"checkout --merge -- path" and "update-index --unresolve path" did
not resurrect conflicted state that was resolved to remove path,
but now they do.
* jc/unresolve-removal:
checkout: allow "checkout -m path" to unmerge removed paths
checkout/restore: add basic tests for --merge
checkout/restore: refuse unmerging paths unless checking out of the index
update-index: remove stale fallback code for "--unresolve"
update-index: use unmerge_index_entry() to support removal
resolve-undo: allow resurrecting conflicted state that resolved to deletion
update-index: do not read HEAD and MERGE_HEAD unconditionally
Extract the commonly used initialization of the --stat-width=<width>,
--stat-name-width=<width> and --stat-graph-with=<width> parameters to their
internal default values into a helper function, to avoid repeating the same
initialization code in a few places.
Add a couple of tests to additionally cover existing configuration options
diff.statNameWidth=<width> and diff.statGraphWidth=<width> when used by
git-merge to generate --stat outputs. This closes the gap that existed
previously in the --stat tests, and reduces the chances for having any
regressions introduced by this commit.
While there, perform a small bunch of minor wording tweaks in the improved
unit test, to improve its test-level consistency a bit.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" learned diff.statNameWidth configuration variable, to
give the default width for the name part in the "--stat" output.
* ds/stat-name-width-configuration:
diff --stat: add config option to limit filename width
Unused parameters in fsmonitor related code paths have been marked
as such.
* jk/fsmonitor-unused-parameter:
run-command: mark unused parameters in start_bg_wait callbacks
fsmonitor: mark unused hashmap callback parameters
fsmonitor/darwin: mark unused parameters in system callback
fsmonitor: mark unused parameters in stub functions
fsmonitor/win32: mark unused parameter in fsm_os__incompatible()
fsmonitor: mark some maybe-unused parameters
fsmonitor/win32: drop unused parameters
fsmonitor: prefer repo_git_path() to git_pathdup()
The load_commit_graph_chain_fd_st() function will stop loading chains
when it sees an error. But if it has loaded any graph slice at all, it
will return it. This is a good thing for normal use (we use what data we
can, and this is just an optimization). But it's a bad thing for
"commit-graph verify", which should be careful about finding any
irregularities. We do complain to stderr with a warning(), but the
verify command still exits with a successful return code.
The new tests here cover corruption of both the base and tip slices of
the chain. The corruption of the base file already works (it is the
first file we look at, so when we see the error we return NULL). The
"tip" case is what is fixed by this patch (it complains to stderr but
still returns the base slice).
Likewise the existing tests for corruption of the commit-graph-chain
file itself need to be updated. We already exited non-zero correctly for
the "base" case, but the "tip" case can now do so, too.
Note that this also causes us to adjust a test later in the file that
similarly corrupts a tip (though confusingly the test script calls this
"base"). It checks stderr but erroneously expects the whole "verify"
command to exit with a successful code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it's OK to not have a graph file at all, the graph_verify()
function needs to tell the difference between a missing file and a real
error. So when loading a traditional graph file, we call
open_commit_graph() separately from load_commit_graph_chain_fd_st(), and
don't complain if the first one fails with ENOENT.
When the function learned about chain files in 3da4b609bb (commit-graph:
verify chains with --shallow mode, 2019-06-18), we couldn't be as
careful, since the only way to load a chain was with
read_commit_graph_one(), which did both the open/load as a single unit.
So we'll miss errors in chain files we load, thinking instead that there
was just no chain file at all.
Note that we do still report some of these problems to stderr, as the
loading function calls error() and warning(). But we'd exit with a
successful exit code, which is wrong.
We can fix that by using the recently split open/load functions for
chains. That lets us treat the chain file just like a single file with
respect to error handling here.
An existing test (from 3da4b609bb) shows off the problem; we were
expecting "commit-graph verify" to report success, but that makes no
sense. We did not even verify the contents of the graph data, because we
couldn't load it! I don't think this was an intentional exception, but
rather just the test covering what happened to occur.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add merge strategy option to produce more customizable merge result such
as automatically resolving conflicts.
Signed-off-by: Tang Yuyi <winglovet@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to keep track of existing packs in the repository while
repacking has been refactored.
* tb/repack-existing-packs-cleanup:
builtin/repack.c: extract common cruft pack loop
builtin/repack.c: avoid directly inspecting "util"
builtin/repack.c: store existing cruft packs separately
builtin/repack.c: extract `has_existing_non_kept_packs()`
builtin/repack.c: extract redundant pack cleanup for existing packs
builtin/repack.c: extract redundant pack cleanup for --geometric
builtin/repack.c: extract marking packs for deletion
builtin/repack.c: extract structure to store existing packs
The argument order was incorrect. This was introduced by 246cac8505
(i18n: turn even more messages into "cannot be used together" ones,
2022-01-05).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index" learns "--show-index-version" to inspect
the index format version used by the on-disk index file.
* jc/update-index-show-index-version:
test-tool: retire "index-version"
update-index: add --show-index-version
update-index doc: v4 is OK with JGit and libgit2
Update "git maintainance" timers' implementation based on systemd
timers to work with WSL.
* js/systemd-timers-wsl-fix:
maintenance(systemd): support the Windows Subsystem for Linux
The start_bg_command() function takes a callback to tell when the
background-ed process is "ready". The callback receives the
child_process struct as well as an extra void pointer. But curiously,
neither of the two users of this interface look at either parameter!
This makes some sense. The only non-test user of the API is fsmonitor,
which uses fsmonitor_ipc__get_state() to connect to a single global
fsmonitor daemon (i.e., the one we just started!).
So we could just drop these parameters entirely. But it seems like a
pretty reasonable interface for the "wait" callback to have access to
the details of the spawned process, and to have room for passing extra
data through a void pointer. So let's leave these in place but mark the
unused ones so that -Wunused-parameter does not complain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like many hashmap comparison functions, our cookies_cmp() does not look
at its extra void data parameter. This should have been annotated in
02c3c59e62 (hashmap: mark unused callback parameters, 2022-08-19), but
this new case was added around the same time (plus fsmonitor is not
built at all on Linux, so it is easy to miss there).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a bit of conditionally-compiled code in fsmonitor, so some
function parameters may be unused depending on the build options:
- in fsmonitor--daemon.c's try_to_run_foreground_daemon(), we take a
detach_console argument, but it's only used on Windows. This seems
intentional (and not mistakenly missing other platforms) based on
the discussion in c284e27ba7 (fsmonitor--daemon: implement 'start'
command, 2022-03-25), which introduced it.
- in fsmonitor-setting.c's check_for_incompatible(), we pass the "ipc"
flag down to the system-specific fsm_os__incompatible() helper. But
we can only do so if our platform has such a helper.
In both cases we can mark the argument as MAYBE_UNUSED. That annotates
it enough to suppress the compiler's -Wunused-parameter warning, but
without making it impossible to use the variable, as a regular UNUSED
annotation would.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep -e A --no-or -e B" is accepted, even though the negation
of "or" did not mean anything, which has been tightened.
* rs/grep-no-no-or:
grep: reject --no-or
Add new configuration option diff.statNameWidth=<width> that is equivalent
to the command-line option --stat-name-width=<width>, but it is ignored
by format-patch. This follows the logic established by the already
existing configuration option diff.statGraphWidth=<width>.
Limiting the widths of names and graphs in the --stat output makes sense
for interactive work on wide terminals with many columns, hence the support
for these configuration options. They don't affect format-patch because
it already adheres to the traditional 80-column standard.
Update the documentation and add more tests to cover new configuration
option diff.statNameWidth=<width>. While there, perform a few minor code
and whitespace cleanups here and there, as spotted.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating the list of packs to store in a MIDX (when given the
`--write-midx` option), we include any cruft packs both during
--geometric and non-geometric repacks.
But the rules for when we do and don't have to check whether any of
those cruft packs were queued for deletion differ slightly between the
two cases.
But the two can be unified, provided there is a little bit of extra
detail added in the comment to clarify when it is safe to avoid checking
for any pending deletions (and why it is OK to do so even when not
required).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `->util` field corresponding to each string_list_item is used to
track the existence of some pack at the beginning of a repack operation
was originally intended to be used as a bitfield.
This bitfield tracked:
- (1 << 0): whether or not the pack should be deleted
- (1 << 1): whether or not the pack is cruft
The previous commit removed the use of the second bit, but a future
patch (from a different series than this one) will introduce a new use
of it.
So we could stop treating the util pointer as a bitfield and instead
start treating it as if it were a boolean. But this would require some
backtracking when that later patch is applied.
