* 'master' of git://bogomips.org/git-svn:
git-svn.perl: fix a false-positive in the "already exists" test
git-svn.perl: perform deletions before anything else
git-svn: Fix time zone in --localtime
git-svn: un-break "git svn rebase" when log.abbrevCommit=true
git-svn: remove redundant porcelain option to rev-list
completion: add --interactive option to git svn dcommit
* jk/diff-highlight:
diff-highlight: document some non-optimal cases
diff-highlight: match multi-line hunks
diff-highlight: refactor to prepare for multi-line hunks
diff-highlight: don't highlight whole lines
diff-highlight: make perl strict and warnings fatal
* fc/zsh-completion:
completion: simplify __gitcomp and __gitcomp_nl implementations
completion: use ls -1 instead of rolling a loop to do that ourselves
completion: work around zsh option propagation bug
see afd7f1e for more details on git svn dcommit --interactive
Signed-off-by: Frederic Heitzmann <frederic.heitzmann@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
If the argument for `__git_ps1` begins with a dash, `printf` tries to
interpret it as an option which results in an error message.
The problem is solved by adding '--' before the argument to tell
`printf` to not interpret the following argument as an option.
Adding '--' directly to the argument does not help because the argument
is enclosed by double quotes.
Signed-off-by: Christian Hammerl <info@christian-hammerl.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff-highlight script works on heuristics, so it can be
wrong. Let's document some of the wrong-ness in case
somebody feels like working on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we only bother highlighting single-line hunks. The
rationale was that the purpose of highlighting is to point
out small changes between two similar lines that are
otherwise hard to see. However, that meant we missed similar
cases where two lines were changed together, like:
-foo(buf);
-bar(buf);
+foo(obj->buf);
+bar(obj->buf);
Each of those changes is simple, and would benefit from
highlighting (the "obj->" parts in this case).
This patch considers whole hunks at a time. For now, we
consider only the case where the hunk has the same number of
removed and added lines, and assume that the lines from each
segment correspond one-to-one. While this is just a
heuristic, in practice it seems to generate sensible
results (especially because we now omit highlighting on
completely-changed lines, so when our heuristic is wrong, we
tend to avoid highlighting at all).
Based on an original idea and implementation by Michał
Kiedrowicz.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code structure assumes that we will only look at
a pair of lines at any given time, and that the end result
should always be to output that pair. However, we want to
eventually handle multi-line hunks, which will involve
collating pairs of removed/added lines. Let's refactor the
code to return highlighted pairs instead of printing them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a change like:
-foo
+bar
we end up highlighting the entirety of both lines (since the
whole thing is changed). But the point of diff highlighting
is to pinpoint the specific change in a pair of lines that
are mostly identical. In this case, the highlighting is just
noise, since there is nothing to pinpoint, and we are better
off doing nothing.
The implementation looks for "interesting" pairs by checking
to see whether they actually have a matching prefix or
suffix that does not simply consist of colorization and
whitespace. However, the implementation makes it easy to
plug in other heuristics, too, like:
1. Depending on the source material, the set of "boring"
characters could be tweaked to include language-specific
stuff (like braces or semicolons for C).
2. Instead of saying "an interesting line has at least one
character of prefix or suffix", we could require that
less than N percent of the line be highlighted.
The simple "ignore whitespace, and highlight if there are
any matched characters" implemented by this patch seems to
give good results on git.git. I'll leave experimentation
with other heuristics to somebody who has a dataset that
does not look good with the current code.
Based on an original idea and implementation by Michał
Kiedrowicz.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These perl features can catch bugs, and we shouldn't be
violating any of the strict rules or creating any warnings,
so let's turn them on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/zsh-completion:
completion: simplify __gitcomp and __gitcomp_nl implementations
completion: use ls -1 instead of rolling a loop to do that ourselves
completion: work around zsh option propagation bug
* jn/svn-fe: (36 commits)
vcs-svn: suppress a -Wtype-limits warning
vcs-svn: allow import of > 4GiB files
vcs-svn: rename check_overflow arguments for clarity
vcs-svn/svndiff.c: squelch false "unused" warning from gcc
vcs-svn: reset first_commit_done in fast_export_init
vcs-svn: do not initialize report_buffer twice
vcs-svn: avoid hangs from corrupt deltas
vcs-svn: guard against overflow when computing preimage length
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: implement text-delta handling
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
...
These shell functions are written in an unnecessarily verbose way;
simplify their "conditionally use $<number> after checking $# against
<number>" logic by using shell's built-in conditional substitution
facilities.
Also remove the first of the two assignments to IFS in __gitcomp_nl
that does not have any effect.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code a great deal. In particular, it allows us to
get rid of __git_shopt, which is used only in this fuction to enable
'nullglob' in zsh.
[jn: squashed with a patch that actually gets rid of __git_shopt]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When listing commands in zsh (git <TAB><TAB>), all of them will show up,
instead of only porcelain ones.
The root cause of this is because zsh versions from 4.3.0 to present
(4.3.15) do not correctly propagate the SH_WORD_SPLIT option into the
subshell in ${foo:=$(bar)} expressions. Because of this bug, the list of
all commands was treated as a single word in __git_list_porcelain_commands
and did not match any of the patterns that would usually cause plumbing to
be excluded.
With problematic versions of zsh, after running
emulate sh
fn () {
var='one two'
for v in $var; do echo $v; done
}
x=$(fn)
: ${y=$(fn)}
printing "$x" results in two lines as expected, but printing "$y" results
in a single line because $var is expanded as a single word when evaluating
fn to compute y.
So avoid the construct, and use an explicit 'test -n "$foo" || foo=$(bar)'
instead.
