The clone subcommand has long had support for excluding
subdirectories, but sync has not. This is a nuisance,
since as soon as you do a sync, any changed files that
were initially excluded start showing up.
Move the "exclude" command-line option into the parent
class; the actual behavior was already present there so
it simply had to be exposed.
Signed-off-by: Luke Diamand <luke@diamand.org>
Reviewed-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
run_setup_gently() is called before merge-file. This may result in changing
current working directory, which wasn't taken into account when opening a file
for writing.
Fix by prepending the passed prefix. Previous var is left so that error
messages keep referring to the file from the user's working directory
perspective.
Signed-off-by: Aleksander Boruch-Gruszecki <aleksander.boruchgruszecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because Git tracks symbolic links as symbolic links, a path that
has a symbolic link in its leading part (e.g. path/to/dir/file,
where path/to/dir is a symbolic link to somewhere else, be it
inside or outside the working tree) can never appear in a patch
that validly applies, unless the same patch first removes the
symbolic link to allow a directory to be created there.
Detect and reject such a patch.
Things to note:
- Unfortunately, we cannot reuse the has_symlink_leading_path()
from dir.c, as that is only about the working tree, but "git
apply" can be told to apply the patch only to the index or to
both the index and to the working tree.
- We cannot directly use has_symlink_leading_path() even when we
are applying only to the working tree, as an early patch of a
valid input may remove a symbolic link path/to/dir and then a
later patch of the input may create a path path/to/dir/file, but
"git apply" first checks the input without touching either the
index or the working tree. The leading symbolic link check must
be done on the interim result we compute in-core (i.e. after the
first patch, there is no path/to/dir symbolic link and it is
perfectly valid to create path/to/dir/file).
Similarly, when an input creates a symbolic link path/to/dir and
then creates a file path/to/dir/file, we need to flag it as an
error without actually creating path/to/dir symbolic link in the
filesystem.
Instead, for any patch in the input that leaves a path (i.e. a non
deletion) in the result, we check all leading paths against the
resulting tree that the patch would create by inspecting all the
patches in the input and then the target of patch application
(either the index or the working tree).
This way, we catch a mischief or a mistake to add a symbolic link
path/to/dir and a file path/to/dir/file at the same time, while
allowing a valid patch that removes a symbolic link path/to/dir and
then adds a file path/to/dir/file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should reject a patch, whether it renames/copies dir/file to
elsewhere with or without modificiation, or updates dir/file in
place, if "dir/" part is actually a symbolic link to elsewhere,
by making sure that the code to read the preimage does not read
from a path that is beyond a symbolic link.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, a patch that affects outside the working area (either a
Git controlled working tree, or the current working directory when
"git apply" is used as a replacement of GNU patch) is rejected as a
mistake (or a mischief). Git itself does not create such a patch,
unless the user bends over backwards and specifies a non-standard
prefix to "git diff" and friends.
When `git apply` is used as a "better GNU patch", the user can pass
the `--unsafe-paths` option to override this safety check. This
option has no effect when `--index` or `--cached` is in use.
The new test was stolen from Jeff King with slight enhancements.
Note that a few new tests for touching outside the working area by
following a symbolic link are still expected to fail at this step,
but will be fixed in later steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The string in 'base' contains a path suffix to a specific object;
when its value is used, the suffix must either be filled (as in
stat_sha1_file, open_sha1_file, check_and_freshen_nonlocal) or
cleared (as in prepare_packed_git) to avoid junk at the end.
660c889e (sha1_file: add for_each iterators for loose and packed
objects, 2014-10-15) introduced loose_from_alt_odb(), but this did
neither and treated 'base' as a complete path to the "base" object
directory, instead of a pointer to the "base" of the full path
string.
The trailing path after 'base' is still initialized to NUL, hiding
the bug in some common cases. Additionally the descendent
for_each_file_in_obj_subdir() function swallows ENOENT, so an error
only shows if the alternate's path was last filled with a valid
object (where statting /path/to/existing/00/0bjectfile/00 fails).
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Helped-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing a config value, if we see a carriage
return, we fgetc the next character to see if it is a
line feed (in which case we silently drop the CR). If it
isn't, we then ungetc the character, and take the literal
CR.
But we never check whether we in fact got a character at
all. If the config file ends in CR, we will get EOF here,
and try to ungetc EOF. This works OK for a real stdio
stream. The ungetc returns an error, and the next fgetc will
then return EOF again.
However, our custom buffer-based stream is not so fortunate.
It happily rewinds the position of the stream by one
character, ignoring the fact that we fed it EOF. The next
fgetc call returns the final CR again, over and over, and we
end up in an infinite loop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we add a new submodule the path of the submodule is being
normalized. We fail to normalize multiple adjacent '/./', though.
Thus 'path/to/././submodule' will become 'path/to/./submodule' where
it should be 'path/to/submodule' instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some older versions of gpg (reportedly v1.2.6 from RHEL4) cannot
import the keyrings found in our test suite, and thus cannot even
make a signature. The previous change works it around, but we
cannot anticipate breakages update to GPG would cause in the future.
Do a test-sign before declaring the GPG prerequisite fulfilled
to future-proof our tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1e3eefb (tests: replace binary GPG keyrings with
ASCII-armored keys, 2014-12-12), we import our test GPG keys
from a single file. Each keypair in the import stream
contains both the secret and public keys. However, older
versions of gpg reportedly fail to import the public half of
the key. We can solve this by including duplicates of the
public keys separately. The duplicates are ignored by modern
gpg, and this makes older versions work.
Reported by Tom G. Christensen <tgc@statsbiblioteket.dk> on
gpg 1.2.6 (from RHEL4).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an Accept-Language header which indicates the user's preferred
languages defined by $LANGUAGE, $LC_ALL, $LC_MESSAGES and $LANG.
Examples:
LANGUAGE= -> ""
LANGUAGE=ko:en -> "Accept-Language: ko, en;q=0.9, *;q=0.1"
LANGUAGE=ko LANG=en_US.UTF-8 -> "Accept-Language: ko, *;q=0.1"
LANGUAGE= LANG=en_US.UTF-8 -> "Accept-Language: en-US, *;q=0.1"
This gives git servers a chance to display remote error messages in
the user's preferred language.
Limit the number of languages to 1,000 because q-value must not be
smaller than 0.001, and limit the length of Accept-Language header to
4,000 bytes for some HTTP servers which cannot accept such long header.
Signed-off-by: Yi EungJun <eungjun.yi@navercorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, dumb http always fetched .idx files
directly into their final location, and then checked their
validity with parse_pack_index. This was refactored in
commit 750ef42 (http-fetch: Use temporary files for
pack-*.idx until verified, 2010-04-19), which uses the
following logic:
1. If we have the idx already in place, see if it's
valid (using parse_pack_index). If so, use it.
2. Otherwise, fetch the .idx to a tempfile, check
that, and if so move it into place.
3. Either way, fetch the pack itself if necessary.
However, it got step 1 wrong. We pass a NULL path parameter
to parse_pack_index, so an existing .idx file always looks
broken. Worse, we do not treat this broken .idx as an
opportunity to re-fetch, but instead return an error,
ignoring the pack entirely. This can lead to a dumb-http
fetch failing to retrieve the necessary objects.
This doesn't come up much in practice, because it must be a
packfile that we found out about (and whose .idx we stored)
during an earlier dumb-http fetch, but whose packfile we
_didn't_ fetch. I.e., we did a partial clone of a
repository, didn't need some packfiles, and now a followup
fetch needs them.
Discovery and tests by Charles Bailey <charles@hashpling.org>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply --whitespace=fix" used to be able to assume that fixing
errors will always reduce the size by e.g. stripping whitespaces at
the end of lines or collapsing runs of spaces into tabs at the
beginning of lines. An update to accomodate fixes that lengthens
the result by e.g. expanding leading tabs into spaces were made long
time ago but the logic miscounted the necessary space after such
whitespace fixes, leading to either under-allocation or over-usage
of already allocated space.
Illustrate this with a runtime sanity-check to protect us from
future breakage. The test was stolen from Kyle McKay who helped
to identify the problem.
Helped-by: "Kyle J. McKay" <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 908a320363 introduced indentation
to here documents in t3301.sh. However in one place <<-EOF was missing
-, which broke this test when run with mksh-50d. This commit fixes it.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier days, the abbreviated commit object name shown to the end
users were generated with hardcoded --abbrev=7; 56895038 (rebase
-i: respect core.abbrev, 2013-09-28) tried to make it honor the user
specified core.abbrev, but it missed the very initial invocation of
the editor.
