Instead of dying when fsck hits a malformed tree object, log the error
like any other and continue. Now fsck can tell the user which tree is
bad, too.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the tree-walker runs into an error, it just calls
die(), and the message is always "corrupt tree file".
However, we are actually covering several cases here; let's
give the user a hint about what happened.
Let's also avoid using the word "corrupt", which makes it
seem like the data bit-rotted on disk. Our sha1 check would
already have found that. These errors are ones of data that
is malformed in the first place.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
1eb47f167d already converted six cases,
this patch covers three more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls. This is shorter and makes the intent clearer.
bc57b9c0cc already converted three cases,
this patch covers two more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log rev^..rev" is commonly used to show all work done on and merged
from a side branch. This patch introduces a shorthand "rev^-" for this
and additionally allows "rev^-$n" to mean "reachable from rev, excluding
what is reachable from the nth parent of rev". For example, for a
two-parent merge, you can use rev^-2 to get the set of commits which were
made to the main branch while the topic branch was prepared.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command accesses default_abbrev (defined in environment.c and is
updated via core.abbrev configuration), but never makes any call to
git_config(). The output from "worktree list" ignores the abbrev
setting for this reason.
Make a call to git_config() to read the default set of configuration
variables at the beginning of the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find ambiguous short sha1s, we may get a
disambiguation rule from our caller's context. But if we
don't, we fall back to treating all sha1s the same, even
though most projects will tend to refer only to commits by
their short sha1s.
This patch introduces a configuration option that lets the
user pick a different fallback (e.g., only commits). It's
possible that we may want to make this the default, but it's
a good idea to start as a config option for two reasons:
1. It lets people experiment with this and see if it's a
good idea (i.e., the "tend to" above is an assumption;
we don't really know if this will break some obscure
cases).
2. Even if we do flip the default, it gives people an
escape hatch if it causes problems (you can sometimes
override it by asking for "1234^{tree}", but not all
combinations are possible).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e8adf23 (xdl_change_compact(): introduce the concept
of a change group, 2016-08-22) added a "struct group" type
to xdiff/xdiffi.c. But the POSIX system header "grp.h"
already defines "struct group" (it is part of the getgrnam
interface). This happens to work because the new type is
local to xdiffi.c, and the xdiff code includes a relatively
small set of system headers. But it will break compilation
if xdiff ever switches to using git-compat-util.h. It can
also probably cause confusion with tools that look at the
whole code base, like coccinelle or ctags.
Let's resolve by giving the xdiff variant a scoped name,
which is closer to other xdiff types anyway (e.g.,
xdlfile_t, though note that xdiff is fond if typedefs when
Git usually is not).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --recurse-submodules" lost the progress eye-candy in
recent update, which has been corrected.
* jk/clone-recursive-progress:
clone: pass --progress decision to recursive submodules
Documentation around tools to import from CVS was fairly outdated.
* jk/doc-cvs-update:
docs/cvs-migration: mention cvsimport caveats
docs/cvs-migration: update link to cvsps homepage
docs/cvsimport: prefer cvs-fast-export to parsecvs
When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").
* rt/rebase-i-broken-insn-advise:
rebase -i: improve advice on bad instruction lines
The procedure to build Git on Mac OS X for Travis CI hardcoded the
internal directory structure we assumed HomeBrew uses, which was a
no-no. The procedure has been updated to ask HomeBrew things we
need to know to fix this.
* ls/travis-homebrew-path-fix:
travis-ci: ask homebrew for its path instead of hardcoding it
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
"git checkout <word>" does not follow the usual disambiguation
rules when the <word> can be both a rev and a path, to allow
checking out a branch 'foo' in a project that happens to have a
file 'foo' in the working tree without having to disambiguate.
This was poorly documented and the check was incorrect when the
command was run from a subdirectory.
* nd/checkout-disambiguation:
checkout: fix ambiguity check in subdir
checkout.txt: document a common case that ignores ambiguation rules
checkout: add some spaces between code and comment
Even more i18n.
* va/i18n-more:
i18n: stash: mark messages for translation
i18n: notes-merge: mark die messages for translation
i18n: ident: mark hint for translation
i18n: i18n: diff: mark die messages for translation
i18n: connect: mark die messages for translation
i18n: commit: mark message for translation
In some projects, it is common to use "[RFC PATCH]" as the subject
prefix for a patch meant for discussion rather than application. A
new option "--rfc" was a short-hand for "--subject-prefix=RFC PATCH"
to help the participants of such projects.