[jn: clarified commit message, indentation style fix]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* va/git-p4-branch:
t9801: do not overuse test_must_fail
git-p4: Change p4 command invocation
git-p4: Add test case for complex branch import
git-p4: Search for parent commit on branch creation
* ld/git-p4-branches-and-labels:
git-p4: label import fails with multiple labels at the same changelist
git-p4: add test for p4 labels
git-p4: importing labels should cope with missing owner
git-p4: cope with labels with empty descriptions
git-p4: handle p4 branches and labels containing shell chars
* pw/p4-view-updates:
git-p4: add tests demonstrating spec overlay ambiguities
git-p4: adjust test to adhere to stricter useClientSpec
git-p4: clarify comment
git-p4: fix verbose comment typo
git-p4: only a single ... wildcard is supported
This simplifies svn-fe a great deal and fulfills a longstanding wish:
support for dumps with deltas in them, and incremental imports.
The cost is that commandline usage of the svn-fe tool becomes a little
more complicated since it no longer keeps state itself but instead reads
blobs back from fast-import in order to copy them between revisions and
apply deltas to them.
Also removes a couple of custom data structures and replaces them with
strbufs like other parts of Git.
* 'svn-fe' of git://repo.or.cz/git/jrn: (32 commits)
vcs-svn: reset first_commit_done in fast_export_init
vcs-svn: do not initialize report_buffer twice
vcs-svn: avoid hangs from corrupt deltas
vcs-svn: guard against overflow when computing preimage length
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: implement text-delta handling
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
vcs-svn: make buffer_read_binary API more convenient
vcs-svn: learn to maintain a sliding view of a file
Makefile: list one vcs-svn/xdiff object or header per line
vcs-svn: avoid using ls command twice
...
Conflicts:
Makefile
contrib/svn-fe/svn-fe.txt
zsh adds a backslash (foo\ ) for each item in the COMPREPLY array if IFS
doesn't contain spaces. This issue has been reported[1], but there is no
solution yet.
This wasn't a problem due to another bug[2], which was fixed in zsh
version 4.3.12. After this change, 'git checkout ma<tab>' would resolve
to 'git checkout master\ '.
Aditionally, the introduction of __gitcomp_nl in commit a31e626
(completion: optimize refs completion) in git also made the problem
apparent, as Matthieu Moy reported.
The simplest and most generic solution is to hide all the changes we do
to IFS, so that "foo \nbar " is recognized by zsh as "foo bar". This
works on versions of git before and after the introduction of
__gitcomp_nl (a31e626), and versions of zsh before and after 4.3.12.
Once zsh is fixed, we should conditionally disable this workaround to
have the same benefits as bash users.
[1] http://www.zsh.org/mla/workers/2012/msg00053.html
[2] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=commitdiff;h=2e25dfb8fd38dbef0a306282ffab1d343ce3ad8d
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change p4 command invocation to avoid going through the shell. This
allows names with spaces and wildcards to work.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To find out which is its parent the commit of the new branch is compared
sequentially to each blob of the parent branch from the newest to the
oldest. The first blob which results in a zero diff is considered the
parent commit. If none is found, then the commit is applied to the top
of the parent branch.
A fast-import "checkpoint" call is required because diff-tree is only
able to work with blobs on disk. But most of these commits will not be
part of the final imported tree, making fast-import fail. To avoid this,
the temporary branches are tracked and then removed at the end of the
import process.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In p4, the Owner field is optional. If it is missing,
construct something sensible rather than crashing.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use an explicit length for the data in a label, rather
than EOT, so that labels with empty descriptions are
passed through correctly.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't use shell expansion when detecting branches, as it will
fail if the branch name contains a shell metachar. Similarly
for labels.
Add additional test for branches with shell metachars.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Catch the case where a ... exists at the end, and also elsehwere.
Reported-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old code was not very complete or robust. Redo it.
This new code should be useful for a few possible additions
in the future:
- support for * and %%n wildcards
- allowing ... inside paths
- representing branch specs (not just client specs)
- tracking changes to views
Mark the remaining 12 tests in t9809 as fixed.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce client views can map individual files,
mapping one //depot file path to one //client file path.
These mappings contain no meta/masking characters.
This patch add support for these file maps to
the currently supported '...' view mappings.
[pw: one test now suceeds]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct view sorting to support the Perforce order,
where client views are ordered and later views
override earlier view mappings.
[pw: one test now succeeds]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change re method in test for unsupported Client View types
(containing %% or *) anywhere in the string rather than
at the begining.
[pw: two tests now succeed]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pw/p4-docs-and-tests:
git-p4: document and test submit options
git-p4: test and document --use-client-spec
git-p4: test --keep-path
git-p4: test --max-changes
git-p4: document and test --import-local
git-p4: honor --changesfile option and test
git-p4: document and test clone --branch
git-p4: test cloning with two dirs, clarify doc
git-p4: clone does not use --git-dir
git-p4: introduce asciidoc documentation
rename git-p4 tests
Clarify there is a -M option, but no -C. These are both
configurable through variables.
Explain that the allowSubmit variable takes a comma-separated
list of branch names.
Catch earlier an invalid branch name given as an argument to
"git p4 clone".
Test option --origin, variable allowSubmit, and explicit master
branch name.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The depot path is required, even with this option. Make sure
git-p4 fails and exits with non-zero.
Contents in the specified depot path will be rearranged according
to the client spec. Test this and add a note in the docs.
Leave an XXX suggesting that this is somewhat confusing behavior
that might be good to fix later.
Function stripRepoPath() looks at self.useClientSpec. Make sure
this is set both for command-line option --use-client-spec and
for configuration variable git-p4.useClientSpec. Test this.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an explicit list of changes is given, it makes no sense to
use @all or @3,5 or any of the other p4 revision specifiers.
Make the code notice when this happens, instead of just ignoring
--changesfile. Test it.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complain if --git-dir is given during a clone. It has no
effect. Only --destination and --bare can change where the newly
cloned git dir will be.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add proper documentation for git-p4. Delete the old .txt
documentation from contrib/fast-import.
