Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
"git apply" that is used as a better "patch -p1" failed to apply a
taken from a file with CRLF line endings to a file with CRLF line
endings. The root cause was because it misused convert_to_git()
that tried to do "safe-crlf" processing by looking at the index
entry at the same path, which is a nonsense---in that mode, "apply"
is not working on the data in (or derived from) the index at all.
This has been fixed.
* tb/apply-with-crlf:
apply: file commited with CRLF should roundtrip diff and apply
convert: add SAFE_CRLF_KEEP_CRLF
Test update to improve coverage for "git stash" operations.
* jt/stash-tests:
stash: add a test for stashing in a detached state
stash: add a test for when apply fails during stash branch
stash: add a test for stash create with no files
"git interpret-trailers" has been taught a "--parse" and a few
other options to make it easier for scripts to grab existing
trailer lines from a commit log message.
* jk/trailers-parse:
doc/interpret-trailers: fix "the this" typo
pretty: support normalization options for %(trailers)
t4205: refactor %(trailers) tests
pretty: move trailer formatting to trailer.c
interpret-trailers: add --parse convenience option
interpret-trailers: add an option to unfold values
interpret-trailers: add an option to show only existing trailers
interpret-trailers: add an option to show only the trailers
trailer: put process_trailers() options into a struct
"git interpret-trailers" learned to take the trailer specifications
from the command line that overrides the configured values.
* pb/trailers-from-command-line:
interpret-trailers: fix documentation typo
interpret-trailers: add options for actions
trailers: introduce struct new_trailer_item
trailers: export action enums and corresponding lookup functions
A handful of bugfixes and an improvement to "diff --color-moved".
* jt/diff-color-move-fix:
diff: define block by number of alphanumeric chars
diff: respect MIN_BLOCK_LENGTH for last block
diff: avoid redundantly clearing a flag
"git diff" has been taught to optionally paint new lines that are
the same as deleted lines elsewhere differently from genuinely new
lines.
* sb/diff-color-move: (25 commits)
diff: document the new --color-moved setting
diff.c: add dimming to moved line detection
diff.c: color moved lines differently, plain mode
diff.c: color moved lines differently
diff.c: buffer all output if asked to
diff.c: emit_diff_symbol learns about DIFF_SYMBOL_SUMMARY
diff.c: emit_diff_symbol learns about DIFF_SYMBOL_STAT_SEP
diff.c: convert word diffing to use emit_diff_symbol
diff.c: convert show_stats to use emit_diff_symbol
diff.c: convert emit_binary_diff_body to use emit_diff_symbol
submodule.c: migrate diff output to use emit_diff_symbol
diff.c: emit_diff_symbol learns DIFF_SYMBOL_REWRITE_DIFF
diff.c: emit_diff_symbol learns about DIFF_SYMBOL_BINARY_FILES
diff.c: emit_diff_symbol learns DIFF_SYMBOL_HEADER
diff.c: emit_diff_symbol learns DIFF_SYMBOL_FILEPAIR_{PLUS, MINUS}
diff.c: emit_diff_symbol learns DIFF_SYMBOL_CONTEXT_INCOMPLETE
diff.c: emit_diff_symbol learns DIFF_SYMBOL_WORDS[_PORCELAIN]
diff.c: migrate emit_line_checked to use emit_diff_symbol
diff.c: emit_diff_symbol learns DIFF_SYMBOL_NO_LF_EOF
diff.c: emit_diff_symbol learns DIFF_SYMBOL_CONTEXT_FRAGINFO
...
Note that add_other_reflogs_to_pending() is a bit inefficient, since
it scans reflog for all refs of each worktree, including shared refs,
so the shared ref's reflog is scanned over and over again.
We could update refs API to pass "per-worktree only" flag to avoid
that. But long term we should be able to obtain a "per-worktree only"
ref store and would need to revert the changes in reflog iteration
API. So let's just wait until then.
add_reflogs_to_pending() is called by reachable.c so by default "git
prune" will examine reflog from all worktrees.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs/bisect is unfortunately per-worktree, so we need to look in
per-worktree logs/refs/bisect in addition to per-repo logs/refs. The
current iterator only goes through per-repo logs/refs.
Use merge iterator to walk two ref stores at the same time and pick
per-worktree refs from the right iterator.
PS. Note the unsorted order of for_each_reflog in the test. This is
supposed to be OK, for now. If we enforce order on for_each_reflog()
then some more work will be required.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless single_worktree is set, --all now adds HEAD from all worktrees.
