In run_am(), a strbuf is used to create a revision argument that is then
added to the argument list for git format-patch using strvec_push().
Use strvec_pushf() to add it directly instead, simplifying the code
and plugging a small leak on the error code path.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase --autosquash option is quietly ignored when used without
--interactive (apart from preventing preemptive fast-forwarding and
triggering conflicts with apply backend options).
Change that to support --autosquash without --interactive, by dropping
its restriction to REBASE_INTERACTIVE_EXCPLICIT mode. When used this
way, auto-squashing is done without opening the todo list editor.
Drop the -i requirement from the --autosquash description, and amend
t3415-rebase-autosquash.sh to test the option and the rebase.autoSquash
config variable with and without -i.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting the rebase.autoSquash config variable to true implies a couple
of restrictions: it prevents preemptive fast-forwarding and it triggers
conflicts with apply backend options. However, it only actually results
in auto-squashing when combined with the --interactive (or -i) option,
due to code in run_specific_rebase() that disables auto-squashing unless
the REBASE_INTERACTIVE_EXPLICIT flag is set.
Doing autosquashing for rebase.autoSquash without --interactive would be
problematic in terms of backward compatibility, but conversely, there is
no need for the aforementioned restrictions without --interactive.
So drop the options.config_autosquash check from the conditions for
clearing allow_preemptive_ff, as the case where it is combined with
--interactive is already covered by the REBASE_INTERACTIVE_EXPLICIT
flag check above it.
Also drop the "apply options are incompatible with rebase.autoSquash"
error, because it is unreachable if it is restricted to --interactive,
as apply options already cause an error when used with --interactive.
Drop the tests for the error from t3422-rebase-incompatible-options.sh,
which has separate tests for the conflicts of --interactive with apply
options.
When neither --autosquash nor --no-autosquash are given, only set
options.autosquash to true if rebase.autosquash is combined with
--interactive.
Don't initialize options.config_autosquash to -1, as there is no need to
distinguish between rebase.autoSquash being unset or explicitly set to
false.
Finally, amend the rebase.autoSquash documentation to say it only
affects interactive mode.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use parentheses and pipes to present alternatives in the argument help
for the --empty options of git am and git rebase, like in the rest of
the documentation.
While at it remove a stray use of the enum empty_action value
STOP_ON_EMPTY_COMMIT to indicate that no short option is present.
While it has a value of 0 and thus there is no user-visible change,
that enum is not meant to hold short option characters. Hard-code 0,
like we do for other options without a short option.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves it right next to parse_opt_empty(), which is a much more
logical place. As a side effect, this removes the need for a forward
declaration of imply_merge().
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At least after the successive trimming of enum rebase_type mentioned in
the previous commit, this code did exactly what imply_merge() does, so
just call it instead.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code's evolution left in some bits surrounding enum rebase_type that
don't really make sense any more. In particular, it makes no sense to
invoke imply_merge() if the type is already known not to be
REBASE_APPLY, and it makes no sense to assign the type after calling
imply_merge().
enum rebase_type had more values until commit a74b35081c ("rebase: drop
support for `--preserve-merges`") and commit 10cdb9f38a ("rebase: rename
the two primary rebase backends"). The latter commit also renamed
imply_interactive() to imply_merge().
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the commonly used initialization of the --stat-width=<width>,
--stat-name-width=<width> and --stat-graph-with=<width> parameters to their
internal default values into a helper function, to avoid repeating the same
initialization code in a few places.
Add a couple of tests to additionally cover existing configuration options
diff.statNameWidth=<width> and diff.statGraphWidth=<width> when used by
git-merge to generate --stat outputs. This closes the gap that existed
previously in the --stat tests, and reduces the chances for having any
regressions introduced by this commit.
While there, perform a small bunch of minor wording tweaks in the improved
unit test, to improve its test-level consistency a bit.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new configuration option diff.statNameWidth=<width> that is equivalent
to the command-line option --stat-name-width=<width>, but it is ignored
by format-patch. This follows the logic established by the already
existing configuration option diff.statGraphWidth=<width>.
Limiting the widths of names and graphs in the --stat output makes sense
for interactive work on wide terminals with many columns, hence the support
for these configuration options. They don't affect format-patch because
it already adheres to the traditional 80-column standard.
Update the documentation and add more tests to cover new configuration
option diff.statNameWidth=<width>. While there, perform a few minor code
and whitespace cleanups here and there, as spotted.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
Move functions that are not about pure string manipulation out of
strbuf.[ch]
* cw/strbuf-cleanup:
strbuf: remove global variable
path: move related function to path
object-name: move related functions to object-name
credential-store: move related functions to credential-store file
abspath: move related functions to abspath
strbuf: clarify dependency
strbuf: clarify API boundary
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a library that only interacts with other primitives, strbuf should
not utilize the comment_line_char global variable within its
functions. Therefore, add an additional parameter for functions that use
comment_line_char and refactor callers to pass it in instead.
strbuf_stripspace() removes the skip_comments boolean and checks if
comment_line_char is a non-NUL character to determine whether to skip
comments or not.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
Clean-up of the code path that deals with merge strategy option
handling in "git rebase".
* pw/rebase-cleanup-merge-strategy-option-handling:
rebase: remove a couple of redundant strategy tests
rebase -m: fix serialization of strategy options
rebase -m: cleanup --strategy-option handling
sequencer: use struct strvec to store merge strategy options
rebase: stop reading and writing unnecessary strategy state
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling "--strategy-option" rebase collects the commands into a
struct string_list, then concatenates them into a string, prepending "--"
to each one before splitting the string and removing the "--" prefix.
