* maint-2.33:
Git 2.33.2
Git 2.32.1
Git 2.31.2
GIT-VERSION-GEN: bump to v2.33.1
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.31:
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
When determining the length of the longest ancestor of a given path with
respect to to e.g. `GIT_CEILING_DIRECTORIES`, we special-case the root
directory by returning 0 (i.e. we pretend that the path `/` does not end
in a slash by virtually stripping it).
That is the correct behavior because when normalizing paths, the root
directory is special: all other directory paths have their trailing
slash stripped, but not the root directory's path (because it would
become the empty string, which is not a legal path).
However, this special-casing of the root directory in
`longest_ancestor_length()` completely forgets about Windows-style root
directories, e.g. `C:\`. These _also_ get normalized with a trailing
slash (because `C:` would actually refer to the current directory on
that drive, not necessarily to its root directory).
In fc56c7b34b (mingw: accomodate t0060-path-utils for MSYS2,
2016-01-27), we almost got it right. We noticed that
`longest_ancestor_length()` expects a slash _after_ the matched prefix,
and if the prefix already ends in a slash, the normalized path won't
ever match and -1 is returned.
But then that commit went astray: The correct fix is not to adjust the
_tests_ to expect an incorrect -1 when that function is fed a prefix
that ends in a slash, but instead to treat such a prefix as if the
trailing slash had been removed.
Likewise, that function needs to handle the case where it is fed a path
that ends in a slash (not only a prefix that ends in a slash): if it
matches the prefix (plus trailing slash), we still need to verify that
the path does not end there, otherwise the prefix is not actually an
ancestor of the path but identical to it (and we need to return -1 in
that case).
With these two adjustments, we no longer need to play games in t0060
where we only add `$rootoff` if the passed prefix is different from the
MSYS2 pseudo root, instead we also add it for the MSYS2 pseudo root
itself. We do have to be careful to skip that logic entirely for Windows
paths, though, because they do are not subject to that MSYS2 pseudo root
treatment.
This patch fixes the scenario where a user has set
`GIT_CEILING_DIRECTORIES=C:\`, which would be ignored otherwise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
"git maintenance" scheduler learned to use systemd timers as a
possible backend.
* lh/systemd-timers:
maintenance: add support for systemd timers on Linux
maintenance: `git maintenance run` learned `--scheduler=<scheduler>`
cache.h: Introduce a generic "xdg_config_home_for(…)" function
Current implementation of `xdg_config_home(filename)` returns
`$XDG_CONFIG_HOME/git/$filename`, with the `git` subdirectory inserted
between the `XDG_CONFIG_HOME` environment variable and the parameter.
This patch introduces a `xdg_config_home_for(subdir, filename)` function
which is more generic. It only concatenates "$XDG_CONFIG_HOME", or
"$HOME/.config" if the former isn’t defined, with the parameters,
without adding `git` in between.
`xdg_config_home(filename)` is now implemented by calling
`xdg_config_home_for("git", filename)` but this new generic function can
be used to compute the configuration directory of other programs.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since Git learned to detect its install location at runtime, there
was the slightly awkward problem that it was impossible to specify paths
relative to said location.
For example, if a version of Git was shipped with custom SSL
certificates to use, there was no portable way to specify
`http.sslCAInfo`.
In Git for Windows, the problem was "solved" for years by interpreting
paths starting with a slash as relative to the runtime prefix.
However, this is not correct: such paths _are_ legal on Windows, and
they are interpreted as absolute paths in the same drive as the current
directory.
After a lengthy discussion, and an even lengthier time to mull over the
problem and its best solution, and then more discussions, we eventually
decided to introduce support for the magic sequence `%(prefix)/`. If a
path starts with this, the remainder is interpreted as relative to the
detected (runtime) prefix. If built without runtime prefix support, Git
will simply interpolate the compiled-in prefix.
If a user _wants_ to specify a path starting with the magic sequence,
they can prefix the magic sequence with `./` and voilà, the path won't
be expanded.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not immediately clear what `expand_user_path()` means, so let's
rename it to `interpolate_path()`. This also opens the path for
interpolating more than just a home directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `real_home` parameter only has an effect when expanding paths
starting with `~/`, not when expanding paths starting with `~<user>/`.
