Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new "fetch.hideRefs" option can be used to exclude specified refs
from "rev-list --objects --stdin --not --all" traversal for
checking object connectivity, most useful when there are many
unrelated histories in a single repository.
* ew/fetch-hiderefs:
fetch: support hideRefs to speed up connectivity checks
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
With roughly 800 remotes all fetching into their own
refs/remotes/$REMOTE/* island, the connectivity check[1] gets
expensive for each fetch on systems which lack sufficient RAM to
cache objects.
To do a no-op fetch on one $REMOTE out of hundreds, hideRefs now
allows the no-op fetch to take ~30 seconds instead of ~20 minutes
on a noisy, RAM-constrained machine (localhost, so no network latency):
git -c fetch.hideRefs=refs \
-c fetch.hideRefs='!refs/remotes/$REMOTE/' \
fetch $REMOTE
[1] `git rev-list --objects --stdin --not --all --quiet --alternate-refs'
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The for_each_{loose,packed}_object interface uses callback functions,
but not every callback needs all of the parameters. Mark the unused ones
to satisfy -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our graph-traversal functions take callbacks for showing commits and
objects, but not all callbacks need each parameter. Likewise for the
similar traverse_bitmap_commit_list(), which has a different interface
but serves the same purpose. And the include_check mechanism, which
passes along a void pointer which is not always used.
Mark the unused ones to to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" used to use all the local refs as the boundary for
checking connectivity of the data "git push" sent, but now it uses
only the refs that it advertised to the pusher. In a repository with
the .hideRefs configuration, this reduces the resources needed to
perform the check.
cf. <221028.86bkpw805n.gmgdl@evledraar.gmail.com>
cf. <xmqqr0yrizqm.fsf@gitster.g>
* ps/receive-use-only-advertised:
receive-pack: only use visible refs for connectivity check
rev-parse: add `--exclude-hidden=` option
revision: add new parameter to exclude hidden refs
revision: introduce struct to handle exclusions
revision: move together exclusion-related functions
refs: get rid of global list of hidden refs
refs: fix memory leak when parsing hideRefs config
Users can optionally hide refs from remote users in git-upload-pack(1),
git-receive-pack(1) and others via the `transfer.hideRefs`, but there is
not an easy way to obtain the list of all visible or hidden refs right
now. We'll require just that though for a performance improvement in our
connectivity check.
Add a new option `--exclude-hidden=` that excludes any hidden refs from
the next pseudo-ref like `--all` or `--branches`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add the "[--]" for those cases where the *.txt and -h were
inconsistent, or where we incorrectly stated in one but not the other
that the "--" was mandatory.
In the case of "rev-list" both sides were wrong, as we we don't
require one or more paths if "--" is used, e.g. this is OK:
git rev-list HEAD --
That part of this change is not a "doc txt & -h consistency" change,
as we're changing both versions, doing so here makes both sides
consistent.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix various inconsistencies between command SYNOPSIS and the
corresponding -h output where our translatable labels didn't match
up.
In some cases we need to adjust the prose that follows the SYNOPSIS
accordingly, as it refers back to the changed label.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change commands in the "diff" family and "rev-list" to separate the
usage information and option listing with an empty line.
In the case of "git diff -h" we did this already (but let's use a
consistent "\n" pattern there), for the rest these are now consistent
with how the parse_options() API would emit usage.
As we'll see in a subsequent commit this also helps to make the "git
<cmd> -h" output more easily machine-readable, as we can assume that
the usage information is separated from the options by an empty line.
Note that "COMMON_DIFF_OPTIONS_HELP" starts with a "\n", so the
seeming omission of a "\n" here is correct, the second one is provided
by the macro.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--disk-usage' option for git-rev-list was introduced in 16950f8384
(rev-list: add --disk-usage option for calculating disk usage, 2021-02-09).
This is very useful for people inspect their git repo's objects usage
infomation, but the resulting number is quit hard for a human to read.
Teach git rev-list to output a human readable result when using
'--disk-usage'.
