Commit afda36dbf3 ("git-prompt: include sparsity state as well",
2020-06-21) added the use of some variables to control how to show
sparsity state in the git prompt, but implicitly assumed that undefined
variables would be treated as the empty string. This breaks users who
run under 'set -u'; fix the code to be more explicit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git subtree" updates.
* ls/subtree: (30 commits)
subtree: be stricter about validating flags
subtree: push: allow specifying a local rev other than HEAD
subtree: allow 'split' flags to be passed to 'push'
subtree: allow --squash to be used with --rejoin
subtree: give the docs a once-over
subtree: have $indent actually affect indentation
subtree: don't let debug and progress output clash
subtree: add comments and sanity checks
subtree: remove duplicate check
subtree: parse revs in individual cmd_ functions
subtree: use "^{commit}" instead of "^0"
subtree: don't fuss with PATH
subtree: use "$*" instead of "$@" as appropriate
subtree: use more explicit variable names for cmdline args
subtree: use git-sh-setup's `say`
subtree: use `git merge-base --is-ancestor`
subtree: drop support for git < 1.7
subtree: more consistent error propagation
subtree: don't have loose code outside of a function
subtree: t7900: add porcelain tests for 'pull' and 'push'
...
In previous changes, mailinfo has learnt to process lines that decoded
from base64 or quoted-printable, and ends with CRLF.
Let's teach "am" that new trick, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Portability fix for command line completion script (in contrib/).
* si/zsh-complete-comment-fix:
work around zsh comment in __git_complete_worktree_paths
Further update the command line completion (in contrib/) for "git
stash".
* dl/complete-stash-updates:
git-completion.bash: consolidate cases in _git_stash()
git-completion.bash: use $__git_cmd_idx in more places
git-completion.bash: rename to $__git_cmd_idx
git-completion.bash: separate some commands onto their own line
The command line completion (in contrib/) for "git stash" has been
updated.
* dl/complete-stash:
git-completion.bash: use __gitcomp_builtin() in _git_stash()
git-completion.bash: extract from else in _git_stash()
git-completion.bash: pass $__git_subcommand_idx from __git_main()
[PATCH]: contrib/completion/git-completion.bash, there is a construct
where comment lines are placed between the command that is on
the upstream of a pipe and the command that is on the downstream
of a pipe in __git_complete_worktree_paths function.
Unfortunately, this script is also used by Zsh completion, but
Zsh mishandles this construct when "interactive_comments" option is not
set (by default it is off on macOS), resulting in a breakage:
$ git worktree remove [TAB]
$ git worktree remove __git_complete_worktree_paths:7: command not found: #
Move the comment, even though it explains what happens on the
downstream of the pipe and logically belongs where it is right
now, before the entire pipeline, to work around this problem.
Signed-off-by: Sardorbek Imomaliev <sardorbek.imomaliev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Effort to make the command line completion (in contrib/) safe with
"set -u" continues.
* vs/completion-with-set-u:
completion: avoid aliased command lookup error in nounset mode
Don't silently ignore a flag that's invalid for a given subcommand. The
user expected it to do something; we should tell the user that they are
mistaken, instead of surprising the user.
It could be argued that this change might break existing users. I'd
argue that those existing users are already broken, and they just don't
know it. Let them know that they're broken.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git subtree split' lets you specify a rev other than HEAD. 'git push'
lets you specify a mapping between a local thing and a remot ref. So
smash those together, and have 'git subtree push' let you specify which
local thing to run split on and push the result of that split to the
remote ref.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'push' does a 'split' internally, but it doesn't pass flags through to the
'split'. This is silly, if you need to pass flags to 'split', then it
means that you can't use 'push'!
So, have 'push' accept 'split' flags, and pass them through to 'split'.
Add tests for this by copying split's tests with minimal modification.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Besides being a genuinely useful thing to do, this also just makes sense
and harmonizes which flags may be used when. `git subtree split
--rejoin` amounts to "automatically go ahead and do a `git subtree
merge` after doing the main `git subtree split`", so it's weird and
arbitrary that you can't pass `--squash` to `git subtree split --rejoin`
like you can `git subtree merge`. It's weird that `git subtree split
--rejoin` inherits `git subtree merge`'s `--message` but not `--squash`.