Let's make that clear.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 395de250d9 (Expand ~ and ~user in core.excludesfile,
commit.template, 2009-11-17), the `user_path()` function was refactored
into the `expand_user_path()`. During that refactoring, the `buf`
parameter was lost, but the code comment above said function still talks
about it. Let's remove that stale part of the comment.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have tests that cover various filesystem-specific spellings of
".gitmodules", because we need to reliably identify that path for some
security checks. These are from dc2d9ba318 (is_{hfs,ntfs}_dotgitmodules:
add tests, 2018-05-12), with the actual code coming from e7cb0b4455
(is_ntfs_dotgit: match other .git files, 2018-05-11) and 0fc333ba20
(is_hfs_dotgit: match other .git files, 2018-05-02).
Those latter two commits also added similar matching functions for
.gitattributes and .gitignore. These ended up not being used in the
final series, and are currently dead code. But in preparation for them
being used in some fsck checks, let's make sure they actually work by
throwing a few basic tests at them. Likewise, let's cover .mailmap
(which does need matching code added).
I didn't bother with the whole battery of tests that we cover for
.gitmodules. These functions are all based on the same generic matcher,
so it's sufficient to test most of the corner cases just once.
Note that the ntfs magic prefix names in the tests come from the
algorithm described in e7cb0b4455 (and are different for each file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a variety of questions users might ask while resolving
conflicts:
* What changes have been made since the previous (first) parent?
* What changes are staged?
* What is still unstaged? (or what is still conflicted?)
* What changes did I make to resolve conflicts so far?
The first three of these have simple answers:
* git diff HEAD
* git diff --cached
* git diff
There was no way to answer the final question previously. Adding one
is trivial in merge-ort, since it works by creating a tree representing
what should be written to the working copy complete with conflict
markers. Simply write that tree to .git/AUTO_MERGE, allowing users to
answer the fourth question with
* git diff AUTO_MERGE
I avoided using a name like "MERGE_AUTO", because that would be
merge-specific (much like MERGE_HEAD, REBASE_HEAD, REVERT_HEAD,
CHERRY_PICK_HEAD) and I wanted a name that didn't change depending on
which type of operation the merge was part of.
Ensure that paths which clean out other temporary operation-specific
files (e.g. CHERRY_PICK_HEAD, MERGE_MSG, rebase-merge/ state directory)
also clean out this AUTO_MERGE file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check for existence and delete CHERRY_PICK_HEAD through ref functions.
This will help cherry-pick work with alternate ref storage backends.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In rebase, one can pass the `--autostash` option to cause the worktree
to be automatically stashed before continuing with the rebase. This
option is missing in merge, however.
Implement the `--autostash` option and corresponding `merge.autoStash`
option in merge which stashes before merging and then pops after.
This option is useful when a developer has some local changes on a topic
branch but they realize that their work depends on another branch.
Previously, they had to run something like
git fetch ...
git stash push
git merge FETCH_HEAD
git stash pop
but now, that is reduced to
git fetch ...
git merge --autostash FETCH_HEAD
When an autostash is generated, it is automatically reapplied to the
worktree only in three explicit situations:
1. An incomplete merge is commit using `git commit`.
2. A merge completes successfully.
3. A merge is aborted using `git merge --abort`.
In all other situations where the merge state is removed using
remove_merge_branch_state() such as aborting a merge via
`git reset --hard`, the autostash is saved into the stash reflog
instead keeping the worktree clean.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Suggested-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SHA-256 transition continues.
* bc/sha-256-part-1-of-4: (22 commits)
fast-import: add options for rewriting submodules
fast-import: add a generic function to iterate over marks
fast-import: make find_marks work on any mark set
fast-import: add helper function for inserting mark object entries
fast-import: permit reading multiple marks files
commit: use expected signature header for SHA-256
worktree: allow repository version 1
init-db: move writing repo version into a function
builtin/init-db: add environment variable for new repo hash
builtin/init-db: allow specifying hash algorithm on command line
setup: allow check_repository_format to read repository format
t/helper: make repository tests hash independent
t/helper: initialize repository if necessary
t/helper/test-dump-split-index: initialize git repository
t6300: make hash algorithm independent
t6300: abstract away SHA-1-specific constants
t: use hash-specific lookup tables to define test constants
repository: require a build flag to use SHA-256
hex: add functions to parse hex object IDs in any algorithm
hex: introduce parsing variants taking hash algorithms
...