* jt/format-patch-rfc:
format-patch: add "--rfc" for the common case of [RFC PATCH]
A shell script example in check-ref-format documentation has been
fixed.
* ep/doc-check-ref-format-example:
git-check-ref-format.txt: fixup documentation
Output from "git diff" can be made easier to read by selecting
which lines are common and which lines are added/deleted
intelligently when the lines before and after the changed section
are the same. A command line option is added to help with the
experiment to find a good heuristics.
* mh/diff-indent-heuristic:
blame: honor the diff heuristic options and config
parse-options: add parse_opt_unknown_cb()
diff: improve positioning of add/delete blocks in diffs
xdl_change_compact(): introduce the concept of a change group
recs_match(): take two xrecord_t pointers as arguments
is_blank_line(): take a single xrecord_t as argument
xdl_change_compact(): only use heuristic if group can't be matched
xdl_change_compact(): fix compaction heuristic to adjust ixo
The pretty-format specifier "%C(auto)" used by the "log" family of
commands to enable coloring of the output is taught to also issue a
color-reset sequence to the output.
* rs/c-auto-resets-attributes:
pretty: let %C(auto) reset all attributes
Documentation for individual configuration variables to control use
of color (like `color.grep`) said that their default value is
'false', instead of saying their default is taken from `color.ui`.
When we updated the default value for color.ui from 'false' to
'auto' quite a while ago, all of them broke. This has been
corrected.
* mm/config-color-ui-default-to-auto:
Documentation/config: default for color.* is color.ui
Code cleanup.
* rs/cocci:
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
When the user gives us an ambiguous short sha1, we print an
error and refuse to resolve it. In some cases, the next step
is for them to feed us more characters (e.g., if they were
retyping or cut-and-pasting from a full sha1). But in other
cases, that might be all they have. For example, an old
commit message may have used a 7-character hex that was
unique at the time, but is now ambiguous. Git doesn't
provide any information about the ambiguous objects it
found, so it's hard for the user to find out which one they
probably meant.
This patch teaches get_short_sha1() to list the sha1s of the
objects it found, along with a few bits of information that
may help the user decide which one they meant. Here's what
it looks like on git.git:
$ git rev-parse b2e1
error: short SHA1 b2e1 is ambiguous
hint: The candidates are:
hint: b2e1196 tag v2.8.0-rc1
hint: b2e11d1 tree
hint: b2e1632 commit 2007-11-14 - Merge branch 'bs/maint-commit-options'
hint: b2e1759 blob
hint: b2e18954 blob
hint: b2e1895c blob
fatal: ambiguous argument 'b2e1': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
We show the tagname for tags, and the date and subject for
commits. For trees and blobs, in theory we could dig in the
history to find the paths at which they were present. But
that's very expensive (on the order of 30s for the kernel),
and it's not likely to be all that helpful. Most short
references are to commits, so the useful information is
typically going to be that the object in question _isn't_ a
commit. So it's silly to spend a lot of CPU preemptively
digging up the path; the user can do it themselves if they
really need to.
And of course it's somewhat ironic that we abbreviate the
sha1s in the disambiguation hint. But full sha1s would cause
annoying line wrapping for the commit lines, and presumably
the user is going to just re-issue their command immediately
with the corrected sha1.
We also restrict the list to those that match any
disambiguation hint. E.g.:
$ git rev-parse b2e1:foo
error: short SHA1 b2e1 is ambiguous
hint: The candidates are:
hint: b2e1196 tag v2.8.0-rc1
hint: b2e11d1 tree
hint: b2e1632 commit 2007-11-14 - Merge branch 'bs/maint-commit-options'
fatal: Invalid object name 'b2e1'.
does not bother reporting the blobs, because they cannot
work as a treeish.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an object appears multiple times in the object database
(e.g., in both loose and packed form, or in two separate
packs), the disambiguation machinery may see it more than
once. The get_short_sha1() function handles this already,
but for_each_abbrev() blindly fires the callback for each
instance it finds.
We can fix this by collecting the output in a sha1 array and
de-duplicating it. As a bonus, the sort done for the
de-duplication means that our output will be stable,
regardless of the order in which the objects are found.
