When moving a directory onto another with `git mv` various checks are
performed. One of of these validates that the destination is not existing.
When calling `lstat` on the destination path and it fails as the path
doesn't exist, some environments seem to overwrite the passed in
`stat` memory nonetheless (I observed this issue on debian 12 of x86_64,
running on OrbStack on ARM, emulated with Rosetta).
This would affect the code that followed as it would still acccess a now
modified `st` structure, which now seems to contain uninitialized memory.
`S_ISDIR(st_dir_mode)` would then typically return false causing the code
to run into a bad case.
The fix avoids overwriting the existing `st` structure, providing an
alternative that exists only for that purpose.
Note that this patch minimizes complexity instead of stack-frame size.
Signed-off-by: Sebastian Thiel <sebastian.thiel@icloud.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a small helper function called "verbose", with the idea that you
can write:
verbose foo
to get a message to stderr when the "foo" command fails, even if it does
not produce any output itself. This goes back to 8ad1652418 (t5304: use
helper to report failure of "test foo = bar", 2014-10-10). It does work,
but overall it has not been a big success for two reasons:
1. Test writers have to remember to put it there (and the resulting
test code is longer as a result).
2. It doesn't handle the opposite case (we expect "foo" to fail, but
it succeeds), leading to inconsistencies in tests (which you can
see in many hunks of this patch, e.g. ones involving "has_cr").
Most importantly, we added a136f6d8ff (test-lib.sh: support -x option
for shell-tracing, 2014-10-10) at the same time, and it does roughly the
same thing. The output is not quite as succinct as "verbose", and you
have to watch out for stray shell-traces ending up in stderr. But it
solves both of the problems above, and has clearly become the preferred
tool.
Let's consider the "verbose" function a failed experiment and remove the
last few callers (which are all many years old, and have been dwindling
as we remove them from scripts we touch for other reasons). It will be
one less thing for new test writers to see and wonder if they should be
using themselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ls-files recently learned a "--format" option, we can use that
rather than asking for all of "--stage" and then pulling out the bits we
want with "cut". That's simpler and avoids two extra processes (one for
cut, and one for the subshell to hold the intermediate result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally avoid git on the left-hand side of a pipe, because it loses
the exit code of the command (and thus we'd miss things like segfaults
or unexpected failures). In the cases in t7001, we wouldn't expect
failures (they are just inspecting the repository state, and are not the
main point of the test), but it doesn't hurt to be careful.
In all but one case here we're piping "ls-files --stage" to cut off the
pathname (since we compare entries before and after moving). Let's pull
that into a helper function to avoid repeating the slightly awkward
replacement.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test script to verify the presence/absence of files, paths, directories,
symlinks and other features in 'git mv' command are using the command
format:
'test (-e|f|d|h|...)'
Replace them with helper functions of format:
'test_path_is_*'
Replacing idiomatic helper functions:
'! test_path_is_*'
with
'test_path_is_missing'
This uses values of 'test_path_bar' in place of '! test_path_foo' to
bring in the helpful factor of indicating the failure of tests after the
mv command has been used, that is, it echoes if the feature/test_path
exists.
Signed-off-by: Debra Obondo <debraobondo@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Update the stat info of the moved index entry in 'rename_index_entry_at()'
if the entry is up-to-date with the index. Internally, 'git mv' uses
'rename_index_entry_at()' to move the source index entry to the destination.
However, it directly copies the stat info of the original cache entry, which
will not reflect the 'ctime' of the file renaming operation that happened as
part of the move. If a file is otherwise up-to-date with the index, that
difference in 'ctime' will make the entry appear out-of-date until the next
index-refreshing operation (e.g., 'git status').
Some commands, such as 'git reset', use the cached stat information to
determine whether a file is up-to-date; if this information is incorrect,
the command will fail when it should pass. In order to ensure a moved entry
is evaluated as 'up-to-date' when appropriate, refresh the destination index
entry's stat info in 'git mv' if and only if the file is up-to-date.
Note that the test added in 't7001-mv.sh' requires a "sleep 1" to ensure the
'ctime' of the file creation will be definitively older than the 'ctime' of
the renamed file in 'git mv'.
Reported-by: Maximilian Reichel <reichemn@icloud.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 459b8d22e5 (tests: do not borrow from COPYING and README from the
real source, 2015-02-15) tests that used "lib-diff.sh" (called
"diff-lib.sh" then) were made to stop relying on the top-level COPYING
file, but we still had other tests that referenced it.
Let's move them over to use the "COPYING_test_data" utility function
introduced in the preceding commit, and in the case of the one test
that needed the "README" file use a ROT 13 version of that "COPYING"
test data. That test added in afd222967c (Extend testing git-mv for
renaming of subdirectories, 2006-07-26) just needs more test data that's not the same as the "COPYING" test data, so a ROT 13 version will do.
