Some rough edges in the sparse-checkout feature, especially around
the cone mode, have been cleaned up.
* ds/sparse-checkout-harden:
sparse-checkout: fix cone mode behavior mismatch
sparse-checkout: improve docs around 'set' in cone mode
sparse-checkout: escape all glob characters on write
sparse-checkout: use C-style quotes in 'list' subcommand
sparse-checkout: unquote C-style strings over --stdin
sparse-checkout: write escaped patterns in cone mode
sparse-checkout: properly match escaped characters
sparse-checkout: warn on globs in cone patterns
sparse-checkout: detect short patterns
sparse-checkout: cone mode does not recognize "**"
sparse-checkout: fix documentation typo for core.sparseCheckoutCone
clone: fix --sparse option with URLs
sparse-checkout: create leading directories
t1091: improve here-docs
t1091: use check_files to reduce boilerplate
Traditionally, we avoided threaded grep while searching in objects
(as opposed to files in the working tree) as accesses to the object
layer is not thread-safe. This limitation is getting lifted.
* mt/threaded-grep-in-object-store:
grep: use no. of cores as the default no. of threads
grep: move driver pre-load out of critical section
grep: re-enable threads in non-worktree case
grep: protect packed_git [re-]initialization
grep: allow submodule functions to run in parallel
submodule-config: add skip_if_read option to repo_read_gitmodules()
grep: replace grep_read_mutex by internal obj read lock
object-store: allow threaded access to object reading
replace-object: make replace operations thread-safe
grep: fix racy calls in grep_objects()
grep: fix race conditions at grep_submodule()
grep: fix race conditions on userdiff calls
The code recently added in this release to move to the entry beyond
the ones in the same directory in the index in the sparse-cone mode
did not count the number of entries to skip over incorrectly, which
has been corrected.
* ds/sparse-cone:
.mailmap: fix GGG authoship screwup
unpack-trees: correctly compute result count
The code that tries to skip over the entries for the paths in a
single directory using the cache-tree was not careful enough
against corrupt index file.
* es/unpack-trees-oob-fix:
unpack-trees: watch for out-of-range index position
The intention of the special "cone mode" in the sparse-checkout
feature is to always match the same patterns that are matched by the
same sparse-checkout file as when cone mode is disabled.
When a file path is given to "git sparse-checkout set" in cone mode,
then the cone mode improperly matches the file as a recursive path.
When setting the skip-worktree bits, files were not expecting the
MATCHED_RECURSIVE response, and hence these were left out of the
matched cone.
Fix this bug by checking for MATCHED_RECURSIVE in addition to MATCHED
and add a test that prevents regression.
Reported-by: Finn Bryant <finnbryant@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code recently added in this release to move to the entry beyond
the ones in the same directory in the index in the sparse-cone mode
did not count the number of entries to skip over incorrectly, which
has been corrected.
* ds/sparse-cone:
.mailmap: fix GGG authoship screwup
unpack-trees: correctly compute result count
The Undefined Behavior Sanitizer in clang-11 seems to have learned a new
trick: it complains about computing offsets from a NULL pointer, even if
that offset is 0. This causes numerous test failures. For example, from
t1090:
unpack-trees.c:1355:41: runtime error: applying zero offset to null pointer
...
not ok 6 - in partial clone, sparse checkout only fetches needed blobs
The code in question looks like this:
struct cache_entry **cache_end = cache + nr;
...
while (cache != cache_end)
and we sometimes pass in a NULL and 0 for "cache" and "nr". This is
conceptually fine, as "cache_end" would be equal to "cache" in this
case, and we wouldn't enter the loop at all. But computing even a zero
offset violates the C standard. And given the fact that UBSan is
noticing this behavior, this might be a potential problem spot if the
compiler starts making unexpected assumptions based on undefined
behavior.
So let's just avoid it, which is pretty easy. In some cases we can just
switch to iterating with a numeric index (as we do in sequencer.c here).
In other cases (like the cache_end one) the use of an end pointer is
more natural; we can keep that by just explicitly checking for the
NULL/0 case when assigning the end pointer.
Note that there are two ways you can write this latter case, checking
for the pointer:
cache_end = cache ? cache + nr : cache;
or the size:
cache_end = nr ? cache + nr : cache;
For the case of a NULL/0 ptr/len combo, they are equivalent. But writing
it the second way (as this patch does) has the property that if somebody
were to incorrectly pass a NULL pointer with a non-zero length, we'd
continue to notice and segfault, rather than silently pretending the
length was zero.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that tries to skip over the entries for the paths in a
single directory using the cache-tree was not careful enough
against corrupt index file.
* es/unpack-trees-oob-fix:
unpack-trees: watch for out-of-range index position
Currently, submodule-config.c doesn't have an externally accessible
function to read gitmodules only if it wasn't already read. But this
exact behavior is internally implemented by gitmodules_read_check(), to
perform a lazy load. Let's merge this function with
repo_read_gitmodules() adding a 'skip_if_read' which allows both
internal and external callers to access this functionality. This
simplifies a little the code. The added option will also be used in
the following patch.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The clear_ce_flags_dir() method processes the cache entries within
a common directory. The returned int is the number of cache entries
processed by that directory. When using the sparse-checkout feature
in cone mode, we can skip the pattern matching for entries in the
directories that are entirely included or entirely excluded.
eb42feca (unpack-trees: hash less in cone mode, 2019-11-21)
introduced this performance feature. The old mechanism relied on
the counts returned by calling clear_ce_flags_1(), but the new
mechanism calculated the number of rows by subtracting "cache_end"
from "cache" to find the size of the range. However, the equation
is wrong because it divides by sizeof(struct cache_entry *). This
is not how pointer arithmetic works!
A coverity build of Git for Windows in preparation for the 2.25.0
release found this issue with the warning, "Pointer differences,
such as cache_end - cache, are automatically scaled down by the
size (8 bytes) of the pointed-to type (struct cache_entry *).
Most likely, the division by sizeof(struct cache_entry *) is
extraneous and should be eliminated." This warning is correct.
This leaves us with the question "how did this even work?" The
problem that occurs with this incorrect pointer arithmetic is
a performance-only bug, and a very slight one at that. Since
the entry count returned by clear_ce_flags_dir() is reduced by
a factor of 8, the loop in clear_ce_flags_1() will re-process
entries from those directories.
By inserting global counters into unpack-tree.c and tracing
them with trace2_data_intmax() (in a private change, for
testing), I was able to see count how many times the loop inside
clear_ce_flags_1() processed an entry and how many times
clear_ce_flags_dir() was called. Each of these are reduced by at
least a factor of 8 with the current change. A factor larger
than 8 happens when multiple levels of directories are repeated.
Specifically, in the Linux kernel repo, the command
git sparse-checkout set LICENSES
restricts the working directory to only the files at root and
in the LICENSES directory. Here are the measured counts:
clear_ce_flags_1 loop blocks:
Before: 11,520
After: 1,621
clear_ce_flags_dir calls:
Before: 7,048
After: 606
While these are dramatic counts, the time spent in
clear_ce_flags_1() is under one millisecond in each case, so
the improvement is not measurable as an end-to-end time.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible in a case where the index file contains a tree extension
but no blobs within that tree exist for index_pos_by_traverse_info() to
segfault. If the name_entry passed into index_pos_by_traverse_info() has
no blobs inside, AND is alphabetically later than all blobs currently in
the index file, index_pos_by_traverse_info() will segfault. For example,
an index file which looks something like this:
aaa#0
bbb/aaa#0
[Extensions]
TREE: zzz
In this example, 'index_name_pos(..., "zzz/", ...)' will return '-4',
indicating that "zzz/" could be inserted at position 3. However, when
the checks which ensure that the insertion position of "zzz/" look for a
blob at that position beginning with "zzz/", the index cache is accessed
out of range, causing a segfault.
This kind of index state is not typically generated during user
operations, and is in fact an edge case of the state being checked for
in the conditional where it was added. However, since the entry for the
BUG() line is ambiguous, tell some additional context to help Git
developers debug the failure later. When we know the name of the dir we
were trying to look up, it becomes possible to examine the index file
in a hex util to determine what went wrong; the position gives a hint
about where to start looking.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_updates() has a lot of code that repeatedly checks whether
o->update or o->dry_run are set. (Note that o->dry_run is a
near-synonym for !o->update, but not quite as per commit 2c9078d05b
("unpack-trees: add the dry_run flag to unpack_trees_options",
2011-05-25).) In fact, this function almost turns into a no-op whenever
the condition
!o->update || o->dry_run
is met. Simplify the code by checking this condition at the beginning
of the function, and when it is true, do the few things that are
relevant and return early.
There are a few things that make the conversion not quite obvious:
* The fact that check_updates() does not actually turn into a no-op
when updates are not wanted may be slightly surprising. However,
commit 33ecf7eb61 (Discard "deleted" cache entries after using them
to update the working tree, 2008-02-07) put the discarding of
unused cache entries in check_updates() so we still need to keep
the call to remove_marked_cache_entries(). It's possible this
call belongs in another function, but it is certainly needed as
tests will fail if it is removed.
* The original called remove_scheduled_dirs() unconditionally.
Technically, commit 7847892716 (unlink_entry(): introduce
schedule_dir_for_removal(), 2009-02-09) should have made that call
conditional, but it didn't matter in practice because
remove_scheduled_dirs() becomes a no-op when all the calls to
unlink_entry() are skipped. As such, we do not need to call it.
* When (o->dry_run && o->update), the original would have two calls
to git_attr_set_direction() surrounding a bunch of skipped updates.
These two calls to git_attr_set_direction() cancel each other out
and thus can be omitted when o->dry_run is true just as they
already are when !o->update.
* The code would previously call setup_collided_checkout_detection()
and report_collided_checkout() even when o->dry_run. However, this
was just an expensive no-op because
setup_collided_checkout_detection() merely cleared the CE_MATCHED
flag for each cache entry, and report_collided_checkout() reported
which ones had it set. Since a dry-run would skip all the
checkout_entry() calls, CE_MATCHED would never get set and thus
no collisions would be reported. Since we can't detect the
collisions anyway without doing updates, skipping the collisions
detection setup and reporting is an optimization.