Instead, let's avoid touching the ->util field directly, and instead
introduce convenience functions like:
- pack_mark_for_deletion()
- pack_is_marked_for_deletion()
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When repacking with the `--write-midx` option, we invoke the function
`midx_included_packs()` in order to produce the list of packs we want to
include in the resulting MIDX.
This list is comprised of:
- existing .keep packs
- any pack(s) which were written earlier in the same process
- any unchanged packs when doing a `--geometric` repack
- any cruft packs
Prior to this patch, we stored pre-existing cruft and non-cruft packs
together (provided those packs are non-kept). This meant we needed an
additional bit to indicate which non-kept pack(s) were cruft versus
those that aren't.
But alternatively we can store cruft packs in a separate list, avoiding
the need for this extra bit, and simplifying the code below.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is:
- at least one pre-existing packfile (which is not marked as kept),
- repacking with the `-d` flag, and
- not doing a cruft repack
, then we pass a handful of additional options to the inner
`pack-objects` process, like `--unpack-unreachable`,
`--keep-unreachable`, and `--pack-loose-unreachable`, in addition to
marking any packs we just wrote for promisor remotes as kept in-core
(with `--keep-pack`, as opposed to the presence of a ".keep" file on
disk).
Because we store both cruft and non-cruft packs together in the same
`existing.non_kept_packs` list, it suffices to check its `nr` member to
see if it is zero or not.
But a following change will store cruft- and non-cruft packs separately,
meaning this check would break as a result. Prepare for this by
extracting this part of the check into a new helper function called
`has_existing_non_kept_packs()`.
This patch does not introduce any functional changes, but prepares us to
make a more isolated change in a subsequent patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To remove redundant packs at the end of a repacking operation, Git uses
its `remove_redundant_pack()` function in a loop over the set of
pre-existing, non-kept packs.
In a later commit, we will split this list into two, one for
pre-existing cruft pack(s), and another for non-cruft pack(s). Prepare
for this by factoring out the routine to loop over and delete redundant
packs into its own function.
Instead of calling `remove_redundant_pack()` directly, we now will call
`remove_redundant_existing_packs()`, which itself dispatches a call to
`remove_redundant_packs_1()`. Note that the geometric repacking code
will still call `remove_redundant_pack()` directly, but see the previous
commit for more details.
Having `remove_redundant_packs_1()` exist as a separate function may
seem like overkill in this patch. However, a later patch will call
`remove_redundant_packs_1()` once over two separate lists, so this
refactoring sets us up for that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To reduce the complexity of the already quite-long `cmd_repack()`
implementation, extract out the parts responsible for deleting redundant
packs from a geometric repack out into its own sub-routine.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of a repack (when given `-d`), Git attempts to remove any
packs which have been made "redundant" as a result of the repacking
operation. For example, an all-into-one (`-A` or `-a`) repack makes
every pre-existing pack which is not marked as kept redundant. Geometric
repacks (with `--geometric=<n>`) make any packs which were rolled up
redundant, and so on.
But before deleting the set of packs we think are redundant, we first
check to see whether or not we just wrote a pack which is identical to
any one of the packs we were going to delete. When this is the case, Git
must avoid deleting that pack, since it matches a pack we just wrote
(so deleting it may cause the repository to become corrupt).
Right now we only process the list of non-kept packs in a single pass.
But a future change will split the existing non-kept packs further into
two lists: one for cruft packs, and another for non-cruft packs.
Factor out this routine to prepare for calling it twice on two separate
lists in a future patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repack machinery needs to keep track of which packfiles were present
in the repository at the beginning of a repack, segmented by whether or
not each pack is marked as kept.
The names of these packs are stored in two `string_list`s, corresponding
to kept- and non-kept packs, respectively. As a consequence, many
functions within the repack code need to take both `string_list`s as
arguments, leading to code like this:
ret = write_cruft_pack(&cruft_po_args, packtmp, pack_prefix,
cruft_expiration, &names,
&existing_nonkept_packs, /* <- */
&existing_kept_packs); /* <- */
Wrap up this pair of `string_list`s into a single structure that stores
both. This saves us from having to pass both string lists separately,
and prepares for adding additional fields to this structure.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unused parameters to functions are marked as such, and/or removed,
in order to bring us closer to -Wunused-parameter clean.
* jk/unused-post-2.42-part2:
parse-options: mark unused parameters in noop callback
interpret-trailers: mark unused "unset" parameters in option callbacks
parse-options: add more BUG_ON() annotations
merge: do not pass unused opt->value parameter
parse-options: mark unused "opt" parameter in callbacks
parse-options: prefer opt->value to globals in callbacks
checkout-index: delay automatic setting of to_tempfile
format-patch: use OPT_STRING_LIST for to/cc options
merge: simplify parsing of "-n" option
merge: make xopts a strvec
"git update-index --index-version N" is used to set the index format
version to a specific version, but there was no way to query the
current version used in the on-disk index file.
Teach the command a new "--show-index-version" option, and also
teach the "--index-version N" option to report what the version was
when run with the "--verbose" option.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running in the Windows Subsystem for Linux (WSL), it is usually
necessary to use the Git Credential Manager for authentication when
performing the background fetches.
This requires interoperability between the Windows Subsystem for Linux
and the Windows host to work, which uses so-called vsocks, i.e. sockets
intended for communcations between virtual machines and the host they
are running on.
However, when Git is configured to run background maintenance via
`systemd`, the address families available to those maintenance processes
are restricted, and did not include `AF_VSOCK`. This leads to problems
e.g. when a background fetch tries to access github.com:
systemd[437]: Starting Optimize Git repositories data...
git[747387]: WSL (747387) ERROR: UtilBindVsockAnyPort:285: socket failed 97
git[747381]: fatal: could not read Username for 'https://github.com': No such device or address
git[747381]: error: failed to prefetch remotes
git[747381]: error: task 'prefetch' failed
systemd[437]: git-maintenance@hourly.service: Main process exited, code=exited, status=1/FAILURE
systemd[437]: git-maintenance@hourly.service: Failed with result 'exit-code'.
systemd[437]: Failed to start Optimize Git repositories data.
Address this (pun intended) by adding the `AF_VSOCK` address family to
the allow list.
This fixes https://github.com/microsoft/git/issues/604.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--trailer` option takes a "<token>=<value>" argument, for example
--trailer "Acked-by=Bob"
And in this exampple it is understood that "Acked-by" is the <token>.
However, the user can use a shorter "ack" string by defining
configuration like
git config trailer.ack.key "Acked-by"
However, in the docs we define the above configuration as
trailer.<token>.key
so the <token> can mean either the longer "Acked-by" or the shorter
"ack".
Separate the two meanings of <token> into <key> and <keyAlias>, and
update the configuration syntax to say "trailer.<keyAlias>.key".
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrase "join whitespace-continued values" requires some additional
context. For example, "whitespace" means newlines (not just space
characters), and "join" means to join only the multiple lines together
for a single trailer (and not that we are joining multiple trailers
together). That is, "join" means to convert
token: This is a very long value, with spaces and
newlines in it.
to
token: This is a very long value, with spaces and newlines in it.
and does not mean to convert
token: value1
token: value2
to
token: value1 value2.
Update the help text to resolve the above ambiguity. While we're add it,
update the docs to use similar language as the change in the help text.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the phrase "configuration variables" instead of "rules" because
(1) we already say "configuration variables" in multiple
places in the docs (where the word "rules" is only used for describing
"--only-input" behavior and for an unrelated case of mentioning how
the trailers do not follow "rules for RFC 822 headers"), and
(2) this phrase is more specific than just "rules".
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing description "set parsing options" is vague, because
arguably _all_ of the options for interpret-trailers have to do with
parsing to some degree.
Explain what this flag does to match what is in the docs, namely how
it is an alias for "--only-trailers --only-input --unfold".
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the help text to say "placement" instead of "action" because the
values are placements, not actions.
While we're at it, tweak the documentation to say "placements" instead
of "values", similar to how the existing language for "--if-exists" uses
the word "action" to describe both the syntax (with the phrase
"--if-exists <action>") and the possible values (with the phrase
"possible actions").
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --rfc --subject-prefix=<foo>" used to ignore the
"--subject-prefix" option and used "[RFC PATCH]"; now we will add
"RFC" prefix to whatever subject prefix is specified.
This is a backward compatible change that may deserve a note.
* dd/format-patch-rfc-updates:
format-patch: --rfc honors what --subject-prefix sets
Unused parameters to functions are marked as such, and/or removed,
in order to bring us closer to -Wunused-parameter clean.