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a release_revisions() to various users of "struct rev_info" which
requires a minor refactoring to a "goto cleanup" pattern to use that
function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply coccinelle rules to remove "if (E)" before
"free_commit_list(E)", the function can accept NULL, and further
change cases where "E = NULL" followed to also be unconditionally.
The code changes in this commit were entirely made by the coccinelle
rule being added here, and applied with:
make contrib/coccinelle/free.cocci.patch
patch -p1 <contrib/coccinelle/free.cocci.patch
The only manual intervention here is that the the relevant code in
commit.c has been manually re-indented.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bundle file format gets extended to allow a partial bundle,
filtered by similar criteria you would give when making a
partial/lazy clone.
* ds/partial-bundles:
clone: fail gracefully when cloning filtered bundle
bundle: unbundle promisor packs
bundle: create filtered bundles
rev-list: move --filter parsing into revision.c
bundle: parse filter capability
list-objects: handle NULL function pointers
MyFirstObjectWalk: update recommended usage
list-objects: consolidate traverse_commit_list[_filtered]
pack-bitmap: drop filter in prepare_bitmap_walk()
pack-objects: use rev.filter when possible
revision: put object filter into struct rev_info
list-objects-filter-options: create copy helper
index-pack: document and test the --promisor option
Now that 'struct rev_info' has a 'filter' member and most consumers of
object filtering are using that member instead of an external struct,
move the parsing of the '--filter' option out of builtin/rev-list.c and
into revision.c.
This use within handle_revision_pseudo_opt() allows us to find the
option within setup_revisions() if the arguments are passed directly. In
the case of a command such as 'git blame', the arguments are first
scanned and checked with parse_revision_opt(), which complains about the
option, so 'git blame --filter=blob:none <file>' does not become valid
with this change.
Some commands, such as 'git diff' gain this option without having it
make an effect. And 'git diff --objects' was already possible, but does
not actually make sense in that builtin.
The key addition that is coming is 'git bundle create --filter=<X>' so
we can create bundles containing promisor packs. More work is required
to make them fully functional, but that will follow.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all consumers of traverse_commit_list_filtered() populate the
'filter' member of 'struct rev_info', we can drop that parameter from
the method prototype to simplify things. In addition, the only thing
different now between traverse_commit_list_filtered() and
traverse_commit_list() is the presence of the 'omitted' parameter, which
is only non-NULL for one caller. We can consolidate these two methods by
having one call the other and use the simpler form everywhere the
'omitted' parameter would be NULL.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all consumers of prepare_bitmap_walk() have populated the
'filter' member of 'struct rev_info', we can drop that extra parameter
from the method and access it directly from the 'struct rev_info'.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Placing a 'struct list_objects_filter_options' within 'struct rev_info'
will assist making some bookkeeping around object filters in the future.
For now, let's use this new member to remove a static global instance of
the struct from builtin/rev-list.c.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* add '<>' around arguments where missing
* convert plurals into '...' forms
This applies the style guide for documentation.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if some of these messages are not subject to gettext i18n, this
helps bring a single style of message for a given error type.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, we encourage users to use plumbing commands, like git
rev-list, over porcelain commands, like git log, when scripting.
However, git rev-list has one glaring problem that prevents it from
being used in certain cases: when --pretty is used with a custom format,
it always prints out a line containing "commit" and the object ID. This
makes it unsuitable for many scripting needs, and forces users to use
git log instead.
While we can't change this behavior for backwards compatibility, we can
add an option to suppress this behavior, so let's do so, and call it
"--no-commit-header". Additionally, add the corresponding positive
option to switch it back on.
Note that this option doesn't affect the built-in formats, only custom
formats. This is exactly the same behavior as users already have from
git log and is what most users will be used to.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When providing an object filter, it is currently impossible to also
filter provided items. E.g. when executing `git rev-list HEAD` , the
commit this reference points to will be treated as user-provided and is
thus excluded from the filtering mechanism. This makes it harder than
necessary to properly use the new `--filter=object:type` filter given
that even if the user wants to only see blobs, he'll still see commits
of provided references.
Improve this by introducing a new `--filter-provided-objects` option
to the git-rev-parse(1) command. If given, then all user-provided
references will be subject to filtering.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can sometimes be useful to see which refs are contributing to the
overall repository size (e.g., does some branch have a bunch of objects
not found elsewhere in history, which indicates that deleting it would
shrink the size of a clone).
