Internally we call the underscore version of relative_path, but externally
we present an API with no underscores.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule--helper update-clone' has logic to retry failed clones
a second time. For this purpose, there is a list of submodules to clone,
and a second list that is filled with the submodules to retry. Within
these lists, the submodules are identified by an index as if both lists
were just appended.
This works nicely except when the second clone attempt fails as well. To
report an error, the identifying index must be adjusted by an offset so
that it can be used as an index into the second list. However, the
calculation uses the logical total length of the lists so that the result
always points one past the end of the second list.
Pick the correct index.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update" that drives many "git clone" could
eventually hit flaky servers/network conditions on one of the
submodules; the command learned to retry the attempt.
* sb/submodule-clone-retry:
submodule update: continue when a clone fails
submodule--helper: initial clone learns retry logic
An upstream project can make a recommendation to shallowly clone
some submodules in the .gitmodules file it ships.
* sb/submodule-recommend-shallowness:
submodule update: learn `--[no-]recommend-shallow` option
submodule-config: keep shallow recommendation around
Each submodule that is attempted to be cloned, will be retried once in
case of failure after all other submodules were cloned. This helps to
mitigate ephemeral server failures and increases chances of a reliable
clone of a repo with hundreds of submodules immensely.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio pointed out `relative_path` was using bashisms via the
local variables. As the longer term goal is to rewrite most of the
submodule code in C, do it now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 48308681 (2016-02-29, git submodule update: have a dedicated helper
for cloning), the helper communicated errors back only via exit code,
and dance with printing '#unmatched' in case of error was left to
git-submodule.sh as it uses the output of the helper and pipes it into
shell commands. This change makes the helper consistent by never
printing '#unmatched' in the helper but always handling these piping
issues in the actual shell script.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes the history of a submodule is not considered important by
the projects upstream. To make it easier for downstream users, allow
a boolean field 'submodule.<name>.shallow' in .gitmodules, which can
be used to recommend whether upstream considers the history important.
This field is honored in the initial clone by default, it can be
ignored by giving the `--no-recommend-shallow` option.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier addition of "sanitize_submodule_env" with 14111fc4 (git:
submodule honor -c credential.* from command line, 2016-02-29)
turned out to be a convoluted no-op; implement what it wanted to do
correctly, and stop filtering settings given via "git -c var=val".
* jk/submodule-c-credential:
submodule: stop sanitizing config options
submodule: use prepare_submodule_repo_env consistently
submodule--helper: move config-sanitizing to submodule.c
submodule: export sanitized GIT_CONFIG_PARAMETERS
t5550: break submodule config test into multiple sub-tests
t5550: fix typo in $HTTPD_URL
Update of "git submodule" to move pieces of logic to C continues.
* sb/submodule-init:
submodule init: redirect stdout to stderr
submodule--helper update-clone: abort gracefully on missing .gitmodules
submodule init: fail gracefully with a missing .gitmodules file
submodule: port init from shell to C
submodule: port resolve_relative_url from shell to C
The point of having a whitelist of command-line config
options to pass to submodules was two-fold:
1. It prevented obvious nonsense like using core.worktree
for multiple repos.
2. It could prevent surprise when the user did not mean
for the options to leak to the submodules (e.g.,
http.sslverify=false).
For case 1, the answer is mostly "if it hurts, don't do
that". For case 2, we can note that any such example has a
matching inverted surprise (e.g., a user who meant
http.sslverify=true to apply everywhere, but it didn't).
So this whitelist is probably not giving us any benefit, and
is already creating a hassle as people propose things to put
on it. Let's just drop it entirely.
Note that we still need to keep a special code path for
"prepare the submodule environment", because we still have
to take care to pass through $GIT_CONFIG_PARAMETERS (and
block the rest of the repo-specific environment variables).
We can do this easily from within the submodule shell
script, which lets us drop the submodule--helper option
entirely (and it's OK to do so because as a "--" program, it
is entirely a private implementation detail).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reroute the output of stdout to stderr as it is just informative
messages, not to be consumed by machines.
This should not regress any scripts that try to parse the
current output, as the output is already internationalized
and therefore unstable.