These days, we try to use the full 40-hex object names internally to
avoid ambiguity that can arise after rebase starts running. Newly
created objects during the rebase may share the same prefix with
existing commits listed in the insn sheet. These object names are
shortened just before invoking the sequence editor to present the
insn sheet to the end user, and then expanded back to full object
names when the editor returns.
But the code still used the shortened names when preparing the insn
sheet for the very first time, resulting "7 hexdigits or more"
output to the user. Change the code to use full 40-hex commit
object names from the very beginning to make things more uniform.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical remote helper will return a `list` of refs containing a symbolic
ref HEAD, pointing to, e.g. refs/heads/master. In the case of a clone, all
the refs are being requested through `fetch` or `import`, including the
symbolic ref.
While this works properly, in some cases of a fetch, like `git fetch url`
or `git fetch origin HEAD`, or any fetch command involving a symbolic ref
without also fetching the corresponding ref it points to, the fetch command
fails with:
fatal: bad object 0000000000000000000000000000000000000000
error: <remote> did not send all necessary objects
(in the case the remote helper returned '?' values to the `list` command).
This is because there is only one ref given to fetch(), and it's not
further resolved to something at the end of fetch_with_import().
While this can be somehow handled in the remote helper itself, by adding
a refspec for the symbolic ref, and storing an explicit ref in a private
namespace, and then handling the `import` for that symbolic ref
specifically, very few existing remote helpers are actually doing that.
So, instead of requesting the exact list of wanted refs to remote helpers,
treat symbolic refs differently and request the ref they point to instead.
Then, resolve the symbolic refs values based on the pointed ref.
This assumes there is no more than one level of indirection (a symbolic
ref doesn't point to another symbolic ref).
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit 695d95d refactored the color parsing, it missed
a "return 0" when parsing literal numbers 0-8 (which
represent basic ANSI colors), leading us to report these
colors as an error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIXPERM requires that a later call to stat(2) (hence "ls -l")
faithfully reproduces what an earlier chmod(2) did. Some
filesystems cannot satisify this.
SANITY requires that a file or a directory is indeed accessible (or
inaccessible) when its permission bits would say it ought to be
accessible (or inaccessible). Running tests as root would lose this
prerequisite for obvious reasons.
Fix a few tests that misuse POSIXPERM.
t0061-run-command.sh has two uses of POSIXPERM.
- One checks that an attempt to execute a file that is marked as
unexecutable results in a failure with EACCES; I do not think
having root-ness or any other capability that busts the
filesystem permission mode bits will make you run an unexecutable
file, so this should be left as-is. The test does not have
anything to do with SANITY.
- The other one expects 'git nitfol' runs the alias when an
alias.nitfol is defined and a directory on the PATH is marked as
unreadable and unsearchable. I _think_ the test tries to reject
the alternative expectation that we want to refuse to run the
alias because it would break "no alias may mask a command" rule
if a file 'git-nitfol' exists in the unreadable directory but we
cannot even determine if that is the case. Under !SANITY that
busts the permission bits, this test no longer checks that, so it
must be protected with SANITY.
t1509-root-worktree.sh expects to be run on a / that is writable by
the user and sees if Git behaves "sensibly" when /.git is the
repository to govern a worktree that is the whole filesystem, and
also if Git behaves "sensibly" when / itself is a bare repository
with refs, objects, and friends (I find the definition of "behaves
sensibly" under these conditions hard to fathom, but it is a
different matter).
The implementation of the test is very much problematic.
- It requires POSIXPERM, but it does not do chmod or checks modes
in any way.
- It runs "rm /*" and "rm -fr /refs /objects ..." in one of the
tests, and also does "cd / && git init --bare". If done on a
live system that takes advantages of the "feature" being tested,
these obviously will clobber the system. But there is no guard
against such a breakage.
- It uses "test $UID = 0" to see rootness, which now should be
spelled "! test_have_prereq NOT_ROOT"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SANITY prerequisite is really about whether the
filesystem will respect the permissions we set, and being
root is only one part of that. But the httpd tests really
just care about not being root, as they are trying to avoid
weirdness in apache (see a1a3011 for details).
Let's switch out SANITY for a new NOT_ROOT prerequisite,
which will let us tweak SANITY more freely.
We implement NOT_ROOT by checking `id -u`, which is in POSIX
and seems to be available even on MSYS. Note that we cannot
just call this "ROOT" and ask for "!ROOT". The possible
outcomes are:
1. we know we are root
2. we know we are not root
3. we could not tell, because `id` was not available
We should conservatively treat (3) as "does not have the
prerequisite", which means that a naive negation would not
work.
Helped-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some unknown reason, the dd on my Windows box segfaults randomly,
but since recently, it does so much more often than it used to, which
makes running the test suite burdensome.
Use printf to write large files instead of dd. To emphasize that three
of the large blobs are exact copies, use cp to allocate them.
The new code makes the files a bit smaller, and they are not sparse
anymore, but the tests do not depend on these properties. We do not want
to use test-genrandom here (which is used to generate large files
elsewhere in t1050), so that the files can be compressed well (which
keeps the run-time short).
The files are now large text files, not binary files. But since they
are larger than core.bigfilethreshold they are diagnosed as binary
by Git. For this reason, the 'git diff' tests that check the output
for "Binary files differ" still pass.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to see if "tput" gives a useful result before switching TERM
to dumb and moving HOME to point to our fake location for stability
of the tests, and then use the command when coloring the output
from the tests, but there is no guarantee "tput" works after
switching HOME.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: do tests for color support after changing HOME
test-lib: use 'test ...' instead of '[ ... ]'
* rh/hide-prompt-in-ignored-directory:
git-prompt.sh: allow to hide prompt for ignored pwd
git-prompt.sh: if pc mode, immediately set PS1 to a plain prompt
Fix recent breakage in Git 2.2 that started creating info/refs and
objects/info/packs files with permission bits tighter than user's
umask.
* jk/prune-packed-server-info:
update-server-info: create info/* with mode 0666
t1301: set umask in reflog sharedrepository=group test
"git remote add $name $URL" is now allowed when "url.$URL.insteadOf"
is already defined.
* js/remote-add-with-insteadof:
Add a regression test for 'git remote add <existing> <same-url>'
git remote: allow adding remotes agreeing with url.<...>.insteadOf
"git log --grep=<string>" shows only commits with messages that
match the given string, but sometimes it is useful to be able to
show only commits that do *not* have certain messages (e.g. "show
me ones that are not FIXUP commits").
Originally, we had the invert-grep flag in grep_opt, but because
"git grep --invert-grep" does not make sense except in conjunction
with "--files-with-matches", which is already covered by
"--files-without-matches", it was moved it to revisions structure.
To have the flag there expresses the function to the feature better.
When the newly inserted two tests run, the history would have commits
with messages "initial", "second", "third", "fourth", "fifth", "sixth"
and "Second", committed in this order. The commits that does not match
either "th" or "Sec" is "second" and "initial". For the case insensitive
case only "initial" matches.
Signed-off-by: Christoph Junghans <ottxor@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code handling %(upstream:track) and %(upstream:trackshort)
assumed that it always had a valid branch that had been sanitized
earlier in populate_value(), and thus did not check the return value
of the call to stat_tracking_info().
While there is indeed some sanitization code that basically
corresponds to stat_tracking_info() returning 0 (no base branch
set), the function can also return -1 when the base branch did exist
but has since then been deleted.
In this case, num_ours and num_theirs had undefined values and a
call to `git for-each-ref --format="%(upstream:track)"` could print
spurious values such as
[behind -111794512]
[ahead 38881640, behind 5103867]
even for repositories with one single commit.
Verify stat_tracking_info()'s return value and do not print anything
if it returns -1. This behavior also matches the documentation ("has
no effect if the ref does not have tracking information associated
with it").
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Raphael Kubo da Costa <raphael.kubo.da.costa@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout-index --temp=$target $path" did not work correctly
for paths outside the current subdirectory in the project.
* es/checkout-index-temp:
checkout-index: fix --temp relative path mangling
t2004: demonstrate broken relative path printing
t2004: standardize file naming in symlink test
t2004: drop unnecessary write-tree/read-tree
t2004: modernize style
The logic in "git bisect bad HEAD" etc. to avoid forcing the test
of the common ancestor of bad and good commits was broken.
