Pruning generally has to traverse the whole commit graph in order to
see which objects are reachable. This is the exact problem that
reachability bitmaps were meant to solve, so let's use them (if they're
available, of course).
Here are timings on git.git:
Test HEAD^ HEAD
------------------------------------------------------------------------
5304.6: prune with bitmaps 3.65(3.56+0.09) 1.01(0.92+0.08) -72.3%
And on linux.git:
Test HEAD^ HEAD
--------------------------------------------------------------------------
5304.6: prune with bitmaps 35.05(34.79+0.23) 3.00(2.78+0.21) -91.4%
The tests show a pretty optimal case, as we'll have just repacked and
should have pretty good coverage of all refs with our bitmaps. But
that's actually pretty realistic: normally prune is run via "gc" right
after repacking.
A few notes on the implementation:
- the change is actually in reachable.c, so it would improve
reachability traversals by "reflog expire --stale-fix", as well.
Those aren't performed regularly, though (a normal "git gc" doesn't
use --stale-fix), so they're not really worth measuring. There's a
low chance of regressing that caller, since the use of bitmaps is
totally transparent from the caller's perspective.
- The bitmap case could actually get away without creating a "struct
object", and instead the caller could just look up each object id in
the bitmap result. However, this would be a marginal improvement in
runtime, and it would make the callers much more complicated. They'd
have to handle both the bitmap and non-bitmap cases separately, and
in the case of git-prune, we'd also have to tweak prune_shallow(),
which relies on our SEEN flags.
- Because we do create real object structs, we go through a few
contortions to create ones of the right type. This isn't strictly
necessary (lookup_unknown_object() would suffice), but it's more
memory efficient to use the correct types, since we already know
them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The general strategy of "git prune" is to do a full reachability walk,
then for each loose object see if we found it in our walk. But if we
don't have any loose objects, we don't need to do the expensive walk in
the first place.
This patch postpones that walk until the first time we need to see its
results.
Note that this is really a specific case of a more general optimization,
which is that we could traverse only far enough to find the object under
consideration (i.e., stop the traversal when we find it, then pick up
again when asked about the next object, etc). That could save us in some
instances from having to do a full walk. But it's actually a bit tricky
to do with our traversal code, and you'd need to do a full walk anyway
if you have even a single unreachable object (which you generally do, if
any objects are actually left after running git-repack).
So in practice this lazy-load of the full walk catches one easy but
common case (i.e., you've just repacked via git-gc, and there's nothing
unreachable).
The perf script is fairly contrived, but it does show off the
improvement:
Test HEAD^ HEAD
-------------------------------------------------------------------------
5304.4: prune with no objects 3.66(3.60+0.05) 0.00(0.00+0.00) -100.0%
and would let us know if we accidentally regress this optimization.
Note also that we need to take special care with prune_shallow(), which
relies on us having performed the traversal. So this optimization can
only kick in for a non-shallow repository. Since this is easy to get
wrong and is not covered by existing tests, let's add an extra test to
t5304 that covers this case explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the functions in our test library check that they were invoked
properly with conditions like this:
test "$#" = 2 ||
error "bug in the test script: not 2 parameters to test-expect-success"
If this particular condition is triggered, then 'error' will abort the
whole test script with a bold red error message [1] right away.
However, under certain circumstances the test script will be aborted
completely silently, namely if:
- a similar condition in a test helper function like
'test_line_count' is triggered,
- which is invoked from the test script's "main" shell [2],
- and the test script is run manually (i.e. './t1234-foo.sh' as
opposed to 'make t1234-foo.sh' or 'make test') [3]
- and without the '--verbose' option,
because the error message is printed from within 'test_eval_', where
standard output is redirected either to /dev/null or to a log file.
The only indication that something is wrong is that not all tests in
the script are executed and at the end of the test script's output
there is no "# passed all N tests" message, which are subtle and can
easily go unnoticed, as I had to experience myself.
Send these "bug in the test script" error messages directly to the
test scripts standard error and thus to the terminal, so those bugs
will be much harder to overlook. Instead of updating all ~20 such
'error' calls with a redirection, let's add a BUG() function to
'test-lib.sh', wrapping an 'error' call with the proper redirection
and also including the common prefix of those error messages, and
convert all those call sites [4] to use this new BUG() function
instead.