* The code previously would call get_progress() and
display_progress() even when (!o->update || o->dry_run). This
served to show how long it took to skip all the updates, which is
somewhat useless. Since we are skipping the updates, we can skip
showing how long it takes to skip them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
* maint-2.22: (43 commits)
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
...
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
* maint-2.16: (31 commits)
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
...
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
Users of oneway_merge() (like "reset --hard") learned to take
advantage of fsmonitor to avoid unnecessary lstat(2) calls.
* us/unpack-trees-fsmonitor:
unpack-trees: skip stat on fsmonitor-valid files
A `git clone` will end with exit code 0 when `merged_entry()` returns a
positive value during a call of `unpack_trees()` to `traverse_trees()`.
The reason is that `unpack_trees()` will interpret a positive value not
to be an error.
The problem is, however, that `add_index_entry()` (which is called by
`merged_entry()` can report an error, and we really should fail the
entire clone in such a case.
Let's fix this problem, in preparation for a Windows-specific patch
disallowing `mkdir()` with directory names that contain a trailing space
(which is illegal on NTFS): we want `git clone` to abort when a path
cannot be checked out due to that condition.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The sparse-checkout builtin used 'git read-tree -mu HEAD' to update the
skip-worktree bits in the index and to update the working directory.
This extra process is overly complex, and prone to failure. It also
requires that we write our changes to the sparse-checkout file before
trying to update the index.
Remove this extra process call by creating a direct call to
unpack_trees() in the same way 'git read-tree -mu HEAD' does. In
addition, provide an in-memory list of patterns so we can avoid
reading from the sparse-checkout file. This allows us to test a
proposed change to the file before writing to it.
An earlier version of this patch included a bug when the 'set' command
failed due to the "Sparse checkout leaves no entry on working directory"
error. It would not rollback the index.lock file, so the replay of the
old sparse-checkout specification would fail. A test in t1091 now
covers that scenario.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a large repository has many sparse-checkout patterns, the
process for updating the skip-worktree bits can take long enough
that a user gets confused why nothing is happening. Update the
clear_ce_flags() method to write progress.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature in "cone mode" can use the fact that
the recursive patterns are "connected" to the root via parent
patterns to decide if a directory is entirely contained in the
sparse-checkout or entirely removed.
In these cases, we can skip hashing the paths within those
directories and simply set the skipworktree bit to the correct
value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parent and recursive patterns allowed by the "cone mode"
option in sparse-checkout are restrictive enough that we
can avoid using the regex parsing. Everything is based on
prefix matches, so we can use hashsets to store the prefixes
from the sparse-checkout file. When checking a path, we can
strip path entries from the path and check the hashset for
an exact match.
As a test, I created a cone-mode sparse-checkout file for the
Linux repository that actually includes every file. This was
constructed by taking every folder in the Linux repo and creating
the pattern pairs here:
/$folder/
!/$folder/*/
This resulted in a sparse-checkout file sith 8,296 patterns.
Running 'git read-tree -mu HEAD' on this file had the following
performance:
core.sparseCheckout=false: 0.21 s (0.00 s)
core.sparseCheckout=true: 3.75 s (3.50 s)
core.sparseCheckoutCone=true: 0.23 s (0.01 s)
The times in parentheses above correspond to the time spent
in the first clear_ce_flags() call, according to the trace2
performance traces.
While this example is contrived, it demonstrates how these
patterns can slow the sparse-checkout feature.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git updates the working directory with the sparse-checkout
feature enabled, the unpack_trees() method calls clear_ce_flags()
to update the skip-wortree bits on the cache entries. This
check can be expensive, depending on the patterns used.
Add trace2 regions around the method, including some flag
information, so we can get granular performance data during
experiments. This data will be used to measure improvements
to the pattern-matching algorithms for sparse-checkout.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index might be aware that a file hasn't modified via fsmonitor, but
unpack-trees did not pay attention to it and checked via ie_match_stat
which can be inefficient on certain filesystems. This significantly slows
down commands that run oneway_merge, like checkout and reset --hard.
This patch makes oneway_merge check whether a file is considered
unchanged through fsmonitor and skips ie_match_stat on it. unpack-trees
also now correctly copies over fsmonitor validity state from the source
index. Finally, for correctness, we force a refresh of fsmonitor state in
tweak_fsmonitor.
After this change, commands like stash (that use reset --hard
internally) go from 8s or more to ~2s on a 250k file repository on a
mac.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Utsav Shah <utsav@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal code originally invented for ".gitignore" processing
got reshuffled and renamed to make it less tied to "excluding" and
stress more that it is about "matching", as it has been reused for
things like sparse checkout specification that want to check if a
path is "included".
* ds/include-exclude:
unpack-trees: rename 'is_excluded_from_list()'
treewide: rename 'exclude' methods to 'pattern'
treewide: rename 'EXCL_FLAG_' to 'PATTERN_FLAG_'
treewide: rename 'struct exclude_list' to 'struct pattern_list'
treewide: rename 'struct exclude' to 'struct path_pattern'
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
Now that this library is renamed to use 'struct pattern_list'
and 'struct pattern', we can now rename the method used by
the sparse-checkout feature to determine which paths should
appear in the working directory.
The method is_excluded_from_list() is only used by the
sparse-checkout logic in unpack-trees and list-objects-filter.
The confusing part is that it returned 1 for "excluded" (i.e.
it matches the list of exclusions) but that really manes that
the path matched the list of patterns for _inclusion_ in the
working directory.
Rename the method to be path_matches_pattern_list() and have
it return an explicit 'enum pattern_match_result'. Here, the
values MATCHED = 1, UNMATCHED = 0, and UNDECIDED = -1 agree
with the previous integer values. This shift allows future
consumers to better understand what the retur values mean,
and provides more type checking for handling those values.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames several methods defined in dir.h to make
more sense with the renamed 'struct exclude_list' to 'struct
pattern_list' and 'struct exclude' to 'struct path_pattern':
* last_exclude_matching() -> last_matching_pattern()
* parse_exclude() -> parse_path_pattern()
In addition, the word 'exclude' was replaced with 'pattern'
in the methods below:
* add_exclude_list()
* add_excludes_from_file_to_list()
* add_excludes_from_file()
* add_excludes_from_blob_to_list()
* add_exclude()
* clear_exclude_list()
A few methods with the word "exclude" remain. These will
be handled seperately. In particular, the method
"is_excluded()" is concretely about the .gitignore file
relative to a specific directory. This is the important
boundary between library and consumer: is_excluded() cares
about .gitignore, but is_excluded() calls
last_matching_pattern() to make that decision.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames 'struct exclude_list' to 'struct pattern_list'
and renames several variables called 'el' to 'pl'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codepaths to walk tree objects have been audited for integer
overflows and hardened.
* jk/tree-walk-overflow:
tree-walk: harden make_traverse_path() length computations
tree-walk: add a strbuf wrapper for make_traverse_path()
tree-walk: accept a raw length for traverse_path_len()
tree-walk: use size_t consistently
tree-walk: drop oid from traverse_info
setup_traverse_info(): stop copying oid
The make_traverse_path() function isn't very careful about checking its
output buffer boundaries. In fact, it doesn't even _know_ the size of
the buffer it's writing to, and just assumes that the caller used
traverse_path_len() correctly. And even then we assume that our
traverse_info.pathlen components are all correct, and just blindly write
into the buffer.
Let's improve this situation a bit:
- have the caller pass in their allocated buffer length, which we'll
check against our own computations
- check for integer underflow as we do our backwards-insertion of
pathnames into the buffer
- check that we do not run out items in our list to traverse before
we've filled the expected number of bytes
None of these should be triggerable in practice (especially since our
switch to size_t everywhere in a previous commit), but it doesn't hurt
to check our assumptions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All but one of the callers of make_traverse_path() allocate a new heap
buffer to store the path. Let's give them an easy way to write to a
strbuf, which saves them from computing the length themselves (which is
especially tricky when they want to add to the path). It will also make
it easier for us to change the make_traverse_path() interface in a
future patch to improve its bounds-checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We take a "struct name_entry", but only care about the length of the
path name. Let's just take that length directly, making it easier to use
the function from callers that sometimes do not have a name_entry at
all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We store and manipulate the cumulative traverse_info.pathlen as an
"int", which can overflow when we are fed ridiculously long pathnames
(e.g., ones at the edge of 2GB or 4GB, even if the individual tree entry
names are smaller than that). The results can be confusing, though
after some prodding I was not able to use this integer overflow to cause
an under-allocated buffer.
Let's consistently use size_t to generate and store these, and make
sure our addition doesn't overflow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the previous commit shows, the presence of an oid in each level of
the traverse_info is confusing and ultimately not necessary. Let's drop
it to make it clear that it will not always be set (as well as convince
us that it's unused, and let the compiler catch any merges with other
branches that do add new uses).
Since the oid is part of name_entry, we'll actually stop embedding a
name_entry entirely, and instead just separately hold the pathname, its
length, and the mode.
This makes the resulting code slightly more verbose as we have to pass
those elements around individually. But it also makes it more clear what
each code path is going to use (and in most of the paths, we really only
care about the pathname itself).
A few of these conversions are noisier than they need to be, as they
also take the opportunity to rename "len" to "namelen" for clarity
(especially where we also have "pathlen" or "ce_len" alongside).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tree-walk API learned to pass an in-core repository
instance throughout more codepaths.
* nd/tree-walk-with-repo:
t7814: do not generate same commits in different repos
Use the right 'struct repository' instead of the_repository
match-trees.c: remove the_repo from shift_tree*()
tree-walk.c: remove the_repo from get_tree_entry_follow_symlinks()
tree-walk.c: remove the_repo from get_tree_entry()
tree-walk.c: remove the_repo from fill_tree_descriptor()
sha1-file.c: remove the_repo from read_object_with_reference()
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
While at there, clean up the_repo usage in builtin/merge-tree.c a tiny
bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the repository_format_partial_clone global
and fetch_objects() directly, let's use has_promisor_remote()
and promisor_remote_get_direct().