Since reachable.c code does not use setup_revisions(), we need to call
other_head_refs_submodule() explicitly there to have the same effect on
"git prune", so that we won't accidentally delete objects needed by some
other HEADs.
A new FIXME is added because we would need something like
int refs_other_head_refs(struct ref_store *, each_ref_fn, cb_data);
in addition to other_head_refs() to handle it, which might require
int get_submodule_worktrees(const char *submodule, int flags);
It could be a separate topic to reduce the scope of this one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the result of single_worktree flag never being set (no way to up
until now). To get objects from current index only, set single_worktree.
The other add_index_objects_to_pending's caller is mark_reachable_objects()
(e.g. "git prune") which also mark objects from all indexes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a followup over 9d33439 (send-email: only allow one address
per body tag, 2017-02-20). The first iteration did allow writting
Cc: <foo@example.com> # garbage
but did so by matching the regex ([^>]*>?), i.e. stop after the first
instance of '>'. However, it did not properly deal with
Cc: foo@example.com # garbage
Fix this using a new function strip_garbage_one_address, which does
essentially what the old ([^>]*>?) was doing, but dealing with more
corner-cases. Since we've allowed
Cc: "Foo # Bar" <foobar@example.com>
in previous versions, it makes sense to continue allowing it (but we
still remove any garbage after it). OTOH, when an address is given
without quoting, we just take the first word and ignore everything
after.
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two bugs that sort of work together and cause
problems. Let's start with one in replace_each_worktree_head_symref.
Before fa099d2322 (worktree.c: kill parse_ref() in favor of
refs_resolve_ref_unsafe() - 2017-04-24), this code looks like this:
if (strcmp(oldref, worktrees[i]->head_ref))
continue;
set_worktree_head_symref(...);
After fa099d2322, it is possible that head_ref can be NULL. However,
the updated code takes the wrong exit. In the error case (NULL
head_ref), we should "continue;" to the next worktree. The updated
code makes us _skip_ "continue;" and update HEAD anyway.
The NULL head_ref is triggered by the second bug in add_head_info (in
the same commit). With the flag RESOLVE_REF_READING, resolve_ref_unsafe()
will abort if it cannot resolve the target ref. For orphan checkouts,
HEAD always points to an unborned branch, resolving target ref will
always fail. Now we have NULL head_ref. Now we always update HEAD.
Correct the logic in replace_ function so that we don't accidentally
update HEAD on error. As it turns out, correcting the logic bug above
breaks branch renaming completely, thanks to the second bug.
"git branch -[Mm]" does two steps (on a normal checkout, no orphan!):
- rename the branch on disk (e.g. refs/heads/abc to refs/heads/def)
- update HEAD if it points to the branch being renamed.
At the second step, since the branch pointed to by HEAD (e.g. "abc") no
longer exists on disk, we run into a temporary orphan checkout situation
that has been just corrected to _not_ update HEAD. But we need to update
HEAD since it's not actually an orphan checkout. We need to update HEAD
to move out of that orphan state.
Correct add_head_info(), remove RESOLVE_REF_READING flag. With the flag
gone, we should always return good "head_ref" in orphan checkouts (either
temporary or permanent). With good head_ref, things start to work again.
Noticed-by: Nish Aravamudan <nish.aravamudan@canonical.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* jt/subprocess-handshake:
sub-process: refactor handshake to common function
Documentation: migrate sub-process docs to header
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
"git grep -L" and "git grep --quiet -L" reported different exit
codes; this has been corrected.
* as/grep-quiet-no-match-exit-code-fix:
git-grep: correct exit code with --quiet and -L
"git stash -u" used the contents of the committed version of the
".gitignore" file to decide which paths are ignored, even when the
file has local changes. The command has been taught to instead use
the locally modified contents.
* nm/stash-untracked:
stash: clean untracked files before reset
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the `git merge` process is killed while waiting for the editor to
finish, the merge state is lost but the prepared merge msg and tree is kept.
So, a subsequent `git commit` creates a squashed merge even when the
user asked for proper merge commit originally.
Demonstrate the problem with a test crafted after the in t7502. The test
requires EXECKEEPSPID (thus does not run under MINGW).
Save the merge state earlier (in the non-squash case) so that it does
not get lost. This makes the test pass.
Reported-by: hIpPy <hippy2981@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two configuration variables are described in the documentation
to take an expiry period expressed in the number of days:
gc.rerereResolved::
Records of conflicted merge you resolved earlier are
kept for this many days when 'git rerere gc' is run.
