Commit graph

78 commits

Author SHA1 Message Date
John Cai
10dae78533 t7201-co: modernize test format
Some tests still use the old format with four spaces indentation.
Standardize the tests to the new format with tab indentation.

Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-05-23 12:54:28 +09:00
Josh Steadmon
d3115660b4 branch: add flags and config to inherit tracking
It can be helpful when creating a new branch to use the existing
tracking configuration from the branch point. However, there is
currently not a method to automatically do so.

Teach git-{branch,checkout,switch} an "inherit" argument to the
"--track" option. When this is set, creating a new branch will cause the
tracking configuration to default to the configuration of the branch
point, if set.

For example, if branch "main" tracks "origin/main", and we run
`git checkout --track=inherit -b feature main`, then branch "feature"
will track "origin/main". Thus, `git status` will show us how far
ahead/behind we are from origin, and `git pull` will pull from origin.

This is particularly useful when creating branches across many
submodules, such as with `git submodule foreach ...` (or if running with
a patch such as [1], which we use at $job), as it avoids having to
manually set tracking info for each submodule.

Since we've added an argument to "--track", also add "--track=direct" as
another way to explicitly get the original "--track" behavior ("--track"
without an argument still works as well).

Finally, teach branch.autoSetupMerge a new "inherit" option. When this
is set, "--track=inherit" becomes the default behavior.

[1]: https://lore.kernel.org/git/20180927221603.148025-1-sbeller@google.com/

Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-12-20 22:40:21 -08:00
Elijah Newren
f222bd34ff tests: remove leftover untracked files
Remove untracked files that are unwanted after they are done being used.

While the set of cases in this patch is certainly far from
comprehensive, it was motivated by some work to see what the fallout
would be if we were to make the removal of untracked files as a side
effect of other commands into an error.  Some cases were a bit more
involved than the testcase changes included in this patch, but the ones
included here represent the simple cases.  While this patch is not that
important since we are not changing the behavior of those other commands
into an error in the near term, I thought these changes were useful
anyway as an explicit documentation of the intent that these untracked
files are no longer useful.

Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-12 16:42:40 -07:00
Junio C Hamano
466f94ec45 Merge branch 'ab/detox-gettext-tests'
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.

* ab/detox-gettext-tests:
  tests: remove uses of GIT_TEST_GETTEXT_POISON=false
  tests: remove support for GIT_TEST_GETTEXT_POISON
  ci: remove GETTEXT_POISON jobs
2021-02-10 14:48:33 -08:00
Ævar Arnfjörð Bjarmason
73c01d25fe tests: remove uses of GIT_TEST_GETTEXT_POISON=false
As noted in previous commits we are removing the use of
GIT_TEST_GETTEXT_POISON=false. These tests all relied on the facility
being off, it always is off after an earlier change, but we hadn't
removed the redundant assignments to "false" in the tests.

I'm preserving the deletion of "error" lines in 38b9197a76 (t5411:
add basic test cases for proc-receive hook, 2020-08-27), it turns out
that's useful even without GIT_TEST_GETTEXT_POISON=true in
play. Update a comment added in that commit to note that.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-01-21 15:50:03 -08:00
Johannes Schindelin
01dc81336d t7[0-4]*: adjust the references to the default branch name "main"
Carefully excluding t7064, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t7[0-4]*. This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t7[0-4]*.sh &&
	   git checkout HEAD -- t7064\*)

This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 15:44:18 -08:00
Johannes Schindelin
334afbc76f tests: mark tests relying on the current default for init.defaultBranch
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.

