $sha1 $pathspec: require $sha1 only to be
treeish", 2013-01-14), we allowed "git reset $object -- $path" to reset
individual paths that match the pathspec to take the blob from a tree
object, not necessarily a commit, while the form to reset the tip of the
current branch to some other commit still must be given a commit.
Like resetting with paths, "git reset --patch" does not update HEAD, and
need not require a commit. The path-filtered form, "git reset --patch
$object -- $pathspec", has accepted a tree-ish since 2f328c3d.
"git reset --patch" is documented as accepting a <tree-ish> since
bf44142f ("reset: update documentation to require only tree-ish with
paths", 2013-01-16). Documentation changes are not required.
Loosen the restriction that requires a commit for the unfiltered "git
reset --patch $object".
Signed-off-by: Nika Layzell <nika@thelayzells.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `stdin`. Such use case it not
really expected. Also, it is harder to support in `git commit`, so
I decided to make it incompatible in all places.
2) It is not allowed to pass pathspec in both args and file.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` shows an example of good writing, follow it.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tree-walk API learned to pass an in-core repository
instance throughout more codepaths.
* nd/tree-walk-with-repo:
t7814: do not generate same commits in different repos
Use the right 'struct repository' instead of the_repository
match-trees.c: remove the_repo from shift_tree*()
tree-walk.c: remove the_repo from get_tree_entry_follow_symlinks()
tree-walk.c: remove the_repo from get_tree_entry()
tree-walk.c: remove the_repo from fill_tree_descriptor()
sha1-file.c: remove the_repo from read_object_with_reference()
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
While at there, clean up the_repo usage in builtin/merge-tree.c a tiny
bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new hook "post-index-change" is called when the on-disk index
file changes, which can help e.g. a virtualized working tree
implementation.
* bp/post-index-change-hook:
read-cache: add post-index-change hook
After a successful switch, if a merge, cherry-pick or revert is ongoing,
it is canceled. This behavior has been with us from the very early
beginning, soon after git-merge was created but never actually
documented [1]. It may be a good idea to be transparent and tell the
user if some operation is canceled.
I consider this a better way of telling the user than just adding a
sentence or two in git-checkout.txt, which will be mostly ignored
anyway.
PS. Originally I wanted to print more details like
warning: cancelling an in-progress merge from <SHA-1>
which may allow some level of undo if the user wants to. But that seems
a lot more work. Perhaps it can be improved later if people still want
that.
[1] ... and I will try not to argue whether it is a sensible behavior.
There is some more discussion here if people are interested:
CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a post-index-change hook that is invoked after the index is written in
do_write_locked_index().
This hook is meant primarily for notification, and cannot affect
the outcome of git commands that trigger the index write.
The hook is passed a flag to indicate whether the working directory was
updated or not and a flag indicating if a skip-worktree bit could have
changed. These flags enable the hook to optimize its response to the
index change notification.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This case is more interesting than other boring "remove the_repo"
commits because while we need access to the object database, we cannot
simply use r->index because unpack-trees.c can operate on a temporary
index, not $GIT_DIR/index. Ideally we should be able to pass an object
database to lookup_tree() but that ship has sailed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refresh_index() is done after a reset command as an optimization. Because
it can be an expensive call, warn the user if it takes more than 2 seconds
and tell them how to avoid it using the --quiet command line option or
reset.quiet config setting.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a reset.quiet config setting that sets the default value of the --quiet
flag when running the reset command. This enables users to change the
default behavior to take advantage of the performance advantages of
avoiding the scan for unstaged changes after reset. Defaults to false.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git reset is run with the --quiet flag, don't bother finding any
additional unstaged changes as they won't be output anyway. This speeds up
the git reset command by avoiding having to lstat() every file looking for
changes that aren't going to be reported anyway.
The savings can be significant. In a repo on Windows with 200K files
"git reset" drops from 7.16 seconds to 0.32 seconds for a savings of 96%.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff and textconv code has so widespread use that it's hard to simply
update their api and all call sites at once because it would result in
a big patch. For now reduce the_index references to two places:
diff_setup() and fill_textconv().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a large tree, the index needs to hold many cache entries
allocated on heap. These cache entries are now allocated out of a
dedicated memory pool to amortize malloc(3) overhead.
