The default merge message prepared by "git merge" records the name
of the current branch; the name can be overridden with a new option
to allow users to pretend a merge is made on a different branch.
* jc/merge-detached-head-name:
merge: allow to pretend a merge is made into a different branch
Correctness and performance update to "diff --color-moved" feature.
* pw/diff-color-moved-fix:
diff --color-moved: intern strings
diff: use designated initializers for emitted_diff_symbol
diff --color-moved-ws=allow-indentation-change: improve hash lookups
diff --color-moved: stop clearing potential moved blocks
diff --color-moved: shrink potential moved blocks as we go
diff --color-moved: unify moved block growth functions
diff --color-moved: call comparison function directly
diff --color-moved-ws=allow-indentation-change: simplify and optimize
diff: simplify allow-indentation-change delta calculation
diff --color-moved: avoid false short line matches and bad zebra coloring
diff --color-moved=zebra: fix alternate coloring
diff --color-moved: rewind when discarding pmb
diff --color-moved: factor out function
diff --color-moved: clear all flags on blocks that are too short
diff --color-moved: add perf tests
"git am" learns "--empty=(stop|drop|keep)" option to tweak what is
done to a piece of e-mail without a patch in it.
* xw/am-empty:
am: support --allow-empty to record specific empty patches
am: support --empty=<option> to handle empty patches
doc: git-format-patch: describe the option --always
Many git commands that deal with working tree files try to remove a
directory that becomes empty (i.e. "git switch" from a branch that
has the directory to another branch that does not would attempt
remove all files in the directory and the directory itself). This
drops users into an unfamiliar situation if the command was run in
a subdirectory that becomes subject to removal due to the command.
The commands have been taught to keep an empty directory if it is
the directory they were started in to avoid surprising users.
* en/keep-cwd:
t2501: simplify the tests since we can now assume desired behavior
dir: new flag to remove_dir_recurse() to spare the original_cwd
dir: avoid incidentally removing the original_cwd in remove_path()
stash: do not attempt to remove startup_info->original_cwd
rebase: do not attempt to remove startup_info->original_cwd
clean: do not attempt to remove startup_info->original_cwd
symlinks: do not include startup_info->original_cwd in dir removal
unpack-trees: add special cwd handling
unpack-trees: refuse to remove startup_info->original_cwd
setup: introduce startup_info->original_cwd
t2501: add various tests for removing the current working directory
The RCS keyword substitution in "git p4" used to be done assuming
that the contents are UTF-8 text, which can trigger decoding
errors. We now treat the contents as a bytestring for robustness
and correctness.
* jh/p4-rcs-expansion-in-bytestring:
git-p4: resolve RCS keywords in bytes not utf-8
git-p4: open temporary patch file for write only
git-p4: add raw option to read_pipelines
git-p4: pre-compile RCS keyword regexes
git-p4: use with statements to close files after use in patchRCSKeywords
Even if some of these messages are not subject to gettext i18n, this
helps bring a single style of message for a given error type.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are all replaced by "the option '%s' requires '%s'", which is a
new string but replaces 17 previous unique strings.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use placeholders for constant tokens. The strings are turned into
"cannot be used together"
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use static strings for constant parts of the sentences. They are all
turned into "cannot be used together".
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit bee8691f19 ("stash: restore untracked files AFTER restoring
tracked files", 2021-09-10), we correctly identified that we should
restore changes to tracked files before attempting to restore untracked
files, and accordingly moved the code for restoring untracked files a
few lines down in do_apply_stash(). Unfortunately, the intervening
lines had some early return statements meaning that we suddenly stopped
restoring untracked files in some cases.
Even before the previous commit, there was another possible issue with
the current code -- a post-stash-apply 'git status' that was intended
to be run after restoring the stash was skipped when we hit a conflict
(or other error condition), which seems slightly inconsistent.
Fix both issues by saving the return status, and letting other
functionality run before returning.
Reported-by: AJ Henderson
Test-case-by: Randall S. Becker <randall.becker@nexbridge.ca>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "init" and "set" subcommands in "git sparse-checkout" have been
unified for a better user experience and performance.
* en/sparse-checkout-set:
sparse-checkout: remove stray trailing space
clone: avoid using deprecated `sparse-checkout init`
Documentation: clarify/correct a few sparsity related statements
git-sparse-checkout.txt: update to document init/set/reapply changes
sparse-checkout: enable reapply to take --[no-]{cone,sparse-index}
sparse-checkout: enable `set` to initialize sparse-checkout mode
sparse-checkout: split out code for tweaking settings config
sparse-checkout: disallow --no-stdin as an argument to set
sparse-checkout: add sanity-checks on initial sparsity state
sparse-checkout: break apart functions for sparse_checkout_(set|add)
sparse-checkout: pass use_stdin as a parameter instead of as a global
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
When in cone mode sparse-checkout, it is unclear how 'git
sparse-checkout add <dir1> ...' should behave if the existing
sparse-checkout file does not match the cone mode patterns. Change the
behavior to fail with an error message about the existing patterns.
Also, all cone mode patterns start with a '/' character, so add that
restriction. This is necessary for our example test 'cone mode: warn on
bad pattern', but also requires modifying the example sparse-checkout
file we use to test the warnings related to recognizing cone mode
patterns.
This error checking would cause a failure further down the test script
because of a test that adds non-cone mode patterns without cleaning them
up. Perform that cleanup as part of the test now.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to t1091-sparse-checkout-builtin.sh that would result in an
infinite loop and out-of-memory error before this change. The issue
relies on having non-cone-mode patterns while trying to modify the
patterns in cone-mode.
The fix is simple, allowing us to break from the loop when the input
path does not contain a slash, as the "dir" pattern we added does not.
This is only a fix to the critical out-of-memory error. A better
response to such a strange state will follow in a later change.
Reported-by: Calbabreaker <calbabreaker@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Then core.sparseCheckoutCone is enabled, the sparse-checkout patterns are
used to populate two hashsets that accelerate pattern matching. If the user
modifies the sparse-checkout file outside of the 'sparse-checkout' builtin,
then strange patterns can happen, triggering some error checks.
