The current code just leaves the transport in whatever state
it was in after performing the fetch. For a non-empty clone
over the git protocol, the transport code already
disconnects at the end of the fetch.
But for an empty clone, we leave the connection hanging, and
eventually close the socket when clone exits. This causes
the remote upload-pack to complain "the remote end hung up
unexpectedly". While this message is harmless to the clone
itself, it is unnecessarily scary for a user to see and may
pollute git-daemon logs.
This patch just explicitly calls disconnect after we are
done with the remote end, which sends a flush packet to
upload-pack and cleanly disconnects, avoiding the error
message.
Other transports are unaffected or slightly improved:
- for a non-empty repo over the git protocol, the second
disconnect is a no-op (since we are no longer connected)
- for "walker" transports (like HTTP or FTP), we actually
free some used memory (which previously just sat until
the clone process exits)
- for "rsync", disconnect is always a no-op anyway
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file is no longer used since 54bc13c (t8005: Nobody writes Russian in
shift_jis, 2009-06-18).
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
In 0392513 (add-interactive: refactor mode hunk handling, 2009-04-16),
we merged the interaction loops for mode changes and hunk staging.
This was fine at the time, because 0beee4c (git-add--interactive:
remove hunk coalescing, 2008-07-02) removed hunk coalescing.
However, in 7a26e65 (Revert "git-add--interactive: remove hunk
coalescing", 2009-05-16), we resurrected it. Since then, the code
would attempt in vain to merge mode changes with diff hunks,
corrupting both in the process.
We add a check to the coalescing loop to ensure it only looks at diff
hunks, thus skipping mode changes.
Noticed-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to stage changes to file which has also pending `chmod +x`,
`git add -p` produces lots of 'Use of uninitialized value ...' warnings
and fails to do the job:
$ echo content >> file
$ chmod +x file
$ git add -p
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
old mode 100644
new mode 100755
Stage mode change [y,n,q,a,d,/,j,J,g,?]? y
@@ -0,0 +1 @@
+content
Stage this hunk [y,n,q,a,d,/,K,g,e,?]? y
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
Use of uninitialized value $ofs in numeric le (<=) at .../git-add--interactive line 806.
Use of uninitialized value $o0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $n0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
fatal: corrupt patch at line 5
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
@@ -,0 + @@
+content
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We traditionally allowed a mbox file or a directory name of a maildir (but
never an individual file inside a maildir) to be given to "git am". Even
though an individual file in a maildir (or more generally, a piece of
RFC2822 e-mail) is not a mbox file, it contains enough information to
create a commit out of it, so there is no reason to reject one. Running
mailsplit on such a file feels stupid, but it does not hurt.
This builds on top of a5a6755 (git-am foreign patch support: introduce
patch_format, 2009-05-27) that introduced mailbox format detection. The
codepath to deal with a mbox requires it to begin with "From " line and
also allows it to begin with "From: ", but a random piece of e-mail can
and often do begin with any valid RFC2822 header lines.
Instead of checking the first line, we extract all the lines up to the
first empty line, and make sure they look like e-mail headers.
A test is added to t4150 to demonstrate this feature.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously when merging directly from a local tracking
branch like:
git merge origin/master
The merge message said:
Merge commit 'origin/master'
* commit 'origin/master':
...
Instead, let's be more explicit about what we are merging:
Merge remote branch 'origin/master'
* origin/master:
...
We accomplish this by recognizing remote tracking branches
in git-merge when we build the simulated FETCH_HEAD output
that we feed to fmt-merge-msg.
In addition to a new test in t7608, we have to tweak the
expected output of t3409, which does such a merge.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have both a tag and a branch named "foo", then calling
"git merge foo" will warn about the ambiguous ref, but merge
the tag.
When generating the commit message, though, we simply
checked whether "refs/heads/foo" existed, and if it did,
assumed it was a branch. This led to the statement "Merge
branch 'foo'" in the commit message, which is quite wrong.
Instead, we should use dwim_ref to find the actual ref used,
and describe it appropriately.
In addition to the test in t7608, we must also tweak the
expected output of t4202, which was accidentally triggering
this bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git merge $X", we automatically generate a
commit message containing something like "Merge branch
'$X'". This test script checks that those messages say what
they should, and exposes a failure when merging a refname
that is ambiguous between a tag and a branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test ignored the exit status from verify pack command, and also relied
on not seeing any delta chain statistics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configuration values are expected to be quoted when they have leading or
trailing whitespace, but inner whitespace should be kept verbatim even if
the value is not quoted. This is already documented in git-config(1), but
the code caused inner whitespace to be collapsed to a single space,
breaking, for example, clones from a path that has two consecutive spaces
in it, as future fetches would only see a single space.