Returning a shared buffer invites very subtle bugs due to reentrancy or
multi-threading, as demonstrated by the previous patch.
There was an unfinished effort to abolish this [1].
Let's finally rid of `real_path()`, using `strbuf_realpath()` instead.
This patch uses a local `strbuf` for most places where `real_path()` was
previously called.
However, two places return the value of `real_path()` to the caller. For
them, a `static` local `strbuf` was added, effectively pushing the
problem one level higher:
read_gitfile_gently()
get_superproject_working_tree()
[1] https://lore.kernel.org/git/1480964316-99305-1-git-send-email-bmwill@google.com/
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`real_path()` returns result from a shared buffer, inviting subtle
reentrance bugs. One of these bugs occur when invoked this way:
set_git_dir(real_path(git_dir))
In this case, `real_path()` has reentrance:
real_path
read_gitfile_gently
repo_set_gitdir
setup_git_env
set_git_dir_1
set_git_dir
Later, `set_git_dir()` uses its now-dead parameter:
!is_absolute_path(path)
Fix this by using a dedicated `strbuf` to hold `strbuf_realpath()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, we will want to not only check the repository format, but
extract the information that we've gained. To do so, allow
check_repository_format to take a pointer to struct repository_format.
Allow passing NULL for this argument if we're not interested in the
information, and pass NULL for all existing callers. A future patch
will make use of this information.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We take a "dst" buffer to write into, but there's no matching "len"
parameter. The hidden assumption is that normalizing always makes things
smaller, so we're OK as long as "dst" is at least as big as "src". Let's
document that explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
Previously, this function was written without focusing on speed,
intending to make reviewing the code as easy as possible, to avoid any
bugs in this critical code.
Turns out: we can do much better on both accounts. With this patch, we
make it as fast as this developer can make it go:
- We avoid the call to `is_dir_sep()` and make all the character
comparisons explicit.
- We avoid the cost of calling `strncasecmp()` and unroll the test for
`.git` and `git~1`, not even using `tolower()` because it is faster to
compare against two constant values.
- We look for `.git` and `.git~1` first thing, and return early if not
found.
- We also avoid calling a separate function for detecting chains of
spaces and periods.
Each of these improvements has a noticeable impact on the speed of
`is_ntfs_dotgit()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We just safe-guarded `.git` against NTFS Alternate Data Stream-related
attack vectors, and now it is time to do the same for `.gitmodules`.
Note: In the added regression test, we refrain from verifying all kinds
of variations between short names and NTFS Alternate Data Streams: as
the new code disallows _all_ Alternate Data Streams of `.gitmodules`, it
is enough to test one in order to know that all of them are guarded
against.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Probably inspired by HFS' resource streams, NTFS supports "Alternate
Data Streams": by appending `:<stream-name>` to the file name,
information in addition to the file contents can be written and read,
information that is copied together with the file (unless copied to a
non-NTFS location).
These Alternate Data Streams are typically used for things like marking
an executable as having just been downloaded from the internet (and
hence not necessarily being trustworthy).
In addition to a stream name, a stream type can be appended, like so:
`:<stream-name>:<stream-type>`. Unless specified, the default stream
type is `$DATA` for files and `$INDEX_ALLOCATION` for directories. In
other words, `.git::$INDEX_ALLOCATION` is a valid way to reference the
`.git` directory!
In our work in Git v2.2.1 to protect Git on NTFS drives under
`core.protectNTFS`, we focused exclusively on NTFS short names, unaware
of the fact that NTFS Alternate Data Streams offer a similar attack
vector.
Let's fix this.
Seeing as it is better to be safe than sorry, we simply disallow paths
referring to *any* NTFS Alternate Data Stream of `.git`, not just
`::$INDEX_ALLOCATION`. This also simplifies the implementation.
This closes CVE-2019-1352.