Reconcile the situation by just having `split --rejoin` actually just
call `merge` internally (or call `add` instead, as appropriate), so it
can get access to the full `merge` behavior, including `--squash`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just went through the docs looking for anything inaccurate or that can
be improved.
In the '-h' text, in the man page synopsis, and in the man page
description: Normalize the ordering of the list of sub-commands: 'add',
'merge', 'split', 'pull', 'push'. This allows us to kinda separate the
lower-level add/merge/split from the higher-level pull/push.
'-h' text:
- correction: Indicate that split's arg is optional.
- clarity: Emphasize that 'pull' takes the 'add'/'merge' flags.
man page:
- correction: State that all subcommands take options (it seemed to
indicate that only 'split' takes any options other than '-P').
- correction: 'split' only guarantees that the results are identical if
the flags are identical.
- correction: The flag is named '--ignore-joins', not '--ignore-join'.
- completeness: Clarify that 'push' always operates on HEAD, and that
'split' operates on HEAD if no local commit is given.
- clarity: In the description, when listing commands, repeat what their
arguments are. This way the reader doesn't need to flip back and
forth between the command description and the synopsis and the full
description to understand what's being said.
- clarity: In the <variables> used to give command arguments, give
slightly longer, descriptive names. Like <local-commit> instead of
just <commit>.
- clarity: Emphasize that 'pull' takes the 'add'/'merge' flags.
- style: In the synopsis, list options before the subcommand. This
makes things line up and be much more readable when shown
non-monospace (such as in `make html`), and also more closely matches
other man pages (like `git-submodule.txt`).
- style: Use the correct syntax for indicating the options ([<options>]
instead of [OPTIONS]).
- style: In the synopsis, separate 'pull' and 'push' from the other
lower-level commands. I think this helps readability.
- style: Code-quote things in prose that seem like they should be
code-quoted, like '.gitmodules', flags, or full commands.
- style: Minor wording improvements, like more consistent mood (many
of the command descriptions start in the imperative mood and switch
to the indicative mode by the end). That sort of thing.
- style: Capitalize "ID".
- style: Remove the "This option is only valid for XXX command" remarks
from each option, and instead rely on the section headings.
- style: Since that line is getting edited anyway, switch "behaviour" to
American "behavior".
- style: Trim trailing whitespace.
`todo`:
- style: Trim trailing whitespace.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the $indent variable is just used to track how deeply we're
nested, and the debug log is indented by things like
debug " foo"
That is: The indentation-level is hard-coded. It used to be that the
code couldn't recurse, so the indentation level could be known
statically, so it made sense to just hard-code it in the
output. However, since 315a84f9aa ("subtree: use commits before rejoins
for splits", 2018-09-28), it can now recurse, and the debug log is
misleading.
So fix that. Indent according to $indent.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, debug output (triggered by passing '-d') and progress output
stomp on each other. The debug output is just streamed as lines to
stderr, and the progress output is sent to stderr as '%s\r'. When
writing to a file, it is awkward to read and difficult to distinguish
between the debug output and a progress line. When writing to a
terminal the debug lines hide progress lines.
So, when '-d' has been passed, spit out progress as 'progress: %s\n',
instead of as '%s\r', so that it can be detected, and so that the debug
lines don't overwrite the progress when written to a terminal.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For each function in subtree, add a usage comment saying what the
arguments are, and add an `assert` checking the number of arguments.
In figuring out each thing's arguments in order to write those comments
and assertions, it turns out that find_existing_splits is written as if
it takes multiple 'revs', but it is in fact only ever passed a single
'rev':
unrevs="$(find_existing_splits "$dir" "$rev")" || exit $?
So go ahead and codify that by documenting and asserting that it takes
exactly two arguments, one dir and one rev.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`cmd_add` starts with a check that the directory doesn't yet exist.
However, the `main` function performs the exact same check before
calling `cmd_add`. So remove the check from `cmd_add`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main argument parser goes ahead and tries to parse revs to make
things simpler for the sub-command implementations. But, it includes
enough special cases for different sub-commands. And it's difficult
having having to think about "is this info coming from an argument, or a
global variable?". So the main argument parser's effort to make things
"simpler" ends up just making it more confusing and complicated.
Begone with the 'revs' global variable; parse 'rev=$(...)' as needed in
individual 'cmd_*' functions.
Begone with the 'default' global variable. Its would-be value is
knowable just from which function we're in.