The default is 60 days.
gc.rerereUnresolved::
Records of conflicted merge you have not resolved are
kept for this many days when 'git rerere gc' is run.
The default is 15 days.
There is no strong reason not to allow a more general "approxidate"
expiry specification, e.g. "5.days.ago", or "never".
Rename the config_get_expiry() helper introduced in the previous
step to git_config_get_expiry_in_days() and move it to a more
generic place, config.c, and use date.c::parse_expiry_date() to do
so. Give it an ability to allow the caller to tell among three
cases (i.e. there is no "gc.rerereResolved" config, there is and it
is correctly parsed into the *expiry variable, and there was an
error in parsing the given value). The current caller can work
correctly without using the return value, though.
In the future, we may find other variables that only allow an
integer that specifies "this many days" or other unit of time, and
when it happens we may need to drop "_days" suffix from the name of
the function and instead pass the "scale" value as another parameter.
But this will do for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test creates a rerere database entry that is two days old, and
tries to expire with three different custom expiry configuration
(keep ones less than 5 days old, keep ones used less than 5 days
ago, and expire everything right now).
We'll be introducing a different way to spell the same "5 days" and
"right now" parameter in a later step; parameterize the test to make
it easier to test the new spelling when it happens.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the "rerere gc with custom expiry" test up, so that it is close
to the existing basic "rerere gc" tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test blindly trusted that there may be _some_ entries left in
the rerere database, and used them by updating their timestamps to
see if the gc threshold variables are honoured correctly. This
won't work if there is no entry in the database when the test
begins.
Instead, clear the rerere database, and populate it with a few known
entries (which are bogus, but for the purpose of testing "garbage
collection", it does not matter---we want to make sure we collect
old cruft, even if the files are corrupt rerere database entries),
and use them for the expiry test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "multiple identical conflicts" test counts the number of entries
in the rerere database after trying a handful of mergy operations
and recording their resolutions, but without initializing the rerere
database to a known state, allowing the state left by previous tests
to trigger a false failure. Make it robust by cleaning the database
before it starts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "ref-store" code reorganization continues.
* mh/packed-ref-store: (32 commits)
files-backend: cheapen refname_available check when locking refs
packed_ref_store: handle a packed-refs file that is a symlink
read_packed_refs(): die if `packed-refs` contains bogus data
t3210: add some tests of bogus packed-refs file contents
repack_without_refs(): don't lock or unlock the packed refs
commit_packed_refs(): remove call to `packed_refs_unlock()`
clear_packed_ref_cache(): don't protest if the lock is held
packed_refs_unlock(), packed_refs_is_locked(): new functions
packed_refs_lock(): report errors via a `struct strbuf *err`
packed_refs_lock(): function renamed from lock_packed_refs()
commit_packed_refs(): use a staging file separate from the lockfile
commit_packed_refs(): report errors rather than dying
packed_ref_store: make class into a subclass of `ref_store`
packed-backend: new module for handling packed references
packed_read_raw_ref(): new function, replacing `resolve_packed_ref()`
packed_ref_store: support iteration
packed_peel_ref(): new function, extracted from `files_peel_ref()`
repack_without_refs(): take a `packed_ref_store *` parameter
get_packed_ref(): take a `packed_ref_store *` parameter
rollback_packed_refs(): take a `packed_ref_store *` parameter
...
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
Code clean-up.
* ma/parse-maybe-bool:
parse_decoration_style: drop unused argument `var`
treewide: deprecate git_config_maybe_bool, use git_parse_maybe_bool
config: make git_{config,parse}_maybe_bool equivalent
config: introduce git_parse_maybe_bool_text
t5334: document that git push --signed=1 does not work
Doc/git-{push,send-pack}: correct --sign= to --signed=
"git clone --recurse-submodules --quiet" did not pass the quiet
option down to submodules.
* bw/clone-recursive-quiet:
clone: teach recursive clones to respect -q
Commands like "git rebase" accepted the --rerere-autoupdate option
from the command line, but did not always use it. This has been
fixed.