To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in

- all test scripts that contain the keyword `master`,

- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
  initialize the default branch,

- t5560 because it sources `t/t556x_common` which uses `master`,

- t8002 and t8012 because both source `t/annotate-tests.sh` which also
  uses `master`)

This trick was performed by this command:

	$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
	' $(git grep -l master t/t[0-9]*.sh) \
	t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh

After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:

	$ git checkout HEAD -- \
		t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
		t/t1011-read-tree-sparse-checkout.sh \
		t/t1305-config-include.sh t/t1309-early-config.sh \
		t/t1402-check-ref-format.sh t/t1450-fsck.sh \
		t/t2024-checkout-dwim.sh \
		t/t2106-update-index-assume-unchanged.sh \
		t/t3040-subprojects-basic.sh t/t3301-notes.sh \
		t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
		t/t3436-rebase-more-options.sh \
		t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
		t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
		t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
		t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
		t/t5548-push-porcelain.sh \
		t/t5552-skipping-fetch-negotiator.sh \
		t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
		t/t5614-clone-submodules-shallow.sh \
		t/t7508-status.sh t/t7606-merge-custom.sh \
		t/t9302-fast-import-unpack-limit.sh

We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:

	$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
	' t/t980[0167]*.sh t/t9811*.sh

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 15:44:17 -08:00
Charvi Mendiratta
1c0ab5c7fa t7201: put each command on a separate line
Modern practice is to avoid multiple commands per line,
and instead place each command on its own line.

Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-22 10:37:57 -07:00
Charvi Mendiratta
627f2d79de t7201: use 'git -C' to avoid subshell
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-22 10:37:57 -07:00
Charvi Mendiratta
c327762f81 t7102,t7201: remove whitespace after redirect operator
According to Documentation/CodingGuidelines, redirect
operator is written with space before, but no space
after them.

Let's remove these whitespaces after redirect operators.

Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-22 10:37:54 -07:00
Charvi Mendiratta
78b8d9340d t7102,t7201: remove unnecessary blank spaces in test body
t7102 and t7201 still follow the old style of having blank
lines around test body, which is not consistence with our
current practice.

Let's remove those unnecessary blank lines.

Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-20 13:21:43 -07:00
Charvi Mendiratta
e166fe363d t7101,t7102,t7201: modernize test formatting
Some tests in these scripts are formatted using a very old style:
        test_expect_success \
            'title' \
            'body line 1 &&
             body line 2'

Updating the formatting to the modern style:
        test_expect_success 'title' '
            body line 1 &&
            body line 2
        '

Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-20 13:21:43 -07:00
brian m. carlson
d482c234bf t7201: abstract away SHA-1-specific constants
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-30 09:16:46 -07:00
Ævar Arnfjörð Bjarmason
1ff750b128 tests: make GIT_TEST_GETTEXT_POISON a boolean
Change the GIT_TEST_GETTEXT_POISON variable from being "non-empty?" to
being a more standard boolean variable.

Since it needed to be checked in both C code and shellscript (via test
-n) it was one of the remaining shellscript-like variables. Now that
we have "env--helper" we can change that.

There's a couple of tricky edge cases that arise because we're using
git_env_bool() early, and the config-reading "env--helper".

If GIT_TEST_GETTEXT_POISON is set to an invalid value die_bad_number()
will die, but to do so it would usually call gettext(). Let's detect
the special case of GIT_TEST_GETTEXT_POISON and always emit that
message in the C locale, lest we infinitely loop.

As seen in the updated tests in t0017-env-helper.sh there's also a
caveat related to "env--helper" needing to read the config for trace2
purposes.

Since the C_LOCALE_OUTPUT prerequisite is lazy and relies on
"env--helper" we could get invalid results if we failed to read the
config (e.g. because we'd loop on includes) when combined with
e.g. "test_i18ngrep" wanting to check with "env--helper" if
GIT_TEST_GETTEXT_POISON was true or not.

I'm crossing my fingers and hoping that a test similar to the one I
removed in the earlier "config tests: simplify include cycle test"
change in this series won't happen again, and testing for this
explicitly in "env--helper"'s own tests.

This change breaks existing uses of
e.g. GIT_TEST_GETTEXT_POISON=YesPlease, which we've documented in
po/README and other places. As noted in [1] we might want to consider
also accepting "YesPlease" in "env--helper" as a special-case.