Begone with the 'ensure_single_rev' function. Its functionality can be
achieved by passing '--verify' to 'git rev-parse'.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are synonyms. Both are used in the file. ^{commit} is clearer, so
"standardize" on that.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts needing to fuss with with adding $(git --exec-prefix) PATH
before loading git-sh-setup is a thing of the past. As far as I can
tell, it's been a thing of the past since since Git v1.2.0 (2006-02-12),
or more specifically, since 77cb17e940 (Exec git programs without using
PATH, 2006-01-10). However, it stuck around in contrib scripts and in
third-party scripts for long enough that it wasn't unusual to see.
Originally `git subtree` didn't fuss with PATH, but when people
(including the original subtree author) had problems, because it was a
common thing to see, it seemed that having subtree fuss with PATH was a
reasonable solution.
Here is an abridged history of fussing with PATH in subtree:
2987e6add3 (Add explicit path of git installation by 'git --exec-path', Gianluca Pacchiella, 2009-08-20)
As pointed out by documentation, the correct use of 'git-sh-setup' is
using $(git --exec-path) to avoid problems with not standard
installations.
-. git-sh-setup
+. $(git --exec-path)/git-sh-setup
33aaa697a2 (Improve patch to use git --exec-path: add to PATH instead, Avery Pennarun, 2009-08-26)
If you (like me) are using a modified git straight out of its source
directory (ie. without installing), then --exec-path isn't actually correct.
Add it to the PATH instead, so if it is correct, it'll work, but if it's
not, we fall back to the previous behaviour.
-. $(git --exec-path)/git-sh-setup
+PATH=$(git --exec-path):$PATH
+. git-sh-setup
9c632ea29c ((Hopefully) fix PATH setting for msysgit, Avery Pennarun, 2010-06-24)
Reported by Evan Shaw. The problem is that $(git --exec-path) includes a
'git' binary which is incompatible with the one in /usr/bin; if you run it,
it gives you an error about libiconv2.dll.
+OPATH=$PATH
PATH=$(git --exec-path):$PATH
. git-sh-setup
+PATH=$OPATH # apparently needed for some versions of msysgit
df2302d774 (Another fix for PATH and msysgit, Avery Pennarun, 2010-06-24)
Evan Shaw tells me the previous fix didn't work. Let's use this one
instead, which he says does work.
This fix is kind of wrong because it will run the "correct" git-sh-setup
*after* the one in /usr/bin, if there is one, which could be weird if you
have multiple versions of git installed. But it works on my Linux and his
msysgit, so it's obviously better than what we had before.
-OPATH=$PATH
-PATH=$(git --exec-path):$PATH
+PATH=$PATH:$(git --exec-path)
. git-sh-setup
-PATH=$OPATH # apparently needed for some versions of msysgit
First of all, I disagree with Gianluca's reading of the documentation:
- I haven't gone back to read what the documentation said in 2009, but
in my reading of the 2021 documentation is that it includes "$(git
--exec-path)/" in the synopsis for illustrative purposes, not to say
it's the proper way.
- After being executed by `git`, the git exec path should be the very
first entry in PATH, so it shouldn't matter.
- None of the scripts that are part of git do it that way.
But secondly, the root reason for fussing with PATH seems to be that
Avery didn't know that he needs to set GIT_EXEC_PATH if he's going to
use git from the source directory without installing.
And finally, Evan's issue is clearly just a bug in msysgit. I assume
that msysgit has since fixed the issue, and also msysgit has been
deprecated for 6 years now, so let's drop the workaround for it.
So, remove the line fussing with PATH. However, since subtree *is* in
'contrib/' and it might get installed in funny ways by users
after-the-fact, add a sanity check to the top of the script, checking
that it is installed correctly.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"$*" is for when you want to concatenate the args together,
whitespace-separated; and "$@" is for when you want them to be separate
strings.
There are several places in subtree that erroneously use $@ when
concatenating args together into an error message.