Cc: Frans Klaver <fransklaver@gmail.com>
Cc: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/git-prompt:
contrib: add credential helper for OS X Keychain
Makefile: OS X has /dev/tty
Makefile: linux has /dev/tty
credential: use git_prompt instead of git_getpass
prompt: use git_terminal_prompt
add generic terminal prompt function
refactor git_getpass into generic prompt function
move git_getpass to its own source file
imap-send: don't check return value of git_getpass
imap-send: avoid buffer overflow
Conflicts:
Makefile
We use the 'read' command without -r, so that it treats '\' as an
escape character, in several places. This breaks the loop reading
refnames from git-for-each-ref in __git_refs() if there are refnames
such as "foo'bar", in which case for-each-ref helpfully quotes them as
$ git update-ref "refs/remotes/test/foo'bar" HEAD
$ git for-each-ref --shell --format="ref=%(refname:short)" "refs/remotes"
ref='test/foo'\''bar'
Interpolating the \' here will read "ref='test/foo'''bar'" instead, and
eval then chokes on the unbalanced quotes.
However, since none of the read loops _want_ to have backslashes
interpolated, it's much safer to use read -r everywhere.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7c766e5 (git-p4: introduce skipSubmitEdit, 2011-12-04)
made it easier to automate submission to p4, but broke the most
common case.
Add a test for when the user really does edit and save the change
template, and fix the bug that causes the test to fail.
Also add a confirmation message when submission is cancelled.
Reported-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this installed in your $PATH, you can store
git-over-http passwords in your keychain by doing:
git config credential.helper osxkeychain
The code is based in large part on the work of Jay Soffian,
who wrote the helper originally for the initial, unpublished
version of the credential helper protocol.
This version will pass t0303 if you do:
GIT_TEST_CREDENTIAL_HELPER=osxkeychain \
GIT_TEST_CREDENTIAL_HELPER_SETUP="export HOME=$HOME" \
./t0303-credential-external.sh
The "HOME" setup is unfortunately necessary. The test
scripts set HOME to the trash directory, but this causes the
keychain API to complain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
P4 only looks at the environment variable $PWD to figure out
where it is, so chdir() has code to set that every time. But
when the clone --destination is not an absolute path, PWD will
not be absolute and P4 won't be able to find any files expected
to be in the current directory. Fix this by expanding PWD to
an absolute path.
One place this crops up is when using a P4CONFIG environment
variable to specify P4 parameters, such as P4USER or P4PORT.
Setting P4CONFIG=.p4config works for p4 invocations from the
current directory. But if the value of PWD is not absolute, it
fails.
[ update description --pw ]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Submitting patches back to p4 requires a p4 "client". This
is a mapping from server depot paths into a local directory.
The directory need not exist or be populated with files; only
the mapping on the server is required. When there is no
directory, make git-p4 automatically create it.
[ reword description --pw ]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sg/complete-refs:
completion: remove broken dead code from __git_heads() and __git_tags()
completion: fast initial completion for config 'remote.*.fetch' value
completion: improve ls-remote output filtering in __git_refs_remotes()
completion: query only refs/heads/ in __git_refs_remotes()
completion: support full refs from remote repositories
completion: improve ls-remote output filtering in __git_refs()
completion: make refs completion consistent for local and remote repos
completion: optimize refs completion
completion: document __gitcomp()
Conflicts:
contrib/completion/git-completion.bash
Add a configuration variable to skip invoking the editor in the
submit path.
The existing variable skipSubmitEditCheck continues to make sure
that the submit template was indeed modified by the editor; but,
it is not considered if skipSubmitEdit is true.
Reported-by: Loren A. Linden Levy <lindenle@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e5b8eebc (completion: fix issue with process substitution not
working on Git for Windows, 2011-10-26) introduced a new variable in
__git_ps1_show_upstream(), but didn't declare it as local to prevent it
from leaking into the environment.
We may want to rewrite it like the following, but that can wait until the
next cycle.
while read key value
do
...
done <<-EOF
$(git config -z --get-regexp ...)
EOF
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revert 97a21ca (git-p4: stop ignoring apple filetype, 2011-10-16)
and add a test case.
Reported-by: Michael Wookey <michaelwookey@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows comes with a bash that doesn't support process substitution.
It issues the following error when using git-completion.bash with
GIT_PS1_SHOWUPSTREAM set:
$ export GIT_PS1_SHOWUPSTREAM=1
sh.exe": cannot make pipe for process substitution: Function not implemented
sh.exe": cannot make pipe for process substitution: Function not implemented
sh.exe": <(git config -z --get-regexp '^(svn-remote\..*\.url|bash\.showupstream)$' 2>/dev/null | tr '\0\n' '\n '): ambiguous redirect
Replace the process substitution with a 'here string'.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_heads() was introduced in 5de40f5 (Teach bash about
git-repo-config., 2006-11-27), and __git_tags() in 88e21dc (Teach bash
about completing arguments for git-tag, 2007-08-31). As their name
suggests, __git_heads() is supposed to list only branches, and
__git_tags() only tags.
Since their introduction both of these functions consist of two
distinct parts. The first part gets branches or tags, respectively,
from a local repositoty using 'git for-each-ref'. The second part
queries a remote repository given as argument using 'git ls-remote'.
These remote-querying parts are broken in both functions since their
introduction, because they list both branches and tags from the remote
repository. (The 'git ls-remote' query is not limited to list only
heads or tags, respectively, and the for loop filtering the query
results prints everything except dereferenced tags.) This breakage
could be easily fixed by passing the '--heads' or '--tags' options or
appropriate refs patterns to the 'git ls-remote' invocations.
However, that no one noticed this breakage yet is probably not a
coincidence: neither of these two functions were used to query a
remote repository, the remote-querying parts were dead code already
upon thier introduction and remained dead ever since.
Since those parts of code are broken, are and were never used, stop
the bit-rotting and remove them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refspecs for branches in a remote repository start with 'refs/heads/',
so completing those refspecs with 'git config remote.origin.fetch
<TAB>' always offers 'refs/heads/' first, because that's the unique
part of the possible refspecs. But it does so only after querying the
remote with 'git ls-remote', which can take a while when the request
goes through some slower network to a remote server.
Don't waste the user's time and offer 'refs/heads/' right away for
'git config remote.origin.fetch <TAB>'.
