We used to say "you are not on a branch" before the initial
commit. This is incorrect -- the user is on a branch yet to be
born, but its name has been already determined.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows "git checkout v1.4.3" to dissociate the HEAD of
repository from any branch. After this point, "git branch"
starts reporting that you are not on any branch. You can go
back to an existing branch by saying "git checkout master", for
example.
This is still experimental. While I think it makes sense to
allow commits on top of detached HEAD, it is rather dangerous
unless you are careful in the current form. Next "git checkout
master" will obviously lose what you have done, so we might want
to require "git checkout -f" out of a detached HEAD if we find
that the HEAD commit is not an ancestor of any other branches.
There is no such safety valve implemented right now.
On the other hand, the reason the user did not start the ad-hoc
work on a new branch with "git checkout -b" was probably because
the work was of a throw-away nature, so the convenience of not
having that safety valve might be even better. The user, after
accumulating some commits on top of a detached HEAD, can always
create a new branch with "git checkout -b" not to lose useful
work done while the HEAD was detached.
We'll see.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes git-branch show a detached HEAD as '* (no branch)'.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is bad manners to leave these sizable files
around when we are done with them.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the earlier "wait for 10 minutes before importing" safety
overridable with "-a(ll)" flag, and adds necessary documentation.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometimes, people have only fetch access into a bare repository
that is used as a back-up location (or a distribution point) but
does not have a push access for networking reasons, e.g. one end
being behind a firewall, and updating the "current branch" in
such a case is perfectly fine.
This allows such a fetch without --update-head-ok, which is a
flag that should never be used by end users otherwise.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the old is_bare_git_dir(const char *) to ask if a
directory, if it is a GIT_DIR, is a bare repository, and
replaces it with is_bare_repository(void *). The function looks
at core.bare configuration variable if exists but uses the old
heuristics: if it is ".git" or ends with "/.git", then it does
not look like a bare repository, otherwise it does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The patches to prevent Porcelainish that require working tree
from doing any damage in a bare repository make a lot of sense,
and I want to make the is_bare_git_dir() function more reliable.
In order to allow the repository owner override the heuristic
implemented in is_bare_git_dir() if/when it misidentifies a
particular repository, it would make sense to introduce a new
configuration variable "[core] bare = true/false", and make
is_bare_git_dir() notice it.
The scripts would do a 'repo-config --bool --get core.bare' and
iff the command fails (i.e. there is no such variable in the
configuration file), it would use the heuristic implemented at
the script level [*1*].
However, setup_git_env() which is called a lot earlier than we
even read from the repository configuration currently makes a
call to is_bare_git_dir(), in order to change the default
setting for log_all_ref_updates. It somehow feels that this is
a hack.
By the way, [*1*] is another thing I hate about the current
config mechanism. "git-repo-config --get" does not know what
the possible configuration variables are, let alone what the
default values for them are. It allows us not to maintain a
centralized configuration table, which makes it easy to
introduce ad-hoc variables and gives a warm fuzzy feeling of
being modular, but my feeling is that it is turning out to be a
rather high price to pay for scripts.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some users apparently create local heads with the same basename
as the remote branch they're tracking.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also, document --{trunk,branches,tags} options while we're
documenting multi-init options.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clarify definition of "reachable" (what chain?)
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes newly introduced bug when the incremental cycle edge revisions
are imported twice.
Signed-off-by: Sasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this patch, cvsimport will skip commits made
in the last 10 minutes. The recent-ness test is of
5 minutes + cvsps fuzz window (5 minutes default).
When working with a CVS repository that is in use,
importing commits that are too recent can lead to
partially incorrect trees. This is mainly due to
- Commits that are within the cvsps fuzz window may later
be found to have affected more files.
- When performing incremental imports, clock drift between
the systems may lead to skipped commits.
This commit helps keep incremental imports of in-use
CVS repositories sane.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove superfluous trailing "|" separator from difftree part of "commit"
view for new files (created in given commit).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since git-reset has learned restoring the absence of paths git-rm --cached is
no longer necessary. Therefore remove it from the cached content header hint.
Also remove the unfortunate wording 'Cached' from the header itself.
Signed-off-by: Jürgen Rühle <j-r@online.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make "init" the equivalent of "init-db". This should make first GIT
impression a little more friendly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* sp/mmap: (27 commits)
Spell default packedgitlimit slightly differently
Increase packedGit{Limit,WindowSize} on 64 bit systems.
Update packedGit config option documentation.
mmap: set FD_CLOEXEC for file descriptors we keep open for mmap()
pack-objects: fix use of use_pack().
Fix random segfaults in pack-objects.
Cleanup read_cache_from error handling.
Replace mmap with xmmap, better handling MAP_FAILED.
Release pack windows before reporting out of memory.
Default core.packdGitWindowSize to 1 MiB if NO_MMAP.
Test suite for sliding window mmap implementation.
Create pack_report() as a debugging aid.
Support unmapping windows on 'temporary' packfiles.
Improve error message when packfile mmap fails.
Ensure core.packedGitWindowSize cannot be less than 2 pages.
Load core configuration in git-verify-pack.
Fully activate the sliding window pack access.
Unmap individual windows rather than entire files.
Document why header parsing won't exceed a window.
Loop over pack_windows when inflating/accessing data.
...
Conflicts:
cache.h
pack-check.c
This is shorter and easier to read, and also makes sure the
constant expression does not overflow integer range.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jr/status:
Improve cached content header of status output
Support --amend on initial commit in status output
Improve "nothing to commit" part of status output
Clarify syntax and role of git-add in status output
When <path> exists in the index (either merged or unmerged), and
<tree> does not have it, git-reset should be usable to restore
the absense of it from the tree. This implements it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the way diffcore represents an unmerged pair
somewhat. It used to be that entries with mode=0 on both sides
were used to represent an unmerged pair, but now it has an
explicit flag. This is to allow diff-index --cached to report
the entry from the tree when the path is unmerged in the index.
