Since we cannot stash dirty submodules, there is no use in requiring
them to be clean (or stash them when they are not).
This brings the built-in rebase in line with the previous, scripted
version, which also did not care about dirty submodules (but it was
admittedly not very easy to figure that out).
This fixes https://github.com/git-for-windows/git/issues/1820
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git stash apply <argument>` sees an argument that consists only of
digits, it tries to be smart and interpret it as `stash@{<number>}`.
Unfortunately, an all-digit hash (which is unlikely but still possible)
is therefore misinterpreted as `stash@{<n>}` reflog.
To prevent that from happening, let's append `^0` after the stash hash,
to make sure that it is interpreted as an OID rather than as a number.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was reported by Gábor Szeder and analyzed by Alban Gruin that the
built-in rebase stores only abbreviated stash hashes in the `autostash`
file.
This is problematic e.g. in t5520-pull.sh, where the abbreviated hash is
so short that it sometimes consists only of digits, which are
subsequently mistaken ("DWIMmed") for numbers by `git stash apply`.
Let's align the behavior of the built-in rebase with the scripted rebase
and store the full stash hash instead. That makes it a lot less likely
that it consists only of digits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already called that function at this point, and stored the result in
the `path` variable. We might just as well use it ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The separator between words in a multi-word option name is a dash,
not an underscore.
Inspired by a matching change by Ralf Thielow for the scripted
version of "git rebase".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the builtin rebase is feature-complete, we should use it by
default. Let's keep the legacy scripted version around for the time
being; Once the builtin rebase is well-tested enough, we can remove
`git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin rebase and the builtin interactive rebase have been
developed independently, on purpose: Google Summer of Code rules
specifically state that students have to work on independent projects,
they cannot collaborate on the same project.
One fallout is that the rebase-in-c and rebase-i-in-c patches cause no
merge conflicts but a royal number of tests in the test suite to fail.
It is easy to explain why: rebase-in-c was developed under the
assumption that all rebase backends are implemented in Unix shell script
and can be sourced via `. git-rebase--<backend>`, which is no longer
true with rebase-i-in-c, where git-rebase--interactive is a hard-linked
builtin.
This patch fixes that.
Please note that we also skip the finish_rebase() call for interactive
rebases because the built-in interactive rebase already takes care of
that. This is needed to support the upcoming `break` command that wants
to interrupt the rebase with exit code 0 (and naturally wants to keep
the state directory intact when doing so).
While at it, remove the `case` arm for the interactive rebase that is
now skipped in favor of the short-cut to the built-in rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on the GSoC project to convert the rebase command to a
builtin, the rebase command learned to error out on certain command-line
option combinations that cannot work, such as --whitespace=fix with
--interactive.
This commit converts that code.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some options are only handled by the git-rebase--interactive backend,
even if run non-interactively. For this awkward situation (run
non-interactively, but use the interactive backend), the shell scripted
version of `git rebase` introduced the concept of an "implied
interactive rebase". All it does is to replace the editor by a dummy one
(`:` is the Unix command that takes arbitrary command-line parameters,
ignores them and simply exits with success).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this commit, we pass `--progress` to the `format-patch` command if
stderr is connected to an interactive terminal, unless we're in quiet
mode.
This `--progress` option will be used in `format-patch` to show progress
reports on stderr as patches are generated.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to rebase onto a direct descendant of HEAD, we can
take a shortcut and fast-forward instead. This commit makes it so.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we will make use of that in the code that
fast-forwards to `onto` whenever possible.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git rebase` command, when called without the `<upstream>`
command-line argument, automatically looks for the upstream
branch configured for the current branch.
With this commit, the builtin rebase learned that trick, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option allows to rebase entire histories up to, and including, the
root commit.
The conversion from the shell script is straight-forward, apart from
the fact that we do not have to write an empty tree in C.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a rebase in non-am mode, it uses the recursive merge to
cherry-pick the commits, and the rebase command allows to configure
the merge strategy to be used in this operation.
This commit adds that support to the builtin rebase.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--fork-point` and `--no-fork-point`.
This is converted as-is from `git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mode to rebase non-linear branches is now supported by the builtin
rebase, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces the `--allow-empty-message` option to
`builtin/rebase.c`. The motivation behind this option is: if there are
empty messages (which is not allowed in Git by default, but can be
imported from different version control systems), the rebase will fail.
Using `--allow-empty-message` overrides that behaviour which will allow
the commits having empty messages to continue in rebase operation.
Note: a very recent change made this the default in the shell scripted
`git rebase`, therefore the builtin rebase does the same.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--exec` option which takes a shell
command-line as argument. This argument will be appended as an `exec
<cmd>` command after each line in the todo list that creates a commit in
the final history. commands.
