When completing refs, several __git_refs() code paths list all the
refs from the refs/{heads,tags,remotes}/ hierarchy and then
__gitcomp_nl() iterates over those refs in a shell loop to filter out
refs not matching the current ref to be completed. This comes with a
considerable performance penalty when a repository contains a lot of
refs but the current ref can be uniquely completed or when only a
handful of refs match the current ref.
Reduce the number of iterations in __gitcomp_nl() from the number of
refs to the number of matching refs by specifying appropriate globbing
patterns to 'git for-each-ref' and 'git ls-remote' to list only those
refs that match the current ref to be completed. However, do so only
when the ref to match is explicitly given as parameter, because the
current word on the command line might contain a prefix like
'--option=' or 'branch..'. The __git_complete_refs() and
__git_complete_fetch_refspecs() helpers introduced previously in this
patch series already call __git_refs() specifying this current ref
parameter, so all their callsites, i.e. all places in the completion
script doing refs completion, can benefit from this optimization.
Furthermore, list only those symbolic and pseudo refs that match the
current ref to be completed. Though it doesn't matter at all in
itself performance-wise, it will allow us further significant
optimizations later in this series.
This speeds up refs completion considerably when there are a lot of
non-matching refs to be filtered out. Uniquely completing a branch in
a repository with 100k local branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --cur=maste
real 0m0.831s
user 0m0.808s
sys 0m0.028s
After:
real 0m0.119s
user 0m0.104s
sys 0m0.008s
On Windows, before:
real 0m1.480s
user 0m1.031s
sys 0m0.060s
After:
real 0m0.377s
user 0m0.015s
sys 0m0.030s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 49416ad22 (completion: support excluding refs, 2016-08-24) made
possible to complete short refs with a '^' prefix.
Extend the support to full refs to make completing '^refs/...' work.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 'git fetch <remote> <TAB>' our completion script offers refspecs
that will fetch to a local branch with the same name as in the remote
repository, e.g. 'master:master'. This also completes
non-fast-forward refspecs, i.e. after a '+' prefix like
'+master:master', and fully qualified refspecs, e.g.
'refs/heads/master:refs/heads/master'. However, it does not complete
non-fast-forward fully qualified refspecs (or fully qualified refspecs
following any other prefix, e.g. '--option=', though currently no git
command supports such an option, but third party git commands might).
These refspecs are listed by the __git_refs2() function, which is just
a thin wrapper iterating over __git_refs()'s output, turning each
listed ref into a refspec. Now, it's certainly possible to modify
__git_refs2() and its callsite to pass an extra parameter containing
only the ref part of the current word to be completed (to follow suit
of the previous commit) to deal with prefixed fully qualified refspecs
as well. Unfortunately, keeping the current behavior unchanged in the
"no extra parameter" case brings in a bit of subtlety, which makes the
resulting code ugly and compelled me to write a 8-line long comment in
the proof of concept. Not good. However, since the callsite has to
be modified for proper functioning anyway, we might as well leave
__git_refs2() as is and introduce a new helper function without
backwards compatibility concerns.
Add the new function __git_complete_fetch_refspecs() that has all the
necessary parameters to do the right thing in all cases mentioned
above, including non-fast-forward fully qualified refspecs. This new
function can also easier benefit from optimizations coming later in
this patch series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completing full refs currently only works when the full ref stands on
in its own on the command line, but doesn't work when the current word
to be completed contains a prefix before the full ref, e.g.
'--option=refs/<TAB>' or 'master..refs/bis<TAB>'.
The reason is that __git_refs() looks at the current word to be
completed ($cur) as a whole to decide whether it has to list full (if
it starts with 'refs/') or short refs (otherwise). However, $cur also
holds said '--option=' or 'master..' prefixes, which of course throw
off this decision. Luckily, the default action is to list short refs,
that's why completing short refs happens to work even after a
'master..<TAB>' prefix and similar cases.
Pass only the ref part of the current word to be completed to
__git_refs() as a new positional parameter, so it can make the right
decision even if the whole current word contains some kind of a
prefix.
