These sites offer https versions of their content.
Using the https versions provides some protection for users.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "say" function, with various rewrites of the remaining
git-*.sh code to C and the preceding change to have git-submodule.sh
stop using the GIT_QUIET variable there were only four uses in
git-subtree.sh. Let's have it use an "arg_quiet" variable instead, and
move the "say" function over to it.
The only other use was a trivial message in git-instaweb.sh, since it
has never supported the --quiet option (or similar) that code added in
0b624b4cee (instaweb: restart server if already running, 2009-11-22)
can simply use "echo" instead.
The remaining in-tree hits from "say" are all for the sibling function
defined in t/test-lib.sh. It's safe to remove this function since it
has never been documented in Documentation/git-sh-setup.txt.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the sane_grep() shell function in git-sh-setup. The two reasons
for why it existed don't apply anymore:
1. It was added due to GNU grep supporting GREP_OPTIONS. See
e1622bfcba (Protect scripted Porcelains from GREP_OPTIONS insanity,
2009-11-23).
Newer versions of GNU grep ignore that, but even on older versions
its existence won't matter, none of these sane_grep() uses care
about grep's output, they're merely using it to check if a string
exists in a file or stream. We also don't care about the "LC_ALL=C"
that "sane_grep" was using, these greps for fixed or ASCII strings
will behave the same under any locale.
2. The SANE_TEXT_GREP added in 71b401032b (sane_grep: pass "-a" if
grep accepts it, 2016-03-08) isn't needed either, none of these grep
uses deal with binary data.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a check for whether mod_perl is a supported mode of gitweb.cgi
added in a51d37c1df (Add git-instaweb, instantly browse the working
repo with gitweb, 2006-07-01).
The reason for the check was to support users who had a newer version
of git and an older version of gitweb, it was then subsequently
adjusted for changes in the script in f0e588dffc (git-instaweb: fix
mod_perl detection for apache2, 2009-08-08).
It's a fair bet that nobody's running a git from 2021 and gitweb from
pre-2007 anymore, so we can unconditionally assume that this will be
supported by gitweb.cgi.
This allows a subsequent commit to remove the sane_grep() wrapper,
this change is split up from that since this is the only case where
the "grep" invocation could be removed entirely.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch it is possible to launch git-instaweb by using
Python http.server CGI handler via `-d python` option.
git-instaweb generates a small wrapper around the http.server
(in GIT_DIR/gitweb/) that address a limitation of the CGI handler
where CGI scripts have to be in a cgi-bin subdirectory and
directory index can't be easily changed. To keep the implementation
small, gitweb is running on url `/cgi-bin/gitweb.cgi` and an automatic
redirection is done when opening `/`.
The generated wrapper is compatible with both Python 2 and 3.
Python is by default installed on most modern Linux distributions
which enables running `git instaweb -d python` without needing
anything else.
Signed-off-by: Arti Zirk <arti.zirk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The generated apache2 config fails with apache >= 2.4. The error log
states:
AH00136: Server MUST relinquish startup privileges before accepting
connections. Please ensure mod_unixd or other system security
module is loaded.
AH00016: Configuration Failed
Fix this by loading the unixd module. This works with older httpd as
well, so no IfVersion conditional is needed. (Tested with httpd-2.2.15
on CentOS-6.)
Written with assistance of Todd Zullinger <tmz@pobox.com>
Signed-off-by: Sebastian Kisela <skisela@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Fedora-derived systems, the apache httpd package installs modules
under /usr/lib{,64}/httpd/modules, depending on whether the system is
32- or 64-bit. A symlink from /etc/httpd/modules is created which
points to the proper module path. Use it to support apache on Fedora,
CentOS, and Red Hat systems.
Written with assistance of Todd Zullinger <tmz@pobox.com> and
Junio C Hamano <gitster@pobox.com>.
Signed-off-by: Sebastian Kisela <skisela@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has configured a value for SHELL_PATH then
be sure to use it for any generated scripts instead of
hard-coding /bin/sh.
The first line of the script is handled specially, but
the embedded #!/bin/sh line in the here document will
not be automatically updated unless it uses @SHELL_PATH@.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect available Apache MPMs and use first available according to
following order of precedence:
mpm_event
mpm_prefork
mpm_worker
Add authz_core module if available to avoid HTTP Error 500 errors.