This way all the configured promisor remotes will be taken
into account, not only the one specified by
extensions.partialClone.
Also when cloning or fetching using a partial clone filter,
remote.origin.promisor will be set to "true" instead of
setting extensions.partialClone to "origin". This makes it
possible to use many promisor remote just by fetching from
them.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While running "git diff" in a lazy clone, we can upfront know which
missing blobs we will need, instead of waiting for the on-demand
machinery to discover them one by one. Aim to achieve better
performance by batching the request for these promised blobs.
* jt/batch-fetch-blobs-in-diff:
diff: batch fetching of missing blobs
sha1-file: support OBJECT_INFO_FOR_PREFETCH
"git checkout -m <other>" was about carrying the differences
between HEAD and the working-tree files forward while checking out
another branch, and ignored the differences between HEAD and the
index. The command has been taught to abort when the index and the
HEAD are different.
* nd/checkout-m:
checkout: prevent losing staged changes with --merge
read-tree: add --quiet
unpack-trees: rename "gently" flag to "quiet"
unpack-trees: keep gently check inside add_rejected_path
Code cleanup.
* jk/unused-params-even-more:
parse_opt_ref_sorting: always use with NONEG flag
pretty: drop unused strbuf from parse_padding_placeholder()
pretty: drop unused "type" parameter in needs_rfc2047_encoding()
parse-options: drop unused ctx parameter from show_gitcomp()
fetch_pack(): drop unused parameters
report_path_error(): drop unused prefix parameter
unpack-trees: drop unused error_type parameters
unpack-trees: drop name_entry from traverse_by_cache_tree()
test-date: drop unused "now" parameter from parse_dates()
update-index: drop unused prefix_length parameter from do_reupdate()
log: drop unused "len" from show_tagger()
log: drop unused rev_info from early output
revision: drop some unused "revs" parameters
A new hook "post-index-change" is called when the on-disk index
file changes, which can help e.g. a virtualized working tree
implementation.
* bp/post-index-change-hook:
read-cache: add post-index-change hook
The new command "git switch" is added to avoid the confusion of
one-command-do-all "git checkout" for new users. They are also helpful
to avoid ambiguation context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands...
The "Checking out files" progress line in unpack-trees.c is also updated
to "Updating files" to be neutral to both git-checkout and git-switch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach oid_object_info_extended() to support a new flag that inhibits
fetching of missing objects. This is equivalent to setting
fetch_is_missing to 0, calling oid_object_info_extended(), then setting
fetch_if_missing to whatever it was before. Update unpack-trees.c to use
this new flag instead of repeatedly setting fetch_if_missing.
This new flag complicates things slightly in that there are now 2 ways
to do the same thing. But this eliminates the need to repeatedly set a
global variable, and more importantly, allows prefetching to be done in
parallel (in the future); hence, this patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gently flag was added in 17e4642667 (Add flag to make unpack_trees()
not print errors. - 2008-02-07) to suppress error messages. The name
"gently" does not quite express that. Granted, being quiet is gentle but
it could mean not performing some other actions. Rename the flag to
"quiet" to be more on point.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This basically follows the footsteps of 6a143aa2b2 (checkout -m:
attempt merge when deletion of path was staged - 2014-08-12) where
there gently check is moved inside reject_merge() so that callers do
not accidentally forget it.
add_rejected_path() has the same usage pattern. All call sites check
gently first, then decide to call add_rejected_path() if needed. Move
the check inside.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip found out that 'git checkout -f <branch>' does not restore
conflict/unmerged files correctly. All tracked files should be taken
from <branch> and all non-zero stages removed. Most of this is true,
except that the final file could be in stage one instead of zero.
"checkout -f" (among other commands) does this with one-way merge, which
is supposed to take stat info from the index and everything else from
the given tree. The add_entry(.., old, ...) call in oneway_merge()
though will keep stage index from the index.
This is normally not a problem if the entry from the index is
normal (stage #0). But if there is a conflict, stage #0 does not exist
and we'll get stage #1 entry as "old" variable, which gets recorded in
the final index. Fix it by clearing stage mask.
This bug probably comes from b5b425074e (git-read-tree: make one-way
merge also honor the "update" flag, 2005-06-07). Before this commit, we
may create the final ("dst") index entry from the one in index, but we
do clear CE_STAGEMASK.
I briefly checked two- and three-way merge functions. I think we don't
have the same problem in those.
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The verify_clean_subdirectory() helper takes an error_type parameter
from the caller, but doesn't actually use it. Instead, when it calls
add_rejected_path() it passes NOT_UPTODATE_DIR, its own custom error
type which is more specific than what the caller provides. Likewise for
verify_clean_submodule(), which always passes WOULD_LOSE_SUBMODULE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pull the names from the existing index rather than the tree entry,
which is after all the point of this function. Let's drop the unused
"names" parameter.
Note that we leave the "nr_names" parameter, as it tells us how many
trees we are traversing (and thus how many index stages to set up).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout --no-overlay" can be used to trigger a new mode of
checking out paths out of the tree-ish, that allows paths that
match the pathspec that are in the current index and working tree
and are not in the tree-ish.
* tg/checkout-no-overlay:
revert "checkout: introduce checkout.overlayMode config"
checkout: introduce checkout.overlayMode config
checkout: introduce --{,no-}overlay option
checkout: factor out mark_cache_entry_for_checkout function
checkout: clarify comment
read-cache: add invalidate parameter to remove_marked_cache_entries
entry: support CE_WT_REMOVE flag in checkout_entry
entry: factor out unlink_entry function
move worktree tests to t24*
Add a post-index-change hook that is invoked after the index is written in
do_write_locked_index().
This hook is meant primarily for notification, and cannot affect
the outcome of git commands that trigger the index write.
The hook is passed a flag to indicate whether the working directory was
updated or not and a flag indicating if a skip-worktree bit could have
changed. These flags enable the hook to optimize its response to the
index change notification.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.
* bc/tree-walk-oid:
cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
tree-walk: store object_id in a separate member
match-trees: use hashcpy to splice trees
match-trees: compute buffer offset correctly when splicing
tree-walk: copy object ID before use
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a tree, we read the object ID directly out of the tree
buffer. This is normally fine, but such an object ID cannot be used with
oidcpy, which copies GIT_MAX_RAWSZ bytes, because if we are using SHA-1,
there may not be that many bytes to copy.
Instead, store the object ID in a separate struct member. Since we can
no longer efficiently compute the path length, store that information as
well in struct name_entry. Ensure we only copy the object ID into the
new buffer if the path length is nonzero, as some callers will pass us
an empty path with no object ID following it, and we will not want to
read past the end of the buffer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout [<tree-ish>] path..." learned to report the number of
paths that have been checked out of the index or the tree-ish,
which gives it the same degree of noisy-ness as the case in which
the command checks out a branch.
* nd/checkout-noisy:
t0027: squelch checkout path run outside test_expect_* block
checkout: print something when checking out paths
The traversal over tree objects has learned to honor
":(attr:label)" pathspec match, which has been implemented only for
enumerating paths on the filesystem.
* nd/attr-pathspec-in-tree-walk:
tree-walk: support :(attr) matching
dir.c: move, rename and export match_attrs()
pathspec.h: clean up "extern" in function declarations
tree-walk.c: make tree_entry_interesting() take an index
tree.c: make read_tree*() take 'struct repository *'
When marking cache entries for removal, and later removing them all at
once using 'remove_marked_cache_entries()', cache entries currently
have to be invalidated manually in the cache tree and in the untracked
cache.
Add an invalidate flag to the function. With the flag set, the
function will take care of invalidating the path in the cache tree and
in the untracked cache.
Note that the current callsites already do the invalidation properly
in other places, so we're just passing 0 from there to keep the status
quo.
This will be useful in a subsequent commit.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the 'unlink_entry()' function from unpack-trees.c to
entry.c. It will be used in other places as well in subsequent
steps.
As it's no longer a static function, also move the documentation to
the header file to make it more discoverable.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to support :(attr) when matching pathspec on a tree,
tree_entry_interesting() needs to take an index (because
git_check_attr() needs it). This is the preparation step for it. This
also makes it clearer what index we fall back to when looking up
attributes during an unpack-trees operation: the source index.
This also fixes revs->pruning.repo initialization that should have
been done in 2abf350385 (revision.c: remove implicit dependency on
the_index - 2018-09-21). Without it, skip_uninteresting() will
dereference a NULL pointer through this call chain
get_revision(revs)
get_revision_internal
get_revision_1
try_to_simplify_commit
rev_compare_tree
diff_tree_oid(..., &revs->pruning)
ll_diff_tree_oid
diff_tree_paths
ll_diff_tree
skip_uninteresting
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the problems with "git checkout" is that it does so many
different things and could confuse people specially when we fail to
handle ambiguation correctly.
One way to help with that is tell the user what sort of operation is
actually carried out. When switching branches, we always print
something unless --quiet, either
- "HEAD is now at ..."
- "Reset branch ..."
- "Already on ..."
- "Switched to and reset ..."
- "Switched to a new branch ..."
- "Switched to branch ..."
Checking out paths however is silent. Print something so that if we
got the user intention wrong, they won't waste too much time to find
that out. For the remaining cases of checkout we now print either
- "Checked out ... paths out of the index"
- "Checked out ... paths out of <abbrev hash>"
Since the purpose of printing this is to help disambiguate. Only do it
when "--" is missing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This case is more interesting than other boring "remove the_repo"
commits because while we need access to the object database, we cannot
simply use r->index because unpack-trees.c can operate on a temporary
index, not $GIT_DIR/index. Ideally we should be able to pass an object
database to lookup_tree() but that ship has sailed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
it is unconditionally initialized a few lines below
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to backfill objects in lazily cloned repository did not
work correctly, which has been corrected.