* jk/unused-post-2.42: (22 commits)
update-ref: mark unused parameter in parser callbacks
gc: mark unused descriptors in scheduler callbacks
bundle-uri: mark unused parameters in callbacks
fetch: mark unused parameter in ref_transaction callback
credential: mark unused parameter in urlmatch callback
grep: mark unused parmaeters in pcre fallbacks
imap-send: mark unused parameters with NO_OPENSSL
worktree: mark unused parameters in noop repair callback
negotiator/noop: mark unused callback parameters
add-interactive: mark unused callback parameters
grep: mark unused parameter in output function
test-trace2: mark unused argv/argc parameters
trace2: mark unused config callback parameter
trace2: mark unused us_elapsed_absolute parameters
stash: mark unused parameter in diff callback
ls-tree: mark unused parameter in callback
commit-graph: mark unused data parameters in generation callbacks
worktree: mark unused parameters in each_ref_fn callback
pack-bitmap: mark unused parameters in show_object callback
ref-filter: mark unused parameters in parser callbacks
...
Use of --max-pack-size to allow multiple packfiles to be created is
now supported even when we are sending unreachable objects to cruft
packs.
* tb/multi-cruft-pack:
Documentation/gitformat-pack.txt: drop mixed version section
Documentation/gitformat-pack.txt: remove multi-cruft packs alternative
builtin/pack-objects.c: support `--max-pack-size` with `--cruft`
builtin/pack-objects.c: remove unnecessary strbuf_reset()
Since 3e230fa1b2 (grep: use parseopt, 2009-05-07) git grep has been
accepting the option --no-or. It does the same as --or: nothing.
That's confusing and unintended. Forbid negating --or.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code introduced in 576a37fccb (var: add attributes files locations,
2023-06-27) paid careful attention to use `xstrdup()` for pointers known
never to be `NULL`, and `xstrdup_or_null()` otherwise.
One spot was missed, though: `git_attr_global_file()` can return `NULL`,
when the `HOME` variable is not set (and neither `XDG_CONFIG_HOME`), a
scenario not too uncommon in certain server scenarios.
Fix this, and add a test case to avoid future regressions.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
a91f453f64 (grep: Add --max-depth option., 2009-07-22) added the option
--max-depth, defining it using a positional struct option initializer of
type OPTION_INTEGER. It also sets defval to 1 for some reason, but that
value would only be used if the flag PARSE_OPT_OPTARG was given.
Use the macro OPT_INTEGER_F instead to standardize the definition and
specify only the necessary values. This also normalizes argh to N_("n")
as a side-effect, which is OK.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
adfc1857bd (describe: fix --contains when a tag is given as input,
2013-07-18) added the option --peel-tag, defining it using a positional
struct option initializer and a comment indicating that it's intended to
be a hidden OPT_BOOL. 4741edd549 (Remove deprecated OPTION_BOOLEAN for
parsing arguments, 2013-08-03) added the macro OPT_HIDDEN_BOOL, which
allows to express this more succinctly. Use it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few parse-option callbacks that do not look at their "unset"
parameters, but also do not set PARSE_OPT_NONEG. At first glance this
seems like a bug, as we'd ignore "--no-if-exists", etc.
But they do work fine, because when "unset" is true, then "arg" is NULL.
And all three functions pass "arg" on to helper functions which do the
right thing with the NULL.
Note that this shortcut would not be correct if any callback used
PARSE_OPT_NOARG (in which case "arg" would be NULL but "unset" would be
false). But none of these do.
So the code is fine as-is. But we'll want to mark the unused "unset"
parameters to quiet -Wunused-parameter. I've also added a comment to
make this rather subtle situation more explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These callbacks are similar to the ones touched by 517fe807d6 (assert
NOARG/NONEG behavior of parse-options callbacks, 2018-11-05), but were
either missed in that commit (the one in add.c) or were added later (the
one in log.c).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option_parse_strategy() callback does not look at opt->value;
instead it calls append_strategy(), which manipulates the global
use_strategies array directly. But the OPT_CALLBACK declaration assigns
"&use_strategies" to opt->value.
One could argue this is good, as it tells the reader what we generally
expect the callback to do. But it is also bad, because it can mislead
you into thinking that swapping out "&use_strategies" there might have
any effect. Let's switch it to pass NULL (which is what every other
"does not bother to look at opt->value" callback does). If you want to
know what the callback does, it's easy to read the function itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit argued that parse-options callbacks should try to
use opt->value rather than touching globals directly. In some cases,
however, that's awkward to do. Some callbacks touch multiple variables,
or may even just call into an abstracted function that does so.
In some of these cases we _could_ convert them by stuffing the multiple
variables into a single struct and passing the struct pointer through
opt->value. But that may make other parts of the code less readable,
as the struct relationship has to be mentioned everywhere.
Let's just accept that these cases are special and leave them as-is. But
we do need to mark their "opt" parameters to satisfy -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have several parse-options callbacks that ignore their "opt"
parameters entirely. This is a little unusual, as we'd normally put the
result of the parsing into opt->value. In the case of these callbacks,
though, they directly manipulate global variables instead (and in
most cases the caller sets opt->value to NULL in the OPT_CALLBACK
declaration).
The immediate symptom we'd like to deal with is that the unused "opt"
variables trigger -Wunused-parameter. But how to fix that is debatable.
One option is to annotate them with UNUSED. But another is to have the
caller pass in the appropriate variable via opt->value, and use it. That
has the benefit of making the callbacks reusable (in theory at least),
and makes it clear from the OPT_CALLBACK declaration which variables
will be affected (doubly so for the cases in builtin/fast-export.c,
where we do set opt->value, but it is completely ignored!).
The slight downside is that we lose type safety, since they're now
passing through void pointers.
I went with the "just use them" approach here. The loss of type safety
is unfortunate, but that is already an issue with most of the other
callbacks. If we want to try to address that, we should do so more
consistently (and this patch would prepare these callbacks for whatever
we choose to do there).
Note that in the cases in builtin/fast-export.c, we are passing
anonymous enums. We'll have to give them names so that we can declare
the appropriate pointer type within the callbacks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using --stage=all requires writing to tempfiles, since we cannot put
multiple stages into a single file. So --stage=all implies --temp.
But we do so by setting to_tempfile in the options callback for --stage,
rather than after all options have been parsed. This leads to two bugs:
1. If you run "checkout-index --stage=all --stage=2", this should not
imply --temp, but it currently does. The callback cannot just unset
to_tempfile when it sees the "2" value, because it no longer knows
if its value was from the earlier --stage call, or if the user
specified --temp explicitly.
2. If you run "checkout-index --stage=all --no-temp", the --no-temp
will overwrite the earlier implied --temp. But this mode of
operation cannot work, and the command will fail with "<path>
already exists" when trying to write the higher stages.
We can fix both by lazily setting to_tempfile. We'll make it a tristate,
with -1 as "not yet given", and have --stage=all enable it only after
all options are parsed. Likewise, after all options are parsed we can
detect and reject the bogus "--no-temp" case.
Note that this does technically change the behavior for "--stage=all
--no-temp" for paths which have only one stage present (which
accidentally worked before, but is now forbidden). But this behavior was
never intended, and you'd have to go out of your way to try to trigger
it.
The new tests cover both cases, as well the general "--stage=all implies
--temp", as most of the other tests explicitly say "--temp". Ironically,
the test "checkout --temp within subdir" is the only one that _doesn't_
use "--temp", and so was implicitly covering this case. But it seems
reasonable to have a more explicit test alongside the other related
ones.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learns a way to feed cover letter description,
that (1) can be used on detached HEAD where there is no branch
description available, and (2) also can override the branch
description if there is one.
* ob/format-patch-description-file:
format-patch: add --description-file option
"git diff --no-such-option" and other corner cases around the exit
status of the "diff" command has been corrected.
* jk/diff-result-code-cleanup:
diff: drop useless "status" parameter from diff_result_code()
diff: drop useless return values in git-diff helpers
diff: drop useless return from run_diff_{files,index} functions
diff: die when failing to read index in git-diff builtin
diff: show usage for unknown builtin_diff_files() options
diff-files: avoid negative exit value
diff: spell DIFF_INDEX_CACHED out when calling run_diff_index()
The OpenSSL 3+ EVP API for SHA-* cannot support our prior use cases
supported by other SHA-* implementations. It has the following
differences:
1. ->init_fn is required before all use
2. struct assignments don't work and requires ->clone_fn
3. can't support ->update_fn after ->final_*fn
While fixing cases 1 and 2 is merely the matter of calling ->init_fn and
->clone_fn as appropriate, fixing case 3 requires calling ->final_*fn on
a temporary context that's cloned from the primary context.
