When "format-patch" quoted a non-ascii strings on the header files,
it incorrectly applied rfc2047 and chopped a single character in the
middle of it.
* ks/rfc2047-one-char-at-a-time:
format-patch: RFC 2047 says multi-octet character may not be split
Even though an earlier attempt (bafc478..41dd00bad) cleaned
up RFC 2047 encoding, pretty.c::add_rfc2047() still decides
where to split the output line by going through the input
one byte at a time, and potentially splits a character in
the middle. A subject line may end up showing like this:
".... fö?? bar". (instead of ".... föö bar".)
if split incorrectly.
RFC 2047, section 5 (3) explicitly forbids such beaviour
Each 'encoded-word' MUST represent an integral number of
characters. A multi-octet character may not be split across
adjacent 'encoded- word's.
that means that e.g. for
Subject: .... föö bar
encoding
Subject: =?UTF-8?q?....=20f=C3=B6=C3=B6?=
=?UTF-8?q?=20bar?=
is correct, and
Subject: =?UTF-8?q?....=20f=C3=B6=C3?= <-- NOTE ö is broken here
=?UTF-8?q?=B6=20bar?=
is not, because "ö" character UTF-8 encoding C3 B6 is split here across
adjacent encoded words.
To fix the problem, make the loop grab one _character_ at a time and
determine its output length to see where to break the output line. Note
that this version only knows about UTF-8, but the logic to grab one
character is abstracted out in mbs_chrlen() function to make it possible
to extend it to other encodings with the help of iconv in the future.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually a commit that makes it to logmsg_reencode will have
been parsed, and the commit->buffer struct member will be
valid. However, some code paths will free commit buffers
after having used them (for example, the log traversal
machinery will do so to keep memory usage down).
Most of the time this is fine; log should only show a commit
once, and then exits. However, there are some code paths
where this does not work. At least two are known:
1. A commit may be shown as part of a regular ref, and
then it may be shown again as part of a submodule diff
(e.g., if a repo contains refs to both the superproject
and subproject).
2. A notes-cache commit may be shown during "log --all",
and then later used to access a textconv cache during a
diff.
Lazily loading in logmsg_reencode does not necessarily catch
all such cases, but it should catch most of them. Users of
the commit buffer tend to be either parsing for structure
(in which they will call parse_commit, and either we will
already have parsed, or we will load commit->buffer lazily
there), or outputting (either to the user, or fetching a
part of the commit message via format_commit_message). In
the latter case, we should always be using logmsg_reencode
anyway (and typically we do so via the pretty-print
machinery).
If there are any cases that this misses, we can fix them up
to use logmsg_reencode (or handle them on a case-by-case
basis if that is inappropriate).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logmsg_reencode function will return the reencoded
commit buffer, or NULL if reencoding failed or no reencoding
was necessary. Since every caller then ends up checking for NULL
and just using the commit's original buffer, anyway, we can
be a bit more helpful and just return that buffer when we
would have returned NULL.
Since the resulting string may or may not need to be freed,
we introduce a logmsg_free, which checks whether the buffer
came from the commit object or not (callers either
implemented the same check already, or kept two separate
pointers, one to mark the buffer to be used, and one for the
to-be-freed string).
Pushing this logic into logmsg_* simplifies the callers, and
will let future patches lazily load the commit buffer in a
single place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach commands in the "log" family to optionally pay attention to
the mailmap.
* ap/log-mailmap:
log --use-mailmap: optimize for cases without --author/--committer search
log: add log.mailmap configuration option
log: grep author/committer using mailmap
test: add test for --use-mailmap option
log: add --use-mailmap option
pretty: use mailmap to display username and email
mailmap: add mailmap structure to rev_info and pp
mailmap: simplify map_user() interface
mailmap: remove email copy and length limitation
Use split_ident_line to parse author and committer
string-list: allow case-insensitive string list
This conversion avoids the need for magic string length numbers in the
code. And unlike memcmp(), prefixcmp() is careful to not run over the
end of a string.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the mailmap information to display the rewritten
username and email address in all log commands.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify map_user(), mostly to avoid copies of string buffers. It
also simplifies caller functions.
map_user() directly receive pointers and length from the commit buffer
as mail and name. If mapping of the user and mail can be done, the
pointer is updated to a new location. Lengths are also updated if
necessary.
The caller of map_user() can then copy the new email and name if
necessary.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently blame.c::get_acline(), pretty.c::pp_user_info() and
shortlog.c::insert_one_record() are parsing author name, email, time
and tz themselves.
Use ident.c::split_ident_line() for better code reuse.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce "log --format=%C(auto,blue)Foo%C(auto,reset)" that does
not color its output when writing to a non-terminal.
* jc/format-color-auto:
log --format: teach %C(auto,black) to respect color config
t6006: clean up whitespace
Finishing touches to the series to unify "Do we need to reencode
between these two encodings?" logic.
* jc/same-encoding:
format_commit_message(): simplify calls to logmsg_reencode()
Traditionally, %C(color attr) always emitted the ANSI color
sequence; it was up to the scripts that wanted to conditionally
color their output to omit %C(...) specifier when they do not want
colors.
