'git submodule--helper update-clone' has logic to retry failed clones
a second time. For this purpose, there is a list of submodules to clone,
and a second list that is filled with the submodules to retry. Within
these lists, the submodules are identified by an index as if both lists
were just appended.
This works nicely except when the second clone attempt fails as well. To
report an error, the identifying index must be adjusted by an offset so
that it can be used as an index into the second list. However, the
calculation uses the logical total length of the lists so that the result
always points one past the end of the second list.
Pick the correct index.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update" that drives many "git clone" could
eventually hit flaky servers/network conditions on one of the
submodules; the command learned to retry the attempt.
* sb/submodule-clone-retry:
submodule update: continue when a clone fails
submodule--helper: initial clone learns retry logic
Fix an unintended regression in v2.9 that breaks "clone --depth"
that recurses down to submodules by forcing the submodules to also
be cloned shallowly, which many server instances that host upstream
of the submodules are not prepared for.
* sb/clone-shallow-passthru:
clone: do not let --depth imply --shallow-submodules
"git repack" learned the "--keep-unreachable" option, which sends
loose unreachable objects to a pack instead of leaving them loose.
This helps heuristics based on the number of loose objects
(e.g. "gc --auto").
* jk/repack-keep-unreachable:
repack: extend --keep-unreachable to loose objects
repack: add --keep-unreachable option
repack: document --unpack-unreachable option
Teach format-patch and mailsplit (hence "am") how a line that
happens to begin with "From " in the e-mail message is quoted with
">", so that these lines can be restored to their original shape.
* ew/mboxrd-format-am:
am: support --patch-format=mboxrd
mailsplit: support unescaping mboxrd messages
pretty: support "mboxrd" output format
Further preparatory clean-up for "worktree" feature continues.
* nd/worktree-cleanup-post-head-protection:
worktree: simplify prefixing paths
worktree: avoid 0{40}, too many zeroes, hard to read
worktree.c: use is_dot_or_dotdot()
git-worktree.txt: keep subcommand listing in alphabetical order
worktree.c: rewrite mark_current_worktree() to avoid strbuf
completion: support git-worktree
The ownership rule for the piece of memory that hold references to
be fetched in "git fetch" was screwy, which has been cleaned up.
* km/fetch-do-not-free-remote-name:
builtin/fetch.c: don't free remote->name after fetch
Instead of taking advantage of a struct string_list that is
allocated with all NULs happens to be STRING_LIST_INIT_NODUP kind,
initialize them explicitly as such, to document their behaviour
better.
* jk/string-list-static-init:
use string_list initializer consistently
blame,shortlog: don't make local option variables static
interpret-trailers: don't duplicate option strings
parse_opt_string_list: stop allocating new strings
Allow messages that are generated by auto gc during "git push" on
the receiving end to be explicitly passed back to the sending end
over sideband, so that they are shown with "remote: " prefix to
avoid confusing the users.
* lf/receive-pack-auto-gc-to-client:
receive-pack: send auto-gc output over sideband 2
"git update-index --add --chmod=+x file" may be usable as an escape
hatch, but not a friendly thing to force for people who do need to
use it regularly. "git add --chmod=+x file" can be used instead.
* et/add-chmod-x:
add: add --chmod=+x / --chmod=-x options
The "git apply" standalone program is being libified; this is the
first step to move many state variables into a structure that can
be explicitly (re)initialized to make the machinery callable more
than once.
The next step that moves some remaining state variables into the
structure and turns die()s into an error return that propagates up
to the caller is not queued yet but in flight. It would be good to
review the above first and give the remainder of the series a solid
base to build on.
* cc/apply-introduce-state: (50 commits)
builtin/apply: remove misleading comment on lock_file field
builtin/apply: move 'newfd' global into 'struct apply_state'
builtin/apply: add 'lock_file' pointer into 'struct apply_state'
builtin/apply: move applying patches into apply_all_patches()
builtin/apply: move 'state' check into check_apply_state()
builtin/apply: move 'symlink_changes' global into 'struct apply_state'
builtin/apply: move 'fn_table' global into 'struct apply_state'
builtin/apply: move 'state_linenr' global into 'struct apply_state'
builtin/apply: move 'max_change' and 'max_len' into 'struct apply_state'
builtin/apply: move 'ws_ignore_action' into 'struct apply_state'
builtin/apply: move 'ws_error_action' into 'struct apply_state'
builtin/apply: move 'applied_after_fixing_ws' into 'struct apply_state'
builtin/apply: move 'squelch_whitespace_errors' into 'struct apply_state'
builtin/apply: remove whitespace_option arg from set_default_whitespace_mode()
builtin/apply: move 'whitespace_option' into 'struct apply_state'
builtin/apply: move 'whitespace_error' global into 'struct apply_state'
builtin/apply: move 'root' global into 'struct apply_state'
builtin/apply: move 'p_value_known' global into 'struct apply_state'
builtin/apply: move 'p_value' global into 'struct apply_state'
builtin/apply: move 'has_include' global into 'struct apply_state'
...
