The option --invert-grep is documented to filter out commits whose
messages match the --grep filters. However, it also affects the
header matches (--author, --committer), which is not intended.
Move the handling of that option to grep.c, as only the code there can
distinguish between matches in the header from those in the message
body. If --invert-grep is given then enable extended expressions (not
the regex type, we just need git grep's --not to work), negate the body
patterns and check if any of them match by piggy-backing on the
collect_hits mechanism of grep_source_1().
Collecting the matches in struct grep_opt is a bit iffy, but with
"last_shown" we have a precedent for writing state information to that
struct.
Reported-by: Dotan Cohen <dotancohen@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --grep=string --author=name" learns to highlight hits just
like "git grep string" does.
* hm/paint-hits-in-log-grep:
grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data
pretty: colorize pattern matches in commit messages
grep: refactor next_match() and match_one_pattern() for external use
"git grep --recurse-submodules" takes trees and blobs from the
submodule repository, but the textconv settings when processing a
blob from the submodule is not taken from the submodule repository.
A test is added to demonstrate the issue, without fixing it.
* mt/grep-submodule-textconv:
grep: demonstrate bug with textconv attributes and submodules
This function was removed in 0579f91dd7 (grep: enable threading with
-p and -W using lazy attribute lookup, 2011-12-12), but not its
corresponding *.h declaration.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These changes are made in preparation of, the colorization support for the
"git log" subcommands that, rely on regex functionality (i.e. "--author",
"--committer" and "--grep"). These changes are necessary primarily because
match_one_pattern() expects header lines to be prefixed, however, in
pretty, the prefixes are stripped from the lines because the name-email
pairs need to go through additional parsing, before they can be printed and
because next_match() doesn't handle the case of
"ctx == GREP_CONTEXT_HEAD" at all. So, teach next_match() how to handle the
new case and move match_one_pattern()'s core logic to
headerless_match_one_pattern() while preserving match_one_pattern()'s uses
that depend on the additional processing.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some circumstances, "git grep --textconv --recurse-submodules"
ignores the textconv attributes from the submodules and erroneously
applies the attributes defined in the superproject on the submodules'
files. The textconv cache is also saved on the superproject, even for
submodule objects.
A fix for these problems will probably require at least three changes:
- Some textconv and attributes functions (as well as their callees) will
have to be adjusted to work with arbitrary repositories. Note that
"fill_textconv()", for example, already receives a "struct repository"
but it writes the textconv cache using "write_loose_object()", which
implicitly works on "the_repository".
- grep.c functions will have to call textconv/userdiff routines passing
the "repo" field from "struct grep_source" instead of the one from
"struct grep_opt". The latter always points to "the_repository" on
"git grep" executions (see its initialization in builtin/grep.c), but
the former points to the correct repository that each source (an
object, file, or buffer) comes from.
- "userdiff_find_by_path()" might need to use a different attributes
stack for each repository it works on or reset its internal static
stack when the repository is changed throughout the calls.
For now, let's add some tests to demonstrate these problems, and also
update a NEEDSWORK comment in grep.h that mentions this bug to reference
the added tests.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our grep_buffer() function takes a non-const buffer, which is confusing:
we don't take ownership of nor write to the buffer.
This mostly comes from the fact that the underlying grep_source struct
in which we store the buffer uses non-const pointer. The memory pointed
to by the struct is sometimes owned by us (for FILE or OID sources), and
sometimes not (for BUF sources).
Let's store it as const, which lets us err on the side of caution (i.e.,
the compiler will warn us if any of our code writes to or tries to free
it).
As a result, we must annotate the one place where we do free it by
casting away the constness. But that's a small price to pay for the
extra safety and clarity elsewhere (and indeed, it already had a comment
explaining why GREP_SOURCE_BUF _didn't_ free it).