Further reading about NTFS Alternate Data Streams:
https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-fscc/c54dec26-1551-4d3a-a0ea-4fa40f848eb3
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The config setting `core.protectNTFS` is specifically designed to work
not only on Windows, but anywhere, to allow for repositories hosted on,
say, Linux servers to be protected against NTFS-specific attack vectors.
As a consequence, `is_ntfs_dotgit()` manually splits backslash-separated
paths (but does not do the same for paths separated by forward slashes),
under the assumption that the backslash might not be a valid directory
separator on the _current_ Operating System.
However, the two callers, `verify_path()` and `fsck_tree()`, are
supposed to feed only individual path segments to the `is_ntfs_dotgit()`
function.
This causes a lot of duplicate scanning (and very inefficient scanning,
too, as the inner loop of `is_ntfs_dotgit()` was optimized for
readability rather than for speed.
Let's simplify the design of `is_ntfs_dotgit()` by putting the burden of
splitting the paths by backslashes as directory separators on the
callers of said function.
Consequently, the `verify_path()` function, which already splits the
path by directory separators, now treats backslashes as directory
separators _explicitly_ when `core.protectNTFS` is turned on, even on
platforms where the backslash is _not_ a directory separator.
Note that we have to repeat some code in `verify_path()`: if the
backslash is not a directory separator on the current Operating System,
we want to allow file names like `\`, but we _do_ want to disallow paths
that are clearly intended to cause harm when the repository is cloned on
Windows.
The `fsck_tree()` function (the other caller of `is_ntfs_dotgit()`) now
needs to look for backslashes in tree entries' names specifically when
`core.protectNTFS` is turned on. While it would be tempting to
completely disallow backslashes in that case (much like `fsck` reports
names containing forward slashes as "full paths"), this would be
overzealous: when `core.protectNTFS` is turned on in a non-Windows
setup, backslashes are perfectly valid characters in file names while we
_still_ want to disallow tree entries that are clearly designed to
exploit NTFS-specific behavior.
This simplification will make subsequent changes easier to implement,
such as turning `core.protectNTFS` on by default (not only on Windows)
or protecting against attack vectors involving NTFS Alternate Data
Streams.
Incidentally, this change allows for catching malicious repositories
that contain tree entries of the form `dir\.gitmodules` already on the
server side rather than only on the client side (and previously only on
Windows): in contrast to `is_ntfs_dotgit()`, the
`is_ntfs_dotgitmodules()` function already expects the caller to split
the paths by directory separators.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Previously, this function was completely undocumented. It is worth,
though, to explain what is going on, as it is not really obvious at all.
Suggested-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
"git rev-parse --git-path HEAD.lock" did not give the right path
when run in a secondary worktree.
* js/git-path-head-dot-lock-fix:
git_path(): handle `.lock` files correctly
t1400: wrap setup code in test case
Code clean-up and a bugfix in the logic used to tell worktree local
and repository global refs apart.
* sg/dir-trie-fixes:
path.c: don't call the match function without value in trie_find()
path.c: clarify two field names in 'struct common_dir'
path.c: mark 'logs/HEAD' in 'common_list' as file
path.c: clarify trie_find()'s in-code comment
Documentation: mention more worktree-specific exceptions
Ever since worktrees were introduced, the `git_path()` function _really_
needed to be called e.g. to get at the path to `logs/HEAD` (`HEAD` is
specific to the worktree, and therefore so is its reflog). However, the
wrong path is returned for `logs/HEAD.lock`.
This does not matter as long as the Git executable is doing the asking,
as the path for that `logs/HEAD.lock` file is constructed from
`git_path("logs/HEAD")` by appending the `.lock` suffix.
However, Git GUI just learned to use `--git-path` instead of appending
relative paths to what `git rev-parse --git-dir` returns (and as a
consequence not only using the correct hooks directory, but also using
the correct paths in worktrees other than the main one). While it does
not seem as if Git GUI in particular is asking for `logs/HEAD.lock`,
let's be safe rather than sorry.