One of these error checks is possible to hit when some special characters
exist in a line. A warning message is correctly written to stderr, but then
there is additional logic that attempts to remove the line from the hashset
and free the data. This leads to a segfault in the 'git sparse-checkout
list' command because it iterates over the contents of the hashset, which is
now invalid.
The fix here is to stop trying to remove from the hashset. In addition,
we disable cone mode sparse-checkout because of the malformed data. This
results in the pattern-matching working with a possibly-slower
algorithm, but using the patterns as they are in the sparse-checkout
file.
This also changes the behavior of commands such as 'git sparse-checkout
list' because the output patterns will be the contents of the
sparse-checkout file instead of the list of directories. This is an
existing behavior for other types of bad patterns.
Add a test that triggers the segfault without the code change.
Reported-by: John Burnett <johnburnett@johnburnett.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the cat_one_file() logic that calls get_oid_with_context()
under --textconv and --filters to use the GET_OID_ONLY_TO_DIE flag,
thus improving the error messaging emitted when e.g. <path> is missing
but <rev> is not.
To service the "cat-file" use-case we need to introduce a new
"GET_OID_REQUIRE_PATH" flag, otherwise it would exit early as soon as
a valid "HEAD" was resolved, but in the "cat-file" case being changed
we always need a valid revision and path.
This arguably makes the "<bad rev>:<bad path>" and "<bad
rev>:<good (in HEAD) path>" use cases worse, as we won't quote the
<path> component at the user anymore, but let's just use the existing
logic "git log" et al use for now. We can improve the messaging for
those cases as a follow-up for all callers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the migration of --batch-all-objects to OPT_CMDMODE() in the
preceding commit one bug with combining it and other OPT_CMDMODE()
options was solved, but we were still left with e.g. --buffer silently
being discarded when not in batch mode.
Fix all those bugs, and in addition emit errors telling the user
specifically what options can't be combined with what other options,
before this we'd usually just emit the cryptic usage text and leave
the users to work it out by themselves.
This change is rather large, because to do so we need to untangle the
options processing so that we can not only error out, but emit
sensible errors, and e.g. emit errors about options before errors
about stray argc elements (as they might become valid if the option
were removed).
Some of the output changes ("error:" to "fatal:" with
usage_msg_opt[f]()), but none of the exit codes change, except in
those cases where we silently accepted bad option combinations before,
now we'll error out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage of OPT_CMDMODE() in "cat-file"[1] was added in parallel with
the development of[3] the --batch-all-objects option[4], so we've
since grown[5] checks that it can't be combined with other command
modes, when it should just be made a top-level command-mode
instead. It doesn't combine with --filters, --textconv etc.
By giving parse_options() information about what options are mutually
exclusive with one another we can get the die() message being removed
here for free, we didn't even use that removed message in some cases,
e.g. for both of:
--batch-all-objects --textconv
--batch-all-objects --filters
We'd take the "goto usage" in the "if (opt)" branch, and never reach
the previous message. Now we'll emit e.g.:
$ git cat-file --batch-all-objects --filters
error: option `filters' is incompatible with --batch-all-objects
1. b48158ac94 (cat-file: make the options mutually exclusive, 2015-05-03)
2. https://lore.kernel.org/git/xmqqtwspgusf.fsf@gitster.dls.corp.google.com/
3. https://lore.kernel.org/git/20150622104559.GG14475@peff.net/
4. 6a951937ae (cat-file: add --batch-all-objects option, 2015-06-22)
5. 321459439e (cat-file: support --textconv/--filters in batch mode, 2016-09-09)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for the output that's emitted when we disambiguate
<obj>:<path> in cat-file. This gives us a baseline for improving these
messages.
For e.g. "git blame" we'll emit:
$ git blame HEAD:foo
fatal: no such path 'HEAD:foo' in HEAD
But cat-file doesn't disambiguate these two cases, and just gives the
rather unhelpful:
$ git cat-file --textconv HEAD:foo
fatal: Not a valid object name HEAD:foo
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stress test the usage emitted when options are combined in ways that
isn't supported. Let's test various option combinations, some of these
we buggily allow right now.
E.g. this reveals a bug in 321459439e (cat-file: support
--textconv/--filters in batch mode, 2016-09-09) that we'll fix in a
subsequent commit. We're supposed to be emitting a relevant message
when --batch-all-objects is combined with --textconv or --filters, but
we don't.
The cases of needing to assign to opt=2 in the "opt" loop are because
on those we do the right thing already, in subsequent commits the
"test_expect_failure" cases will be fixed, and the for-loops unified.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since commit a492d5331c ("merge-ort: ensure we consult df_conflict
and path_conflicts", 2021-06-30), when renormalization is active AND a
file is involved in a rename/delete conflict BUT the file is unmodified
(either before or after renormalization), merge-ort was running into an
assertion failure. Prior to that commit (or if assertions were compiled
out), merge-ort would mis-merge instead, ignoring the rename/delete
conflict and just deleting the file.
Remove the assertions, fix the code appropriately, leave some good
comments in the code, and add a testcase for this situation.
Reported-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment variable $SHELL is usually set to the user's
interactive shell. Our build and test scripts never use $SHELL because
there are no guarantees about its input language. Instead, we use
/bin/sh which should be a POSIX shell.
For systems with a broken /bin/sh, we allow to override that path via
SHELL_PATH. To run tests in yet another shell we allow to override
SHELL_PATH with TEST_SHELL_PATH.
Perf tests run in $SHELL via a wrapper defined in t/perf/perf-lib.sh,
so they break with e.g. SHELL=python. Use TEST_SHELL_PATH like
in other tests. TEST_SHELL_PATH is always defined because
t/perf/perf-lib.sh includes t/test-lib.sh, which includes
GIT-BUILD-OPTIONS.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The chainlint test script linter in the test suite has been updated.