And then we can mark grep_buffer() as taking a const buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Record the repository whenever an OID grep source is created, and teach
the worker threads to explicitly provide the repository when accessing
objects.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep_source_init() can create "struct grep_source" objects and,
depending on the value of the type passed, some void-pointer parameters have
different meanings. Because one of these types (GREP_SOURCE_OID) will
require an additional parameter in a subsequent patch, take the
opportunity to increase clarity and type safety by replacing this
function with individual functions for each type.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the setup of the "pcre2_general_context" to happen per-thread
in compile_pcre2_pattern() instead of in grep_init().
This change brings it in line with how the rest of the pcre2_* members
in the grep_pat structure are set up.
As noted in the preceding commit the approach 513f2b0bbd (grep: make
PCRE2 aware of custom allocator, 2019-10-16) took to allocate the
pcre2_general_context seems to have been initially based on a
misunderstanding of how PCREv2 memory allocation works.
The approach of creating a global context in grep_init() is just added
complexity for almost zero gain. On my system it's 24 bytes saved
per-thread. For comparison PCREv2 will then go on to allocate at least
a kilobyte for its own thread-local state.
As noted in 6d423dd542 (grep: don't redundantly compile throwaway
patterns under threading, 2017-05-25) the grep code is intentionally
not trying to micro-optimize allocations by e.g. sharing some PCREv2
structures globally, while making others thread-local.
So let's remove this special case and make all of them thread-local
again for simplicity. With this change we could move the
pcre2_{malloc,free} functions around to live closer to their current
use. I'm not doing that here to keep this change small, that cleanup
will be done in a follow-up commit.
See also the discussion in 94da9193a6 (grep: add support for PCRE v2,
2017-06-01) about thread safety, and Johannes's comments[1] to the
effect that we should be doing what this patch is doing.
1. https://lore.kernel.org/git/nycvar.QRO.7.76.6.1908052120302.46@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of the pcre2_maketables_free() function to free the memory
allocated by pcre2_maketables().
At first sight it's strange that 10da030ab7 (grep: avoid leak of
chartables in PCRE2, 2019-10-16) which added the free() call here
doesn't make use of the pcre2_free() the author introduced in the
preceding commit in 513f2b0bbd (grep: make PCRE2 aware of custom
allocator, 2019-10-16).
The reason is that at the time the function didn't exist. It was first
introduced in PCREv2 version 10.34, released on 2019-11-21.
Let's make use of it behind a macro. I don't think this matters for
anything to do with custom allocators, but it makes our use of PCREv2
more discoverable.
At some distant point in the future we'll be able to drop the version
guard, as nobody will be running a version older than 10.34.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a use of pcre2_config(PCRE2_CONFIG_VERSION, ...) which I added
in 95ca1f987e (grep/pcre2: better support invalid UTF-8 haystacks,
2021-01-24) with the same test done at compile-time.
It might be cuter to do this at runtime since we don't have to do the
"major >= 11 || (major >= 10 && ...)" test. But in the next commit
we'll add another version comparison that absolutely needs to be done
at compile-time, so we're better of being consistent across the board.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update support for invalid UTF-8 in PCRE2.
* ab/grep-pcre-invalid-utf8:
grep/pcre2: better support invalid UTF-8 haystacks
grep/pcre2 tests: don't rely on invalid UTF-8 data test
The support for deprecated PCRE1 library has been dropped.
* ab/retire-pcre1:
Remove support for v1 of the PCRE library
config.mak.uname: remove redundant NO_LIBPCRE1_JIT flag
Remove the hidden "grep --debug" and "log --grep-debug" options added
in 17bf35a3c7 (grep: teach --debug option to dump the parse tree,
2012-09-13).
At the time these options seem to have been intended to go along with
a documentation discussion and to help the author of relevant tests to
perform ad-hoc debugging on them[1].
Reasons to want this gone:
1. They were never documented, and the only (rather trivial) use of
them in our own codebase for testing is something I removed back
in e01b4dab01 (grep: change non-ASCII -i test to stop using
--debug, 2017-05-20).