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the variable $OPTIONS_STUCKLONG is not empty, then rev-parse
option parsing is done in --stuck-long mode.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several of the built shell commands invoke a bare "perl" to
perform some one-liners. This will use the first perl in the
PATH rather than the one specified by the user's SHELL_PATH.
We are not asking these perl invocations to do anything
exotic, so typically any old system perl will do; however,
in some cases the system perl may have unexpected behavior
(e.g., by handling line endings differently). We should err
on the side of using the perl the user pointed us to.
The downside of this is that on systems with a sane perl
setup, we no longer find the perl at runtime, but instead
point to a static perl (like /usr/bin/perl). That means we
will not handle somebody moving perl without rebuilding git,
whereas before we tracked it just fine. This is probably not
a big deal, though, as the built perl scripts already
suffered from this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently start/restart does not generate any configuration files for
spawning a new instance. This means that
$ git instaweb --http=<server> --start
might pick up stale 'httpd.conf' file for a different web server
(e.g. for default lighttpd when requesting apache2).
This commit changes that, and makes git-instaweb generate web server
config file and/or gitweb config file if don't exists.
This required naming config files after the name of web server
(alternate solution would be to somehow mark for which web server was
config file generated).
Note that web servers that embed configuration in server script file,
namely webrick and plackup, and which delete "$conf" in their *_conf
function, would have their config (server script) always regenerated.
Note: this commit introduces a bit of code repetition (but only a few
lines).
Reported-by: Gurjeet Singh <singh.gurjeet@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
As a nice side-effect now the order of parameters does not matter:
$ git instaweb --httpd=apache2 --start
is now (after this patch) the same as
$ git instaweb --start --httpd=apache2
Before this commit --start, --stop, --restart (and their subcommand
versions start, stop, restart) exited immediately.
This is preparatory work for making start/restart check that correct
configuration is set up; this change was required to have access in
start_httpd to requested web browser etc.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Don't repeat yourself: use "$conf" instead of its [current] contents,
namely "$fqgitdir/gitweb/httpd.conf".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
This is preparatory work for making start/restart check that
git-instaweb set up correct configuration, and generate it if it is
missing.
Pure refactoring, no functional changes.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
According to blog post "FindBin, __FILE__, $0 and PSGI woes"
http://bulknews.typepad.com/blog/2011/02/findbin-__file__-0-and-psgi-woes.html
by Tatsuhiko Miyagawa, using 'if (__FILE__ eq $0)' in .psgi code
(to check if script was run from command line), is not supposed to work
since Plack 0.9971.
Replace it with one of proposed solutions; while at it return $app
explicitely, rather than implicitely by being a last expression.
This affects 'plackup' web server.
While at it cleanup whitespace.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git instaweb to browse a local repository, performance is
much less of an issue, and providing as much information as possible has
a higher priority, so it makes sense to enable remote_heads.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows WEBrick to support all the logging functionality
in a manner consistent with the other web servers.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since there are WEBrick configuration settings (including the
upcoming AccessLog support) that cannot be represented in YAML
and require Ruby anyways, the YAML config file is an unnecessary
layer of complexity.
Additionally, the shell script wrapper to start WEBrick is
unecessary since our generated Ruby script can be made
executable in the same manner with /usr/bin/env.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This has been broken since commit be5347b ("httpd logs in a
"$httpd_only" subdirectory").
Since WEBrick has no other way of preserving environment
variables needed for gitweb, we create a shell script wrapper
that sets the environment variables as our CGI interpreter
to run gitweb.cgi.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
On Arch Linux, the executable for the Apache HTTP server keeps
the 'httpd' name and is not named 'apache2'. The path to the
server modules also contains 'httpd' rather than 'apache2'.
Remove some of these assumptions and add the httpd name in where
it may be required. Finally, make some slight style adjustments
to the code we are touching to make it fit the style of the rest
of the script.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
We were passing the non-existent GIT_EXEC_DIR through instead of the real
GIT_EXEC_PATH. In addition, these weren't being passed at all for CGI (non
mod_perl) execution so get them included there as well.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
'CustomLog' is provided by mod_log_config so we need to include the module
in our generated config. This was added in d94775e1f9.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
PSGI is an interface between Perl web applications and web servers, and
Plack is a Perl module and toolkit that contains PSGI middleware, helpers
and adapters to web servers; see http://plackperl.org
PSGI and Plack are inspired by Python's WSGI and Ruby's Rack (and
probably JavaScript's Jack/JSGI).
