"git stash --staged" errors out when given binary files, after saving the
stash.
This behaviour dates back to the addition of the feature in 41a28eb6c1
(stash: implement '--staged' option for 'push' and 'save', 2021-10-18).
Adding the "--binary" option of "diff-tree" fixes this. The "diff-tree" call
in stash_patch() also omits "--binary", but that is fine since binary files
cannot be selected interactively.
Helped-By: Jeff King <peff@peff.net>
Helped-By: Randall S. Becker <randall.becker@nexbridge.ca>
Signed-off-by: Adam Johnson <me@adamj.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" sometimes was silent even when it failed due to
unwritable index file, which has been corrected.
* ps/report-failure-from-git-stash:
builtin/stash: report failure to write to index
The git-stash(1) command needs to write to the index for many of its
operations. When the index is locked by a concurrent writer it will thus
fail to operate, which is expected. What is not expected though is that
we do not print any error message at all in this case. The user can thus
easily miss the fact that the command didn't do what they expected it to
do and would be left wondering why that is.
Fix this bug and report failures to write to the index. Add tests for
the subcommands which hit the respective code paths.
While at it, unify error messages when writing to the index fails. The
chosen error message is already used in "builtin/stash.c".
Reported-by: moti sd <motisd8@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this test, the calls to cut(1) are only used to verify that the
contents of the reflog entry look as expected. By replacing these with
git-reflog(1) calls, we can make this test ref-backend agnostic.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another step to deprecate test_i18ngrep.
* jc/test-i18ngrep:
tests: teach callers of test_i18ngrep to use test_grep
test framework: further deprecate test_i18ngrep
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Feeding "git stash store" with a random commit that was not created
by "git stash create" now errors out.
* jc/fail-stash-to-store-non-stash:
stash: be careful what we store
"git stash store" is meant to store what "git stash create"
produces, as these two are implementation details of the end-user
facing "git stash save" command. Even though it is clearly
documented as such, users would try silly things like "git stash
store HEAD" to render their stash unusable.
Worse yet, because "git stash drop" does not allow such a stash
entry to be removed, "git stash clear" would be the only way to
recover from such a mishap. Reuse the logic that allows "drop" to
refrain from working on such a stash entry to teach "store" to avoid
storing an object that is not a stash entry in the first place.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests still use the old format with four spaces indentation.
Standardize the tests to the new format with tab indentation.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash' parses its subcommands with a long list of if-else if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
and listing subcommands for Bash completion.
Note that the push_stash() function implementing the 'push' subcommand
accepts an extra flag parameter to indicate whether push was assumed,
so add a wrapper function with the standard subcommand function
signature.
Note also that this change "hides" the '-h' option in 'git stash push
-h' from the parse_option() call in cmd_stash(), as it comes after the
subcommand. Consequently, from now on it will emit the usage of the
'push' subcommand instead of the usage of 'git stash'. We had a
failing test for this case, which can now be flipped to expect
success.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix inclusion errors which would occur if the $TEST_DIRECTORY had $IFS
whitespace in it.
See d42bab442d (core.fsyncmethod: tests for batch mode, 2022-04-04)
and a242c150eb (vimdiff: integrate layout tests in the unit tests
framework ('t' folder), 2022-03-30) for the two relevant commits. Both
were first released with v2.37.0-rc0 (and were also part of v2.37.0).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a filesystem-dependent mechanism to optimize the way the
bits for many loose object files are ensured to hit the disk
platter.
* ns/batch-fsync:
core.fsyncmethod: performance tests for batch mode
t/perf: add iteration setup mechanism to perf-lib
core.fsyncmethod: tests for batch mode
test-lib-functions: add parsing helpers for ls-files and ls-tree
core.fsync: use batch mode and sync loose objects by default on Windows
unpack-objects: use the bulk-checkin infrastructure
update-index: use the bulk-checkin infrastructure
builtin/add: add ODB transaction around add_files_to_cache
cache-tree: use ODB transaction around writing a tree
core.fsyncmethod: batched disk flushes for loose-objects
bulk-checkin: rebrand plug/unplug APIs as 'odb transactions'
bulk-checkin: rename 'state' variable and separate 'plugged' boolean
Add test cases to exercise batch mode for:
* 'git add'
* 'git stash'
* 'git update-index'
* 'git unpack-objects'
These tests ensure that the added data winds up in the object database.
