The implementation of "git add" has four major codepaths that are mutually
exclusive:
- if "--interactive" or "--patch" is given, spawn "git add--interactive"
and exit without doing anything else. Otherwise things are handled
internally in this C code;
- if "--update" is given, update the modified files and exit without
doing anything else;
- if "--refresh" is given, do refresh and exit without doing anything
else;
- otherwise, find the paths that match pathspecs and stage their
contents.
It led to an unholy mess in the code structure; each of the latter three
codepaths has a separate call to read_cache(), even though they are all
about "read the current index, update it and write it back", and logically
they should read the index once _anyway_.
This cleans up the latter three cases by introducing a pair of helper
variables:
- "add_new_files" is set if we need to scan the working tree for paths
that match the pathspec. This variable is false for "--update" and
"--refresh", because they only work on already tracked files.
- "require_pathspec" is set if the user must give at least one pathspec.
"--update" does not need it but all the other cases do.
This is in preparation for introducing a new option "--all", that does the
equivalent of "git add -u && git add ." (aka "addremove").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option -u stands for --update and it is a good idea to make it clear
especially because this is the only mode of operation of "git add" that
does something different from "adding". Give longer --force synonym to -f
while we are at it as well.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/add-n-u:
Make git add -n and git -u -n output consistent
"git-add -n -u" should not add but just report
Conflicts:
builtin-add.c
builtin-mv.c
cache.h
read-cache.c
Output format from "git add -n $path" lists path to blobs that are going
to be added on a single line, separated with SP. On the other hand, the
suggested "git add -u -n" shows one path per line, like "add '<file>'\n".
Of course, these two are inconsistent.
Plain "git add -n" can afford to only say names of paths, as all it does
is to add (update). However, "git add -u" needs to be able to express
"remove" somehow. So if we need to have them formatted the same way, we
need to unify with the "git add -n -u" format. Incidentally, this is
consistent with how 'update-index' says it.
This changes the output from "git add -n $paths" but as a general
principle, output from Porcelain commands is a fair game for improvements
and not for script consumption.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the programs which used the function (as add_file_to_cache).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When get_pathspec() was originally made absolute-path capable,
we botched the interface to it, without dying inside the function
when given a path that is outside the work tree, and made it the
responsibility of callers to check the condition in a roundabout
way. This is made unnecessary with the previous patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would need to notice and fail if command line had a nonsense pathspec.
Earlier get_pathspec() returned all the inputs including bad ones, but
the new one issues warnings and removes offending ones from its return
value, so the callers need to be adjusted to notice it.
Additional test scripts were initially from Robin Rosenberg, further fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "--patch" option is supplied, the patch_update_cmd() function is
called bypassing the main_loop() and exits.
Seeing as builtin-add is the only caller of git-add--interactive we can
impose a strict requirement on the format of the arguments to avoid
possible ambiguity: an "--" argument must be used whenever any pathspecs
are passed, both with the "--patch" option and without it.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
This fixes the pathspec interactive_add() passes to the underlying
git-add--interactive helper. When the command was run from a
subdirectory, cmd_add() already has gone up to the toplevel of the work
tree, and the helper will be spawned from there. The pathspec given on
the command line from the user needs to be adjusted for this.
This adds "validate_pathspec()" function in the callchain, but it does
not validate yet. The function can be changed to barf if there are
unmatching pathspec given by the user, but that is not strictly
necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier 7c0ab44589 (Teach builtin-add
to pass multiple paths to git-add--interactive) did not allocate enough,
and had unneeded (void*) pointer arithmetic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to use a few functions refactored to use in the built-in
commit series.
* kh/commit: (28 commits)
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
builtin-commit: Clean up an unused variable and a debug fprintf().
Call refresh_cache() when updating the user index for --only commits.
builtin-commit: Add newline when showing which commit was created
builtin-commit: resurrect behavior for multiple -m options
builtin-commit --s: add a newline if the last line was not a S-o-b
builtin-commit: fix --signoff
git status: show relative paths when run in a subdirectory
builtin-commit: Refresh cache after adding files.
builtin-commit: fix reflog message generation
launch_editor(): read the file, even when EDITOR=:
...
This separates the logic to limit the extent of change to the
index by where you are (controlled by "prefix") and what you
specify from the command line (controlled by "pathspec").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of just accepting a single file parameter, git-add now accepts
any number of path parameters, fowarding them to git-add--interactive.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-add-sync-stat:
t2200: test more cases of "add -u"
git-add: make the entry stat-clean after re-adding the same contents
ce_match_stat, run_diff_files: use symbolic constants for readability
Conflicts:
builtin-add.c
Earlier in commit 0781b8a9b2
(add_file_to_index: skip rehashing if the cached stat already
matches), add_file_to_index() were taught not to re-add the path
if it already matches the index.
The change meant well, but was not executed quite right. It
used ie_modified() to see if the file on the work tree is really
different from the index, and skipped adding the contents if the
function says "not modified".