For instance, if the args are argv[1]="dead" and argv[2]="beef", then
the line
die "You must provide exactly one revision. Got: '$@'"
surely intends to call 'die' with the argument
argv[1]="You must provide exactly one revision. Got: 'dead beef'"
however, because the line used $@ instead of $*, it will actually call
'die' with the arguments
argv[1]="You must provide exactly one revision. Got: 'dead"
argv[2]="beef'"
This isn't a big deal, because 'die' concatenates its arguments together
anyway (using "$*"). But that doesn't change the fact that it was a
mistake to use $@ instead of $*, even though in the end $@ still ended
up doing the right thing.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it painfully obvious when reading the code which variables are
direct parsings of command line arguments.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
subtree currently defines its own `say` implementation, rather than
using git-sh-setups's implementation. Change that, don't re-invent the
wheel.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of writing a slow `rev_is_descendant_of_branch $a $b` function
in shell, just use the fast `git merge-base --is-ancestor $b $a`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suport for Git versions older than 1.7.0 (older than February 2010) was
nice to have when git-subtree lived out-of-tree. But now that it lives
in git.git, it's not necessary to keep around. While it's technically
in contrib, with the standard 'git' packages for common systems
(including Arch Linux and macOS) including git-subtree, it seems
vanishingly likely to me that people are separately installing
git-subtree from git.git alongside an older 'git' install (although it
also seems vanishingly likely that people are still using >11 year old
git installs).
Not that there's much reason to remove it either, it's not much code,
and none of my changes depend on a newer git (to my knowledge, anyway;
I'm not actually testing against older git). I just figure it's an easy
piece of fat to trim, in the journey to making the whole thing easier to
hack on.
"Ignore space change" is probably helpful when viewing this diff.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure that every $(subshell) that calls a function (as opposed to an
external executable) is followed by `|| exit $?`. Similarly, ensure that
every `cmd | while read; do ... done` loop is followed by `|| exit $?`.
Both of those constructs mean that it can miss `die` calls, and keep
running when it shouldn't.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shove all of the loose code inside of a main() function.
This comes down to personal preference more than anything else. A
preference that I've developed over years of maintaining large Bash
scripts, but still a mere personal preference.
In this specific case, it's also moving the `set -- -h`, the `git
rev-parse --parseopt`, and the `. git-sh-setup` to be closer to all
the rest of the argument parsing, which is a readability win on its
own, IMO.
"Ignore space change" is probably helpful when viewing this diff.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'pull' and 'push' subcommands deserve their own sections in the tests.
Add some basic tests for them.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a dumb test, but it's surprisingly easy to break.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7900-subtree.sh defines a helper function named last_commit_message.
However, it only returns the subject line of the commit message, not the
entire commit message. So rename it, to make the name less confusing.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As far as I can tell, this test isn't actually testing anything, because
someone forgot to tack on `--name-only` to `git log`. This seems to
have been the case since the test was first written, back in fa16ab36ad
("test.sh: make sure no commit changes more than one file at a time.",
2009-04-26), unless `git log` used to do that by default and didn't need
the flag back then?
Convincing myself that it's not actually testing anything was tricky,
the code is a little hard to reason about. It can be made a lot simpler
if instead of trying to parse all of the info from a single `git log`,
we're OK calling `git log` from inside of a loop. And it's my opinion
that tests are not the place for clever optimized code.
So, fix and simplify the test, so that it's actually testing something
and is simpler to reason about.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7900-subtree.sh defines its own `check_equal A B` function, instead of
just using `test A = B` like all of the other tests. Don't be special,
get rid of `check_equal` in favor of `test`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unclear what the purpose of t7900-subtree.sh's
`subtree_test_create_repo` helper function is. It wraps test-lib.sh's,
`test_create_repo` but follows that up by setting log.date=relative. Why
does it set log.date=relative?
My first guess was that at one point the tests required that, but no
longer do, and that the function is now vestigial. I even wrote a patch
to get rid of it and was moments away from `git send-email`ing it.
However, by chance when looking for something else in the history, I
discovered the true reason, from e7aac44ed2 (contrib/subtree: ignore
log.date configuration, 2015-07-21). It's testing that setting
log.date=relative doesn't break `git subtree`, as at one point in the past
that did break `git subtree`.
So, add a comment about this, to avoid future such confusion.
And while at it, go ahead and (1) touch up the function to avoid a
pointless subshell and (2) update the one test that didn't use it.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The formatting in t7900-subtree.sh isn't even consistent throughout the
file. Fix that; make it consistent throughout the file.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test-lib.sh's `test_count`, instead instead of having
t7900-subtree.sh do its own book-keeping with `subtree_test_count` that
has to be explicitly incremented by calling `next_test`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the tests had been converted to support
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`, but `contrib/subtree/t/`
hadn't.