* jt/lazy-object-fetch-fix:
fetch-object: set exact_oid when fetching
fetch-object: unify fetch_object[s] functions
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
The unpack_trees() API used in checking out a branch and merging
walks one or more trees along with the index. When the cache-tree
in the index tells us that we are walking a tree whose flattened
contents is known (i.e. matches a span in the index), as linearly
scanning a span in the index is much more efficient than having to
open tree objects recursively and listing their entries, the walk
can be optimized, which is done in this topic.
* nd/unpack-trees-with-cache-tree:
Document update for nd/unpack-trees-with-cache-tree
cache-tree: verify valid cache-tree in the test suite
unpack-trees: add missing cache invalidation
unpack-trees: reuse (still valid) cache-tree from src_index
unpack-trees: reduce malloc in cache-tree walk
unpack-trees: optimize walking same trees with cache-tree
unpack-trees: add performance tracing
trace.h: support nested performance tracing
Running "git clone" against a project that contain two files with
pathnames that differ only in cases on a case insensitive
filesystem would result in one of the files lost because the
underlying filesystem is incapable of holding both at the same
time. An attempt is made to detect such a case and warn.
* nd/clone-case-smashing-warning:
clone: report duplicate entries on case-insensitive filesystems
There are fetch_object() and fetch_objects() helpers in
fetch-object.h; as the latter takes "struct oid_array",
the former cannot be made into a thin wrapper around the
latter without an extra allocation and set-up cost.
Update fetch_objects() to take an array of "struct object_id"
and number of elements in it as separate parameters, remove
fetch_object(), and adjust all existing callers of these
functions to use the new fetch_objects().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an incorrect comment in the new code added in b4da37380b
(unpack-trees: optimize walking same trees with cache-tree -
2018-08-18) and document about the new test variable that is enabled
by default in test-lib.sh in 4592e6080f (cache-tree: verify valid
cache-tree in the test suite - 2018-08-18)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sure that cache-tree is consistent with the index. The main
purpose is to catch potential problems by saving the index in
unpack_trees() but the line in write_index() would also help spot
missing invalidation in other code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any changes to the output index should be (confusingly) marked in the
source index with invalidate_ce_path(). This is used to make sure we
still have valid untracked cache and cache-tree extensions in the end.
We do a pretty good job of invalidating except in two places.
verify_clean_subdirectory() is part of verify_absent() and
verify_absent_sparse(). The former is usually called by merged_entry()
or directly in threeway_merge(). The latter is obviously used by
sparse checkout.
In these three call sites, only merged_entry() follows up with
invalidate_ce_path(). The other two don't, but they should not trigger
this ce removal because this is about D/F conflicts [1]. But let's be
safe and invalidate_ce_path() here as well.
The second place is keep_entry() which is also used by threeway_merge()
to keep higher stage entries. In order to reuse cache-tree we need to
invalidate these paths as well. It's not a problem in the past because
whenever a higher stage entry is present, cache-tree will not be
created [2]. Now we salvage cache-tree even when higher stage entries
are present, we need more invalidation.
[1] c81935348b (Fix switching to a branch with D/F when current branch
has file D. - 2007-03-15)
[2] This is probably too strict. We should be able to create and save
cache-tree for the directories that do not have conflict entries
in cache_tree_update(). And this becomes more important when
cache-tree plays bigger role in terms of performance.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do n-way merge by walking the source index and n trees at the same
time and add merge results to a new temporary index called o->result.
The merge result for any given path could be either
- keep_entry(): same old index entry in o->src_index is reused
- merged_entry(): either a new entry is added, or an existing one updated
- deleted_entry(): one entry from o->src_index is removed
For some reason [1] we keep making sure that the source index's
cache-tree is still valid if used by o->result: for all those
merged/deleted entries, we invalidate the same path in o->src_index,
so only cache-trees covering the "keep_entry" parts remain good.
Because of this, the cache-tree from o->src_index can be perfectly
reused in o->result. And in fact we already rely on this logic to
reuse untracked cache in edf3b90553 (unpack-trees: preserve index
extensions - 2017-05-08). Move the cache-tree to o->result before
doing cache_tree_update() to reduce hashing cost.
Since cache_tree_update() has risen up as one of the most expensive
parts in unpack_trees() after the last few patches. This does help
reduce unpack_trees() time significantly (on webkit.git):
before after
--------------------------------------------------------------------
0.080394752 0.051258167 s: read cache .git/index
0.216010838 0.212106298 s: preload index
0.008534301 0.280521764 s: refresh index
0.251992198 0.218160442 s: traverse_trees
0.377031383 0.374948191 s: check_updates
0.372768105 0.037040114 s: cache_tree_update
1.045887251 0.672031609 s: unpack_trees
0.314983512 0.317456290 s: write index, changed mask = 2e
0.062572653 0.038382654 s: traverse_trees
0.000022544 0.000042731 s: check_updates
0.073795585 0.050930053 s: unpack_trees
0.073807557 0.051099735 s: diff-index
1.938191592 1.614241153 s: git command: git checkout -
[1] I'm pretty sure the reason is an oversight in 34110cd4e3 (Make
'unpack_trees()' have a separate source and destination index -
2008-03-06). That patch aims to _not_ update the source index at
all. The invalidation should have been done on o->result in that
patch. But then there was no cache-tree on o->result even then so
it's pointless to do so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a micro optimization that probably only shines on repos with
deep directory structure. Instead of allocating and freeing a new
cache_entry in every iteration, we reuse the last one and only update
the parts that are new each iteration.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to merge one or many trees with the index, unpack-trees code
walks multiple trees in parallel with the index and performs n-way
merge. If we find out at start of a directory that all trees are the
same (by comparing OID) and cache-tree happens to be available for
that directory as well, we could avoid walking the trees because we
already know what these trees contain: it's flattened in what's called
"the index".
The upside is of course a lot less I/O since we can potentially skip
lots of trees (think subtrees). We also save CPU because we don't have
to inflate and apply the deltas. The downside is of course more
fragile code since the logic in some functions are now duplicated
elsewhere.
"checkout -" with this patch on webkit.git (275k files):
baseline new
--------------------------------------------------------------------
0.056651714 0.080394752 s: read cache .git/index
0.183101080 0.216010838 s: preload index
0.008584433 0.008534301 s: refresh index
0.633767589 0.251992198 s: traverse_trees
0.340265448 0.377031383 s: check_updates
0.381884638 0.372768105 s: cache_tree_update
1.401562947 1.045887251 s: unpack_trees
0.338687914 0.314983512 s: write index, changed mask = 2e
0.411927922 0.062572653 s: traverse_trees
0.000023335 0.000022544 s: check_updates
0.423697246 0.073795585 s: unpack_trees
0.423708360 0.073807557 s: diff-index
2.559524127 1.938191592 s: git command: git checkout -
Another measurement from Ben's running "git checkout" with over 500k
trees (on the whole series):
baseline new
----------------------------------------------------------------------
0.535510167 0.556558733 s: read cache .git/index
0.3057373 0.3147105 s: initialize name hash
0.0184082 0.023558433 s: preload index
0.086910967 0.089085967 s: refresh index
7.889590767 2.191554433 s: unpack trees
0.120760833 0.131941267 s: update worktree after a merge
2.2583504 2.572663167 s: repair cache-tree
0.8916137 0.959495233 s: write index, changed mask = 28
3.405199233 0.2710663 s: unpack trees
0.000999667 0.0021554 s: update worktree after a merge
3.4063306 0.273318333 s: diff-index
16.9524923 9.462943133 s: git command: git.exe checkout
This command calls unpack_trees() twice, the first time on 2way merge
and the second 1way merge. In both times, "unpack trees" time is
reduced to one third. Overall time reduction is not that impressive of
course because index operations take a big chunk. And there's that
repair cache-tree line.
PS. A note about cache-tree invalidation and the use of it in this
code.
We do invalidate cache-tree in _source_ index when we add new entries
to the (temporary) "result" index. But we also use the cache-tree from
source index in this optimization. Does this mean we end up having no
cache-tree in the source index to activate this optimization?
The answer is twisted: the order of finding a good cache-tree and
invalidating it matters. In this case we check for a good cache-tree
first in all_trees_same_as_cache_tree(), then we start to merge things
and potentially invalidate that same cache-tree in the process. Since
cache-tree invalidation happens after the optimization kicks in, we're
still good. But we may lose that cache-tree at the very first
call_unpack_fn() call in traverse_by_cache_tree().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're going to optimize unpack_trees() a bit in the following
patches. Let's add some tracing to measure how long it takes before
and after. This is the baseline ("git checkout -" on webkit.git, 275k
files on worktree)
performance: 0.056651714 s: read cache .git/index
performance: 0.183101080 s: preload index
performance: 0.008584433 s: refresh index
performance: 0.633767589 s: traverse_trees
performance: 0.340265448 s: check_updates
performance: 0.381884638 s: cache_tree_update
performance: 1.401562947 s: unpack_trees
performance: 0.338687914 s: write index, changed mask = 2e
performance: 0.411927922 s: traverse_trees
performance: 0.000023335 s: check_updates
performance: 0.423697246 s: unpack_trees
performance: 0.423708360 s: diff-index
performance: 2.559524127 s: git command: git checkout -
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paths that only differ in case work fine in a case-sensitive
filesystems, but if those repos are cloned in a case-insensitive one,
you'll get problems. The first thing to notice is "git status" will
never be clean with no indication what exactly is "dirty".
This patch helps the situation a bit by pointing out the problem at
clone time. Even though this patch talks about case sensitivity, the
patch makes no assumption about folding rules by the filesystem. It
simply observes that if an entry has been already checked out at clone
time when we're about to write a new path, some folding rules are
behind this.
In the case that we can't rely on filesystem (via inode number) to do
this check, fall back to fspathcmp() which is not perfect but should
not give false positives.