But as the lack of uproar over 6cdccfce1e ("i18n: make GETTEXT_POISON
a runtime option", 2018-11-08) demonstrates the audience for this
option is a really narrow set of git developers, who shouldn't have
much trouble modifying their test scripts, so I think it's better to
deal with that minor headache now and make all the relevant GIT_TEST_*
variables boolean in the same way than carry the "YesPlease"
special-case forward.

1. https://public-inbox.org/git/xmqqtvckm3h8.fsf@gitster-ct.c.googlers.com/

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-21 09:42:49 -07:00
Nguyễn Thái Ngọc Duy
6eff409e8a checkout: prevent losing staged changes with --merge
When --merge is specified, we may need to do a real merge (instead of
three-way tree unpacking), the steps are best seen in git-checkout.sh
version before it's removed:

    # Match the index to the working tree, and do a three-way.
    git diff-files --name-only | git update-index --remove --stdin &&
    work=`git write-tree` &&
    git read-tree $v --reset -u $new || exit

    git merge-recursive $old -- $new $work

    # Do not register the cleanly merged paths in the index yet.
    # this is not a real merge before committing, but just carrying
    # the working tree changes along.
    unmerged=`git ls-files -u`
    git read-tree $v --reset $new
    case "$unmerged" in
    '')     ;;
    *)
            (
                    z40=0000000000000000000000000000000000000000
                    echo "$unmerged" |
                    sed -e 's/^[0-7]* [0-9a-f]* /'"0 $z40 /"
                    echo "$unmerged"
            ) | git update-index --index-info
            ;;
    esac

Notice the last 'read-tree --reset' step. We restore worktree back to
'new' tree after worktree's messed up by merge-recursive. If there are
staged changes before this whole command sequence is executed, they
are lost because they are unlikely part of the 'new' tree to be
restored.

There is no easy way to fix this. Elijah may have something up his
sleeves [1], but until then, check if there are staged changes and
refuse to run and lose them. The user would need to do "git reset" to
continue in this case.

A note about the test update. 'checkout -m' in that test will fail
because a deletion is staged. This 'checkout -m' was previously needed
to verify quietness behavior of unpack-trees. But a different check
has been put in place in the last patch. We can safely drop
'checkout -m' now.

[1] CABPp-BFoL_U=bzON4SEMaQSKU2TKwnOgNqjt5MUaOejTKGUJxw@mail.gmail.com

Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-24 21:35:34 +09:00
Nguyễn Thái Ngọc Duy
3e41485d85 read-tree: add --quiet
read-tree is basically the front end of unpack-trees code and shoud
expose all of its functionality (unless it's designed for internal
use). This "opts.quiet" (formerly "opts.gently") was added for
builtin/checkout.c but there is no reason why other read-tree users
won't find this useful.

The test that is updated to run 'read-tree --quiet' was added because
unpack-trees was accidentally not being quiet [1] in 6a143aa2b2
(checkout -m: attempt merge when deletion of path was staged -
2014-08-12). Because checkout is the only "opts.quiet" user, there was
no other way to test quiet behavior. But we can now test it directly.

6a143aa2b2 was manually reverted to verify that read-tree --quiet
works correctly (i.e. test_must_be_empty fails).

[1] the commit message there say "errors out instead of performing a
    merge" but I'm pretty sure the "performing a merge" happens anyway
    even before that commit. That line should say "errors out
    _in addition to_ performing a merge"

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-24 21:35:34 +09:00
Ævar Arnfjörð Bjarmason
6cdccfce1e i18n: make GETTEXT_POISON a runtime option
Change the GETTEXT_POISON compile-time + runtime GIT_GETTEXT_POISON
test parameter to only be a GIT_TEST_GETTEXT_POISON=<non-empty?>
runtime parameter, to be consistent with other parameters documented
in "Running tests with special setups" in t/README.

When I added GETTEXT_POISON in bb946bba76 ("i18n: add GETTEXT_POISON
to simulate unfriendly translator", 2011-02-22) I was concerned with
ensuring that the _() function would get constant folded if NO_GETTEXT
was defined, and likewise that GETTEXT_POISON would be compiled out
unless it was defined.