You can find that out by generating a list of objects, getting their
sizes from cat-file, and then summing them, like:
git rev-list --objects --no-object-names main..branch
git cat-file --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
Though note that the caveats from git-cat-file(1) apply here. We "blame"
base objects more than their deltas, even though the relationship could
easily be flipped. Still, it can be a useful rough measure.
But one problem is that it's slow to run. Teaching rev-list to sum up
the sizes can be much faster for two reasons:
1. It skips all of the piping of object names and sizes.
2. If bitmaps are in use, for objects that are in the
bitmapped packfile we can skip the oid_object_info()
lookup entirely, and just ask the revindex for the
on-disk size.
This patch implements a --disk-usage option which produces the same
answer in a fraction of the time. Here are some timings using a clone of
torvalds/linux:
[rev-list piped to cat-file, no bitmaps]
$ time git rev-list --objects --no-object-names --all |
git cat-file --buffer --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
1459938510
real 0m29.635s
user 0m38.003s
sys 0m1.093s
[internal, no bitmaps]
$ time git rev-list --disk-usage --objects --all
1459938510
real 0m31.262s
user 0m30.885s
sys 0m0.376s
Even though the wall-clock time is slightly worse due to parallelism,
notice the CPU savings between the two. We saved 21% of the CPU just by
avoiding the pipes.
But the real win is with bitmaps. If we use them without the new option:
[rev-list piped to cat-file, bitmaps]
$ time git rev-list --objects --no-object-names --all --use-bitmap-index |
git cat-file --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
1459938510
real 0m6.244s
user 0m8.452s
sys 0m0.311s
then we're faster to generate the list of objects, but we still spend a
lot of time piping and looking things up. But if we do both together:
[internal, bitmaps]
$ time git rev-list --disk-usage --objects --all --use-bitmap-index
1459938510
real 0m0.219s
user 0m0.169s
sys 0m0.049s
then we get the same answer much faster.
For "--all", that answer will correspond closely to "du objects/pack",
of course. But we're actually checking reachability here, so we're still
fast when we ask for more interesting things:
$ time git rev-list --disk-usage --use-bitmap-index v5.0..v5.10
374798628
real 0m0.429s
user 0m0.356s
sys 0m0.072s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that find_bisection() accepts multiple boolean arguments, these may
be combined into a single unsigned integer in order to declutter some of
the code in bisect.c
Also, rename the existing "flags" bitfield to "commit_flags", to
explicitly differentiate it from the new "bisect_flags" bitfield.
Based-on-patch-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add first_parent_only parameter to find_bisection(), removing the
barrier that prevented combining the --bisect and --first-parent flags
when using git rev-list
Based-on-patch-by: Tiago Botelho <tiagonbotelho@hotmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just passes the filter-options struct to prepare_bitmap_walk().
Since the bitmap code doesn't actually support any filters yet, it will
fallback to the non-bitmap code if any --filter is specified. But this
lets us exercise that rejection code path, as well as getting us ready
to test filters via rev-list when we _do_ support them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently you can't use object filters with bitmaps, but we plan to
support at least some filters with bitmaps. Let's introduce some
infrastructure that will help us do that:
- prepare_bitmap_walk() now accepts a list_objects_filter_options
parameter (which can be NULL for no filtering; all the current
callers pass this)
- we'll bail early if the filter is incompatible with bitmaps (just as
we would if there were no bitmaps at all). Currently all filters are
incompatible.
- we'll filter the resulting bitmap; since there are no supported
filters yet, this is always a noop.
There should be no behavior change yet, but we'll support some actual
filters in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since we added reachability bitmap support, we've been able to use
it with rev-list to get the full list of objects, like:
git rev-list --objects --use-bitmap-index --all
But you can't do so without --objects, since we weren't ready to just
show the commits. However, the internals of the bitmap code are mostly
ready for this: they avoid opening up trees when walking to fill in the
bitmaps. We just need to actually pass in the rev_info to
traverse_bitmap_commit_list() so it knows which types to bother
triggering our callback for.