In v2.9.0, we prematurely flipped the default to force cloning
submodules shallowly, when the superproject is getting cloned
shallowly. This is likely to fail when the upstream repositories
submodules are cloned from a repository that is not prepared to
serve histories that ends at a commit that is not at the tip of a
branch, and we know the world is not yet ready.
Use a safer default to clone the submodules fully, unless the user
tells us that she knows that the upstream repository of the
submodules are willing to cooperate with "--shallow-submodules"
option.
Noticed-by: Vadim Eisenberg <VADIME@il.ibm.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --count" whose walk-length is limited with "-n"
option did not work well with the counting optimized to look at the
bitmap index.
* jk/rev-list-count-with-bitmap:
rev-list: disable bitmaps when "-n" is used with listing objects
rev-list: "adjust" results of "--count --use-bitmap-index -n"
We usually call a function that clears the contents a data
structure X without freeing the structure itself clear_X(), and
call a function that does clear_X() and also frees it free_X().
free_pathspec() function has been renamed to clear_pathspec()
to avoid confusion.
* jc/clear-pathspec:
pathspec: rename free_pathspec() to clear_pathspec()
"git worktree add" learned that '-' can be used as a short-hand for
"@{-1}", the previous branch.
* jg/dash-is-last-branch-in-worktree-add:
worktree: allow "-" short-hand for @{-1} in add command
An upstream project can make a recommendation to shallowly clone
some submodules in the .gitmodules file it ships.
* sb/submodule-recommend-shallowness:
submodule update: learn `--[no-]recommend-shallow` option
submodule-config: keep shallow recommendation around
"git pull --rebase --verify-signature" learned to warn the user
that "--verify-signature" is a no-op when rebasing.
* ah/no-verify-signature-with-pull-rebase:
pull: warn on --verify-signatures with --rebase
If you use "repack -adk" currently, we will pack all objects
that are already packed into the new pack, and then drop the
old packs. However, loose unreachable objects will be left
as-is. In theory these are meant to expire eventually with
"git prune". But if you are using "repack -k", you probably
want to keep things forever and therefore do not run "git
prune" at all. Meaning those loose objects may build up over
time and end up fooling any object-count heuristics (such as
the one done by "gc --auto", though since git-gc does not
support "repack -k", this really applies to whatever custom
scripts people might have driving "repack -k").
With this patch, we instead stuff any loose unreachable
objects into the pack along with the already-packed
unreachable objects. This may seem wasteful, but it is
really no more so than using "repack -k" in the first place.
We are at a slight disadvantage, in that we have no useful
ordering for the result, or names to hand to the delta code.
However, this is again no worse than what "repack -k" is
already doing for the packed objects. The packing of these
objects doesn't matter much because they should not be
accessed frequently (unless they actually _do_ become
referenced, but then they would get moved to a different
part of the packfile during the next repack).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual way to do a full repack (and what is done by
git-gc) is to run "repack -Ad --unpack-unreachable=<when>",
which will loosen any unreachable objects newer than
"<when>", and drop any older ones.
This is a safer alternative to "repack -ad", because
"<when>" becomes a grace period during which we will not
drop any new objects that are about to be referenced.
However, it isn't perfectly safe. It's always possible that
a process is about to reference an old object. Even if that
process were to take care to update the timestamp on the
object, there is no atomicity with a simultaneously running
"repack" process.
So while unlikely, there is a small race wherein we may drop
an object that is in the process of being referenced. If you
do automated repacking on a large number of active
repositories, you may hit it eventually, and the result is a
corrupted repository.
It would be nice to fix that race in the long run, but it's
complicated. In the meantime, there is a much simpler
strategy for automated repository maintenance: do not drop
objects at all. We already have a "--keep-unreachable"
option in pack-objects; we just need to plumb it through
from git-repack.
