These may not be obvious to non-native English speakers
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final hunk in this patch corrects what appears to be a typo:
of --> or
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Short story: There is a section in t3400 that tests fundamental rebase
properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09)
added a check that rebase works on a detached HEAD, but the test was put
near the end of the file. This moves it to a more suitable place.
Long story: The test that preceded the one in question tests that a
rebased commit degrades from a content change with mode change to a
mere mode change. But on Windows, where we have core.filemode=false,
the original commit did not record the mode change, and so the rebase
operation did not rebase anything. This caused the subsequent detached
HEAD test to fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue reported by Johannes Sixt on the git mailing list:
> This recipe sends gitk into an endless loop. In git.git do:
>
> cd t
> # remove chmod a+x A near the end of the file
> sed -i 's/chmod/: chmod/' t3400-rebase.sh
> sh t3400-rebase.sh --debug
> cd trash\ directory.t3400-rebase/
> gitk master modechange modechange@{1}
>
>
> I briefly see the history chart, but the dot that should be modechange@{1}
> is missing. One automatically selected commit is shown in the diff section
> below. But then the commit list is cleared and gitk goes into an infinite
> loop.
>
> Things work alright if either modechange@{1} is dropped, or the 'chmod'
> line is left unchanged, which is a bit strange.
>
> This is with git version 1.6.1.2.390.gba743
There were actually two problems. This recipe created a situation where
git log would output a child commit after its parent. This meant that
we called fix_reversal which called splitvarc, which should call modify_arc
to note the fact that it has modified the arc that it has just split. It
wasn't, which meant that displayorder and other variables got into an
inconsistent state (a commit appearing twice in displayorder).
This then meant that the targetrow/targetid logic in drawvisible thought
it need to redraw each time. That, together with the fact that drawvisible
called drawcommits which called drawvisible if a redraw was needed, led
to the infinite loop.
In fact drawvisible is now the only caller of drawcommits. Thus, the
start and end row arguments to drawcommits always encompass the whole
visible area, so drawcommits doesn't need to call drawvisible to redraw;
it just needs to clear the screen and draw what it's been asked to.
This fixes these two problems by adding a call to modify_arc in
splitvarc and by taking out the call to drawvisible in drawcommits.
It also removes an unrelated left-over debugging puts in external_blame.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Call setup_git_directory() before git_config() to make sure git_dir is set
to the proper value.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameters accepted by the --whitespace option of "git apply" have
changed over time, and the documentation for "git rebase" was out of
sync. Remove the specific parameter list from the "git rebase"
documentation and simply point to the "git apply" documentation for
details, as is already done in the "git am" documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When %z was removed from the strftime call and subsituted with a
local gmt offset calculation, time() was no longer the default for
all time functions as it was with the previous localtime(shift).
This is now corrected so that format_svn_time behaves as it used to.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though this will break things for some extremely rare repositories
used by broken Windows clients, it's probably not worth enabling this by
default as it has negatively affected many more users than it has helped
from what we've seen so far.
The extremely rare repositories that have broken symlinks in them will be
silently corrupted in import; but users can still reenable this option and
restart the import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is nothing to be skipped, the output from
rev-list --bisect-vars was eval'ed without first being
strung together with &&; this is probably not a problem
as it is much less likely to be a bad input than the list
handcrafted by the filter_skip function, but it still is
a good discipline.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We also add --format= completion for "git show".
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "bad" commit was also "skip"ped and when more than one
commit was skipped, the "filter_skipped" function would have
printed something like:
bisect_rev=<hash1>|<hash2>
(where <hash1> and <hash2> are hexadecimal sha1 hashes)
and this would have been evaled later as piping "bisect_rev=<hash1>"
into "<hash2>", which would have failed.
So this patch makes the "filter_skipped" function properly quote
what it outputs, so that it will print something like:
bisect_rev='<hash1>|<hash2>'
which will be properly evaled later. The caller was not stopping
properly because the scriptlet this function returned to be evaled
was not strung together with && and because of this, an error in
an earlier part of the output was simply ignored.
A test case is added to the test suite.
And while at it, we also initialize the VARS, FOUND and TRIED
variables, so that we protect ourselves from environment variables
the user may have with these names.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you are in the middle of "git rebase", "git am --abort" by mistake
would have referred to nonexistent ORIG_HEAD and barfed, or worse yet, used
a stale ORIG_HEAD and taken you to an unexpected commit.
