Add the ability to control rename detection for merge via a config setting.
This setting behaves the same and defaults to the value of diff.renames but only
applies to merge.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" and friends learned "--compact-summary" that shows the
information usually given with the "--summary" option on the same
line as the diffstat output of the "--stat" option (which saves
vertical space and keeps info on a single path at the same place).
* nd/diff-stat-with-summary:
diff: add --compact-summary
diff.c: refactor pprint_rename() to use strbuf
Certain information is currently shown with --summary, but when used
in combination with --stat it's a bit hard to read since info of the
same file is in two places (--stat and --summary).
On top of that, commits that add or remove files double the number of
display lines, which could be a lot if you add or remove a lot of
files.
--compact-summary embeds most of --summary back in --stat in the
little space between the file name part and the graph line, e.g. with
commit 0433d533f1:
Documentation/merge-config.txt | 4 +
builtin/merge.c | 2 +
...-pull-verify-signatures.sh (new +x) | 81 ++++++++++++++
t/t7612-merge-verify-signatures.sh | 45 ++++++++
4 files changed, 132 insertions(+)
It helps both condensing information and saving some text
space. What's new in diffstat is:
- A new 0644 file is shown as (new)
- A new 0755 file is shown as (new +x)
- A new symlink is shown as (new +l)
- A deleted file is shown as (gone)
- A mode change adding executable bit is shown as (mode +x)
- A mode change removing it is shown as (mode -x)
Note that --compact-summary does not contain all the information
--summary provides. Rewrite percentage is not shown but it could be
added later, like R50% or C20%.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff" family of commands learned "--find-object=<object-id>" option
to limit the findings to changes that involve the named object.
* sb/diff-blobfind-pickaxe:
diff: use HAS_MULTI_BITS instead of counting bits manually
diff: properly error out when combining multiple pickaxe options
diffcore: add a pickaxe option to find a specific blob
diff: introduce DIFF_PICKAXE_KINDS_MASK
diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bit
diff.h: make pickaxe_opts an unsigned bit field
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
One might be tempted to extend git-describe to also work with blobs,
such that `git describe <blob-id>` gives a description as
'<commit-ish>:<path>'. This was implemented at [2]; as seen by the sheer
number of responses (>110), it turns out this is tricky to get right.
The hard part to get right is picking the correct 'commit-ish' as that
could be the commit that (re-)introduced the blob or the blob that
removed the blob; the blob could exist in different branches.
Junio hinted at a different approach of solving this problem, which this
patch implements. Teach the diff machinery another flag for restricting
the information to what is shown. For example:
$ ./git log --oneline --find-object=v2.0.0:Makefile
b2feb64309 Revert the whole "ask curl-config" topic for now
47fbfded53 i18n: only extract comments marked with "TRANSLATORS:"
we observe that the Makefile as shipped with 2.0 was appeared in
v1.9.2-471-g47fbfded53 and in v2.0.0-rc1-5-gb2feb6430b. The
reason why these commits both occur prior to v2.0.0 are evil
merges that are not found using this new mechanism.
[1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob
[2] https://public-inbox.org/git/20171028004419.10139-1-sbeller@google.com/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the check whether to perform pickaxing is done via checking
`diffopt->pickaxe`, which contains the command line argument that we
want to pickaxe for. Soon we'll introduce a new type of pickaxing, that
will not store anything in the `.pickaxe` field, so let's migrate the
check to be dependent on pickaxe_opts.
It is not enough to just replace the check for pickaxe by pickaxe_opts,
because flags might be set, but pickaxing was not requested ('-i').
To cope with that, introduce a mask to check only for the bits indicating
the modes of operation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently flags for pickaxing are found in different places. Unify the
flags into the `pickaxe_opts` field, which will contain any pickaxe related
flags.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable is used as a bit field[1], and as we are about to add more
fields, indicate its usage as a bit field by making it unsigned.