* pw/sequence-rerere-autoupdate:
cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick/revert: remember --rerere-autoupdate
t3504: use test_commit
rebase -i: honor --rerere-autoupdate
rebase: honor --rerere-autoupdate
am: remember --rerere-autoupdate setting
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
A performance test for writing the index to be able to
determine if changes to allocating ondisk structure help.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All that we are really testing here is that the message is
correct when we are not on any branch. All other functionality is
already tested elsewhere.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the return value of merge recursive is not checked, the stash could end
up being dropped even though it was not applied properly
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file had been commited with CRLF but now .gitattributes say
"* text=auto" (or core.autocrlf is true), the following does not
roundtrip, `git apply` fails:
printf "Added line\r\n" >>file &&
git diff >patch &&
git checkout -- . &&
git apply patch
Before applying the patch, the file from working tree is converted
into the index format (clean filter, CRLF conversion, ...). Here,
when commited with CRLF, the line endings should not be converted.
Note that `git apply --index` or `git apply --cache` doesn't call
convert_to_git() because the source material is already in index
format.
Analyze the patch if there is a) any context line with CRLF, or b)
if any line with CRLF is to be removed. In this case the patch file
`patch` has mixed line endings, for a) it looks like this:
diff --git a/one b/one
index 533790e..c30dea8 100644
--- a/one
+++ b/one
@@ -1 +1,2 @@
a\r
+b\r
And for b) it looks like this:
diff --git a/one b/one
index 533790e..485540d 100644
--- a/one
+++ b/one
@@ -1 +1 @@
-a\r
+b\r
If `git apply` detects that the patch itself has CRLF, (look at the
line " a\r" or "-a\r" above), the new flag crlf_in_old is set in
"struct patch" and two things will happen:
- read_old_data() will not convert CRLF into LF by calling
convert_to_git(..., SAFE_CRLF_KEEP_CRLF);
- The WS_CR_AT_EOL bit is set in the "white space rule",
CRLF are no longer treated as white space.
While at there, make it clear that read_old_data() in apply.c knows
what it wants convert_to_git() to do with respect to CRLF. In fact,
this codepath is about applying a patch to a file in the filesystem,
which may not exist in the index, or may exist but may not match
what is recorded in the index, or in the extreme case, we may not
even be in a Git repository. If convert_to_git() peeked at the
index while doing its work, it *would* be a bug.
Pass NULL instead of &the_index to convert_to_git() to make sure we
catch future bugs to clarify this.
Update the test in t4124: split one test case into 3:
- Detect the " a\r" line in the patch
- Detect the "-a\r" line in the patch
- Use LF in repo and CLRF in the worktree.
Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reject directories with the attribute export-ignore already while
queuing them. This prevents read_tree_recursive() from descending into
them and this avoids write_archive_entry() rejecting them later on,
which queue_or_write_archive_entry() is not prepared for.
Borrow the existing strbuf to build the full path to avoid string
copies and extra allocations; just make sure we restore the original
value before moving on.
Keep checking any other attributes in write_archive_entry() as before,
but avoid checking them twice.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Demonstrate mishandling of the attribute export-ignore by git archive
when used together with pathspecs. Wildcard pathspecs can even cause it
to abort. And a directory excluded without a wildcard is still included
as an empty folder in the archive.
Test-case-by: David Adam <zanchey@ucc.gu.uwa.edu.au>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handling of `status_only` no longer interferes with the handling of
`unmatch_name_only`. `--quiet` no longer affects the exit code when using
`-L`/`--files-without-match`.
Signed-off-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--set-upstream' option of branch was deprecated in b347d06b
("branch: deprecate --set-upstream and show help if we detect
possible mistaken use", 2012-08-30) and has been planned for removal
ever since.
In order to prevent "--set-upstream" on a command line from being taken as
an abbreviated form of "--set-upstream-to", explicitly catch "--set-upstream"
option and die, instead of just removing it from the list of options.
Before this change, an attempt to use "--set-upstream" resulted in:
$ git branch
* master
$ git branch --set-upstream origin/master
The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
Branch origin/master set up to track local branch master.
$ echo $?
0
$ git branch
* master
origin/master
With this change, the behaviour becomes like this:
$ git branch
* master
$ git branch --set-upstream origin/master
fatal: the '--set-upstream' option is no longer supported. Please use '--track' or '--set-upstream-to' instead.
$ echo $?
128
$ git branch
* master
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoiding the clean up step of tests may help in some cases but in other
cases they cause the other unrelated tests to fail for unobvious reasons.
It's better to cleanup a few things to keep other tests from failing
as a result of it.
So, cleanup a cruft left behind by an old test in order for the changes that
are to be introduced to be independent of it.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing behavior of diff --color-moved=zebra does not define the
minimum size of a block at all, instead relying on a heuristic applied
later to filter out sets of adjacent moved lines that are shorter than 3
lines long. This can be confusing, because a block could thus be colored
as moved at the source but not at the destination (or vice versa),
depending on its neighbors.
