We lost rsync support when transitioning from shell to C. Support it
again (even if the transport is technically deprecated, some people just
do not have any chance to use anything else).
Also, add a test to t5510. Since rsync transport is not configured by
default on most machines, and especially not such that you can write to
rsync://127.0.0.1$(pwd)/, it is disabled by default; you can enable it by
setting the environment variable TEST_RSYNC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Whip post 1.5.3.3 maintenance series into shape.
git stash: document apply's --index switch
post-receive-hook: Remove the From field from the generated email header so that the pusher's name is used
Using the name of the committer of the revision at the tip of the
updated ref is not sensible. That information is available in the email
itself should it be wanted, and by supplying a "From", we were
effectively hiding the person who performed the push - which is useful
information in itself.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was a function called remove_empty_dir_recursive() buried
in refs.c. Expose a slightly enhanced version in dir.h: it can now
optionally remove a non-empty directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently alloc_ref() expects the length of the refname plus 1
as its parameter, prepares that much space and returns a "ref"
structure for the caller to fill the refname. One caller in
transport.c::get_refs_from_bundle() however allocated one byte
less.
It may be a good idea to change the calling convention to give
alloc_ref() the length of the refname, but that clean-up can be
done in a separate patch. This patch only fixes the bug and
makes all callers consistent.
There was also one overallocation in connect.c, which would not
hurt but was wasteful. This patch fixes it as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead print a single message around sequences of commands that can
potentially take some time.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, a non-path URL gets lost before the clone.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit with non-zero status when "git remote rm" was told to
remove a non-existing remote.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-remote: exit with non-zero status after detecting errors.
rebase -i: squash should retain the authorship of the _first_ commit
git-add--interactive: Improve behavior on bogus input
git-add--interactive: Allow Ctrl-D to exit
Some subcommands of "git-remote" detected and issued error
messages but did not signal that to the calling process with
exit status.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was determined on the mailing list, that it makes more sense for a
"squash" to keep the author of the first commit as the author for the
result of the squash.
Make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you do many rebases, you can get annoyed by having to type out
the actions "edit" or "squash" in total.
This commit helps that, by allowing you to enter "e" instead of "edit",
"p" instead of "pick", or "s" instead of "squash".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1) Previously, any menu would cause a perl error when entered '0',
which is never a valid option.
2) Entering a bogus choice (like 998 or 4-2) surprisingly caused
the same behavior as if the user had just hit 'enter', which
means to carry out the selected action on the selected items.
Entering such bogus input is now a no-op and the sub-menu
doesn't exit.
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hitting Ctrl-D (EOF) is a common way to exit shell-like tools.
When in a sub-menu it will still behave as if an empty line had
been entered, carrying out the action on the selected items and
returning to the previous menu.
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config item for a refspec side and the ref name that it matches
aren't necessarily character-for-character identical. We actually want
to merge a ref by default if: there is no per-branch config, it is the
found result of looking for the match for the first refspec, and the
first refspec is not a pattern. Beyond that, anything that
get_fetch_map() thinks matches is fine.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* make strbuf_read_file take a size hint (works like strbuf_read)
* use it in a couple of places.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updated post-checkout hook to take a flag specifying whether the checkout is
a branch checkout or a file checkout (from the index).
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to say "Applying <patch subject>", "Wrote <tree
object>", and "Committed <commit object>". Worse yet, with
extra blank lines around them.
Make the output more concise. The object names are not so
useful nor interesting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grab_date() gets an extra parameter - atomname; this extra parameter is
checked to see if it has a ":<format>" extra component in it, and if so
that "<format>" string is passed to parse_date_format() to produce an
enum date_mode value which is then further passed to show_date().
In short it allows the user of git-for-each-ref to do things like this:
$ git-for-each-ref --format='%(taggerdate:default)' refs/tags/v1.5.2
Sun May 20 00:30:42 2007 -0700
$ git-for-each-ref --format='%(taggerdate:relative)' refs/tags/v1.5.2
4 months ago
$ git-for-each-ref --format='%(taggerdate:short)' refs/tags/v1.5.2
2007-05-20
$ git-for-each-ref --format='%(taggerdate:local)' refs/tags/v1.5.2
Sun May 20 08:30:42 2007
$ git-for-each-ref --format='%(taggerdate:iso8601)' refs/tags/v1.5.2
2007-05-20 00:30:42 -0700
$ git-for-each-ref --format='%(taggerdate:rfc2822)' refs/tags/v1.5.2
Sun, 20 May 2007 00:30:42 -0700
The default, when no ":<format>" is specified is ":default", leaving the
existing behaviour unchanged.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of supplying a per-field date format specifier, this
patch makes parse_atom() in builtin-for-each-ref.c allow atoms that have
a valid atom name (as determined by the valid_atom[] table) followed by
a colon, followed by an arbitrary string.