Note that the old code normalized the callback's output to
0/1 to store in the 1-bit ds->ambiguous flag (which both
halted the iteration and was returned from the
for_each_abbrev function). Now that we are using sha1_array,
we can return the real value. In practice, it doesn't matter
as the sole caller only ever returns 0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callbacks for iterating a sha1_array must have a void
return. This is unlike our usual for_each semantics, where
a callback may interrupt iteration and have its value
propagated. Let's switch it to the usual form, which will
enable its use in more places (e.g., where we are replacing
an existing iteration with a different data structure).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a human-readable message, and there's no reason it
should not be translated. While we're at it, let's drop the
period from the end, which is not our usual style.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We store the hex prefix in a 40-byte buffer with the prefix
itself followed by 40-minus-len "x" characters. These x's
serve no purpose, and the lack of NUL termination makes the
prefix string annoying to use. Let's just terminate it.
Note that this is in contrast to the binary prefix, which
_must_ be zero-padded, because we look at the whole thing
during a binary search to find the first potential match in
each pack index. The loose-object hex search cannot use the
same trick because it has to do a linear walk through the
unsorted results of readdir() (and even if it could, you'd
want zeroes instead of x's).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The disambiguation machinery has two callers: get_short_sha1
and for_each_abbrev. Both need to repeat much of the same
setup: declaring buffers, sanity-checking lengths, preparing
the prefixes, etc. Let's pull that into a single init
function so we can avoid repeating ourselves.
Pulling the buffers into the "struct disambiguate_state"
isn't strictly necessary, but it does make things simpler
for the callers, who no longer have to worry about sizing
them correctly (i.e., it's an implicit requirement that
the caller provide 20- and 40-byte buffers).
And while we're touching this code, we can convert any
magic-number sizes to the more modern GIT_SHA1_* constants.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The treeish disambiguation function tries to peel tags, but
it does so by calling:
deref_tag(lookup_object(sha1), ...);
This will only work if we have previously looked at the tag
and created a "struct tag" for it. Since parsing revision
arguments typically happens before anything else, this is
usually not the case, and we would fail to peel the tag (we
are lucky that deref_tag() gracefully handles the NULL and
does not segfault).
Instead, we can use parse_object(). Note that this is the
same fix done by 94d75d1 (get_short_sha1(): correctly
disambiguate type-limited abbreviation, 2013-07-01), but
that commit fixed only the committish disambiguator, and
left the bug in the treeish one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_sha1() function is actually implementation by many
sub-functions, but we do not always pass our flags around to
all of those functions. As a result, we may forget that our
caller asked us to resolve with GET_SHA1_QUIETLY and output
messages. The two triggerable cases are:
1. Resolving treeish:path will resolve the "treeish"
portion using GET_SHA1_TREEISH, dropping all other
flags.
2. The peel_onion() function did not take flags at all
but recurses to get_sha1_1(), which does.
The solution for both is to bitwise-OR their new flags with
the existing ones (after dropping any mutually exclusive
disambiguation flags).
This bug can trigger with "git rev-parse --quiet", which
asks for quiet resolution. But it can also happen in a more
vanilla code path when we do a follow-up ONLY_TO_DIE
invocation of get_sha1(), and that's what the tests check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the revision code cannot parse an argument like
"HEAD:foo", it will call maybe_die_on_misspelt_object_name(),
which re-runs get_sha1() with an extra ONLY_TO_DIE flag. We
then spend more effort to generate a better error message.
Unfortunately, a side effect is that our second call may
repeat the same error messages from the original get_sha1()
call. You can see this with:
$ git show 0017
error: short SHA1 0017 is ambiguous.
error: short SHA1 0017 is ambiguous.
fatal: ambiguous argument '0017': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
where the second "error:" line comes from the ONLY_TO_DIE
call.
To fix this, we can make ONLY_TO_DIE imply QUIETLY. This is
a little odd, because the whole point of ONLY_TO_DIE is to
output error messages. But what we want to do is tell the
rest of the get_sha1() code (particularly get_sha1_1()) that
the _regular_ messages should be quiet, but the only-to-die
ones should not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_sha1() family of functions takes a flags field, but
some of the flags are mutually exclusive. In particular, we
can only handle one disambiguating function, and the flags
quietly override each other. Let's instead detect these as
programming bugs.
Technically some of the flags are supersets of the others,
so treating COMMITTISH|TREEISH as just COMMITTISH is not
wrong, but it's a good sign the caller is confused. And
certainly asking for BLOB|TREE does not work.
We can do the check easily with some bit-twiddling, and as a
bonus, the bit-mask of disambiguators will come in handy in
a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When opening a loose object file, we often do this sequence:
- prepare a short buffer for the object header (on stack)
- call unpack_sha1_header() and have early part of the object data
inflated, enough to fill the buffer
- parse that data in the short buffer, assuming that the first part
of the object is <typename> SP <length> NUL
Because the parsing function parse_sha1_header_extended() is not
given the number of bytes inflated into the header buffer, it you
craft a file whose early part inflates a garbage sequence without SP
or NUL, and replace a loose object with it, it will end up reading
past the end of the inflated data.