[1] containing the bits
#define DIFF_PICKAXE_ALL 1
#define DIFF_PICKAXE_REGEX 2
#define DIFF_PICKAXE_KIND_S 4
#define DIFF_PICKAXE_KIND_G 8
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach diff a new algorithm, one that attempts to prevent user-specified
lines from appearing as a deletion or addition in the end result. The
end user can use this by specifying "--anchored=<text>" one or more
times when using Git commands like "diff" and "show".
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
Pathspec-limited revision traversal was taught not to keep finding
unneeded differences once it knows two trees are different inside
given pathspec.
* jk/revision-pruning-optim:
revision: quit pruning diff more quickly when possible
Remove the `DIFF_OPT_CLR` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_CLR(&E, fld)
+ E.flags.fld = 0
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_CLR(ptr, fld)
+ ptr->flags.fld = 0
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_SET` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_SET(&E, fld)
+ E.flags.fld = 1
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_SET(ptr, fld)
+ ptr->flags.fld = 1
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the set of parallel touched flags are no longer being used,
remove them.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-show is unique in that it wants to use textconv by default except
for when it is showing blobs. When asked to show a blob, show doesn't
want to use textconv unless the user explicitly requested that it be
used by providing the command line flag '--textconv'.
Currently this is done by using a parallel set of 'touched' flags which
get set every time a particular flag is set or cleared. In a future
patch we want to eliminate this parallel set of flags so instead of
relying on if the textconv flag has been touched, add a new flag
'TEXTCONV_SET_VIA_CMDLINE' which is only set if textconv is set to true
via the command line.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cannot add many more flags to the diff machinery due to the
limitations of the number of flags that can be stored in a single
unsigned int. In order to allow for more flags to be added to the diff
machinery in the future this patch converts the flags to be stored in
bitfields in 'struct diff_flags'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the revision traversal machinery is given a pathspec,
we must compute the parent-diff for each commit to determine
which ones are TREESAME. We set the QUICK diff flag to avoid
looking at more entries than we need; we really just care
whether there are any changes at all.
But there is one case where we want to know a bit more: if
--remove-empty is set, we care about finding cases where the
change consists only of added entries (in which case we may
prune the parent in try_to_simplify_commit()). To cover that
case, our file_add_remove() callback does not quit the diff
upon seeing an added entry; it keeps looking for other types
of entries.
But this means when --remove-empty is not set (and it is not
by default), we compute more of the diff than is necessary.
You can see this in a pathological case where a commit adds
a very large number of entries, and we limit based on a
broad pathspec. E.g.:
perl -e '
chomp(my $blob = `git hash-object -w --stdin </dev/null`);
for my $a (1..1000) {
for my $b (1..1000) {
print "100644 $blob\t$a/$b\n";
}
}
' | git update-index --index-info
git commit -qm add
git rev-list HEAD -- .
This case takes about 100ms now, but after this patch only
needs 6ms. That's not a huge improvement, but it's easy to
get and it protects us against even more pathological cases
(e.g., going from 1 million to 10 million files would take
ten times as long with the current code, but not increase at
all after this patch).
This is reported to minorly speed-up pathspec limiting in
real world repositories (like the 100-million-file Windows
repository), but probably won't make a noticeable difference
outside of pathological setups.
This patch actually covers the case without --remove-empty,
and the case where we see only deletions. See the in-code
comment for details.
Note that we have to add a new member to the diff_options
struct so that our callback can see the value of
revs->remove_empty_trees. This callback parameter could be
passed to the "add_remove" and "change" callbacks, but
there's not much point. They already receive the
diff_options struct, and doing it this way avoids having to
update the function signature of the other callbacks
(arguably the format_callback and output_prefix functions
could benefit from the same simplification).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing behavior of diff --color-moved=zebra does not define the
minimum size of a block at all, instead relying on a heuristic applied
later to filter out sets of adjacent moved lines that are shorter than 3
lines long. This can be confusing, because a block could thus be colored
as moved at the source but not at the destination (or vice versa),
depending on its neighbors.
Instead, teach diff that the minimum size of a block is 20 alphanumeric
characters, the same heuristic used by "git blame". This allows diff to
still exclude uninteresting lines appearing on their own (such as those
solely consisting of one or a few closing braces), as was the intention
of the adjacent-moved-line heuristic.