Make this new parameter the 4. positional parameter and leave the 3.
as an ignored placeholder for now (it will be used later in this patch
series).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_refs() currently accepts two optional positional parameters: a
remote and a flag for 'git checkout's tracking DWIMery. To fix a
minor bug, and, more importantly, for faster refs completion, this
series will add three more parameters: a prefix, the current word to
be completed and a suffix, i.e. the options accepted by __gitcomp() &
friends, and will change __git_refs() to list only refs matching that
given current word and to add that given prefix and suffix to the
listed refs.
However, __git_refs() is the helper function that is most likely used
in users' custom completion scriptlets for their own git commands, and
we don't want to break those, so
- we can't change __git_refs()'s default output format, i.e. we
can't by default append a trailing space to every listed ref,
meaning that the suffix parameter containing the default trailing
space would have to be specified on every invocation, and
- we can't change the position of existing positional parameters
either, so there would have to be plenty of set-but-empty
placeholder positional parameters all over the completion script.
Furthermore, with five positional parameters it would be really hard
to remember which position means what.
To keep callsites simple, add the new wrapper function
__git_complete_refs() around __git_refs(), which:
- instead of positional parameters accepts real '--opt=val'-style
options and with minimalistic option parsing translates them to
__git_refs()'s and __gitcomp_nl()'s positional parameters, and
- includes the '__gitcomp_nl "$(__git_refs ...)" ...' command
substitution to make its behavior match its name and the behavior
of other __git_complete_* functions, and to limit future changes
in this series to __git_refs() and this new wrapper function.
Call this wrapper function instead of __git_refs() wherever possible
throughout the completion script, i.e. when __git_refs()'s output is
fed to __gitcomp_nl() right away without further processing, which
means all callsites except a single one in the __git_refs2() helper.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the previous changes in this series there are only a handful of
$(__gitdir) command substitutions left in the completion script, but
there is still a bit of room for improvements:
1. The command substitution involves the forking of a subshell,
which has considerable overhead on some platforms.
2. There are a few cases, where this command substitution is
executed more than once during a single completion, which means
multiple subshells and possibly multiple 'git rev-parse'
executions. __gitdir() is invoked twice while completing refs
for e.g. 'git log', 'git rebase', 'gitk', or while completing
remote refs for 'git fetch' or 'git push'.
Both of these points can be addressed by using the
__git_find_repo_path() helper function introduced in the previous
commit:
1. __git_find_repo_path() stores the path to the repository in a
variable instead of printing it, so the command substitution
around the function can be avoided. Or rather: the command
substitution should be avoided to make the new value of the
variable set inside the function visible to the callers.
(Yes, there is now a command substitution inside
__git_find_repo_path() around each 'git rev-parse', but that's
executed only if necessary, and only once per completion, see
point 2. below.)
2. $__git_repo_path, the variable holding the path to the
repository, is declared local in the toplevel completion
functions __git_main() and __gitk_main(). Thus, once set, the
path is visible in all completion functions, including all
subsequent calls to __git_find_repo_path(), meaning that they
wouldn't have to re-discover the path to the repository.
So call __git_find_repo_path() and use $__git_repo_path instead of the
$(__gitdir) command substitution to access paths in the .git
directory. Turn tests checking __gitdir()'s repository discovery into
tests of __git_find_repo_path() such that only the tested function
changes but the expected results don't, ensuring that repo discovery
keeps working as it did before.
As __gitdir() is not used anymore in the completion script, mark it as
deprecated and direct users' attention to __git_find_repo_path() and
$__git_repo_path. Yet keep four __gitdir() tests to ensure that it
handles success and failure of __git_find_repo_path() and that it
still handles its optional remote argument, because users' custom
completion scriptlets might depend on it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for caching the path to the repository in the following
commit, extract the repository discovering part of __gitdir() into the
__git_find_repo_path() helper function, which stores the found path in
the $__git_repo_path variable instead of printing it. Make __gitdir()
a wrapper around this new function. Declare $__git_repo_path local in
the toplevel completion functions __git_main() and __gitk_main() to
ensure that it never leaks into the environment and influences
subsequent completions (though this isn't necessary right now, as
__gitdir() is still only executed in subshells, but will matter for
the following commit).