* jm/cache-entry-from-mem-pool:
block alloc: add validations around cache_entry lifecyle
block alloc: allocate cache entries from mem_pool
mem-pool: fill out functionality
mem-pool: add life cycle management functions
mem-pool: only search head block for available space
block alloc: add lifecycle APIs for cache_entry structs
read-cache: teach make_cache_entry to take object_id
read-cache: teach refresh_cache_entry to take istate
It has been observed that the time spent loading an index with a large
number of entries is partly dominated by malloc() calls. This change
is in preparation for using memory pools to reduce the number of
malloc() calls made to allocate cahce entries when loading an index.
Add an API to allocate and discard cache entries, abstracting the
details of managing the memory backing the cache entries. This commit
does actually change how memory is managed - this will be done in a
later commit in the series.
This change makes the distinction between cache entries that are
associated with an index and cache entries that are not associated with
an index. A main use of cache entries is with an index, and we can
optimize the memory management around this. We still have other cases
where a cache entry is not persisted with an index, and so we need to
handle the "transient" use case as well.
To keep the congnitive overhead of managing the cache entries, there
will only be a single discard function. This means there must be enough
information kept with the cache entry so that we know how to discard
them.
A summary of the main functions in the API is:
make_cache_entry: create cache entry for use in an index. Uses specified
parameters to populate cache_entry fields.
make_empty_cache_entry: Create an empty cache entry for use in an index.
Returns cache entry with empty fields.
make_transient_cache_entry: create cache entry that is not used in an
index. Uses specified parameters to populate
cache_entry fields.
make_empty_transient_cache_entry: create cache entry that is not used in
an index. Returns cache entry with
empty fields.
discard_cache_entry: A single function that knows how to discard a cache
entry regardless of how it was allocated.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate all git_path_* functions that are defined in path.c to take a
repository argument. Unlike other patches in this series, do not use the
#define trick, as we rewrite the whole function, which is rather small.
This doesn't migrate all the functions, as other builtins have their own
local path functions defined using GIT_PATH_FUNC. So keep that macro
around to serve the other locations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the last use of EMPTY_TREE_SHA1_BIN to use a direct copy from
the_hash_algo->empty_tree to avoid a dependency on a given hash
algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way "git reset --hard" reports the commit the updated HEAD
points at is made consistent with the way how the commit title is
generated by the other parts of the system. This matters when the
title is spread across physically multiple lines.
* tg/reset-hard-show-head-with-pretty:
reset --hard: make use of the pretty machinery
reset --hard currently uses its own logic for printing the first line of
the commit message in its output. Instead of just using the first line,
use the pretty machinery to create the output.
In addition to the easier to follow code, this makes the output more
consistent with other commands that print the title of the commit, such
as 'git commit --oneline' or 'git checkout', which both use
'pp_commit_easy()' with the CMIT_FMT_ONELINE modifier.
It is a slight change of the output if the second line of the commit
message is not a blank line, i.e. if the commit message is
foo
bar
previously we would print "HEAD is now at 000000 foo", while after
this change we print "HEAD is now at 000000 foo bar", same as 'git log
--oneline' shows "000000 foo bar".
So this does make the output more consistent with other commands, and
'reset' is a porcelain command, so nobody should be parsing the output
in scripts.
The current behaviour dates back to 0e5a7faa3a ("Make "git reset" a
builtin.", 2007-09-11), so I assume (without digging into the old
codebase too much) that the logic was implemented because there was
no convenience function such as 'pp_commit_easy' that would do this
already.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create header for pretty.c to make formatting interface more structured.
This is a middle point, this file would be merged further with other
files which contain formatting stuff.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
Remove the `DIFF_OPT_SET` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_SET(&E, fld)
+ E.flags.fld = 1
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_SET(ptr, fld)
+ ptr->flags.fld = 1
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of explicitly setting the 'DIFF_OPT_OVERRIDE_SUBMODULE_CONFIG'
flag, use the 'DIFF_OPT_SET' macro.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert delete_ref and refs_delete_ref to take a pointer to struct
object_id. Update the documentation accordingly, including referring to
null_oid in lowercase, as it is not a #define constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many of our programs consider that it is OK to release dynamic
storage that is used throughout the life of the program by simply
exiting, but this makes it harder to leak detection tools to avoid
reporting false positives. Plug many existing leaks and introduce
a mechanism for developers to mark that the region of memory
pointed by a pointer is not lost/leaking to help these tools.