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/ZPCL11k38PXTkFga@debian.me/
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Fixes: 3e440ea0ab ("sha256: avoid functions deprecated in OpenSSL 3+")
Fixes: bda9c12073 ("avoid SHA-1 functions deprecated in OpenSSL 3+")
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The to_callback() and cc_callback() functions are identical to the
generic parse_opt_string_list() function (except that they don't handle
optional arguments, but that's OK because their callers do not use the
OPTARG flag).
Let's simplify the code by using OPT_STRING_LIST.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-n" option is implemented by an option callback, as it is really a
"reverse bool". If given, it sets show_diffstat to 0. In theory, when
negated, it would set the same flag to 1. But it's not possible to
trigger that, since short options cannot be negated.
So in practice this is really just a SET_INT to 0. Let's use that
instead, which shortens the code.
Note that negation here would do the wrong thing (as with any SET_INT
with a value of "0"). We could specify PARSE_OPT_NONEG to future-proof
ourselves against somebody adding a long option name (which would make
it possible to negate). But there's not much point:
1. Nobody is going to do that, because the negated form already
exists, and is called "--stat" (which is defined separately so that
"--no-stat" works).
2. If they did, the BUG() check added by 3284b93862 (parse-options:
disallow negating OPTION_SET_INT 0, 2023-08-08) will catch it (and
that check is smart enough to realize that our short-only option is
OK).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "xopts" variable uses a custom array with ALLOC_GROW(). Using a
strvec simplifies things a bit. We need fewer variables, and we can also
ditch our custom parseopt callback in favor of OPT_STRVEC().
As a bonus, this means that "--no-strategy-option", which was previously
a silent noop, now does something useful: like other list-like options,
it will clear the list of -X options seen so far. This matches the
behavior of revert/cherry-pick, which made the same change in fb60b9f37f
(sequencer: use struct strvec to store merge strategy options,
2023-04-10).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than replacing the configured subject prefix (either through the
git config or command line) entirely with "RFC PATCH", this change
prepends RFC to whatever subject prefix was already in use.
This is useful, for example, when a user is working on a repository that
has a subject prefix considered to disambiguate patches:
git config format.subjectPrefix 'PATCH my-project'
Prior to this change, formatting patches with --rfc would lose the
'my-project' information.
The data flow for the subject-prefix was that rev.subject_prefix
were to be kept the authoritative version of the subject prefix even
while parsing command line options, and sprefix variable was used as
a temporary area to futz with it. Now, the parsing code has been
refactored to build the subject prefix into the sprefix variable and
assigns its value at the end to rev.subject_prefix, which makes the
flow easier to grasp.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
transfer.unpackLimit ought to be used as a fallback, but overrode
fetch.unpackLimit and receive.unpackLimit instead.
* ts/unpacklimit-config-fix:
transfer.unpackLimit: fetch/receive.unpackLimit takes precedence
The parsing of stdin is driven by a table of function pointers; mark
unused parameters in concrete functions to avoid -Wunused-parameter
warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of the scheduler update callbacks gets the descriptor of the lock
file, but only the crontab updater needs it. We have to retain the
unused descriptors because these are dispatched from a table of function
pointers, but we should mark them to silence -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this callback is just trying to collect the set of queued tag
updates, there is no need for it to look at old_oid at all. Mark it as
unused to appease -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to the cases in 61bdc7c5d8 (diff: mark unused parameters
in callbacks, 2022-12-13), but I missed it when making that commit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The formatting functions are dispatched from a table of function
pointers. The "path name only" function unsurprisingly does not need to
look at its "oid" parameter, but we must mark it as unused to make
-Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to the cases in 63e14ee2d6 (refs: mark unused
each_ref_fn parameters, 2022-08-19), but it was added after that commit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git check-attr" work better with sparse-index.
* sl/sparse-check-attr:
check-attr: integrate with sparse-index
attr.c: read attributes in a sparse directory
t1092: add tests for 'git check-attr'
When pack-objects learned the `--cruft` option back in b757353676
(builtin/pack-objects.c: --cruft without expiration, 2022-05-20), we
explicitly forbade `--cruft` with `--max-pack-size`.
At the time, there was no specific rationale given in the patch for not
supporting the `--max-pack-size` option with `--cruft`. (As best I can
remember, it's because we were trying to push users towards only ever
having a single cruft pack, but I cannot be sure).
However, `--max-pack-size` is flexible enough that it already works with
`--cruft` and can shard unreachable objects across multiple cruft packs,
creating separate ".mtimes" files as appropriate. In fact, the
`--max-pack-size` option worked with `--cruft` as far back as
b757353676!
This is because we overwrite the `written_list`, and pass down the
appropriate length, i.e. the number of objects written in each pack
shard.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading input with the `--cruft` option, `git pack-objects` reads
each line into a strbuf, and then moves it to either the list of
discarded or fresh packs, depending on whether or not the input line
starts with a '-' character.
At the beginning of each loop iteration, the next line of input is read
with `strbuf_getline()`, which calls `strbuf_reset()` (as a part of
`strbuf_getwholeline()`) before reading the next line of input.
Thus, the call to `strbuf_reset()` (added back in b757353676
(builtin/pack-objects.c: --cruft without expiration, 2022-05-20)) at the
end of the loop is unnecessary, so let's remove it accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hourly and other schedule of "git maintenance" jobs are randomly
distributed now.
* ds/maintenance-schedule-fuzz:
maintenance: update schedule before config
maintenance: fix systemd schedule overlaps
maintenance: use random minute in systemd scheduler
maintenance: swap method locations
maintenance: use random minute in cron scheduler
maintenance: use random minute in Windows scheduler
maintenance: use random minute in launchctl scheduler
maintenance: add get_random_minute()
A message written in olden time prevented a branch from getting
checked out saying it is already checked out elsewhere, but these
days, we treat a branch that is being bisected or rebased just like
a branch that is checked out and protect it. Rephrase the message
to say that the branch is in use.
* rj/branch-in-use-error-message:
branch: error message checking out a branch in use
branch: error message deleting a branch in use
The transfer.unpackLimit configuration variable is documented to be
used only as a fallback value when the more operation-specific
fetch.unpackLimit and receive.unpackLimit variables are not set, but
the implementation had the precedence reversed. Apparently this was
broken since the transfer.unpackLimit was introduced in e28714c5
(Consolidate {receive,fetch}.unpackLimit, 2007-01-24).
Often when documentation and code have diverged for so long, we
prefer to change the documentation instead, to avoid disrupting
users. But doing so would make these weirdly unlike most other
"specific overrides general" config options. And the fact that the
bug has existed for so long without anyone noticing implies to me
that nobody really tries to mix and match them much.
Signed-off-by: Taylor Santiago <taylorsantiago@google.com>
[jc: rewrote the log message, added tests, covered receive-pack as well]
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many programs use diff_result_code() to get a user-visible program exit
code from a diff result (e.g., checking opts.found_changes if
--exit-code was requested).
This function also takes a "status" parameter, which seems at first
glance that it could be used to propagate an error encountered when
computing the diff. But it doesn't work that way:
- negative values are passed through as-is, but are not appropriate as
program exit codes
- when --exit-code or --check is in effect, we _ignore_ the passed-in
status completely. So a failed diff which did not have a chance to
set opts.found_changes would erroneously report "success, no
changes" instead of propagating the error.
After recent cleanups, neither of these bugs is possible to trigger, as
every caller just passes in "0". So rather than fixing them, we can
simply drop the useless parameter instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git-diff has many diff modes, it dispatches to many helpers to
perform each one. But every helper simply returns "0", as it exits
directly if there are serious errors (and options like --exit-code are
handled afterwards). So let's get rid of these useless return values,
which makes the code flow more clear.
There's very little chance that we'd later want to propagate errors
instead of dying immediately. These are all static-local helpers for the
git-diff program implementing its various modes. More "lib-ified" code
would directly call the underlying functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neither of these functions ever returns a value other than zero.
Instead, they expect unrecoverable errors to exit immediately, and
things like "--exit-code" are stored inside the diff_options struct to
be handled later via diff_result_code().