This is used in updating "git reset <tree> -- <path>" to restore
absense of the path in the index from the tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since we use the reachability tracking machinery now, we should
keep the already checked trees and commits whose completeness is
known, to avoid checking the same thing over and over again.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The logic in an earlier round to detect reflog entries that
point at a broken commit was not sufficient. Just like we do
not trust presense of a commit during pack transfer (we trust
only our refs), we should not trust a commit's presense, even if
the tree of that commit is complete.
A repository that had reflog enabled on some of the refs that
was rewound and then run git-repack or git-prune from older
versions of git can have reflog entries that point at a commit
that still exist but lack commits (or trees and blobs needed for
that commit) between it and some commit that is reachable from
one of the refs.
This revamps the logic -- the definition of "broken commit"
becomes: a commit that is not reachable from any of the refs and
there is a missing object among the commit, tree, or blob
objects reachable from it that is not reachable from any of the
refs. Entries in the reflog that refer to such a commit are
expired.
Since this computation involves traversing all the reachable
objects, i.e. it has the same cost as 'git prune', it is enabled
only when a new option --fix-stale. Fortunately, once this is
run, we should not have to ever worry about missing objects,
because the current prune and pack-objects know about reflogs
and protect objects referred by them.
Unfortunately, this will be absolutely necessary to help people
migrate to the newer prune and repack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves major part of builtin-prune into a separate file,
reachable.c. It is used to mark the objects that are reachable
from refs, and optionally from reflogs.
The patch looks very large, but if you look at it with diff -C,
which this message is formatted in, most of them are copied
lines and there are very little additions.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is necessary for the next step, because the reason I am
making the connectivity walker into a library is because I want
to use it for cleaning up stale reflog entries.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I want to make the first part of 'git prune' that marks the
reachable objects callable as a library, so this starts the
first step toward the goal by making the callchain to pass
rev_info structure as an argument.
No functionality change should be in this step.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not replace /dev/null in two-line from-file/to-file diff header for
split patches ("split" patch mean more than one patch per one
diff-tree raw line) by a/file or b/file link.
Split patches differ from pair of deletion/creation patch in git diff
header: both a/file and b/file are hyperlinks, in all patches in a
split.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 1ebb948f65,
as that patch quieted warning but was not proper solution.
The previous commit was.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We now do not skip over empty patches in git_patchset_body (where
empty means that they consist only of git diff header, and of extended
diff header, for example "pure rename" patch). This means that after
extended diff header there can be next patch (i.e. /^diff /) or end of
patchset, and not necessary patch body (i.e. /^--- /).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix error in git_patchset_body subroutine, which caused "rename to"/"copy
to" line in extended diff header to be displayed incorrectly.
While at it, fix align.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
$from_id, $to_id variables should be local per PATCH.
Fix error in git_patchset_body for file creation (deletion) patches,
where instead of /dev/null as from-file (to-file) diff header line, it
had link to previous file with current file name. This error occured
only if there was another patch before file creation (deletion) patch.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Edit for conciseness.
Add a "Making changes" section header.
When possible, make sure that stuff in text boxes could be entered literally.
(Don't use "..." unless we want a user to type that.)
Move 'commit -a' example into a literal code section, clarify that it finds
modified files automatically.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clarify that dcommit creates a revision in SVN for every commit
in git. Also, add 'merge' to the rebase vs pull section because
git-merge is now a first-class UI.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clean svn path from leading '/' when accessing SVN repo.
Signed-off-by: Sasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds ability to do import "in chunks" (default 1000 revisions),
after each chunk git repo will be repacked. The option -R is used to
change default value of chunk size (or how often repository will
repacked).
Signed-off-by: Sasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead, reinitialize the keywords after the fact. This avoids
conflicts with other users of log-edit mode, like pcl-cvs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It doesn't make a difference for git.el, but it helps when interacting
with git-rebase and friends.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'quiet' flag is set by -q, but it's not used anywhere.
Remove it and set the 'echo1' variable instead.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If a branch other than "master" is checked out in the origin repository,
git-clone makes a local copy of that branch rather than the origin's
"master"
branch. This patch describes the actual behavior.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In order to make the generated tar files more friendly to users who
extract them as root using GNU tar and its implied -p option, change
the default umask to 002 and change the owner name and group name to
root. This ensures that a) the extracted files and directories are
not world-writable and b) that they belong to user and group root.
Before they would have been assigned to a user and/or group named
git if it existed. This also answers the question in the removed
comment: uid=0, gid=0, uname=root, gname=root is exactly what we
want.
Normal users who let tar apply their umask while extracting are
only affected if their umask allowed the world to change their
files (e.g. a umask of zero). This case is so unlikely and strange
that we don't need to support it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we have a 64 bit address space we can easily afford to commit
a larger amount of virtual address space to pack file access.
So on these platforms we should increase the default settings of
core.packedGit{Limit,WindowSize} to something that will better
handle very large projects.
Thanks to Andy Whitcroft for pointing out that we can safely
increase these defaults on such systems.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier test timestamp was too old; I forgot that the bare
unixtime integer had to be after Jan 1, 2000. This changes
test_tick to use the git-epoch timestamp.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Somehow we forgot to turn save_commit_buffer off while walking
the reachable objects. Releasing the memory for commit object
data that we do not use matters for large projects (for example,
about 90MB is saved while traversing linux-2.6 history).
Signed-off-by: Junio C Hamano <junkio@cox.net>