In this change we introduce a new test helper lib-unique-files.sh. The
goal of this library is to create a tree of files that have different
oids from any other files that may have been created in the current test
repo. This helps us avoid missing validation of an object being added
due to it already being in the repo.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" does not allow subcommands it internally runs as its
implementation detail, except for "git reset", to emit messages;
now "git reset" part has also been squelched.
* vd/stash-silence-reset:
reset: show --no-refresh in the short-help
reset: remove 'reset.refresh' config option
reset: remove 'reset.quiet' config option
reset: do not make '--quiet' disable index refresh
stash: make internal resets quiet and refresh index
reset: suppress '--no-refresh' advice if logging is silenced
reset: replace '--quiet' with '--no-refresh' in performance advice
reset: introduce --[no-]refresh option to --mixed
reset: revise index refresh advice
"git stash drop" is reimplemented as an internal call to
reflog_delete() function, instead of invoking "git reflog delete"
via run_command() API.
* jc/stash-drop:
stash: call reflog_delete() in reflog.c
reflog: libify delete reflog function and helpers
stash: add tests to ensure reflog --rewrite --updatref behavior
Add the options '-q' and '--refresh' to the 'git reset' executed in
'reset_head()', and '--refresh' to the 'git reset -q' executed in
'do_push_stash(...)'.
'stash' is implemented such that git commands invoked as part of it (e.g.,
'clean', 'read-tree', 'reset', etc.) have their informational output
silenced. However, the 'reset' in 'reset_head()' is *not* called with '-q',
leading to the potential for a misleading printout from 'git stash apply
--index' if the stash included a removed file:
Unstaged changes after reset: D <deleted file>
Not only is this confusing in its own right (since, after the reset, 'git
stash' execution would stage the deletion in the index), it would be printed
even when the stash was applied with the '-q' option. As a result, the
messaging is removed entirely by calling 'git status' with '-q'.
Additionally, because the default behavior of 'git reset -q' is to skip
refreshing the index, but later operations in 'git stash' subcommands expect
a non-stale index, enable '--refresh' as well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -b branch/with/multi/level/name && git stash" only
recorded the last level component of the branch name, which has
been corrected.
* gc/stash-on-branch-with-multi-level-name:
stash: strip "refs/heads/" with skip_prefix
Test modernization.
* cg/t3903-modernize:
tests: make the code more readable
tests: allow testing if a path is truly a file or a directory
t/t3903-stash.sh: replace test [-d|-f] with test_path_is_*
There is missing test coverage to ensure that the resulting reflogs
after a git stash drop has had its old oid rewritten if applicable, and
if the refs/stash has been updated if applicable.
Add two tests that verify both of these happen.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating a message for a stash, "git stash" only records the
part of the branch name to the right of the last "/". e.g. if HEAD is at
"foo/bar/baz", "git stash" generates a message prefixed with "WIP on
baz:" instead of "WIP on foo/bar/baz:".
Fix this by using skip_prefix() to skip "refs/heads/" instead of looking
for the last instance of "/".
Reported-by: Kraymer <kraymer@gmail.com>
Reported-by: Daniel Hahler <git@thequod.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the parsing of the output of "ls -l" by test_path_is_symlink() and
test_readlink().
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test_path_is_file_not_symlink(), test_path_is_dir_not_symlink()
and test_path_is_symlink(). Case of use for the first one
in test t/t3903-stash.sh to replace "test -f" because that function
explicitly want the file not to be a symlink.
Give more friendly error message.
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_path_is_* to replace test [-d|-f] because that give more
explicit debugging information. And it doesn't change the semantics.