For completeness, the perf test now covers both the existing --objects
case, as well as the new commits-only behavior (the objects one got way
faster when we introduced bitmaps, but obviously isn't improved now).
Here are numbers for linux.git:
Test HEAD^ HEAD
------------------------------------------------------------------------
5310.7: rev-list (commits) 8.29(8.10+0.19) 1.76(1.72+0.04) -78.8%
5310.8: rev-list (objects) 8.06(7.94+0.12) 8.14(7.94+0.13) +1.0%
That run was cheating a little, as I didn't have any commit-graph in the
repository, and we'd built it by default these days when running git-gc.
Here are numbers with a commit-graph:
Test HEAD^ HEAD
------------------------------------------------------------------------
5310.7: rev-list (commits) 0.70(0.58+0.12) 0.51(0.46+0.04) -27.1%
5310.8: rev-list (objects) 6.20(6.09+0.10) 6.27(6.16+0.11) +1.1%
Still an improvement, but a lot less impressive.
We could have the perf script remove any commit-graph to show the
out-sized effect, but it probably makes sense to leave it in what would
be a more typical setup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prior commit taught "--count --objects" to work without bitmaps. We
should be able to get the same answer much more quickly with bitmaps.
Note that we punt on the max_count case here. This perhaps _could_ be
made to work if we find all of the boundary commits and treat them as
UNINTERESTING, subtracting them (and their reachable objects) from the
set we return. That implies an actual commit traversal, but we'd still
be faster due to avoiding opening up any trees. Given the complexity and
the fact that anyone is unlikely to want this, it makes sense to just
fall back to the non-bitmap case for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behavior from "rev-list --count --objects" is nonsensical:
we enumerate all of the objects except commits, but then give a count of
commits. This wasn't planned, and is just what the code happens to do.
Instead, let's give the answer the user almost certainly wanted: the
full count of objects.
Note that there are more complicated cases around cherry-marking, etc.
We'll punt on those for now, but let the user know that we can't produce
an answer (rather than giving them something useless).
We'll test both the new feature as well as a vanilla --count of commits,
since that surprisingly doesn't seem to be covered in the existing
tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few operations in rev-list that are optimized for bitmaps.
Rather than having the code inline in cmd_rev_list(), let's move them
into helpers. This not only makes the flow of the main function simpler,
but it lets us replace the complex "can we do the optimization?"
conditionals with a series of early returns from the functions. That
also makes it easy to add comments explaining those conditions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-list has refused to use bitmaps with pathspec limiting since
c8a70d3509 (rev-list: disable --use-bitmap-index when pruning commits,
2015-07-01). But this is true not just for rev-list, but for anyone who
calls prepare_bitmap_walk(); the code isn't equipped to handle this
case. We never noticed because the only other callers would never pass
a pathspec limiter.
But let's push the check down into prepare_bitmap_walk() anyway. That's
a more logical place for it to live, as callers shouldn't need to know
the details (and must be prepared to fall back to a regular traversal
anyway, since there might not be bitmaps in the repository).
It would also prepare us for a day where this case _is_ handled, but
that's pretty unlikely. E.g., we could use bitmaps to generate the set
of commits, and then diff each commit to see if it matches the pathspec.
That would be slightly faster than a naive traversal that actually walks
the commits. But you'd probably do better still to make use of the newer
commit-graph feature to make walking the commits very cheap.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--use-bitmap-index" option is usually aspirational: if we have
bitmaps and the request can be fulfilled more quickly using them we'll
do so, but otherwise fall back to a non-bitmap traversal.
The exception is object filtering, which explicitly dies if the two
options are combined. Let's convert this to the usual fallback behavior.
This is a minor convenience for now (since the caller can easily know
that --filter and --use-bitmap-index don't combine), but will become
much more useful as we start to support _some_ filters with bitmaps, but
not others.
The test infrastructure here is bigger than necessary for checking this
one small feature. But it will serve as the basis for more filtering
bitmap tests in future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.