* cc/bisect-rev-parsing:
bisect: add test to check that revs are properly parsed
bisect: parse revs before passing them to check_expected_revs()
When receive.denyCurrentBranch is set to updateInstead, a push that
tries to update the branch that is currently checked out is accepted
only when the index and the working tree exactly matches the
currently checked out commit, in which case the index and the
working tree are updated to match the pushed commit. Otherwise the
push is refused.
This hook can be used to customize this "push-to-deploy" logic. The
hook receives the commit with which the tip of the current branch is
going to be updated, and can decide what kind of local changes are
acceptable and how to update the index and the working tree to match
the updated tip of the current branch.
For example, the hook can simply run `git read-tree -u -m HEAD "$1"`
in order to emulate 'git fetch' that is run in the reverse direction
with `git push`, as the two-tree form of `read-tree -u -m` is
essentially the same as `git checkout` that switches branches while
keeping the local changes in the working tree that do not interfere
with the difference between the branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds tests for the atomic push option.
The first four tests check if the atomic option works in
good conditions and the last three patches check if the atomic
option prevents any change to be pushed if just one ref cannot
be updated.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.submodule when set to log produces output which git-am cannot
handle. Ignore this setting when generating patch output.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am will break when using diff.submodule=log; add some test cases
to illustrate this breakage as simply as possible. There are
currently two ways this can fail:
* With errors ("unrecognized input"), if only change
* Silently (no submodule change), if other files change
Test for both conditions and ensure without diff.submodule this works.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" normally identifies itself via X-Mailer: header
in the message it sends out. A new command line flag allows the
user to squelch the header.
* lh/send-email-hide-x-mailer:
test/send-email: --[no-]xmailer tests
send-email: add --[no-]xmailer option
"git send-email" did not handle RFC 2047 encoded headers quite
right.
* rd/send-email-2047-fix:
send-email: handle adjacent RFC 2047-encoded words properly
send-email: align RFC 2047 decoding more closely with the spec
Traditionally we tried to avoid interpreting date strings given by
the user as future dates, e.g. GIT_COMMITTER_DATE=2014-12-10 when
used early November 2014 was taken as "October 12, 2014" because it
is likely that a date in the future, December 10, is a mistake.
Loosen this and do not tiebreak by future-ness of the date when
(1) ISO-like format is used, and
(2) the string can make sense interpreted as both y-m-d and y-d-m.
* jk/approxidate-avoid-y-d-m-over-future-dates:
approxidate: allow ISO-like dates far in the future
pass TIME_DATE_NOW to approxidate future-check
The lockfile API can get confused which file to clean up when the
process moved the $cwd after creating a lockfile.
* nd/lockfile-absolute:
lockfile.c: store absolute path
The commented output used to blindly add a SP before the payload
line, resulting in "# \t<indented text>\n" when the payload began
with a HT. Instead, produce "#\t<indented text>\n".
* jc/strbuf-add-lines-avoid-sp-ht-sequence:
strbuf_add_commented_lines(): avoid SP-HT sequence in commented lines
The report from "git checkout" on a branch that builds on another
local branch by setting its branch.*.merge to branch name (not a
full refname) incorrectly said that the upstream is gone.
* jc/checkout-local-track-report:
checkout: report upstream correctly even with loosely defined branch.*.merge
If ncurses needs ~/.terminfo for the current $TERM, then tput will
succeed before changing HOME to $TRASH_DIRECTORY but fail afterward.
Move the tests that determine whether there is color support after
changing HOME so that color=t is set if and only if tput would succeed
when say_color() is run.
Note that color=t is now set after --no-color is processed, so the
condition to set color=t has changed: it is now set only if
color has not already been set to the empty string by --no-color.
This disables color support for those that need ~/.terminfo for
their TERM, but it's better than filling the screen with:
tput: unknown terminal "custom-terminal-name-here"
An alternative would be to symlink or copy the user's terminfo
database into $TRASH_DIRECTORY, but this is tricky due to the lack of
a standard name for the terminfo database (for example, instead of a
~/.terminfo directory, NetBSD uses a ~/.terminfo.cdb database file).
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optionally set __git_ps1 to display nothing when present working
directory is ignored, triggered by the new environment variable
GIT_PS1_HIDE_IF_PWD_IGNORED. This environment variable may be
overridden on any repository by setting bash.hideIfPwdIgnored to
"false". In the absence of GIT_PS1_HIDE_IF_PWD_IGNORED this change
has no effect.
Many people manage e.g. dotfiles in their home directory with git.
This causes the prompt generated by __git_ps1 to refer to that "top
level" repo while working in any descendant directory. That can be
distracting, so this patch helps one shut off that noise.
Signed-off-by: Jess Austin <jess.austin@gmail.com>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to d38379e (make update-server-info more robust, 2014-09-13),
we used a straight "fopen" to create the info/refs and
objects/info/packs files, which creates the file using mode 0666
(less the default umask).
In d38379e, we switched to creating the file with mkstemp to get a
unique filename. But mkstemp also uses the more restrictive 0600
mode to create the file. This was an unintended side effect that we
did not want, and causes problems when the repository is served by a
different user than the one running update-server-info (it is not
readable by a dumb http server running as `www`, for example).
We can fix this by using git_mkstemp_mode and specifying 0666 to
make sure that the umask is honored.
Note that we could also say "just use core.sharedrepository", as we
do call adjust_shared_perm on the result before renaming it into
place. But that should not be necessary as long as everybody
involved is using permissive umask to allow HTTP server to read
necessary files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t1301 script sets the umask globally before many of the
tests. Most of the tests that care about the umask then set
it explicitly at the start of the test. However, one test
does not, and relies on the 077 umask setting from earlier
tests. This is fragile and can break if another test is
added in between. Let's be more explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our is_hfs_dotgit function relies on the hackily-implemented
next_hfs_char to give us the next character that an HFS+
filename comparison would look at. It's hacky because it
doesn't implement the full case-folding table of HFS+; it
gives us just enough to see if the path matches ".git".
At the end of next_hfs_char, we use tolower() to convert our
32-bit code point to lowercase. Our tolower() implementation
only takes an 8-bit char, though; it throws away the upper
24 bits. This means we can't have any false negatives for
is_hfs_dotgit. We only care about matching 7-bit ASCII
characters in ".git", and we will correctly process 'G' or
'g'.
However, we _can_ have false positives. Because we throw
away the upper bits, code point \u{0147} (for example) will
look like 'G' and get downcased to 'g'. It's not known
whether a sequence of code points whose truncation ends up
as ".git" is meaningful in any language, but it does not
hurt to be more accurate here. We can just pass out the full
32-bit code point, and compare it manually to the upper and
lowercase characters we care about.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout-index --temp only properly prints relative paths which are
descendants of the current directory. Paths in ancestor or sibling
directories (or their children) are often printed in mangled form. For
example:
mkdir a bbb &&
>file &&
>bbb/file &&
git update-index --add file bbb/file &&
cd a &&
git checkout-index --temp ../file ../bbb/file
prints:
.merge_file_ooblek le
.merge_file_igloo0 b/file
rather than the correct:
.merge_file_ooblek ../file
.merge_file_igloo0 ../bbb/file
Internally, given the above example, checkout-index prefixes each input
argument with the name of the current directory ("a/", in this case),
and then assumes that it can simply skip forward by strlen("a/") bytes
to recover the original name. This works for files in the current
directory or its descendants, but fails for files in ancestors or
siblings (or their children) due to path normalization.
For instance, given "../file", "a/" is prepended, giving "a/../file".
Path normalization folds out "a/../", resulting in "file". Attempting
to recover the original name by skipping strlen("a/") bytes gives the
incorrect "le" rather than the desired "../file".
Fix this by taking advantage of write_name_quoted_relative() to recover
the original name properly, rather than assuming that it can be
recovered by skipping strlen(prefix) bytes.
As a bonus, this also fixes a bug in which checkout-index --temp
accessed and printed memory beyond the end-of-string. For instance,
within a subdirectory named "subdirectory", and given argument
"../file", prefixing would give "subdirectory/../file", which would
become "file" after normalization. checkout-index would then attempt to
recover the original name by skipping strlen("subdirectory/") bytes of
"file", which placed it well beyond end-of-string. Despite this error,
it often appeared to give the correct result, but only due to an
accident of implementation which left an apparently correct copy of the
path in memory following the normalized value. In particular, handed
"subdirectory/../file", in-place processing by normalize_path_copy_len()
resulted in "file\0rectory/../file". When checkout-index skipped
strlen("subdirectory/") bytes, it ended up back at "../file" and thus
appeared to give the correct answer, despite being past end-of-string.