We want to init submodules from the helper for `submodule update`
in a later patch and the stdout output of said helper is consumed
by the parts of `submodule update` which are still written in shell.
So we have to be careful which messages are on stdout.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is no .gitmodules file availabe to initialize a submodule
from, `submodule_from_path` just returns NULL. We need to check for
that and abort gracefully.
When `git submodule update` was implemented in shell, this error out
with the warning
Submodule path '%s' not initialized
Maybe you want to use 'update --init'?
Replicate that behavior for now instead of crashing.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is no .gitmodules file availabe to initialize a submodule
from, `submodule_from_path` just returns NULL. We need to check for
that and abort gracefully. When `submodule init` was implemented in shell,
a missing .gitmodules file would result in an error message
No url found for submodule path '%s' in .gitmodules
Replicate that error message for now.
When the .gitmodules file is missing we can probably fail even earlier
for all of the submodules with an improved error message.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions should be used by any code which spawns a
submodule process, which may happen in submodule.c (e.g.,
for spawning fetch). Let's move them there and make them
public so that submodule--helper can continue to use them.
Since they're now public, let's also provide a basic overview
of their intended use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A partial rewrite of "git submodule" in the 2.7 timeframe changed
the way the gitdir: pointer in the submodules point at the real
repository location to use absolute paths by accident. This has
been corrected.
* sb/submodule-helper-clone-regression-fix:
submodule--helper, module_clone: catch fprintf failure
submodule--helper: do not borrow absolute_path() result for too long
submodule--helper, module_clone: always operate on absolute paths
submodule--helper clone: create the submodule path just once
submodule--helper: fix potential NULL-dereference
recursive submodules: test for relative paths
By having the `submodule init` functionality in C, we can reference it
easier from other parts in the code in later patches. The code is split
up to have one function to initialize one submodule and a calling function
that takes care of the rest, such as argument handling and translating the
arguments to the paths of the submodules.
This is the first submodule subcommand that is fully converted to C
except for the usage string, so this is actually removing a call to
the `submodule--helper list` function, which is supposed to be used in
this transition. Instead we'll make a direct call to `module_list_compute`.
An explanation why we need to edit the prefixes in cmd_update in
git-submodule.sh in this patch:
By having no processing in the shell part, we need to convey the notion
of wt_prefix and prefix to the C parts, which former patches punted on
and did the processing of displaying path in the shell.
`wt_prefix` used to hold the path from the repository root to the current
directory, e.g. wt_prefix would be t/ if the user invoked the
`git submodule` command in ~/repo/t and ~repo is the GIT_DIR.
`prefix` used to hold the relative path from the repository root to the
operation, e.g. if you have recursive submodules, the shell script would
modify the `prefix` in each recursive step by adding the submodule path.
We will pass `wt_prefix` into the C helper via `git -C <dir>` as that
will setup git in the directory the user actually called git-submodule.sh
from. The `prefix` will be passed in via the `--prefix` option.
Having `prefix` and `wt_prefix` relative to the GIT_DIR of the
calling superproject is unfortunate with this patch as the C code doesn't
know about a possible recursion from a superproject via `submodule update
--init --recursive`.
To fix this, we change the meaning of `wt_prefix` to point to the current
project instead of the superproject and `prefix` to include any relative
paths issues in the superproject. That way `prefix` will become the leading
part for displaying paths and `wt_prefix` will be empty in recursive
calls for now.
The new notion of `wt_prefix` and `prefix` still allows us to reconstruct
the calling directory in the superproject by just traveling reverse of
`prefix`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Later on we want to automatically call `git submodule init` from
other commands, such that the users don't have to initialize the
submodule themselves. As these other commands are written in C
already, we'd need the init functionality in C, too. The
`resolve_relative_url` function is a large part of that init
functionality, so start by porting this function to C.
To create the tests in t0060, the function `resolve_relative_url`
was temporarily enhanced to write all inputs and output to disk
when running the test suite. The added tests in this patch are
a small selection thereof.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule" reports the paths of submodules the command
recurses into, but this was incorrect when the command was not run
from the root level of the superproject.