This patch is tested with vim-colorschemes and Sublime-Gitignore
repositories on a JFS partition with case insensitive support on
Linux.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since attr checking API now take the index, there's no need to set an
index in advance with this call. Most call sites are straightforward
because they either pass the_index or NULL (which defaults back to
the_index previously). There's only one suspicious call site in
unpack-trees.c where it sets a different index.
This code in unpack-trees is about to check out entries from the
new/temporary index after merging is done in it. The attributes will
be used by entry.c code to do crlf conversion if needed. entry.c now
respects struct checkout's istate field, and this field is correctly
set in unpack-trees.c, there should be no regression from this change.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both functions that are updated in this commit are called by
verify_absent(), which is part of the "unpack-trees" operation that is
supposed to work on any index file specified by the caller. Thanks to
Brandon [1] [2], an implicit dependency on the_index is exposed. This
commit fixes it.
In both functions, it makes sense to use src_index to check for
exclusion because it's almost unchanged and should give us the same
outcome as if running the exclude check before the unpack.
It's "almost unchanged" because we do invalidate cache-tree and
untracked cache in the source index. But this should not affect how
exclude machinery uses the index: to see if a file is tracked, and to
read a blob from the index instead of worktree if it's marked
skip-worktree (i.e. it's not available in worktree)
[1] a0bba65b10 (dir: convert is_excluded to take an index - 2017-05-05
[2] 2c1eb10454 (dir: convert read_directory to take an index - 2017-05-05)
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to fba92be8f7, this code implicitly (and incorrectly) assumes
the_index when running the exclude machinery. fba92be8f7 helps show
this problem clearer because unpack-trees operation is supposed to
work on whatever index the caller specifies... not specifically
the_index.
Update the code to use "istate" argument that's originally from
mark_new_skip_worktree(). From the call sites, both in unpack_trees(),
you can see that this function works on two separate indexes:
o->src_index and o->result. The second mark_new_skip_worktree() so far
has incorecctly applied exclude rules on o->src_index instead of
o->result. It's unclear what is the consequences of this, but it's
definitely wrong.
[1] fba92be8f7 (dir: convert is_excluded_from_list to take an index -
2017-05-05)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function mark_new_skip_worktree() has an argument named the_index
which is also the name of a global variable. While they have different
types (the global the_index is not a pointer) mistakes can easily
happen and it's also confusing for readers. Rename the function
argument to something other than the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a large tree, the index needs to hold many cache entries
allocated on heap. These cache entries are now allocated out of a
dedicated memory pool to amortize malloc(3) overhead.
* jm/cache-entry-from-mem-pool:
block alloc: add validations around cache_entry lifecyle
block alloc: allocate cache entries from mem_pool
mem-pool: fill out functionality
mem-pool: add life cycle management functions
mem-pool: only search head block for available space
block alloc: add lifecycle APIs for cache_entry structs
read-cache: teach make_cache_entry to take object_id
read-cache: teach refresh_cache_entry to take istate
"git reset --merge" (hence "git merge ---abort") and "git reset --hard"
had trouble working correctly in a sparsely checked out working
tree after a conflict, which has been corrected.
* mk/merge-in-sparse-checkout:
unpack-trees: do not fail reset because of unmerged skipped entry
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
After modify/delete merge conflict happens in a file skipped by sparse
checkout, "git reset --merge", which implements the "--abort" actions,
and "git reset --hard" fail with message "Entry * not uptodate. Cannot
update sparse checkout."
As explained in [1], the up-to-date checker mistakenly treats conflicted
entry which does not exist in HEAD as still skipped by sparse checkout.
Use the fix suggested in [1]. Also, add test case which verifies the
issue is fixed.
[1] https://public-inbox.org/git/20180616051444.GA29754@duynguyen.home/
Signed-off-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading large indexes from disk, a portion of the time is
dominated in malloc() calls. This can be mitigated by allocating a
large block of memory and manage it ourselves via memory pools.
This change moves the cache entry allocation to be on top of memory
pools.
Design:
The index_state struct will gain a notion of an associated memory_pool
from which cache_entries will be allocated from. When reading in the
index from disk, we have information on the number of entries and
their size, which can guide us in deciding how large our initial
memory allocation should be. When an index is discarded, the
associated memory_pool will be discarded as well - so the lifetime of
a cache_entry is tied to the lifetime of the index_state that it was
allocated for.
In the case of a Split Index, the following rules are followed. 1st,
some terminology is defined:
Terminology:
- 'the_index': represents the logical view of the index
- 'split_index': represents the "base" cache entries. Read from the
split index file.
'the_index' can reference a single split_index, as well as
cache_entries from the split_index. `the_index` will be discarded
before the `split_index` is. This means that when we are allocating
cache_entries in the presence of a split index, we need to allocate
the entries from the `split_index`'s memory pool. This allows us to
follow the pattern that `the_index` can reference cache_entries from
the `split_index`, and that the cache_entries will not be freed while
they are still being referenced.
Managing transient cache_entry structs:
Cache entries are usually allocated for an index, but this is not always
the case. Cache entries are sometimes allocated because this is the
type that the existing checkout_entry function works with. Because of
this, the existing code needs to handle cache entries associated with an
index / memory pool, and those that only exist transiently. Several
strategies were contemplated around how to handle this:
Chosen approach:
An extra field was added to the cache_entry type to track whether the
cache_entry was allocated from a memory pool or not. This is currently
an int field, as there are no more available bits in the existing
ce_flags bit field. If / when more bits are needed, this new field can
be turned into a proper bit field.
Alternatives:
1) Do not include any information about how the cache_entry was
allocated. Calling code would be responsible for tracking whether the
cache_entry needed to be freed or not.
Pro: No extra memory overhead to track this state
Con: Extra complexity in callers to handle this correctly.
The extra complexity and burden to not regress this behavior in the
future was more than we wanted.
2) cache_entry would gain knowledge about which mem_pool allocated it
Pro: Could (potentially) do extra logic to know when a mem_pool no
longer had references to any cache_entry
Con: cache_entry would grow heavier by a pointer, instead of int
We didn't see a tangible benefit to this approach
3) Do not add any extra information to a cache_entry, but when freeing a
cache entry, check if the memory exists in a region managed by existing
mem_pools.
Pro: No extra memory overhead to track state
Con: Extra computation is performed when freeing cache entries
We decided tracking and iterating over known memory pool regions was
less desirable than adding an extra field to track this stae.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been observed that the time spent loading an index with a large
number of entries is partly dominated by malloc() calls. This change
is in preparation for using memory pools to reduce the number of
malloc() calls made to allocate cahce entries when loading an index.
Add an API to allocate and discard cache entries, abstracting the
details of managing the memory backing the cache entries. This commit
does actually change how memory is managed - this will be done in a
later commit in the series.
This change makes the distinction between cache entries that are
associated with an index and cache entries that are not associated with
an index. A main use of cache entries is with an index, and we can
optimize the memory management around this. We still have other cases
where a cache entry is not persisted with an index, and so we need to
handle the "transient" use case as well.
To keep the congnitive overhead of managing the cache entries, there
will only be a single discard function. This means there must be enough
information kept with the cache entry so that we know how to discard
them.
A summary of the main functions in the API is:
make_cache_entry: create cache entry for use in an index. Uses specified
parameters to populate cache_entry fields.
make_empty_cache_entry: Create an empty cache entry for use in an index.
Returns cache entry with empty fields.
make_transient_cache_entry: create cache entry that is not used in an
index. Uses specified parameters to populate
cache_entry fields.
make_empty_transient_cache_entry: create cache entry that is not used in
an index. Returns cache entry with
empty fields.
discard_cache_entry: A single function that knows how to discard a cache
entry regardless of how it was allocated.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leak plugging.
* ma/unpack-trees-free-msgs:
unpack_trees_options: free messages when done
argv-array: return the pushed string from argv_push*()
merge-recursive: provide pair of `unpack_trees_{start,finish}()`
merge: setup `opts` later in `checkout_fast_forward()`
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
The split-index feature had a long-standing and dormant bug in
certain use of the in-core merge machinery, which has been fixed.
* en/unpack-trees-split-index-fix:
unpack_trees: fix breakage when o->src_index != o->dst_index
Rename detection logic in "diff" family that is used in "merge" has
learned to guess when all of x/a, x/b and x/c have moved to z/a,
z/b and z/c, it is likely that x/d added in the meantime would also
want to move to z/d by taking the hint that the entire directory
'x' moved to 'z'. A bug causing dirty files involved in a rename
to be overwritten during merge has also been fixed as part of this
work. Incidentally, this also avoids updating a file in the
working tree after a (non-trivial) merge whose result matches what
our side originally had.
* en/rename-directory-detection-reboot: (36 commits)
merge-recursive: fix check for skipability of working tree updates
merge-recursive: make "Auto-merging" comment show for other merges
merge-recursive: fix remainder of was_dirty() to use original index
merge-recursive: fix was_tracked() to quit lying with some renamed paths
t6046: testcases checking whether updates can be skipped in a merge
merge-recursive: avoid triggering add_cacheinfo error with dirty mod
merge-recursive: move more is_dirty handling to merge_content
merge-recursive: improve add_cacheinfo error handling
merge-recursive: avoid spurious rename/rename conflict from dir renames
directory rename detection: new testcases showcasing a pair of bugs
merge-recursive: fix remaining directory rename + dirty overwrite cases
merge-recursive: fix overwriting dirty files involved in renames
merge-recursive: avoid clobbering untracked files with directory renames
merge-recursive: apply necessary modifications for directory renames
merge-recursive: when comparing files, don't include trees
merge-recursive: check for file level conflicts then get new name
merge-recursive: add computation of collisions due to dir rename & merging
merge-recursive: check for directory level conflicts
merge-recursive: add get_directory_renames()
merge-recursive: make a helper function for cleanup for handle_renames
...
The strings allocated in `setup_unpack_trees_porcelain()` are never
freed. Provide a function `clear_unpack_trees_porcelain()` to do so and
call it where we use `setup_unpack_trees_porcelain()`. The only
non-trivial user is `unpack_trees_start()`, where we should place the
new call in `unpack_trees_finish()`.