[1] That particular error message from 'test_expect_success' is
printed in color only when running with or without '--verbose';
with '--tee' or '--verbose-log' the error is printed without
color, but it is printed to the terminal nonetheless.
[2] If such a condition is triggered in a subshell of a test, then
'error' won't be able to abort the whole test script, but only the
subshell, which in turn causes the test to fail in the usual way,
indicating loudly and clearly that something is wrong.
[3] Well, 'error' aborts the test script the same way when run
manually or by 'make' or 'prove', but both 'make' and 'prove' pay
attention to the test script's exit status, and even a silently
aborted test script would then trigger those tools' usual
noticable error messages.
[4] Strictly speaking, not all those 'error' calls need that
redirection to send their output to the terminal, see e.g.
'test_expect_success' in the opening example, but I think it's
better to be consistent.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
p3400 makes a copy of the current repository to test git-rebase
performance, and creates new branches in the copy with `git checkout
-b'. If the original repository has branches with the same name as the
script is trying to create, this operation will fail.
This replaces these calls by `git checkout -B' to force the creation and
update of these branches.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update fsck.skipList implementation and documentation.
* ab/fsck-skiplist:
fsck: support comments & empty lines in skipList
fsck: use oidset instead of oid_array for skipList
fsck: use strbuf_getline() to read skiplist file
fsck: add a performance test for skipList
fsck: add a performance test
fsck: document that skipList input must be unabbreviated
fsck: document and test commented & empty line skipList input
fsck: document and test sorted skipList input
fsck tests: add a test for no skipList input
fsck tests: setup of bogus commit object
Create a performance test to see how the skipList implementation
performs. First we setup N bad commits, then we see how progressively
working our way up to 0..N in increments of 10x does. I.e. the
needle(s) in the haystack get progressively more numerous.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a plain performance test for "fsck". This test will not be used to
/ referred to in any upcoming commit of mine in this series, but
having a simple test for fsck performance is valuable, so let's add it
while we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A server with bitmapped packs can serve a clone very
quickly. However, fetches are not necessarily made any
faster, because we spend a lot less time in object traversal
(which is what bitmaps help with) and more time finding
deltas (because we may have to throw out on-disk deltas if
the client does not have the base).
As a first step to making this faster, this patch introduces
a new perf script to measure fetches into a repo of various
ages from a fully-bitmapped server.
We separately measure the work done by the server (in
pack-objects) and that done by the client (in index-pack).
Furthermore, we measure the size of the resulting pack.
Breaking it down like this (instead of just doing a regular
"git fetch") lets us see how much each side benefits from
any changes. And since we know the pack size, if we estimate
the network speed, then one could calculate a complete
wall-clock time for the operation (though the script does
not do this automatically).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main objective of scripts in the perf framework is to
run "test_perf", which measures the time it takes to run
some operation. However, it can also be interesting to see
the change in the output size of certain operations.
This patch introduces test_size, which records a single
numeric output from the test and shows it in the aggregated
output (with pretty printing and relative size comparison).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will let us reuse the code when we add new values to
aggregate besides times.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
About half of test_perf() is boilerplate preparing to run
_any_ test, and the other half is specifically running a
timing test. Let's split it into two functions, so that we
can reuse the boilerplate in future commits.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When bisecting a performance regression using a config file,
`./bisect_regression --config my_perf.conf` for example, the
config file can contain Codespeed configuration which would
instruct the 'aggregate.perl' script called by the 'run'
script to output results in the Codespeed format and maybe
to try to send this output to a Codespeed server.
This is unfortunate because the 'bisect_run_script' relies
on the regular output from 'aggregate.perl' to mesure
performance, so let's disable Codespeed output and sending
results to a Codespeed server.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing an option '--foo' that it does not recognize, the
aggregate.perl script should die with an helpful error message
like:
Unknown option: foo
./aggregate.perl [options] [--] [<dir_or_rev>...] [--] \
[<test_script>...] >
Options:
--codespeed * Format output for Codespeed
--reponame <str> * Send given reponame to codespeed
--sort-by <str> * Sort output (only "regression" \
criteria is supported)
rather than:
fatal: Needed a single revision
rev-parse --verify --foo: command returned error: 128
To implement that let's use Getopt::Long for option parsing
instead of the current manual and sloppy parsing. This should
save some code and make option parsing simpler, tighter and
safer.