Adjust tests checking __gitdir() or any other completion function
calling __gitdir() to perform those checks in a subshell to prevent
$__git_repo_path from leaking into the test environment. Otherwise
leave the tests unchanged to demonstrate that this change doesn't
alter __gitdir()'s behavior.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git -C <path>' option(s) on the command line should be taken into
account during completion, because
- like '--git-dir=<path>', it can lead us to a different repository,
- a few git commands executed in the completion script do care about
in which directory they are executed, and
- the command for which we are providing completion might care about
in which directory it will be executed.
However, unlike '--git-dir=<path>', the '-C <path>' option can be
specified multiple times and their effect is cumulative, so we can't
just store a single '<path>' in a variable. Nor can we simply
concatenate a path from '-C <path1> -C <path2> ...', because e.g. (in
an arguably pathological corner case) a relative path might be
followed by an absolute path.
Instead, store all '-C <path>' options word by word in the
$__git_C_args array in the main git completion function, and pass this
array, if present, to 'git rev-parse --absolute-git-dir' when
discovering the repository in __gitdir(), and let it take care of
multiple options, relative paths, absolute paths and everything.
Also pass all '-C <path> options via the $__git_C_args array to those
git executions which require a worktree and for which it matters from
which directory they are executed from. There are only three such
cases:
- 'git diff-index' and 'git ls-files' in __git_ls_files_helper()
used for git-aware filename completion, and
- the 'git ls-tree' used for completing the 'ref:path' notation.
The other git commands executed in the completion script don't need
these '-C <path>' options, because __gitdir() already took those
options into account. It would not hurt them, either, but let's not
induce unnecessary code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main completion function finds the name of the git command by
iterating through all the words on the command line in search for the
first non-option-looking word. As it is not aware of 'git -C's
mandatory path argument, if the '-C <path>' option is present, 'path'
will be the first such word and it will be mistaken for a git command.
This breaks completion in various ways:
- If 'path' happens to match one of the commands supported by the
completion script, then options of that command will be offered.
- If 'path' doesn't match a supported command and doesn't contain any
characters not allowed in Bash identifier names, then the
completion script does basically nothing and Bash in turn falls
back to filename completion for all subsequent words.
- Otherwise, if 'path' does contain such an unallowed character, then
it leads to a more or less ugly error message in the middle of the
command line. The standard '/' directory separator is such a
character, and it happens to trigger one of the uglier errors:
$ git -C some/path <TAB>sh.exe": declare: `_git_some/path': not a valid identifier
error: invalid key: alias.some/path
Fix this by skipping 'git -C's mandatory path argument while iterating
over the words on the command line. Extend the relevant test with
this case and, while at it, with cases that needed similar treatment
in the past ('--git-dir', '-c', '--work-tree' and '--namespace').
Additionally, silence the standard error of the 'declare' builtins
looking for the completion function associated with the git command
and of the 'git config' query for the aliased command. So if git ever
learns a new option with a mandatory argument in the future, then,
though the completion script will again misbehave, at least the
command line will not be utterly disrupted by those error messages.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e832f5c096 (completion: avoid ls-remote in certain scenarios,
2013-05-28) turned a 'git ls-remote <remote>' query into a 'git
for-each-ref refs/remotes/<remote>/' to improve responsiveness of
remote refs completion by avoiding potential network communication.
However, it inadvertently made impossible to complete short refs from
a remote given as a URL, e.g. 'git fetch git://server.com/repo.git
<TAB>', because there is, of course, no such thing as
'refs/remotes/git://server.com/repo.git'.
Since the previous commit we tell apart configured remotes, i.e. those
that can have a hierarchy under 'refs/remotes/', from others that
don't, including remotes given as URL, so we know when we can't use
the faster 'git for-each-ref'-based approach.
Resurrect the old, pre-e832f5c09680 'git ls-remote'-based code for the
latter case to support listing short refs from remotes given as a URL.