2. Googling around doesn't show any in-the-wild uses I could dig up,
and on the Git ML the only mentions after the original discussion
seem to have been when they came up in unrelated diff contexts, or
that test commit of mine.
3. An exception to that is c581e4a749 (grep: under --debug, show
whether PCRE JIT is enabled, 2019-08-18) where we added the
ability to dump out when PCREv2 has the JIT in effect.
The combination of that and my earlier b65abcafc7 (grep: use PCRE
v2 for optimized fixed-string search, 2019-07-01) means Git prints
this out in its most common in-the-wild configuration:
$ git log --grep-debug --grep=foo --grep=bar --grep=baz --all-match
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
[all-match]
(or
pattern_body<body>foo
(or
pattern_body<body>bar
pattern_body<body>baz
)
)
$ git grep --debug \( -e foo --and -e bar \) --or -e baz
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
(or
(and
patternfoo
patternbar
)
patternbaz
)
I.e. for each pattern we're considering for the and/or/--all-match
etc. debugging we'll now diligently spew out another identical line
saying whether the PCREv2 JIT is on or not.
I think that nobody's complained about that rather glaringly obviously
bad output says something about how much this is used, i.e. it's
not.
The need for this debugging aid for the composed grep/log patterns
seems to have passed, and the desire to dump the JIT config seems to
have been another one-off around the time we had JIT-related issues on
the PCREv2 codepath. That the original author of this debugging
facility seemingly hasn't noticed the bad output since then[2] is
probably some indicator.
1. https://lore.kernel.org/git/cover.1347615361.git.git@drmicha.warpmail.net/
2. https://lore.kernel.org/git/xmqqk1b8x0ac.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the support for invalid UTF-8 haystacks given a non-ASCII
needle when using the PCREv2 backend.
This is a more complete fix for a bug I started to fix in
870eea8166 (grep: do not enter PCRE2_UTF mode on fixed matching,
2019-07-26), now that PCREv2 has the PCRE2_MATCH_INVALID_UTF mode we
can make use of it.
This fixes the sort of case described in 8a5999838e (grep: stess test
PCRE v2 on invalid UTF-8 data, 2019-07-26), i.e.:
- The subject string is non-ASCII (e.g. "ævar")
- We're under a is_utf8_locale(), e.g. "en_US.UTF-8", not "C"
- We are using --ignore-case, or we're a non-fixed pattern
If those conditions were satisfied and we matched found non-valid
UTF-8 data PCREv2 might bark on it, in practice this only happened
under the JIT backend (turned on by default on most platforms).
Ultimately this fixes a "regression" in b65abcafc7 ("grep: use PCRE v2
for optimized fixed-string search", 2019-07-01), I'm putting that in
scare-quotes because before then we wouldn't properly support these
complex case-folding, locale etc. cases either, it just broke in
different ways.
There was a bug related to this the PCRE2_NO_START_OPTIMIZE flag fixed
in PCREv2 10.36. It can be worked around by setting the
PCRE2_NO_START_OPTIMIZE flag. Let's do that in those cases, and add
tests for the bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove support for using version 1 of the PCRE library. Its use has
been discouraged by upstream for a long time, and it's in a
bugfix-only state.
Anyone who was relying on v1 in particular got a nudge to move to v2
in e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11), which was first released as part of v2.18.0.
With this the LIBPCRE2 test prerequisites is redundant to PCRE. But
I'm keeping it for self-documentation purposes, and to avoid conflict
with other in-flight PCRE patches.
I'm also not changing all of our own "pcre2" names to "pcre", i.e. the
inverse of 6d4b5747f0 (grep: change internal *pcre* variable &
function names to be *pcre1*, 2017-05-25). I don't see the point, and
it makes the history/blame harder to read. Maybe if there's ever a
PCRE v3...
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 15fabd1bbd ("builtin/grep.c: make configuration callback more
reusable", 2012-10-09), we learned to fill a `static struct grep_opt
grep_defaults` which we can use as a blueprint for other such structs.