But as the benchmark in my [1] shows doing a one-off runtime
getenv("GIT_TEST_[...]") is trivial, and since GETTEXT_POISON was
originally added the GIT_TEST_* env variables have become the common
idiom for turning on special test setups.

So change GETTEXT_POISON to work the same way. Now the
GETTEXT_POISON=YesPlease compile-time option is gone, and running the
tests with GIT_TEST_GETTEXT_POISON=[YesPlease|] can be toggled on/off
without recompiling.

This allows for conditionally amending tests to test with/without
poison, similar to what 859fdc0c3c ("commit-graph: define
GIT_TEST_COMMIT_GRAPH", 2018-08-29) did for GIT_TEST_COMMIT_GRAPH. Do
some of that, now we e.g. always run the t0205-gettext-poison.sh test.

I did enough there to remove the GETTEXT_POISON prerequisite, but its
inverse C_LOCALE_OUTPUT is still around, and surely some tests using
it can be converted to e.g. always set GIT_TEST_GETTEXT_POISON=.

Notes on the implementation:

 * We still compile a dedicated GETTEXT_POISON build in Travis
   CI. Perhaps this should be revisited and integrated into the
   "linux-gcc" build, see ae59a4e44f ("travis: run tests with
   GIT_TEST_SPLIT_INDEX", 2018-01-07) for prior art in that area. Then
   again maybe not, see [2].

 * We now skip a test in t0000-basic.sh under
   GIT_TEST_GETTEXT_POISON=YesPlease that wasn't skipped before. This
   test relies on C locale output, but due to an edge case in how the
   previous implementation of GETTEXT_POISON worked (reading it from
   GIT-BUILD-OPTIONS) wasn't enabling poison correctly. Now it does,
   and needs to be skipped.

 * The getenv() function is not reentrant, so out of paranoia about
   code of the form:

       printf(_("%s"), getenv("some-env"));

   call use_gettext_poison() in our early setup in git_setup_gettext()
   so we populate the "poison_requested" variable in a codepath that's
   won't suffer from that race condition.

 * We error out in the Makefile if you're still saying
   GETTEXT_POISON=YesPlease to prompt users to change their
   invocation.

 * We should not print out poisoned messages during the test
   initialization itself to keep it more readable, so the test library
   hides the variable if set in $GIT_TEST_GETTEXT_POISON_ORIG during
   setup. See [3].

See also [4] for more on the motivation behind this patch, and the
history of the GETTEXT_POISON facility.

1. https://public-inbox.org/git/871s8gd32p.fsf@evledraar.gmail.com/
2. https://public-inbox.org/git/20181102163725.GY30222@szeder.dev/
3. https://public-inbox.org/git/20181022202241.18629-2-szeder.dev@gmail.com/
4. https://public-inbox.org/git/878t2pd6yu.fsf@evledraar.gmail.com/

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-09 11:25:19 +09:00
Matthew DeVore
dcbaa0b361 t/*: fix ordering of expected/observed arguments
Fix various places where the ordering was obviously wrong, meaning it
was easy to find with grep.

Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-07 08:51:18 +09:00
Junio C Hamano
986c518107 Merge branch 'sg/test-must-be-empty'
Test fixes.

* sg/test-must-be-empty:
  tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
  tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
  tests: use 'test_must_be_empty' instead of 'test ! -s'
  tests: use 'test_must_be_empty' instead of '! test -s'
2018-08-27 14:33:43 -07:00
SZEDER Gábor
1c5e94f459 tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
Using 'test_must_be_empty' is shorter and more idiomatic than

  >empty &&
  test_cmp empty out

as it saves the creation of an empty file.  Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).

These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.

Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:

  - Sometimes the expected output is not hard-coded in the test, but
    'test_cmp' is used to ensure that two similar git commands produce
    the same output, and that output happens to be empty, e.g. the
    test 'submodule update --merge  - ignores --merge  for new
    submodules' in 't7406-submodule-update.sh'.