This was wrong. There are three possible comparison results
between the index and the file in the work tree:
- with lstat(2) we _know_ they are different. E.g. if the
length or the owner in the cached stat information is
different from the length we just obtained from lstat(2), we
can tell the file is modified without looking at the actual
contents.
- with lstat(2) we _know_ they are the same. The same length,
the same owner, the same everything (but this has a twist, as
described below).
- we cannot tell from lstat(2) information alone and need to go
to the filesystem to actually compare.
The last case arises from what we call 'racy git' situation,
that can be caused with this sequence:
$ echo hello >file
$ git add file
$ echo aeiou >file ;# the same length
If the second "echo" is done within the same filesystem
timestamp granularity as the first "echo", then the timestamp
recorded by "git add" and the timestamp we get from lstat(2)
will be the same, and we can mistakenly say the file is not
modified. The path is called 'racily clean'. We need to
reliably detect racily clean paths are in fact modified.
To solve this problem, when we write out the index, we mark the
index entry that has the same timestamp as the index file itself
(that is the time from the point of view of the filesystem) to
tell any later code that does the lstat(2) comparison not to
trust the cached stat info, and ie_modified() then actually goes
to the filesystem to compare the contents for such a path.
That's all good, but it should not be used for this "git add"
optimization, as the goal of "git add" is to actually update the
path in the index and make it stat-clean. With the false
optimization, we did _not_ cause any data loss (after all, what
we failed to do was only to update the cached stat information),
but it made the following sequence leave the file stat dirty:
$ echo hello >file
$ git add file
$ echo hello >file ;# the same contents
$ git add file
The solution is not to use ie_modified() which goes to the
filesystem to see if it is really clean, but instead use
ie_match_stat() with "assume racily clean paths are dirty"
option, to force re-adding of such a path.
There was another problem with "git add -u". The codepath
shares the same issue when adding the paths that are found to be
modified, but in addition, it asked "git diff-files" machinery
run_diff_files() function (which is "git diff-files") to list
the paths that are modified. But "git diff-files" machinery
uses the same ie_modified() call so that it does not report
racily clean _and_ actually clean paths as modified, which is
not what we want.
The patch allows the callers of run_diff_files() to pass the
same "assume racily clean paths are dirty" option, and makes
"git-add -u" codepath to use that option, to discover and re-add
racily clean _and_ actually clean paths.
We could further optimize on top of this patch to differentiate
the case where the path really needs re-adding (i.e. the content
of the racily clean entry was indeed different) and the case
where only the cached stat information needs to be refreshed
(i.e. the racily clean entry was actually clean), but I do not
think it is worth it.
This patch applies to maint and all the way up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt: (24 commits)
gc: use parse_options
Fixed a command line option type for builtin-fsck.c
Make builtin-pack-refs.c use parse_options.
Make builtin-name-rev.c use parse_options.
Make builtin-count-objects.c use parse_options.
Make builtin-fsck.c use parse_options.
Update manpages to reflect new short and long option aliases
Make builtin-for-each-ref.c use parse-opts.
Make builtin-symbolic-ref.c use parse_options.
Make builtin-update-ref.c use parse_options
Make builtin-revert.c use parse_options.
Make builtin-describe.c use parse_options
Make builtin-branch.c use parse_options.
Make builtin-mv.c use parse-options
Make builtin-rm.c use parse_options.
Port builtin-add.c to use the new option parser.
parse-options: allow callbacks to take no arguments at all.
parse-options: Allow abbreviated options when unambiguous
Add shortcuts for very often used options.
parse-options: make some arguments optional, add callbacks.
...
Conflicts:
Makefile
builtin-add.c
* kh/commit:
Export rerere() and launch_editor().
Introduce entry point add_interactive and add_files_to_cache
Enable wt-status to run against non-standard index file.
Enable wt-status output to a given FILE pointer.
* maint:
RelNotes-1.5.3.5: describe recent fixes
merge-recursive.c: mrtree in merge() is not used before set
sha1_file.c: avoid gcc signed overflow warnings
Fix a small memory leak in builtin-add
honor the http.sslVerify option in shell scripts
prune_directory and fill_directory allocated one byte per pathspec and never
freed it.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors builtin-add.c a little to provide a unique entry point
for launching git add --interactive, which will be used by
builtin-commit too. If we later want to make add --interactive a
builtin or change how it is launched, we just start from this function.
It also exports the private function update() which is used to
add all modified paths to the index as add_files_to_cache().
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/reset:
Simplify cache API
An additional test for "git-reset -- path"
Make "git reset" a builtin.
Move make_cache_entry() from merge-recursive.c into read-cache.c
Add tests for documented features of "git reset".
An earlier commit fixed type-change case in "git add -u".
This adds a test to make sure we do not introduce regression.
At the same time, it fixes a stupid typo in the error message.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, add_file_to_index() invalidated the path in the cache-tree
but remove_file_from_cache() did not, and the user of the latter
needed to invalidate the entry himself. This led to a few bugs due to
missed invalidate calls already. This patch makes the management of
cache-tree less error prone by making more invalidate calls from lower
level cache API functions.