Note: while the shell script version of `git rebase` assigned the empty
string to `cmd` by default, we *unset* it here because the code looks
nicer and it does not change the behavior.
The `--exec` option requires `--interactive` machinery.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To support `--autostash` we introduce a function `apply_autostash()`
just like in `git-legacy-rebase.sh`.
Rather than refactoring and using the same function that exists in
`sequencer.c`, we go a different route here, to avoid clashes with
the sister GSoC project that turns the interactive rebase into a
builtin.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit converts more code from the shell script version to the
builtin rebase. In this instance, we just have to be careful to
keep support for passing multiple `--whitespace` options, as the
shell script version does so, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces support for `--gpg-sign` option which is used
to GPG-sign commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--autosquash` option which is used to
automatically squash the commits marked as `squash` or `fixup` in their
messages. This is converted following `git-legacy-rebase.sh` closely.
This option can also be configured via the Git config setting
rebase.autosquash. To support this, we also add a custom
rebase_config() function in this commit that will be used instead (and
falls back to) git_default_config().
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--keep-empty` option can be used to keep the commits that do not
change anything from its parents in the result.
While the scripted version uses `interactive_rebase=implied` to indicate
that the rebase needs to use the `git-rebase--interactive` backend in
non-interactive mode as fallback when figuring out which backend to use,
the C version needs to use a different route because the backend will
already be chosen during the `parse_options()` call.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--ignore-date` which is passed to `git am`
to easily change the dates of the rebased commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--ignore-whitespace` option
of the rebase command. This option is simply passed to the
`--am` backend.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is simply handed down to `git am` by way of setting the
`git_am_opt` variable that is handled by the `git-rebase--am` backend.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--rerere-autoupdate` option allows rerere to update the index with
resolved conflicts. This commit follows closely the equivalent part of
`git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--signoff` which is used to add a
`Signed-off-by` trailer to all the rebased commits. The actual
handling is left to the rebase backends.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this commit the builtin rebase supports selecting the "rebase
backends" (or "type") `interactive`, `preserve-merges`, and `merge`.
The `state_dir` was already handled according to the rebase type in a
previous commit.
Note that there is one quirk in the shell script: `--interactive`
followed by `--merge` won't reset the type to "merge" but keeps the type
as "interactive". And as t3418 tests this explicitly, we have to support
it in the builtin rebase, too.
Likewise, `--interactive` followed by `--preserve-merges` makes it an
"explicitly interactive" rebase, i.e. a rebase that should show the todo
list, while `--preserve-merges` alone is not interactive (and t5520
tests for this via `git pull --rebase=preserve`).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit checks for the file `applying` used by `git am` in
`rebase-apply/` and if the file is present it means `git am` is in
progress so it errors out.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit prevents actions (such as --continue, --skip) from running
when there is no rebase in progress.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While these sub-commands are very different in spirit, their
implementation is almost identical, so we convert them in one go.
And since those are the last sub-commands that needed to be converted,
now we can also turn that `default:` case into a bug (because we should
now handle all the actions).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, the builtin rebase handles the `--quit` action which
can be used to abort a rebase without rolling back any changes performed
during the rebase (this is useful when a user forgot that they were in
the middle of a rebase and continued working normally).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches the builtin rebase the "abort" action, which a user
can call to roll back a rebase that is in progress.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds the option `--skip` which is used to restart
rebase after skipping the current patch.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds the option `--continue` which is used to resume
rebase after merge conflicts. The code tries to stay as close to
the equivalent shell scripts found in `git-legacy-rebase.sh` as
possible.
When continuing a rebase, the state variables are read from state_dir.
Some of the state variables are not actually stored there, such as
`upstream`. The shell script version simply does not set them, but for
consistency, we unset them in the builtin version.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `switch-to` which is used to switch to the
target branch if needed. The equivalent codes found in shell script
`git-legacy-rebase.sh` is converted to builtin `rebase.c`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a rebase on a detached HEAD, we currently store the string
"detached HEAD" in options.head_name. That is a faithful translation of
the shell script version, and we still kind of need it for the purposes of
the scripted backends.
It is poor style for C, though, where we would really only want a valid,
fully-qualified ref name as value, and NULL for detached HEADs, using
"detached HEAD" for display only. Make it so.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To run a new rebase, there needs to be a check to assure that no other
rebase is in progress. New rebase operation cannot start until an
ongoing rebase operation completes or is terminated.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this commit, we add support to `--force-rebase` option. The
equivalent part of the shell script found in `git-legacy-rebase.sh` is
converted as faithfully as possible to C.