The code is slightly updated from the original to
- take into account the path to the repository given on the command
line (if any), and
- omit 'ORIG_HEAD' from the query, as 'git ls-remote' will never
list it anyway.
When the remote given to __git_refs() doesn't exist, then it will be
handled by this resurrected 'git ls-remote' query. This code path
doesn't list 'HEAD' unconditionally, which has the nice side effect of
fixing two more expected test failures.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When refs completion is attempted while not in a git repository, the
completion script offers 'HEAD' erroneously.
Check early in __git_refs() that there is either a repository or a
remote to work on, and return early if neither is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote given to __git_refs() happens to match both the name of
a configured remote and the name of a directory in the current working
directory, then that directory is assumed to be a git repository, and
listing refs from that directory will be attempted. This is wrong,
because in such a situation git commands (e.g. 'git fetch|pull|push
<remote>' whom these refs will eventually be passed to) give
precedence to the configured remote. Therefore, __git_refs() should
list refs from the configured remote as well.
Add the helper function __git_is_configured_remote() that checks
whether its argument matches the name of a configured remote. Use
this helper to decide how to handle the remote passed to __git_refs().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In __git_refs() the git commands listing refs, both short and full,
from a given remote repository are run without giving them the path to
the git repository which might have been specified on the command line
via 'git --git-dir=<path>'. This is bad, those git commands should
access the 'refs/remotes/<remote>/' hierarchy or the remote and
credentials configuration in that specified repository.
Use the __gitdir() helper only to find the path to the .git directory
and pass the resulting path to the 'git ls-remote' and 'for-each-ref'
executions that list remote refs. While modifying that 'for-each-ref'
line, remove the superfluous disambiguating doubledash.
Don't use __gitdir() to check that the given remote is on the file
system: basically it performs only a single if statement for us at the
considerable cost of fork()ing a subshell for a command substitution.
We are better off to perform all the necessary checks of the remote in
__git_refs().
Though __git_refs() was the last remaining callsite that passed a
remote to __gitdir(), don't delete __gitdir()'s remote-handling part
yet, just in case some users' custom completion scriptlets depend on
it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir() helper function prints the path to the git repository
to its stdout or stays silent and returns with error when it can't
find a repository or when the repository given via $GIT_DIR doesn't
exist.
This is not the case, however, when the path in $__git_dir, i.e. the
path to the repository specified on the command line via 'git
--git-dir=<path>', doesn't exist: __gitdir() still outputs it as if it
were a real existing repository, making some completion functions
believe that they operate on an existing repository.
Check that the path in $__git_dir exists and return with error without
printing anything to stdout if it doesn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check how __git_refs() lists refs in different scenarios, i.e.
- short and full refs,
- from a local or from a remote repository,
- remote specified via path, name or URL,
- with or without a repository specified on the command line,
- non-existing remote,
- unique remote branches for 'git checkout's tracking DWIMery,
- not in a git repository, and
- interesting combinations of the above.
Seven of these tests expect failure, mostly demonstrating bugs related
to listing refs from a remote repository:
- ignoring the repository specified on the command line (2 tests),
- listing refs from the wrong place when the name of a configured
remote happens to match a directory,
- listing only 'HEAD' but no short refs from a remote given as URL,
- listing 'HEAD' even from non-existing remotes (2 tests), and
- listing 'HEAD' when not in a repository.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir() helper function shouldn't output anything if not in a
git repository. The relevant tests only checked its error code, so
extend them to ensure that there's no output.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests of the __gitdir() helper function use the $TRASH_DIRECTORY
variable in direct path comparisons. In general this should be
avoided, because it might contain symbolic links. There happens to be
no issues with this here, however, because those tests use
$TRASH_DIRECTORY both for specifying the expected result and for
specifying input which in turn is just 'echo'ed verbatim.
Other __gitdir() tests ask for the path of the trash directory by
running $(pwd -P) in each test, sometimes even twice in a single test.