The rules are:
- If you are going to write the index, you should either maintain
cache_tree correctly.
- If you cannot, alternatively you can remove the entire cache_tree
by calling cache_tree_free() before you call write_cache().
- When you modify the index, cache_tree_invalidate_path() should be
called with the path you are modifying, to discard the entry from
the cache-tree structure.
- The following cache API functions exported from read-cache.c (and
the macro whose names have "cache" instead of "index")
automatically call cache_tree_invalidate_path() for you:
- remove_file_from_index();
- add_file_to_index();
- add_index_entry();
You can modify the index bypassing the above API functions
(e.g. find an existing cache entry from the index and modify it in
place). You need to call cache_tree_invalidate_path() yourself in
such a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the error message seems to imply (at least to me) that only
the listed files were withheld and the rest of the files was added to the
index, even though that's obviously not the case.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage string for the executable was missing --refresh. In
addition, the documentation referred to "file", but the usage string
referred to "filepattern". Updated the documentation to
"filepattern", as git-add does handle patterns.
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-add -u also takes the path limiters, but unlike the
command without the -u option, the code forgot that it
could be invoked from a subdirectory, and did not correctly
handle the prefix.
Signed-off-by: Salikh Zakirov <salikh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This applies to 'maint' to fix a rather serious data corruption
issue. When "git add -u" affects a subdirectory in such a way
that the only changes to its contents are path removals, the
next tree object written out of that index was bogus, as the
remove codepath forgot to invalidate the cache-tree entry.
Reported by Salikh Zakirov.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to refresh only a subset of the project files, based on
the specified pathspecs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling access(p, m) with p == NULL is not specified, so don't do that. On
GNU/Hurd systems doing so will result in a SIGSEGV.
Signed-off-by: Thomas Schwinge <tschwinge@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the code would always set up the excludes, and then manually
pick through the pathspec we were given, assuming that non-added but
existing paths were just ignored. This was mostly correct, but would
erroneously mark a totally empty directory as 'ignored'.
Instead, we now use the collect_ignored option of dir_struct, which
unambiguously tells us whether a path was ignored. This simplifies the
code, and means empty directories are now just not mentioned at all.
Furthermore, we now conditionally ask dir_struct to respect excludes,
depending on whether the '-f' flag has been set. This means we don't have
to pick through the result, checking for an 'ignored' flag; ignored entries
were either added or not in the first place.
We can safely get rid of the special 'ignored' flags to dir_entry, which
were not used anywhere else.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than updating all working tree paths, we limit
ourselves to paths listed on the command line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a shorthand of what "git commit -a" does in preparation
for making a commit, which is:
git diff-files --name-only -z | git update-index --remove -z --stdin
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/index-output:
git-read-tree --index-output=<file>
_GIT_INDEX_OUTPUT: allow plumbing to output to an alternative index file.
Conflicts:
builtin-apply.c
This function was not called "add_file_to_cache()" only because
an ancient program, update-cache, used that name as an internal
function name that does something slightly different. Now that
is gone, we can take over the better name.
The plan is to name all functions that operate on the default
index xxx_cache(). Later patches create a variant of them that
take an explicit parameter xxx_index(), and then turn
xxx_cache() functions into macros that use "the_index".
Signed-off-by: Junio C Hamano <junkio@cox.net>
When defined, this allows plumbing commands that update the
index (add, apply, checkout-index, merge-recursive, mv,
read-tree, rm, update-index, and write-tree) to write their
resulting index to an alternative index file while holding a
lock to the original index file. With this, git-commit that
jumps the index does not have to make an extra copy of the index
file, and more importantly, it can do the update while holding
the lock on the index.
However, I think the interface to let an environment variable
specify the output is a mistake, as shown in the documentation.
If a curious user has the environment variable set to something
other than the file GIT_INDEX_FILE points at, almost everything
will break. This should instead be a command line parameter to
tell these plumbing commands to write the result in the named
file, to prevent stupid mistakes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The way things are set up, you can now pass a "pathspec" to the
"read_directory()" function. If you pass NULL, it acts exactly
like it used to do (read everything). If you pass a non-NULL
pointer, it will simplify it into a "these are the prefixes
without any special characters", and stop any readdir() early if
the path in question doesn't match any of the prefixes.
NOTE! This does *not* obviate the need for the caller to do the *exact*
pathspec match later. It's a first-level filter on "read_directory()", but
it does not do the full pathspec thing. Maybe it should. But in the
meantime, builtin-add.c really does need to do first
read_directory(dir, .., pathspec);
if (pathspec)
prune_directory(dir, pathspec, baselen);
ie the "prune_directory()" part will do the *exact* pathspec pruning,
while the "read_directory()" will use the pathspec just to do some quick
high-level pruning of the directories it will recurse into.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the 'core.excludesfile' configuration variable. This variable can
hold a path to a file containing patterns of file names to exclude from
git-add, like $GIT_DIR/info/exclude. Patterns in the excludes file are used
in addition to those in info/exclude.
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>