Reported-by: Russ Cox <rsc@golang.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout-index --temp only properly prints relative paths which are
descendants of the current directory. Paths in ancestor or sibling
directories (or their children) are often printed in mangled form. For
example:
mkdir a bbb &&
>file &&
>bbb/file &&
git update-index --add file bbb/file &&
cd a &&
git checkout-index --temp ../file ../bbb/file
prints:
.merge_file_ooblek le
.merge_file_igloo0 b/file
rather than the correct:
.merge_file_ooblek ../file
.merge_file_igloo0 ../bbb/file
Unfortunately, testing is complicated slightly by relative paths
sometimes _appearing_ to be printed correctly, but this is an accident
of implementation in which a "correct" copy of the string exists in
memory beyond the end of the real string, and that "correct" copy gets
printed. This test takes care to avoid the accidentally "correct"
behavior by testing with a filename longer than the directory name in
which checkout-index is invoked.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "symlink" test to use the common file naming scheme so that its
temporary files can be cleaned up by the "rm -f path*" idiom employed by
other tests in this script.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike earlier tests which reference several trees prepared by "setup",
no other tests utilize the tree from the "symlink" test, so there is no
need to write it (or read it back immediately).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular:
* indent test body
* place test description on same line as test_expect_*
* place closing quote on its own line
* name output file "actual" rather than "out"
* name setup test "setup" rather than "preparation"
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-ref --stdin"'s verify command did not work well when
<oldvalue>, which is documented as optional, was missing.
* mh/update-ref-verify:
update-ref: fix "verify" command with missing <oldvalue>
t1400: add some more tests of "update-ref --stdin"'s verify command
The awk statements previously used in this test weren't compatible
with the native versions of awk on Solaris:
echo "dir" | /bin/awk -v c=0 '$1 {++c} END {print c}'
awk: syntax error near line 1
awk: bailing out near line 1
echo "dir" | /usr/xpg4/bin/awk -v c=0 '$1 {++c} END {print c}'
0
Even though we do not cater to tools in /usr/bin on Solaris that
have and are overridden by corresponding ones in /usr/xpg?/bin,
in this case, even the XPG version does not work correctly.
With GNU awk for comparison:
echo "dir" | /opt/csw/gnu/awk -v c=0 '$1 {++c} END {print c}'
1
which is what this test expects (and is in line with POSIX; non-empty
string is true and an empty string is false).
Work this issue around by using $1 != "" to state more explicitly
that we are skipping empty lines.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent GPG changes the keyring format and drops support for RFC1991
formatted signatures, breaking our existing tests.
* ch/new-gpg-drops-rfc-1991:
tests: make comment on GPG keyring match the code
tests: squelch noise from GPG machinery set-up
tests: replace binary GPG keyrings with ASCII-armored keys
tests: skip RFC1991 tests for gnupg 2.1
tests: create gpg homedir on the fly
"git push" and "git fetch" did not communicate an overlong refname
correctly.
* jk/always-allow-large-packets:
pkt-line: allow writing of LARGE_PACKET_MAX buffers
"diff-highlight" filter (in contrib/) allows its color output
to be customized via configuration variables.
* jk/colors:
parse_color: drop COLOR_BACKGROUND macro
diff-highlight: allow configurable colors
parse_color: recognize "no$foo" to clear the $foo attribute
parse_color: support 24-bit RGB values
parse_color: refactor color storage
New tag object format validation added in 2.2 showed garbage
after a tagname it reported in its error message.
* js/fsck-tag-validation:
index-pack: terminate object buffers with NUL
fsck: properly bound "invalid tag name" error message
"git branch -d" (delete) and "git branch -m" (move) learned to
honor "-f" (force) flag; unlike many other subcommands, the way to
force these have been with separate "-D/-M" options, which was
inconsistent.
* mg/branch-d-m-f:
branch: allow -f with -m and -d
t3200-branch: test -M
The code that reads the reflog from the newer to the older entries
did not handle an entry that crosses a boundary of block it uses to
read them correctly.
* jk/for-each-reflog-ent-reverse:
for_each_reflog_ent_reverse: turn leftover check into assertion
for_each_reflog_ent_reverse: fix newlines on block boundaries
Credential helpers are asked in turn until one of them give
positive response, which is cumbersome to turn off when you need to
run Git in an automated setting. The credential helper interface
learned to allow a helper to say "stop, don't ask other helpers."
Also GIT_TERMINAL_PROMPT environment can be set to false to disable
our built-in prompt mechanism for passwords.
* jk/credential-quit:
prompt: respect GIT_TERMINAL_PROMPT to disable terminal prompts
credential: let helpers tell us to quit
"git ls-tree" does not support path selection based on negative
pathspecs, but did not error out when negative pathspecs are given.
* nd/ls-tree-pathspec:
t3102: style modernization
t3102: document that ls-tree does not yet support negated pathspec
ls-tree: disable negative pathspec because it's not supported
ls-tree: remove path filtering logic in show_tree
tree.c: update read_tree_recursive callback to pass strbuf as base
"git push" into a repository with a working tree normally refuses
to modify the branch that is checked out. The command learned to
optionally do an equivalent of "git reset --hard" only when there
is no change to the working tree and the index instead, which would
be useful to "deploy" by pushing into a repository.
* js/push-to-deploy:
t5516: more tests for receive.denyCurrentBranch=updateInstead
receive-pack: add another option for receive.denyCurrentBranch
"git am" learned "--message-id" option to copy the message ID of
the incoming e-mail to the log message of resulting commit.
* pb/am-message-id-footer:
git-am: add --message-id/--no-message-id
git-mailinfo: add --message-id
"git interpret-trailers" learned to properly handle the
"Conflicts:" block at the end.
* cc/interpret-trailers-more:
trailer: add test with an old style conflict block
trailer: reuse ignore_non_trailer() to ignore conflict lines
commit: make ignore_non_trailer() non static
merge & sequencer: turn "Conflicts:" hint into a comment
builtin/commit.c: extract ignore_non_trailer() helper function
merge & sequencer: unify codepaths that write "Conflicts:" hint
builtin/merge.c: drop a parameter that is never used
Some tests that depend on perl lacked PERL prerequisite to protect
them, breaking build with NO_PERL configuration.
* jk/no-perl-tests:
t960[34]: mark cvsimport tests as requiring perl
t0090: mark add-interactive test with PERL prerequisite
Git 2.0 was supposed to make the "simple" mode for the default of
"git push", but it didn't.
* jk/push-simple:
push: truly use "simple" as default, not "upstream"
"git init" (hence "git clone") initialized the per-repository
configuration file .git/config with x-bit by mistake.
* mh/config-flip-xbit-back-after-checking:
create_default_files(): don't set u+x bit on $GIT_DIR/config
"git config --get-color" did not parse its command line arguments
carefully.
* jk/colors-fix:
t4026: test "normal" color
config: fix parsing of "git config --get-color some.key -1"
docs: describe ANSI 256-color mode
"git checkout $treeish $path", when $path in the index and the
working tree already matched what is in $treeish at the $path,
still overwrote the $path unnecessarily.
* jk/checkout-from-tree:
checkout $tree: do not throw away unchanged index entries
Now that the index can block pathnames that can be mistaken
to mean ".git" on NTFS and FAT32, it would be helpful for
fsck to notice such problematic paths. This lets servers
which use receive.fsckObjects block them before the damage
spreads.
Note that the fsck check is always on, even for systems
without core.protectNTFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
NTFS.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on NTFS themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git or git~1, meaning mischief is almost
certainly what the tree author had in mind).
Ideally these would be controlled by a separate
"fsck.protectNTFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the index can block pathnames that case-fold to
".git" on HFS+, it would be helpful for fsck to notice such
problematic paths. This lets servers which use
receive.fsckObjects block them before the damage spreads.
Note that the fsck check is always on, even for systems
without core.protectHFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
HFS+.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on HFS+ themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git with invisible Unicode code-points mixed
in, meaning mischief is almost certainly what the tree
author had in mind).
Ideally these would be controlled by a separate
"fsck.protectHFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We complain about ".git" in a tree because it cannot be
loaded into the index or checked out. Since we now also
reject ".GIT" case-insensitively, fsck should notice the
same, so that errors do not propagate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check that fsck notices and complains about confusing
paths in trees. However, there are a few shortcomings:
1. We check only for these paths as file entries, not as
intermediate paths (so ".git" and not ".git/foo").