The --force-rebase option ensures that the rebase does not simply
fast-forward even if it could.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this commit, we add support to fast forward.
Note: we will need the merge base later, therefore the call to
can_fast_forward() really needs to be the first one when testing whether
we can skip the rebase entirely (otherwise, it would make more sense to
skip the possibly expensive operation if, say, running an interactive
rebase).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit reads the index of the repository for rebase and checks
whether the repository is ready for rebase.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces support for the `-v` and `--stat` options of
rebase.
The --stat option can also be configured via the Git config setting
rebase.stat. To support this, we also add a custom rebase_config()
function in this commit that will be used instead of (and falls back to
calling) git_default_config().
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces a rebase option `--quiet`. While `--quiet` is
commonly perceived as opposite to `--verbose`, this is not the case for
the rebase command: both `--quiet` and `--verbose` default to `false` if
neither `--quiet` nor `--verbose` is present.
Despite the default being `false` for both verbose and quiet mode,
passing the `--quiet` option will turn off verbose mode, and `--verbose`
will turn off quiet mode.
This patch introduces the `flags` bit field, with `REBASE_NO_QUIET`
as first user (with many more to come).
We do *not* use `REBASE_QUIET` here for an important reason: To keep the
implementation simple, this commit introduces `--no-quiet` instead of
`--quiet`, so that a single `OPT_NEGBIT()` can turn on quiet mode and
turn off verbose and diffstat mode at the same time. Likewise, the
companion commit which will introduce support for `--verbose` will have
a single `OPT_BIT()` that turns off quiet mode and turns on verbose and
diffstat mode at the same time.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit converts the equivalent part of the shell script
`git-legacy-rebase.sh` to run the pre-rebase hook (unless disabled), and
to interrupt the rebase with error if the hook fails.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit implements support for an --onto argument that is actually a
"symmetric range" i.e. `<rev1>...<rev2>`.
The equivalent shell script version of the code offers two different
error messages for the cases where there is no merge base vs more than
one merge base.
Though it would be nice to retain this distinction, dropping it makes it
possible to simply use the `get_oid_mb()` function. Besides, it happens
rarely in real-world scenarios.
Therefore, in the interest of keeping the code less complex, let's just
use that function, and live with an error message that does not
distinguish between those two error conditions.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--onto` option is important, as it allows to rebase a range of
commits onto a different base commit (which gave the command its odd
name: "rebase").
This commit introduces options parsing so that different options can
be added in future commits.
Note: As this commit introduces to the parse_options() call (which
"eats" argv[0]), the argc is now expected to be lower by one after this
patch, compared to before this patch: argv[0] no longer refers to the
command name, but to the first (non-option) command-line parameter.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch gives life to the skeleton added in the previous patches:
With this change, we can perform a elementary rebase (without any
options).
It can be tested thusly by:
git -c rebase.usebuiltin=true rebase HEAD~2
The rebase backends (i.e. the shell script functions defined in
`git-rebase--<backend>`) are still at work here and the "builtin
rebase"'s purpose is simply to parse the options and set
everything up so that those rebase backends can do their work.
Note: We take an alternative approach here which is *not* to set the
environment variables via `run_command_v_opt_cd_env()` because those
variables would then be visible by processes spawned from the rebase
backends. Instead, we work hard to set them in the shell script snippet.
On Windows, some of the tests fail merely due to core.fileMode not
being heeded that's why the core.*config variables is parsed here.
The `reset_head()` function is currently only used to detach the HEAD
to onto by way of starting the rebase, but it offers additional
functionality that subsequent patches will need like moving to the
original branch (possibly updating it) and also to do the equivalent of
`git reset --hard`.
The next commits will handle and support all the wonderful rebase
options.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit imitates the strategy that was used to convert the
difftool to a builtin. We start by renaming the shell script
`git-rebase.sh` to `git-legacy-rebase.sh` and introduce a
`builtin/rebase.c` that simply executes the shell script version,
unless the config setting `rebase.useBuiltin` is set to `true`.
The motivation behind this is to rewrite all the functionality of the
shell script version in the aforementioned `rebase.c`, one by one and
be able to conveniently test new features by configuring
`rebase.useBuiltin`.
In the original difftool conversion, if sane_execvp() that attempts to
run the legacy scripted version returned with non-negative status, the
command silently exited without doing anything with success, but
sane_execvp() should not return with non-negative status in the first
place, so we use die() to notice such an abnormal case.
We intentionally avoid reading the config directly to avoid
messing up the GIT_* environment variables when we need to fall back to
exec()ing the shell script. The test of builtin rebase can be done by
`git -c rebase.useBuiltin=true rebase ...`
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