Optionally allow "auto," to be prefixed to the color, so that the
output is colored iff we would color regular "log" output
(e.g., taking into account color.* and --color command line
options).
Tests and pretty_context bits by Jeff King <peff@peff.net>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the other callers of logmsg_reencode() pass return value of
get_commit_output_encoding() or get_log_output_encoding(). Teach
the function to optionally take NULL as a synonym to "" aka "no
conversion requested" so that we can simplify the only remaining
calling site.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
Emit the notes attached to the commit in "format-patch --notes"
output after three-dashes.
* jc/prettier-pretty-note:
format-patch: add a blank line between notes and diffstat
Doc User-Manual: Patch cover letter, three dashes, and --notes
Doc format-patch: clarify --notes use case
Doc notes: Include the format-patch --notes option
Doc SubmittingPatches: Mention --notes option after "cover letter"
Documentation: decribe format-patch --notes
format-patch --notes: show notes after three-dashes
format-patch: append --signature after notes
pretty_print_commit(): do not append notes message
pretty: prepare notes message at a centralized place
format_note(): simplify API
pretty: remove reencode_commit_message()
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
Conflicts:
builtin/mailinfo.c
Callers of reencode_string() that re-encodes a string from one
encoding to another all used ad-hoc way to bypass the case where the
input and the output encodings are the same. Some did strcmp(),
some did strcasecmp(), yet some others when converting to UTF-8 used
is_encoding_utf8().
Introduce same_encoding() helper function to make these callers use
the same logic. Notably, is_encoding_utf8() has a work-around for
common misconfiguration to use "utf8" to name UTF-8 encoding, which
does not match "UTF-8" hence strcasecmp() would not consider the
same. Make use of it in this helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to RFC 2047 and RFC 822, rfc2047 encoded words and and rfc822
quoted strings do not mix. Since add_rfc2047() no longer leaves RFC 822
specials behind, the quoting is also no longer necessary to create a
standard-conforming mail.
Remove the quoting, when RFC 2047 encoding takes place. This actually
requires to refactor add_rfc2047() a bit, so that the different cases
can be distinguished.
With this patch, my own name gets correctly decoded as Jan H. Schönherr
(without quotes) and not as "Jan H. Schönherr" (with quotes).
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RFC 2047 requires more characters to be encoded than it is currently done.
Especially, RFC 2047 distinguishes between allowed remaining characters
in encoded words in addresses (From, To, etc.) and other headers, such
as Subject.
Make add_rfc2047() and is_rfc2047_special() location dependent and include
all non-allowed characters to hopefully be RFC 2047 conformant.
This especially fixes a problem, where RFC 822 specials (e. g. ".") were
left unencoded in addresses, which was solved with a non-standard-conforming
workaround in the past (which is going to be removed in a follow-up patch).
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, an open-coded loop to calculate the length of the last
line of a string buffer is used in multiple places.
Move that code into a function of its own.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encoded characters add more than one character at once to an encoded
header. Include all characters that are about to be added in the length
calculation for wrapping.
Additionally, RFC 2047 imposes a maximum line length of 76 characters
if that line contains an rfc2047 encoded word.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not wrap the second and later lines of non-rfc2047-encoded headers
substantially before the 78 character limit.
Instead of passing the remaining length of the first line as wrapping
width, use the correct maximum length and tell strbuf_add_wrapped_bytes()
how many characters of the first line are already used.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only case pretty_print_commit() appends notes message to the log
message taken from the commit is when show_log() calls it with the
notes_message field set, and the output format is not the userformat
(i.e. when substituting "%N"). No other users of this function sets
this field in the pretty_print_context, as can be easily verified in
the previous step.
Hoist the code to append the notes message to the caller.
Up to this point, no functionality change is intended.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of passing a boolean show_notes around, pass an optional
string that is to be inserted after the log message proper is shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We either stuff the notes message without modification for %N
userformat, or format it for human consumption. Using two bits
is an overkill that does not benefit anybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function has only two callsites, and is a thin wrapper whose
usefulness is dubious. When the caller needs to learn the log
output encoding, it should be able to do so by directly calling
get_log_output_encoding() and calling the underlying
logmsg_reencode() with it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit object has a header line at the end of the
buffer that is missing its newline (or if it appears so
because the content on the header line contains a stray
NUL), then git will segfault.
Interestingly, this case is explicitly handled and we do
correctly scan the final line for the header we are looking
for. But if we don't find it, we will dereference NULL while
trying to look at the next line.
Git will never generate such a commit, but it's good to be
defensive. We could die() in such a case, but since it's
easy enough to handle it gracefully, let's just issue a
warning and continue (so you could still view such a commit
with "git show", though you might be missing headers after
the NUL).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse the name and email from a commit to
pretty-print them, we usually can just put the result
directly into our strbuf result. However, if we are going to
use the mailmap, then we must first copy them into a
NUL-terminated buffer to feed to the mailmap machinery.
We did so by using strlcpy into a static buffer, but we used
it wrong. We fed it the length of the substring we wanted to
copy, but never checked that that length was less than the
size of the destination buffer.