At the time, we didn't consider designated initializers to be widely
useable, but these days, we do. (See, e.g., cbc0f81d96 ("strbuf: use
designated initializers in STRBUF_INIT", 2017-07-10).)
Use designated initializers to let the compiler set up the struct and so
that we don't need to remember to call `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`init_grep_defaults()` fills a `static struct grep_opt grep_defaults`.
This struct is then used by `grep_init()` as a blueprint for other such
structs. Notably, `grep_init()` takes a `struct repo *` and assigns it
into the target struct.
As a result, it is unnecessary for us to take a `struct repo *` in
`init_grep_defaults()` as well. We assign it into the default struct and
never look at it again. And in light of how we return early if we have
already set up the default struct, it's not just unnecessary, but is
also a bit confusing: If we are called twice and with different repos,
is it a bug or a feature that we ignore the second repo?
Drop the repo parameter for `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-grep uses 'grep_read_mutex' to protect its calls to object reading
operations. But these have their own internal lock now, which ensures a
better performance (allowing parallel access to more regions). So, let's
remove the former and, instead, activate the latter with
enable_obj_read_lock().
Sections that are currently protected by 'grep_read_mutex' but are not
internally protected by the object reading lock should be surrounded by
obj_read_lock() and obj_read_unlock(). These guarantee mutual exclusion
with object reading operations, keeping the current behavior and
avoiding race conditions. Namely, these places are:
In grep.c:
- fill_textconv() at fill_textconv_grep().
- userdiff_get_textconv() at grep_source_1().
In builtin/grep.c:
- parse_object_or_die() and the submodule functions at
grep_submodule().
- deref_tag() and gitmodules_config_oid() at grep_objects().
If these functions become thread-safe, in the future, we might remove
the locking and probably get some speedup.
Note that some of the submodule functions will already be thread-safe
(or close to being thread-safe) with the internal object reading lock.
However, as some of them will require additional modifications to be
removed from the critical section, this will be done in its own patch.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leakfix.
* cb/pcre2-chartables-leakfix:
grep: avoid leak of chartables in PCRE2
grep: make PCRE2 aware of custom allocator
grep: make PCRE1 aware of custom allocator
94da9193a6 ("grep: add support for PCRE v2", 2017-06-01) introduced
a small memory leak visible with valgrind in t7813.
Complete the creation of a PCRE2 specific variable that was missing from
the original change and free the generated table just like it is done
for PCRE1.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
94da9193a6 (grep: add support for PCRE v2, 2017-06-01) didn't include
a way to override the system allocator, and so it is incompatible with
custom allocators (e.g. nedmalloc). This problem became obvious when we
tried to plug a memory leak by `free()`ing a data structure allocated by
PCRE2, triggering a segfault in Windows (where we use nedmalloc by
default).
PCRE2 requires the use of a general context to override the allocator
and therefore, there is a lot more code needed than in PCRE1, including
a couple of wrapper functions.
Extend the grep API with a "destructor" that could be called to cleanup
any objects that were created and used globally.
Update `builtin/grep.c` to use that new API, but any other future users
should make sure to have matching `grep_init()`/`grep_destroy()` calls
if they are using the pattern matching functionality.
Move some of the logic that was before done per thread (in the workers)
into an earlier phase to avoid degrading performance, but as the use of
PCRE2 with custom allocators is better understood it is expected more of
its functions will be instructed to use the custom allocator as well as
was done in the original code[1] this work was based on.
[1] https://public-inbox.org/git/3397e6797f872aedd18c6d795f4976e1c579514b.1565005867.git.gitgitgadget@gmail.com/
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few simplification and bugfixes to PCRE interface.