Instead, teach diff that the minimum size of a block is 20 alphanumeric
characters, the same heuristic used by "git blame". This allows diff to
still exclude uninteresting lines appearing on their own (such as those
solely consisting of one or a few closing braces), as was the intention
of the adjacent-moved-line heuristic.
This requires a change in some tests in that some of their lines are no
longer considered to be part of a block, because they are too short.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, MIN_BLOCK_LENGTH is only checked when diff encounters a line
that does not belong to the current block. In particular, this means
that MIN_BLOCK_LENGTH is not checked after all lines are encountered.
Perform that check.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sum(1) is a command for calculating checksums of the contents of files.
It was part of early editions of Unix ("Research Unix", 1972/1973, [1]).
cksum(1) appeared in 4.4BSD (1993) as a replacement [2], and became part
of POSIX.1-2008 [3]. OpenBSD 5.6 (2014) removed sum(1).
We only use sum(1) in t1002 to check for changes in three files. On
MinGW we use md5sum(1) instead. We could switch to the standard command
cksum(1) for all platforms; MinGW comes with GNU coreutils now, which
provides sum(1), cksum(1) and md5sum(1). Use our standard method for
checking for file changes instead: test_cmp.
It's more convenient because it shows differences nicely, it's faster on
MinGW because we have a special implementation there based only on
shell-internal commands, it's simpler as it allows us to avoid stripping
out unnecessary entries from the checksum file using grep(1), and it's
more consistent with the rest of the test suite.
We already compare changed files with their expected new contents using
diff(1), so we don't need to check with "test_must_fail test_cmp" if
they differ from their original state. A later patch could convert the
direct diff(1) calls to test_cmp as well.
With all sum(1) calls gone, remove the MinGW-specific implementation
from test-lib.sh as well.
[1] http://minnie.tuhs.org/cgi-bin/utree.pl?file=V3/man/man1/sum.1
[2] http://minnie.tuhs.org/cgi-bin/utree.pl?file=4.4BSD/usr/share/man/cat1/cksum.0
[3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/cksum.html
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret-trailers command recently learned some options
to make its output easier to parse (for a caller whose only
interested in picking out the trailer values). But it's not
very efficient for asking for the trailers of many commits
in a single invocation.
We already have "%(trailers)" to do that, but it doesn't
know about unfolding or omitting non-trailers. Let's plumb
those options through, so you can have the best of both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have one test for %(trailers). In preparation
for more, let's refactor a few bits:
- move the commit creation to its own setup step so it can
be reused by multiple tests
- add a trailer with whitespace continuation (to confirm
that it is left untouched)
- fix the sample text which claims the placeholder is %bT.
This was switched long ago to %(trailers)
- replace one "cat" with an "echo" when generating the
expected output. This saves a process (and sets a better
pattern for future tests to follow).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of "--only-trailers" is to give a caller an output
that's easy for them to parse. Getting rid of the
non-trailer material helps, but we still may see more
complicated syntax like whitespace continuation. Let's add
an option to unfold any continuation, giving the output as a
single "key: value" line per trailer.
As a bonus, this could be used even without --only-trailers
to clean up unusual formatting in the incoming data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to invoke interpret-trailers for the
primary purpose of parsing existing trailers. But in that
case, we don't want to apply existing ifMissing or ifExists
rules from the config. Let's add a special mode where we
avoid applying those rules. Coupled with --only-trailers,
this gives us a reasonable parsing tool.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In theory it's easy for any reader who wants to parse
trailers to do so. But there are a lot of subtle corner
cases around what counts as a trailer, when the trailer
block begins and ends, etc. Since interpret-trailers already
has our parsing logic, let's let callers ask it to just
output the trailers.
They still have to parse the "key: value" lines, but at
least they can ignore all of the other corner cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow using non-default values for trailers without having to set
them up in .gitconfig first. For example, if you have the following
configuration
trailer.signed-off-by.where = end
you may use "--where before" when a patch author forgets his
Signed-off-by and provides it in a separate email. Likewise for
--if-exists and --if-missing
Reverting to the behavior specified by .gitconfig is done with
--no-where, --no-if-exists and --no-if-missing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If calling git stash -u on a repo that contains a file that is not
ignored any more due to a current modification of the gitignore file,
this file is stashed but not remove from the working tree.
This is due to git-stash first doing a reset --hard which clears the
.gitignore file modification and the call git clean, leaving the file
untouched.
