"git diff --relative" did not mix well with "git diff --ext-diff",
which has been corrected.
* jk/ext-diff-with-relative:
diff: drop "name" parameter from prepare_temp_file()
diff: clean up external-diff argv setup
diff: use filespec path to set up tempfiles for ext-diff
When we're going to run an external diff, we have to make the contents
of the pre- and post-images available either by dumping them to a
tempfile, or by pointing at a valid file in the worktree. The logic of
this is all handled by prepare_temp_file(), and we just pass in the
filename and the diff_filespec.
But there's a gotcha here. The "filename" we have is a logical filename
and not necessarily a path on disk or in the repository. This matters in
at least one case: when using "--relative", we may have a name like
"foo", even though the file content is found at "subdir/foo". As a
result, we look for the wrong path, fail to find "foo", and claim that
the file has been deleted (passing "/dev/null" to the external diff,
rather than the correct worktree path).
We can fix this by passing the pathname from the diff_filespec, which
should always be a full repository path (and that's what we want even if
reusing a worktree file, since we're always operating from the top-level
of the working tree).
The breakage seems to go all the way back to cd676a5136 (diff
--relative: output paths as relative to the current subdirectory,
2008-02-12). As far as I can tell, before then "name" would always have
been the same as the filespec's "path".
There are two related cases I looked at that aren't buggy:
1. the only other caller of prepare_temp_file() is run_textconv(). But
it always passes the filespec's path field, so it's OK.
2. I wondered if file renames/copies might cause similar confusion.
But they don't, because run_external_diff() receives two names in
that case: "name" and "other", which correspond to the two sides of
the diff. And we did correctly pass "other" when handling the
post-image side. Barring the use of "--relative", that would always
match "two->path", the path of the second filespec (and the rename
destination).
So the only bug is just the interaction with external diff drivers and
--relative.
Reported-by: Carl Baldwin <carl@ecbaldwin.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The read_cache() in prepare_to_commit() would end up clobbering the
pointer we had for a previously populated "the_index.cache_tree" in
the very common case of "git commit" stressed by e.g. the tests being
changed here.
We'd populate "the_index.cache_tree" by calling
"update_main_cache_tree" in prepare_index(), but would not end up with
a "fully prepared" index. What constitutes an existing index is
clearly overly fuzzy, here we'll check "active_nr" (aka
"the_index.cache_nr"), but our "the_index.cache_tree" might have been
malloc()'d already.
Thus the code added in 11c8a74a64 (commit: write cache-tree data when
writing index anyway, 2011-12-06) would end up allocating the
"cache_tree", and would interact here with code added in
7168624c35 (Do not generate full commit log message if it is not
going to be used, 2007-11-28). The result was a very common memory
leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
"git diff --relative" segfaulted and/or produced incorrect result
when there are unmerged paths.
* dd/diff-files-unmerged-fix:
diff-lib: ignore paths that are outside $cwd if --relative asked
For diff family commands, we can tell them to exclude changes outside
of some directories if --relative is requested.
In diff_unmerge(), NULL will be returned if the requested path is
outside of the interesting directories, thus we'll run into NULL
pointer dereference in run_diff_files when trying to dereference
its return value.
Checking for return value of diff_unmerge before dereferencing
is not sufficient, though. Since, diff engine will try to work on such
pathspec later.
Let's not run diff on those unintesting entries, instead.
As a side effect, by skipping like that, we can save some CPU cycles.
Reported-by: Thomas De Zeeuw <thomas@slight.dev>
Tested-by: Carlo Arenas <carenas@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `diff.relative` boolean option set to `true` shows only changes in
the current directory/value specified by the `path` argument of the
`relative` option and shows pathnames relative to the aforementioned
directory.
Teach `--no-relative` to override earlier `--relative`
Add for git-format-patch(1) options documentation `--relative` and
`--no-relative`
Signed-off-by: Laurent Arnoud <laurent@spkdev.net>
Acked-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a hard-coded all-zeros object ID with a use of $ZERO_OID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have tests for --relative, but they currently only test when
a prefix has been provided. This fails to test the case where --relative
by itself should use the current directory as the prefix.
Teach the check_$type functions to take a directory argument to indicate
which subdirectory to run the git commands in. Add a new test which uses
this to test --relative without a prefix value.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These changes are in the same spirit as the six patches that
precede them, but they haven't been split into individually
justifiable patches yet.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two ways a user might want to use "diff --relative":
1. For a file in a directory, like "subdir/file", the user
can use "--relative=subdir/" to strip the directory.
2. To strip part of a filename, like "foo-10", they can
use "--relative=foo-".
We currently handle both of those situations. However, if the user passes
"--relative=subdir" (without the trailing slash), we produce inconsistent
results. For the unified diff format, we collapse the double-slash of
"a//file" correctly into "a/file". But for other formats (raw, stat,
name-status), we end up with "/file".
We can do what the user means here and strip the extra "/" (and only a
slash). We are not hurting any existing users of (2) above with this
behavior change because the existing output for this case was nonsensical.
Patch by Jakub, tests and commit message by Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