* ab/pcre-jit-fixes:
grep: under --debug, show whether PCRE JIT is enabled
grep: do not enter PCRE2_UTF mode on fixed matching
grep: stess test PCRE v2 on invalid UTF-8 data
grep: create a "is_fixed" member in "grep_pat"
grep: consistently use "p->fixed" in compile_regexp()
grep: stop using a custom JIT stack with PCRE v1
grep: stop "using" a custom JIT stack with PCRE v2
grep: remove overly paranoid BUG(...) code
grep: use PCRE v2 for optimized fixed-string search
grep: remove the kwset optimization
grep: drop support for \0 in --fixed-strings <pattern>
grep: make the behavior for NUL-byte in patterns sane
grep tests: move binary pattern tests into their own file
grep tests: move "grep binary" alongside the rest
grep: inline the return value of a function call used only once
t4210: skip more command-line encoding tests on MinGW
grep: don't use PCRE2?_UTF8 with "log --encoding=<non-utf8>"
log tests: test regex backends in "--encode=<enc>" tests
18547aacf5 ("grep/pcre: support utf-8", 2016-06-25) that was released
with git 2.10 added the PCRE_UTF8 flag to PCRE1 matching including a
call to has_non_ascii() to try to avoid breakage if there was non-utf8
encoded content in the haystack.
Usually PCRE is compiled with JIT support (even if is not the default),
and therefore the codepath used includes calling pcre_jit_exec, which
skips UTF-8 validation by design (which might result in crashes or hangs)
but when JIT support wasn't compiled we use pcre_exec instead with the
posibility that grep might be aborted if invalid UTF-8 is found in the
haystack.
PCRE1 provides a flag since Mar 5, 2007 that could be used to skip the
checks explicitly so use that to make both codepaths equivalent (the
flag is ignored by pcre1_jit_exec)
this fix is only implemented for PCRE1 because PCRE2 is likely to have
a better solution (without the risks) instead in the future
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code used both a macro and a variable to keep track if JIT
support was desired and relied on the fact that a non JIT
enabled library will ignore a request for JIT compilation
(as defined by the second parameter of the call to pcre_study)
Cleanup the multiple levels of macros used and call pcre_study
with the right parameter after JIT support has been confirmed
and unless it was requested to be disabled with NO_LIBPCRE1_JIT
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e87de7cab4 ("grep: un-break building with PCRE < 8.32", 2017-05-25)
added a restriction for JIT support that is no longer needed after
pcre_jit_exec() calls were removed.
Reorganize the definitions in grep.h so that JIT support could be
detected early and NO_LIBPCRE1_JIT could be used reliably to enforce
JIT doesn't get used.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change paves the way for later using this value the regex compile
functions themselves.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the PCRE v1 code for the same reasons as for the PCRE v2 code
in the last commit. Unlike with v2 we actually used the custom stack
in v1, but let's use PCRE's built-in 32 KB one instead, since
experience with v2 shows that's enough. Most distros are already using
v2 as a default, and the underlying sljit code is the same.
Unfortunately we can't just pass a NULL to pcre_jit_exec() as with
pcre2_jit_match(). Unlike the v2 function it doesn't support
that. Instead we need to use the fatter pcre_exec() if we'd like the
same behavior.
This will make things slightly slower than on the fast-path function,
but it's OK since we care less about v1 performance these days since
we have and recommend v2. Running a similar performance test as what I
ran in fbaceaac47 ("grep: add support for the PCRE v1 JIT API",
2017-05-25) via:
GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 USE_LIBPCRE1=Y CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst' ./run HEAD~ HEAD p7820-grep-engines.sh
Gives us this, just the /perl/ results:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.19(0.67+0.52) 0.19(0.65+0.52) +0.0%
7820.7: perl grep '^how to' 0.19(0.78+0.44) 0.19(0.72+0.49) +0.0%
7820.11: perl grep '[how] to' 0.39(2.13+0.43) 0.40(2.10+0.46) +2.6%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.44(2.55+0.37) 0.45(2.47+0.41) +2.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.23(1.06+0.42) 0.22(1.03+0.43) -4.3%
It will also implicitly re-enable UTF-8 validation for PCRE v1. As
noted in [1] we now have cases as a result where PCRE v1 is more eager
to error out. Subsequent patches will fix that for v2, and I think
it's fair to tell v1 users "just upgrade" and not worry about that
edge case for v1.