Convert it. Most of the mentions of 'master' can just be replaced with
'HEAD'.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $subcommand case statement in _git_stash() is quite repetitive.
Consolidate the cases together into one catch-all case to reduce the
repetition.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the introduction of the $__git_cmd_idx variable in e94fb44042
(git-completion.bash: pass $__git_subcommand_idx from __git_main(),
2021-03-24), completion functions were able to know the index at which
the git command is listed, allowing them to skip options that are given
to the underlying git itself, not the corresponding command (e.g.
`-C asdf` in `git -C asdf branch`).
While most of the changes here are self-explanatory, some bear further
explanation.
For the __git_find_on_cmdline() and __git_find_last_on_cmdline() pair of
functions, these functions are only ever called in the context of a git
command completion function. These functions will only care about words
after the command so we can safely ignore the words before this.
For _git_worktree(), this change is technically a no-op (once the
__git_find_last_on_cmdline change is also applied). It was in poor style
to have hard-coded on the index right after `worktree`. In case
`git worktree` were to ever learn to accept options, the current
situation would be inflexible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), the $__git_subcommand_idx variable was
introduced. Naming it after the index of the subcommand is needlessly
confusing as, when this variable is used, it is in the completion
functions for commands (e.g. _git_remote()) where for `git remote add`,
the `remote` is referred to as the command and `add` is referred to as
the subcommand.
Rename this variable so that it's obvious it's about git commands. While
we're at it, shorten up its name so that it's still readable without
being a handful to type.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), a line was introduced which contained
multiple statements. This is difficult to read so break it into multiple
lines.
While we're at it, follow this convention for the rest of the
__git_main() and break up lines that contain multiple statements.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliased command lookup accesses the `list` variable before it has been
set, causing an error in "nounset" mode. Initialize to an empty string
to avoid that.
$ git nonexistent-command <Tab>bash: list: unbound variable
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion (in contrib/) has learned that
CHERRY_PICK_HEAD is a possible pseudo-ref.
* ab/complete-cherry-pick-head:
bash completion: complete CHERRY_PICK_HEAD
The command-line completion script (in contrib/) had a couple of
references that would have given a warning under the "-u" (nounset)
option.
* vs/completion-with-set-u:
completion: audit and guard $GIT_* against unset use
$GIT_COMPLETION_SHOW_ALL and $GIT_TESTING_ALL_COMMAND_LIST were used
without guarding against them being unset, causing errors in nounset
(set -u) mode.
No other nounset-unsafe $GIT_* usages were found.
While at it, remove a superfluous (duplicate) unset guard from $GIT_DIR
in __git_find_repo_path.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When e.g. in a failed cherry pick we did not recognize
CHERRY_PICK_HEAD as we do e.g. REBASE_HEAD in a failed rebase let's
rectify that.
When REBASE_HEAD was added in fbd7a23237 (rebase: introduce and use
pseudo-ref REBASE_HEAD, 2018-02-11) a completion was added for it, but
no corresponding completion existed for CHERRY_PICK_HEAD added in
d7e5c0cbfb (Introduce CHERRY_PICK_HEAD, 2011-02-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A simple IPC interface gets introduced to build services like
fsmonitor on top.
* jh/simple-ipc:
t0052: add simple-ipc tests and t/helper/test-simple-ipc tool
simple-ipc: add Unix domain socket implementation
unix-stream-server: create unix domain socket under lock
unix-socket: disallow chdir() when creating unix domain sockets
unix-socket: add backlog size option to unix_stream_listen()
unix-socket: eliminate static unix_stream_socket() helper function
simple-ipc: add win32 implementation
simple-ipc: design documentation for new IPC mechanism
pkt-line: add options argument to read_packetized_to_strbuf()
pkt-line: add PACKET_READ_GENTLE_ON_READ_ERROR option
pkt-line: do not issue flush packets in write_packetized_*()
pkt-line: eliminate the need for static buffer in packet_write_gently()
Our CMake configuration generates not only build definitions, but also
install definitions: After building Git using `msbuild git.sln`, the
built artifacts can be installed via `msbuild INSTALL.vcxproj`.
To specify _where_ the files should be installed, the
`-DCMAKE_INSTALL_PREFIX=<path>` option can be used when running CMake.