We keep the string pointers in an array, mixing pointers to static
memory and memory that we allocate on the heap. We also keep several
copies of the individual pointers. So we need to make sure that we do
not free what we must not free and that we do not double-free. Let a
separate argv_array take ownership of all the strings we create so that
we can easily free them.
Zero the whole array of string pointers to make sure that we do not
leave any dangling pointers.
Note that we only take responsibility for the memory allocated in
`setup_unpack_trees_porcelain()` and not any other members of the
`struct unpack_trees_options`.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue that existed before my directory rename detection
patches that affects both normal renames and renames implied by
directory rename detection. Additional codepaths that only affect
overwriting of dirty files that are involved in directory rename
detection will be added in a subsequent commit.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Moving a submodule that itself has submodule in it with "git mv"
forgot to make necessary adjustment to the nested sub-submodules;
now the codepath learned to recurse into the submodules.
* sb/submodule-move-nested:
submodule: fixup nested submodules after moving the submodule
submodule-config: remove submodule_from_cache
submodule-config: add repository argument to submodule_from_{name, path}
submodule-config: allow submodule_free to handle arbitrary repositories
grep: remove "repo" arg from non-supporting funcs
submodule.h: drop declaration of connect_work_tree_and_git_dir
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust struct index_state to use struct object_id instead of unsigned
char [20].
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, all callers of unpack_trees() set o->src_index == o->dst_index.
The code in unpack_trees() does not correctly handle them being different.
There are two separate issues:
First, there is the possibility of memory corruption. Since
unpack_trees() creates a temporary index in o->result and then discards
o->dst_index and overwrites it with o->result, in the special case that
o->src_index == o->dst_index, it is safe to just reuse o->src_index's
split_index for o->result. However, when src and dst are different,
reusing o->src_index's split_index for o->result will cause the
split_index to be shared. If either index then has entries replaced or
removed, it will result in the other index referring to free()'d memory.
Second, we can drop the index extensions. Previously, we were moving
index extensions from o->dst_index to o->result. Since o->src_index is
the one that will have the necessary extensions (o->dst_index is likely to
be a new index temporary index created to store the results), we should be
moving the index extensions from there.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit e4bb62fa1e, reversing
changes made to 468165c1d8.
The topic appears to inflict severe regression in renaming merges,
even though the promise of it was that it would improve them.
We do not yet know which exact change in the topic was wrong, but in
the meantime, let's play it safe and revert it out of 'master'
before real Git-using projects are harmed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename detection logic in "diff" family that is used in "merge" has
learned to guess when all of x/a, x/b and x/c have moved to z/a,
z/b and z/c, it is likely that x/d added in the meantime would also
want to move to z/d by taking the hint that the entire directory
'x' moved to 'z'. A bug causing dirty files involved in a rename
to be overwritten during merge has also been fixed as part of this
work.
* en/rename-directory-detection: (29 commits)
merge-recursive: ensure we write updates for directory-renamed file
merge-recursive: avoid spurious rename/rename conflict from dir renames
directory rename detection: new testcases showcasing a pair of bugs
merge-recursive: fix remaining directory rename + dirty overwrite cases
merge-recursive: fix overwriting dirty files involved in renames
merge-recursive: avoid clobbering untracked files with directory renames
merge-recursive: apply necessary modifications for directory renames
merge-recursive: when comparing files, don't include trees
merge-recursive: check for file level conflicts then get new name
merge-recursive: add computation of collisions due to dir rename & merging
merge-recursive: check for directory level conflicts
merge-recursive: add get_directory_renames()
merge-recursive: make a helper function for cleanup for handle_renames
merge-recursive: split out code for determining diff_filepairs
merge-recursive: make !o->detect_rename codepath more obvious
merge-recursive: fix leaks of allocated renames and diff_filepairs
merge-recursive: introduce new functions to handle rename logic
merge-recursive: move the get_renames() function
directory rename detection: tests for handling overwriting dirty files
directory rename detection: tests for handling overwriting untracked files
...
At some point we may want to rename the function so that it describes what
it actually does as 'submodule_free' doesn't quite describe that this
clears a repository's submodule cache. But that's beyond the scope of
this series.
While at it remove the extern key word from its declaration.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue that existed before my directory rename detection
patches that affects both normal renames and renames implied by
directory rename detection. Additional codepaths that only affect
overwriting of dirty files that are involved in directory rename
detection will be added in a subsequent commit.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some bugs around "untracked cache" feature have been fixed.
* nd/fix-untracked-cache-invalidation:
dir.c: ignore paths containing .git when invalidating untracked cache
dir.c: stop ignoring opendir() error in open_cached_dir()
dir.c: fix missing dir invalidation in untracked code
dir.c: avoid stat() in valid_cached_dir()
status: add a failing test showing a core.untrackedCache bug
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The machinery to clone & fetch, which in turn involves packing and
unpacking objects, have been told how to omit certain objects using
the filtering mechanism introduced by the jh/object-filtering
topic, and also mark the resulting pack as a promisor pack to
tolerate missing objects, taking advantage of the mechanism
introduced by the jh/fsck-promisors topic.
* jh/partial-clone:
t5616: test bulk prefetch after partial fetch
fetch: inherit filter-spec from partial clone
t5616: end-to-end tests for partial clone
fetch-pack: restore save_commit_buffer after use
unpack-trees: batch fetching of missing blobs
clone: partial clone
partial-clone: define partial clone settings in config
fetch: support filters
fetch: refactor calculation of remote list
fetch-pack: test support excluding large blobs
fetch-pack: add --no-filter
fetch-pack, index-pack, transport: partial clone
upload-pack: add object filtering for partial clone
read_directory() code ignores all paths named ".git" even if it's not
a valid git repository. See treat_path() for details. Since ".git" is
basically invisible to read_directory(), when we are asked to
invalidate a path that contains ".git", we can safely ignore it
because the slow path would not consider it anyway.
This helps when fsmonitor is used and we have a real ".git" repo at
worktree top. Occasionally .git/index will be updated and if the
fsmonitor hook does not filter it, untracked cache is asked to
invalidate the path ".git/index".
Without this patch, we invalidate the root directory unncessarily,
which:
- makes read_directory() fall back to slow path for root directory
(slower)
- makes the index dirty (because UNTR extension is updated). Depending
on the index size, writing it down could also be slow.
A note about the new "safe_path" knob. Since this new check could be
relatively expensive, avoid it when we know it's not needed. If the
path comes from the index, it can't contain ".git". If it does
contain, we may be screwed up at many more levels, not just this one.
Noticed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is a one way merge, each submodule needs to be one way merged
as well, if we're asked to recurse into submodules.
In case of a submodule, check if it is up-to-date, otherwise set the
flag CE_UPDATE, which will trigger an update of it in the phase updating
the tree later.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running checkout, first prefetch all blobs that are to be updated
but are missing. This means that only one pack is downloaded during such
operations, instead of one per missing blob.
This operates only on the blob level - if a repository has a missing
tree, they are still fetched one at a time.
This does not use the delayed checkout mechanism introduced in commit
2841e8f ("convert: add "status=delayed" to filter process protocol",
2017-06-30) due to significant conceptual differences - in particular,
for partial clones, we already know what needs to be fetched based on
the contents of the local repo alone, whereas for status=delayed, it is
the filter process that tells us what needs to be checked in the end.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
Convert the declaration and definition of resolve_gitlink_ref to use
struct object_id and apply the following semantic patch:
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3.hash)
+ resolve_gitlink_ref(E1, E2, &E3)
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3->hash)
+ resolve_gitlink_ref(E1, E2, E3)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index is read from disk, the fsmonitor index extension is used
to flag the last known potentially dirty index entries. The registered
core.fsmonitor command is called with the time the index was last
updated and returns the list of files changed since that time. This list
is used to flag any additional dirty cache entries and untracked cache
directories.
We can then use this valid state to speed up preload_index(),
ie_match_stat(), and refresh_cache_ent() as they do not need to lstat()
files to detect potential changes for those entries marked
CE_FSMONITOR_VALID.
In addition, if the untracked cache is turned on valid_cached_dir() can
skip checking directories for new or changed files as fsmonitor will
invalidate the cache only for those directories that have been
identified as having potential changes.
To keep the CE_FSMONITOR_VALID state accurate during git operations;
when git updates a cache entry to match the current state on disk,
it will now set the CE_FSMONITOR_VALID bit.
Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit
is cleared and the corresponding untracked cache directory is marked
invalid.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath to call external process filter for smudge/clean
operation learned to show the progress meter.
* ls/convert-filter-progress:
convert: display progress for filtered objects that have been delayed
Message and doc updates.
* ma/up-to-date:
treewide: correct several "up-to-date" to "up to date"
Documentation/user-manual: update outdated example output
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
In 2841e8f ("convert: add "status=delayed" to filter process protocol",
2017-06-30) we taught the filter process protocol to delayed responses.
These responses are processed after the "Checking out files" phase.
If the processing takes noticeable time, then the user might think Git
is stuck.
Display the progress of the delayed responses to let the user know that
Git is still processing objects. This works very well for objects that
can be filtered quickly. If filtering of an individual object takes
noticeable time, then the user might still think that Git is stuck.
However, in that case the user would at least know what Git is doing.
It would be technical more correct to display "Checking out files whose
content filtering has been delayed". For brevity we only print
"Filtering content".
The finish_delayed_checkout() call was moved below the stop_progress()
call in unpack-trees.c to ensure that the "Checking out files" progress
is properly stopped before the "Filtering content" progress starts in
finish_delayed_checkout().
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Suggested-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep --recurse-submodules" has been reworked to give a more
consistent output across submodule boundary (and do its thing
without having to fork a separate process).
