Over HTTP, NTLM and Kerberos require two rounds of authentication on the
client side. It's possible that there are custom authentication schemes
that also implement this same approach. Since these are tricky schemes
to implement and the HTTP library in use may not always handle them
gracefully on all systems, it would be helpful to allow the credential
helper to implement them instead for increased portability and
robustness.
To allow this to happen, add a boolean flag, continue, that indicates
that instead of failing when we get a 401, we should retry another round
of authentication. However, this necessitates some changes in our
current credential code so that we can make this work.
Keep the state[] headers between iterations, but only use them to send
to the helper and only consider the new ones we read from the credential
helper to be valid on subsequent iterations. That avoids us passing
stale data when we finally approve or reject the credential. Similarly,
clear the multistage and wwwauth[] values appropriately so that we
don't pass stale data or think we're trying a multiround response when
we're not. Remove the credential values so that we can actually fill a
second time with new responses.
Limit the number of iterations of reauthentication we do to 3. This
means that if there's a problem, we'll terminate with an error message
instead of retrying indefinitely and not informing the user (and
possibly conducting a DoS on the server).
In our tests, handle creating multiple response output files from our
helper so we can verify that each of the messages sent is correct.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some HTTP authentication schemes, such as NTLM- and Kerberos-based
options, require more than one round trip to authenticate. Currently,
these can only be supported in libcurl, since Git does not have support
for this in the credential helper protocol.
However, in a future commit, we'll add support for this functionality
into the credential helper protocol and Git itself. Because we don't
really want to implement either NTLM or Kerberos, both of which are
complex protocols, we'll want to test this using a fake credential
authentication scheme. In order to do so, update t5563 and its backend
to allow us to accept multiple sets of credentials and respond with
different behavior in each case.
Since we can now provide any number of possible status codes, provide a
non-specific reason phrase so we don't have to generate a more specific
one based on the response. The reason phrase is mandatory according to
the status-line production in RFC 7230, but clients SHOULD ignore it,
and curl does (except to print it).
Each entry in the authorization and challenge fields contains an ID,
which indicates a corresponding credential and response. If the
response is a 200 status, then we continue to execute git-http-backend.
Otherwise, we print the corresponding status and response. If no ID is
matched, we use the default response with a status of 401.
Note that there is an implicit order to the parameters. The ID is
always first and the creds or response value is always last, and
therefore may contain spaces, equals signs, or other arbitrary data.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we've implemented the state capability, let's send it along by
default when filling credentials so we can make use of it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have the credential helper code set up to handle arbitrary
authentications schemes, let's add support for this in the HTTP code,
where we really want to use it. If we're using this new functionality,
don't set a username and password, and instead set a header wherever
we'd normally do so, including for proxy authentication.
Since we can now handle this case, ask the credential helper to enable
the appropriate capabilities.
Finally, if we're using the authtype value, set "Expect: 100-continue".
Any type of authentication that requires multiple rounds (such as NTLM
or Kerberos) requires a 100 Continue (if we're larger than
http.postBuffer) because otherwise we send the pack data before we're
authenticated, the push gets a 401 response, and we can't rewind the
stream. We don't know for certain what other custom schemes might
require this, the HTTP/1.1 standard has required handling this since
1999, the broken HTTP server for which we disabled this (Google's) is
now fixed and has been for some time, and libcurl has a 1-second
fallback in case the HTTP server is still broken. In addition, it is
not unreasonable to require compliance with a 25-year old standard to
use new Git features. For all of these reasons, do so here.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We started unconditionally testing with CGIPassAuth directive but
it is unavailable in older Apache that ships with CentOS 7 that has
about a year of shelf-life still left. The test has conditionally
been disabled when running with an ancient Apache. This was a fix
for a recent regression caught before the release, so no need to
mention it in the release notes.
* jk/http-test-cgipassauth-unavailable-in-older-apache:
t/lib-httpd: make CGIPassAuth support conditional
Commit 988aad99b4 (t5563: add tests for basic and anoymous HTTP access,
2023-02-27) added tests that require Apache to support the CGIPassAuth
directive, which was added in Apache 2.4.13. This is fairly old (~8
years), but recent enough that we still encounter it in the wild (e.g.,
RHEL/CentOS 7, which is not EOL until June 2024).
We can live with skipping the new tests on such a platform. But
unfortunately, since the directive is used unconditionally in our
apache.conf, it means the web server fails to start entirely, and we
cannot run other HTTP tests at all (e.g., the basic ones in t5551).
We can fix that by making the config conditional, and only triggering it
for t5563. That solves the problem for t5551 (which then ignores the
directive entirely). For t5563, we'd see apache complain in start_httpd;
with the default setting of GIT_TEST_HTTPD, we'd then skip the whole
script.
But that leaves one small problem: people may set GIT_TEST_HTTPD=1
explicitly, which instructs the tests to fail (rather than skip) when we
can't start the webserver (to avoid accidentally missing some tests).
This could be worked around by having the user manually set
GIT_SKIP_TESTS on a platform with an older Apache. But we can be a bit
friendlier by doing the version check ourselves and setting an
appropriate prereq. We'll use the (lack of) prereq to then skip the rest
of t5563. In theory we could use the prereq to skip individual tests, but
in practice this whole script depends on it.
Reported-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When I ran this test using `TEST_SHELL_PATH=/bin/bash` in my Ubuntu
setup (where Bash is at version 5.0.17(1)-release), I was greeted with
this error message:
./test-lib.sh: line 1072: $CHALLENGE: ambiguous redirect
This commit fixes that error by quoting the `CHALLENGE` variable (which
has as value a path containing spaces), and by avoiding to cuddle the
empty string parameter in the `printf` call with the redirect character
(in fact, the `printf ''>$CHALLENGE` is removed because the next line
overwrites the file anyway because it _also_ uses a single `>` to
redirect the output).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the value of the WWW-Authenticate response header to credential
requests. Credential helpers that understand and support HTTP
authentication and authorization can use this standard header (RFC 2616
Section 14.47 [1]) to generate valid credentials.
WWW-Authenticate headers can contain information pertaining to the
authority, authentication mechanism, or extra parameters/scopes that are
required.
The current I/O format for credential helpers only allows for unique
names for properties/attributes, so in order to transmit multiple header
values (with a specific order) we introduce a new convention whereby a
C-style array syntax is used in the property name to denote multiple
ordered values for the same property.
In this case we send multiple `wwwauth[]` properties where the order
that the repeated attributes appear in the conversation reflects the
order that the WWW-Authenticate headers appeared in the HTTP response.
Add a set of tests to exercise the HTTP authentication header parsing
and the interop with credential helpers. Credential helpers will receive
WWW-Authenticate information in credential requests.
[1] https://datatracker.ietf.org/doc/html/rfc2616#section-14.47
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test showing simple anoymous HTTP access to an unprotected
repository, that results in no credential helper invocations.
Also add a test demonstrating simple basic authentication with
simple credential helper support.
Leverage a no-parsed headers (NPH) CGI script so that we can directly
control the HTTP responses to simulate a multitude of good, bad and ugly
remote server implementations around auth.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