Run $(pwd) only once at the beginning of the test script to store the
path of the trash directory in a variable, and use that variable in
all __gitdir() tests.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test helper functions test_gitcomp() and test_gitcomp_nl() leak
the $cur variable into the test environment. Since this variable has
a special role in the Bash completion script (it holds the word
currently being completed) it influences the behavior of most
completion functions and thus this leakage could interfere with
subsequent tests. Although there are no such issues in the current
tests, early versions of the new tests that will be added later in
this series suffered because of this.
It's better to play safe and declare $cur local in those test helper
functions. 'local' is bashism, of course, but the tests of the Bash
completion script are run under Bash anyway, and there are already
other variables declared local in this test script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While preparing commits, three tests added newly created files to the
index using 'git add .', which added not only the files in question
but leftover test cruft from previous tests like the files 'expected'
and 'actual' as well. Luckily, this had no effect on the tests'
correctness.
Add only the files we are actually interested in.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests want to run a command outside of any git repo;
with the nongit() function this is now a one-liner. It saves
a few lines, but more importantly, it's immediately obvious
what the code is trying to accomplish.
This doesn't convert every such case in the test suite; it
just covers those that want to do a one-off command. Other
cases, such as the ones in t4035, are part of a larger
scheme of outside-repo files, and it's less confusing for
them to stay consistent with the surrounding tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To get the name of all config variables in a given section we perform a
'git config --get-regex' query for all config variables containing the
name of that section, and then filter its output through a case statement
to throw away those that though contain but don't start with the given
section.
Modify the regex to match only at the beginning, so the case statement
becomes unnecessary and we can get rid of it. Add a test to check that a
match in the middle doesn't fool us.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently there are a few completion functions that perform similar 'git
config' queries and filtering to get config variable names: the completion
of pretty aliases, aliases, and remote groups for 'git remote update'.
Unify those 'git config' queries in a helper function to eliminate code
duplication.
Though the helper functions to get pretty aliases and alieses are reduced
to mere one-liner wrappers around the newly added function, keep these
helpers still, because users' completion functions out there might depend
on them. And they keep their callers a tad easier to read, too.
Add tests for the pretty alias and alias helper to show that they work
as before; not for the remote groups query, though, because that's not
extracted into a helper function and it's not worth the effort to do so
for a sole callsite.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
in a location which causes a significant portion of the test
to be missed (e.g., the test effectively does nothing, or
consists of a long string of actions and output comparisons,
and we throw away the exit code of at least one part of the
string).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test checks that both remotes under '$GIT_DIR/remotes' and remotes
in the config file are listed.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path in a .git platform independent link file needs to be absolute
and under mingw we need it to be a windows type path, not a unix style
path so it should start with a drive letter and not a /.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'!f() { ... }; f' and "!sh -c '....' -" are recommended patterns for
declaring more complex aliases (see git wiki [1]). This commit teaches
the completion to handle them.
When determining which completion to use for an alias, an opening brace
or single quote is now skipped, and the search for a git command is
continued. For example, the aliases '!f() { git commit ... }' or "!sh
-c 'git commit ...'" now trigger commit completion. Previously, the
search stopped on the opening brace or quote, and the completion tried
it to determine how to complete, which obviously was useless.
The null command ':' is now skipped, so that it can be used as
a workaround to declare the desired completion style.
For example, the aliases
!f() { : git commit ; if ... } f
!sh -c ': git commit; if ...' -
now trigger commit completion.
Shell function declarations now work with or without space before
the parens, i.e. '!f() ...' and '!f () ...' both work.
[1] https://git.wiki.kernel.org/index.php/Aliases
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Old Bash (3.0) which is distributed with RHEL 4.X and other ancient
platforms that are still in wide use, does not understand the
array+=() notation. Let's use an explicit assignment to the new array
element which works everywhere, like:
array[${#array[@]}+1]=''
The right-hand side '' is not strictly necessary, but in this case
I think it is more clear.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The == operator as an alias to = is not POSIX. This doesn't actually
matter for the execution of the script, because it only runs when the
shell is bash. However, it trips up test-lint, so it's nicer to use
the standard form.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently __gitdir() is duplicated in the git completion and prompt
scripts, while its tests are in the prompt test suite. This patch
series is about to change __git_ps1() in a way that it won't need
__gitdir() anymore and __gitdir() will be removed from the prompt
script.