1. https://public-inbox.org/git/CAPUEsphZJ_Uv9o1-yDpjNLA_q-f7gWXz9g1gCY2pYAYN8ri40g@mail.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported in [1] the code I added in 94da9193a6 ("grep: add support
for PCRE v2", 2017-06-01) to use a custom JIT stack has never
worked. It was incorrectly copy/pasted from code I added in
fbaceaac47 ("grep: add support for the PCRE v1 JIT API", 2017-05-25),
which did work.
Thus our intention of starting with 1 byte of stack at a maximum of 1
MB didn't happen, we'd always use the 32 KB stack provided by PCRE
v2's jit_machine_stack_exec()[2]. The reason I allocated a custom
stack at all was this advice in pcrejit(3) (same in pcre2jit(3)):
"By default, it uses 32KiB on the machine stack. However, some
large or complicated patterns need more than this"
Since we've haven't had any reports of users running into
PCRE2_ERROR_JIT_STACKLIMIT in the wild I think we can safely assume
that we can just use the library defaults instead and drop this
code. This won't change with the wider use of PCRE v2 in
ed0479ce3d ("Merge branch 'ab/no-kwset' into next", 2019-07-15), a
fixed string search is not a "large or complicated pattern".
For good measure I ran the performance test noted in 94da9193a6,
although the command is simpler now due to my 0f50c8e32c ("Makefile:
remove the NO_R_TO_GCC_LINKER flag", 2019-05-17):
GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 USE_LIBPCRE2=Y CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst' ./run HEAD~ HEAD p7820-grep-engines.sh
Just the /perl/ results are:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.17(0.27+0.65) 0.17(0.24+0.68) +0.0%
7820.7: perl grep '^how to' 0.16(0.23+0.66) 0.16(0.23+0.67) +0.0%
7820.11: perl grep '[how] to' 0.18(0.35+0.62) 0.18(0.33+0.65) +0.0%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.17(0.45+0.54) 0.17(0.49+0.50) +0.0%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.16(0.33+0.58) 0.16(0.29+0.62) +0.0%
So, as expected there's no change, and running with valgrind reveals
that we have fewer allocations now.
As noted in [3] there are known regexes that will fail with the lower
stack limit, the way GNU grep fixed it is interesting, although I
believe the implementation is overly verbose, they could make PCRE v2
handle that gradual re-allocation, that's what min/max memory is
for.
So we might end up bringing this back, I'm more inclined to just kick
such cases upstairs to PCRE maintainers as a bug, perhaps they'll add
some overall "just allocate more then" flag to make this easier. In
any case there's no functional change here, we didn't have a custom
stack, so let's apply this first, we can always revert it later.
1. https://public-inbox.org/git/20190721194052.15440-1-carenas@gmail.com/
2. I didn't really intend to start with 1 byte, looking at the PCRE v2
code again what happened is that I cargo-culted some of PCRE v2's
own test code which was meant to test re-allocations. It's more
sane to start with say 32 KB with a max of 1 MB, as pcre2grep.c
does.
3. https://public-inbox.org/git/CAPUEspjj+fG8QDmf=bZXktfpLgkgiu34HTjKLhm-cmEE04FE-A@mail.gmail.com/
Reported-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug introduced in 18547aacf5 ("grep/pcre: support utf-8",
2016-06-25) that was missed due to a blindspot in our tests, as
discussed in the previous commit. I then blindly copied the same bug
in 94da9193a6 ("grep: add support for PCRE v2", 2017-06-01) when
adding the PCRE v2 code.
We should not tell PCRE that we're processing UTF-8 just because we're
dealing with non-ASCII. In the case of e.g. "log --encoding=<...>"
under is_utf8_locale() the haystack might be in ISO-8859-1, and the
needle might be in a non-UTF-8 encoding.
Maybe we should be more strict here and die earlier? Should we also be
converting the needle to the encoding in question, and failing if it's
not a string that's valid in that encoding? Maybe.