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8a2cd3f512 (stash: remove the stash.useBuiltin setting, 2020-03-03),
we removed support for `stash.useBuiltin`, but left a warning in its
place.
After almost two years, and several major versions, it is time to remove
even that warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash apply" forgot to attempt restoring untracked files when
it failed to restore changes to tracked ones.
* en/stash-df-fix:
stash: do not return before restoring untracked files
"git stash" by default triggers its "push" action, but its
implementation also made "git stash -h" to show short help only for
"git stash push", which has been corrected.
* ab/do-not-limit-stash-help-to-push:
stash: don't show "git stash push" usage on bad "git stash" usage
In commit bee8691f19 ("stash: restore untracked files AFTER restoring
tracked files", 2021-09-10), we correctly identified that we should
restore changes to tracked files before attempting to restore untracked
files, and accordingly moved the code for restoring untracked files a
few lines down in do_apply_stash(). Unfortunately, the intervening
lines had some early return statements meaning that we suddenly stopped
restoring untracked files in some cases.
Even before the previous commit, there was another possible issue with
the current code -- a post-stash-apply 'git status' that was intended
to be run after restoring the stash was skipped when we hit a conflict
(or other error condition), which seems slightly inconsistent.
Fix both issues by saving the return status, and letting other
functionality run before returning.
Reported-by: AJ Henderson
Test-case-by: Randall S. Becker <randall.becker@nexbridge.ca>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the usage message emitted by "git stash --invalid-option" to
emit usage information for "git stash" in general, and not just for
the "push" command. I.e. before:
$ git stash --invalid-option
error: unknown option `invalid-option'
usage: git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[--] [<pathspec>...]]
[...]
After:
$ git stash --invalid-option
error: unknown option `invalid-option'
usage: git stash list [<options>]
or: git stash show [<options>] [<stash>]
or: git stash drop [-q|--quiet] [<stash>]
or: git stash ( pop | apply ) [--index] [-q|--quiet] [<stash>]
or: git stash branch <branchname> [<stash>]
or: git stash clear
or: git stash [push [-p|--patch] [-S|--staged] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[--pathspec-from-file=<file> [--pathspec-file-nul]]
[--] [<pathspec>...]]
or: git stash save [-p|--patch] [-S|--staged] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [<message>]
[...]
That we emitted the usage for just "push" in the case of the
subcommand not being explicitly specified was an unintentional
side-effect of how it was implemented. When it was converted to C in
d553f538b8 (stash: convert push to builtin, 2019-02-25) the pattern
of having per-subcommand usage information was rightly continued. The
"git-stash.sh" shellscript did not have that, and always printed the
equivalent of "git_stash_usage".
But in doing so the case of push being implicit and explicit was
conflated. A variable was added to track this in 8c3713cede (stash:
eliminate crude option parsing, 2020-02-17), but it did not update the
usage output accordingly.
This still leaves e.g. "git stash push -h" emitting the
"git_stash_usage" output, instead of "git_stash_push_usage". That
should be fixed, but is a much deeper misbehavior in parse_options()
not being aware of subcommands at all. I.e. in how
PARSE_OPT_KEEP_UNKNOWN and PARSE_OPT_NO_INTERNAL_HELP combine in
commands such as "git stash".
Perhaps PARSE_OPT_KEEP_UNKNOWN should imply
PARSE_OPT_NO_INTERNAL_HELP, or better yet parse_options() should be
extended to fully handle these subcommand cases that we handle
manually in "git stash", "git commit-graph", "git multi-pack-index"
etc. All of those musings would be a much bigger change than this
isolated fix though, so let's leave that for some other time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stash only the changes that are staged.
This mode allows to easily stash-out for later reuse some changes
unrelated to the current work in progress.
Unlike 'stash push --patch', --staged supports use of any tool to
select the changes to stash-out, including, but not limited to 'git
add --interactive'.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user deletes a file and places a directory of untracked files
there, then stashes all these changes, the untracked directory of files
cannot be restored until after the corresponding file in the way is
removed. So, restore changes to tracked files before restoring
untracked files.