The reason for putting 'refs/heads/' directly into COMPREPLY instead
of using __gitcomp() is to avoid __gitcomp() adding a trailing space.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This follows suit of a previous patch for __git_refs(): use a
while-read loop and let bash's word splitting get rid of object names
from 'git ls-remote's output.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_refs_remotes() is used to provide completion for refspecs to set
'remote.*.fetch' config variables for branches on the given remote.
So it's really only interested in refs under 'refs/heads/', but it
queries the remote for all its refs and then filters out all refs
outside of 'refs/heads/'.
Let 'git ls-remote' do the filtering.
Also remove the unused $cmd variable from __git_refs_remotes().
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the __git_refs() completion helper function lists refs from a
local repository, it usually lists the refs' short name, except when
it needs to provide completion for words starting with refs, because
in that case it lists full ref names, see 608efb87 (bash: complete
full refs, 2008-11-28).
Add the same functionality to the code path dealing with remote
repositories, too.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote-handling part of __git_refs() has a nice for loop and state
machine case statement to iterate over all words from the output of
'git ls-remote' to identify object names and ref names. Since each
line in the output of 'git ls-remote' consists of an object name and a
ref name, we can do more effective filtering by using a while-read
loop and letting bash's word splitting take care of object names.
This way the code is easier to understand and the loop will need only
half the number of iterations than before.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a local repository the __git_refs() completion helper function
lists refs under 'refs/(tags|heads|remotes)/', plus some special refs
like HEAD and ORIG_HEAD. For a remote repository, however, it lists
all refs.
Fix this inconsistency by specifying refs filter patterns for 'git
ls-remote' to only list refs under 'refs/(tags|heads|remotes)/'.
For now this makes it impossible to complete refs outside of
'refs/(tags|heads|remotes)/' in a remote repository, but a followup
patch will resurrect that.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a unique command or option is completed, in most cases it is a
good thing to add a trailing a space, but sometimes it doesn't make
sense, e.g. when the completed word is an option taking an argument
('--option=') or a configuration section ('core.'). Therefore the
completion script uses the '-o nospace' option to prevent bash from
automatically appending a space to unique completions, and it has the
__gitcomp() function to add that trailing space only when necessary.
See 72e5e989 (bash: Add space after unique command name is completed.,
2007-02-04), 78d4d6a2 (bash: Support unique completion on git-config.,
2007-02-04), and b3391775 (bash: Support unique completion when
possible., 2007-02-04).
__gitcomp() therefore iterates over all possible completion words it
got as argument, and checks each word whether a trailing space is
necessary or not. This is ok for commands, options, etc., i.e. when
the number of words is relatively small, but can be noticeably slow
for large number of refs. However, while options might or might not
need that trailing space, refs are always handled uniformly and always
get that trailing space (or a trailing '.' for 'git config
branch.<head>.'). Since refs listed by __git_refs() & co. are
separated by newline, this allows us some optimizations with
'compgen'.
So, add a specialized variant of __gitcomp() that only deals with
possible completion words separated by a newline and uniformly appends
the trailing space to all words using 'compgen -S " "' (or any other
suffix, if specified), so no iteration over all words is needed. But
we need to fiddle with IFS, because the default IFS containing a space
would cause the added space suffix to be stripped off when compgen's
output is stored in the COMPREPLY array. Therefore we use only
newline as IFS, hence the requirement for the newline-separated
possible completion words.
Convert all callsites of __gitcomp() where it's called with refs, i.e.
when it gets the output of either __git_refs(), __git_heads(),
__git_tags(), __git_refs2(), __git_refs_remotes(), or the odd 'git
for-each-ref' somewhere in _git_config(). Also convert callsites
where it gets other uniformly handled newline separated word lists,
i.e. either remotes from __git_remotes(), names of set configuration
variables from __git_config_get_set_variables(), stashes, or commands.
Here are some timing results for dealing with 10000 refs.
Before:
$ refs="$(__git_refs ~/tmp/git/repo-with-10k-refs/)"
$ time __gitcomp "$refs"
real 0m1.134s
user 0m1.060s
sys 0m0.130s
After:
$ time __gitcomp_nl "$refs"
real 0m0.373s
user 0m0.360s
sys 0m0.020s
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I always forget which argument is which, and got tired of figuring it
out over and over again.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common thing to grep for is the name of a symbol. This
patch teaches the completion for "git grep" to look in
a 'tags' file, if present, to complete a pattern. For
example, in git.git:
$ make tags
$ git grep get_sha1<Tab><Tab>
get_sha1 get_sha1_oneline
get_sha1_1 get_sha1_with_context
get_sha1_basic get_sha1_with_context_1
get_sha1_hex get_sha1_with_mode
get_sha1_hex_segment get_sha1_with_mode_1
get_sha1_mb
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a small script for helping your editor jump to
specific points of interest. See the README for details.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On the MediaWiki side, the author information is just the MediaWiki login
of the contributor. The import turns it into login@$wiki_name to create
the author's email address on the wiki side. But we don't want this to
include the HTTP password if it's present in the URL ...
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a simple and stupid script for highlighting
differing parts of lines in a unified diff. See the README
for a discussion of the limitations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently "apple" filetype is ignored explicitly, and the file is
not even included in the git repository. This seems wrong.
Remove this, letting it be treated like a "binary" filetype.
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 used to simply pass strings into system() and popen(), and
relied on the shell doing the necessary expansion. This though meant
that shell metacharacters in file names would be corrupted - for
example files with $ or space in them.
Switch to using subprocess.Popen() and friends, and pass in explicit
arrays in the places where it matters. This then avoids needing shell
expansion.
Add trivial helper functions for some common perforce operations. Add
test case.
[pw: test cleanup]
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code was approximate in the filetypes it recognized.
Put in the canonical list and be more careful about matching
elements of the file type.
This might change behavior in some cases, hopefully for the
better. Windows newline mangling will now happen on all
text files. Previously some like "text+ko" were oddly exempt.