Side note: Git GUI _does_ ask for `index.lock`, but that is already
resolved correctly, due to `update_common_dir()` preferring to leave
unknown paths in the (worktree-specific) git directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'logs/refs' is not a working tree-specific path, but since commit
b9317d55a3 (Make sure refs/rewritten/ is per-worktree, 2019-03-07)
'git rev-parse --git-path' has been returning a bogus path if a
trailing '/' is present:
$ git -C WT/ rev-parse --git-path logs/refs --git-path logs/refs/
/home/szeder/src/git/.git/logs/refs
/home/szeder/src/git/.git/worktrees/WT/logs/refs/
We use a trie data structure to efficiently decide whether a path
belongs to the common dir or is working tree-specific. As it happens
b9317d55a3 triggered a bug that is as old as the trie implementation
itself, added in 4e09cf2acf (path: optimize common dir checking,
2015-08-31).
- According to the comment describing trie_find(), it should only
call the given match function 'fn' for a "/-or-\0-terminated
prefix of the key for which the trie contains a value". This is
not true: there are three places where trie_find() calls the match
function, but one of them is missing the check for value's
existence.
- b9317d55a3 added two new keys to the trie: 'logs/refs/rewritten'
and 'logs/refs/worktree', next to the already existing
'logs/refs/bisect'. This resulted in a trie node with the path
'logs/refs/', which didn't exist before, and which doesn't have a
value attached. A query for 'logs/refs/' finds this node and then
hits that one callsite of the match function which doesn't check
for the value's existence, and thus invokes the match function
with NULL as value.
- When the match function check_common() is invoked with a NULL
value, it returns 0, which indicates that the queried path doesn't
belong to the common directory, ultimately resulting the bogus
path shown above.
Add the missing condition to trie_find() so it will never invoke the
match function with a non-existing value. check_common() will then no
longer have to check that it got a non-NULL value, so remove that
condition.
I believe that there are no other paths that could cause similar bogus
output. AFAICT the only other key resulting in the match function
being called with a NULL value is 'co' (because of the keys 'common'
and 'config'). However, as they are not in a directory that belongs
to the common directory the resulting working tree-specific path is
expected.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An array of 'struct common_dir' instances is used to specify whether
various paths in $GIT_DIR are specific to a worktree, or are common,
i.e. belong to main worktree. The names of two fields in this
struct are somewhat confusing or ambigious:
- The path is recorded in the struct's 'dirname' field, even though
several entries are regular files e.g. 'gc.pid', 'packed-refs',
etc.
Rename this field to 'path' to reduce confusion.
- The field 'exclude' tells whether the path is excluded... from
where? Excluded from the common dir or from the worktree? It
means the former, but it's ambigious.
Rename this field to 'is_common' to make it unambigious what it
means. This, however, means the exact opposite of what 'exclude'
meant, so we have to negate the field's value in all entries as
well.
The diff is best viewed with '--color-words'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'logs/HEAD', i.e. HEAD's reflog, is a file, but its entry in
'common_list' has the 'is_dir' bit set.
Unset that bit to make it consistent with what 'logs/HEAD' is supposed
to be.
This doesn't make a difference in behavior: check_common() is the only
function that looks at the 'is_dir' bit, and that function either
returns 0, or '!exclude', which for 'logs/HEAD' results in 0 as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A fairly long comment describes trie_find()'s behavior and shows
examples, but it's slightly incomplete/inaccurate. Update this
comment to specify how trie_find() handles a negative return value
from the given match function.
Furthermore, update the list of examples to include not only two but
three levels of path components. This makes the examples slightly
more complicated, but it can illustrate the behavior in more corner
cases.
Finally, basically everything refers to the data stored for a key as
"value", with two confusing exceptions:
- The type definition of the match function calls its corresponding
parameter 'data'.
Rename that parameter to 'value'. (check_common(), the only
function of this type already calls it 'value').
- The table of examples above trie_find() has a "val from node"
column, which has nothing to do with the value stored in the trie:
it's a "prefix of the key for which the trie contains a value"
that led to that node.
Rename that column header to "prefix to node".
Note that neither the original nor the updated description and
examples correspond 100% to the current implementation, because the
implementation is a bit buggy, but the comment describes the desired
behavior. The bug will be fixed in the last patch of this series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a function to strip the path suffix from a commit, but we don't
have one to check for a path suffix. For a plain filename, we can use
basename, but that requires an allocation, since POSIX allows it to
modify its argument. Refactor strip_path_suffix into a helper function
and a new function, ends_with_path_components, to meet this need.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" uses the refs/rewritten/ hierarchy to store its
intermediate states, which inherently makes the hierarchy per
worktree, but it didn't quite work well.