This will avoid something like 'foo--sort-by=regression' to
be handled as if '--sort-by=regression' had been used, for
example.
As Getopt::Long eats '--' at the end of options, this changes
a bit the way '--' is handled as we can now have '--' both
after the options and before the scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new bisect_regression script can be used to automatically bisect
performance regressions. It will pass the new bisect_run_script to
`git bisect run`.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option makes it possible to run perf tests as defined
in only one subsection of a config file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Small test-helper programs have been consolidated into a single
binary.
* nd/combined-test-helper: (36 commits)
t/helper: merge test-write-cache into test-tool
t/helper: merge test-wildmatch into test-tool
t/helper: merge test-urlmatch-normalization into test-tool
t/helper: merge test-subprocess into test-tool
t/helper: merge test-submodule-config into test-tool
t/helper: merge test-string-list into test-tool
t/helper: merge test-strcmp-offset into test-tool
t/helper: merge test-sigchain into test-tool
t/helper: merge test-sha1-array into test-tool
t/helper: merge test-scrap-cache-tree into test-tool
t/helper: merge test-run-command into test-tool
t/helper: merge test-revision-walking into test-tool
t/helper: merge test-regex into test-tool
t/helper: merge test-ref-store into test-tool
t/helper: merge test-read-cache into test-tool
t/helper: merge test-prio-queue into test-tool
t/helper: merge test-path-utils into test-tool
t/helper: merge test-online-cpus into test-tool
t/helper: merge test-mktemp into test-tool
t/helper: merge (unused) test-mergesort into test-tool
...
One of the most interesting thing one can be interested in when
looking at performance test results is possible performance
regressions.
This new option makes it easy to spot such possible regressions.
This new option is named '--sort-by=regression' to make it
possible and easy to add other ways to sort the results, like for
example '--sort-by=utime'.
If we would like to sort according to how much the stime regressed
we could also add a new option called '--sort-by=regression:stime'.
Then '--sort-by=regression' could become a synonym for
'--sort-by=regression:rtime'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new helper function will be reused in a subsequent
commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9ba95ed23c (perf/run: update get_var_from_env_or_config() for
subsections) stopped setting a default value for GIT_PERF_REPEAT_COUNT
if no perf config file is present, because get_var_from_env_or_config
returns early in that case.
Fix it by setting the default value after calling this function. Its
fifth parameter is not used for any other variable, so remove the
associated code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build procedure for perl/ part has been greatly simplified by
weaning ourselves off of MakeMaker.
* ab/simplify-perl-makefile:
perl: treat PERLLIB_EXTRA as an extra path again
perl: avoid *.pmc and fix Error.pm further
Makefile: replace perl/Makefile.PL with simple make rules
It is much easier to diff the output against a previous
one when the fields are sorted.
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to use the aggregate script
on the command line when one wants to get the
"environment" fields set in the codespeed output.
Previously setting GIT_REPO_NAME was needed
for this purpose.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to use the aggregate script
on the command line, to get results from
subsections.
Previously setting GIT_PERF_SUBSECTION was needed
for this purpose.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"perf" test output can be sent to codespeed server.
* cc/codespeed:
perf/run: read GIT_PERF_REPO_NAME from perf.repoName
perf/run: learn to send output to codespeed server
perf/run: learn about perf.codespeedOutput
perf/run: add conf_opts argument to get_var_from_env_or_config()
perf/aggregate: implement codespeed JSON output
perf/aggregate: refactor printing results
perf/aggregate: fix checking ENV{GIT_PERF_SUBSECTION}
The GIT_PERF_REPO_NAME env variable is used in
the `aggregate.perl` script to set the 'environment'
field in the JSON Codespeed output.
Let's make it easy to set this variable by setting it
in a config file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's make it possible to set in a config file the URL of
a codespeed server. And then let's make the `run` script
send the perf test results to this URL at the end of the
tests.
This should make is possible to easily automate the process
of running perf tests and having their results available in
Codespeed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's make it possible to set in a config file the output
format (regular or codespeed) of the perf tests.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's make it possible to use `git config` type specifiers like
`--int` or `--bool`, so that config values are converted to the
canonical form and easier to use.