* md/list-objects-filter-combo:
list-objects-filter-options: make parser void
list-objects-filter-options: clean up use of ALLOC_GROW
list-objects-filter-options: allow mult. --filter
strbuf: give URL-encoding API a char predicate fn
list-objects-filter-options: make filter_spec a string_list
list-objects-filter-options: move error check up
list-objects-filter: implement composite filters
list-objects-filter-options: always supply *errbuf
list-objects-filter: put omits set in filter struct
list-objects-filter: encapsulate filter components
The list-objects-filter code has two steps to its initialization:
1. parse_list_objects_filter() makes sure the spec is a filter we know
about and is syntactically correct. This step is done by "rev-list"
or "upload-pack" that is going to apply a filter, but also by "git
clone" or "git fetch" before they send the spec across the wire.
2. list_objects_filter__init() runs the type-specific initialization
(using function pointers established in step 1). This happens at
the start of traverse_commit_list_filtered(), when we're about to
actually use the filter.
It's a good idea to parse as much as we can in step 1, in order to catch
problems early (e.g., a blob size limit that isn't a number). But one
thing we _shouldn't_ do is resolve any oids at that step (e.g., for
sparse-file contents specified by oid). In the case of a fetch, the oid
has to be resolved on the remote side.
The current code does resolve the oid during the parse phase, but
ignores any error (which we must do, because we might just be sending
the spec across the wire). This leads to two bugs:
- if we're not in a repository (e.g., because it's git-clone parsing
the spec), then we trigger a BUG() trying to resolve the name
- if we did hit the error case, we still have to notice that later and
bail. The code path in rev-list handles this, but the one in
upload-pack does not, leading to a segfault.
We can fix both by moving the oid resolution into the sparse-oid init
function. At that point we know we have a repository (because we're
about to traverse), and handling the error there fixes the segfault.
As a bonus, we can drop the NULL sparse_oid_value check in rev-list,
since this is now handled in the sparse-oid-filter init function.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the filter_spec string a string_list rather than a raw C string.
The list of strings must be concatted together to make a complete
filter_spec. A future patch will use this capability to build "combine:"
filter specs gradually.
A strbuf would seem to be a more natural choice for this object, but it
unfortunately requires initialization besides just zero'ing out the
memory. This results in all container structs, and all containers of
those structs, etc., to also require initialization. Initializing them
all would be more cumbersome that simply using a string_list, which
behaves properly when its contents are zero'd.
For the purposes of code simplification, change behavior in how filter
specs are conveyed over the protocol: do not normalize the tree:<depth>
filter specs since there should be no server in existence that supports
tree:# but not tree:#k etc.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow easier parsing by cat-file by giving rev-list an option to print
only the OID of a non-commit object without any additional information.
This is a short-term shim; later on, rev-list should be taught how to
print the types of objects it finds in a format similar to cat-file's.
Before this commit, the output from rev-list needed to be massaged
before being piped to cat-file, like so:
git rev-list --objects HEAD | cut -f 1 -d ' ' |
git cat-file --batch-check
This was especially unexpected when dealing with root trees, as an
invisible whitespace exists at the end of the OID:
git rev-list --objects --filter=tree:1 --max-count=1 HEAD |
xargs -I% echo "AA%AA"
Now, it can be piped directly, as in the added test case:
git rev-list --objects --no-object-names HEAD | git cat-file --batch-check
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Change-Id: I489bdf0a8215532e540175188883ff7541d70e1b
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our finish_commit() function used to be passed directly to the revision
machinery as a callback. But after 989937221a (rev-list: fix
--verify-objects --quiet becoming --objects, 2012-02-28), it is used
only as a helper in show_commit().
It doesn't use its void "data" parameter, and we no longer have to
conform to the callback interface. Let's drop it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code tightening against a "wrong" object appearing where an object
of a different type is expected, instead of blindly assuming that
the connection between objects are correctly made.
* tb/unexpected:
rev-list: detect broken root trees
rev-list: let traversal die when --missing is not in use
get_commit_tree(): return NULL for broken tree
list-objects.c: handle unexpected non-tree entries
list-objects.c: handle unexpected non-blob entries
t: introduce tests for unexpected object types
t: move 'hex2oct' into test-lib-functions.sh
Commit 7c0fe330d5 (rev-list: handle missing tree objects properly,
2018-10-05) taught the traversal machinery used by git-rev-list to
ignore missing trees, so that rev-list could handle them itself.