Note that this _isn't_ plumbed through from git-gc, so at
this point it's strictly a tool for people doing their own
advanced repository maintenance strategy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These callers appear to expect that deref_tag() is to peel one layer
of a tag, but the function does not work that way; it has its own
loop to unwrap tags until an object that is not a tag appears.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make fetch's string_list of remote names own all of its string items
(strdup'ing when necessary) so that it can deallocate them safely
when clearing.
Signed-off-by: Keith McGuigan <kmcguigan@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two types of string_lists: those that own the
string memory, and those that don't. You can tell the
difference by the strdup_strings flag, and one should use
either STRING_LIST_INIT_DUP, or STRING_LIST_INIT_NODUP as an
initializer.
Historically, the normal all-zeros initialization has
corresponded to the NODUP case. Many sites use no
initializer at all, and that works as a shorthand for that
case. But for a reader of the code, it can be hard to
remember which is which. Let's be more explicit and actually
have each site declare which type it means to use.
This is a fairly mechanical conversion; I assumed each site
was correct as-is, and just switched them all to NODUP.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need for these option variables to be static,
except that they are referenced by the options array itself,
which is static. But having all of this static is simply
unnecessary and confusing (and inconsistent with most other
commands, which either use a static global option list or a
true function-local one).
Note that in some cases we may need to actually initialize
the variables (since we cannot rely on BSS to do so). This
is a net improvement to readability, though, as we can use
the more verbose initializers for our string_lists.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to do so; the argv strings will last until
the end of the program.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each submodule that is attempted to be cloned, will be retried once in
case of failure after all other submodules were cloned. This helps to
mitigate ephemeral server failures and increases chances of a reliable
clone of a repo with hundreds of submodules immensely.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a follow up commit for f932729c (memoize common git-path
"constant" files, 10-Aug-2015).
The many function calls to git_path() are replaced by
git_path_commit_editmsg() and which thus eliminates the need to repeatedly
compute the location of "COMMIT_EDITMSG".
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The executable bit will not be detected (and therefore will not be
set) for paths in a repository with `core.filemode` set to false,
though the users may still wish to add files as executable for
compatibility with other users who _do_ have `core.filemode`
functionality. For example, Windows users adding shell scripts may
wish to add them as executable for compatibility with users on
non-Windows.
Although this can be done with a plumbing command
(`git update-index --add --chmod=+x foo`), teaching the `git-add`
command allows users to set a file executable with a command that
they're already familiar with.
Signed-off-by: Edward Thomson <ethomson@edwardthomson.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many commands normalize command line arguments from NFD to NFC
variant of UTF-8 on OSX, but commands in the "diff" family did
not, causing "git diff $path" to complain that no such path is
known to Git. They have been taught to do the normalization.
* ar/diff-args-osx-precompose:
diff: run arguments through precompose_argv
A bash-ism "local" has been removed from "git submodule" scripted
Porcelain.
* sb/submodule-helper-relative-path:
submodule: remove bashism from shell script
The way how "submodule--helper list" signals unmatch error to its
callers has been updated.
* sb/submodule-helper-list-signal-unmatch-via-exit-status:
submodule--helper: offer a consistent API
Just like pointer field like prefix, the piece of memory pointed at
by lock_file field is not owned by the apply_state structure. It is
true that the caller needs to be careful about the lifetime rule for
lockfile instances, but that is none of this API's business.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Combined with "git format-patch --pretty=mboxrd", this should
allow us to round-trip commit messages with embedded mbox
"From " lines without corruption.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will allow us to parse the output of --pretty=mboxrd
and the output of other mboxrd generators.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This output format prevents format-patch output from breaking
readers if somebody copy+pasted an mbox into a commit message.
Unlike the traditional "mboxo" format, "mboxrd" is designed to
be fully-reversible. "mboxrd" also gracefully degrades to
showing extra ">" in existing "mboxo" readers.
This degradation is preferable to breaking message splitting
completely, a problem I've seen in "mboxcl" due to having
multiple, non-existent, or inaccurate Content-Length headers.
"mboxcl2" is a non-starter since it's inherits the problems
of "mboxcl" while being completely incompatible with existing
tooling based around mailsplit.
ref: http://homepage.ntlworld.com/jonathan.deboynepollard/FGA/mail-mbox-formats.html
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redirect auto-gc output to the sideband such that it is visible to all
clients. As a side effect, all auto-gc error messages are now prefixed
with "remote: " before being printed to stderr on the client-side which
makes it easier to understand that those error messages originate from
the server.