This requires a change in some tests in that some of their lines are no
longer considered to be part of a block, because they are too short.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any lines inside a moved block of code are not interesting. Boundaries
of blocks are only interesting if they are next to another block of moved
code.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the 'plain' mode for move detection of code. This omits the checking
for adjacent blocks, so it is not as useful. If you have a lot of the
same blocks moved in the same patch, the 'Zebra' would end up slow as it
is O(n^2) (n is number of same blocks). So this may be useful there and
is generally easy to add. Instead be very literal at the move detection,
do not skip over short blocks here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a patch consists mostly of moving blocks of code around, it can
be quite tedious to ensure that the blocks are moved verbatim, and not
undesirably modified in the move. To that end, color blocks that are
moved within the same patch differently. For example (OM, del, add,
and NM are different colors):
[OM] -void sensitive_stuff(void)
[OM] -{
[OM] - if (!is_authorized_user())
[OM] - die("unauthorized");
[OM] - sensitive_stuff(spanning,
[OM] - multiple,
[OM] - lines);
[OM] -}
void another_function()
{
[del] - printf("foo");
[add] + printf("bar");
}
[NM] +void sensitive_stuff(void)
[NM] +{
[NM] + if (!is_authorized_user())
[NM] + die("unauthorized");
[NM] + sensitive_stuff(spanning,
[NM] + multiple,
[NM] + lines);
[NM] +}
However adjacent blocks may be problematic. For example, in this
potentially malicious patch, the swapping of blocks can be spotted:
[OM] -void sensitive_stuff(void)
[OM] -{
[OMA] - if (!is_authorized_user())
[OMA] - die("unauthorized");
[OM] - sensitive_stuff(spanning,
[OM] - multiple,
[OM] - lines);
[OMA] -}
void another_function()
{
[del] - printf("foo");
[add] + printf("bar");
}
[NM] +void sensitive_stuff(void)
[NM] +{
[NMA] + sensitive_stuff(spanning,
[NMA] + multiple,
[NMA] + lines);
[NM] + if (!is_authorized_user())
[NM] + die("unauthorized");
[NMA] +}
If the moved code is larger, it is easier to hide some permutation in the
code, which is why some alternative coloring is needed.
This patch implements the first mode:
* basic alternating 'Zebra' mode
This conveys all information needed to the user. Defer customization to
later patches.
First I implemented an alternative design, which would try to fingerprint
a line by its neighbors to detect if we are in a block or at the boundary.
This idea iss error prone as it inspected each line and its neighboring
lines to determine if the line was (a) moved and (b) if was deep inside
a hunk by having matching neighboring lines. This is unreliable as the
we can construct hunks which have equal neighbors that just exceed the
number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter
as a line, that is permutated to AXYZCXYZBXYZD..').
Instead this provides a dynamic programming greedy algorithm that finds
the largest moved hunk and then has several modes on highlighting bounds.
A note on the options '--submodule=diff' and '--color-words/--word-diff':
In the conversion to use emit_line in the prior patches both submodules
as well as word diff output carefully chose to call emit_line with sign=0.
All output with sign=0 is ignored for move detection purposes in this
patch, such that no weird looking output will be generated for these
cases. This leads to another thought: We could pass on '--color-moved' to
submodules such that they color up moved lines for themselves. If we'd do
so only line moves within a repository boundary are marked up.
It is useful to have moved lines colored, but there are annoying corner
cases, such as a single line moved, that is very common. For example
in a typical patch of C code, we have closing braces that end statement
blocks or functions.
While it is technically true that these lines are moved as they show up
elsewhere, it is harmful for the review as the reviewers attention is
drawn to such a minor side annoyance.
For now let's have a simple solution of hardcoding the number of
moved lines to be at least 3 before coloring them. Note, that the
length is applied across all blocks to find the 'lonely' blocks
that pollute new code, but do not interfere with a permutated
block where each permutation has less lines than 3.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new option 'emitted_symbols' in the struct diff_options which
controls whether all output is buffered up until all output is available.
It is set internally in diff.c when necessary.