This is an artifact of the scripted rebase and the need to support
"rebase --preserve-merges". Now that "--preserve-merges" no-longer
exists we can cleanup the way the argument is handled.
The tests for a bad strategy option are adjusted now that
parse_strategy_opts() is no-longer called when starting a rebase. The
fact that it only errors out when running "git rebase --continue" is a
mixed blessing but the next commit will fix the root cause of the
parsing problem so lets not worry about that here.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The state files for "--strategy" and "--strategy-option" are written and
read twice, once by builtin/rebase.c and then by sequencer.c. This is an
artifact of the scripted rebase and the need to support "rebase
--preserve-merges". Now that "--preserve-merges" no-longer exists we
only need to read and write these files in sequencer.c. This enables us
to remove a call to free() in read_strategy_opts() that was added by
f1f4ebf432 (sequencer.c: fix "opts->strategy" leak in
read_strategy_opts(), 2022-11-08) as this commit fixes the root cause of
that leak.
There is further scope for removing duplication in the reading and
writing of state files between builtin/rebase.c and sequencer.c but that
is left for a follow up series.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Streamline --rebase-merges command line option handling and
introduce rebase.merges configuration variable.
* ah/rebase-merges-config:
rebase: add a config option for --rebase-merges
rebase: deprecate --rebase-merges=""
rebase: add documentation and test for --no-rebase-merges
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"diff.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit-reach.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of the new option is to accommodate users who would like
--rebase-merges to be on by default and to facilitate turning on
--rebase-merges by default without configuration in a future version of
Git.
Name the new option rebase.rebaseMerges, even though it is a little
redundant, for consistency with the name of the command line option and
to be clear when scrolling through values in the [rebase] section of
.gitconfig.
Support setting rebase.rebaseMerges to the nonspecific value "true" for
users who don't need to or don't want to learn about the difference
between rebase-cousins and no-rebase-cousins.
Make --rebase-merges without an argument on the command line override
any value of rebase.rebaseMerges in the configuration, for consistency
with other command line flags with optional arguments that have an
associated config option.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unusual syntax --rebase-merges="" (that is, --rebase-merges with an
empty string argument) has been an undocumented synonym of
--rebase-merges without an argument. Deprecate that syntax to avoid
confusion when a rebase.rebaseMerges config option is introduced, where
rebase.rebaseMerges="" will be equivalent to --no-rebase-merges.
It is not likely that anyone is actually using this syntax, but just in
case, deprecate the empty string argument instead of dropping support
for it immediately.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" honors the src/dst prefixes set to nonstandard
values with configuration variables like "diff.noprefix", causing
receiving end of the patch that expects the standard -p1 format to
break. Teach "format-patch" to ignore end-user configuration and
always use the standard prefixes.
This is a backward compatibility breaking change.
* jk/format-patch-ignore-noprefix:
rebase: prefer --default-prefix to --{src,dst}-prefix for format-patch
format-patch: add format.noprefix option
format-patch: do not respect diff.noprefix
diff: add --default-prefix option
t4013: add tests for diff prefix options
diff: factor out src/dst prefix setup
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-rebase invokes format-patch, it wants to make sure we use the
normal prefixes, and are not confused by diff.noprefix or similar. When
this was added in 5b220a6876 (Add --src/dst-prefix to git-formt-patch
in git-rebase.sh, 2010-09-09), we only had --src-prefix and --dst-prefix
to do so, which requires re-specifying the prefixes we expect to see.
These days we can say what we want more directly: just use the defaults.
This is a minor cleanup that should have no behavior change, but
hopefully the result expresses more clearly what the code is trying to
accomplish.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config option (as documented) for rebase.autoSquash has a capital S,
whereas the command line option has a small case s.
Cf. <20220617100309.3224-1-worldhello.net@gmail.com>
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "strategy_opts" member was added in ba1905a5fe (builtin
rebase: add support for custom merge strategies, 2018-09-04) the
corresponding free() for it at the end of cmd_rebase() wasn't added,
let's do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the existing "squash_onto_name" added in [1] we need to
free() the xstrdup()'d "options.onto.name" added for "--keep-base" in
[2]..
1. 9dba809a69 (builtin rebase: support --root, 2018-09-04)
2. 414d924beb (rebase: teach rebase --keep-base, 2019-08-27)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the replay_opts_release() function added in the preceding commit
non-static, and use it for freeing the "struct replay_opts"
constructed for "rebase" and "revert".
To safely call our new replay_opts_release() we'll need to stop
calling it in sequencer_remove_state(), and instead call it where we
allocate the "struct replay_opts" itself.
This is because in e.g. do_interactive_rebase() we construct a "struct
replay_opts" with "get_replay_opts()", and then call
"complete_action()". If we get far enough in that function without
encountering errors we'll call "pick_commits()" which (indirectly)
calls sequencer_remove_state() at the end.
But if we encounter errors anywhere along the way we'd punt out early,
and not free() the memory we allocated. Remembering whether we
previously called sequencer_remove_state() would be a hassle.
Using a FREE_AND_NULL() pattern would also work, as it would be safe
to call replay_opts_release() repeatedly. But let's fix this properly
instead, by having the owner of the data free() it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a "goto cleanup" pattern in do_interactive_rebase(). This
eliminates some duplicated free() code added in 53bbcfbde7 (rebase
-i: implement the main part of interactive rebase as a builtin,
2018-09-27), and sets us up for a subsequent commit which'll make
further use of the "cleanup" label.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When config which selects the merge backend (currently,
rebase.autosquash=true or rebase.updateRefs=true) conflicts with other
options on the command line (such as --whitespace=fix), make the error
message specifically call out the config option and specify how to
override that config option on the command line.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>