Files with multiple combinations of modifiers, like "text+klx",
are now recognized for keyword expansion. I expect these to be
seen only rarely.
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Join the text before looking for keywords. There is nothing to
prevent the p4 output marshaller from splitting in the middle of a
keyword, although it has never been known to happen.
Also remove the (?i) regexp modifier; perforce keywords are
documented as case-sensitive.
Remove the "\n" end-character match. I don't know why that is
in there, and every keyword in a fairly large production p4 repository
always ends with a $.
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the filetypes that p4 supports is utf16. Its behavior is
odd in this case. The data delivered through "p4 -G print" is
not encoded in utf16, although "p4 print -o" will produce the
proper utf16-encoded file.
When dealing with this filetype, discard the data from -G, and
instead read the contents directly.
An alternate approach would be to try to encode the data in
python. That worked for true utf16 files, but for other files
marked as utf16, p4 delivers mangled text in no recognizable encoding.
Add a test case to check utf16 handling, and +k and +ko handling.
Reported-by: Chris Li <git@chrisli.org>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/mediawiki-as-a-remote:
git-remote-mediawiki: allow a domain to be set for authentication
git-remote-mediawiki: obey advice.pushNonFastForward
git-remote-mediawiki: set 'basetimestamp' to let the wiki handle conflicts
git-remote-mediawiki: trivial fixes
git-remote-mediawiki: allow push to set MediaWiki metadata
Add a remote helper to interact with mediawiki (fetch & push)
When the wiki uses e.g. LDAP for authentication, the web interface shows
a popup to allow the user to chose an authentication domain, and we need
to use lgdomain in the API at login time.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a check that no new revisions are on the wiki at the
beginning of the push, but this didn't handle concurrent accesses to the
wiki.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a whitespace issue (no space before :) and remove unused %status in
mw_push.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Placing the contrib hooks into /usr/share/doc/ wasn't a good idea in the
first place. According to the Debian policy they should be located in
/usr/share/git-core/, so let's put them there.
Thanks to Bill Allombert for reporting this through
http://bugs.debian.org/640949
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push can not set the commit note "mediawiki_revision:" and update the
remote reference. This avoids having to "git pull --rebase" after each
push, and is probably more natural. Make it the default, but let it be
configurable with mediawiki.dumbPush or remote.<remotename>.dumbPush.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement a gate between git and mediawiki, allowing git users to push
and pull objects from mediawiki just as one would do with a classic git
repository thanks to remote-helpers.
The following packages need to be installed (available on common
repositories):
libmediawiki-api-perl
libdatetime-format-iso8601-perl
Use remote helpers in order to be as transparent as possible to the git
user.
Download Mediawiki revisions through the Mediawiki API and then
fast-import into git.
Mediawiki revision number and git commits are linked thanks to notes
bound to commits.
The import part is done on a refs/mediawiki/<remote> branch before
coming to refs/remote/origin/master (Huge thanks to Jonathan Nieder
for his help)
We use UTF-8 everywhere: use encoding 'utf8'; does most of the job, but
we also read the output of Git commands in UTF-8 with the small helper
run_git, and write to the console (STDERR) in UTF-8. This allows a
seamless use of non-ascii characters in page titles, but hasn't been
tested on non-UTF-8 systems. In particular, UTF-8 encoding for filenames
could raise problems if different file systems handle UTF-8 filenames
differently. A uri_escape of mediawiki filenames could be imaginable, and
is still to be discussed further.
Partial cloning is supported using one of:
git clone -c remote.origin.pages='A_Page Another_Page' mediawiki::http://wikiurl
git clone -c remote.origin.categories='Some_Category' mediawiki::http://wikiurl
git clone -c remote.origin.shallow='True' mediawiki::http://wikiurl
Thanks to notes metadata, it is possible to compare remote and local last
mediawiki revision to warn non-fast forward pushes and "everything
up-to-date" case.
When allowed, push looks for each commit between remotes/origin/master
and HEAD, catches every blob related to these commit and push them in
chronological order. To do so, it uses git rev-list --children HEAD and
travels the tree from remotes/origin/master to HEAD through children. In
other words:
* Shortest path from remotes/origin/master to HEAD
* For each commit encountered, push blobs related to this commit
Signed-off-by: Jérémie Nikaes <jeremie.nikaes@ensimag.imag.fr>
Signed-off-by: Arnaud Lacurie <arnaud.lacurie@ensimag.imag.fr>
Signed-off-by: Claire Fousse <claire.fousse@ensimag.imag.fr>
Signed-off-by: David Amouyal <david.amouyal@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Sylvain Boulmé <sylvain.boulme@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* va/p4-branch-import:
git-p4: Add simple test case for branch import
git-p4: Allow branch definition with git config
git-p4: Allow filtering Perforce branches by user
git-p4: Correct branch base depot path detection
git-p4: Process detectCopiesHarder with --bool
git-p4: Add test case for copy detection
git-p4: Add test case for rename detection
git-p4: Add description of rename/copy detection options
git-p4: Allow setting rename/copy detection threshold
Perforce does not strictly require the usage of branch specifications to create
branches. In these cases the branch detection code of git-p4 will not be able to
import them.
This patch adds support for git-p4.branchList configuration option, allowing
branches to be defined in git config.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All branches in the Perforce server are downloaded to allow branch detection. If
you have a centralized server on a remote location and there is a big number of
branches this operation can take some time.
This patch adds the configuration option git-p4.branchUser to allow filtering
the branch list by user. Although this limits the branch maintenance in Perforce
to be done by a single user, it might be an advantage when the number of
branches being used in a specific depot is very small when compared with the
branches available in the server.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When branch detection is enabled each branch is named in git after their
relative depot path in Perforce. To do this the depot paths are compared against
each other to find their common base path. The current algorithm makes this
comparison on a character by character basis.
Assuming we have the following branches:
//depot/branches/featureA
//depot/branches/featureB
Then the base depot path would be //depot/branches/feature, which is an invalid
depot path.