* bw/grep-recurse-submodules:
grep: recurse in-process using 'struct repository'
submodule: merge repo_read_gitmodules and gitmodules_config
submodule: check for unmerged .gitmodules outside of config parsing
submodule: check for unstaged .gitmodules outside of config parsing
submodule: remove fetch.recursesubmodules from submodule-config parsing
submodule: remove submodule.fetchjobs from submodule-config parsing
config: add config_from_gitmodules
cache.h: add GITMODULES_FILE macro
repository: have the_repository use the_index
repo_read_index: don't discard the index
We used to expose the full power of the delayed progress API to the
callers, so that they can specify, not just the message to show and
expected total amount of work that is used to compute the percentage
of work performed so far, the percent-threshold parameter P and the
delay-seconds parameter N. The progress meter starts to show at N
seconds into the operation only if we have not yet completed P per-cent
of the total work.
Most callers used either (0%, 2s) or (50%, 1s) as (P, N), but there
are oddballs that chose more random-looking values like 95%.
For a smoother workload, (50%, 1s) would allow us to start showing
the progress meter earlier than (0%, 2s), while keeping the chance
of not showing progress meter for long running operation the same as
the latter. For a task that would take 2s or more to complete, it
is likely that less than half of it would complete within the first
second, if the workload is smooth. But for a spiky workload whose
earlier part is easier, such a setting is likely to fail to show the
progress meter entirely and (0%, 2s) is more appropriate.
But that is merely a theory. Realistically, it is of dubious value
to ask each codepath to carefully consider smoothness of their
workload and specify their own setting by passing two extra
parameters. Let's simplify the API by dropping both parameters and
have everybody use (0%, 2s).
Oh, by the way, the percent-threshold parameter and the structure
member were consistently misspelled, which also is now fixed ;-)
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers of fill_tree_descriptor() have been converted to object_id
already, so convert that function as well. As a nice side-effect we get
rid of NULL checks in tree-diff.c, as fill_tree_descriptor() already
does them for us.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The filter-process interface learned to allow a process with long
latency give a "delayed" response.
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
When recursing submodules 'check_updates()' needs to have strict control
over the submodule-config subsystem to ensure that the gitmodules file
has been read before checking cache entries which are marked for
removal as well ensuring the proper gitmodules file is read before
updating cache entries.
Because of this let's not rely on callers of 'check_updates()' to read
the gitmodules file before calling 'check_updates()' and handle the
reading explicitly.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'submodule.update' config was historically used and respected by the
'submodule update' command because update handled a variety of different
ways it updated a submodule. As we begin teaching other commands about
submodules it makes more sense for the different settings of
'submodule.update' to be handled by the individual commands themselves
(checkout, rebase, merge, etc) so it shouldn't be respected by the
native checkout command.
Also remove the overlaying of the repository's config (via using
'submodule_config()') from the commands which use the unpack-trees
logic (checkout, read-tree, reset).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a macro to be used when specifying the '.gitmodules' file and
convert any existing hard coded '.gitmodules' file strings to use the
new macro.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Some `clean` / `smudge` filters may require a significant amount of
time to process a single blob (e.g. the Git LFS smudge filter might
perform network requests). During this process the Git checkout
operation is blocked and Git needs to wait until the filter is done to
continue with the checkout.
Teach the filter process protocol, introduced in edcc8581 ("convert: add
filter.<driver>.process option", 2016-10-16), to accept the status
"delayed" as response to a filter request. Upon this response Git
continues with the checkout operation. After the checkout operation Git
calls "finish_delayed_checkout" which queries the filter for remaining
blobs. If the filter is still working on the completion, then the filter
is expected to block. If the filter has completed all remaining blobs
then an empty response is expected.
Git has a multiple code paths that checkout a blob. Support delayed
checkouts only in `clone` (in unpack-trees.c) and `checkout` operations
for now. The optimization is most effective in these code paths as all
files of the tree are processed.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git checkout", "git merge", etc. manipulates the in-core
index, various pieces of information in the index extensions are
discarded from the original state, as it is usually not the case
that they are kept up-to-date and in-sync with the operation on the
main index. The untracked cache extension is copied across these
operations now, which would speed up "git status" (as long as the
cache is properly invalidated).
* dt/unpack-save-untracked-cache-extension:
unpack-trees: preserve index extensions
API update.
* bw/dir-c-stops-relying-on-the-index:
dir: convert fill_directory to take an index
dir: convert read_directory to take an index
dir: convert read_directory_recursive to take an index
dir: convert open_cached_dir to take an index
dir: convert is_excluded to take an index
dir: convert prep_exclude to take an index
dir: convert add_excludes to take an index
dir: convert is_excluded_from_list to take an index
dir: convert last_exclude_matching_from_list to take an index
dir: convert dir_add* to take an index
dir: convert get_dtype to take index
dir: convert directory_exists_in_index to take index
dir: convert read_skip_worktree_file_from_index to take an index
dir: stop using the index compatibility macros
Make git checkout (and other unpack_tree operations) preserve the
untracked cache. This is valuable for two reasons:
1. Often, an unpack_tree operation will not touch large parts of the
working tree, and thus most of the untracked cache will continue to be
valid.
2. Even if the untracked cache were entirely invalidated by such an
operation, the user has signaled their intention to have such a cache,
and we don't want to throw it away.
[jes: backed out the watchman-specific parts]
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a 2- and 3-way merge of trees, more than one source trees often
end up sharing an identical subtree; optimize by not reading the
same tree multiple times in such a case.
* jh/unpack-trees-micro-optim:
unpack-trees: avoid duplicate ODB lookups during checkout
In case of a non-forced worktree update, the submodule movement is tested
in a dry run first, such that it doesn't matter if the actual update is
done via the force flag. However for correctness, we want to give the
flag as specified by the user. All callers have been inspected and updated
if needed.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach traverse_trees_recursive() to not do redundant ODB
lookups when both directories refer to the same OID.
In operations such as read-tree and checkout, there will
likely be many peer directories that have the same OID when
the differences between the commits are relatively small.
In these cases we can avoid hitting the ODB multiple times
for the same OID.
This patch handles n=2 and n=3 cases and simply copies the
data rather than repeating the fill_tree_descriptor().
================
On the Windows repo (500K trees, 3.1M files, 450MB index),
this reduced the overall time by 0.75 seconds when cycling
between 2 commits with a single file difference.
(avg) before: 22.699
(avg) after: 21.955
===============
================
On Linux using p0006-read-tree-checkout.sh with linux.git:
Test HEAD^ HEAD
-------------------------------------------------------------------------------------------------------
0006.2: read-tree br_base br_ballast (57994) 0.24(0.20+0.03) 0.24(0.22+0.01) +0.0%
0006.3: switch between br_base br_ballast (57994) 10.58(6.23+2.86) 10.67(5.94+2.87) +0.9%
0006.4: switch between br_ballast br_ballast_plus_1 (57994) 0.60(0.44+0.17) 0.57(0.44+0.14) -5.0%
0006.5: switch between aliases (57994) 0.59(0.48+0.13) 0.57(0.44+0.15) -3.4%
================
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the place holder in the error message is for multiple submodules,
we don't want to encapsulate the string place holder in single quotes.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we'll support submodule entries to be
in sync with the tree in working tree changing commands,
such as checkout or read-tree.
When a new submodule entry changes in the tree, we need to
check if there are conflicts (directory/file conflicts)
for the tree. Add this check for submodules to be
performed before the working tree is touched.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check (which uses the old oid) is yet to be implemented, but this part
is just a refactor, so it can go separately first.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git read-tree" and its underlying unpack_trees() machinery learned
to report problematic paths prefixed with the --super-prefix option.
* sb/unpack-trees-super-prefix:
unpack-trees: support super-prefix option
t1001: modernize style
t1000: modernize style
read-tree: use OPT_BOOL instead of OPT_SET_INT
In the future we want to support working tree operations within submodules,
e.g. "git checkout --recurse-submodules", which will update the submodule
to the commit as recorded in its superproject. In the submodule the
unpack-tree operation is carried out as usual, but the reporting to the
user needs to prefix any path with the superproject. The mechanism for
this is the super-prefix. (see 74866d757, git: make super-prefix option)
Add support for the super-prefix option for commands that unpack trees
by wrapping any path output in unpacking trees in the newly introduced
super_prefixed function. This new function prefixes any path with the
super-prefix if there is one. Assuming the submodule case doesn't happen
in the majority of the cases, we'd want to have a fast behavior for no
super prefix, i.e. no reallocation/copying, but just returning path.
Another aspect of introducing the `super_prefixed` function is to consider
who owns the memory and if this is the right place where the path gets
modified. As the super prefix ought to change the output behavior only and
not the actual unpack tree part, it is fine to be that late in the line.
As we get passed in 'const char *path', we cannot change the path itself,
which means in case of a super prefix we have to copy over the path.
We need two static buffers in that function as the error messages
contain at most two paths.
For testing purposes enable it in read-tree, which has no output
of paths other than an unpack-trees.c. These are all converted in
this patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes check_updates shorter and easier to understand.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The continue is the last statement in the loop, so not needed.
This situation arose in 700e66d66 (2010-07-30, unpack-trees: let
read-tree -u remove index entries outside sparse area) when statements
after the continue were removed.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The checkout state was introduced via 16da134b1f
(read-trees: refactor the unpack_trees() part, 2006-07-30). An attempt to
refactor the checkout state was done in b56aa5b268 (unpack-trees: pass
checkout state explicitly to check_updates(), 2016-09-13), but we can
go even further.
The `struct checkout state` is not used in unpack_trees apart from
initializing it, so move it into the function that makes use of it,
which is `check_updates`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed-by: David Turner <dturner@twosigma.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a static initializer for struct checkout and use it throughout the
code base. It's shorter, avoids a memset(3) call and makes sure the
base_dir member is initialized to a valid (empty) string.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "unsigned char sha1[20]" to "struct object_id" conversion
continues. Notable changes in this round includes that ce->sha1,
i.e. the object name recorded in the cache_entry, turns into an
object_id.