There is no counterpart problem to worry about with the user deleting an
untracked file and then add a tracked one in its place. Git does not
track untracked files, and so will not know the untracked file was
deleted, and thus won't be able to stash the removal of that file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file is removed from the cache, but there is a file of the same
name present in the working directory, we would normally treat that file
in the working directory as untracked. However, in the case of stash,
doing that would prevent a simple 'git stash push', because the untracked
file would be in the way of restoring the deleted file.
git stash, however, blindly assumes that whatever is in the working
directory for a deleted file is wanted and passes that path along to
update-index. That causes problems when the working directory contains
a directory with the same name as the deleted file. Add some code for
this special case that will avoid passing directory names to
update-index.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three tests here, because the second bug is documented with
two tests: a file -> directory change and a directory -> file change.
The reason for the two tests is just to verify that both are indeed
broken but that both will be fixed by the same simple change (which will
be provided in a subsequent patch).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Passing "-m" in "git log --first-parent -m" is not needed as
--first-parent implies --diff-merges=first-parent anyway. OTOH, it
will stop being harmless once we let "-m" imply "-p".
While we are at it, fix corresponding test description in t3903-stash
to match what it actually tests.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t3[5-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" has kept an escape hatch to use the scripted version
for a few releases, which got stale. It has been removed.
* tg/retire-scripted-stash:
stash: remove the stash.useBuiltin setting
stash: get git_stash_config at the top level
Remove the stash.useBuiltin setting which was added as an escape hatch
to disable the builtin version of stash first released with Git 2.22.
Carrying the legacy version is a maintenance burden, and has in fact
become out of date failing a test since the 2.23 release, without
anyone noticing until now. So users would be getting a hint to fall
back to a potentially buggy version of the tool.
We used to shell out to git config to get the useBuiltin configuration
to avoid changing any global state before spawning legacy-stash.
However that is no longer necessary, so just use the 'git_config'
function to get the setting instead.
Similar to what we've done in d03ebd411c ("rebase: remove the
rebase.useBuiltin setting", 2019-03-18), where we remove the
corresponding setting for rebase, we leave the documentation in place,
so people can refer back to it when searching for it online, and so we
can refer to it in the commit message.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eliminate crude option parsing and rely on real parsing instead, because
1) Crude parsing is crude, for example it's not capable of
handling things like `git stash -m Message`
2) Adding options in two places is inconvenient and prone to bugs
As a side result, the case of `git stash -m Message` gets fixed.
Also give a good error message instead of just throwing usage at user.
----
Some review of what's been happening to this code:
Before [1], `git-stash.sh` only verified that all args begin with `-` :
# The default command is "push" if nothing but options are given
seen_non_option=
for opt
do
case "$opt" in
--) break ;;
-*) ;;
*) seen_non_option=t; break ;;
esac
done
Later, [1] introduced the duplicate code I'm now removing, also making
the previous test more strict by white-listing options.
----
[1] Commit 40af1468 ("stash: convert `stash--helper.c` into `stash.c`" 2019-02-26)
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to "git stash pop" made the command empty the index
when run with the "--quiet" option, which has been corrected.
* tg/stash-refresh-index:
stash: make sure we have a valid index before writing it
In 'do_apply_stash()' we refresh the index in the end. Since
34933d0eff ("stash: make sure to write refreshed cache", 2019-09-11),
we also write that refreshed index when --quiet is given to 'git stash
apply'.
However if '--index' is not given to 'git stash apply', we also
discard the index in the else clause just before. We need to do so
because we use an external 'git update-index --add --stdin', which
leads to an out of date in-core index.
Later we call 'refresh_and_write_cache', which now leads to writing
the discarded index, which means we essentially write an empty index
file. This is obviously not correct, or the behaviour the user
wanted. We should not modify the users index without being asked to
do so.
Make sure to re-read the index after discarding the current in-core
index, to avoid dealing with outdated information. Instead we could
also drop the 'discard_cache()' + 'read_cache()', however that would
make it easy to fall into the same trap as 34933d0eff did, so it's
better to avoid that.