The current patch fixes this by splitting the path into a list and comparing the
list entries, making it choose correctly //depot/branches as the base path.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy and rename detection arguments (-C and -M) allow setting a threshold value
for the similarity ratio. If the similarity is below this threshold the rename
or copy is ignored and the file is added as new.
This patch allows setting git-p4.detectRenames and git-p4.detectCopies options
to an integer value to set the respective threshold.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easy to customize the git diff-tree options, for example
to include -p to include inline diffs.
It defaults to the current options "--stat --summary --find-copies-harder"
and thus is backward-compatible.
Signed-off-by: Jon Jensen <jon@endpoint.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When importing a repo, the time on the initial commit had been
just "now". But this causes problems when trying to share among
git-p4 repos that were created identically, although at different
times. Instead, use the time in the top-most p4 change as the
time for the git import commit.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the namespace mechanism in a new gitnamespaces(7) page.
Reference it from receive-pack and upload-pack.
Document the new --namespace option and GIT_NAMESPACE environment
variable in git(1), and reference gitnamespaces(7).
Add a sample Apache configuration to http-backend(1) to support
namespaced repositories, and reference gitnamespaces(7).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for dividing the refs of a single repository into multiple
namespaces, each of which can have its own branches, tags, and HEAD.
Git can expose each namespace as an independent repository to pull from
and push to, while sharing the object store, and exposing all the refs
to operations such as git-gc.
Storing multiple repositories as namespaces of a single repository
avoids storing duplicate copies of the same objects, such as when
storing multiple branches of the same source. The alternates mechanism
provides similar support for avoiding duplicates, but alternates do not
prevent duplication between new objects added to the repositories
without ongoing maintenance, while namespaces do.
To specify a namespace, set the GIT_NAMESPACE environment variable to
the namespace. For each ref namespace, git stores the corresponding
refs in a directory under refs/namespaces/. For example,
GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can
also specify namespaces via the --namespace option to git.
Note that namespaces which include a / will expand to a hierarchy of
namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under
refs/namespaces/foo/refs/namespaces/bar/. This makes paths in
GIT_NAMESPACE behave hierarchically, so that cloning with
GIT_NAMESPACE=foo/bar produces the same result as cloning with
GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It
also avoids ambiguity with strange namespace paths such as
foo/refs/heads/, which could otherwise generate directory/file conflicts
within the refs directory.
Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE
environment variable and --namespace option, and support iterating over
refs in a namespace.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.abbrevguard config variable had removed and
now core.abbrev has been used instead. Teach it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
Handle input in Subversion's dumpfile format, version 3. This is the
format produced by "svnrdump dump" and "svnadmin dump --deltas", and
the main difference between v3 dumpfiles and the dumpfiles already
handled is that these can include nodes whose properties and text are
expressed relative to some other node.
To handle such nodes, we find which node the text and properties are
based on, handle its property changes, use the cat-blob command to
request the basis blob from the fast-import backend, use the
svndiff0_apply() helper to apply the text delta on the fly, writing
output to a temporary file, and then measure that postimage file's
length and write its content to the fast-import stream.
The temporary postimage file is shared between delta-using nodes to
avoid some file system overhead.
The svn-fe interface needs to be more complicated to accomodate the
backward flow of information from the fast-import backend to svn-fe.
The backflow fd is not needed when parsing streams without deltas,
though, so existing scripts using svn-fe on v2 dumps should
continue to work.
NEEDSWORK: generalize interface so caller sets the backflow fd, close
temporary file before exiting
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This teaches svn-fe to incrementally import into an existing
repository (at last!) at the expense of less convenient UI. Think of
it as growing pains. This opens the door to many excellent things,
and it would be a bad idea to discourage people from building on it
for much longer.
* db/vcs-svn-incremental:
vcs-svn: avoid using ls command twice
vcs-svn: use mark from previous import for parent commit
vcs-svn: handle filenames with dq correctly
vcs-svn: quote paths correctly for ls command
vcs-svn: eliminate repo_tree structure
vcs-svn: add a comment before each commit
vcs-svn: save marks for imported commits
vcs-svn: use higher mark numbers for blobs
vcs-svn: set up channel to read fast-import cat-blob response
Conflicts:
t/t9010-svn-fe.sh
vcs-svn/fast_export.c
vcs-svn/fast_export.h
vcs-svn/repo_tree.c
vcs-svn/svndump.c
* ld/p4-preserve-user-names:
git-p4: warn if git authorship won't be retained
git-p4: small improvements to user-preservation
git-p4: add option to preserve user names
* sg/completion-updates:
Revert "completion: don't declare 'local words' to make zsh happy"
git-completion: fix regression in zsh support
completion: move private shopt shim for zsh to __git_ namespace
completion: don't declare 'local words' to make zsh happy
If the git commits you are submitting contain changes made by
other people, the authorship will not be retained. Change git-p4
to warn of this and to note that --preserve-user can be used
to solve the problem (if you have suitable permissions).
The warning can be disabled.
Add a test case and update documentation.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The zsh support of git-completion script in contrib/ is broken for current
versions of zsh, and does not notice when there's a subcommand.
For example: "git log origi<TAB>" gives no completions because it would
try to find a "git origi..." command. This will be fixed by zsh 4.3.12,
but for now we can workaround it by backporting the same fix as zsh folks
implemented.
The problem started after commit v1.7.4-rc0~11^2~2 (bash: get
--pretty=m<tab> completion to work with bash v4), which introduced
_get_comp_words_by_ref() that comes from bash-completion[1] scripts, and
relies on the 'words' variable.
However, it turns out 'words' is a special variable used by zsh
completion. From zshcompwid(1):
[...] the parameters are reset on each function exit (including nested
function calls from within the completion widget) to the values they had
when the function was entered.
As a result, subcommand words are lost. Ouch.
This is now fixed in the latest master branch of zsh[2] by simply defining
'words' as hidden (typeset -h), which removes the special meaning inside
the emulated bash function. So let's do the same.
Jonathan Nieder helped on the commit message.