* jk/leak-checkers:
add UNLEAK annotation for reducing leak false positives
set_git_dir: handle feeding gitdir to itself
repository: free fields before overwriting them
reset: free allocated tree buffers
reset: make tree counting less confusing
config: plug user_config leak
update-index: fix cache entry leak in add_one_file()
add: free leaked pathspec after add_files_to_cache()
test-lib: set LSAN_OPTIONS to abort by default
test-lib: --valgrind should not override --verbose-log
We read the tree objects with fill_tree_descriptor(), but
never actually free the resulting buffers, causing a memory
leak. This isn't a huge deal because we call this code at
most twice per program invocation. But it does potentially
double our heap usage if you have large root trees. Let's
free the trees before returning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on whether we're in --keep mode, git-reset may
feed one or two trees to unpack_trees(). We start a counter
at "1" and then increment it to "2" only for the two-tree
case. But that means we must always subtract one to find the
correct array slot to fill with each descriptor.
Instead, let's start at "0" and just increment our counter
after adding each tree. This skips the extra subtraction,
and will make things much easier when we start to actually
free our tree buffers.
While we're at it, let's make the first allocation use the
slot at "desc + nr", too, even though we know "nr" is 0 at
that point. It makes the two fill_tree_descriptor() calls
consistent (always "desc + nr", followed by always
incrementing "nr").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that it's safe to declare a "struct lock_file" on the
stack, we can do so (and avoid an intentional leak). These
leaks were found by running t0000 and t0001 under valgrind
(though certainly other similar leaks exist and just don't
happen to be exercised by those tests).
Initializing the lock_file's inner tempfile with NULL is not
strictly necessary in these cases, but it's a good practice
to model. It means that if we were to call a function like
rollback_lock_file() on a lock that was never taken in the
first place, it becomes a quiet noop (rather than undefined
behavior).
Likewise, it's always safe to rollback_lock_file() on a file
that has already been committed or deleted, since that
operation is a noop on an inactive lockfile (and that's why
the case in config.c can drop the "if (lock)" check as we
move away from using a pointer).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
All callers of fill_tree_descriptor() have been converted to object_id
already, so convert that function as well. As a nice side-effect we get
rid of NULL checks in tree-diff.c, as fill_tree_descriptor() already
does them for us.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the submodule-config subsystem can lazily read the gitmodules
file we no longer need to explicitly pre-read the gitmodules by calling
'gitmodules_config()' so let's remove it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit aee9c7d65 (Submodules: Add the new "ignore" config option for
diff and status) introduced the ignore configuration option for
submodules so that configured submodules could be omitted from the
status and diff commands. Because this flag is respected in the diff
machinery it has the unintended consequence of potentially prohibiting
users from adding or resetting a submodule, even when a path to the
submodule is explicitly given.
Ensure that submodules can be added or set, even if they are configured
to be ignored, by setting the `DIFF_OPT_OVERRIDE_SUBMODULE_CONFIG` diff
flag.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many commands learned to pay attention to submodule.recurse
configuration.
* sb/submodule-blanket-recursive:
builtin/fetch.c: respect 'submodule.recurse' option
builtin/push.c: respect 'submodule.recurse' option
builtin/grep.c: respect 'submodule.recurse' option
Introduce 'submodule.recurse' option for worktree manipulators
submodule loading: separate code path for .gitmodules and config overlay
reset/checkout/read-tree: unify config callback for submodule recursion
submodule test invocation: only pass additional arguments
submodule recursing: do not write a config variable twice
Any command that understands '--recurse-submodules' can have its
default changed to true, by setting the new 'submodule.recurse'
option.
This patch includes read-tree/checkout/reset for working tree
manipulating commands. Later patches will cover other commands.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback function is essentially duplicated 3 times. Remove all
of them and offer a new callback function, that lives in submodule.c
By putting the callback function there, we no longer need the function
'set_config_update_recurse_submodules', nor duplicate the global variable
in each builtin as well as submodule.c
In the three builtins we have different 2 ways how to load the .gitmodules
and config file, which are slightly different. git-checkout has to load
the submodule config all the time due to 23b4c7bcc5 (checkout: Use
submodule.*.ignore settings from .git/config and .gitmodules, 2010-08-28)
git-reset and git-read-tree do not respect these diff settings, so loading
the submodule configuration is optional. Also put that into submodule.c
for code deduplication.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line option for '--recurse-submodules' is implemented
using an OPTION_CALLBACK, which takes both the callback (that sets
the file static global variable) as well as passes the same file
static global variable to the option parsing machinery to assign it.