This causes git stash pop to fail due to the file existing.
This patch simply switches the order between cleaning and resetting
and adds a test for this usecase.
Reported-by: Sam Partington <sam@whiteoctober.co.uk>
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "tag.pager" configuration variable was useless for those who
actually create tag objects, as it interfered with the use of an
editor. A new mechanism has been introduced for commands to enable
pager depending on what operation is being carried out to fix this,
and then "git tag -l" is made to run pager by default.
* ma/pager-per-subcommand-action:
git.c: ignore pager.* when launching builtin as dashed external
tag: change default of `pager.tag` to "on"
tag: respect `pager.tag` in list-mode only
t7006: add tests for how git tag paginates
git.c: provide setup_auto_pager()
git.c: let builtins opt for handling `pager.foo` themselves
builtin.h: take over documentation from api-builtin.txt
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
Many uses of comparision callback function the hashmap API uses
cast the callback function type when registering it to
hashmap_init(), which defeats the compile time type checking when
the callback interface changes (e.g. gaining more parameters).
The callback implementations have been updated to take "void *"
pointers and cast them to the type they expect instead.
* sb/hashmap-cleanup:
t/helper/test-hashmap: use custom data instead of duplicate cmp functions
name-hash.c: drop hashmap_cmp_fn cast
submodule-config.c: drop hashmap_cmp_fn cast
remote.c: drop hashmap_cmp_fn cast
patch-ids.c: drop hashmap_cmp_fn cast
convert/sub-process: drop cast to hashmap_cmp_fn
config.c: drop hashmap_cmp_fn cast
builtin/describe: drop hashmap_cmp_fn cast
builtin/difftool.c: drop hashmap_cmp_fn cast
attr.c: drop hashmap_cmp_fn cast
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
The filter-process interface learned to allow a process with long
latency give a "delayed" response.
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Some versions of GnuPG fails to kill gpg-agent it auto-spawned
and such a left-over agent can interfere with a test. Work it
around by attempting to kill one before starting a new test.
* st/lib-gpg-kill-stray-agent:
t: lib-gpg: flush gpg agent on startup
Start using selected c99 constructs in small, stable and
essentialpart of the system to catch people who care about
older compilers that do not grok them.
* jk/c99:
clean.c: use designated initializer
strbuf: use designated initializers in STRBUF_INIT
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
The advice message given when "git rebase" stops for conflicting
changes has been improved.
* wd/rebase-conflict-guide:
rebase: make resolve message clearer for inexperienced users
Conversion from uchar[20] to struct object_id continues.
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
v1.2.0~121 (New tutorial, 2006-01-22) rewrote the tutorial such that the
original intent of 2ae6c70674 (Adapt tutorial to cygwin and add test case,
2005-10-13) to test the examples from the tutorial doesn't hold any more.
There are dedicated tests for the commands used, even "git whatchanged",
such that removing these tests doesn't seem like a reduction in test
coverage.
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long ago in 628522ec14 (sha1-lookup: more memory efficient
search in sorted list of SHA-1, 2007-12-29) we added
sha1_entry_pos(), a binary search that uses the uniform
distribution of sha1s to scale the selection of mid-points.
As this was a performance experiment, we tied it to the
GIT_USE_LOOKUP environment variable and never enabled it by
default.
This code was successful in reducing the number of steps in
each search. But the overhead of the scaling ends up making
it slower when the cache is warm. Here are best-of-five
timings for running rev-list on linux.git, which will have
to look up every object:
$ time git rev-list --objects --all >/dev/null
real 0m35.357s
user 0m35.016s
sys 0m0.340s
$ time GIT_USE_LOOKUP=1 git rev-list --objects --all >/dev/null
real 0m37.364s
user 0m37.045s
sys 0m0.316s
The USE_LOOKUP version might have more benefit on a cold
cache, as the time to fault in each page would dominate. But
that would be for a single lookup. In practice, most
operations tend to look up many objects, and the whole pack
.idx will end up warm.
It's possible that the code could be better optimized to
compete with a naive binary search for the warm-cache case,
and we could have the best of both worlds. But over the
years nobody has done so, and this is largely dead code that
is rarely run outside of the test suite. Let's drop it in
the name of simplicity.