* es/chainlint:
chainlint.sed: stop splitting "(..." into separate lines "(" and "..."
chainlint.sed: swallow comments consistently
chainlint.sed: stop throwing away here-doc tags
chainlint.sed: don't mistake `<< word` in string as here-doc operator
chainlint.sed: make here-doc "<<-" operator recognition more POSIX-like
chainlint.sed: drop subshell-closing ">" annotation
chainlint.sed: drop unnecessary distinction between ?!AMP?! and ?!SEMI?!
chainlint.sed: tolerate harmless ";" at end of last line in block
chainlint.sed: improve ?!SEMI?! placement accuracy
chainlint.sed: improve ?!AMP?! placement accuracy
t/Makefile: optimize chainlint self-test
t/chainlint/one-liner: avoid overly intimate chainlint.sed knowledge
t/chainlint/*.test: generalize self-test commentary
t/chainlint/*.test: fix invalid test cases due to mixing quote types
t/chainlint/*.test: don't use invalid shell syntax
"git apply" has been taught to ignore a message without a patch
with the "--allow-empty" option. It also learned to honor the
"--quiet" option given from the command line.
* jz/apply-quiet-and-allow-empty:
git-apply: add --allow-empty flag
git-apply: add --quiet flag
"git fetch --set-upstream" did not check if there is a current
branch, leading to a segfault when it is run on a detached HEAD,
which has been corrected.
* ab/fetch-set-upstream-while-detached:
pull, fetch: fix segfault in --set-upstream option
Reftable intentionally keeps reflog data for deleted refs.
This breaks tests that delete and recreate "refs/tags/tag_with_reflog" as traces
of the deletion are left in reflog. To resolve this, use a differently named ref
for each test case.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dumb HTTP protocol exposes ref storage details as part of the protocol,
so it only works with the FILES refstorage backend
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dumb HTTP protocol exposes ref storage details as part of the protocol,
so it only works with the FILES refstorage backend
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit effectively reverts 2782db3 (test-tool: don't force full
index, 2021-03-30) and e2df6c3 (test-read-cache: print cache entries
with --table, 2021-03-30) to remove the --table and --expand options
from 'test-tool read-cache'. The previous changes already removed these
options from the test suite in favor of 'git ls-files --sparse'.
The initial thought of creating these options was to allow for tests to
see additional information with every cache entry. In particular, the
object type is still not mirrored in 'git ls-files'. Since sparse
directory entries always end with a slash, the object type is not
critical to verify the sparse index is enabled. It was thought that it
would be helpful to have additional information, such as flags, but that
was not needed for the FS Monitor integration and hasn't been needed
since.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that 'git ls-files --sparse' exists, we can use it to verify the
state of a sparse index instead of 'test-tool read-cache table'. Replace
these usages within t1091-sparse-checkout-builtin.sh and
t3705-add-sparse-checkout.sh.
The important changes are due to the different output format. In t3705,
we need to use the '--stage' output to get a file mode and OID, but
it also includes a stage value and drops the object type. This leads
to some differences in how we handle looking for specific entries.
In t1091, the test focuses on enabling the sparse index, so we do not
need the --stage flag to demonstrate how the index changes, and instead
can use a diff.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that 'git ls-files --sparse' exists, we can use it to verify the
state of a sparse index instead of 'test-tool read-cache table'. Replace
these usages within t1092-sparse-checkout-compatibility.sh.
The important changes are due to the different output format. We need to
use the '--stage' output to get a file mode and OID, but it also
includes a stage value and drops the object type. This leads to some
differences in how we handle looking for specific entries.
Some places where we previously looked for no 'tree' entries, we can
instead directly compare the output across the repository with a sparse
index and the one without.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Existing callers to 'git ls-files' are expecting file names, not
directories. It is best to expand a sparse index to show all of the
contained files in this case.
However, expert users may want to inspect the contents of the index
itself including which directories are sparse. Add a --sparse option to
allow users to request this information.
During testing, I noticed that options such as --modified did not affect
the output when the files in question were outside the sparse-checkout
definition. Tests are added to document this preexisting behavior and
how it remains unchanged with the sparse index and the --sparse option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git fetch' and 'git pull' commands parse the index in order to
determine if submodules exist. Without command_requires_full_index=0,
this will expand a sparse index, causing slow performance even when
there is no new data to fetch.
The .gitmodules file will never be inside a sparse directory entry, and
even if it was, the index_name_pos() method would expand the sparse
index if needed as we search for the path by name. These commands do not
iterate over the index, which is the typical thing we are careful about
when integrating with the sparse index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides a better error message in case SHA256 was inadvertently switched
on through the environment.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach diff and blame to work well with sparse index.
* ld/sparse-diff-blame:
blame: enable and test the sparse index
diff: enable and test the sparse index
diff: replace --staged with --cached in t1092 tests
repo-settings: prepare_repo_settings only in git repos
test-read-cache: set up repo after git directory
commit-graph: return if there is no git directory
git: ensure correct git directory setup with -h
"git fetch" without the "--update-head-ok" option ought to protect
a checked out branch from getting updated, to prevent the working
tree that checks it out to go out of sync. The code was written
before the use of "git worktree" got widespread, and only checked
the branch that was checked out in the current worktree, which has
been updated.
(originally called ak/fetch-not-overwrite-any-current-branch)
* ak/protect-any-current-branch:
branch: protect branches checked out in all worktrees
receive-pack: protect current branch for bare repository worktree
receive-pack: clean dead code from update_worktree()
fetch: protect branches checked out in all worktrees
worktree: simplify find_shared_symref() memory ownership model
branch: lowercase error messages
receive-pack: lowercase error messages
fetch: lowercase error messages
The cryptographic signing using ssh keys can specify literal keys
for keytypes whose name do not begin with the "ssh-" prefix by
using the "key::" prefix mechanism (e.g. "key::ecdsa-sha2-nistp256").
* fs/ssh-signing-other-keytypes:
ssh signing: make sign/amend test more resilient
ssh signing: support non ssh-* keytypes
Extend the signing of objects with SSH keys and learn to pay
attention to the key validity time range when verifying.
* fs/ssh-signing-key-lifetime:
ssh signing: verify ssh-keygen in test prereq
ssh signing: make fmt-merge-msg consider key lifetime
ssh signing: make verify-tag consider key lifetime
ssh signing: make git log verify key lifetime
ssh signing: make verify-commit consider key lifetime
ssh signing: add key lifetime test prereqs
ssh signing: use sigc struct to pass payload
t/fmt-merge-msg: make gpgssh tests more specific
t/fmt-merge-msg: do not redirect stderr
When "git log" implicitly enabled the "decoration" processing
without being explicitly asked with "--decorate" option, it failed
to read and honor the settings given by the "--decorate-refs"
option.