This is fixed in this commit by passing NULL as the variable. The
callback sets it instead
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify parse_pathspec() codepath and stop it from looking at the
default in-core index.
* bw/pathspec-sans-the-index:
pathspec: convert find_pathspecs_matching_against_index to take an index
pathspec: remove PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP
ls-files: prevent prune_cache from overeagerly pruning submodules
pathspec: remove PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE flag
submodule: add die_in_unpopulated_submodule function
pathspec: provide a more descriptive die message
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
Since (ae8d08242 pathspec: pass directory indicator to
match_pathspec_item()) the path matching logic has been able to cope
with submodules without needing to strip off a trailing slash if a path
refers to a submodule.
Since stripping the slash is no longer necessary, remove the
PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP flag.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert parse_tree_indirect to take a pointer to struct object_id.
Update all the callers. This transformation was achieved using the
following semantic patch and manual updates to the declaration and
definition. Update builtin/checkout.c manually as well, since it uses a
ternary expression not handled by the semantic patch.
@@
expression E1;
@@
- parse_tree_indirect(E1.hash)
+ parse_tree_indirect(&E1)
@@
expression E1;
@@
- parse_tree_indirect(E1->hash)
+ parse_tree_indirect(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to convert parse_tree_indirect.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-reset is yet another working tree manipulator, which should
be taught about submodules.
When a user uses git-reset and requests to recurse into submodules,
this will reset the submodules to the object name as recorded in the
superproject, detaching the HEADs.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the current branch is renamed with 'git branch -m/-M' or deleted
with 'git update-ref -m<msg> -d', the event is recorded in HEAD's log
with an empty message. In preparation for adding a more meaningful
message to HEAD's log in these cases, update delete_ref() to take a
message argument and pass it along to ref_transaction_delete().
Modify all callers to pass NULL for the new message argument; no
change in behavior is intended.
Note that this is relevant for HEAD's log but not for the deleted
ref's log, which is currently deleted along with the ref. Even if it
were not, an entry for the deletion wouldn't be present in the deleted
ref's log. files_transaction_commit() writes to the log if
REF_NEEDS_COMMIT or REF_LOG_ONLY are set, but lock_ref_for_update()
doesn't set REF_NEEDS_COMMIT for the deleted ref because REF_DELETING
is set. In contrast, the update for HEAD has REF_LOG_ONLY set by
split_head_update(), resulting in the deletion being logged.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of the hold_locked_index() function pass 0 when they want to
prepare to write a new version of the index file without wishing to
die or emit an error message when the request fails (e.g. somebody
else already held the lock), and pass 1 when they want the call to
die upon failure.
This option is called LOCK_DIE_ON_ERROR by the underlying lockfile
API, and the hold_locked_index() function translates the paramter to
LOCK_DIE_ON_ERROR when calling the hold_lock_file_for_update().
Replace these hardcoded '1' with LOCK_DIE_ON_ERROR and stop
translating. Callers other than the ones that are replaced with
this change pass '0' to the function; no behaviour change is
intended with this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Among the callers of hold_locked_index() that passes 0:
- diff.c::refresh_index_quietly() at the end of "git diff" is an
opportunistic update; it leaks the lockfile structure but it is
just before the program exits and nobody should care.
- builtin/describe.c::cmd_describe(),
builtin/commit.c::cmd_status(),
sequencer.c::read_and_refresh_cache() are all opportunistic
updates and they are OK.
- builtin/update-index.c::cmd_update_index() takes a lock upfront
but we may end up not needing to update the index (i.e. the
entries may be fully up-to-date), in which case we do not need to
issue an error upon failure to acquire the lock. We do diagnose
and die if we indeed need to update, so it is OK.
- wt-status.c::require_clean_work_tree() IS BUGGY. It asks
silence, does not check the returned value. Compare with
callsites like cmd_describe() and cmd_status() to notice that it
is wrong to call update_index_if_able() unconditionally.