But for now matching this as non-UTF8 at least has some hope of
producing sensible results, since we know that our default heuristic
of assuming the text to be matched is in the user locale encoding
isn't true when we've explicitly encoded it to be in a different
encoding.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a faithful conversion without attempting to improve
anything. That comes later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: squashed in missing forward decl in userdiff.h found by Ramsay]
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" learned the "--column" option that gives not just the
line number but the column number of the hit.
* tb/grep-column:
contrib/git-jump/git-jump: jump to exact location
grep.c: add configuration variables to show matched option
builtin/grep.c: add '--column' option to 'git-grep(1)'
grep.c: display column number of first match
grep.[ch]: extend grep_opt to allow showing matched column
grep.c: expose {,inverted} match column in match_line()
Documentation/config.txt: camel-case lineNumber for consistency
Teach 'git grep --only-matching', a new option to only print the
matching part(s) of a line.
For instance, a line containing the following (taken from README.md:27):
(`man gitcvs-migration` or `git help cvs-migration` if git is
Is printed as follows:
$ git grep --line-number --column --only-matching -e git -- \
README.md | grep ":27"
README.md:27:7:git
README.md:27:16:git
README.md:27:38:git
The patch works mostly as one would expect, with the exception of a few
considerations that are worth mentioning here.
Like GNU grep, this patch ignores --only-matching when --invert (-v) is
given. There is a sensible answer here, but parity with the behavior of
other tools is preferred.
Because a line might contain more than one match, there are special
considerations pertaining to when to print line headers, newlines, and
how to increment the match column offset. The line header and newlines
are handled as a special case within the main loop to avoid polluting
the surrounding code with conditionals that have large blocks.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To support showing the matched column when calling 'git-grep(1)', teach
'grep_opt' the normal set of options to configure the default behavior
and colorization of this feature.
Now that we have opt->columnnum, use it to disable short-circuiting over
ORs and ANDs so that col and icol are always filled with the earliest
matches on each line. In addition, don't return the first match from
match_line(), for the same reason.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is more inline with how we handle color slots in other code. It
also allows us to get the list of configurable color slots later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a pcre1 library which is compiled with JIT enabled then
PCRE_STUDY_JIT_COMPILE will be defined whether or not the
NO_LIBPCRE1_JIT configuration is set.
This means that we enable JIT functionality when calling pcre_study
even if NO_LIBPCRE1_JIT has been explicitly set and we just use plain
pcre_exec later.
Fix this by using own macro (GIT_PCRE_STUDY_JIT_COMPILE) which we set to
PCRE_STUDY_JIT_COMPILE only if NO_LIBPCRE1_JIT is not set and define to
0 otherwise, as before.
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert grep to use 'struct repository' which enables recursing into
submodules to be handled in-process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor calls to the grep machinery to always pass opt.ignore_case &
opt.extended_regexp_option instead of setting the equivalent regflags
bits.
The bug fixed when making -i work with -P in commit 9e3cbc59d5 ("log:
make --regexp-ignore-case work with --perl-regexp", 2017-05-20) was
really just plastering over the code smell which this change fixes.
The reason for adding the extensive commentary here is that I
discovered some subtle complexity in implementing this that really
should be called out explicitly to future readers.
Before this change we'd rely on the difference between
`extended_regexp_option` and `regflags` to serve as a membrane between
our preliminary parsing of grep.extendedRegexp and grep.patternType,
and what we decided to do internally.
Now that those two are the same thing, it's necessary to unset
`extended_regexp_option` just before we commit in cases where both of
those config variables are set. See 84befcd0a4 ("grep: add a
grep.patternType configuration setting", 2012-08-03) for the code and
documentation related to that.
The explanation of why the if/else branches in
grep_commit_pattern_type() are ordered the way they are exists in that
commit message, but I think it's worth calling this subtlety out
explicitly with a comment for future readers.