It had merge conflicts with a few topics in flight (Christian's
"apply.c split", Dscho's "cat-file --filters" and Jeff Hostetler's
"status --porcelain-v2"). Extra sets of eyes double-checking for
mismerges are highly appreciated.
* bc/object-id:
builtin/reset: convert to use struct object_id
builtin/commit-tree: convert to struct object_id
builtin/am: convert to struct object_id
refs: add an update_ref_oid function.
sha1_name: convert get_sha1_mb to struct object_id
builtin/update-index: convert file to struct object_id
notes: convert init_notes to use struct object_id
builtin/rm: convert to use struct object_id
builtin/blame: convert file to use struct object_id
Convert read_mmblob to take struct object_id.
notes-merge: convert struct notes_merge_pair to struct object_id
builtin/checkout: convert some static functions to struct object_id
streaming: make stream_blob_to_fd take struct object_id
builtin: convert textconv_object to use struct object_id
builtin/cat-file: convert some static functions to struct object_id
builtin/cat-file: convert struct expand_data to use struct object_id
builtin/log: convert some static functions to use struct object_id
builtin/blame: convert struct origin to use struct object_id
builtin/apply: convert static functions to struct object_id
cache: convert struct cache_entry to use struct object_id
Add a parameter for the struct checkout variable to check_updates()
instead of using a static global variable. Passing it explicitly makes
object ownership and usage more easily apparent. And we get rid of a
static variable; those can be problematic in library-like code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for warning_errno/die_errno has been refactored and a new
error_errno() reporting helper is introduced.
* nd/error-errno: (41 commits)
wrapper.c: use warning_errno()
vcs-svn: use error_errno()
upload-pack.c: use error_errno()
unpack-trees.c: use error_errno()
transport-helper.c: use error_errno()
sha1_file.c: use {error,die,warning}_errno()
server-info.c: use error_errno()
sequencer.c: use error_errno()
run-command.c: use error_errno()
rerere.c: use error_errno() and warning_errno()
reachable.c: use error_errno()
mailmap.c: use error_errno()
ident.c: use warning_errno()
http.c: use error_errno() and warning_errno()
grep.c: use error_errno()
gpg-interface.c: use error_errno()
fast-import.c: use error_errno()
entry.c: use error_errno()
editor.c: use error_errno()
diff-no-index.c: use error_errno()
...
Mark several messages for translation.
* va/i18n-misc-updates:
i18n: unpack-trees: avoid substituting only a verb in sentences
i18n: builtin/pull.c: split strings marked for translation
i18n: builtin/pull.c: mark placeholders for translation
i18n: git-parse-remote.sh: mark strings for translation
i18n: branch: move comment for translators
i18n: branch: unmark string for translation
i18n: builtin/rm.c: remove a comma ',' from string
i18n: unpack-trees: mark strings for translation
i18n: builtin/branch.c: mark option for translation
i18n: index-pack: use plural string instead of normal one
Instead of reusing the same set of message templates for checkout
and other actions and substituting the verb with "%s", prepare
separate message templates for each known action. That would make
it easier for translation into languages where the same verb may
conjugate differently depending on the message we are giving.
See gettext documentation for details:
http://www.gnu.org/software/gettext/manual/html_node/Preparing-Strings.html
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark strings seen by the user inside setup_unpack_trees_porcelain() and
display_error_msgs() functions for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While unpacking trees (e.g. during git checkout), when we hit a cache
entry that's past and outside our path, we cut off iteration.
This provides about a 45% speedup on git checkout between master and
master^20000 on Twitter's monorepo. Speedup in general will depend on
repostitory structure, number of changes, and packfile packing
decisions.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In traverse_trees, we generate the complete traverse path for a
traverse_info. Later, in do_compare_entry, we used to go do a bunch
of work to compare the traverse_info to a cache_entry's name without
computing that path. But since we already have that path, we don't
need to do all that work. Instead, we can just put the generated
path into the traverse_info, and do the comparison more directly.
We copy the path because prune_traversal might mutate `base`. This
doesn't happen in any codepaths where do_compare_entry is called,
but it's better to be safe.
This makes git checkout much faster -- about 25% on Twitter's
monorepo. Deeper directory trees are likely to benefit more than
shallower ones.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common pattern to do:
foo = xmalloc(strlen(one) + strlen(two) + 1 + 1);
sprintf(foo, "%s %s", one, two);
(or possibly some variant with strcpy()s or a more
complicated length computation). We can switch these to use
xstrfmt, which is shorter, involves less error-prone manual
computation, and removes many sprintf and strcpy calls which
make it harder to audit the code for real buffer overflows.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack-trees wants to know whether a path will
overwrite anything in the working tree, we use lstat() to
see if there is anything there. But if we are going to write
"foo/bar", we can't just lstat("foo/bar"); we need to look
for leading prefixes (e.g., "foo"). So we use the lstat cache
to find the length of the leading prefix, and copy the
filename up to that length into a temporary buffer (since
the original name is const, we cannot just stick a NUL in
it).
The copy we make goes into a PATH_MAX-sized buffer, which
will overflow if the prefix is longer than PATH_MAX. How
this happens is a little tricky, since in theory PATH_MAX is
the biggest path we will have read from the filesystem. But
this can happen if:
- the compiled-in PATH_MAX does not accurately reflect
what the filesystem is capable of
- the leading prefix is not _quite_ what is on disk; it
contains the next element from the name we are checking.
So if we want to write "aaa/bbb/ccc/ddd" and "aaa/bbb"
exists, the prefix of interest is "aaa/bbb/ccc". If
"aaa/bbb" approaches PATH_MAX, then "ccc" can overflow
it.
So this can be triggered, but it's hard to do. In
particular, you cannot just "git clone" a bogus repo. The
verify_absent checks happen before unpack-trees writes
anything to the filesystem, so there are never any leading
prefixes during the initial checkout, and the bug doesn't
trigger. And by definition, these files are larger than
PATH_MAX, so writing them will fail, and clone will
complain (though it may write a partial path, which will
cause a subsequent "git checkout" to hit the bug).
We can fix it by creating the temporary path on the heap.
The extra malloc overhead is not important, as we are
already making at least one stat() call (and probably more
for the prefix discovery).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_path() and mkpath() are handy helper functions but it is easy
to misuse, as the callers need to be careful to keep the number of
active results below 4. Their uses have been reduced.
* jk/git-path:
memoize common git-path "constant" files
get_repo_path: refactor path-allocation
find_hook: keep our own static buffer
refs.c: remove_empty_directories can take a strbuf
refs.c: avoid git_path assignment in lock_ref_sha1_basic
refs.c: avoid repeated git_path calls in rename_tmp_log
refs.c: simplify strbufs in reflog setup and writing
path.c: drop git_path_submodule
refs.c: remove extra git_path calls from read_loose_refs
remote.c: drop extraneous local variable from migrate_file
prefer mkpathdup to mkpath in assignments
prefer git_pathdup to git_path in some possibly-dangerous cases
add_to_alternates_file: don't add duplicate entries
t5700: modernize style
cache.h: complete set of git_path_submodule helpers
cache.h: clarify documentation for git_path, et al
"sparse checkout" misbehaved for a path that is excluded from the
checkout when switching between branches that differ at the path.
* as/sparse-checkout-removal:
unpack-trees: don't update files with CE_WT_REMOVE set
The code to perform multi-tree merges has been taught to repopulate
the cache-tree upon a successful merge into the index, so that
subsequent "diff-index --cached" (hence "status") and "write-tree"
(hence "commit") will go faster.
The same logic in "git checkout" may now be removed, but that is a
separate issue.
* dt/unpack-trees-cache-tree-revalidate:
unpack-trees: populate cache-tree on successful merge
Because git_path uses a static buffer that is shared with
calls to git_path, mkpath, etc, it can be dangerous to
assign the result to a variable or pass it to a non-trivial
function. The value may change unexpectedly due to other
calls.
None of the cases changed here has a known bug, but they're
worth converting away from git_path because:
1. It's easy to use git_pathdup in these cases.
2. They use constructs (like assignment) that make it
hard to tell whether they're safe or not.
The extra malloc overhead should be trivial, as an
allocation should be an order of magnitude cheaper than a
system call (which we are clearly about to make, since we
are constructing a filename). The real cost is that we must
remember to free the result.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"sparse checkout" misbehaved for a path that is excluded from the
checkout when switching between branches that differ at the path.
* as/sparse-checkout-removal:
unpack-trees: don't update files with CE_WT_REMOVE set
When we unpack trees into an existing index, we discard the old
index and replace it with the new, merged index. Ensure that this
index has its cache-tree populated. This will make subsequent git
status and commit commands faster.
Signed-off-by: Brian Degenhardt <bmd@bmdhacks.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't update files in the worktree from cache entries which are
flagged with CE_WT_REMOVE.
When a user does a sparse checkout, git removes files that are
marked with CE_WT_REMOVE (because they are out-of-scope for the
sparse checkout). If those files are also marked CE_UPDATE (for
instance, because they differ in the branch that is being checked
out and the outgoing branch), git would previously recreate them.
This patch prevents them from being recreated.
These erroneously-created files would also interfere with merges,
causing pre-merge revisions of out-of-scope files to appear in the
worktree.
apply_sparse_checkout() is the function where all "action"
manipulation (add, delete, update files..) for sparse checkout
occurs; it should not ask to delete and update both at the same
time.
Signed-off-by: Anatole Shaw <git-devel@omni.poc.net>
Signed-off-by: David Turner <dturner@twopensource.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally we should implement untracked_cache_remove_from_index() and
untracked_cache_add_to_index() so that they update untracked cache
right away instead of invalidating it and wait for read_directory()
next time to deal with it. But that may need some more work in
unpack-trees.c. So stay simple as the first step.
The new call in add_index_entry_with_check() may look strange because
new calls usually stay close to cache_tree_invalidate_path(). We do it
a bit later than c_t_i_p() in this function because if it's about
replacing the entry with the same name, we don't care (but cache-tree
does).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