However, this process would really only install the files that were just
built. On Windows, we need more than that: We also need the `.dll` files
of the dependencies (such as libcurl). The `vcpkg` ecosystem, which we
use to obtain those dependencies, can be asked to install said `.dll`
files really easily, so let's do that.
This requires more than just the built `vcpkg` artifacts in the CI build
definition; We now clone the `vcpkg` repository so that the relevant
CMake scripts are available, in particular the ones related to defining
the toolchain.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to add support for installing the `.dll` files of Git's
dependencies (such as libcurl) in the CMake configuration. The `vcpkg`
ecosystem from which we get said dependencies makes that relatively
easy: simply turn on `X_VCPKG_APPLOCAL_DEPS_INSTALL`.
However, current `vcpkg` introduces a limitation if one does that:
While it is totally cool with CMake to specify multiple targets within
one invocation of `install(TARGETS ...) (at least according to
https://cmake.org/cmake/help/latest/command/install.html#command:install),
`vcpkg`'s parser insists on a single target per `install(TARGETS ...)`
invocation.
Well, that's easily accomplished: Let's feed the targets individually to
the `install(TARGETS ...)` function in a `foreach()` look.
This also has the advantage that we do not have to manually cull off the
two entries from the `${PROGRAMS_BUILT}` array before scheduling the
remainder to be installed into `libexec/git-core`. Instead, we iterate
through the array and decide for each entry where it wants to go.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By mistake, the `.exe` extension is appended _twice_ when installing the
dashed executables into `libexec/git-core/` on Windows (the extension is
already appended when adding items to the `git_links` list in the
`#Creating hardlinks` section).
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like the Makefile-based build learned to skip hard-linking the
dashed built-ins in 179227d6e2 (Optionally skip linking/copying the
built-ins, 2020-09-21), this patch teaches the CMake-based build the
same trick.
Note: In contrast to the Makefile-based process, the built-ins would
only be linked during installation, not already when Git is built.
Therefore, the CMake-based build that we use in our CI builds _already_
does not link those built-ins (because the files are not installed
anywhere, they are used to run the test suite in-place).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion for 'git stash' has not changed in a major way since it
was converted from shell script to builtin. Now that it's a builtin, we
can take advantage of the groundwork laid out by parse-options and use
the generated options.
Rewrite _git_stash() to take use __gitcomp_builtin() to generate
completions for subcommands.
The main `git stash` command does not take any arguments directly. If no
subcommand is given, it automatically defaults to `git stash push`. This
means that we can simplify the logic for when no subcommands have been
given yet. We only have to offer subcommand completions when we're
completing a non-option after "stash".
One area that this patch could improve upon is that the `git stash list`
command accepts log-options. It would be nice if the completion for this
were unified with that of _git_log() and _git_show() which would allow
completions to be provided for options such as `--pretty` but that is
outside the scope of this patch.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To save a level of indentation, perform an early return in the "if" arm
so we can move the "else" code out of the block.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many completion functions perform hardcoded comparisons with $cword.
This fails in the case where the main git command is given arguments
(e.g. `git -C . bundle<TAB>` would fail to complete its subcommands).
Even _git_worktree(), which uses __git_find_on_cmdline(), could still
fail. With something like `git -C add worktree move<TAB>`, the
subcommand would be incorrectly identified as "add" instead of "move".
Assign $__git_subcommand_idx in __git_main(), where the git subcommand
is actually found and the corresponding completion function is called.
Use this variable to replace hardcoded comparisons with $cword.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash show" learned to optionally show untracked part of the
stash.
* dl/stash-show-untracked:
stash show: learn stash.showIncludeUntracked
stash show: teach --include-untracked and --only-untracked
Create Unix domain socket based implementation of "simple-ipc".
A set of `ipc_client` routines implement a client library to connect
to an `ipc_server` over a Unix domain socket, send a simple request,
and receive a single response. Clients use blocking IO on the socket.
A set of `ipc_server` routines implement a thread pool to listen for
and concurrently service client connections.
The server creates a new Unix domain socket at a known location. If a
socket already exists with that name, the server tries to determine if
another server is already listening on the socket or if the socket is
dead. If socket is busy, the server exits with an error rather than
stealing the socket. If the socket is dead, the server creates a new
one and starts up.