This change removes the last references to ../{README,COPYING} in the
test suite.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test script modernization.
* sv/t7001-modernize:
t7001: use `test` rather than `[`
t7001: use here-docs instead of echo
t7001: put each command on a separate line
t7001: use '>' rather than 'touch'
t7001: avoid using `cd` outside of subshells
t7001: remove whitespace after redirect operators
t7001: modernize subshell formatting
t7001: remove unnecessary blank lines
t7001: indent with TABs instead of spaces
t7001: modernize test formatting
According to Documentation/CodingGuidelines, we should use "test"
rather than "[ ... ]" in shell scripts, so let's replace the
"[ ... ]" with "test" in the t7001 test script.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change from old style to current style by taking advantage of
here-docs instead of echo commands.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modern practice is to avoid multiple commands per line, and
instead place each command on its own line.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `>` rather than `touch` to create an empty file when the
timestamp isn't relevant to the test.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid using `cd` outside of subshells since, if the test fails,
there is no guarantee that the current working directory is the
expected one, which may cause subsequent tests to run in the wrong
directory.
While at it, make some other tests more concise by replacing
simple subshells with `git -C`.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to Documentation/CodingGuidelines, there should be no
whitespace after redirect operators. So, we should remove these
whitespaces after redirect operators.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some test use an old style for formatting subshells:
(command &&
...
Update them to the modern style:
(
command &&
...
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests use a deprecated style in which there are unnecessary
blank lines after the opening quote of the test body and before the
closing quote. So we should remove these unnecessary blank lines.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in this script are formatted using a very old style:
test_expect_success \
'title' \
'body line 1 &&
body line 2'
Update the formatting to the modern style:
test_expect_success 'title' '
body line 1 &&
body line 2
'
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test scripts, the recommended style is, e.g.:
test_expect_success 'name' '
do-something somehow &&
do-some-more testing
'
When using this style, any single quote in the multi-line test section
is actually closing the lone single quotes that surround it.
It can be a non-issue in practice:
test_expect_success 'sed a little' '
sed -e 's/hi/lo/' in >out # "ok": no whitespace in s/hi/lo/
'
Or it can be a bug in the test, e.g., because variable interpolation
happens before the test even begins executing:
v=abc
test_expect_success 'variable interpolation' '
v=def &&
echo '"$v"' # abc
'
Change several such in-test single quotes to use double quotes instead
or, in a few cases, drop them altogether. These were identified using
some crude grepping. We're not fixing any test bugs here, but we're
hopefully making these tests slightly easier to grok and to maintain.
There are legitimate use cases for closing a quote and opening a new
one, e.g., both '\'' and '"'"' can be used to produce a literal single
quote. I'm not touching any of those here.
In t9401, tuck the redirecting ">" to the filename while we're touching
those lines.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git mv' has always complained about renaming a conflicted
file, as it cannot handle multiple index entries for one file.
However, the error message it uses has been the same as the
one for an untracked file:
fatal: not under version control, src=...
which is patently wrong. Distinguish the two cases and
add a test to make sure we produce the correct message.
Signed-off-by: Chris Torek <chris.torek@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
Using 'test_must_be_empty' is preferable to '! test -s', because it
gives a helpful error message if the given file is unexpectedly not
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was basically created by:
sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh
with the following notable exceptions:
- The '! test -s' check in '.gitmodules ignore=dirty suppresses
submodules with untracked content' in 't7508-status.sh' is left
as-is, because it's bogus and, therefore, it's subject of a
dedicated patch.
- The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and
't9135-git-svn-moved-branch-empty-file.sh' are immediately
preceeded by a 'test -f' to ensure that the files exist in the
first place. 'test_must_be_empty' ensures that as well, so those
'test -f' commands are removed as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Moving a submodule that itself has submodule in it with "git mv"
forgot to make necessary adjustment to the nested sub-submodules;
now the codepath learned to recurse into the submodules.
* sb/submodule-move-nested:
submodule: fixup nested submodules after moving the submodule
submodule-config: remove submodule_from_cache
submodule-config: add repository argument to submodule_from_{name, path}
submodule-config: allow submodule_free to handle arbitrary repositories
grep: remove "repo" arg from non-supporting funcs
submodule.h: drop declaration of connect_work_tree_and_git_dir
connect_work_tree_and_git_dir is used to connect a submodule worktree with
its git directory and vice versa after events that require a reconnection
such as moving around the working tree. As submodules can have nested
submodules themselves, we'd also want to fix the nested submodules when
asked to. Add an option to recurse into the nested submodules and connect
them as well.