Also the option parsing did not reject "git am --abort --skip".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am --abort resets the index unconditionally. But in case a previous
git am exited due to a dirty index it is preferable to keep that index.
Make it so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OS X's GNU grep does not support -P/--perl-regexp.
We use a basic RE instead, and simplify the pattern slightly by
replacing '+' with '*' so it can be more easily expressed using a basic
RE. The important part of pattern, checking for a SHA-1 has suffix in
the successful PUT/MOVE operations, remains the same. Also, a-z instead
of a-f was an obvious mistake in the original RE. Here are samples of
what we want to match:
127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "PUT /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277
127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "MOVE /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The AIX mkstemp() modifies its template parameter to an empty string if
the call fails. The existing code had already recomputed the template,
but too late to be good.
See also 6ff6af62, which fixed this problem in a different spot.
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a repository created with git older than f49fb35 (git-init-db: create
"pack" subdirectory under objects, 2005-06-27), objects/pack/ directory is
not created upon initialization. It was Ok because subdirectories are
created as needed inside directories init-db creates, and back then,
packfiles were recent invention.
After the said commit, new codepaths started relying on the presense of
objects/pack/ directory in the repository. This was exacerbated with
8b4eb6b (Do not perform cross-directory renames when creating packs,
2008-09-22) that moved the location temporary pack files are created from
objects/ directory to objects/pack/ directory, because moving temporary to
the final location was done carefully with lazy leading directory creation.
Many packfile related operations in such an old repository can fail
mysteriously because of this.
This commit introduces two helper functions to make things work better.
- odb_mkstemp() is a specialized version of mkstemp() to refactor the
code and teach it to create leading directories as needed;
- odb_pack_keep() refactors the code to create a ".keep" file while
create leading directories as needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows the HTTP tests to run on OS X 10.5. It is not
sufficient to be able to pass in LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH alone, as the apache.conf also needs a couple
tweaks.
These changes are put into an <IfDefine> to keep them Darwin specific,
but this means lib-httpd.sh needs to be modified to pass -DDarwin to
apache when running on Darwin. As long as we're making this change to
lib-httpd.sh, we may as well set LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH to appropriate default values for the platform.
Note that we now pass HTTPD_PARA to apache at shutdown as well.
Otherwise apache will emit a harmless, but noisy warning that LogFormat
is an unknown directive.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules how the patterns are matched against path names are the same
for .gitattribute and .gitignore files.
This also replace the notion "glob pattern" by "pattern" because
gitignore.txt talks about "glob" only in some contexts where the pattern
is mentioned.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Global static variables don't need to be initialized to 0/NULL.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
README suggested to look at "Documentation/gittutorial.txt" for the
tutorial and to use "man git-commandname" for documentation of each
command.
This was not consistent because the tutorial can also be available with
"man gittutorial" once git is installed, and the documentation for each
command can be available at "Documentation/git-commandname.txt" before
installing git.
This patch tries to make the description more consistent. It also fixes
the path to the cvs-migration documentation that changed from
"Documentation/cvs-migration.txt" to "Documentation/gitcvs-migration.txt".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When run without --author and it fails to determine an author, git
quiltimport tries `read patch_author` to get user input, but standard
input has been redirected to the patch series file. This commit lets
quiltimport read the series file through file descriptor 3 so that the
standard input is preserved.
Reported by Uwe Kleine-König through http://bugs.debian.org/515910
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, for dates older than 12 months we fell back to just giving the
absolute time. This can be a bit jarring when reading a list of times.
Instead, let's switch to "Y years, M months" for five years, and then just
"Y years" after that.
No particular reason on the 5 year cutoff except that it seemed reasonable
to me.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More specifically; --pretty=format, tformat and new %foo shortcut.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two are often used together but are too long to type.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow --pretty="%h %s" (and --format="%h %s") as shorthand for an often
used option --pretty=tformat:"%h %s".
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people prefer to call the pretty-print styles "format", and get
annoyed to see "git log --format=short" fail. Introduce it as a synonym
to --pretty so that both can be used.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'make install' was run with sufficient privileges, then the installed
builtins in gitexecdir, which are either hardlinked, symlinked, or copied,
would receive the user and group of whoever built git. With this commit
the initial hardlink or copy is done from the installation tree and not
the build tree to fix this.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Marius Storm-Olsen <git@storm-olsen.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