If while running, the server detects that its socket has been stolen
by another server, it automatically exits.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allocating a pre-cleared single element is quite common and it is
misleading to use CALLOC_ARRAY(); these allocations that would be
affected without this change are not allocating an array.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a wrapper class for `unix_stream_listen()` that uses a ".lock"
lockfile to create the unix domain socket in a race-free manner.
Unix domain sockets have a fundamental problem on Unix systems because
they persist in the filesystem until they are deleted. This is
independent of whether a server is actually listening for connections.
Well-behaved servers are expected to delete the socket when they
shutdown. A new server cannot easily tell if a found socket is
attached to an active server or is leftover cruft from a dead server.
The traditional solution used by `unix_stream_listen()` is to force
delete the socket pathname and then create a new socket. This solves
the latter (cruft) problem, but in the case of the former, it orphans
the existing server (by stealing the pathname associated with the
socket it is listening on).
We cannot directly use a .lock lockfile to create the socket because
the socket is created by `bind(2)` rather than the `open(2)` mechanism
used by `tempfile.c`.
As an alternative, we hold a plain lockfile ("<path>.lock") as a
mutual exclusion device. Under the lock, we test if an existing
socket ("<path>") is has an active server. If not, we create a new
socket and begin listening. Then we use "rollback" to delete the
lockfile in all cases.
This wrapper code conceptually exists at a higher-level than the core
unix_stream_connect() and unix_stream_listen() routines that it
consumes. It is isolated in a wrapper class for clarity.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create Windows implementation of "simple-ipc" using named pipes.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the number of elements first and ther size second, as expected
by xcalloc(). Provide a semantic patch, which was actually used to
generate the rest of this patch.
The semantic patch would generate flip-flop diffs if both arguments
are sizeofs. We don't have such a case, and it's hard to imagine
the usefulness of such an allocation. If it ever occurs then we
could deal with it by duplicating the rule in the semantic patch to
make it cancel itself out, or we could change the code to use
CALLOC_ARRAY.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stash entries can be made with untracked files via
`git stash push --include-untracked`. However, because the untracked
files are stored in the third parent of the stash entry and not the
stash entry itself, running `git stash show` does not include the
untracked files as part of the diff.
With --include-untracked, untracked paths, which are recorded in the
third-parent if it exists, are shown in addition to the paths that have
modifications between the stash base and the working tree in the stash.
It is possible to manually craft a malformed stash entry where duplicate
untracked files in the stash entry will mask tracked files. We detect
and error out in that case via a custom unpack_trees() callback:
stash_worktree_untracked_merge().
Also, teach stash the --only-untracked option which only shows the
untracked files of a stash entry. This is similar to `git show stash^3`
but it is nice to provide a convenient abstraction for it so that users
do not have to think about the underlying implementation.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion (in contrib/) completed "git branch -d"
with branch names, but "git branch -D" offered tagnames in addition,
which has been corrected. "git branch -M" had the same problem.
* jk/complete-branch-force-delete:
doc/git-branch: fix awkward wording for "-c"
completion: handle other variants of "branch -m"
completion: treat "branch -D" the same way as "branch -d"
We didn't special-case "branch -M" (with a capital M) the same as
"branch -m", nor any of the "--copy" variants. As a result these offered
any ref as the next candidate, and not just branch names.
Note that I rewrapped case-arm line since it's now quite long, and
likewise the one below it for consistency. I also re-ordered the
existing "-D" to make it more obvious how the cases group together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The former offers not just branches but tags as completion
candidates.
Mimic how "branch -d" limits its suggestion to branch names.
Reported-by: Paul Jolly <paul@myitcv.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove support for using version 1 of the PCRE library. Its use has
been discouraged by upstream for a long time, and it's in a
bugfix-only state.
Anyone who was relying on v1 in particular got a nudge to move to v2
in e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11), which was first released as part of v2.18.0.
With this the LIBPCRE2 test prerequisites is redundant to PCRE. But
I'm keeping it for self-documentation purposes, and to avoid conflict
with other in-flight PCRE patches.
I'm also not changing all of our own "pcre2" names to "pcre", i.e. the
inverse of 6d4b5747f0 (grep: change internal *pcre* variable &
function names to be *pcre1*, 2017-05-25). I don't see the point, and
it makes the history/blame harder to read. Maybe if there's ever a
PCRE v3...