  - Repetitive common tasks, including preparing the expected results
    and running 'test_cmp', are often extracted into a helper
    function, and some of this helper's callsites expect no output.

  - For the same reason as above, the whole 'test_expect_success'
    block is within a helper function, e.g. in 't3070-wildmatch.sh'.

  - Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
    (-p)' in 't9400-git-cvsserver-server.sh'.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-21 11:48:36 -07:00
SZEDER Gábor
ec10b018e7 tests: use 'test_must_be_empty' instead of '! test -s'
Using 'test_must_be_empty' is preferable to '! test -s', because it
gives a helpful error message if the given file is unexpectedly not
empty, while the latter remains completely silent.  Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.

This patch was basically created by:

  sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh

with the following notable exceptions:

  - The '! test -s' check in '.gitmodules ignore=dirty suppresses
    submodules with untracked content' in 't7508-status.sh' is left
    as-is, because it's bogus and, therefore, it's subject of a
    dedicated patch.

  - The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and
    't9135-git-svn-moved-branch-empty-file.sh' are immediately
    preceeded by a 'test -f' to ensure that the files exist in the
    first place.  'test_must_be_empty' ensures that as well, so those
    'test -f' commands are removed as well.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-21 11:48:29 -07:00
Eric Sunshine
e974e06de0 t7000-t7999: fix broken &&-chains
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-16 14:38:47 -07:00
Eric Sunshine
e7eb15faca t7201: drop pointless "exit 0" at end of subshell
This test employs a for-loop inside a subshell and correctly aborts the
loop and fails the test overall (via "exit 1") if any iteration of the
for-loop fails. Otherwise, it exits the subshell with an explicit but
entirely unnecessary "exit 0", presumably to indicate that all
iterations of the loop succeeded. The &&-chain is broken between the
for-loop and the "exit 0". Rather than fixing the &&-chain, just drop
the pointless "exit 0".

Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 12:38:05 -07:00
David Turner
cbc5cf7ce5 t: make many tests depend less on the refs being files
Many tests are very focused on the file system representation of the
loose and packed refs code. As there are plans to implement other
ref storage systems, let's migrate these tests to a form that test
the intent of the refs storage system instead of it internals.

This will make clear to readers that these tests do not depend on
which ref backend is used.

The internals of the loose refs backend are still tested in
t1400-update-ref.sh, whereas the tests changed in this patch focus
on testing other aspects.

This patch just takes care of many low hanging fruits. It does not
try to completely solves the issue.

Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-23 14:59:38 +09:00
Stefan Beller
9c5b2fab30 tests: fix diff order arguments in test_cmp
Fix the argument order for test_cmp. When given the expected
result first the diff shows the actual output with '+' and the
expectation with '-', which is the convention for our tests.

Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-07 10:56:08 +09:00
Vasco Almeida
e9f3cec494 i18n: advice: mark string about detached head for translation
Mark string with advice seen by the user when in detached head.

Update test t7201-co.sh to pass under GETTEXT_POISON build. Pretend
success if the number of lines of "git checkout renamer^" output is not
greater than 1 and test are running under GETTEXT_POISON.

Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17 15:45:47 -07:00
Jeff King
aef591a0f9 t7201: fix &&-chain breakage
One of these breakages is in setup, but one is more severe
and may miss a real test failure. These are pulled out from
the rest, though, because we also clean up a few other
anachronisms. The most interesting is the use of this
here-doc construct:

  (cat >... <<EOF
  ...
  EOF
  ) &&

It looks like an attempt to make the &&-chaining more
natural by letting it come at the end of the here-doc. But
the extra sub-shell is so non-idiomatic (plus the lack of
"<<-") that it ends up confusing.

Since these are just using a single line, we can accomplish
the same thing with a single printf (which also makes the
use of tab more obvious than the verbatim whitespace).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20 10:20:17 -07:00
Jeff King
a6a4a88af0 t: fix &&-chaining issues around setup which might fail
Many tests have an initial setup step that might fail based
on whether earlier tests in the script have succeeded or
not. Using a trick like "|| true" breaks the &&-chain,
missing earlier failures (and fooling --chain-lint).