We can also drop the 'refresh_and_write_cache' completely in the quiet
case. Previously in legacy stash we relied on 'git status' to refresh
the index after calling 'git read-tree' when '--index' was passed to
'git apply'. However the 'reset_tree()' call that replaced 'git
read-tree' always passes options that are equivalent to '-m', making
the refresh of the index unnecessary.
Reported-by: Grzegorz Rajchman <rayman17@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" in a working tree that is sparsely checked out
mistakenly removed paths that are outside the area of interest.
* js/update-index-ignore-removal-for-skip-worktree:
stash: handle staged changes in skip-worktree files correctly
update-index: optionally leave skip-worktree entries alone
When calling `git stash` while changes were staged for files that are
marked with the `skip-worktree` bit (e.g. files that are excluded in a
sparse checkout), the files are recorded as _deleted_ instead.
The reason is that `git stash` tries to construct the tree reflecting
the worktree essentially by copying the index to a temporary one and
then updating the files from the worktree. Crucially, it calls `git
diff-index` to update also those files that are in the HEAD but have
been unstaged in the index.
However, when the temporary index is updated via `git update-index --add
--remove`, skip-worktree entries mark the files as deleted by mistake.
Let's use the newly-introduced `--ignore-skip-worktree-entries` option
of `git update-index` to prevent exactly this from happening.
Note that the regression test case deliberately avoids replicating the
scenario described above and instead tries to recreate just the symptom.
Reported by Dan Thompson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" learned to write refreshed index back to disk.
* tg/stash-refresh-index:
stash: make sure to write refreshed cache
merge: use refresh_and_write_cache
factor out refresh_and_write_cache function
When converting stash into C, calls to 'git update-index --refresh'
were replaced with the 'refresh_cache()' function. That is fine as
long as the index is only needed in-core, and not re-read from disk.
However in many cases we do actually need the refreshed index to be
written to disk, for example 'merge_recursive_generic()' discards the
in-core index before re-reading it from disk, and in the case of 'apply
--quiet', the 'refresh_cache()' we currently have is pointless without
writing the index to disk.
Always write the index after refreshing it to ensure there are no
regressions in this compared to the scripted stash. In the future we
can consider avoiding the write where possible after making sure none
of the subsequent calls actually need the refreshed cache, and it is
not expected to be refreshed after stash exits or it is written
somewhere else already.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abstract away the SHA-1-specific constants by sanitizing diff output to
remove the index lines, since it's clear from the assertions in question
that we are not interested in the specific object IDs.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash --keep-index" did not work correctly on paths that have
been removed, which has been fixed.
* tg/stash-keep-index-with-removed-paths:
stash: fix handling removed files with --keep-index
git stash push --keep-index is supposed to keep all changes that have
been added to the index, both in the index and on disk.
Currently this doesn't behave correctly when a file is removed from
the index. Instead of keeping it deleted on disk, --keep-index
currently restores the file.
Fix that behaviour by using 'git checkout' in no-overlay mode which
can faithfully restore the index and working tree. This also
simplifies the code.
Note that this will overwrite untracked files if the untracked file
has the same name as a file that has been deleted in the index.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the conversion of 'stash show' to C in dc7bd382b1 ("stash: convert
show to builtin", 2019-02-25), 'git stash show <n>', where n is the
index of a stash got broken, if n is not a file or a valid revision by
itself.
'stash show' accepts any flag 'git diff' accepts for changing the
output format. Internally we use 'setup_revisions()' to parse these
command line flags. Currently we pass the whole argv through to
'setup_revisions()', which includes the stash index.
As the stash index is not a valid revision or a file in the working
tree in most cases however, this 'setup_revisions()' call (and thus
the whole command) ends up failing if we use this form of 'git stash
show'.
Instead of passing the whole argv to 'setup_revisions()', only pass
the flags (and the command name) through, while excluding the stash
reference. The stash reference is parsed (and validated) in
'get_stash_info()' already.
This separate parsing also means that we currently do produce the
correct output if the command succeeds.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>