Join message displayed during repository initialization in one entire
sentence. That would improve translations since it's easier translate
an entire sentence than translating each piece.
Update Icelandic translation to reflect the changes. The Icelandic
translation of these messages is used with test
t0204-gettext-reencode-sanity.sh and not updating the translation would
fail the test.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
We check our templates to make sure they are from a
version of git we understand (otherwise we would init a
repository we cannot ourselves run in!). But our simple
integer check has fallen behind the times. Let's use the
helpers that setup.c provides to do it right.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It would be useful to control access to the global
shared_repository, so that we can lazily load its config.
The first step to doing so is to make sure all access
goes through a set of functions.
This step is purely mechanical, and should result in no
change of behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When setup_git_directory() is called, we set a flag in
startup_info to indicate we have a repository. But there are
a few other mechanisms by which we might set up a repo:
1. When creating a new repository via init_db(), we
transition from no-repo to being in a repo. We should
tweak this flag at that moment.
2. In enter_repo(), a stricter form of
setup_git_directory() used by server-side programs, we
check the repository format config. After doing so, we
know we're in a repository, and can set the flag.
With these changes, library code can now reliably tell
whether we are in a repository and act accordingly. We'll
leave the "prefix" field as NULL, which is what happens when
setup_git_directory() finds there is no prefix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename git_config_set_or_die functions to git_config_set, leading
to the new default behavior of dying whenever a configuration
error occurs.
By now all callers that shall die on error have been transitioned
to the _or_die variants, thus making this patch a simple rename
of the functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating an empty repository with `git init-db` we do not
check for error codes returned by `git_config_set` functions.
This may cause the user to end up with an inconsistent repository
without any indication for the user.
Fix this problem by dying early with an error message when we are
unable to write the configuration files to disk.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Soon we will want to create initdb functions for ref backends, and
code from initdb that calls this function needs to move into the files
backend. So this function needs to be public.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
The init code predates strbufs, and uses PATH_MAX-sized
buffers along with many manual checks on intermediate sizes
(some of which make magic assumptions, such as that init
will not create a path inside .git longer than 50
characters).
We can simplify this greatly by using strbufs, which drops
some hard-to-verify strcpy calls in favor of git_path_buf.
While we're in the area, let's also convert existing calls
to git_path to the safer git_path_buf (our existing calls
were passed to pretty tame functions, and so were not a
problem, but it's easy to be consistent and safe here).
Note that we had an explicit test that "git init" rejects
long template directories. This comes from 32d1776 (init: Do
not segfault on big GIT_TEMPLATE_DIR environment variable,
2009-04-18). We can drop the test_must_fail here, as we now
accept this and need only confirm that we don't segfault,
which was the original point of the test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are initializing a .git directory, we may call
probe_utf8_pathname_composition to detect utf8 mangling. We
pass in a path buffer for it to use, and it blindly
strcpy()s into it, not knowing whether the buffer is large
enough to hold the result or not.
In practice this isn't a big deal, because the buffer we
pass in already contains "$GIT_DIR/config", and we append
only a few extra bytes to it. But we can easily do the right
thing just by calling git_path_buf ourselves. Technically
this results in a different pathname (before we appended our
utf8 characters to the "config" path, and now they get their
own files in $GIT_DIR), but that should not matter for our
purposes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes sprintf into fixed-size buffers when we know
that the buffer is large enough to fit the input (either
because it's a constant, or because it's numeric input that
is bounded in size). Likewise with strcpy of constant
strings.
However, these sites make it hard to audit sprintf and
strcpy calls for buffer overflows, as a reader has to
cross-reference the size of the array with the input. Let's
use xsnprintf instead, which communicates to a reader that
we don't expect this to overflow (and catches the mistake in
case we do).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callsites covered by this change call write_file() or
write_file_gently() to create a one-liner file. Drop the caller
supplied LF and let these callees to append it as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers except three passed 1 for the "fatal" parameter to ask
this function to die upon error, but to a casual reader of the code,
it was not all obvious what that 1 meant. Instead, split the
function into two based on a common write_file_v() that takes the
flag, introduce write_file_gently() as a new way to attempt creating
a file without dying on error, and make three callers to call it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some functions from the refs module were still declared in cache.h.
Move them to refs.h.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
We avoid setting core.worktree when the repository location is the
".git" directory directly at the top level of the working tree, but
the code misdetected the case in which the working tree is at the
root level of the filesystem (which arguably is a silly thing to
do, but still valid).
* jk/init-core-worktree-at-root:
init: don't set core.worktree when initializing /.git
If you create a git repository in the root directory with
"git init /", we erroneously write a core.worktree entry.