This additional argument is now the fourth argument of
get_var_from_env_or_config() instead of the fifth because we
want the default value argument to be unset if it is not
passed, and this is simpler if it is the last argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codespeed (https://github.com/tobami/codespeed/) is an open source
project that can be used to track how some software performs over
time. It stores performance test results in a database and can show
nice graphs and charts on a web interface.
As it can be interesting to use Codespeed to see how Git performance
evolves over time and releases, let's implement a Codespeed output
in "perf/aggregate.perl".
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we want to implement another kind of output than
the current output for the perf test results, let's
refactor the existing code that outputs the results
in its own print_default_results() function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way we check ENV{GIT_PERF_SUBSECTION} could trigger
comparison between undef and "" that may be flagged by
use of strict & warnings. Let's fix that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since 5b594f457a ("Threaded grep", 2010-01-25) the number of
threads git-grep uses under PTHREADS has been hardcoded to 8, but
there's no performance test to check whether this is an optimal
setting.
Amend the existing tests for the grep engines to support a mode where
this can be tested, e.g.:
GIT_PERF_GREP_THREADS='1 8 16' GIT_PERF_LARGE_REPO=~/g/linux ./run p782*
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return code of command -v with a non-existing command is 1 in bash
and 127 in dash. Use that return code directly to allow the script to
work with dash and without watchman (e.g. on Debian).
While at it stop redirecting the output. stderr is redirected to
/dev/null by test_lazy_prereq already, and stdout can actually be
useful -- the path of the found watchman executable is sent there, but
it's shown only if the script was run with --verbose.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the perl/Makefile.PL and the fallback perl/Makefile used under
NO_PERL_MAKEMAKER=NoThanks with a much simpler implementation heavily
inspired by how the i18n infrastructure's build process works[1].
The reason for having the Makefile.PL in the first place is that it
was initially[2] building a perl C binding to interface with libgit,
this functionality, that was removed[3] before Git.pm ever made it to
the master branch.
We've since since started maintaining a fallback perl/Makefile, as
MakeMaker wouldn't work on some platforms[4]. That's just the tip of
the iceberg. We have the PM.stamp hack in the top-level Makefile[5] to
detect whether we need to regenerate the perl/perl.mak, which I fixed
just recently to deal with issues like the perl version changing from
under us[6].
There is absolutely no reason for why this needs to be so complex
anymore. All we're getting out of this elaborate Rube Goldberg machine
was copying perl/* to perl/blib/* as we do a string-replacement on
the *.pm files to hardcode @@LOCALEDIR@@ in the source, as well as
pod2man-ing Git.pm & friends.
So replace the whole thing with something that's pretty much a copy of
how we generate po/build/**.mo from po/*.po, just with a small sed(1)
command instead of msgfmt. As that's being done rename the files
from *.pm to *.pmc just to indicate that they're generated (see
"perldoc -f require").
While I'm at it, change the fallback for Error.pm from being something
where we'll ship our own Error.pm if one doesn't exist at build time
to one where we just use a Git::Error wrapper that'll always prefer
the system-wide Error.pm, only falling back to our own copy if it
really doesn't exist at runtime. It's now shipped as
Git::FromCPAN::Error, making it easy to add other modules to
Git::FromCPAN::* in the future if that's needed.
Functional changes:
* This will not always install into perl's idea of its global
"installsitelib". This only potentially matters for packagers that
need to expose Git.pm for non-git use, and as explained in the
INSTALL file there's a trivial workaround.
* The scripts themselves will 'use lib' the target directory, but if
INSTLIBDIR is set it overrides it. It doesn't have to be this way,
it could be set in addition to INSTLIBDIR, but my reading of [7] is
that this is the desired behavior.
* We don't build man pages for all of the perl modules as we used to,
only Git(3pm). As discussed on-list[8] that we were building
installed manpages for purely internal APIs like Git::I18N or
private-Error.pm was always a bug anyway, and all the Git::SVN::*
ones say they're internal APIs.
There are apparently external users of Git.pm, but I don't expect
there to be any of the others.
As a side-effect of these general changes the perl documentation
now only installed by install-{doc,man}, not a mere "install" as
before.