* jk/log-decorate-opts-with-implicit-decorate:
log: load decorations with --simplify-by-decoration
log: handle --decorate-refs with userformat "%d"
"git rebase -x" by mistake started exporting the GIT_DIR and
GIT_WORK_TREE environment variables when the command was rewritten
in C, which has been corrected.
* en/rebase-x-wo-git-dir-env:
sequencer: do not export GIT_DIR and GIT_WORK_TREE for 'exec'
The revision traversal machinery typically processes and returns all
children before any parent. fast-export needs to operate in the
reverse fashion, handling parents before any of their children in
order to build up the history starting from the root commit(s). This
would be a clear case where we could just use the revision traversal
machinery's "reverse" option to achieve this desired affect.
However, this wasn't what the code did. It added its own array for
queuing. The obvious hand-rolled solution would be to just push all
the commits into the array and then traverse afterwards, but it didn't
quite do that either. It instead attempted to process anything it
could as soon as it could, and once it could, check whether it could
process anything that had been queued. As far as I can tell, this was
an effort to save a little memory in the case of multiple root commits
since it could process some commits before queueing all of them. This
involved some helper functions named has_unshown_parent() and
handle_tail(). For typical invocations of fast-export, this
alternative essentially amounted to a hand-rolled method of reversing
the commits -- it was a bunch of work to duplicate the revision
traversal machinery's "reverse" option.
This hand-rolled reversing mechanism is actually somewhat difficult to
reason about. It takes some time to figure out how it ensures in
normal cases that it will actually process all traversed commits
(rather than just dropping some and not printing anything for them).
And it turns out there are some cases where the code does drop commits
without handling them, and not even printing an error or warning for
the user. Due to the has_unshown_parent() checks, some commits could
be left in the array at the end of the "while...get_revision()" loop
which would be unprocessed. This could be triggered for example with
git fast-export main -- --first-parent
or non-sensical traversal rules such as
git fast-export main -- --grep=Merge --invert-grep
While most traversals that don't include all parents should likely
trigger errors in fast-export (or at least require being used in
combination with --reference-excluded-parents), the --first-parent
traversal is at least reasonable and it'd be nice if it didn't just drop
commits. It'd also be nice for future readers of the code to have a
simpler "reverse traversal" mechanism. Use the "reverse" option of the
revision traversal machinery to achieve both.
Even for the non-sensical traversal flags like the --grep one above,
this would be an improvement. For example, in that case, the code
previously would have silently truncated history to only those commits
that do not have an ancestor containing "Merge" in their commit message.
After this code change, that case would include all commits without
"Merge" in their commit message -- but any commit that previously had a
"Merge"-mentioning parent would lose that parent
(likely resulting in many new root commits). While the new behavior is
still odd, it is at least understandable given that
--reference-excluded-parents is not the default.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: William Sprent <williams@unity3d.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful when creating a new branch to use the existing
tracking configuration from the branch point. However, there is
currently not a method to automatically do so.
Teach git-{branch,checkout,switch} an "inherit" argument to the
"--track" option. When this is set, creating a new branch will cause the
tracking configuration to default to the configuration of the branch
point, if set.
For example, if branch "main" tracks "origin/main", and we run
`git checkout --track=inherit -b feature main`, then branch "feature"
will track "origin/main". Thus, `git status` will show us how far
ahead/behind we are from origin, and `git pull` will pull from origin.
This is particularly useful when creating branches across many
submodules, such as with `git submodule foreach ...` (or if running with
a patch such as [1], which we use at $job), as it avoids having to
manually set tracking info for each submodule.
Since we've added an argument to "--track", also add "--track=direct" as
another way to explicitly get the original "--track" behavior ("--track"
without an argument still works as well).
Finally, teach branch.autoSetupMerge a new "inherit" option. When this
is set, "--track=inherit" becomes the default behavior.
[1]: https://lore.kernel.org/git/20180927221603.148025-1-sbeller@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new static variant of install_branch_config() that accepts
multiple remote branch names for tracking. This will be used in an
upcoming commit that enables inheriting the tracking configuration from
a parent branch.
Currently, all callers of install_branch_config() pass only a single
remote. Make install_branch_config() a small wrapper around
install_branch_config_multiple_remotes() so that existing callers do not
need to be changed.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a series of patches for a topic-B depends on having topic-A,
the workflow to prepare the topic-B branch would look like this:
$ git checkout -b topic-B main
$ git merge --no-ff --no-edit topic-A
$ git am <mbox-for-topic-B
When topic-A gets updated, recreating the first merge and rebasing
the rest of the topic-B, all on detached HEAD, is a useful
technique. After updating topic-A with its new round of patches:
$ git checkout topic-B
$ prev=$(git rev-parse 'HEAD^{/^Merge branch .topic-A. into}')
$ git checkout --detach $prev^1
$ git merge --no-ff --no-edit topic-A
$ git rebase --onto HEAD $prev @{-1}^0
$ git checkout -B @{-1}
This will
(0) check out the current topic-B.
(1) find the previous merge of topic-A into topic-B.
(2) detach the HEAD to the parent of the previous merge.
(3) merge the updated topic-A to it.
(4) reapply the patches to rebuild the rest of topic-B.
(5) update topic-B with the result.
without contaminating the reflog of topic-B too much. topic-B@{1}
is the "logically previous" state before topic-A got updated, for
example. At (4), comparison (e.g. range-diff) between HEAD and
@{-1} is a meaningful way to sanity check the result, and the same
can be done at (5) by comparing topic-B and topic-B@{1}.
But there is one glitch. The merge into the detached HEAD done in
the step (3) above gives us "Merge branch 'topic-A' into HEAD", and
does not say "into topic-B".