This isn't _wrong_, in the sense that it's OK to set
core.worktree when we don't need to. But it is unnecessarily
surprising if you later move the .git directory to another
path (which usually moves the relative working tree, but is
foiled if there is an explicit worktree set).
The problem is that we check whether core.worktree is
necessary by seeing if we can make the git_dir by
concatenating "/.git" onto the working tree. That would lead
to "//.git" in this instance, but we actually have "/.git"
(without the doubled slash).
We can fix this by special-casing the root directory. I also
split the logic out into its own function to make the
conditional a bit more readable (and used skip_prefix, which
I think makes it a little more obvious what is going on).
No tests, as we would need to be able to write to "/" to do
so. I did manually confirm that:
sudo git init /
cd /
git rev-parse --show-toplevel
git config core.worktree
still finds the top-level correctly (as "/"), and does not
set any core.worktree variable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function sometimes returned a non-freeable memory and some
other times returned a piece of memory that must be freed.
* jc/exec-cmd-system-path-leak-fix:
system_path(): always return free'able memory to the caller
Some filesystems assign filemodes in a strange way, fooling then
automatic "filemode trustability" check done during a new
repository creation.
* tb/config-core-filemode-check-on-broken-fs:
init-db: improve the filemode trustability check
This fixes common problems in these code about error handling,
forgetting to close the file handle after fprintf() fails, or not
printing out the error string..
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function sometimes returns a newly allocated string and
sometimes returns a borrowed string, the latter of which the callers
must not free(). The existing callers all assume that the return
value belongs to the callee and most of them copy it with strdup()
when they want to keep it around. They end up leaking the returned
copy when the callee returned a new string because they cannot tell
if they should free it.
Change the contract between the callers and system_path() to make
the returned string owned by the callers; they are responsible for
freeing it when done, but they do not have to make their own copy to
store it away.
Adjust the callers to make sure they do not leak the returned string
once they are done, but do not bother freeing it just before dying,
exiting or exec'ing other program to avoid unnecessary churn.
Reported-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some file systems do not support the executable bit:
a) The user executable bit is always 0, e.g. VFAT mounted with
-onoexec
b) The user executable bit is always 1, e.g. cifs mounted with
-ofile_mode=0755
c) There are system where user executable bit is 1 even if it
should be 0 like b), but the file mode can be maintained
locally. chmod -x changes the file mode from 0766 to 0666,
until the file system is unmounted and remounted and the file
mode is 0766 again.
This been observed when a Windows machine with NTFS exports a share to
Mac OS X via smb or afp.
Case a) and b) are handled by the current code. Case c) qualifies
as "non trustable executable bit" and core.filemode should be false,
but this is currently not done.
Detect when ".git/config" has the user executable bit set after
creat(".git/config", 0666) and set core.filemode to false. Because
the permission bits on the file is whatever the end user already had
when we are asked to reinitialise an existing repository, and do not
give any information on the filesystem behaviour, do this only when
running "git init" to create a new repository.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since time immemorial, the test of whether to set "core.filemode"
has been done by trying to toggle the u+x bit on $GIT_DIR/config,
which we know always exists, and then testing whether the change
"took". I find it somewhat odd to use the config file for this
test, but whatever.
The test code didn't set the u+x bit back to its original state
itself, instead relying on the subsequent call to git_config_set()
to re-write the config file with correct permissions.
But ever since
daa22c6f8d config: preserve config file permissions on edits (2014-05-06)
git_config_set() copies the permissions from the old config file to
the new one. This is a good change in and of itself, but it
invalidates the create_default_files()'s assumption, causing "git
init" to leave the executable bit set on $GIT_DIR/config.
Reset the permissions on $GIT_DIR/config when we are done with the
test in create_default_files().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce the use of fixed sized buffer passed to getcwd() calls
by introducing xgetcwd() helper.
* rs/strbuf-getcwd:
use strbuf_add_absolute_path() to add absolute paths
abspath: convert absolute_path() to strbuf
use xgetcwd() to set $GIT_DIR
use xgetcwd() to get the current directory or die
wrapper: add xgetcwd()
abspath: convert real_path_internal() to strbuf
abspath: use strbuf_getcwd() to remember original working directory
setup: convert setup_git_directory_gently_1 et al. to strbuf
unix-sockets: use strbuf_getcwd()
strbuf: add strbuf_getcwd()
Instead of dying of a segmentation fault if getcwd() returns NULL, use
xgetcwd() to make sure to write a useful error message and then exit
in an orderly fashion.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several calls of getcwd() and die() to use xgetcwd() instead.