We'll have a new struct 'emitted_string' in diff.c which will be used to
buffer each line. The emitted_string will duplicate the memory of the
line to buffer as that is easiest to reason about for now. In a future
patch we may want to decrease the memory usage by not duplicating all
output for buffering but rather we may want to store offsets into the
file or in case of hunk descriptions such as the similarity score, we
could just store the relevant number and reproduce the text later on.
This approach was chosen as a first step because it is quite simple
compared to the alternative with less memory footprint.
emit_diff_symbol factors out the emission part and depending on the
diff_options->emitted_symbols the emission will be performed directly
when calling emit_diff_symbol or after the whole process is done, i.e.
by buffering we have add the possibility for a second pass over the
whole output before doing the actual output.
In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with
word-diff) we introduced a duplicate diff options struct for word
emissions as we may have different regex settings in there.
When buffering the output, we need to operate on just one buffer,
so we have to copy back the emissions of the word buffer into the
main buffer.
Unconditionally enable output via buffer in this patch as it yields
a great opportunity for testing, i.e. all the diff tests from the
test suite pass without having reordering issues (i.e. only parts
of the output got buffered, and we forgot to buffer other parts).
The test suite passes, which gives confidence that we converted all
functions to use emit_string for output.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call print_stat_summary from builtin/apply, so we still
need the version with a file pointer, so introduce
print_stat_summary_0 that uses emit_string machinery and
keep print_stat_summary with the same arguments around.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the submodule process is no longer attached to the same file pointer
'o->file' as the superprojects process, there is a different result in
color.c::check_auto_color. That is why we need to pass coloring explicitly,
such that the submodule coloring decision will be made by the child process
processing the submodule. Only DIFF_SYMBOL_SUBMODULE_PIPETHROUGH contains
color, the other symbols are for embedding the submodule output into the
superprojects output.
Remove the colors from the function signatures, as all the coloring
decisions will be made either inside the child process or the final
emit_diff_symbol, but not in the functions driving the submodule diff.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new flags field to emit_diff_symbol, that will be used by
context lines for:
* white space rules that are applicable (The first 12 bits)
Take a note in cahe.c as well, when this ws rules are extended we have
to fix the bits in the flags field.
* how the rules are evaluated (actually this double encodes the sign
of the line, but the code is easier to keep this way, bits 13,14,15)
* if the line a blank line at EOF (bit 16)
The check if new lines need to be marked up as extra lines at the end of
file, is now done unconditionally. That should be ok, as
'new_blank_line_at_eof' has a quick early return.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal logic used in "git blame" has been libified to make it
easier to use by cgit.
* js/blame-lib: (29 commits)
blame: move entry prepend to libgit
blame: move scoreboard setup to libgit
blame: move scoreboard-related methods to libgit
blame: move fake-commit-related methods to libgit
blame: move origin-related methods to libgit
blame: move core structures to header
blame: create entry prepend function
blame: create scoreboard setup function
blame: create scoreboard init function
blame: rework methods that determine 'final' commit
blame: wrap blame_sort and compare_blame_final
blame: move progress updates to a scoreboard callback
blame: make sanity_check use a callback in scoreboard
blame: move no_whole_file_rename flag to scoreboard
blame: move xdl_opts flags to scoreboard
blame: move show_root flag to scoreboard
blame: move reverse flag to scoreboard
blame: move contents_from to scoreboard
blame: move copy/move thresholds to scoreboard
blame: move stat counters to scoreboard
...
Convert diff_change to take a struct object_id. In addition convert the
function pointer type 'change_fn_t' to also take a struct object_id.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert diff_addremove to take a struct object_id. In addtion convert
the function pointer type 'add_remove_fn_t' to also take a struct
object_id.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
textconv_object is used in places other than blame.c and should be moved
to a more appropriate location. Other textconv related functions are
located in diff.c so that seems as good a place as any.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to convert parse_tree_indirect.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When new paths were added by "git add -N" to the index, it was
enough to circumvent the check by "git commit" to refrain from
making an empty commit without "--allow-empty". The same logic
prevented "git status" to show such a path as "new file" in the
"Changes not staged for commit" section.