2. We check "." and ".." together, so it is possible that
we notice only one and not the other.
3. We repeat a lot of boilerplate.
Let's use some loops to be more thorough in our testing, and
still end up with shorter code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not allow ".git" to enter into the index as a path
component, because checking out the result to the working
tree may causes confusion for subsequent git commands.
However, on case-insensitive file systems, ".Git" or ".GIT"
is the same. We should catch and prevent those, too.
Note that technically we could allow this for repos on
case-sensitive filesystems. But there's not much point. It's
unlikely that anybody cares, and it creates a repository
that is unexpectedly non-portable to other systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should prevent nonsense paths from entering the index in
the first place, as they can cause confusing results if they
are ever checked out into the working tree. We already do
so, but we never tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GnuPG homedir is generated on the fly and keys are imported from
armored key file. Make comment match available key info and new key
generation procedure.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The RFC says that they are to be concatenated after decoding (i.e. the
intervening whitespace is ignored).
Signed-off-by: Роман Донченко <dpb@corrigendum.ru>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.0 was supposed to make the "simple" mode for the default of
"git push", but it didn't.
* jk/push-simple:
push: truly use "simple" as default, not "upstream"
Some tests that depend on perl lacked PERL prerequisite to protect
them, breaking build with NO_PERL configuration.
* jk/no-perl-tests:
t960[34]: mark cvsimport tests as requiring perl
t0090: mark add-interactive test with PERL prerequisite
It is distracting to let the GPG message while setting up the test
gpghome leak into the test output, especially without running these
tests with "-v" option.
The splitting of RFC1991 prerequiste part is about future-proofing.
When we want to define other kinds of specific prerequisites in the
future, we'd prefer to see it done separately from the basic set-up
code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Importing PGP key public and security ring works, but we do not have
all secret keys in one binary blob and all public keys in another.
Instead import public and secret keys for one key pair from a text
file that holds ASCII-armored export of them.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GnuPG >= 2.1.0 no longer supports RFC1991, so skip these tests.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GnuPG 2.1 homedir looks different, so just create it on the fly by
importing needed private and public keys and ownertrust.
This solves an issue with gnupg 2.1 running interactive pinentry
when old secret key is present.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git is compiled with "-fsanitize=address" (using clang
or gcc >= 4.8), all invocations of git will check for buffer
overflows. This is similar to running with valgrind, except
that it is more thorough (because of the compiler support,
function-local buffers can be checked, too) and runs much
faster (making it much less painful to run the whole test
suite with the checks turned on).
Unlike valgrind, the magic happens at compile-time, so we
don't need the same infrastructure in the test suite that we
did to support --valgrind. But there are two things we can
help with:
1. On some platforms, the leak-detector is on by default,
and causes every invocation of "git init" (and thus
every test script) to fail. Since running git with
the leak detector is pointless, let's shut it off
automatically in the tests, unless the user has already
configured it.
2. When apache runs a CGI, it clears the environment of
unknown variables. This means that the $ASAN_OPTIONS
config doesn't make it to git-http-backend, and it
dies due to the leak detector. Let's mark the variable
as OK for apache to pass.
With these two changes, running
make CC=clang CFLAGS=-fsanitize=address test
works out of the box.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "git update-ref --stdin" was given a "verify" command with no
"<newvalue>" at all (not even zeros), the code was mistakenly setting
have_old=0 (and leaving old_sha1 uninitialized). But this is
incorrect: this command is supposed to verify that the reference
doesn't exist. So in this case we really need old_sha1 to be set to
null_sha1 and have_old to be set to 1.
Moreover, since have_old was being set to zero, *no* check of the old
value was being done, so the new value of the reference was being set
unconditionally to the value in new_sha1. new_sha1, in turn, was set
to null_sha1 in the expectation that that was the old value and it
shouldn't be changed. But because the precondition was not being
checked, the result was that the reference was being deleted
unconditionally.
So, if <oldvalue> is missing, set have_old unconditionally and set
old_sha1 to null_sha1.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two of the tests fail because
verify refs/heads/foo
with no argument (not even zeros) actually *deletes* refs/heads/foo.
This problem will be fixed in the next commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we send out pkt-lines with refnames, we use a static
1000-byte buffer. This means that the maximum size of a ref
over the git protocol is around 950 bytes (the exact size
depends on the protocol line being written, but figure on a sha1
plus some boilerplate).
This is enough for any sane workflow, but occasionally odd
things happen (e.g., a bug may create a ref "foo/foo/foo/..."
accidentally). With the current code, you cannot even use
"push" to delete such a ref from a remote.
Let's switch to using a strbuf, with a hard-limit of
LARGE_PACKET_MAX (which is specified by the protocol). This
matches the size of the readers, as of 74543a0 (pkt-line:
provide a LARGE_PACKET_MAX static buffer, 2013-02-20).
Versions of git older than that will complain about our
large packets, but it's really no worse than the current
behavior. Right now the sender barfs with "impossibly long
line" trying to send the packet, and afterwards the reader
will barf with "protocol error: bad line length %d", which
is arguably better anyway.
Note that we're not really _solving_ the problem here, but
just bumping the limits. In theory, the length of a ref is
unbounded, and pkt-line can only represent sizes up to
65531 bytes. So we are just bumping the limit, not removing
it. But hopefully 64K should be enough for anyone.
As a bonus, by using a strbuf for the formatting we can
eliminate an unnecessary copy in format_buf_write.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-f/--force is the standard way to force an action, and is used by branch
for the recreation of existing branches, but not for deleting unmerged
branches nor for renaming to an existing branch.
Make "-m -f" equivalent to "-M" and "-d -f" equivalent to" -D", i.e.
allow -f/--force to be used with -m/-d also.
For the list modes, "-f" is simply ignored.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change allows git-svn to support setting subversion properties.
It is useful for manually setting properties when committing to a
subversion repo that *requires* properties to be set without requiring
moving your changeset to separate subversion checkout in order to
set props.
This change is initially from David Fraser, appearing at:
http://mid.gmane.org/1927112650.1281253084529659.JavaMail.root@klofta.sjsoft.com>
They are now forward-ported to most recent git along with fixes to
deal with files in subdirectories.
Style and functional changes from Eric Wong have been taken
in their entirety from:
http://mid.gmane.org/20141201094911.GA13931@dcvr.yhbt.net
There is a nit to point out: the code does not support
adding props unless there are also content changes to the files as
well. This is demonstrated in the testcase.
[ew - simplify Git.pm usage for check-attr
- improve shell portability for tests
- minor phrasing changes in commit message]
Signed-off-by: David Fraser <davidf@sjsoft.com>
Signed-off-by: Alfred Perlstein <alfred@freebsd.org>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When we detect an invalid tag-name header in a tag object,
like, "tag foo bar\n", we feed the pointer starting at "foo
bar" to a printf "%s" formatter. This shows the name, as we
want, but then it keeps printing the rest of the tag buffer,
rather than stopping at the end of the line.
Our tests did not notice because they look only for the
matching line, but the bug is that we print much more than
we wanted to. So we also adjust the test to be more exact.
Note that when fscking tags with "index-pack --strict", this
is even worse. index-pack does not add a trailing
NUL-terminator after the object, so we may actually read
past the buffer and print uninitialized memory. Running
t5302 with valgrind does notice the bug for that reason.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the file content, eol parameters and .gitattributes
"git add" may give a warning when the eol of a file will change when
the file is checked out again.
There are 2 different warnings, either "CRLF will be replaced..." or
"LF will be replaced...". Let t0027 check for these warnings by
adding new parameters to create_file_in_repo(), which tells what
warnings are expected.
When a file has eol=lf or eol=crlf in .gitattributes, it is handled
as text and should be normalized. Add tests for these cases that
were not covered.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A request to store an empty note via "git notes" meant to remove
note from the object but with --allow-empty we will store a (surprise!)
note that is empty. In the longer run, we might want to deprecate
the somewhat unintuitive "emptying means deletion" behaviour.
* jh/empty-notes:
t3301: modernize style
notes: empty notes should be shown by 'git log'
builtin/notes: add --allow-empty, to allow storing empty notes
builtin/notes: split create_note() to clarify add vs. remove logic
builtin/notes: simplify early exit code in add()
builtin/notes: refactor note file path into struct note_data
builtin/notes: improve naming
t3301: verify that 'git notes' removes empty notes by default
builtin/notes: fix premature failure when trying to add the empty blob
"git checkout $treeish $path", when $path in the index and the
working tree already matched what is in $treeish at the $path,
still overwrote the $path unnecessarily.