This lets us remove sha1_entry_pos() entirely, as the .idx
lookup code was the only caller. Note that sha1-lookup.c
still contains sha1_pos(), which differs from
sha1_entry_pos() in two ways:
- it has a different interface; it uses a function pointer
to access sha1 entries rather than a size/offset pair
describing the table's memory layout
- it only scales the initial selection of "mi", rather
than each iteration of the search
We can't get rid of this function, as it's called from
several places. It may be that we could replace it with a
simple binary search, but that's out of scope for this patch
(and would need benchmarking).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OpenBSD's regex library has a repetition limit (RE_DUP_MAX) of 255.
That's the minimum acceptable value according to POSIX. In t4062 we use
4096 repetitions in the test "-G matches", though, causing it to fail.
Combine two repetition operators, both less than 256, to arrive at 4096
zeros instead of using a single one, to fix the test on OpenBSD.
Original-patch-by: David Coppa <dcoppa@openbsd.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
76e368c378 (t3700: fix broken test under !SANITY) explains that the test
'git add --chmod=[+-]x changes index with already added file' can fail
if xfoo3 is still present as a symlink from a previous test and deletes
it with rm(1). That still leaves it present in the index, which causes
the test to fail if POSIXPERM is not defined. Get rid of it by calling
"git reset --hard" as well, as 76e368c378 already mentioned in passing.
Helped-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there was no 'Signed-off-by:' trailer but another trailer such as
'Reported-by:' then 'git am --signoff' would add a blank line between
the existing trailers and the added 'Signed-off-by:' line. e.g.
Rebase accepts '--rerere-autoupdate' as an option but only honors
it if '-m' is also given. Fix it for a non-interactive rebase by
passing on the option to 'git am' and 'git cherry-pick'.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Fix by using the code provided for this purpose in sequencer.c.
Change the tests so that they check the formatting of the
'Signed-off-by:' lines rather than just grepping for them.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both of these act on a string `value` which they parse as a boolean. The
"parse"-variant was introduced as a replacement for the "config"-variant
which for historical reasons takes an unused argument `name`. That it
was intended as a replacement is not obvious from commit 9a549d43
("config.c: rename git_config_maybe_bool_text and export it as
git_parse_maybe_bool", 2015-08-19), but that is what the background on
the mailing list suggests [1].
However, these two functions do not parse `value` in exactly the same
way. In particular, git_config_maybe_bool accepts integers (0 for false,
non-0 for true). This means there are two slightly different definitions
of "maybe_bool" in the code-base, and that every time a call to
git_config_maybe_bool is changed to use git_parse_maybe_bool, it risks
breaking someone's workflow.
Move the implementation of "config" into "parse" and make the latter a
trivial wrapper.
This also fixes the only user of git_parse_maybe_bool, `git push
--signed=..`.
[1] https://public-inbox.org/git/xmqq7fotd71o.fsf@gitster.dls.corp.google.com/
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When accepting booleans as command-line or config options throughout
Git, there are several documented synonyms for true and false.
However, one particular user is slightly broken: `git push --signed=..`
does not understand the integer synonyms for true and false.
This is hardly wanted. The --signed option has a different notion of
boolean than all other arguments and config options, including the
config option corresponding to it, push.gpgSign.
Add a test documenting the failure to handle --signed=1.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameter to basename(3) and dirname(3) traditionally had the type
"char *", but on OpenBSD it's been "const char *" for years. That
causes (at least) Clang to throw an incompatible-pointer-types warning
for test-path-utils, where we try to pass around pointers to these
functions.
Avoid this warning (which is fatal in DEVELOPER mode) by ignoring the
promise of OpenBSD's implementations to keep input strings unmodified
and enclosing them in POSIX-compatible wrappers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sub-test "init in long base path" in t0001 checks the ability to
handle long base paths with restrictive permissions (--x). On OpenBSD
getcwd(3) fails in that case even for short paths. Check the two
aspects separately by trying to use a long base path both with and
without execute-only permissions. Only attempt the former if we know
that getcwd(3) doesn't care.
Original-patch-by: David Coppa <dcoppa@openbsd.org>
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change an argument to test_line_count (which'll ultimately be turned
into a "test" expression) to use "-gt" instead of ">" for an
arithmetic test.
This broken on e.g. OpenBSD as of v2.13.0 with my commit
ac3f5a3468 ("ref-filter: add --no-contains option to
tag/branch/for-each-ref", 2017-03-24).