The simplest fix is to just use snprintf to copy the
substring properly while still respecting the destination
buffer's size. It might seem like replacing the static
buffer with a strbuf would help, but we need to feed a
static buffer to the mailmap machinery anyway, so there's
not much benefit to handling arbitrary sizes.
A more ideal solution would be for mailmap to grow an
interface that:
1. Takes a pointer and length combination, instead of
assuming a NUL-terminated string.
2. Returns a pointer to the mailmap's allocated string,
rather than copying it into the buffer.
Then we could avoid the need for an extra buffer entirely.
However, doing this would involve a lot of refactoring of
mailmap and of string_list (which mailmap uses to store the
map itself). For now, let's do the simplest thing to fix the
bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
Introduction of opt->date_mode_explicit was a step in the right direction,
but lost that crucial bit at the very end of the callchain, and the callee
could not tell an explicitly specified "I want *date* but in default format"
from the built-in default value passed when there was no --date specified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we show a reflog selector (e.g., via "git log -g"), we
perform some DWIM magic: while we normally show the entry's
index (e.g., HEAD@{1}), if the user has given us a date
with "--date", then we show a date-based select (e.g.,
HEAD@{yesterday}).
However, we don't want to trigger this magic if the
alternate date format we got was from the "log.date"
configuration; that is not sufficiently strong context for
us to invoke this particular magic. To fix this, commit
f4ea32f (improve reflog date/number heuristic, 2009-09-24)
introduced a "date_mode_explicit" flag in rev_info. This
flag is set only when we see a "--date" option on the
command line, and we a vanilla date to the reflog code if
the date was not explicit.
Later, commit 8f8f547 (Introduce new pretty formats %g[sdD]
for reflog information, 2009-10-19) added another way to
show selectors, and it did not respect the date_mode_explicit
flag from f4ea32f.
This patch propagates the date_mode_explicit flag to the
pretty-print code, which can then use it to pass the
appropriate date field to the reflog code. This brings the
behavior of "%gd" in line with the other formats, and means
that its output is independent of any user configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit formatting logic format_person_part() in pretty.c
implements the logic to split an author/committer ident line into
its parts, intermixed with logic to compute its output using these
piece it computes.
Separate the former out to a helper function split_ident_line() so
that other codepath can use the same logic, and rewrite the function
using the helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/show-sig:
log --show-signature: reword the common two-head merge case
log-tree: show mergetag in log --show-signature output
log-tree.c: small refactor in show_signature()
commit --amend -S: strip existing gpgsig headers
verify_signed_buffer: fix stale comment
gpg-interface: allow use of a custom GPG binary
pretty: %G[?GS] placeholders
test "commit -S" and "log --show-signature"
log: --show-signature
commit: teach --gpg-sign option
Conflicts:
builtin/commit-tree.c
builtin/commit.c
builtin/merge.c
notes-cache.c
pretty.c
When doing a reflog walk, you can get some information about
the reflog (such as the subject line), but not the identity
information (i.e., name and email).
Let's make those available, mimicing the options for author
and committer identity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new placeholders related to the GPG signature on signed commits.
- %GG to show the raw verification message from GPG;
- %G? to show either "G" for Good, "B" for Bad;
- %GS to show the name of the signer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
In older versions of git, we used rfc822 header folding to
indicate that the original subject line had multiple lines
in it. But since a1f6baa (format-patch: wrap long header
lines, 2011-02-23), we now use header folding whenever there
is a long line.
This means that "git am" cannot trust header folding as a
sign from format-patch that newlines should be preserved.
Instead, format-patch needs to signal more explicitly that
the newlines are significant. This patch does so by
rfc2047-encoding the newlines in the subject line. No
changes are needed on the "git am" end; it already decodes
the newlines properly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a pretty_print_context representing the parameters
for a pretty-print session, but we did not use it uniformly.
As a result, functions kept growing more and more arguments.
Let's clean this up in a few ways:
1. All pretty-print pp_* functions now take a context.
This lets us reduce the number of arguments to these
functions, since we were just passing around the
context values separately.
2. The context argument now has a cmit_fmt field, which
was passed around separately. That's one less argument
per function.
3. The context argument always comes first, which makes
calling a little more uniform.
This drops lines from some callers, and adds lines in a few
places (because we need an extra line to set the context's
fmt field). Overall, we don't save many lines, but the lines
that are there are a lot simpler and more readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers don't actually care about the pretty print
context at all; let's just give them a simple way of
pretty-printing a commit without having to create a context
struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was introduced in 5b16360 (pretty: Initialize notes if %N is
used, 2010-04-13) to check what kind of information the "log --format=..."
user format string wants. The function can be passed a NULL instead of a
format string to ask it to check user_format variable kept by an earlier
call to save_user_format().
But it unconditionally checked user_format and not the string it was
given. The only caller introduced by the change passes NULL, which
kept the bug unnoticed, until a new GCC noticed that there is an
assignment to fmt that is never used.
Noticed-by: Chris Wilson's compiler
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jeff King <peff@peff.net>