So move all __gitdir() tests from the prompt test suite over to the
completion test suite. Update the setup tests so that they perform
only those steps that are necessary for each test suite.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
The commit fea16b4 (git-completion.bash: add support for path
completion) introduced quite a few changes, without the usual tests.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality we use from compgen is not much, we can do the same
manually, with drastic improvements in speed, especially when dealing
with only a few words.
This patch also has the sideffect that brekage reported by Jeroen Meijer
and SZEDER Gábor gets fixed because we no longer expand the resulting
words.
Here are some numbers filtering N amount of words:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.000s
== 100 ==
original: 0.003s
new: 0.002s
== 1000 ==
original: 0.012s
new: 0.011s
== 10000 ==
original: 0.056s
new: 0.066s
== 100000 ==
original: 2.669s
new: 0.622s
If the results are not narrowed:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.001s
== 100 ==
original: 0.004s
new: 0.004s
== 1000 ==
original: 0.020s
new: 0.015s
== 10000 ==
original: 0.101s
new: 0.355s
== 100000 ==
original: 2.850s
new: 31.941s
So, unless 'git checkout <tab>' usually gives you more than 10000
results, you'll get an improvement :)
Other possible solutions perform better after 1000 words, but worst if
less than that:
COMPREPLY=($(awk -v cur="$3" -v pre="$2" -v suf="$4"
'$0 ~ cur { print pre$0suf }' <<< "$1" ))
COMPREPLY=($(printf -- "$2%s$4\n" $1 | grep "^$2$3"))
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of passing a dummy "", let's check if the last character is a
space, and then move the _cword accordingly.
Apparently we were passing "" all the way to compgen, which fortunately
expanded it to nothing.
Lets do the right thing though.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have random build artifacts in your build directory, left
behind by running "make" while on another branch, the "git help -a"
command run by __git_list_all_commands in the completion script that
is being tested does not have a way to know that they are not part
of the subcommands this build will ship. Such extra subcommands may
come from the user's $PATH. They will interfere with the tests that
expect a certain prefix to uniquely expand to a known completion.
Instrument the completion script and give it a way for us to tell
what (subset of) subcommands we are going to ship.
Also add a test to "git --help <prefix><TAB>" expansion. It needs
to show not just commands but some selected documentation pages.
Based on an idea by Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean up completion tests. Use of conslidated helper may make
instrumenting one particular test during debugging of the test
itself, but I think that issue should be addressed in some other
way (e.g. making sure individual tests in 9902 can be skipped).
* fc/completion-test-simplification:
completion: simplify __gitcomp() test helper
completion: refactor __gitcomp related tests
completion: consolidate test_completion*() tests
completion: simplify tests using test_completion_long()
completion: standardize final space marker in tests
completion: add comment for test_completion()
By using print_comp as suggested by SZEDER Gábor.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove lots of duplicated code; no functional changes intended.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to have two versions; if a second argument is specified, use
that, otherwise use stdin.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to duplicate that functionality.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rest of the code uses ' Z$'. Lets use that for
test_completion_long() as well.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that it's easier to understand what it does.
Also, make sure we pass only the first argument for completion.
Shouldn't cause any functional changes because run_completion only
checks $1.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We correctly handle completion items with spaces just fine,
since we pass the lists around with newline delimiters.
However, we do not handle filenames with shell
metacharacters, as "compgen -W" performs expansion on the
list we give it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were not testing ref or tree completion at all. Let's
give them even basic sanity checks to avoid regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split a rather heavy-ish "git completion" script out to create a
separate "git prompting" script, to help lazy-autoloading of the
completion part while making prompting part always available.
Commit 7f02f3d7 (completion: rename internal helpers _git and _gitk,
2012-05-19) renamed said functions to _main_git() and _main_gitk(),
respectively. By convention the name of our git-completion-specific
functions start with '_git' or '__git' prefix, so rename those
functions once again to put them back into our "namespace". Use the
two underscore prefix, because _git_main() could be mistaken for the
completion function of the (not yet existing) 'git main' command.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