* nd/rewritten-ref-is-per-worktree:
Make sure refs/rewritten/ is per-worktree
files-backend.c: reduce duplication in add_per_worktree_entries_to_dir()
files-backend.c: factor out per-worktree code in loose_fill_ref_dir()
a9be29c981 (sequencer: make refs generated by the `label` command
worktree-local, 2018-04-25) adds refs/rewritten/ as per-worktree
reference space. Unfortunately (my bad) there are a couple places that
need update to make sure it's really per-worktree.
- add_per_worktree_entries_to_dir() is updated to make sure ref listing
look at per-worktree refs/rewritten/ instead of per-repo one [1]
- common_list[] is updated so that git_path() returns the correct
location. This includes "rev-parse --git-path".
This mess is created by me. I started trying to fix it with the
introduction of refs/worktree, where all refs will be per-worktree
without special treatments. Unfortunate refs/rewritten came before
refs/worktree so this is all we can do.
This also fixes logs/refs/worktree not being per-worktree.
[1] note that ref listing still works sometimes. For example, if you
have .git/worktrees/foo/refs/rewritten/bar AND the directory
.git/worktrees/refs/rewritten, refs/rewritten/bar will show up.
add_per_worktree_entries_to_dir() is only needed when the directory
.git/worktrees/refs/rewritten is missing.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.
* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs
The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.
* nd/per-worktree-ref-iteration:
git-worktree.txt: correct linkgit command name
reflog expire: cover reflog from all worktrees
fsck: check HEAD and reflog from other worktrees
fsck: move fsck_head_link() to get_default_heads() to avoid some globals
revision.c: better error reporting on ref from different worktrees
revision.c: correct a parameter name
refs: new ref types to make per-worktree refs visible to all worktrees
Add a place for (not) sharing stuff between worktrees
refs.c: indent with tabs, not spaces
Our handling of alternate object directories is needlessly different
from the main object directory. As a result, many places in the code
basically look like this:
do_something(r->objects->objdir);
for (odb = r->objects->alt_odb_list; odb; odb = odb->next)
do_something(odb->path);
That gets annoying when do_something() is non-trivial, and we've
resorted to gross hacks like creating fake alternates (see
find_short_object_filename()).
Instead, let's give each raw_object_store a unified list of
object_directory structs. The first will be the main store, and
everything after is an alternate. Very few callers even care about the
distinction, and can just loop over the whole list (and those who care
can just treat the first element differently).
A few observations:
- we don't need r->objects->objectdir anymore, and can just
mechanically convert that to r->objects->odb->path
- object_directory's path field needs to become a real pointer rather
than a FLEX_ARRAY, in order to fill it with expand_base_dir()
- we'll call prepare_alt_odb() earlier in many functions (i.e.,
outside of the loop). This may result in us calling it even when our
function would be satisfied looking only at the main odb.
But this doesn't matter in practice. It's not a very expensive
operation in the first place, and in the majority of cases it will
be a noop. We call it already (and cache its results) in
prepare_packed_git(), and we'll generally check packs before loose
objects. So essentially every program is going to call it
immediately once per program.
Arguably we should just prepare_alt_odb() immediately upon setting
up the repository's object directory, which would save us sprinkling
calls throughout the code base (and forgetting to do so has been a
source of subtle bugs in the past). But I've stopped short of that
here, since there are already a lot of other moving parts in this
patch.
- Most call sites just get shorter. The check_and_freshen() functions
are an exception, because they have entry points to handle local and
nonlocal directories separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a "char" in C is signed or unsigned is not specified, because it is
out of tradition "implementation dependent".
Therefore constructs like "if (name[i] < 0)" are not portable,
use "if (name[i] & 0x80)" instead.
Detected by "gcc (Raspbian 6.3.0-18+rpi1+deb9u1) 6.3.0 20170516" when
setting
DEVELOPER = 1
DEVOPTS = extra-all
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