We can use test_might_fail in some cases, which is correct
and makes the intent more obvious. We can also use
test_unconfig for unsetting config (and which is more
robust, as well).

The case in t9500 is an oddball. It wants to run cmd1 _or_
cmd2, and does it like:

  cmd1 || cmd2 &&
  other_stuff

It's not wrong in this case, but it's a bad habit to get
into, because it breaks the &&-chain if used anywhere except
at the beginning of the test (and we use the correct
solution here, putting it inside a block for precedence).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20 10:20:15 -07:00
Jonathan Nieder
6a143aa2b2 checkout -m: attempt merge when deletion of path was staged
twoway_merge() is missing an o->gently check in the case where a file
that needs to be modified is missing from the index but present in the
old and new trees.  As a result, in this case 'git checkout -m' errors
out instead of trying to perform a merge.

Fix it by checking o->gently.  While at it, inline the o->gently check
into reject_merge to prevent future call sites from making the same
mistake.

Noticed by code inspection.  The test for the motivating case was
added by JC.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-25 15:17:34 -07:00
Johan Herland
88a9f72fe0 t7201.24: Add refspec to keep --track working
We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.

Without this patch, this test would start failing when the new behavior is
introduced.

Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-21 15:14:41 -07:00
Stefano Lattarini
3fb0459bc8 tests: modernise style: more uses of test_line_count
Prefer:

  test_line_count <OP> COUNT FILE

over:

  test $(wc -l <FILE) <OP> COUNT

(or similar usages) in several tests.

Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-11 09:32:20 -07:00
Junio C Hamano
69382976aa i18n: use test_i18ngrep in t7201
Some test were mistakenly disabled under GETTEXT_POISON as well,
and they have been resurrected.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-13 15:52:47 -07:00
Junio C Hamano
6c80cd298a Merge branch 'ab/i18n-st'
* ab/i18n-st: (69 commits)
  i18n: git-shortlog basic messages
  i18n: git-revert split up "could not revert/apply" message
  i18n: git-revert literal "me" messages
  i18n: git-revert "Your local changes" message
  i18n: git-revert basic messages
  i18n: git-notes GIT_NOTES_REWRITE_MODE error message
  i18n: git-notes basic commands
  i18n: git-gc "Auto packing the repository" message
  i18n: git-gc basic messages
  i18n: git-describe basic messages
  i18n: git-clean clean.requireForce messages
  i18n: git-clean basic messages
  i18n: git-bundle basic messages
  i18n: git-archive basic messages
  i18n: git-status "renamed: " message
  i18n: git-status "Initial commit" message
  i18n: git-status "Changes to be committed" message
  i18n: git-status shortstatus messages
  i18n: git-status "nothing to commit" messages
  i18n: git-status basic messages
  ...

Conflicts:
	builtin/branch.c
	builtin/checkout.c
	builtin/clone.c
	builtin/commit.c
	builtin/grep.c
	builtin/merge.c
	builtin/push.c
	builtin/revert.c
	t/t3507-cherry-pick-conflict.sh
	t/t7607-merge-overwrite.sh
2011-04-01 17:55:55 -07:00
Ævar Arnfjörð Bjarmason
9398cc4bd4 i18n: git-checkout "HEAD is now at" message
Gettextize the "HEAD is now at" messages. Several tests in t7201-co.sh
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09 23:52:53 -08:00
Johan Herland
21b5b1e8dc branch/checkout --track: Ensure that upstream branch is indeed a branch
When creating a new branch using the --track option, we must make sure that
we don't try to set an upstream that does not make sense to follow (using
'git pull') or update (using 'git push'). The current code checks against
using HEAD as upstream (since tracking a symref doesn't make sense). However,
tracking a tag doesn't make sense either. Indeed, tracking _any_ ref that is
not a (local or remote) branch doesn't make sense, and should be disallowed.