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To libify the apply functionality the 'newfd' variable should
not be static and global to the file. Let's move it into
'struct apply_state'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cannot have a 'struct lock_file' allocated on the stack, as lockfile.c
keeps a linked list of all created lock_file structures.
Also 'struct apply_state' users might later want the same 'struct lock_file'
instance to be reused by different series of calls to the apply api.
So let's add a 'struct lock_file *lock_file' pointer into 'struct apply_state'
and have the user of 'struct apply_state' allocate memory for the actual
'struct lock_file' instance.
Let's also add an argument to init_apply_state(), so that the caller can
easily supply a pointer to the allocated instance.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can ask rev-list to use bitmaps to speed up an --objects
traversal, which should generally give you your answers much
faster.
Likewise, you can ask rev-list to limit such a traversal
with `-n`, in which case we'll show only a limited set of
commits (and only the tree and commit objects directly
reachable from those commits).
But if you do both together, the results are nonsensical. We
end up limiting any fallback traversal we do to _find_ the
bitmaps, but the actual set of objects we output will be
picked arbitrarily from the union of any bitmaps we do find,
and will involve the objects of many more commits.
It's possible that somebody might want this as a "show me
what you can, but limit the amount of work you do" flag.
But as with the prior commit clamping "--count", the results
are basically non-deterministic; you'll get the values from
some commits between `n` and the total number, and you can't
tell which.
And unlike the `--count` case, we can't easily generate the
"real" value from the bitmap values (you can't just walk
back `-n` commits and subtract out the reachable objects
from the boundary commits; the bitmaps for `X` record its
total reachability, so you don't know which objects are
directly from `X` itself, which from `X^`, and so on).
So let's just fallback to the non-bitmap code path in this
case, so we always give a sane answer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you ask rev-list for:
git rev-list --count --use-bitmap-index HEAD
we optimize out the actual traversal and just give you the
number of bits set in the commit bitmap. This is faster,
which is good.
But if you ask to limit the size of the traversal, like:
git rev-list --count --use-bitmap-index -n 100 HEAD
we'll still output the full bitmapped number we found. On
the surface, that might even seem OK. You explicitly asked
to use the bitmap index, and it was cheap to compute the
real answer, so we gave it to you.
But there's something much more complicated going on under
the hood. If we don't have a bitmap directly for HEAD, then
we have to actually traverse backwards, looking for a
bitmapped commit. And _that_ traversal is bounded by our
`-n` count.
This is a good thing, because it bounds the work we have to
do, which is probably what the user wanted by asking for
`-n`. But now it makes the output quite confusing. You might
get many values:
- your `-n` value, if we walked back and never found a
bitmap (or fewer if there weren't that many commits)
- the actual full count, if we found a bitmap root for
every path of our traversal with in the `-n` limit
- any number in between! We might have walked back and
found _some_ bitmaps, but then cut off the traversal
early with some commits not accounted for in the result.
So you cannot even see a value higher than your `-n` and say
"OK, bitmaps kicked in, this must be the real full count".
The only sane thing is for git to just clamp the value to a
maximum of the `-n` value, which means we should output the
exact same results whether bitmaps are in use or not.
The test in t5310 demonstrates this by using `-n 1`.
Without this patch we fail in the full-bitmap case (where we
do not have to traverse at all) but _not_ in the
partial-bitmap case (where we have to walk down to find an
actual bitmap). With this patch, both cases just work.
I didn't implement the crazy in-between case, just because
it's complicated to set up, and is really a subset of the
full-count case, which we do cover.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes a pointer to a pathspec structure, and releases
the resources held by it, but does not free() the structure itself.
Such a function should be called "clear", not "free".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio pointed out `relative_path` was using bashisms via the
local variables. As the longer term goal is to rewrite most of the
submodule code in C, do it now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 48308681 (2016-02-29, git submodule update: have a dedicated helper
for cloning), the helper communicated errors back only via exit code,
and dance with printing '#unmatched' in case of error was left to
git-submodule.sh as it uses the output of the helper and pipes it into
shell commands. This change makes the helper consistent by never
printing '#unmatched' in the helper but always handling these piping
issues in the actual shell script.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To libify the apply functionality we should provide a function to
apply many patches. Let's move the code to do that into a new
apply_all_patches() function.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To libify the apply functionality we should provide a function
to check that the values in a 'struct apply_state' instance are
coherent. Let's move the code to do that into a new
check_apply_state() function.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To libify the apply functionality the 'symlink_changes' variable should
not be static and global to the file. Let's move it into
'struct apply_state'.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