[1] http://bash-completion.alioth.debian.org/
[2] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=commitdiff;h=e880604f029088f32fb1ecc39213d720ae526aaa
Reported-by: Stefan Haller <lists@haller-berlin.de>
Comments-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
. Slightly more paranoid checking of results from 'p4 change'
. Remove superfluous "-G"
. Don't modify the username if it is unchanged.
. Add a comment in the change template to show what is
going to be done.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-By: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most zsh users probably probably do not expect a custom shopt function
to enter their environment just because they ran "source
~/.git-completion.sh".
Such namespace pollution makes development of other scripts confusing
(because it makes the bash-specific shopt utility seem to be available
in zsh) and makes git's tab completion script brittle (since any other
shell snippet implementing some other subset of shopt will break it).
Rename the shopt shim to the more innocuous __git_shopt to be a good
citizen (with two underscores to avoid confusion with completion rules
for a hypothetical "git shopt" command).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-n" option of "git grep" gained a synonym "--line-number" with
commit 7d6cb10b ("grep: Add the option '--line-number'", 2011-03-28).
Teach bash-completion about it.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "_get_comp_words_by_ref -n := words" command from the
bash_completion library reassembles a modified version of COMP_WORDS
with ':' and '=' no longer treated as word separators and stores it in
the ${words[@]} array. Git's programmable tab completion script uses
this to abstract away the difference between bash v3's and bash v4's
definitions of COMP_WORDS (bash v3 used shell words, while bash v4
breaks at separator characters); see v1.7.4-rc0~11^2~2 (bash: get
--pretty=m<tab> completion to work with bash v4, 2010-12-02).
zsh has (or rather its completion functions have) another idea about
what ${words[@]} should contain: the array is prepopulated with the
words from the command it is completing. For reasons that are not
well understood, when git-completion.bash reserves its own "words"
variable with "local words", the variable becomes empty and cannot be
changed from then on. So the completion script neglects the arguments
it has seen, and words complete like git subcommand names. For
example, typing "git log origi<TAB>" gives no completions because
there are no "git origi..." commands.
However, when this words variable is not declared as local but is just
populated by _get_comp_words_by_ref() and then read in various
completion functions, then zsh seems to be happy about it and our
completion script works as expected.
So, to get our completion script working again under zsh and to
prevent the words variable from leaking into the shell environment
under bash, we will only declare words as local when using bash.
Reported-by: Stefan Haller <lists@haller-berlin.de>
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Explained-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In v1.7.4-rc0~11^2~2 (bash: get --pretty=m<tab> completion to work
with bash v4, 2010-12-02) we started to use _get_comp_words_by_ref()
to access completion-related variables. That was large change, and to
make it easily reviewable, we invoked _get_comp_words_by_ref() in each
completion function and systematically replaced every occurance of
bash's completion-related variables ($COMP_WORDS and $COMP_CWORD) with
variables set by _get_comp_words_by_ref().
This has the downside that _get_comp_words_by_ref() is invoked several
times during a single completion. The worst offender is perhaps 'git
log mas<TAB>': during the completion of 'master'
_get_comp_words_by_ref() is invoked no less than six times.
However, the variables $prev, $cword, and $words provided by
_get_comp_words_by_ref() are not modified in any of the completion
functions, and the previous commit ensures that the $cur variable is
not modified as well. This makes it possible to invoke
_get_comp_words_by_ref() to get those variables only once in our
toplevel completion functions _git() and _gitk(), and all other
completion functions will inherit them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.4-rc0~11^2~2 (bash: get --pretty=m<tab> completion to work
with bash v4, 2010-12-02) we use _get_comp_words_by_ref() to access
completion-related variables, and the $cur variable holds the word
containing the current cursor position in all completion functions.
This $cur variable is left unchanged in most completion functions;
there are only four functions modifying its value, namely __gitcomp(),
__git_complete_revlist_file(), __git_complete_remote_or_refspec(), and
_git_config().
If this variable were never modified, then it would allow us a nice
optimisation and cleanup. Therefore, this patch assigns $cur to an
other local variable and uses that for later modifications in those
four functions.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If bashcompinit has not already been autoloaded, do so
automatically, as it is required to properly parse the
git-completion file with ZSH.
Helped-by: Felipe Contreras
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patches from git passed into p4 end up with the committer being identified
as the person who ran git-p4.
With "submit --preserve-user", git-p4 modifies the p4 changelist (after it
has been submitted), setting the p4 author field.
The submitter is required to have sufficient p4 permissions or git-p4
refuses to proceed. If the git author is not known to p4, the submit will
be abandoned unless git-p4.allowMissingP4Users is true.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that the majority of git-p4 uses spaces, not tabs, for indentation.
Consistent indentation is a good hygiene for Python scripts, and mixing
tabs and spaces in Python can lead to hard-to-find bugs.
Signed-off-by: Andrew Garber <andrew@andrewgarber.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If font-lock is disabled, font-lock-compile-keywords complains.
Really what we want to do is to replace log-edit's font-lock
definitions with our own, so define a major mode deriving from
log-edit and set up font-lock-defaults there. We then use the
optional MODE argument to log-edit to set up the major mode of the
commit buffer appropriately.
Signed-off-by: Lawrence Mitchell <wence@gmx.li>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
contrib/thunderbird-patch-inline: do not require bash to run the script
t8001: check the exit status of the command being tested
strbuf.h: remove a tad stale docs-in-comment and reference api-doc instead
Typos: t/README
Documentation/config.txt: make truth value of numbers more explicit
git-pack-objects.txt: fix grammatical errors
parse-remote: replace unnecessary sed invocation
The script does not have to be run under bash, but any POSIX compliant
shell would do, as it does not use any bash-isms.
It may be written under a different style than what is recommended in
Documentation/CodingGuidelines, but that is a different matter.
While at it, fix obvious typos in the comment.
Signed-off-by: Maxin B. John <maxin@maxinbjohn.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
This also adds test for "--merges" and "--no-merges" which we did not
have so far.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tl/p4:
git-p4: Fix error message crash in P4Sync.commit.