This patch achieves this by checking that the ref we're trying to --track
resides within refs/heads/* or refs/remotes/*. This new check replaces the
previous check against HEAD.

A couple of testcases are also added, verifying that we cannot create
branches with tags as upstreams.

Finally, some selftests relying on using a non-branch as an upstream have
been reworked or removed:

- t6040: Reverse the meaning of two tests that depend on the ability to
use (lightweight and annotated) tags as upstreams. These two tests were
originally added in commits 1be570f and 57ffc5f, and this patch reverts the
intention of those two commits.

- t7201: Remove part of a test (introduced in 9188ed8) relying on a
non-branch as upstream.

Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-16 16:55:56 -08:00
Jonathan Nieder
c4151629e7 checkout -m --conflict=diff3: add a label for ancestor
git checkout --merge --conflict=diff3 can be used to present conflict
hunks including text from the common ancestor.  The added information
is helpful for resolving a merge by hand, and merge tools tend to
understand it because it is very similar to what ‘diff3 -m’ produces.

Unlike current git, diff3 -m includes a label for the merge base on
the ||||||| line, and unfortunately, some tools cannot parse the
conflict hunks without it.  Humans can benefit from a cue when
learning to interpreting the format, too.  Mark the start of the text
from the old branch with a label based on the branch’s name.

git rerere does not have trouble parsing this output and its preimage
ids are unchanged since it includes its own code for recreating
conflict hunks.  No other code in git tries to parse conflict hunks.

Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20 20:36:11 -07:00
Jonathan Nieder
f0531a2937 checkout --conflict=diff3: add a label for ancestor
git checkout --conflict=diff3 can be used to present conflicts hunks
including text from the common ancestor:

	<<<<<<< ours
	ourside
	|||||||
	original
	=======
	theirside
	>>>>>>> theirs

The added information is helpful for resolving a merge by hand, and
merge tools can usually understand it without trouble because it looks
like output from ‘diff3 -m’.

diff3 includes a label for the merge base on the ||||||| line, and it
seems some tools (for example, Emacs 22’s smerge-mode) cannot parse
conflict hunks without such a label.  Humans could use help in
interpreting the output, too.  So change the marker for the start of the
text from the common ancestor to include the label “base”.

git rerere’s conflict identifiers are not affected: to parse conflict
hunks, rerere looks for whitespace after the ||||||| marker rather
than a newline, and to compute preimage ids, rerere has its own code
for creating conflict hunks.  No other code in git tries to parse
conflict hunks.

Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20 20:36:11 -07:00
Jonathan Nieder
47349a8cc0 tests: document format of conflicts from checkout -m
We are about to change the format of the conflict hunks that ‘checkout
--merge’ writes.  Add tests checking the current behavior first.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20 20:36:10 -07:00
Junio C Hamano
13be3e31f1 Reword "detached HEAD" notification
The old "advice" message explained how to create a branch after going into
a detached HEAD state but didn't make it clear why the user may want to do
so.  Also "moving to ... which isn't a local branch" was unclear if it is
complaining, if it is describing the new state, or if it is explaining why
the HEAD is detached (the true reason is the last one).

Give the established phrase 'detached HEAD' first to make it easy for
users to look up the concept in documentation, and briefly describe what
can be done in the state (i.e. play around without having to clean up)
before telling the user how to keep what was done during the temporary
state.

Allow the long description to be hidden by setting advice.detachedHead
configuration to false.

We might want to customize the advice depending on how the commit to check
out was spelled (e.g. instead of "new-branch-name", we way want to say
"topic" when "git checkout origin/topic" triggered this message) in later
updates, but this encapsulates that into a separate function and it should
be a good first step.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-29 22:11:00 -08:00
Junio C Hamano
a0db3e5878 Merge branch 'jc/maint-1.6.1-checkout-m-custom-merge'
* jc/maint-1.6.1-checkout-m-custom-merge:
  checkout -m path: fix recreating conflicts

Conflicts:
	t/t7201-co.sh
2010-01-17 15:59:40 -08:00
Junio C Hamano
6d6f9acc5d checkout -m path: fix recreating conflicts
We should tell ll_merge() that the 3-way merge between stages #2 and #3 is
an outermost merge, not a virtual-ancestor creation.