Some callers do check the return values, but many don't bother. Let's
drop the useless return values, which are misleading callers about how
the functions work. This could be seen as a step in the wrong direction,
as we might want to eventually "lib-ify" these to more cleanly return
errors up the stack, in which case we'd have to add the return values
back in. But there are some benefits to doing this now:
1. In the current code, somebody could accidentally add a "return -1"
to one of the functions, which would be erroneously ignored by many
callers. By removing the return code, the compiler can notice the
mismatch and force the developer to decide what to do.
Obviously the other option here is that we could start consistently
checking the error code in every caller. But it would be dead code,
and we wouldn't get any compile-time help in catching new cases.
2. It communicates the situation to callers, who may want to choose a
different function. These functions are really thin wrappers for
doing git-diff-files and git-diff-index within the process. But
callers who care about recovering from an error here are probably
better off using the underlying library functions, many of
which do return errors.
If somebody eventually wants to teach these functions to propagate
errors, they'll have to switch back to returning a value, effectively
reverting this patch. But at least then they will be starting with a
level playing field: they know that they will need to inspect each
caller to see how it should handle the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the git-diff program fails to read the index in its diff-files or
diff-index helper functions, it propagates the error up the stack. This
eventually lands in diff_result_code(), which does not handle it well
(as discussed in the previous patch).
Since the only sensible thing here is to exit with an error code (and
what we were expecting the propagated error code to cause), let's just
do that directly.
There's no test here, as I'm not even sure this case can be triggered.
The index-reading functions tend to die() themselves when encountering
any errors, and the return value is just the number of entries in the
file (and so always 0 or positive). But let's err on the conservative
side and keep checking the return value. It may be worth digging into as
a separate topic (though index-reading is low-level enough that we
probably want to eventually teach it to propagate errors anyway for
lib-ification purposes, at which point this code would already be doing
the right thing).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-diff command has many modes (comparing worktree to index, index
to HEAD, individual blobs, etc). As a result, it dispatches to many
helper functions and cannot completely parse its options until we're in
those helper functions.
Most of them, when seeing an unknown option, exit immediately by calling
usage(). But builtin_diff_files(), which is the default if no revision
or blob arguments are given, instead prints an error() and returns -1.
One obvious shortcoming here is that the user doesn't get to see the
usual usage message. But there's a much more important bug: the -1
return is fed to diff_result_code(), which is not ready to handle it.
By default, it passes the code along as an exit code. We try to avoid
negative exit codes because they get converted to unsigned values, but
it should at least consistently show up as non-zero (i.e., a failure).
But much worse is that when --exit-code is in effect, diff_result_code()
will _ignore_ the status passed in by the caller, and instead only
report on whether the diff found changes. It didn't, of course, because
we never ran the diff, and the program unexpectedly exits with success!
We can fix this bug by just calling usage(), like the other helpers do.
Another option would of course be to teach diff_result_code() to handle
this value. But as we'll see in the next few patches, it can be cleaned
up even further. Let's just fix this bug directly to start with.
Reported-by: Romain Chossart <romainchossart@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If loading the index fails, we print an error and then return "-1" from
the function. But since this is a builtin, we end up with exit(-1),
which produces odd results since program exit codes are unsigned.
Because of integer conversion, it usually becomes 255, which is at least
still an error, but values above 128 are usually interpreted as signal
death.
Since we know the program is exiting immediately, we can just replace
the error return with a die().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers of run_diff_index() passed literal "1" for the option
flag word, which should better be spelled out as DIFF_INDEX_CACHED
for readablity. Everybody else passes "0" that can stay as-is.
The other bit in the option flag word is DIFF_INDEX_MERGE_BASE, but
curiously there is only one caller that can pass it, which is "git
diff-index --merge-base" itself---no internal callers uses the
feature.
A bit tricky call to the function is in builtin/submodule--helper.c
where the .cached member in a private struct is set/reset as a plain
Boolean flag, which happens to be "1" and happens to match the value
of DIFF_INDEX_CACHED.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes it possible to directly feed a branch description to
derive the cover letter from. The use case is formatting dynamically
created temporary commits which are not referenced anywhere.
The most obvious alternative would be creating a temporary branch and
setting a description on it, but that doesn't seem particularly elegant.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We switched the function interface for fsck callbacks in a1aad71601
(fsck.h: use "enum object_type" instead of "int", 2021-03-28). However,
we accidentally flipped the type back to "int" as part of 0b4e9013f1
(fsck: mark unused parameters in various fsck callbacks, 2023-07-03).
The mistake happened because that commit was written before a1aad71601
and rebased forward, and I screwed up while resolving the conflict.
Curiously, the compiler does not warn about this mismatch, at least not
when using gcc and clang on Linux (nor in any of our CI environments).
Based on 28abf260a5 (builtin/fsck.c: don't conflate "int" and "enum" in
callback, 2021-06-01), I'd guess that this would cause the AIX xlc
compiler to complain. I noticed because clang-18's UBSan now identifies
mis-matched function calls at runtime, and does complain of this case
when running the test suite.
I'm not entirely clear on whether this mismatch is a problem in
practice. Compilers are certainly free to make enums smaller than "int"
if they don't need the bits, but I suspect that they have to promote
back to int for function calls (though I didn't dig in the standard, and
I won't be surprised if I'm simply wrong and the real-world impact would
depend on the ABI).
Regardless, switching it back to enum is obviously the right thing to do
here; the switch to "int" was simply a mistake.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows updates.
* ds/maintenance-on-windows-fix:
git maintenance: avoid console window in scheduled tasks on Windows
win32: add a helper to run `git.exe` without a foreground window
Replace misspelled word "overide" with correctly spelled "override".
Reported-By: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Jacob Abel <jacobabel@nullpo.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If both directories D1 and D2 already exists, and further there is a
filesystem entity D2/D1, "git mv D1 D2" would fail, and we get an
error message that says:
"cannot move directory over file, source=D1, destination=D2/D1"
regardless of the type of existing "D2/D1". If it is a file, the
message is correct, but if it is a directory, it is not (we could
make the D2/D1 directory a union of its original contents and what
was in D1/, but that is not what we do).
The code that decies to issue the error message only checks for
existence of "D2/D1" and does not care what kind of thing sits at
the path.
Rephrase the message to say
"destination already exists, source=D1, destination=D2/D1"
that would be suitable for any kind of thing being in the way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the requires-full-index to false for "check-attr".
Add a test to ensure that the index is not expanded whether the files
are outside or inside the sparse-checkout cone when the sparse index is
enabled.
The `p2000` tests demonstrate a ~63% execution time reduction for
'git check-attr' using a sparse index.
Test before after
-----------------------------------------------------------------------
2000.106: git check-attr -a f2/f4/a (full-v3) 0.05 0.05 +0.0%
2000.107: git check-attr -a f2/f4/a (full-v4) 0.05 0.05 +0.0%
2000.108: git check-attr -a f2/f4/a (sparse-v3) 0.04 0.02 -50.0%
2000.109: git check-attr -a f2/f4/a (sparse-v4) 0.04 0.01 -75.0%
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git maintenance start', the current pattern is to
configure global config settings to enable maintenance on the current
repository and set 'maintenance.auto' to false and _then_ to set up the
schedule with the system scheduler.
This has a problematic error condition: if the scheduler fails to
initialize, the repository still will not use automatic maintenance due
to the 'maintenance.auto' setting.
Fix this gap by swapping the order of operations. If Git fails to
initialize maintenance, then the config changes should never happen.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git maintenance run' command prevents concurrent runs in the same
repository using a 'maintenance.lock' file. However, when using systemd
the hourly maintenance runs the same time as the daily and weekly runs.
(Similarly, daily maintenance runs at the same time as weekly
maintenance.) These competing commands result in some maintenance not
actually being run.
This overlap was something we could not fix until we made the recent
change to not use the builting 'hourly', 'daily', and 'weekly' schedules
in systemd. We can adjust the schedules such that:
1. Hourly runs avoid the 0th hour.
2. Daily runs avoid Monday.
This will keep maintenance runs from colliding when using systemd.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_random_minute() method was created to allow maintenance
schedules to be fixed to a random minute of the hour. This randomness is
only intended to spread out the load from a number of clients, but each
client should have an hour between each maintenance cycle.
Add this random minute to the systemd integration.
This integration is more complicated than similar changes for other
schedulers because of a neat trick that systemd allows: templating.
The previous implementation generated two template files with names
of the form 'git-maintenance@.(timer|service)'. The '.timer' or
'.service' indicates that this is a template that is picked up when we
later specify '...@<schedule>.timer' or '...@<schedule>.service'. The
'<schedule>' string is then used to insert into the template both the
'OnCalendar' schedule setting and the '--schedule' parameter of the
'git maintenance run' command.