* jk/checkout-from-tree:
checkout $tree: do not throw away unchanged index entries
When we read a reflog file in reverse, we read whole chunks
of BUFSIZ bytes, then loop over the buffer, parsing any
lines we find. We find the beginning of each line by looking
for the newline from the previous line. If we don't find
one, we know that we are either at the beginning of
the file, or that we have to read another block.
In the latter case, we stuff away what we have into a
strbuf, read another block, and continue our parse. But we
missed one case here. If we did find a newline, and it is at
the beginning of the block, we must also stuff that newline
into the strbuf, as it belongs to the block we are about to
read.
The minimal fix here would be to add this special case to
the conditional that checks whether we found a newline.
But we can make the flow a little clearer by rearranging a
bit: we first handle lines that we are going to show, and
then at the end of each loop, stuff away any leftovers if
necessary. That lets us fold this special-case in with the
more common "we ended in the middle of a line" case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are trying to fill a credential, we loop over the
set of defined credential-helpers, then fall back to running
askpass, and then finally prompt on the terminal. Helpers
which cannot find a credential are free to tell us nothing,
but they cannot currently ask us to stop prompting.
This patch lets them provide a "quit" attribute, which asks
us to stop the process entirely (avoiding running more
helpers, as well as the askpass/terminal prompt).
This has a few possible uses:
1. A helper which prompts the user itself (e.g., in a
dialog) can provide a "cancel" button to the user to
stop further prompts.
2. Some helpers may know that prompting cannot possibly
work. For example, if their role is to broker a ticket
from an external auth system and that auth system
cannot be contacted, there is no point in continuing
(we need a ticket to authenticate, and the user cannot
provide one by typing it in).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use <<-\END_OF_HERE_DOCUMENT to allow indenting the HERE document to
make it clear where each test begins and ends, and relieve readers
from having to worry about variable substitution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-tree uses read_tree_recursive() which already does path filtering
using pathspec. No need to filter one more time based on prefix
only. "ls-tree ../somewhere" does not work because of
this. write_name_quotedpfx() can now be retired because nobody else
uses it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit baa37bff ("mv: allow renaming to fix case on case
insensitive filesystems", 08-05-2014), the 'git mv' command has
been able to rename a file, to one which differs only in case,
on a case insensitive filesystem.
This results in the 'rename (case change)' test, which used to fail
prior to this commit, to now (unexpectedly) pass. Mark this test as
passing.
[jc: Ramsay's tests on Cygwin, Eric's on Mac OS X]
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Tested-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan for the push.default transition had all along been
to use the "simple" method rather than "upstream" as a
default if the user did not specify their own push.default
value. Commit 11037ee (push: switch default from "matching"
to "simple", 2013-01-04) tried to implement that by moving
PUSH_DEFAULT_UNSPECIFIED in our switch statement to
fall-through to the PUSH_DEFAULT_SIMPLE case.
When the commit that became 11037ee was originally written,
that would have been enough. We would fall through to
calling setup_push_upstream() with the "simple" parameter
set to 1. However, it was delayed for a while until we were
ready to make the transition in Git 2.0.
And in the meantime, commit ed2b182 (push: change `simple`
to accommodate triangular workflows, 2013-06-19) threw a
monkey wrench into the works. That commit drops the "simple"
parameter to setup_push_upstream, and instead checks whether
the global "push_default" is PUSH_DEFAULT_SIMPLE. This is
right when the user has explicitly configured push.default
to simple, but wrong when we are a fall-through for the
"unspecified" case.
We never noticed because our push.default tests do not cover
the case of the variable being totally unset; they only
check the "simple" behavior itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one tests only the case where a path to be updated by
the push-to-deploy has an incompatible change in the target's
working tree that has already been added to the index, but the
feature itself wants to require the working tree to be a lot cleaner
than what is tested. Add a handful more tests to protect the
feature from future changes that mistakenly (from the viewpoint of
the inventor of the feature) loosens the cleanliness requirement,
namely:
- A change only to the working tree but not to the index is still a
change to be protected;
- An untracked file in the working tree that would be overwritten
by a push-to-deploy needs to be protected;
- A change that happens to make a file identical to what is being
pushed is still a change to be protected (i.e. the feature's
cleanliness requirement is more strict than that of checkout).
Also, test that a stat-only change to the working tree is not a
reason to reject a push-to-deploy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When synchronizing between working directories, it can be handy to update
the current branch via 'push' rather than 'pull', e.g. when pushing a fix
from inside a VM, or when pushing a fix made on a user's machine (where
the developer is not at liberty to install an ssh daemon let alone know
the user's password).
The common workaround – pushing into a temporary branch and then merging
on the other machine – is no longer necessary with this patch.
The new option is:
'updateInstead':
Update the working tree accordingly, but refuse to do so if there
are any uncommitted changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parse the option and pass it directly to git-mailinfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option adds the content of the Message-Id header at the end of the
commit message prepared by git-mailinfo. This is useful in order to
associate commit messages automatically with mailing list discussions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two general shell script codingstyles around here-text.
- Quote the <<\END_OF_HERE_TEXT string when there is no parameter
substitution going on to reduce cognitive load of the reader.
- Indent the text with <<-\END_OF_HERE_TEXT when able to make it
easier to spot boundaries of the tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two general shell script codingstyles.
- No SP between redirection operator and its target
- One SP on both sides of () in "name () {" that begins a shell function
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use write_script. The resulting patch makes it a lot easier
to understand what the written script is doing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The thread at http://thread.gmane.org/gmane.comp.version-control.git/257392
details problems when applying patches with "git am" in a repository with
CRLF line endings. In the example in the thread, the repository originated
from "git-svn" so it is not possible to use core.eol and friends on it.
Right now, the best option is to use "git am --keep-cr". However, when
a patch create new files, the patch application process will reject the
new file because it finds a "/dev/null\r" string instead of "/dev/null".
The problem is that SMTP transport is CRLF-unsafe. Sending a patch by
email is the same as passing it through "dos2unix | unix2dos". The newly
introduced CRLFs are normally transparent because git-am strips them. The
keepcr=true setting preserves them, but it is mostly working by chance
and it would be very problematic to have a "git am" workflow in a
repository with mixed LF and CRLF line endings.
The MIME solution to this is the quoted-printable transfer enconding.
This is not something that we want to enable by default, since it makes
received emails horrible to look at. However, it is a very good match
for projects that store CRLF line endings in the repository.
The only disadvantage of quoted-printable is that quoted-printable
patches fail to apply if the maintainer uses "git am --keep-cr". This
is because the decoded patch will have two carriage returns at the end
of the line. Therefore, add support for base64 transfer encoding too,
which makes received emails downright impossible to look at outside
a MUA, but really just works.
The patch covers all bases, including users that still live in the late
80s, by also providing a 7bit content transfer encoding that refuses
to send emails with non-ASCII character in them. And finally, "8bit"
will add a Content-Transfer-Encoding header but otherwise do nothing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In their effort to emulate POSIX as close as possible, the MSYS tools
and Cygwin treat the file name "foo.exe" as "foo" when the latter is
asked for, but not present, but the former is present.
Following this rule, 'cp /bin/sh a/bin' actually copies the file
/bin/sh.exe, so that we now have a/bin/sh.exe in the repository. This
difference did not matter in the tests in the past because we were only
interested in the equality of contents generated in various ways. But
recently added tests check file names, in particular, the presence of
"a/bin/sh". This test fails on Windows, as we do not have a file by this
name, but "a/bin/sh.exe".
Use test-genrandom to generate the large binary file in the repository
under the expected name.
We could change the guilty line to 'cat /bin/sh >a/bin/sh', but it is
better for test reproducibility to ensure that the test data is the same
across platforms, which test-genrandom can guarantee.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We require use of test_must_fail to check expected non-zero exit by
Git itself, but discourage test_must_fail to be used for checking
exit status of non Git commands that are supplied by the system.
The current text explains the reason for the former but not the
latter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add foo bar" adds neither foo nor bar when bar is ignored, but dies
to let the user recheck their command invocation. This becomes less
helpful when "git add foo.*" is subject to shell expansion and some of
the expanded files are ignored.
"git add --ignore-errors" is supposed to ignore errors when indexing
some files and adds the others. It does ignore errors from actual
indexing attempts, but does not ignore the error "file is ignored" as
outlined above. This is unexpected.