* nd/ita-empty-commit:
commit: don't be fooled by ita entries when creating initial commit
commit: fix empty commit creation when there's no changes but ita entries
diff: add --ita-[in]visible-in-index
diff-lib: allow ita entries treated as "not yet exist in index"
Since we're modifying this function anyway, it's a good time
to update it to the more modern "struct oid". We can also
drop some of the magic numbers in favor of GIT_SHA1_HEXSZ,
along with some descriptive comments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "align" describes how the function actually differs
from find_unique_abbrev, and will make it less confusing
when we add more diff-specific abbrevation functions that do
not do this alignment.
Since this is a globally available function, let's also move
its descriptive comment to the header file, where we
typically document function interfaces.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If i-t-a entries are present and there is no change between the index
and HEAD i-t-a entries, index_differs_from() still returns "dirty, new
entries" (aka, the resulting commit is not empty), but cache-tree will
skip i-t-a entries and produce the exact same tree of current
commit.
index_differs_from() is supposed to catch this so we can abort
git-commit (unless --no-empty is specified). Update it to optionally
ignore i-t-a entries when doing a diff between the index and HEAD so
that it would return "no change" in this case and abort commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing the index and the working tree to show which paths are
new, and comparing the tree recorded in the HEAD and the index to see if
committing the contents recorded in the index would result in an empty
commit, we would want the former comparison to say "these are new paths"
and the latter to say "there is no change" for paths that are marked as
intent-to-add.
We made a similar attempt at d95d728a ("diff-lib.c: adjust position of
i-t-a entries in diff", 2015-03-16), which redefined the semantics of
these two comparison modes globally, which was a disaster and had to be
reverted at 78cc1a54 ("Revert "diff-lib.c: adjust position of i-t-a
entries in diff"", 2015-06-23).
To make sure we do not repeat the same mistake, introduce a new internal
diffopt option so that this different semantics can be asked for only by
callers that ask it, while making sure other unaudited callers will get
the same comparison result.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git diff" can be made easier to read by selecting
which lines are common and which lines are added/deleted
intelligently when the lines before and after the changed section
are the same. A command line option is added to help with the
experiment to find a good heuristics.
* mh/diff-indent-heuristic:
blame: honor the diff heuristic options and config
parse-options: add parse_opt_unknown_cb()
diff: improve positioning of add/delete blocks in diffs
xdl_change_compact(): introduce the concept of a change group
recs_match(): take two xrecord_t pointers as arguments
is_blank_line(): take a single xrecord_t as argument
xdl_change_compact(): only use heuristic if group can't be matched
xdl_change_compact(): fix compaction heuristic to adjust ixo
Teach "git blame" and "git annotate" the --compaction-heuristic and
--indent-heuristic options that are now supported by "git diff".
Also teach them to honor the `diff.compactionHeuristic` and
`diff.indentHeuristic` configuration options.
It would be conceivable to introduce separate configuration options for
"blame" and "annotate"; for example `blame.compactionHeuristic` and
`blame.indentHeuristic`. But it would be confusing to users if blame
output is inconsistent with diff output, so it makes more sense for them
to respect the same configuration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git diff --submodule={short,log}" mechanism has been enhanced
to allow "--submodule=diff" to show the patch between the submodule
commits bound to the superproject.
* jk/diff-submodule-diff-inline:
diff: teach diff to display submodule difference with an inline diff
submodule: refactor show_submodule_summary with helper function
submodule: convert show_submodule_summary to use struct object_id *
allow do_submodule_path to work even if submodule isn't checked out
diff: prepare for additional submodule formats
graph: add support for --line-prefix on all graph-aware output
diff.c: remove output_prefix_length field
cache: add empty_tree_oid object and helper function
Teach git-diff and friends a new format for displaying the difference
of a submodule. The new format is an inline diff of the contents of the
submodule between the commit range of the update. This allows the user
to see the actual code change caused by a submodule update.
Add tests for the new format and option.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch will add a new format for displaying the difference of
a submodule. Make it easier by changing how we store the current
selected format. Replace the DIFF_OPT flag with an enumeration, as each
format will be mutually exclusive.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