Even though grep_commit_pattern_type() is the only caller of
grep_set_pattern_type_option() it's simpler to reset the
extended_regexp_option flag in the latter, since 2/3 branches in the
former would otherwise need to reset it, this way we can do it in one
place.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the remaining parts of grep to use struct object_id.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for v2 of the PCRE API. This is a new major version of
PCRE that came out in early 2015[1].
The regular expression syntax is the same, but while the API is
similar, pretty much every function is either renamed or takes
different arguments. Thus using it via entirely new functions makes
sense, as opposed to trying to e.g. have one compile_pcre_pattern()
that would call either PCRE v1 or v2 functions.
Git can now be compiled with either USE_LIBPCRE1=YesPlease or
USE_LIBPCRE2=YesPlease, with USE_LIBPCRE=YesPlease currently being a
synonym for the former. Providing both is a compile-time error.
With earlier patches to enable JIT for PCRE v1 the performance of the
release versions of both libraries is almost exactly the same, with
PCRE v2 being around 1% slower.
However after I reported this to the pcre-dev mailing list[2] I got a
lot of help with the API use from Zoltán Herczeg, he subsequently
optimized some of the JIT functionality in v2 of the library.
Running the p7820-grep-engines.sh performance test against the latest
Subversion trunk of both, with both them and git compiled as -O3, and
the test run against linux.git, gives the following results. Just the
/perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_COMMAND='grep -q LIBPCRE2 Makefile && make -j8 USE_LIBPCRE2=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre2/inst/lib || make -j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~5 HEAD~ HEAD p7820-grep-engines.sh
[...]
Test HEAD~5 HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.31(1.10+0.48) 0.21(0.35+0.56) -32.3% 0.21(0.34+0.55) -32.3%
7820.7: perl grep '^how to' 0.56(2.70+0.40) 0.24(0.64+0.52) -57.1% 0.20(0.28+0.60) -64.3%
7820.11: perl grep '[how] to' 0.56(2.66+0.38) 0.29(0.95+0.45) -48.2% 0.23(0.45+0.54) -58.9%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.02(5.77+0.42) 0.31(1.02+0.54) -69.6% 0.23(0.50+0.54) -77.5%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.38(1.57+0.42) 0.27(0.85+0.46) -28.9% 0.21(0.33+0.57) -44.7%
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Here HEAD~2 is git with PCRE v1 without JIT, HEAD~ is PCRE v1 with
JIT, and HEAD is PCRE v2 (also with JIT). See previous commits of mine
mentioning p7820-grep-engines.sh for more details on the test setup.
For ease of readability, a different run just of HEAD~ (PCRE v1 with
JIT v.s. PCRE v2), again with just the /perl/ tests shown:
[...]
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.21(0.42+0.52) 0.21(0.31+0.58) +0.0%
7820.7: perl grep '^how to' 0.25(0.65+0.50) 0.20(0.31+0.57) -20.0%
7820.11: perl grep '[how] to' 0.30(0.90+0.50) 0.23(0.46+0.53) -23.3%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.30(1.19+0.38) 0.23(0.51+0.51) -23.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.27(0.84+0.48) 0.21(0.34+0.57) -22.2%
I.e. the two are either neck-to-neck, but PCRE v2 usually pulls ahead,
when it does it's around 20% faster.
A brief note on thread safety: As noted in pcre2api(3) & pcre2jit(3)
the compiled pattern can be shared between threads, but not some of
the JIT context, however the grep threading support does all pattern &
JIT compilation in separate threads, so this code doesn't need to
concern itself with thread safety.
See commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) for the
initial addition of PCRE v1. This change follows some of the same
patterns it did (and which were discussed on list at the time),
e.g. mocking up types with typedef instead of ifdef-ing them out when
USE_LIBPCRE2 isn't defined. This adds some trivial memory use to the
program, but makes the code look nicer.
1. https://lists.exim.org/lurker/message/20150105.162835.0666407a.en.html
2. https://lists.exim.org/lurker/thread/20170419.172322.833ee099.en.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