Back when this code was originally written, users couldn't write custom
merge drivers easily, so the bug didn't matter, but these days it does.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-06 13:49:41 -08:00
Nanako Shiraishi
e4b09dad9f test: checkout shouldn't say that HEAD has moved if it didn't
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-16 19:49:25 -07:00
Jari Aalto
714fddf2fc Change double quotes to single quotes in message
Most of the time when we give branch name in the message, we quote it
inside a pair of single-quotes.  git-checkout uses double-quotes; this
patch corrects the inconsistency.

Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-07 23:04:45 -07:00
Junio C Hamano
a157400c97 Merge branch 'jc/maint-co-track'
* jc/maint-co-track:
  Enhance hold_lock_file_for_{update,append}() API
  demonstrate breakage of detached checkout with symbolic link HEAD
  Fix "checkout --track -b newbranch" on detached HEAD

Conflicts:
	builtin-commit.c
2008-10-21 17:58:11 -07:00
Junio C Hamano
acd3b9eca8 Enhance hold_lock_file_for_{update,append}() API
This changes the "die_on_error" boolean parameter to a mere "flags", and
changes the existing callers of hold_lock_file_for_update/append()
functions to pass LOCK_DIE_ON_ERROR.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-19 12:35:37 -07:00
Junio C Hamano
f5637549a7 demonstrate breakage of detached checkout with symbolic link HEAD
When core.prefersymlinkrefs is in use, detaching the HEAD by
checkout incorrectly clobbers the tip of the current branch.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-19 12:35:04 -07:00
Junio C Hamano
51a94af845 Fix "checkout --track -b newbranch" on detached HEAD
The test to make sure that checkout fails when --track was asked for and
we cannot set up tracking information in t7201 was wrong, and it turns out
that the implementation for that feature itself was buggy.  This fixes it.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-17 14:35:06 -07:00
Shawn O. Pearce
9ba929ed65 Merge branch 'jc/better-conflict-resolution'
* jc/better-conflict-resolution:
  Fix AsciiDoc errors in merge documentation
  git-merge documentation: describe how conflict is presented
  checkout --conflict=<style>: recreate merge in a non-default style
  checkout -m: recreate merge when checking out of unmerged index
  git-merge-recursive: learn to honor merge.conflictstyle
  merge.conflictstyle: choose between "merge" and "diff3 -m" styles
  rerere: understand "diff3 -m" style conflicts with the original
  rerere.c: use symbolic constants to keep track of parsing states
  xmerge.c: "diff3 -m" style clips merge reduction level to EAGER or less
  xmerge.c: minimum readability fixups
  xdiff-merge: optionally show conflicts in "diff3 -m" style
  xdl_fill_merge_buffer(): separate out a too deeply nested function
  checkout --ours/--theirs: allow checking out one side of a conflicting merge
  checkout -f: allow ignoring unmerged paths when checking out of the index

Conflicts:
	Documentation/git-checkout.txt
	builtin-checkout.c
	builtin-merge-recursive.c
	t/t7201-co.sh
2008-09-29 10:15:07 -07:00
Junio C Hamano
666599d798 Merge branch 'db/maint-checkout-b'
* db/maint-checkout-b:
  Check early that a new branch is new and valid
2008-09-21 23:50:05 -07:00
Daniel Barkalow
352eadc400 Check early that a new branch is new and valid
If you fail to update refs to change branches in checkout, your index
and working tree are left already updated. We don't have an easy way
to undo this, but at least we can check things that would make the
creation of a new branch fail. These checks were in the shell version,
and were lost in the C conversion.

The messages are from the shell version, and should probably be made nicer.

[jc: added test to t7201]

Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-21 23:17:06 -07:00