Reported-by: John te Bokkel <tanj.tanj@gmail.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a branch moves A to B while the other branch created B (or moved C to
B), the code tried to rename one of them to B~something to preserve both
versions, and failed to register temporary resolution for the original
path B at stage#0 during virtual ancestor computation. This left the
index in unmerged state and caused a segfault.
A better solution is to merge these two versions of B's in place and use
the (potentially conflicting) result as the intermediate merge result in
the virtual ancestor.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the case where an untracked symlink that points at a directory
with tracked paths confuses the checkout logic, demostrated in t6035.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
longest_path_match() in symlinks.c does exactly what it's name says,
but in some cases that match can be too long, since the
has_*_leading_path() functions assumes that the match will newer be as
long as the name string given to the function.
fix this by adding an extra if test which checks if the match length
is equal to the 'len' parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test creates two directories, a/b and a/b-2, then replaces a/b with
a symlink to a/b-2, then merges that change into the 'baseline' commit,
which contains an unrelated change.
There are two bugs:
1. 'git checkout' incorrectly deletes work tree file a/b-2/d.
2. 'git merge' incorrectly deletes work tree file a/b-2/d.
The test goes on to create another branch in which a/b-2 is replaced
with a symlink to a/b (i.e., the reverse of what was done the first
time), and merge it into the 'baseline' commit.
There is a different bug:
3. The merge should be clean, but git reports a conflict.
Signed-off-by: James Pickens <james.e.pickens@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have an embedded git work tree in your work tree (be it
an orphaned submodule, or an independent checkout of an unrelated
project), "git clean -d -f" blindly descended into it and removed
everything. This is rarely what the user wants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git svn gc" will not compress unhandled.log files if
Compress::Zlib is missing. However, leftover index files should
always be removed, so add a test for this behavior as well.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* en/fast-export:
fast-export: Document the fact that git-rev-list arguments are accepted
Add new fast-export testcases
fast-export: Add a --tag-of-filtered-object option for newly dangling tags
fast-export: Do parent rewriting to avoid dropping relevant commits
fast-export: Make sure we show actual ref names instead of "(null)"
fast-export: Omit tags that tag trees
fast-export: Set revs.topo_order before calling setup_revisions
This was introduced in 0b2af457a4
("Fix branch detection when repository root is inaccessible")
but reintroduced in the previous commit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This reverts the --minimize-url behavior change that
appeared recently in commit 0b2af457a4
("Fix branch detection when repository root is inaccessible").
However, we now allow the option to be turned off by allowing
"--no-minimize-url" so people with limited-access setups can
still take advantage of the fix in
0b2af457a4.
Also document the behavior and default settings of minimize-url
in the manpage for the first time.
This introduces a temporary UI regression to allow t9141 to pass
that will be reverted (fixed) in the next commit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Add a git svn gc command that gzips all unhandled.log files, and
removes all index files under .git/svn.
Signed-off-by: Robert Allan Zeh <robert.a.zeh@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The second and third tests of this script expected that Russian strings
are converted between ISO-8859-5 and Shift_JIS in the "blame --porcelain"
format output correctly.
Sure, many platforms may convert between such a combination, but that is
only because one of the base character set of Shift_JIS, JIS X 0208,
defines codepoints for Russian characters (among others); I do not think
anybody uses Shift_JIS when seriously writing Russian, and it is perfectly
understandable if iconv() libraries on some platforms fail converting
between this combination, as it does not matter in reality.
This patch changes the test to verify Japanese strings are converted
correctly between EUC-JP and Shift_JIS in the same procedure. The point
of the test is not about verifying the platform's iconv() library, but to
see if "git blame" makes correct iconv() library calls when it should.
We could instead use ISO-8859-5 and KOI8-R as the combination, because
they are both meant to represent Russian, in order to make this test
meaningful on more platforms, but we already use Shift_JIS vs EUC-JP
combinations to test other programs in our test suite, so this combination
is safer from the point of view of the portability. Besides, I do not
read nor write Russian; sorry ;-)
This change allows tests to pass on my (friend's) Solaris 5.11 box.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
735c674 (Trailing whitespace and no newline fix, 2009-07-22) completely
broke --whitespace=fix, causing it to lose all the empty lines in a patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-graft-unhide-true-parents:
git repack: keep commits hidden by a graft
Add a test showing that 'git repack' throws away grafted-away parents
Conflicts:
git-repack.sh
* av/maint-config-reader:
After renaming a section, print any trailing variable definitions
Make section_name_match start on '[', and return the length on success
When you have grafts that pretend that a given commit has different
parents than the ones recorded in the commit object, it is dangerous
to let 'git repack' remove those hidden parents, as you can easily
remove the graft and end up with a broken repository.
So let's play it safe and keep those parent objects and everything
that is reachable by them, in addition to the grafted parents.
As this behavior can only be triggered by git pack-objects, and as that
command handles duplicate parents gracefully, we do not bother to cull
duplicated parents that may result by using both true and grafted
parents.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