Any further comments? Otherwise will merge to 'next'.
* sb/submodule-path-misc-bugs: (600 commits)
t7407: make expectation as clear as possible
submodule update: test recursive path reporting from subdirectory
submodule update: align reporting path for custom command execution
submodule status: correct path handling in recursive submodules
submodule update --init: correct path handling in recursive submodules
submodule foreach: correct path display in recursive submodules
Git 2.8
Documentation: fix git-p4 AsciiDoc formatting
mingw: skip some tests in t9115 due to file name issues
t1300: fix the new --show-origin tests on Windows
t1300-repo-config: make it resilient to being run via 'sh -x'
config --show-origin: report paths with forward slashes
submodule: fix regression for deinit without submodules
l10n: pt_PT: Update and add new translations
l10n: ca.po: update translation
Git 2.8-rc4
Documentation: fix broken linkgit to git-config
Documentation: use ASCII quotation marks in git-p4
Revert "config.mak.uname: use clang for Mac OS X 10.6"
git-compat-util: st_add4: work around gcc 4.2.x compiler crash
...
* sb/submodule-helper-clone-regression-fix:
submodule--helper, module_clone: catch fprintf failure
submodule--helper: do not borrow absolute_path() result for too long
submodule--helper, module_clone: always operate on absolute paths
submodule--helper clone: create the submodule path just once
submodule--helper: fix potential NULL-dereference
recursive submodules: test for relative paths
"git -c credential.<var>=<value> submodule" can now be used to
propagate configuration variables related to credential helper
down to the submodules.
* jk/submodule-c-credential:
git_config_push_parameter: handle empty GIT_CONFIG_PARAMETERS
git: submodule honor -c credential.* from command line
quote: implement sq_quotef()
submodule: fix segmentation fault in submodule--helper clone
submodule: fix submodule--helper clone usage
submodule: check argc count for git submodule--helper clone
submodule: don't pass empty string arguments to submodule--helper clone
A major part of "git submodule update" has been ported to C to take
advantage of the recently added framework to run download tasks in
parallel.
* sb/submodule-parallel-update:
clone: allow an explicit argument for parallel submodule clones
submodule update: expose parallelism to the user
submodule helper: remove double 'fatal: ' prefix
git submodule update: have a dedicated helper for cloning
run_processes_parallel: rename parameters for the callbacks
run_processes_parallel: treat output of children as byte array
submodule update: direct error message to stderr
fetching submodules: respect `submodule.fetchJobs` config option
submodule-config: drop check against NULL
submodule-config: keep update strategy around
The return value of fprintf is unchecked, which may lead to
unreported errors. Use fprintf_or_die to report the error to the user.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
absolute_path() is designed to allow its callers to take a brief
peek of the result (typically, to be fed to functions like
strbuf_add() and relative_path() as a parameter) without having to
worry about freeing it, but the other side of the coin of that
memory model is that the caller shouldn't rely too much on the
result living forever--there may be a helper function the caller
subsequently calls that makes its own call to absolute_path(),
invalidating the earlier result.
Use xstrdup() to make our own copy, and free(3) it when we are done.
While at it, remove an unnecessary sm_gitdir_rel variable that was
only used to as a parameter to call absolute_path() and never used
again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When giving relative paths to `relative_path` to compute a relative path
from one directory to another, this may fail in `relative_path`.
Make sure both arguments to `relative_path` are always absolute.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We make sure that the parent directory of path exists (or create it
otherwise) and then do the same for path + "/.git".
That is equivalent to just making sure that the parent directory of
path + "/.git" exists (or create it otherwise).
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't dereference NULL 'path' if it was never assigned. Also
protect against an empty --path argument.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per Cederqvist wrote:
> It used to be possible to run
>
> git submodule deinit -f .
>
> to remove any submodules, no matter how many submodules you had. That
> is no longer possible in projects that don't have any submodules at
> all. The command will fail with:
>
> error: pathspec '.' did not match any file(s) known to git.