Teach the "--into-name=<branch>" option to "git merge" and its
underlying "git fmt-merge-message", to pretend as if we were merging
into <branch>, no matter what branch we are actually merging into,
when they prepare the merge message. The pretend name honors the
usual "into <target>" suppression mechanism, which can be seen in
the tests added here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
compile_pcre2_pattern() currently uses the option PCRE2_UTF only for
patterns with non-ASCII characters. Patterns with ASCII wildcards can
match non-ASCII strings, though. Without that option PCRE2 mishandles
UTF-8 input, though -- it matches parts of multi-byte characters. Fix
that by using PCRE2_UTF even for ASCII-only patterns.
This is a remake of the reverted ae39ba431a (grep/pcre2: fix an edge
case concerning ascii patterns and UTF-8 data, 2021-10-15). The change
to the condition and the test are simplified and more targeted.
Original-patch-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain invocations of "git apply --3way" will attempt threeway and
fail due to missing objects, even though git is able to fall back on
apply_fragments and apply the patch successfully with a return value
of 0. To fix, return early from try_threeway() in the following
cases:
- When the patch is a rename and no lines have changed. In this
case, "git diff" doesn't record the blob info, so 3way is neither
possible nor necessary.
- When the patch is an addition and there is no add/add conflict,
i.e. direct_to_threeway is false. In this case, threeway will
fail since the preimage is not in cache, but isn't necessary
anyway since there is no conflict.
This fixes a few unecessary error messages when applying these kinds
of patches with --3way.
It also fixes a reported issue where applying a concatenation of
several git produced patches will fail when those patches involve a
deletion followed by creation of the same file. Add a test for this
case too. (test provided by <i@zenithal.me>)
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While testing some ideas in 'git repack', I ran it with '--quiet' and
discovered that some progress output was still shown. Specifically, the
output for writing the multi-pack-index showed the progress.
The 'show_progress' variable in cmd_repack() is initialized with
isatty(2) and is not modified at all by the '--quiet' flag. The
'--quiet' flag modifies the po_args.quiet option which is translated
into a '--quiet' flag for the 'git pack-objects' child process. However,
'show_progress' is used to directly send progress information to the
multi-pack-index writing logic which does not use a child process.
The fix here is to modify 'show_progress' to be false if po_opts.quiet
is true, and isatty(2) otherwise. This new expectation simplifies a
later condition that checks both.
Update the documentation to make it clear that '-q' will disable all
progress in addition to ensuring the 'git pack-objects' child process
will receive the flag.
Use 'test_terminal' to check that this works to get around the isatty(2)
check.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, we needed a single packfile in order to have reachability
bitmaps. This introduced logic that when 'git repack' had a '-b' option
that we should stop sending the '--honor-pack-keep' option to the 'git
pack-objects' child process, ensuring that we create a packfile
containing all reachable objects.
In the world of multi-pack-index bitmaps, we no longer need to repack
all objects into a single pack to have valid bitmaps. Thus, we should
continue sending the '--honor-pack-keep' flag to 'git pack-objects'.
The fix is very simple: only disable the flag when writing bitmaps but
also _not_ writing the multi-pack-index.
This opens the door to new repacking strategies that might want to keep
some historical set of objects in a stable pack-file while only
repacking more recent objects.
To test, create a new 'test_subcommand_inexact' helper that is more
flexible than 'test_subcommand'. This allows us to look for the
--honor-pack-keep flag without over-indexing on the exact set of
arguments.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Actually use extended regexes as indicated in the comment.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --invert-grep is documented to filter out commits whose
messages match the --grep filters. However, it also affects the
header matches (--author, --committer), which is not intended.
Move the handling of that option to grep.c, as only the code there can
distinguish between matches in the header from those in the message
body. If --invert-grep is given then enable extended expressions (not
the regex type, we just need git grep's --not to work), negate the body
patterns and check if any of them match by piggy-backing on the
collect_hits mechanism of grep_source_1().
Collecting the matches in struct grep_opt is a bit iffy, but with
"last_shown" we have a precedent for writing state information to that
struct.
Reported-by: Dotan Cohen <dotancohen@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we marked that this patch-id test is leak-sanitizer clean,
but if we read the test script carefully, it is merely because we
have too many invocations of commands in the "git log" family on the
upstream side of the pipe, hiding breakages from them.
Split the pipeline so that breakages from these commands can be
caught (not limited to aborts due to leak-sanitizer) and unmark
the script as not passing the test with leak-sanitizer in effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RCS keywords are strings that are replaced with information from
Perforce. Examples include $Date$, $Author$, $File$, $Change$ etc.
Perforce resolves these by expanding them with their expanded values
when files are synced, but Git's data model requires these expanded
values to be converted back into their unexpanded form.
Previously, git-p4.py would implement this behaviour through the use of
regular expressions. However, the regular expression substitution was
applied using decoded strings i.e. the content of incoming commit diffs
was first decoded from bytes into UTF-8, processed with regular
expressions, then converted back to bytes.
Not only is this behaviour inefficient, but it is also a cause of a
common issue caused by text files containing invalid UTF-8 data. For
files created in Windows, CP1252 Smart Quote Characters (0x93 and 0x94)
are seen fairly frequently. These codes are invalid in UTF-8, so if the
script encountered any file containing them, on Python 2 the symbols
will be corrupted, and on Python 3 the script will fail with an
exception.
This patch replaces this decoding/encoding with bytes object regular
expressions, so that the substitution is performed directly upon the
source data with no conversions.
A test for smart quote handling has been added to the
t9810-git-p4-rcs.sh test suite.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the usage message emitted by "git stash --invalid-option" to
emit usage information for "git stash" in general, and not just for
the "push" command. I.e. before:
$ git stash --invalid-option
error: unknown option `invalid-option'
usage: git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[--] [<pathspec>...]]
[...]
After:
$ git stash --invalid-option
error: unknown option `invalid-option'
usage: git stash list [<options>]
or: git stash show [<options>] [<stash>]
or: git stash drop [-q|--quiet] [<stash>]
or: git stash ( pop | apply ) [--index] [-q|--quiet] [<stash>]
or: git stash branch <branchname> [<stash>]
or: git stash clear
or: git stash [push [-p|--patch] [-S|--staged] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[--pathspec-from-file=<file> [--pathspec-file-nul]]
[--] [<pathspec>...]]
or: git stash save [-p|--patch] [-S|--staged] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [<message>]
[...]