However, it does so only by checking via oid_object_info_extended() that
the object exists at all. This can miss several classes of errors that
were previously detected by rev-list:
- type mismatches (e.g., we expected a tree but got a blob)
- failure to read the object data (e.g., due to bitrot on disk)
This is especially important because we use "rev-list --objects" as our
connectivity check to admit new objects to the repository, and it will
now miss these cases (though the bitrot one is less important here,
because we'd typically have just hashed and stored the object).
There are a few options to fix this:
1. we could check these properties in rev-list when we do the existence
check. This is probably too expensive in practice (perhaps even for
a type check, but definitely for checking the whole content again,
which implies loading each object into memory twice).
2. teach the traversal machinery to differentiate between a missing
object, and one that could not be loaded as expected. This probably
wouldn't be too hard to detect type mismatches, but detecting bitrot
versus a truly missing object would require deep changes to the
object-loading code.
3. have the traversal machinery communicate the failure to the caller,
so that it can decide how to proceed without re-evaluting the object
itself.
Of those, I think (3) is probably the best path forward. However, this
patch does none of them. In the name of expediently fixing the
regression to a normal "rev-list --objects" that we use for connectivity
checks, this simply restores the pre-7c0fe330d5 behavior of having the
traversal die as soon as it fails to load a tree (when --missing is set
to MA_ERROR, which is the default).
Note that we can't get rid of the object-existence check in
finish_object(), because this also handles blobs (which are not
otherwise checked at all by the traversal code).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update broke "is this object available to us?" check for
well-known objects like an empty tree (which should yield "yes",
even when there is no on-disk object for an empty tree), which has
been corrected.
* jk/virtual-objects-do-exist:
rev-list: allow cached objects in existence check
This fixes a regression in 7c0fe330d5 (rev-list: handle missing tree
objects properly, 2018-10-05) where rev-list will now complain about the
empty tree when it doesn't physically exist on disk.
Before that commit, we relied on the traversal code in list-objects.c to
walk through the trees. Since it uses parse_tree(), we'd do a normal
object lookup that includes looking in the set of "cached" objects
(which is where our magic internal empty-tree kicks in).
After that commit, we instead tell list-objects.c not to die on any
missing trees, and we check them ourselves using has_object_file(). But
that function uses OBJECT_INFO_SKIP_CACHED, which means we won't use our
internal empty tree.
This normally wouldn't come up. For most operations, Git will try to
write out the empty tree object as it would any other object. And
pack-objects in a push or fetch will send the empty tree (even if it's
virtual on the sending side). However, there are cases where this can
matter. One I found in the wild:
1. The root tree of a commit became empty by deleting all files,
without using an index. In this case it was done using libgit2's
tree builder API, but as the included test shows, it can easily be
done with regular git using hash-object.
The resulting repo works OK, as we'd avoid walking over our own
reachable commits for a connectivity check.
2. Cloning with --reference pointing to the repository from (1) can
trigger the problem, because we tell the other side we already have
that commit (and hence the empty tree), but then walk over it
during the connectivity check (where we complain about it missing).
Arguably the workflow in step (1) should be more careful about writing
the empty tree object if we're referencing it. But this workflow did
work prior to 7c0fe330d5, so let's restore it.
This patch makes the minimal fix, which is to swap out a direct call to
oid_object_info_extended(), minus the SKIP_CACHED flag, instead of
calling has_object_file(). This is all that has_object_file() is doing
under the hood. And there's little danger of unrelated fallout from
other unexpected "cached" objects, since there's only one call site that
ends such a cached object, and it's in git-blame.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" learned another algorithm to compute the set of
objects to send, that trades the resulting packfile off to save
traversal cost to favor small pushes.
* ds/push-sparse-tree-walk:
pack-objects: create GIT_TEST_PACK_SPARSE
pack-objects: create pack.useSparse setting
revision: implement sparse algorithm
list-objects: consume sparse tree walk
revision: add mark_tree_uninteresting_sparse
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...