In order to set these schedules to a given minute, we can no longer use
the 'hourly', 'daily', or 'weekly' strings for '<schedule>' and instead
need to abandon the template model for the .timer files. We can still
use templates for the .service files. For this reason, we split these
writes into two methods.
Modify the template with a custom schedule in the 'OnCalendar' setting.
This schedule has some interesting differences from cron-like patterns,
but is relatively easy to figure out from context. The one that might be
confusing is that '*-*-*' is a date-based pattern, but this must be
omitted when using 'Mon' to signal that we care about the day of the
week. Monday is used since that matches the day used for the 'weekly'
schedule used previously.
Now that the timer files are not templates, we might want to abandon the
'@' symbol in the file names. However, this would cause users with
existing schedules to get two competing schedules due to different
names. The work to remove the old schedule name is one thing that we can
avoid by keeping the '@' symbol in our unit names. Since we are locked
into this name, it makes sense that we keep the template model for the
.service files.
The rest of the change involves making sure we are writing these .timer
and .service files before initializing the schedule with 'systemctl' and
deleting the files when we are done. Some changes are also made to share
the random minute along with a single computation of the execution path
of the current Git executable.
In addition, older Git versions may have written a
'git-maintenance@.timer' template file. Be sure to remove this when
successfully enabling maintenance (or disabling maintenance).
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The systemd_timer_write_unit_templates() method writes a single template
that is then used to start the hourly, daily, and weekly schedules with
systemd.
However, in order to schedule systemd maintenance on a given minute,
these templates need to be replaced with specific schedules for each of
these jobs.
Before modifying the schedules, move the writing method above the
systemd_timer_enable_unit() method, so we can write a specific schedule
for each unit.
The diff is computed smaller by showing systemd_timer_enable_unit() and
systemd_timer_delete_units() move instead of
systemd_timer_write_unit_templates() and
systemd_timer_delete_unit_templates().
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_random_minute() method was created to allow maintenance
schedules to be fixed to a random minute of the hour. This randomness is
only intended to spread out the load from a number of clients, but each
client should have an hour between each maintenance cycle.
Add this random minute to the cron integration.
The cron schedule specification starts with a minute indicator, which
was previously inserted as the "0" string but now takes the given minute
as an integer parameter.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_random_minute() method was created to allow maintenance
schedules to be fixed to a random minute of the hour. This randomness is
only intended to spread out the load from a number of clients, but each
client should have an hour between each maintenance cycle.
Add this random minute to the Windows scheduler integration.
We need only to modify the minute value for the 'StartBoundary' tag
across the three schedules.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_random_minute() method was created to allow maintenance
schedules to be fixed to a random minute of the hour. This randomness is
only intended to spread out the load from a number of clients, but each
client should have an hour between each maintenance cycle.
Use get_random_minute() when constructing the schedules for launchctl.
The format already includes a 'Minute' key which is modified from 0 to
the random minute.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we initially created background maintenance -- with its hourly,
daily, and weekly schedules -- we considered the effects of all clients
launching fetches to the server every hour on the hour. The worry of
DDoSing server hosts was noted, but left as something we would consider
for a future update.
As background maintenance has gained more adoption over the past three
years, our worries about DDoSing the big Git hosts has been unfounded.
Those systems, especially those serving public repositories, are already
resilient to thundering herds of much smaller scale.
However, sometimes organizations spin up specific custom server
infrastructure either in addition to or on top of their Git host. Some
of these technologies are built for a different range of scale, and can
hit concurrency limits sooner. Organizations with such custom
infrastructures are more likely to recommend tools like `scalar` which
furthers their adoption of background maintenance.
To help solve for this, create get_random_minute() as a method to help
Git select a random minute when creating schedules in the future. The
integrations with this method do not yet exist, but will follow in
future changes.
To avoid multiple sources of randomness in the Git codebase, create a
new helper function, git_rand(), that returns a random uint32_t. This is
similar to how rand() returns a random nonnegative value, except it is
based on csprng_bytes() which is cryptographic and will return values
larger than RAND_MAX.
One thing that is important for testability is that we notice when we
are under a test scenario and return a predictable result. The schedules
themselves are not checked for this value, but at least one launchctl
test checks that we do not unnecessarily reboot the schedule if it has
not changed from a previous version.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `pack_geometry` struct is used to maintain and partition a list of
packfiles into a "frozen" set (to be left alone), and a non-frozen set
(to be combined into a single new pack). In the previous commit, we
removed a leak caused by neglecting to free() the heap allocated space
used to store the structure itself.
But there is no need for this structure to live on the heap anyway.
Instead, let's move it to be stack allocated, eliminating the
possibility of a direct leak like the one addressed in the previous
patch.
The one minor hitch is that we use the NULL-ness of the pack_geometry's
struct pointer to determine whether or not we are performing a geometric
repack with `--geometric=<d>`. But since we only initialize the
pack_geometry structure when the `geometric_factor` is non-zero, we can
use that variable (based on whether or not it is equal to zero) to
determine whether or not we are performing a geometric repack.
There are a couple of spots that have access to a pointer to the
pack_geometry struct, but not the geometric_factor itself. Instead of
passing in an additional variable, let's make the geometric_factor a
field of the pack_geometry struct.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We just introduced a helper to avoid showing a console window when the
scheduled task runs `git.exe`. Let's actually use it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When moving a directory onto another with `git mv` various checks are
performed. One of of these validates that the destination is not existing.
When calling `lstat` on the destination path and it fails as the path
doesn't exist, some environments seem to overwrite the passed in
`stat` memory nonetheless (I observed this issue on debian 12 of x86_64,
running on OrbStack on ARM, emulated with Rosetta).
This would affect the code that followed as it would still acccess a now
modified `st` structure, which now seems to contain uninitialized memory.
`S_ISDIR(st_dir_mode)` would then typically return false causing the code
to run into a bad case.
The fix avoids overwriting the existing `st` structure, providing an
alternative that exists only for that purpose.
Note that this patch minimizes complexity instead of stack-frame size.
Signed-off-by: Sebastian Thiel <sebastian.thiel@icloud.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the program is ending, we call clear_pack_geometry() to free any
resources in the pack_geometry struct. But the struct itself is
allocated on the heap, and leak-checkers will complain about the
resulting small leak.
This one was marked by Coverity as a "new" leak, though it has existed
since 0fabafd0b9 (builtin/repack.c: add '--geometric' option,
2021-02-22). This might be because recent unrelated changes in the file
confused it about what is new and what is not. But regardless, it is
worth addressing.
We can fix it easily by free-ing the struct. We'll convert our "clear"
function to "free", since the allocation happens in the matching init()
function (though since there is only one call to each, and the struct is
local to this file, it's mostly academic).
Another option would be to put the struct on the stack rather than the
heap. However, this gets tricky, as we check the pointer against NULL in
several places to decide whether we're in geometric mode.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's update the error message we show when the user tries to delete a
branch which is being used in another worktree, following the guideline
reasoned in 4970bedef2 (branch: update the message to refuse touching a
branch in-use, 2023-07-21).
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line parser fix, and a small parse-options API update.
* jc/parse-options-short-help:
short help: allow a gap smaller than USAGE_GAP
remote: simplify "remote add --tags" help text
short help: allow multi-line opthelp
Fix tests with unportable regex patterns.
* ja/worktree-orphan-fix:
t2400: rewrite regex to avoid unintentional PCRE
builtin/worktree.c: convert tab in advice to space
t2400: drop no-op `--sq` from rev-parse call
Code simplification.
* jc/tree-walk-drop-base-offset:
tree-walk: drop unused base_offset from do_match()
tree-walk: lose base_offset that is never used in tree_entry_interesting
"git checkout -m -- path" uses the unmerge_marked_index() API, whose
implementation is incapable of unresolving a path that was resolved
as removed. Extend the unmerge_index() API function so that we can
mark the ce_flags member of the cache entries we add to the index as
unmerged, and replace use of unmerge_marked_index() with it.
Now, together with its unmerge_index_entry_at() helper function,
unmerge_marked_index() function is no longer called by anybody, and
can safely be removed.
This makes two known test failures in t2070 and t7201 to succeed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recreating unmerged index entries using resolve-undo data,
recreating conflicted working tree files using unmerged index
entries, and writing data out of unmerged index entries, make
sense only when we are checking paths out of the index and not when
we are checking paths out of a tree-ish.