Downstream just worked around it by patching git and didn't tell us
about it, I discovered this when reading various Git packaging
implementations: https://github.com/openbsd/ports/commit/7e48bf88a20
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git clone --recurse-submodules' to respect the '-q' option by
passing down the quiet flag to the process which handles cloning of
submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the submodule-config subsystem can lazily read the gitmodules
file we no longer need to explicitly pre-read the gitmodules by calling
'gitmodules_config()' so let's remove it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers have been migrated to explicitly read any configuration they
need. The support for handling it automatically in submodule-config is
no longer needed.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally a submodule is comprised of a gitlink as well as a
corresponding entry in the .gitmodules file. Diff doesn't follow this
paradigm as its config callback routine falls back to populating the
submodule-config if a config entry starts with 'submodule.'.
Remove this behavior in order to be consistent with how the
submodule-config is populated, via calling 'gitmodules_config()' or
'repo_read_gitmodules()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running, e.g., `git -c alias.bar=foo bar`, we expand the alias and
execute `git-foo` as a dashed external. This is true even if git foo is
a builtin. That is on purpose, and is motivated in a comment which was
added in commit 441981bc ("git: simplify environment save/restore
logic", 2016-01-26).
Shortly before we launch a dashed external, and unless we have already
found out whether we should use a pager, we check `pager.foo`. This was
added in commit 92058e4d ("support pager.* for external commands",
2011-08-18). If the dashed external is a builtin, this does not match
that commit's intention and is arguably wrong, since it would be cleaner
if we let the "dashed external builtin" handle `pager.foo`.
This has not mattered in practice, but a recent patch taught `git-tag`
to ignore `pager.tag` under certain circumstances. But, when started
using an alias, it doesn't get the chance to do so, as outlined above.
That recent patch added a test to document this breakage.
Do not check `pager.foo` before launching a builtin as a dashed
external, i.e., if we recognize the name of the external as a builtin.
Change the test to use `test_expect_success`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch taught `git tag` to only respect `pager.tag` in
list-mode. That patch left the default value of `pager.tag` at "off".
After that patch, it makes sense to let the default value be "on"
instead, since it will help with listing many tags, but will not hurt
users of `git tag -a` as it would have before. Make that change. Update
documentation and tests.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Use the mechanisms introduced in two earlier patches to ignore
`pager.tag` in git.c and let the `git tag` builtin handle it on its own.
Only respect `pager.tag` when running in list-mode.
There is a window between where the pager is started before and after
this patch. This means that early errors can behave slightly different
before and after this patch. Since operation-parsing has to happen
inside this window, this can be seen with `git -c pager.tag="echo pager
is used" tag -l --unknown-option`. This change in paging-behavior should
be acceptable since it only affects erroneous usages.
Update the documentation and update tests.
If an alias is used to run `git tag -a`, then `pager.tag` will still be
respected. Document this known breakage. It will be fixed in a later
commit. Add a similar test for `-l`, which works.
Noticed-by: Anatoly Borodin <anatoly.borodin@gmail.com>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Since we're about to change how `git tag` respects `pager.tag`, add tests
around this, including how the configuration is ignored if --no-pager or
--paginate are used.
Construct tests with a few different subcommands. First, use -l. Second,
use "no arguments" and --contains, since those imply -l. (There are
more arguments which imply -l, but using these two should be enough.)
Third, use -a as a representative for "not -l". Actually, the tests use
`git tag -am` so no editor is launched, but that is irrelevant, since we
just want to see whether the pager is used or not. Make one of the tests
demonstrate the broken behavior mentioned above, where `git tag -a`
respects `pager.tag`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If revs->def is set (as it is in "git log") and there are no
pending objects after parsing the user's input, then we show
whatever is in "def". But if the user _did_ ask for some
input that just happened to be empty (e.g., "--glob" that
does not match anything), showing the default revision is
confusing. We should just show nothing, as that is what the
user's request yielded.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gives us no starting point for a traversal, we
want to complain with our normal usage message. But if they
tried to do so with "--all" or "--glob", but that happened
not to match any refs, the usage message isn't helpful. We
should just give them the empty output they asked for
instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 751a2ac6e (rev-list --exclude: tests, 2013-11-01), we
added a few tests for handling "empty" inputs with rev-list
(i.e., where the user gave us some pattern but it turned out
not to queue any objects for traversal), all of which were
marked as failing.
In preparation for working on this area of the code, let's
give each test a more descriptive name. Let's also include
one more case which we should cover: feeding a --glob
pattern that doesn't match anything.
We can also drop the explanatory comment; we'll be
converting these to expect_success in the next few patches,
so the discussion isn't necessary.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick and revert should not accept --[no-]rerere-autoupdate once
they have started.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