As submodules are identified by their name (which determines their git
directory in relation to their superproject's git directory) internally
and by their path in the working tree of the superproject, we need to
make sure that the mapping of name <-> path is kept intact. We can do
that in the git-mv command by writing out the gitmodules file first
and then forcing a reload of the submodule config machinery.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid using pipes downstream of Git commands since the exit codes
of commands upstream of pipes get swallowed, thus potentially
hiding failure of those commands. Instead, capture Git command
output to a file and apply the downstream command(s) to that file.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that "git mv --dry-run" does not move file.
Signed-off-by: Stefan Moch <stefanmoch@mail.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All other error messages in the file use quotes around the file name.
This change removes two translations as "could not write to '%s'" and
"could not close '%s'" are already translated and these two are the only
occurrences without quotes.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
[jc: adjusted tests I noticed were broken by the change]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the argument order for test_cmp. When given the expected
result first the diff shows the actual output with '+' and the
expectation with '-', which is the convention for our tests.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-mv with a submodule it will detect that and update the
paths for its configurations (.gitmodules, worktree and gitfile). This
does not work for recursive submodules where a user renames the root
submodule.
We discovered this fact when working on on-demand fetch for renamed
submodules. Lets add a test to document.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mv old new" did not adjust the path for a submodule that lives
as a subdirectory inside old/ directory correctly.
* sb/mv-submodule-fix:
mv: allow moving nested submodules
When directories are moved using `git mv` all files in the directory
have been just moved, but no further action was taken on them. This
was done by assigning the mode = WORKING_DIRECTORY to the files
inside a moved directory.
submodules however need to update their link to the git directory as
well as updates to the .gitmodules file. By removing the condition of
`mode != INDEX` (the remaining modes are BOTH and WORKING_DIRECTORY) for
the required submodule actions, we perform these for submodules in a
moved directory.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows repository browsers like GitHub to display the content of
the file nicely formatted.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests that predate the "verbose" helper function use a
pattern like:
test ... || {
echo ...
false
}
to give more verbose output. Using the helper, we can do
this with a single line, and avoid a || which interacts
badly with &&-chaining (besides fooling --chain-lint, we hit
the error block no matter which command in the chain failed,
so we may often show useless results).
In most cases, the messages printed by "verbose" are equally
good (in some cases better; t6006 accidentally redirects the
message to a file!). The exception is t7001, whose output
suffers slightly. However, it's still enough to show the
user which part failed, given that we will have just printed
the test script to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for 'git mv moves a submodule' functionality often run
commands like
git mv sub mod/sub
to move a submodule into a subdirectory. Just like plain /bin/mv,
this is supposed to succeed if the mod/ parent directory exists
and fail if it doesn't exist.
Usually these tests mkdir the parent directory beforehand, but some
instead rely on it being left behind by previous tests.
More precisely, when 'git reset --hard' tries to move to a state where
mod/sub is not present any more, it would perform the following
operations:
rmdir("mod/sub")
rmdir("mod")
The first fails with ENOENT because the test script removed mod/sub
with "rm -rf" already, so 'reset --hard' doesn't bother to move on to
the second, and the mod/ directory is kept around.
Better to explicitly remove and re-create the mod/ directory so later
tests don't have to depend on the directory left behind by the earlier
ones at all (making it easier to rearrange or skip some tests in the
file or to tweak 'reset --hard' behavior without breaking unrelated
tests).
Noticed while testing a patch that fixes the reset --hard behavior
described above.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 11502468 and 04c1ee57 (both first appearing in v1.8.5), the
t7001-mv test has used "cp -a" to perform a copy in several of the
tests.
However, the "-a" option is not required for a POSIX cp utility and
some platforms' cp utilities do not support it.
The POSIX equivalent of -a is -R -P -p.
Change "cp -a" to "cp -R -P -p" so that the t7001-mv test works
on systems with a cp utility that only implements the POSIX
required set of options and not the "-a" option.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AIX doesn't make a distiction between EEXIST and ENOTEMPTY; relying
on the strerror string for the rmdir failure is fragile. Just test
that the start of the string matches the Git controlled "failed to
rmdir..." error. The exact text of the OS generated error string
isn't important to the test.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mv" that moves a submodule forgot to adjust the array that uses
to keep track of which submodules were to be moved to update its
configuration.
* jk/mv-submodules-fix:
mv: prevent mismatched data when ignoring errors.
builtin/mv: fix out of bounds write
We shrink the source and destination arrays, but not the modes or
submodule_gitfile arrays, resulting in potentially mismatched data. Shrink
all the arrays at the same time to prevent this. Add tests to ensure the
problem does not recur.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Submodules" section of the "git mv" documentation mentions what will
happen when a submodule with a gitfile gets moved with newer git. But it
doesn't talk about what happens when the user changes between commits
before and after the move, which does not update the work tree like using
the mv command did the first time.
Explain what happens and what the user has to do manually to fix that in
the new BUGS section. Also document this behavior in a new test.
Reported-by: George Papanikolaou <g3orge.app@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