This way we get rid of fixed-size buffers (which can be too small
depending on the used file system) and gain consistent error messages.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Feeding the result of a real_path() call to real_path() again doesn't
change that result -- the returned path won't get any more real. Avoid
such a double call in set_git_dir_init() and for the same reason stop
calling real_path() before feeding paths to set_git_work_tree(), as the
latter already takes care of that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When extract l10n messages, we use "--add-comments" option to keep
comments right above the l10n messages for references. But sometimes
irrelevant comments are also extracted. For example in the following
code block, the comment in line 2 will be extracted as comment for the
l10n message in line 3, but obviously it's wrong.
{ OPTION_CALLBACK, 0, "ignore-removal", &addremove_explicit,
NULL /* takes no arguments */,
N_("ignore paths removed in the working tree (same as
--no-all)"),
PARSE_OPT_NOARG, ignore_removal_cb },
Since almost all comments for l10n translators are marked with the same
prefix (tag): "TRANSLATORS:", it's safe to only extract comments with
this special tag. I.E. it's better to call xgettext as:
xgettext --add-comments=TRANSLATORS: ...
Also tweaks the multi-line comment in "init-db.c", to make it start with
the proper tag, not "* TRANSLATORS:" (which has a star before the tag).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up and protection against concurrent write access to the
ref namespace.
* mh/safe-create-leading-directories:
rename_tmp_log(): on SCLD_VANISHED, retry
rename_tmp_log(): limit the number of remote_empty_directories() attempts
rename_tmp_log(): handle a possible mkdir/rmdir race
rename_ref(): extract function rename_tmp_log()
remove_dir_recurse(): handle disappearing files and directories
remove_dir_recurse(): tighten condition for removing unreadable dir
lock_ref_sha1_basic(): if locking fails with ENOENT, retry
lock_ref_sha1_basic(): on SCLD_VANISHED, retry
safe_create_leading_directories(): add new error value SCLD_VANISHED
cmd_init_db(): when creating directories, handle errors conservatively
safe_create_leading_directories(): introduce enum for return values
safe_create_leading_directories(): always restore slash at end of loop
safe_create_leading_directories(): split on first of multiple slashes
safe_create_leading_directories(): rename local variable
safe_create_leading_directories(): add explicit "slash" pointer
safe_create_leading_directories(): reduce scope of local variable
safe_create_leading_directories(): fix format of "if" chaining
safe_create_leading_directories_const() returns a non-zero value on
error. The old code at this calling site recognized a couple of
particular error values, and treated all other return values as
success. Instead, be more conservative: recognize the errors we are
interested in, but treat any other nonzero values as failures. This
is more robust in case somebody adds another possible return value
without telling us.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of returning magic integer values (which a couple of callers
go to the trouble of distinguishing), return values from an enum. Add
a docstring.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris systems we'd warn about an implicit cast of mode_t when we
printed things out with the %d format. We'd get this warning under GCC
4.6.0 with Solaris headers:
builtin/init-db.c: In function ‘separate_git_dir’:
builtin/init-db.c:354:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘mode_t’ [-Wformat]
We've been doing this ever since v1.7.4.1-296-gb57fb80. Just work
around this by adding an explicit cast.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function was not gentle at all to the callers and died without giving
them a chance to deal with possible errors. Rename it to read_gitfile(),
and update all the callers.
As no existing caller needs a true "gently" variant, we do not bother
adding one at this point.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the init-db messages that were added in v1.7.5-rc1~16^2 (init,
clone: support --separate-git-dir for .git file) by Nguyễn Thái Ngọc
Duy for translation.
This requires splitting up the tests that the patch added so that
certain parts of them can be skipped unless the C_LOCALE_OUTPUT
prerequisite is satisfied.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages could benefit from splitting up. An earlier version of
this patch began like this:
const char *reinit_shared = _("Reinitialized existing shared Git repository in %s\n");
const char *init_shared = _("Initialized empty shared Git repository in %s\n");
const char *reinit_noshared = _("Reinitialized existing Git repository in %s\n");
const char *init_noshared = _("Initialized empty Git repository in %s\n");
But in the first round of gettextization I'm aiming to keep code
changes to a minimum for ease of review. So just add a comment
explaining to translators how the sprintf format gets used so they
can cope for now if the language's grammar allows.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the user visible strings in init-db.c to use gettext
localizations. This only converts messages which needed to be changed
from "foo" to _("foo"), and didn't need any TRANSLATORS comments.
I haven't marked the messages in init_db_usage or init_db_options for
translation, since that would require additional changes in
parse-options.c. Those can be done later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_dir must always be non-NULL so "if (git_dir)" is unnecessary.
Before this code, if git_dir == NULL, it will default to
DEFAULT_GIT_DIR_ENVIRONMENT.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also corrects a wrong description for clone.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This logic is now only used by cmd_init_db(). setup_* functions do not
rely on it any more. Move all the logic to cmd_init_db() and turn
get_git_work_tree() into a simple function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