Change "git add foo bar" to add foo when bar is ignored, but issue
a warning and return a failure code as before the change.
That is, in the case of trying to add ignored files we now act the same
way (with or without "--ignore-errors") in which we act for more
severe indexing errors when "--ignore-errors" is specified.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can turn on ANSI text attributes like "reverse" by
putting "reverse" in your color spec. However, you cannot
ask to turn reverse off.
For common cases, this does not matter. You would turn on
"reverse" at the start of a colored section, and then clear
all attributes with a "reset". However, you may wish to turn
on some attributes, then selectively disable others. For
example:
git log --format="%C(bold ul yellow)%h%C(noul) %s"
underlines just the hash, but without the need to re-specify
the rest of the attributes. This can also help third-party
programs, like contrib/diff-highlight, that want to turn
some attribute on/off without disrupting existing coloring.
Note that some attribute specifications are probably
nonsensical (e.g., "bold nobold"). We do not bother to flag
such constructs, and instead let the terminal sort it out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some terminals (like XTerm) allow full 24-bit RGB color
specifications using an extension to the regular ANSI color
scheme. Let's allow users to specify hex RGB colors,
enabling the all-important feature of hot pink ref
decorations:
git log --format="%h%C(#ff69b4)%d%C(reset) %s"
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user specifiers "normal" for a foreground color, this
should be a noop (while this may sound useless, it is the
only way to specify an unchanged foreground color followed
by a specific background color).
We also check that color "-1" does the same thing. This is
not documented, but has worked forever, so let's make sure
we keep supporting it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-cvsimport is written in perl, which understandably
causes the tests to fail if you build with NO_PERL (which
will avoid building cvsimport at all). The earlier cvsimport
tests in t9600-t9602 are all marked with a PERL
prerequisite, but these ones are not.
The one in t9603 was likely not noticed because it is an
expected failure anyway.
The ones in t9604 have been around for a long time, but it
is likely that the combination of NO_PERL and having cvsps
installed is rare enough that nobody noticed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add-interactive system is built in perl. If you build
with NO_PERL, running "git commit --interactive" will exit
with an error and the test will fail.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since time immemorial, the test of whether to set "core.filemode"
has been done by trying to toggle the u+x bit on $GIT_DIR/config,
which we know always exists, and then testing whether the change
"took". I find it somewhat odd to use the config file for this
test, but whatever.
The test code didn't set the u+x bit back to its original state
itself, instead relying on the subsequent call to git_config_set()
to re-write the config file with correct permissions.
But ever since
daa22c6f8d config: preserve config file permissions on edits (2014-05-06)
git_config_set() copies the permissions from the old config file to
the new one. This is a good change in and of itself, but it
invalidates the create_default_files()'s assumption, causing "git
init" to leave the executable bit set on $GIT_DIR/config.
Reset the permissions on $GIT_DIR/config when we are done with the
test in create_default_files().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
run_merge_tool() was not setting $status, which prevented the
exit code for builtin tools from being forwarded to the caller.
Capture the exit status and add a test to guarantee the behavior.
Reported-by: Adria Farres <14farresa@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make this test script appear somewhat less old-fashioned:
- Use test helper functions:
- write_script
- test_commit
- test_write_lines
- test_line_count
- test_config
- test_unconfig
- test_path_is_missing
- Remove whitespace between redirection operators and their targets.
- Move preparation of "expect" files into tests.
- Rename "output" files to "actual".
- More consistent quoting, especially around commands that might
expand to nothing.
- More visibility of important whitespace with ${indent}.
- Combine pairs of tests that unnecessarily split setup and verification.
Improved-by: Eric Sunshine <sunshine@sunshineco.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Michael Blume <blume.mike@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing approxidate strings and we find three
numbers separate by one of ":/-.", we guess that it may be a
date. We feed the numbers to match_multi_number, which
checks whether it makes sense as a date in various orderings
(e.g., dd/mm/yy or mm/dd/yy, etc).
One of the checks we do is to see whether it is a date more
than 10 days in the future. This was added in 38035cf (date
parsing: be friendlier to our European friends.,
2006-04-05), and lets us guess that if it is currently April
2014, then "10/03/2014" is probably March 10th, not October
3rd.
This has a downside, though; if you want to be overly
generous with your "--until" date specification, we may
wrongly parse "2014-12-01" as "2014-01-12" (because the
latter is an in-the-past date). If the year is a future year
(i.e., both are future dates), it gets even weirder. Due to
the vagaries of approxidate, months _after_ the current date
(no matter the year) get flipped, but ones before do not.
This patch drops the "in the future" check for dates of this
form, letting us treat them always as yyyy-mm-dd, even if
they are in the future. This does not affect the normal
dd/mm/yyyy versus mm/dd/yyyy lookup, because this code path
only kicks in when the first number is greater than 70
(i.e., it must be a year, and cannot be either a date or a
month).
The one possible casualty is that "yyyy-dd-mm" is less
likely to be chosen over "yyyy-mm-dd". That's probably OK,
though because:
1. The difference happens only when the date is in the
future. Already we prefer yyyy-mm-dd for dates in the
past.
2. It's unclear whether anybody even uses yyyy-dd-mm
regularly. It does not appear in lists of common date
formats in Wikipedia[1,2].
3. Even if (2) is wrong, it is better to prefer ISO-like
dates, as that is consistent with what we use elsewhere
in git.
[1] http://en.wikipedia.org/wiki/Date_and_time_representation_by_country
[2] http://en.wikipedia.org/wiki/Calendar_date
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we "git checkout $tree", we pull paths from $tree into
the index, and then check the resulting entries out to the
worktree. Our method for the first step is rather
heavy-handed, though; it clobbers the entire existing index
entry, even if the content is the same. This means we lose
our stat information, leading checkout_entry to later
rewrite the entire file with identical content.
Instead, let's see if we have the identical entry already in
the index, in which case we leave it in place. That lets
checkout_entry do the right thing. Our tests cover two
interesting cases:
1. We make sure that a file which has no changes is not
rewritten.
2. We make sure that we do update a file that is unchanged
in the index (versus $tree), but has working tree
changes. We keep the old index entry, and
checkout_entry is able to realize that our stat
information is out of date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test misused a URL "file://." to mean "relative to here",
which we no longer accept.
In a file:// URL, typically there is no host, and RFC1738 says that
file:///<path> should be used.
Update t5705 to use a working URL.
Reported-by: Michael Blume <blume.mike@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has gone through the trouble of explicitly adding an empty
note, then "git log" should not silently skip it (as if it didn't exist).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the "git notes" man page advertises that we support binary-safe
notes addition (using the -C option), we currently do not support adding
the empty note (i.e. using the empty blob to annotate an object). Instead,
an empty note is always treated as an intent to remove the note
altogether.
Introduce the --allow-empty option to the add/append/edit subcommands,
to explicitly allow an empty note to be stored into the notes tree.
Also update the documentation, and add test cases for the new option.
Reported-by: James H. Fisher <jhf@trifork.com>
Improved-by: Kyle J. McKay <mackyle@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases documenting the current behavior when trying to
add/append/edit empty notes. This is in preparation for adding
--allow-empty; to allow empty notes to be stored.
Improved-by: Eric Sunshine <sunshine@sunshineco.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure we look for trailers before any conflict line
by reusing the ignore_non_trailer() function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/conflict-hint:
merge & sequencer: turn "Conflicts:" hint into a comment
builtin/commit.c: extract ignore_non_trailer() helper function
merge & sequencer: unify codepaths that write "Conflicts:" hint
builtin/merge.c: drop a parameter that is never used
git-tag.txt: Add a missing hyphen to `-s`
Two tests recently added to t1410 create branches "a" and
"a/b" to test d/f conflicts on reflogs. Earlier, unrelated
tests in that script create the path "A/B" in the working
tree. There's no conflict on a case-sensitive filesystem,
but on a case-insensitive one, "git log" will complain that
"a/b" is both a revision and a working tree path.
We could fix this by using a "--" to disambiguate, but we
are probably better off using names that are less confusing
to make it more clear that they are unrelated to the working
tree files. This patch turns "a/b" into "one/two".
Reported-by: Michael Blume <blume.mike@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Corner-case bugfixes for "git fetch" around reflog handling.
* jk/fetch-reflog-df-conflict:
ignore stale directories when checking reflog existence
fetch: load all default config at startup
line-log tries to access all parents of a commit, but only the first
parent has been loaded if "--first-parent" is specified, resulting
in a crash.