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When __git_complete was introduced, it was meant to be temporarily, while
a proper guideline for public shell functions was established
(tentatively _GIT_complete), but since that never happened, people
in the wild started to use __git_complete, even though it was marked as
not public.
Eight years is more than enough wait, let's mark this function as
public, and make it a bit more user-friendly.
So that instead of doing:
__git_complete gk __gitk_main
The user can do:
__git_complete gk gitk
And instead of:
__git_complete gf _git_fetch
Do:
__git_complete gf git_fetch
Backwards compatibility is maintained.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1. We should quote the argument
2. We don't need two redirections
3. A safeguard for arguments (-a) would be good
Suggested-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the code more readable, and also will help when new code
wants to do similar checks.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long time ago when the _git_complete helper was introduced, _gitk was
replaced with __gitk_main, and a placeholder for backwards compatibility
pointing to __git_wrap_main_gitk was left in place.
When "__git_complete gitk __gitk_main" was called, that created the
__git_wrap__gitk_main helper, which is just basically "__git_func_wrap
__gitk_main" plus `complete` options.
Unfortunately the commit b0a4b2d257 (completion: add support for
backwards compatibility, 2012-05-19) missed a previous instance of a
call to _gitk in _git_gitk
So, basically we had __git_wrap__git_main -> __git_func_wrap __git_main ->
__git_complete_command gitk -> _git_gitk -> _gitk ->
__git_wrap__gitk_main -> __git_func_wrap __gitk_main -> __gitk_main.
There was never any need to call __git_func_wrap twice. Since _git_gitk
is always called inside the wrapper, it can call __gitk_main directly.
And then, in commit 441ecdab37 (completion: bash: remove old compat
wrappers, 2020-10-27) _gitk was removed, which triggers the following
error:
_git_gitk:9: command not found: _gitk
Let's call the correct function: __gitk_main.
Cc: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0a21d0e089 (Makefile: mark git-maintenance as a builtin,
2020-12-01), we marked git-maintenance as a builtin in the Makefile, but
forgot to do the same in `CMakeLists.txt`.
Rather than always play catch-up and adjust `git_builtin_extra`
manually, use the `BUILT_INS` definitions in the Makefile as
authoritative source and generate `git_builtin_extra` dynamically.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Something changed in `vcpkg` (which we use in our Visual C++ build to
provide the dependencies such as libcurl) and our `vs-build` job started
failing in CI. The reason is that we had a work-around in place to help
CMake find iconv, and this work-around is neither needed nor does it
work anymore.
For the full discussion with the vcpkg project, see this comment:
https://github.com/microsoft/vcpkg/issues/14780#issuecomment-735368280
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turns out we always need to set the ignored prefix (compset) to have
similar behavior as in default Bash.
The issue can be seen with:
git show master:<tab>
Commit 94b2901cfe wrongly removed it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion script (in contrib/) learned to expand
commands that are alias of alias.
* fc/bash-completion-alias-of-alias:
completion: bash: improve alias loop detection
completion: bash: check for alias loop
completion: bash: support recursive aliases
It is possible for the name of an alias to end with the name of another
alias, in which case the code will incorrectly detect a loop.
We can fix that by adding an extra space between words.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't want to be stuck in an endless cycle.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to have recursive aliases like:
l = log --oneline
lg = l --graph
So the completion should detect such aliases as well.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable 'option' is used in __git_ps1_show_upstream()
without being localized.
This clobbers the variable the user may be using for other
purposes, which is bad. Luckily, $option is not used to carry
information around in the script as a global variable. The use
of it in this script has very limited scope (namely, only inside
this function), so just declare that it is "local".
Signed-off-by: Sibo Dong <sibo.dong@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git resurrect" script (in contrib/) learned that the object names
may be longer than 40-hex depending on the hash function in use.
* dl/resurrect-update-for-sha256:
contrib/git-resurrect.sh: use hash-agnostic OID pattern
contrib/git-resurrect.sh: indent with tabs
It's been eight years, more than enough time to move on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to set a variable we are not going to use.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of people are confused about which completion script they are
using; Zsh's Git script, or Git's Zsh script.
Add a simple helper so they can type 'git zsh<tab>' and find out if they
are running the correct one: this.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to use _alternative and repeat a lot of the code.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's exactly the same as __gitcomp_file() with no prefix.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's exactly the same as __gitcomp_nl(), no need to duplicate code.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