That we emitted the usage for just "push" in the case of the
subcommand not being explicitly specified was an unintentional
side-effect of how it was implemented. When it was converted to C in
d553f538b8 (stash: convert push to builtin, 2019-02-25) the pattern
of having per-subcommand usage information was rightly continued. The
"git-stash.sh" shellscript did not have that, and always printed the
equivalent of "git_stash_usage".
But in doing so the case of push being implicit and explicit was
conflated. A variable was added to track this in 8c3713cede (stash:
eliminate crude option parsing, 2020-02-17), but it did not update the
usage output accordingly.
This still leaves e.g. "git stash push -h" emitting the
"git_stash_usage" output, instead of "git_stash_push_usage". That
should be fixed, but is a much deeper misbehavior in parse_options()
not being aware of subcommands at all. I.e. in how
PARSE_OPT_KEEP_UNKNOWN and PARSE_OPT_NO_INTERNAL_HELP combine in
commands such as "git stash".
Perhaps PARSE_OPT_KEEP_UNKNOWN should imply
PARSE_OPT_NO_INTERNAL_HELP, or better yet parse_options() should be
extended to fully handle these subcommand cases that we handle
manually in "git stash", "git commit-graph", "git multi-pack-index"
etc. All of those musings would be a much bigger change than this
isolated fix though, so let's leave that for some other time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option helps to record specific empty patches in the middle
of an am session, which does create empty commits only when:
1. the index has not changed
2. lacking a branch
When the index has changed, "--allow-empty" will create a non-empty
commit like passing "--continue" or "--resolved".
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since that the command 'git-format-patch' can include patches of
commits that emit no changes, the 'git-am' command should also
support an option, named as '--empty', to specify how to handle
those empty patches. In this commit, we have implemented three
valid options ('stop', 'drop' and 'keep').
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most sparse-checkout subcommands (list, add, reapply) only make sense
when already in a sparse state. Add a quick check that will error out
early if this is not the case.
Also document with a comment why we do not exit early in `disable` even
when core.sparseCheckout starts as false.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test helper for refs subsystem learned to write bogus and/or
nonexistent object name to refs to simulate error situations we
want to test Git in.
* hn/allow-bogus-oid-in-ref-tests:
t1430: create valid symrefs using test-helper
t1430: remove refs using test-tool
refs: introduce REF_SKIP_REFNAME_VERIFICATION flag
refs: introduce REF_SKIP_OID_VERIFICATION flag
refs: update comment.
test-ref-store: plug memory leak in cmd_delete_refs
test-ref-store: parse symbolic flag constants
test-ref-store: remove force-create argument for create-reflog
"default" and "reset" colors have been added to our palette.
* re/color-default-reset:
color: allow colors to be prefixed with "reset"
color: support "default" to restore fg/bg color
color: add missing GIT_COLOR_* white/black constants
The sparse-index/sparse-checkout feature had a bug in its use of
the matching code to determine which path is in or outside the
sparse checkout patterns.
* ds/sparse-deep-pattern-checkout-fix:
unpack-trees: use traverse_path instead of name
t1092: add deeper changes during a checkout
Many tests that used to need GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
mechanism to force "git" to use 'master' as the default name for
the initial branch no longer need it; the use of the mechanism from
them have been removed.
* js/test-initial-branch-override-cleanup:
tests: set GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME only when needed
"git worktree add" showed "Preparing worktree" message to the
standard output stream, but when it failed, the message from die()
went to the standard error stream. Depending on the order the
stdio streams are flushed at the program end, this resulted in
confusing output. It has been corrected by sending all the chatty
messages to the standard error stream.
* es/worktree-chatty-to-stderr:
git-worktree.txt: add missing `-v` to synopsis for `worktree list`
worktree: send "chatty" messages to stderr
Prepare tests on ref API to help testing reftable backends.
* hn/reflog-tests:
refs/debug: trim trailing LF from reflog message
test-ref-store: tweaks to for-each-reflog-ent format
t1405: check for_each_reflog_ent_reverse() more thoroughly
test-ref-store: don't add newline to reflog message
show-branch: show reflog message
API clean-up.
* ab/run-command:
run-command API: remove "env" member, always use "env_array"
difftool: use "env_array" to simplify memory management
run-command API: remove "argv" member, always use "args"
run-command API users: use strvec_push(), not argv construction
run-command API users: use strvec_pushl(), not argv construction
run-command tests: use strvec_pushv(), not argv assignment
run-command API users: use strvec_pushv(), not argv assignment
upload-archive: use regular "struct child_process" pattern
worktree: stop being overly intimate with run_command() internals
"Zealous diff3" style of merge conflict presentation has been added.
* en/zdiff3:
update documentation for new zdiff3 conflictStyle
xdiff: implement a zealous diff3, or "zdiff3"
The default setting for trace2 event nesting was too low to cause
test failures, which is worked around by bumping it up in the test
framework.
* ds/trace2-regions-in-tests:
t/t*: remove custom GIT_TRACE2_EVENT_NESTING
test-lib.sh: set GIT_TRACE2_EVENT_NESTING
The test framework learns to list unsatisfied test prerequisites,
and optionally error out when prerequisites that are expected to be
satisfied are not.
* fs/test-prereq:
test-lib: make BAIL_OUT() work in tests and prereq
test-lib: introduce required prereq for test runs
test-lib: show missing prereq summary
More tests are marked as leak-free.
* ab/mark-leak-free-tests-even-more:
leak tests: mark some fast-import tests as passing with SANITIZE=leak
leak tests: mark some config tests as passing with SANITIZE=leak
leak tests: mark some status tests as passing with SANITIZE=leak
leak tests: mark some clone tests as passing with SANITIZE=leak
leak tests: mark some add tests as passing with SANITIZE=leak
leak tests: mark some diff tests as passing with SANITIZE=leak
leak tests: mark some apply tests as passing with SANITIZE=leak
leak tests: mark some notes tests as passing with SANITIZE=leak
leak tests: mark some update-index tests as passing with SANITIZE=leak
leak tests: mark some rev-parse tests as passing with SANITIZE=leak
leak tests: mark some rev-list tests as passing with SANITIZE=leak
leak tests: mark some misc tests as passing with SANITIZE=leak
leak tests: mark most gettext tests as passing with SANITIZE=leak
leak tests: mark "sort" test as passing SANITIZE=leak
leak tests: mark a read-tree test as passing SANITIZE=leak
The "reftable" backend for the refs API, without integrating into
the refs subsystem, has been added.