Plack core distribution includes HTTP::Server::PSGI, a reference PSGI
standalone web server implementation. 'plackup' is a command line
launcher to run PSGI applications from command line, connecting web
app to a web server via Plack::Runner module. By default it uses
HTTP::Server::PSGI as a web server.
git-instaweb generates gitweb.psgi wrapper (in $GIT_DIR/gitweb). This
wrapper uses Plack::App::WrapCGI to compile gitweb.cgi (which is a CGI
script) into a PSGI application using CGI::Compile and CGI::Emulate::PSGI.
git-instaweb then runs this wrapper, using by default HTTP::Server::PSGI
standalone Perl server, via Plack::Runner.
The configuration for 'plackup' is currently embedded in generated
gitweb.psgi wrapper, instead of using httpd.conf ($conf).
To run git-instaweb with '--httpd=plackup', you need to have instaled
Plack core, CGI::Emulate::PSGI, CGI::Compile. Those modules have to be
available for Perl scripts (which can be done for example by setting
PERL5LIB environment variable). This is currently not documented.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add generic httpd_is_ready subroutine, which busy-waits for web server to
be started, by checking if $port is opened on localhost. This is used to
avoid situation where web browser is started before web server is ready to
accept connection, and fails.
It uses IO::Socket::INET module, which is core Perl module since v5.6.0.
Alternate solution, possible for those web servers that can run arbitrary
code hooks after they bind the listen socket (after they start accepting
connections), would be to use some kind of blocking mechanism: FIFO or
lockfile, see
http://thread.gmane.org/gmane.comp.version-control.git/147337/focus=147566
This can be always added later, as a web server specific branch in
httpd_is_ready function.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way running e.g. "git instaweb" after "git instaweb --stop" would
not try to kill already stopped web server.
This is probably important only for those web servers that are
"daemonized" by git-instaweb itself, i.e. for those where it is
git-instaweb that creates pidfile. Currently it is includes only
'mongoose' web server, but it would also include 'plackup' web server
(added in later commit).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-instaweb in its current form (re)creates gitweb.cgi and
(some of) required static files in $GIT_DIR/gitweb/ directory.
Splitting gitweb would make it difficult for git-instaweb to
continue with this method.
Use the instaweb.gitwebdir config variable to point git-instaweb script
to a global directory which contains gitweb files as server root
and the httpd.conf along with server logs and pid go into
'$(GIT_DIR)/gitweb' directory.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Resolve full httpd and create "$httpd_only" subdirectory before
writing httpd.conf so that error.log and access.log go into it.
While at it, change apache2 configuration to use logs in a
similiar fashion.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When used with lighttpd or mongoose, git-instaweb previously passed a
hard-coded, default value of PATH to the gitweb CGI script. Use the invoking
user's value for PATH for this instead. (This is already implicitly the
behaviour for other web servers supported by git-instaweb.)
Signed-off-by: Chris Webb <chris@arachsys.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
This patch will cause git-instaweb to use the minified version of gitweb
support files (e.g. CSS and JavaScript) if they were generated.
Without minification awareness, generating the minified version of
gitweb's support files will generate a broken instaweb script since the
copy of gitweb.cgi will look for gitweb.min.* which will not exist.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a dollar sign in double quotes isn't portable. Escape them with
a backslash or replace the double quotes with single quotes.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-blame:
gitweb: Add link to other blame implementation in blame views
gitweb: Make linking to actions requiring JavaScript a feature
gitweb.js: fix padLeftStr() and its usage
gitweb.js: Harden setting blamed commit info in incremental blame
gitweb.js: fix null object exception in initials calculation
gitweb: Minify gitweb.js if JSMIN is defined
gitweb: Create links leading to 'blame_incremental' using JavaScript
gitweb: Colorize 'blame_incremental' view during processing
gitweb: Incremental blame (using JavaScript)
gitweb: Add optional "time to generate page" info in footer
Conflicts:
Makefile
gitweb/gitweb.css
* maint:
pack-objects: split implications of --all-progress from progress activation
instaweb: restart server if already running
prune-packed: only show progress when stderr is a tty
Conflicts:
builtin-pack-objects.c
Running 'git instaweb' when an instaweb server is already running will
fail (at least when the port is the same) and overwrite the pid file
used to track the currently running server. This turns out to be
especially annoying when the user tries to stop the previously running
server with 'git instaweb --stop' and is instead greeted with an error
message because the pid file has been destroyed.