To correct this, do the following four things:
- rename unpack_sha1_header() to unpack_sha1_short_header() and
have unpack_sha1_header_to_strbuf() keep calling that as its
helper function. This will detect and report zlib errors, but is
not aware of the format of a loose object (as before).
- introduce unpack_sha1_header() that calls the same helper
function, and when zlib reports it inflated OK into the buffer,
check if the inflated data has NUL. This would ensure that
parsing function will terminate within the buffer that holds the
inflated header.
- update unpack_sha1_header_to_strbuf() to check if the resulting
buffer has NUL for the same effect.
- update parse_sha1_header_extended() to make sure that its loop to
find the SP that terminates the <typename> stops at NUL.
Essentially, this makes unpack_*() functions that are asked to
unpack a loose object header to be a bit more strict and detect an
input that cannot possibly be a valid object header, even before the
parsing function kicks in.
Reported-by: Gustavo Grieco <gustavo.grieco@imag.fr>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The streaming read interface from a loose object called
parse_sha1_header() but discarded its return value, without noticing
a potential error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark strings for translation in lib/index.tcl that were seemingly
left behind by 700e560 ("git-gui: Mark forgotten strings for
translation.", 2008-09-04) which marks string in do_revert_selection
procedure.
These strings are passed to unstage_help and add_helper procedures.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with v2.5.0 git merge can handle FETCH_HEAD internally and
warns when it's called like 'git merge <message> HEAD <commit>' because
that syntax is deprecated. Use this feature in git-gui and get rid of
that warning.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for converting certain calls of memcpy(3) to
COPY_ARRAY() and apply that transformation to the code base. The result
is
shorter and safer code. For now only consider calls where source and
destination have the same type, or in other words: easy cases.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add COPY_ARRAY, a safe and convenient helper for copying arrays,
complementing ALLOC_ARRAY and REALLOC_ARRAY. Users just specify source,
destination and the number of elements; the size of an element is
inferred automatically.
It checks if the multiplication of size and element count overflows.
The inferred size is passed first to st_mult, which allows the division
there to be done at compilation time.
As a basic type safety check it makes sure the sizes of source and
destination elements are the same. That's evaluated at compilation time
as well.
COPY_ARRAY is safe to use with NULL as source pointer iff 0 elements are
to be copied. That convention is used in some cases for initializing
arrays. Raw memcpy(3) does not support it -- compilers are allowed to
assume that only valid pointers are passed to it and can optimize away
NULL checks after such a call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "highlight" binary can, in some cases, determine the language type
by the means of file contents, for example the shebang in the first line
for some scripting languages. Make use of this autodetection for files
which syntax is not known by gitweb. In that case, pass the blob
contents to "highlight --force"; the parameter is needed to make it
always generate HTML output (which includes HTML-escaping).
Although we now run highlight on files which do not end up highlighted,
performance is virtually unaffected because when we call highlight, it
is used for escaping HTML. In the case that highlight is used, gitweb
calls sanitize() instead of esc_html(), and the latter is significantly
slower (it does more, being roughly a superset of sanitize()). Simple
benchmark comparing performance of 'blob' view of files without syntax
highlighting in gitweb before and after this change indicates ±1%
difference in request time for all file types. Benchmark was performed
on local instance on Debian, using Apache/2.4.23 web server and CGI.
Document the feature and improve syntax highlight documentation, add
test to ensure gitweb doesn't crash when language detection is used.
Signed-off-by: Ian Kelling <ian@iankelling.org>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function needs_work_tree_config() that is called from
create_default_files() is supposed to be fed the path to ".git" that
looks as if it is at the top of the working tree, and decide if that
location matches the actual worktree being used. This comparison allows
"git init" to decide if core.worktree needs to be recorded in the
working tree.
In the current code, however, we feed the return value from
get_git_dir(), which can be totally different from what the function
expects when "gitdir" file is involved. Instead of giving the path to
the ".git" at the top of the working tree, we end up feeding the actual
path that the file points at.
This original location of ".git" however is only known to init_db().
Make init_db() save it and have it passed to create_default_files() as a
new parameter, which passes the correct location down to
needs_work_tree_config() to fix this.
Noticed-by: Max Nordlund <max.nordlund@sqore.com>
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a pure code move, necessary to kill the global variable git_link
later (and also helps a bit in the next patch).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