* hn/reftable:
Add "test-tool dump-reftable" command.
reftable: add dump utility
reftable: implement stack, a mutable database of reftable files.
reftable: implement refname validation
reftable: add merged table view
reftable: add a heap-based priority queue for reftable records
reftable: reftable file level tests
reftable: read reftable files
reftable: generic interface to tables
reftable: write reftable files
reftable: a generic binary tree implementation
reftable: reading/writing blocks
Provide zlib's uncompress2 from compat/zlib-compat.c
reftable: (de)serialization for the polymorphic record type.
reftable: add blocksource, an abstraction for random access reads
reftable: utility functions
reftable: add error related functionality
reftable: add LICENSE
hash.h: provide constants for the hash IDs
Some users or scripts will pipe "git diff"
output to "git apply" when replaying diffs
or commits. In these cases, they will rely
on the return value of "git apply" to know
whether the diff was applied successfully.
However, for empty commits, "git apply" will
fail. This complicates scripts since they
have to either buffer the diff and check
its length, or run diff again with "exit-code",
essentially doing the diff twice.
Add the "--allow-empty" flag to "git apply"
which allows it to handle both empty diffs
and empty commits created by "git format-patch
--always" by doing nothing and returning 0.
Add tests for both with and without --allow-empty.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because `sed` is line-oriented, for ease of implementation, when
chainlint.sed encounters an opening subshell in which the first command
is cuddled with the "(", it splits the line into two lines: one
containing only "(", and the other containing whatever follows "(".
This allows chainlint.sed to get by with a single set of regular
expressions for matching shell statements rather than having to
duplicate each expression (one set for matching non-cuddled statements,
and one set for matching cuddled statements).
However, although syntactically and semantically immaterial, this
transformation has no value to test authors and might even confuse them
into thinking that the linter is misbehaving by inserting (whitespace)
line-noise into the shell code it is validating. Moreover, it also
allows an implementation detail of chainlint.sed to seep into the
chainlint self-test "expect" files, which potentially makes it difficult
to reuse the self-tests should a more capable chainlint ever be
developed.
To address these concerns, stop splitting cuddled "(..." into two lines.
Note that, as an implementation artifact, due to sed's line-oriented
nature, this change inserts a blank line at output time just before the
"(..." line is emitted. It would be possible to suppress this blank line
but doing so would add a fair bit of complexity to chainlint.sed.
Therefore, rather than suppressing the extra blank line, the Makefile's
`check-chainlint` target which runs the chainlint self-tests is instead
modified to ignore blank lines when comparing chainlint output against
the self-test "expect" output. This is a reasonable compromise for two
reasons. First, the purpose of the chainlint self-tests is to verify
that the ?!AMP?! annotations are being correctly added; precise
whitespace is immaterial. Second, by necessity, chainlint.sed itself
already throws away all blank lines within subshells since, when
checking for a broken &&-chain, it needs to check the final _statement_
in a subshell, not the final _line_ (which might be blank), thus it has
never made any attempt to precisely reproduce blank lines in its output.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking for broken a &&-chain, chainlint.sed knows that the final
statement in a subshell should not end with `&&`, so it takes care to
make a distinction between the final line which is an actual statement
and any lines which may be mere comments preceding the closing ')'. As
such, it swallows comment lines so that they do not interfere with the
&&-chain check.
However, since `sed` does not provide any sort of real recursion,
chainlint.sed only checks &&-chains in subshells one level deep; it
doesn't do any checking in deeper subshells or in `{...}` blocks within
subshells. Furthermore, on account of potential implementation
complexity, it doesn't check &&-chains within `case` arms.
Due to an oversight, it also doesn't swallow comments inside deep
subshells, `{...}` blocks, or `case` statements, which makes its output
inconsistent (swallowing comments in some cases but not others).
Unfortunately, this inconsistency seeps into the chainlint self-test
"expect" files, which potentially makes it difficult to reuse the
self-tests should a more capable chainlint ever be developed. Therefore,
teach chainlint.sed to consistently swallow comments in all cases.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of chainlint is to highlight problems it finds in test code
by inserting annotations at the location of each problem. Arbitrarily
eliding bits of the code it is checking is not helpful, yet this is
exactly what chainlint.sed does by cavalierly and unnecessarily dropping
the here-doc operator and tag; i.e. `cat <<TAG` becomes simply `cat` in
the output. This behavior can make it more difficult for the test writer
to align the annotated output of chainlint.sed with the original test
code. Address this by retaining here-doc tags.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tighten here-doc recognition to prevent it from being fooled by text
which looks like a here-doc operator but happens merely to be the
content of a string, such as this real-world case from t7201:
echo "<<<<<<< ours" &&
echo ourside &&
echo "=======" &&
echo theirside &&
echo ">>>>>>> theirs"
This problem went unnoticed because chainlint.sed is not a real parser,
but rather applies heuristics to pretend to understand shell code. In
this case, it saw what it thought was a here-doc operator (`<< ours`),
and fell off the end of the test looking for the closing tag "ours"
which it never found, thus swallowed the remainder of the test without
checking it for &&-chain breakage.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to POSIX, "<<" and "<<-" are distinct shell operators. For the
latter to be recognized, no whitespace is allowed before the "-", though
whitespace is allowed after the operator. However, the chainlint
patterns which identify here-docs are both too loose and too tight,
incorrectly allowing whitespace between "<<" and "-" but disallowing it
between "-" and the here-doc tag. Fix the patterns to better match
POSIX.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
chainlint.sed inserts a ">" annotation at the beginning of a line to
signal that its heuristics have identified an end-of-subshell. This was
useful as a debugging aid during development of the script, but it has
no value to test writers and might even confuse them into thinking that
the linter is misbehaving by inserting line-noise into the shell code it
is validating. Moreover, its presence also potentially makes it
difficult to reuse the chainlint self-test "expect" output should a more
capable linter ever be developed. Therefore, drop the ">" annotation.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
>From inception, when chainlint.sed encountered a line using semicolon to
separate commands rather than `&&`, it would insert a ?!SEMI?!
annotation at the beginning of the line rather ?!AMP?! even though the
&&-chain is also broken by the semicolon. Given a line such as:
?!SEMI?! cmd1; cmd2 &&
the ?!SEMI?! annotation makes it easier to see what the problem is than
if the output had been:
?!AMP?! cmd1; cmd2 &&
which might confuse the test author into thinking that the linter is
broken (since the line clearly ends with `&&`).