Instead of allowing a user to start two instaweb servers, stop the
currently running server first and then start the new one. This should
be fine because it was never really possible to start two instaweb
servers in the first place due to the pid file issue outlined above.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people have mod_cgid instead of mod_cgi, most likely as a result of
choosing a threaded MPM.
In cases where the user has both modules, mod_cgi will be preferred in
order to maintain a simpler setup.
This patch also causes instaweb to print a message and die in cases
where there is no module that instaweb knows how to handle.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add 'blame_incremental' view, which uses "git blame --incremental"
and JavaScript (Ajax), where 'blame' use "git blame --porcelain".
* gitweb generates initial info by putting file contents (from
"git cat-file") together with line numbers in blame table
* then gitweb makes web browser JavaScript engine call startBlame()
function from gitweb.js
* startBlame() opens XMLHttpRequest connection to 'blame_data' view,
which in turn calls "git blame --incremental" for a file, and
streams output of git-blame to JavaScript (gitweb.js)
* XMLHttpRequest event handler updates line info in blame view as soon
as it gets data from 'blame_data' (from server), and it also updates
progress info
* when 'blame_data' ends, and gitweb.js finishes updating line info,
it fixes colors to match (as far as possible) ordinary 'blame' view,
and updates information about how long it took to generate page.
Gitweb deals with streamed 'blame_data' server errors by displaying
them in the progress info area (just in case).
The 'blame_incremental' view tries to be equivalent to 'blame' action;
there are however a few differences in output between 'blame' and
'blame_incremental' view:
* 'blame_incremental' always used query form for this part of link(s)
which is generated by JavaScript code. The difference is visible
if we use path_info link (pass some or all arguments in path_info).
Changing this would require implementing something akin to href()
subroutine from gitweb.perl in JavaScript (in gitweb.js).
* 'blame_incremental' always uses "rowspan" attribute, even if
rowspan="1". This simplifies code, and is not visible to user.
* The progress bar and progress info are still there even after
JavaScript part of 'blame_incremental' finishes work.
Note that currently no link generated by gitweb leads to this new view.
This code is based on patch by Petr Baudis <pasky@suse.cz> patch, which
in turn was tweaked up version of Fredrik Kuivinen <frekui@gmail.com>'s
proof of concept patch.
This patch adds GITWEB_JS compile configuration option, and modifies
git-instaweb.sh to take gitweb.js into account. The code for
git-instaweb.sh was taken from Pasky's patch.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mongoose (http://code.google.com/p/mongoose/) is a lightweight web
server. It's just a single binary so it's a lot simpler to configure and
install.
Signed-off-by: Wilhansen Li <wil@nohakostudios.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script was looking for something that matched the '^our $gitbin'
regex, which no longer exists in gitweb.cgi.
Now it looks for 'MOD_PERL', which should be on the line that checks
to see if the script is running in a mod_perl environment.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bodo Schlecht noticed that Instaweb didn't propely quote all
path instances in the Apache config file it generated.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows calling:
git-instaweb -d apache2
and have the script Do The Right Thing. In particular, the auto-discovery
mechanism has been extended in order to be used for module listing as
well, and the call convention is that if the daemon is apache2/lighttpd
and the parameter to the "-d" option does not end by "-f", the "-f" is
added to the end of the option itself.
Change all backticks to $( ... ) as per Documentation/CodingGuidelines.
Signed-off-by: Flavio Poletti <flavio@polettix.it>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-instaweb relied on a pipe in a sed script, but this is not supported
by MacOS X sed when using BREs. git-instaweb relies on a working perl
in any case, and perl re are more consistent between platforms, so
replace sed invocation with an equivalent perl invocation.
Also, fix the documented -b "" to work without giving a spurious 'command
not found' error.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now "git-instaweb" will try to use the browser configured as
"web.browser", if "instaweb.browser" is not set.
"git-browse-help" will check first "help.browser" and then
"web.browser".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