The <tree-ish> parameter is actually optional (see man page).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
When there are blank lines at the beginning of a commit message, the
pretty printing machinery already skips them when showing a commit
subject (or the complete commit message). We shall henceforth do the
same when reporting the commit subject after the user called
git reset --hard <commit>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct diff_filespec's sha1 member to use a struct object_id
called "oid" instead. The following Coccinelle semantic patch was used
to implement this, followed by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1
+ o.oid.hash
@@
struct diff_filespec *p;
@@
- p->sha1
+ p->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes a pointer to a pathspec structure, and releases
the resources held by it, but does not free() the structure itself.
Such a function should be called "clear", not "free".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
Move "commit->buffer" out of the in-core commit object and keep
track of their lengths. Use this to optimize the code paths to
validate GPG signatures in commit objects.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
Like the callsites in the previous commit, logmsg_reencode
already falls back to read_sha1_file when necessary.
However, I split its conversion out into its own commit
because it's a bit more complex.
We return either:
1. The original commit->buffer
2. A newly allocated buffer from read_sha1_file
3. A reencoded buffer (based on either 1 or 2 above).
while trying to do as few extra reads/allocations as
possible. Callers currently free the result with
logmsg_free, but we can simplify this by pointing them
straight to unuse_commit_buffer. This is a slight layering
violation, in that we may be passing a buffer from (3).
However, since the end result is to free() anything except
(1), which is unlikely to change, and because this makes the
interface much simpler, it's a reasonable bending of the
rules.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from logmsg_reencode may be either a newly
allocated buffer or a pointer to the existing commit->buffer.
We would not want the caller to accidentally free() or
modify the latter, so let's mark it as const. We can cast
away the constness in logmsg_free, but only once we have
determined that it is a free-able buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given that these constants are only being used when updating
references, it is inappropriate to give them such generic names as
"DIE_ON_ERR". So prefix their names with "UPDATE_REFS_".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git reset" needs to refresh the index when working in a working
tree (it can also be used to match the index to the HEAD in an
otherwise bare repository), but it failed to set up the working
tree properly, causing GIT_WORK_TREE to be ignored.
* nd/reset-setup-worktree:
reset: optionally setup worktree and refresh index on --mixed
Refreshing index requires work tree. So we have two options: always
set up work tree (and refuse to reset if failing to do so), or make
refreshing index optional.
As refreshing index is not the main task, it makes more sense to make
it optional. This allows us to still work in a bare repository to update
what is in the index.
Reported-by: Patrick Palka <patrick@parcs.ath.cx>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --mixed is used, entries could be removed from index if the
target ref does not have them. When "reset" is used in preparation for
commit spliting (in a dirty worktree), it could be hard to track what
files to be added back. The new option --intent-to-add simplifies it
by marking all removed files intent-to-add.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
The add--interactive --patch mode adjusts the UI based on
whether we are pulling changes from HEAD or elsewhere (in
the former case it asks to unstage the reverse hunk, rather
than apply the forward hunk).
Commit 166ec2e taught reset to work on an unborn branch, but
in doing so, switched to always providing add--interactive
with the sha1 rather than the symbolic name. This meant we
always used the "apply" interface, even for "git reset -p
HEAD".
We can fix this by passing the symbolic name to
add--interactive. Since it understands unborn branches
these days, we do not even have to cover this special case
ourselves; we can simply pass HEAD.
The tests in t7105 now check that the right interface is
used in each circumstance (and notice the regression from
166ec2e we are fixing). The test in t7106 checks that we
get this right for the unborn case, too (not a regression,
since it didn't work at all before, but a nice improvement).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give "update-refs" a "--stdin" option to read multiple update
requests and perform them in an all-or-none fashion.
* bk/refs-multi-update:
update-ref: add test cases covering --stdin signature
update-ref: support multiple simultaneous updates
refs: add update_refs for multiple simultaneous updates
refs: add function to repack without multiple refs
refs: factor delete_ref loose ref step into a helper
refs: factor update_ref steps into helpers
refs: report ref type from lock_any_ref_for_update
reset: rename update_refs to reset_refs
When using tab-completion, a directory path will often end with a
trailing slash which currently confuses "git reset" when dealing with
submodules. Now that we have parse_pathspec we can easily handle this
by simply adding the PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP flag.
To do this, we need to move the read_cache() call before the
parse_pathspec() call. All of the existing paths through cmd_reset()
that do not die early already call read_cache() at some point, so there
is no performance impact to doing this in the common case.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