Limit the number of parents to one if "--first-parent" is specified.
Reported-by: Eric N. Vander Weele <ericvw@gmail.com>
Signed-off-by: Tzvetan Mikov <tmikov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we update a ref, we have two rules for whether or not
we actually update the reflog:
1. If the reflog already exists, we will always append to
it.
2. If log_all_ref_updates is set, we will create a new
reflog file if necessary.
We do the existence check by trying to open the reflog file,
either with or without O_CREAT (depending on log_all_ref_updates).
If it fails, then we check errno to see what happened.
If we were not using O_CREAT and we got ENOENT, the file
doesn't exist, and we return success (there isn't a reflog
already, and we were not told to make a new one).
If we get EISDIR, then there is likely a stale directory
that needs to be removed (e.g., there used to be "foo/bar",
it was deleted, and the directory "foo" was left. Now we
want to create the ref "foo"). If O_CREAT is set, then we
catch this case, try to remove the directory, and retry our
open. So far so good.
But if we get EISDIR and O_CREAT is not set, then we treat
this as any other error, which is not right. Like ENOENT,
EISDIR is an indication that we do not have a reflog, and we
should silently return success (we were not told to create
it). Instead, the current code reports this as an error, and
we fail to update the ref at all.
Note that this is relatively unlikely to happen, as you
would have to have had reflogs turned on, and then later
turned them off (it could also happen due to a bug in fetch,
but that was fixed in the previous commit). However, it's
quite easy to fix: we just need to treat EISDIR like ENOENT
for the non-O_CREAT case, and silently return (note that
this early return means we can also simplify the O_CREAT
case).
Our new tests cover both cases (O_CREAT and non-O_CREAT).
The first one already worked, of course.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we start the git-fetch program, we call git_config to
load all config, but our callback only processes the
fetch.prune option; we do not chain to git_default_config at
all.
This means that we may not load some core configuration
which will have an effect. For instance, we do not load
core.logAllRefUpdates, which impacts whether or not we
create reflogs in a bare repository.
Note that I said "may" above. It gets even more exciting. If
we have to transfer actual objects as part of the fetch,
then we call fetch_pack as part of the same process. That
function loads its own config, which does chain to
git_default_config, impacting global variables which are
used by the rest of fetch. But if the fetch is a pure ref
update (e.g., a new ref which is a copy of an old one), we
skip fetch_pack entirely. So we get inconsistent results
depending on whether or not we have actual objects to
transfer or not!
Let's just load the core config at the start of fetch, so we
know we have it (we may also load it again as part of
fetch_pack, but that's OK; it's designed to be idempotent).
Our tests check both cases (with and without a pack). We
also check similar behavior for push for good measure, but
it already works as expected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Locked paths can be saved in a linked list so that if something wrong
happens, *.lock are removed. For relative paths, this works fine if we
keep cwd the same, which is true 99% of time except:
- update-index and read-tree hold the lock on $GIT_DIR/index really
early, then later on may call setup_work_tree() to move cwd.
- Suppose a lock is being held (e.g. by "git add") then somewhere
down the line, somebody calls real_path (e.g. "link_alt_odb_entry"),
which temporarily moves cwd away and back.
During that time when cwd is moved (either permanently or temporarily)
and we decide to die(), attempts to remove relative *.lock will fail,
and the next operation will complain that some files are still locked.
Avoid this case by turning relative paths to absolute before storing
the path in "filename" field.
Reported-by: Yue Lin Ho <yuelinho777@gmail.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Adapted-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow painting or not painting (partial) matches in context lines
when showing "grep -C<num>" output in color.
* rs/grep-color-words:
grep: add color.grep.matchcontext and color.grep.matchselected
Allow diff tool backend to stop early by exiting with a non-zero
status.
* da/difftool:
difftool: add support for --trust-exit-code
difftool--helper: exit when reading a prompt answer fails
In a tarball extract whose files are all read-only, running GPG
tests would have failed due to unwritable files.
* mg/lib-gpg-ro-safety:
t/lib-gpg: make gpghome files writable
Tighten the logic to decide that an unreachable cruft is
sufficiently old by covering corner cases such as an ancient object
becoming reachable and then going unreachable again, in which case
its retention period should be prolonged.
* jk/prune-mtime: (28 commits)
drop add_object_array_with_mode
revision: remove definition of unused 'add_object' function
pack-objects: double-check options before discarding objects
repack: pack objects mentioned by the index
pack-objects: use argv_array
reachable: use revision machinery's --indexed-objects code
rev-list: add --indexed-objects option
rev-list: document --reflog option
t5516: test pushing a tag of an otherwise unreferenced blob
traverse_commit_list: support pending blobs/trees with paths
make add_object_array_with_context interface more sane
write_sha1_file: freshen existing objects
pack-objects: match prune logic for discarding objects
pack-objects: refactor unpack-unreachable expiration check
prune: keep objects reachable from recent objects
sha1_file: add for_each iterators for loose and packed objects
count-objects: use for_each_loose_file_in_objdir
count-objects: do not use xsize_t when counting object size
prune-packed: use for_each_loose_file_in_objdir
reachable: mark index blobs as SEEN
...
Just like other hints such as "Changes to be committed" we show in
the editor to remind the committer what paths were involved in the
resulting commit to help improving their log message, this section
is merely a reminder.
Traditionally, it was not made into comments primarily because it
has to be generated outside the wt-status infrastructure, and also
because it was meant as a bit stronger reminder than the others
(i.e. explaining how you resolved conflicts is much more important
than mentioning what you did to every paths involved in the commit).
But that still does not make this hint a part of the log message
proper, and not showing it as a comment is inviting mistakes.
Note that we still notice "Conflicts:" followed by list of indented
pathnames as an old-style cruft and insert a new Signed-off-by:
before it. This is so that "commit --amend -s" adds the new S-o-b
at the right place when used on an older commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach difftool to exit when a diff tool returns a non-zero exit
code when either --trust-exit-code is specified or
difftool.trustExitCode is true.
Forward exit codes from invoked diff tools to the caller when
--trust-exit-code is used.
Suggested-by: Adri Farr <14farresa@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config option color.grep.match can be used to specify the highlighting
color for matching strings. Add the options matchContext and matchSelected
to allow different colors to be specified for matching strings in the
context vs. in selected lines. This is similar to the ms and mc specifiers
in GNU grep's environment variable GREP_COLORS.
Tests are from Zoltan Klinger's earlier attempt to solve the same
issue in a different way.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_add_commented_lines() function passes a pair of prefixes,
one to be used for a non-empty line, and the other for an empty
line, to underlying add_lines(). The former is set to a comment
char followed by a SP, while the latter is set to just the comment
char. This is designed to give a SP after the comment character,
e.g. "# <user text>\n", on a line with some text, and to avoid
emitting an unsightly "# \n" for an empty line.
Teach this machinery to also use the latter space-less prefix when
the payload line begins with a tab, to show e.g. "#\t<user text>\n";
otherwise we will end up showing "# \t<user text>\n" which is
similarly unsightly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-gpg.sh copies the test environment's gpg home to the trash
directory and makes sure the directoty is writable.
Make sure the copied files are writable, too.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An attempt to quit difftool by hitting Ctrl-D (EOF) at its prompt does
not quit it, but is treated as if 'yes' was answered to the prompt and
all following prompts, which is contrary to the user's intent. Fix the
error check.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Splitting pack-objects output into multiple packs is incompatible
with the use of reachability bitmap.
* jk/pack-objects-no-bitmap-when-splitting:
pack-objects: turn off bitmaps when we split packs
push --signed promises to take user.signingkey as the signing key but
fails to read the config.
Make it do so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting from a single file, A, if you create B as a copy of A (and
possibly make some edit) and then make extensive change to A, you
will see:
$ git diff -C --name-status
C89 A B
M A
which is expected. However, if you ask the same question in a
different way, you see this:
$ git diff -B -M --name-status
R89 A B
M100 A
telling us that A was rename-edited into B (as if "A will no longer
exist as the result") and at the same time A itself was extensively
edited.
In this case, because the resulting tree still does have file A
(even if it has contents vastly different from the original), we
should use "C"opy, not "R"ename, to avoid hinting that A somehow
goes away.
Two existing tests were depending on the wrong behaviour, and fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow a temporary directory specified to be used while running "git
mergetool" backend.
* da/mergetool-temporary-directory:
t7610-mergetool: add test cases for mergetool.writeToTemp
mergetool: add an option for writing to a temporary directory