However, now that the ?!AMP?! an ?!SEMI?! annotations are inserted at
the point of breakage rather than at the beginning of the line, and
taking into account that both represent a broken &&-chain, there is
little reason to distinguish between the two. Using ?!AMP?! alone is
sufficient to point the test author at the problem. For instance, in:
cmd1; ?!AMP?! cmd2 &&
cmd3
it is clear that the &&-chain is broken between `cmd1` and `cmd2`.
Likewise, in:
cmd1 && cmd2 ?!AMP?!
cmd3
it is clear that the &&-chain is broken between `cmd2` and `cmd3`.
Finally, in:
cmd1; ?!AMP?! cmd2 ?!AMP?!
cmd3
it is clear that the &&-chain is broken between each command.
Hence, there is no longer a good reason to make a distinction between a
broken &&-chain due to a semicolon and a broken chain due to a missing
`&&` at end-of-line. Therefore, drop the ?!SEMI?! annotation and use
?!AMP?! exclusively.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
chainlint.sed flags ";" when used as a command terminator since it
breaks the &&-chain, thus can allow failures to go undetected. However,
when a command terminated by ";" is the last command in the body of a
compound statement, such as `command-2` in:
if test $# -gt 1
then
command-1 &&
command-2;
fi
then the ";" is harmless and the exit code from `command-2` is passed
through untouched and becomes the exit code of the compound statement,
as if the ";" was not present. Therefore, tolerate a trailing ";" in
this position rather than complaining about broken &&-chain.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When chainlint.sed detects commands separated by a semicolon rather than
by `&&`, it places a ?!SEMI?! annotation at the beginning of the line.
However, this is an unusual location for programmers accustomed to error
messages (from compilers, for instance) indicating the exact point of
the problem. Therefore, relocate the ?!SEMI?! annotation to the location
of the semicolon in order to better direct the programmer's attention to
the source of the problem.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When chainlint.sed detects a broken &&-chain, it places an ?!AMP?!
annotation at the beginning of the line. However, this is an unusual
location for programmers accustomed to error messages (from compilers,
for instance) indicating the exact point of the problem. Therefore,
relocate the ?!AMP?! annotation to the end of the line in order to
better direct the programmer's attention to the source of the problem.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than running `chainlint` and `diff` once per self-test -- which
may become expensive as more tests are added -- instead run `chainlint`
a single time over all tests bodies collectively and compare the result
to the collective "expected" output.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of chainlint.sed is to detect &&-chain breakage only within
subshells (one level deep); it doesn't bother checking for top-level
&&-chain breakage since the &&-chain checker built into t/test-lib.sh
should detect broken &&-chains outside of subshells by making them
magically exit with code 117.
Unfortunately, one of the chainlint.sed self-tests has overly intimate
knowledge of this particular division of responsibilities and only cares
about what chainlint.sed itself will produce, while ignoring the fact
that a more all-encompassing linter would complain about a broken
&&-chain outside the subshell. This makes it difficult to re-use the
test with a more capable chainlint implementation should one ever be
developed. Therefore, adjust the test and its "expected" output to
avoid being specific to the tunnel-vision of this one implementation.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of chainlint.sed is to detect &&-chain breakage only within
subshells (one level deep); it doesn't bother checking for top-level
&&-chain breakage since the &&-chain checker built into t/test-lib.sh
should detect broken &&-chains outside of subshells by making them
magically exit with code 117. However, this division of labor may not
always be the case if a more capable chainlint implementation is ever
developed. Beyond that, due to being sed-based and due to its use of
heuristics, chainlint.sed has several limitations (such as being unable
to detect &&-chain breakage in subshells more than one level deep since
it only manually emulates recursion into a subshell).
Some of the comments in the chainlint self-tests unnecessarily reflect
the limitations of chainlint.sed even though those limitations are not
what is being tested. Therefore, simplify and generalize the comments to
explain only what is being tested, thus ensuring that they won't become
outdated if a more capable chainlint is ever developed.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The chainlint self-test code snippets are supposed to represent the body
of a test_expect_success() or test_expect_failure(), yet the contents of
a few tests would have caused the shell to report syntax errors had they
been real test bodies due to the mix of single- and double-quotes.
Although chainlint.sed, with its simplistic heuristics, is blind to this
problem, a future more robust chainlint implementation might not have
such a limitation. Therefore, stop mixing quote types haphazardly in
those tests and unify quoting throughout. While at it, drop chunks of
tests which merely repeat what is already tested elsewhere but with
alternative quotes.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The chainlint self-test code snippets are supposed to represent the body
of a test_expect_success() or test_expect_failure(), yet the contents of
these tests would have caused the shell to report syntax errors had they
been real test bodies. Although chainlint.sed, with its simplistic
heuristics, is blind to these syntactic problems, a future more robust
chainlint implementation might not have such a limitation, so make these
snippets syntactically valid.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than manually looping over a set of items and plugging those
items into a template string which is printed repeatedly, achieve the
same effect by taking advantage of `printf` which loops over its
arguments automatically.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than maintaining a flag indicating a failure within a loop and
aborting the test when the loop ends if the flag is set, modern practice
is to signal the failure immediately by exiting the loop early via
`return 1` (or `exit 1` if inside a subshell). Simplify these loops by
following the modern idiom.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the way these tests signal failure by employing the modern
idiom of making the `if` or `case` statement resolve to false when an
error is detected.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