This regression was introduced in 74703a1e4d (submodule: rewrite
`module_list` shell function in C, 2015-09-02), as we changed the
order of checking in new module listing to first check whether it is
a gitlin before feeding it to match_pathspec(). It used to be that
a pathspec that does not match any path were diagnosed as an error,
but the new code complains for a pathspec that does not match any
submodule path.
Arguably the new behaviour may give us a better diagnosis, but that
is inconsistent with the suggestion "deinit" gives, and also this
was an unintended accident. The new behaviour hopefully can be
redesigned and implemented better in future releases, but for now,
switch these two checks to restore the same behavior as before. In
an empty repository, giving the pathspec '.' will still get the same
"did not match" error, but that is the same bug we had before 1.7.0.
Reported-by: Per Cederqvist <cederp@opera.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to the way that the git-submodule code works, it clears all local
git environment variables before entering submodules. This is normally
a good thing since we want to clear settings such as GIT_WORKTREE and
other variables which would affect the operation of submodule commands.
However, GIT_CONFIG_PARAMETERS is special, and we actually do want to
preserve these settings. However, we do not want to preserve all
configuration as many things should be left specific to the parent
project.
Add a git submodule--helper function, sanitize-config, which shall be
used to sanitize GIT_CONFIG_PARAMETERS, removing all key/value pairs
except a small subset that are known to be safe and necessary.
Replace all the calls to clear_local_git_env with a wrapped function
that filters GIT_CONFIG_PARAMETERS using the new helper and then
restores it to the filtered subset after clearing the rest of the
environment.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git submodule--helper clone command will fail with a segmentation
fault when given a null url or null path variable. Since these are
required for proper functioning of the submodule--helper clone
subcommand, add checks to prevent running and fail gracefully when
missing.
Update the usage string to reflect the requirement that the --url and
--path "options" are required.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule--helper clone usage stated that paths were added after the
[--] argument. The actual implementation required use of --path argument
and only supports one path at a time. Update the usage string to match
the current implementation.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extra unused arguments to git submodule--helper clone subcommand were
being silently ignored. Add a check to the argc count after options
handling to ensure that no extra arguments were left on the argv array.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose possible parallelism either via the "--jobs" CLI parameter or
the "submodule.fetchJobs" setting.
By having the variable initialized to -1, we make sure 0 can be passed
into the parallel processing machine, which will then pick as many parallel
workers as there are CPUs.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix is added by die(...), so we don't have to do it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a new helper function in git submodule--helper
which takes care of cloning all submodules, which we want to
parallelize eventually.
Some tests (such as empty URL, update_mode=none) are required in the
helper to make the decision for cloning. These checks have been
moved into the C function as well (no need to repeat them in the
shell script).
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a regression introduced by 74703a1e4d (submodule: rewrite
`module_list` shell function in C, 2015-09-02).
Add a test to ensure we list the right submodule when giving a
specific pathspec.
Reported-By: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reimplements the helper function `module_clone` in shell
in C as `clone`. This functionality is needed for converting
`git submodule update` later on, which we want to add threading
to.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements the helper `name` in C instead of shell,
yielding a nice performance boost.
Before this patch, I measured a time (best out of three):
$ time ./t7400-submodule-basic.sh >/dev/null
real 0m11.066s
user 0m3.348s
sys 0m8.534s
With this patch applied I measured (also best out of three)
$ time ./t7400-submodule-basic.sh >/dev/null
real 0m10.063s
user 0m3.044s
sys 0m7.487s
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the submodule operations work on a set of submodules.
Calculating and using this set is usually done via:
module_list "$@" | {
while read mode sha1 stage sm_path
do
# the actual operation
done
}
Currently the function `module_list` is implemented in the
git-submodule.sh as a shell script wrapping a perl script.
The rewrite is in C, such that it is faster and can later be
easily adapted when other functions are rewritten in C.
git-submodule.sh, similar to the builtin commands, will navigate
to the top-most directory of the repository and keep the
subdirectory as a variable. As the helper is called from
within the git-submodule.sh script, we are already navigated
to the root level, but the path arguments are still relative
to the subdirectory we were in when calling git-submodule.sh.
That's why there is a `--prefix` option pointing to an alternative
path which to anchor relative path arguments.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>