Add an extra check to make sure "--merge" and "--ours/--theirs"
options are rejected when checking out from a tree-ish, update the
document (especially the SYNOPSIS section) to highlight that they
are incompatible, and add a few tests to make sure the combination
fails.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "update-index --unresolve" is a relatively old feature that was
introduced in Git v1.4.1 (June 2006), which predates the
resolve-undo extension introduced in Git v1.7.0 (February 2010).
The original code that was limited only to work during a merge (and
not during a rebase or a cherry-pick) has been kept as the fallback
codepath to be used as a transition measure.
By now, for more than 10 years we have stored resolve-undo extension
in the index file, and the fallback code way outlived its usefulness.
Remove it, together with two file-scope static global variables.
One of these variables is still used by surviving function, but it
does not have to be a global at all, so move it to local to that
function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"update-index --unresolve" uses the unmerge_index_entry_at() that
assumes that the path to be unresolved must be in the index, which
makes it impossible to unresolve a path that was resolved as removal.
Rewrite unresolve_one() to use the unmerge_index_entry() to support
unresolving such a path.
Existing tests for "update-index --unresolve" forgot to check one
thing that tests for "checkout --merge -- paths" tested, which is to
make sure that resolve-undo record that has already been used to
recreate higher-stage index entries is removed. Add new invocations
of "ls-files --resolve-undo" after running "update-index --unresolve"
to make sure that unresolving with update-index does remove the used
resolve-undo records.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "update-index --unresolve $path" cannot find the resolve-undo
record for the path the user requested to unresolve, it stuffs the
blobs from HEAD and MERGE_HEAD to stage #2 and stage #3 as a
fallback. For this reason, the operation does not even start unless
both "HEAD" and "MERGE_HEAD" exist.
This is suboptimal in a few ways:
* It does not recreate stage #1. Even though it is a correct
design decision not to do so (because it is impossible to
recreate in general cases, without knowing how we got there,
including what merge strategy was used), it is much less useful
not to have that information in the index.
* It limits the "unresolve" operation only during a conflicted "git
merge" and nothing else. Other operations like "rebase",
"cherry-pick", and "switch -m" may result in conflicts, and the
user may want to unresolve the conflict that they incorrectly
resolved in order to redo the resolution, but the fallback would
not kick in.
* Most importantly, the entire "unresolve" operation is disabled
after a conflicted merge is committed and MERGE_HEAD is removed,
even though the index has perfectly usable resolve-undo records.
By lazily reading the HEAD and MERGE_HEAD only when we need to go to
the fallback codepath, we will allow cases where resolve-undo
records are available (which is 100% of the time, unless the user is
reading from an index file created by Git more than 10 years ago) to
proceed even after a conflicted merge was committed, during other
mergy operations that do not use MERGE_HEAD, or after the result of
such mergy operations has been committed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bundle" passes the progress control options to "git pack-objects"
by parsing and then recreating them explicitly. Simplify that process
by using OPT_PASSTHRU_ARGV instead.
This also fixes --no-quiet, which has been doing the same as --quiet
since its introduction by 79862b6b77 (bundle-create: progress output
control, 2019-11-10) because it had been defined using OPT_SET_INT with
a value of 0, which sets 0 when negated as well.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line parser fixes.
* jc/parse-options-show-branch:
show-branch: reject --[no-](topo|date)-order
show-branch: --no-sparse should give dense output
Mark-up unused parameters in the code so that we can eventually
enable -Wunused-parameter by default.
* jk/unused-parameter:
t/helper: mark unused callback void data parameters
tag: mark unused parameters in each_tag_name_fn callbacks
rev-parse: mark unused parameter in for_each_abbrev callback
replace: mark unused parameter in each_mergetag_fn callback
replace: mark unused parameter in ref callback
merge-tree: mark unused parameter in traverse callback
fsck: mark unused parameters in various fsck callbacks
revisions: drop unused "opt" parameter in "tweak" callbacks
count-objects: mark unused parameter in alternates callback
am: mark unused keep_cr parameters
http-push: mark unused parameter in xml callback
http: mark unused parameters in curl callbacks
do_for_each_ref_helper(): mark unused repository parameter
test-ref-store: drop unimplemented reflog-expire command
Help newbies by suggesting that there are cases where force-pushing
is a valid and sensible thing to update a branch at a remote
repository, rather than reconciling with merge/rebase.
* ah/advise-force-pushing:
push: don't imply that integration is always required before pushing
remote: don't imply that integration is always required before pushing
wt-status: don't show divergence advice when committing
Enumerating refs in the packed-refs file, while excluding refs that
match certain patterns, has been optimized.
* tb/refs-exclusion-and-packed-refs:
ls-refs.c: avoid enumerating hidden refs where possible
upload-pack.c: avoid enumerating hidden refs where possible
builtin/receive-pack.c: avoid enumerating hidden references
refs.h: implement `hidden_refs_to_excludes()`
refs.h: let `for_each_namespaced_ref()` take excluded patterns
revision.h: store hidden refs in a `strvec`
refs/packed-backend.c: add trace2 counters for jump list
refs/packed-backend.c: implement jump lists to avoid excluded pattern(s)
refs/packed-backend.c: refactor `find_reference_location()`
refs: plumb `exclude_patterns` argument throughout
builtin/for-each-ref.c: add `--exclude` option
ref-filter.c: parameterize match functions over patterns
ref-filter: add `ref_filter_clear()`
ref-filter: clear reachable list pointers after freeing
ref-filter.h: provide `REF_FILTER_INIT`
refs.c: rename `ref_filter`
Since 99fb6e04cb (pack-objects: convert to use parse_options(),
2012-02-01) git pack-objects has accepted the option --no-quiet, but it
does the same as --quiet. That's because it's defined using OPT_SET_INT
with a value of 0, which sets 0 when negated, too.
Make --no-quiet equivalent to --progress and ignore it if --all-progress
was given.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 99fb6e04cb (pack-objects: convert to use parse_options(),
2012-02-01) git pack-objects has accepted --no-keep-true-parents, but
this option does the same as --keep-true-parents. That's because it's
defined using OPT_SET_INT with a value of 0, which sets 0 when negated
as well.
Turn --no-keep-true-parents into the opposite of --keep-true-parents by
using OPT_BOOL and storing the option's status directly in a variable
named "grafts_keep_true_parents" instead of in negative form in
"grafts_replace_parents".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 2c33f75754 (Teach git-describe --exact-match to avoid expensive
tag searches, 2008-02-24) git describe accepts --no-exact-match, but it
does the same as --exact-match, an alias for --candidates=0. That's
because it's defined using OPT_SET_INT with a value of 0, which sets 0
when negated as well.
Let --no-exact-match set the number of candidates to the default value
instead. Users that need a more specific lack of exactitude can specify
their preferred value using --candidates, as before.
The "--no-exact-match" option was not covered in the tests, so let's
add a few. Also add a case where --exact-match option is used on a
commit that cannot be described without distance from tags and make
sure the command fails.
Signed-off-by: René Scharfe <l.s.r@web.de>
[jc: added trivial tests]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git reset --no-mixed" behaved exactly like "git reset --mixed",
which was nonsense.
If there were only two kinds, e.g. "mixed" vs "separate", it might
have made sense to make "git reset --no-mixed" behave identically to
"git reset --separate" and vice-versa, but because we have many
types of reset, let's just forbid "--no-mixed" and negated form of
other types.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-branch --no-topo-order" behaved exactly the same way as
"git show-branch --topo-order" did, which was nonsense. This was
because we choose between topo- and date- by setting a variable to
either REV_SORT_IN_GRAPH_ORDER or REV_SORT_BY_COMMIT_DATE with
OPT_SET_INT() and REV_SORT_IN_GRAPH_ORDER happens to be 0. The
OPT_SET_INT() macro assigns 0 to the target variable in respose to
the negated form of its option.
"--no-date-order" by luck behaves identically to "--topo-order"
exactly for the same reason, and it sort-of makes sense right now,
but the "sort-of makes sense" will quickly break down once we add a
third way to sort. Not-A may be B when there are only two choices
between A and B, but once your choices become among A, B, and C,
not-A does not mean B.
Just mark these two ordering options to reject negation, and add a
test, which was missing. "git show-branch --no-reflog" is also
unnegatable, so throw in a test for that while we are at it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The help text for the --tags option was split into two option[]
entries, which was a hacky way to give two lines of help text (the
second entry did not have either short or long help, and there was
no way to invoke its entry---it was there only for the help text).