The arbitrary string is where the format for the atom will be specified.
Note, if different formats are specified for the same atom, multiple
entries will be made in the used_atoms table to allow them to be
distinguished by the grab_XXXX() functions.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the code to parse --date=<format> parameter to revision
walkers into a separate function, parse_date_format(). This function
is passed a string and converts it to an enum date_format:
- "relative" => DATE_RELATIVE
- "iso8601" or "iso" => DATE_ISO8601
- "rfc2822" => DATE_RFC2822
- "short" => DATE_SHORT
- "local" => DATE_LOCAL
- "default" => DATE_NORMAL
In the event that none of these strings is found, the function die()s.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sv/svn:
git-svn: handle changed svn command-line syntax
git-svn: fix test for trunk svn (transaction out of date)
git-svn: fix test for trunk svn (commit message not needed)
We used to incorrectly start calculating diffs whenever any argument but
'-z' was recognized by the diff options parsing. That was bogus, since not
all arguments result in diffs being needed, so we just waste a lot of time
and effort on calculating diffs that don't matter.
This actually also fixes another bug in "git log". Try this:
git log -C
and notice how it prints an extra empty line in between log entries, even
though it never prints the actual diff (because we didn't ask for any diff
format, so the diff machinery never prints anything).
With this patch, that bogus empty line is gone, because "revs->diff" is
never set. So this isn't just a "wasted time and effort" issue, it's also
a slight semantic fix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple commands were displayed in one line, making the manpage hard to read.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'mergetool' of git://repo.or.cz/git/mergetool:
mergetool: Fix typo in options passed to kdiff3
mergetool: fix emerge when running in a subdirectory
Mergetool generating blank files (1.5.3)
For that purpose, the ->buf is always initialized with a char * buf living
in the strbuf module. It is made a char * so that we can sloppily accept
things that perform: sb->buf[0] = '\0', and because you can't pass "" as an
initializer for ->buf without making gcc unhappy for very good reasons.
strbuf_init/_detach/_grow have been fixed to trust ->alloc and not ->buf
anymore.
as a consequence strbuf_detach is _mandatory_ to detach a buffer, copying
->buf isn't an option anymore, if ->buf is going to escape from the scope,
and eventually be free'd.
API changes:
* strbuf_setlen now always works, so just make strbuf_reset a convenience
macro.
* strbuf_detatch takes a size_t* optional argument (meaning it can be
NULL) to copy the buffer's len, as it was needed for this refactor to
make the code more readable, and working like the callers.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
path_name is either ptr that should not be freed, or a pointer to a strbuf
buffer that is deallocated when exiting the loop. Don't do that !
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only pass the basename of the output filename when to emerge, since
emerge interprets non-absolute pathnames relative to the containing
directory of the output buffer.
Thanks to Kelvie Wong for pointing this out.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When mergetool is run from a subdirectory, "ls-files -u" nicely
limits the output to conflicted files in that directory, but
we need to give the full path to cat-file plumbing to grab the
contents of stages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes the bug where we were using the wrong font to calculate
the width of the tab stops in the diff display window.
If we're running on Tk 8.5 we also use the new -tabstyle wordprocessor
option that makes tabs work as expected, i.e. a tab moves the cursor
to the right until the next tab stop is reached. On Tk 8.5 we also
get fancy and set the first tab stop at column 1 for a normal diff
or column N for a merge diff with N parents.
On Tk8.4 we can't do that because the tabs work in the "tabular"
style, i.e. the nth tab character moves to the location of the nth
tab position, *unless* you ask for the default tab setting, which
gives 8-column tabs that work in the "wordprocessor" mode. So on
Tk8.4 if the tab setting is 8 we ask for default tabs. This means
that a tab setting of 7 or 9 can look quite different to 8 in some
cases.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When quiltimport encounters a non-existent patch in the series file,
just skip to the next patch. This matches the behavior of quilt.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code incorrectly assumed that strbuf.buf is always an
allocated piece of memory that has NUL at offset strbuf.len.
That assumption does not hold for a freshly initialized empty
strbuf.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