1. 5e9637c629 ("i18n: add infrastructure for translating Git with
gettext", 2011-11-18)
2. b1edc53d06 ("Introduce Git.pm (v4)", 2006-06-24)
3. 18b0fc1ce1 ("Git.pm: Kill Git.xs for now", 2006-09-23)
4. f848718a69 ("Make perl/ build procedure ActiveState friendly.",
2006-12-04)
5. ee9be06770 ("perl: detect new files in MakeMaker builds",
2012-07-27)
6. c59c4939c2 ("perl: regenerate perl.mak if perl -V changes",
2017-03-29)
7. 0386dd37b1 ("Makefile: add PERLLIB_EXTRA variable that adds to
default perl path", 2013-11-15)
8. 87bmjjv1pu.fsf@evledraar.booking.com ("Re: [PATCH] Makefile:
replace perl/Makefile.PL with simple make rules"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internaly we use 0{40} as a placeholder object name to signal the
codepath that there is no such object (e.g. the fast-forward check
while "git fetch" stores a new remote-tracking ref says "we know
there is no 'old' thing pointed at by the ref, as we are creating
it anew" by passing 0{40} for the 'old' side), and expect that a
codepath to locate an in-core object to return NULL as a sign that
the object does not exist. A look-up for an object that does not
exist however is quite costly with a repository with large number
of packfiles. This access pattern has been optimized.
* jk/fewer-pack-rescan:
sha1_file: fast-path null sha1 as a missing object
everything_local: use "quick" object existence check
p5551: add a script to test fetch pack-dir rescans
t/perf/lib-pack: use fast-import checkpoint to create packs
p5550: factor out nonsense-pack creation
* cc/perf-run-config:
perf: store subsection results in "test-results/$GIT_PERF_SUBSECTION/"
perf/run: show name of rev being built
perf/run: add run_subsection()
perf/run: update get_var_from_env_or_config() for subsections
perf/run: add get_subsections()
perf/run: add calls to get_var_from_env_or_config()
perf/run: add GIT_PERF_DIRS_OR_REVS
perf/run: add get_var_from_env_or_config()
perf/run: add '--config' option to the 'run' script
Replace use of strbuf_addf() with strbuf_add() when enumerating
loose objects in for_each_file_in_obj_subdir(). Since we already
check the length and hex-values of the string before consuming
the path, we can prevent extra computation by using the lower-
level method.
One consumer of for_each_file_in_obj_subdir() is the abbreviation
code. OID abbreviations use a cached list of loose objects (per
object subdirectory) to make repeated queries fast, but there is
significant cache load time when there are many loose objects.
Most repositories do not have many loose objects before repacking,
but in the GVFS case the repos can grow to have millions of loose
objects. Profiling 'git log' performance in GitForWindows on a
GVFS-enabled repo with ~2.5 million loose objects revealed 12% of
the CPU time was spent in strbuf_addf().
Add a new performance test to p4211-line-log.sh that is more
sensitive to this cache-loading. By limiting to 1000 commits, we
more closely resemble user wait time when reading history into a
pager.
For a copy of the Linux repo with two ~512 MB packfiles and ~572K
loose objects, running 'git log --oneline --parents --raw -1000'
had the following performance:
HEAD~1 HEAD
----------------------------------------
7.70(7.15+0.54) 7.44(7.09+0.29) -3.4%
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
Since fetch often deals with object-ids we don't have (yet),
it's an easy mistake for it to use a function like
parse_object() that gives the correct result (e.g., NULL)
but does so very slowly (because after failing to find the
object, we re-scan the pack directory looking for new
packs).
The regular test suite won't catch this because the end
result is correct, but we would want to know about
performance regressions, too. Let's add a test to the
regression suite.
Note that this uses a synthetic repository that has a large
number of packs. That's not ideal, as it means we're not
testing what "normal" users see (in fact, some of these
problems have existed for ages without anybody noticing
simply because a rescan on a normal repository just isn't
that expensive).
So what we're really looking for here is the spike you'd
notice in a pathological case (a lot of unknown objects
coming into a repo with a lot of packs). If that's fast,
then the normal cases should be, too.
Note that the test also makes liberal use of $MODERN_GIT for
setup; some of these regressions go back a ways, and we
should be able to use it to find the problems there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently use fast-import only to create a large number
of objects, and then run O(n) invocations of pack-objects to
turn them into packs.
We can do this faster by just asking fast-import to
checkpoint and create a pack for each (after telling it
not to turn loose tiny packs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