As we now support multi-line text in the option help, let's make
the second line of the help a proper second line and remove the
hacky second entry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-branch --no-sparse" behaved exactly the same way as "git
show-branch --sparse", which did not make any sense. This was
because it used a variable "dense" initialized to 1 by default to
give "non sparse" behaviour, and OPT_SET_INT() to set the varilable
to 0 in response to the "--sparse" option. Unfortunately,
OPT_SET_INT() sets 0 to the given variable when the option is
negated.
Flip the polarity of the variable "dense" by renaming it to "sparse"
and initializing it to 0, and have OPT_SET_INT() set the variable to
1 when "--sparse" is given. This way, "--no-sparse" would set 0 to
the variable and would give us the "dense" behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line option parsing for "git clone", "git fetch", and
"git push" have duplicated implementations of parsing "--ipv4" and
"--ipv6" options, by having two OPT_SET_INT() for "ipv4" and "ipv6".
Introduce a new OPT_IPVERSION() macro and use it in these three
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the command line parser for "git branch --all" forgets to use
PARSE_OPT_NONEG, it accepted "git branch --no-all", and then passed
a nonsense value to the underlying machinery, leading to a fatal
error "filter_refs: invalid type". The "--remotes" option had
exactly the same issue.
Catch the unsupported options early in the option parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line options "--keep-cr" and its negation trigger
OPT_SET_INT_F(PARSE_OPT_NONEG) to set a variable to 1 and 0
respectively. Using OPT_SET_INT() to implement the positive variant
that sets the variable to 1 without specifying PARSE_OPT_NONEG gives
us the negative variant to set it to 0 for free.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 61fdbcf98b (ls-tree: migrate to parse-options, 2009-11-13) git
ls-tree has accepted the option --no-full-name, but it does the same
as --full-name, contrary to convention. That's because it's defined
using OPT_SET_INT with a value of 0, where the negative variant sets
0 as well.
Turn --no-full-name into the opposite of --full-name by using OPT_BOOL
instead and storing the option's status directly in a variable named
"full_name" instead of in negated form in "chomp_prefix".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent change to "git repack" made it react less nicely when a
leftover .idx file that no longer has the corresponding .pack file
in the repository, which has been corrected.
* tb/repack-cleanup:
builtin/repack.c: avoid dir traversal in `collect_pack_filenames()`
builtin/repack.c: only repack `.pack`s that exist
"git fsck --no-progress" still spewed noise from the commit-graph
subsystem, which has been corrected.
* tb/fsck-no-progress:
commit-graph.c: avoid duplicated progress output during `verify`
commit-graph.c: pass progress to `verify_one_commit_graph()`
commit-graph.c: iteratively verify commit-graph chains
commit-graph.c: extract `verify_one_commit_graph()`
fsck: suppress MIDX output with `--no-progress`
fsck: suppress commit-graph output with `--no-progress`
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
We iterate over the set of input tag names using callbacks. But not all
operations need the same inputs, so some parameters go unused (but of
course not the same ones for each operation). Mark the unused ones to
avoid -Wunused-parameter warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to use the "data" parameter in this instance. Let's mark
it to avoid -Wunused-parameter warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't look at the "commit" parameter to our callback, as our
"mergetag_data" pointer contains the original name "ref", which we use
instead. But we can't get rid of it, since other for_each_mergetag
callbacks do use it. Let's mark the parameter to avoid
-Wunused-parameter warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't look at the "flags" parameter, which is natural for something
that is just printing the contents of the replace refs. But let's mark
it to appease -Wunused-parameter.
This probably should have been part of 63e14ee2d6 (refs: mark unused
each_ref_fn parameters, 2022-08-19), but I missed it as this one is a
repo_each_ref_fn, which takes an extra repository argument.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our threeway_callback() does not bother to look at its "n" parameter. It
is static in this file and used only by trivial_merge_trees(), which
always passes 3 trees (hence the name "threeway"). It also does not look
at "dirmask". This is OK, as it handles directories specifically by
looking at the mode bits.
Other traverse_info callbacks need these, so we can't get drop them from
the interface. But let's annotate these ones to avoid complaints from
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few callback functions which are used with the fsck code,
but it's natural that not all callbacks need all parameters. For
reporting, even something as obvious as "the oid of the object which had
a problem" is not always used, as some callers are only checking a
single object in the first place. And for both reporting and walking,
things like void data pointers and the fsck_options aren't always
necessary.
But since each such parameter is used by _some_ callback, we have to
keep them in the interface. Mark the unused ones in specific callbacks
to avoid triggering -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The setup_revision_opt struct has a "tweak" function pointer, which can
be used to adjust parameters after setup_revisions() parses arguments,
but before it finalizes setup. In addition to the rev_info struct, the
callback receives a pointer to the setup_revision_opt, as well.
But none of the existing callbacks looks at the extra "opt" parameter,
leading to -Wunused-parameter warnings.
We could mark it as UNUSED, but instead let's remove it entirely. It's
conceivable that it could be useful for a callback to have access to the
"opt" struct. But in the 13 years that this mechanism has existed,
nobody has used it. So let's just drop it in the name of simplifying.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callbacks to for_each_altodb() get a void data pointer, but we don't
need it here. Mark it as unused to silence -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing the input, we have a "keep_cr" parameter to tell us how to
handle line endings. But this doesn't apply to stgit or hg patches
(which are not mailbox formats where we have to worry about that), so we
ignore the parameter entirely in those functions.
Let's mark these as unused so that -Wunused-parameter does not complain
about them.
Note that we could just drop these parameters entirely. They are
necessary to conform to the mail_conv_fn interface used by
split_mail_conv(), but these two callbacks are the only ones used with
that function. The other formats (which _do_ care about keep_cr) use
split_mail_mbox(). But it's conceivable that we'd eventually add another
format that does care about this option, so let's leave it as part of
the generic interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a narrow but common case, the user is the only author of a branch and
doesn't mind overwriting the corresponding branch on the remote. This
workflow is especially common on GitHub, GitLab, and Gerrit, which keep
a permanent record of every version of a branch that is pushed while a
pull request is open for that branch. On those platforms, force-pushing
is encouraged and is analogous to emailing a new version of a patchset.
When giving advice about divergent branches, tell the user about
`git pull`, but don't unconditionally instruct the user to do it. A less
prescriptive message will help prevent users from thinking that they are
required to create an integrated history instead of simply replacing the
previous history. Also, don't put `git pull` in an awkward
parenthetical, because `git pull` can always be used to reconcile
branches and is the normal way to do so.
Due to the difficulty of knowing which command for force-pushing is best
suited to the user's situation, no specific advice is given about
force-pushing. Instead, the user is directed to the Git documentation to
read about possible ways forward that do not involve integration.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user is in the middle of making a commit, they are not yet at
the point where they are ready to think about integrating their local
branch with the corresponding remote branch or force-pushing over the
remote branch. Don't include advice on how to deal with divergent
branches in the commit template, to avoid giving the impression that the
divergence needs to be dealt with immediately. Similar advice will be
printed when it is most relevant, that is, if the user does try to push
without first reconciling the two branches.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When repacking, the function `collect_pack_filenames()` is responsible
for collecting the set of existing packs in the repository, and
partitioning them into "kept" (if the pack has a ".keep" file or was
given via `--keep-pack`) and "nonkept" (otherwise) lists.
This function comes from the original C port of git-repack.sh from back
in a1bbc6c017 (repack: rewrite the shell script in C, 2013-09-15),
where it first appears as `get_non_kept_pack_filenames()`. At the time,
the implementation was a fairly direct translation from the relevant
portion of git-repack.sh, which looped over the results of
find "$PACKDIR" -type f -name '*.pack'
either ignoring the pack as kept, or adding it to the list of existing
packs.
So the choice to directly translate this function in terms of
`readdir()` in a1bbc6c017 made sense. At the time, it was possible to
refine the C version in terms of packed_git structs, but was never done.
However, manually enumerating a repository's packs via `readdir()` is
confusing and error-prone. It leads to frustrating inconsistencies
between which packs Git considers to be part of a repository (i.e.,
could be found in the list of packs from `get_all_packs()`), and which
packs `collect_pack_filenames()` considers to meet the same criteria.
This bit us in 73320e49ad (builtin/repack.c: only collect fully-formed
packs, 2023-06-07), and again in the previous commit.
Prevent these issues from biting us in the future by implementing the
`collect_pack_filenames()` function by looping over an array of pointers
to `packed_git` structs, ensuring that we use the same criteria to
determine the set of available packs.
One gotcha here is that we have to ignore non-local packs, since the
original version of `collect_pack_filenames()` only looks at the local
pack directory to collect existing packs.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>