Teach git-p4 to ignore case in perforce filenames if configured.
git-p4: Teach gitConfig method about arguments.
Enable bash completion for "git help <alias>", analogous to "git
<alias>", which was already implemented.
Signed-off-by: Jakob Pfender <jpfender@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e32e00d (git-p4: better message for "git-p4 sync" when not
cloned, 2011-02-19) broke another use case, that of using
"git-p4 sync" to import a new branch into an existing repository.
Refine the fix again, on top of the fix in ac34efc.
Reported-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Tested-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is an error message that crashes the script because of an invalid ref
to the non-existing "path" variable. It is almost never printed, which
would explain why nobody encountered this problem before... But anyway,
this oneliner fixes it.
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When files are added to perforce, the path to that file has whichever case
configuration that exists on the machine of the user who added the file.
What does that mean? It means that when Alice adds a file
//depot/DirA/FileA.txt
... and Bob adds:
//depot/dirA/FileB.txt
... we may or may not get a problem. If a user sets the config variable
git-p4.ignorecase to "true", we will consider //depot/DirA and //depot/dirA
to be the same directory.
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, it is possible to call the gitConfig method with an optional
argument string, which will be passed to the "git config" executable. For
instance:
gitConfig("core.ignorecase", "--bool")
will ensure that you get the value "true", and won't have to check the returned
value for [1, true, on, yes].
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e32e00d (git-p4: better message for "git-p4 sync" when not cloned,
2011-02-19) broke the use of the "@all" revision specifier, e.g.,
git-p4 clone //depot/xxx@all
Fix it as per Tor Arvid's quick patch.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Reported-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Based-on-patch-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While doing a final sanity check before merging a topic Bsomething, it
is a good idea to review what damage Bsomething branch would make, by
running:
$ git diff ...Bsomething
Unfortunately, our completion script for 'git diff' doesn't offer
anything after '...'. This is because 'git diff's completion function
invokes __git_complete_file() for non-option arguments to complete the
'<tree>:<path>' extended SHA-1 notation, but this helper function
doesn't support refs after '...' or '..'. Completion of refs after
'...' or '..' is supported by the __git_complete_revlist() helper
function, but that doesn't support '<tree>:<path>'.
To support both '...<ref>' and '<tree>:<path>' notations for 'git
diff', this patch, instead of adding yet another helper function,
joins __git_complete_file() and __git_complete_revlist() into the new
common function __git_complete_revlist_file(). The old helper
functions __git_complete_file() and __git_complete_revlist() are
changed to be a direct wrapper around the new
__git_complete_revlist_file(), because they might be used in
user-supplied completion scripts and we don't want to break them.
This change will cause some wrong suggestions for other commands which
use __git_complete_file() ('git diff' and friends) or
__git_complete_revlist() ('git log' and friends), e.g. 'git diff
...master:Doc<TAB>' and 'git log master:Doc<TAB>' will complete the
path to 'Documentation/', although neither commands make any sense.
However, both of these were actively wrong to begin with as soon as
the user entered the ':', so there is no real harm done.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set up some plumbing: teach the svndump lib to pass a file descriptor
number to the fast_export lib, representing where cat-blob/ls
responses can be read from, and add a get_response_line helper
function to the fast_export lib to read a line from that file.
Unfortunately this means that svn-fe needs file descriptor 3 to be
redirected from somewhere (preferrably the cat-blob stream of a
fast-import backend); otherwise it will fail:
$ svndump <path> | svn-fe
fatal: cannot read from file descriptor 3: Bad file descriptor
For the moment, "svn-fe 3</dev/null" works as a workaround but it
will not work for very long. A fast-import backend that can retrieve
old commits is needed in order to be able to fulfill svn
"Node-copyfrom-rev" requests that refer to revs from a previous run.
[jn: with new change description]
Based-on-patch-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
* 'svn-fe' of git://repo.or.cz/git/jrn: (31 commits)
fast-import: make code "-Wpointer-arith" clean
vcs-svn: teach line_buffer about temporary files
vcs-svn: allow input from file descriptor
vcs-svn: allow character-oriented input
vcs-svn: add binary-safe read function
t0081 (line-buffer): add buffering tests
vcs-svn: tweak test-line-buffer to not assume line-oriented input
tests: give vcs-svn/line_buffer its own test script
vcs-svn: make test-line-buffer input format more flexible
vcs-svn: teach line_buffer to handle multiple input files
vcs-svn: collect line_buffer data in a struct
vcs-svn: replace buffer_read_string memory pool with a strbuf
vcs-svn: eliminate global byte_buffer
fast-import: add 'ls' command
vcs-svn: Allow change nodes for root of tree (/)
vcs-svn: Implement Prop-delta handling
vcs-svn: Sharpen parsing of property lines
vcs-svn: Split off function for handling of individual properties
vcs-svn: Make source easier to read on small screens
vcs-svn: More dump format sanity checks
...
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pw/p4:
git-p4: support clone --bare
git-p4: decode p4 wildcard characters
git-p4: better message for "git-p4 sync" when not cloned
git-p4: reinterpret confusing p4 message
git-p4: accommodate new move/delete type in p4
git-p4: add missing newline in initial import message
git-p4: fix key error for p4 problem
git-p4: test script
* git://github.com/gitster/git:
vcs-svn: Allow change nodes for root of tree (/)
vcs-svn: Implement Prop-delta handling
vcs-svn: Sharpen parsing of property lines
vcs-svn: Split off function for handling of individual properties
vcs-svn: Make source easier to read on small screens
vcs-svn: More dump format sanity checks
vcs-svn: Reject path nodes without Node-action
vcs-svn: Delay read of per-path properties
vcs-svn: Combine repo_replace and repo_modify functions
vcs-svn: Replace = Delete + Add
vcs-svn: handle_node: Handle deletion case early
vcs-svn: Use mark to indicate nodes with included text
vcs-svn: Unclutter handle_node by introducing have_props var
vcs-svn: Eliminate node_ctx.mark global
vcs-svn: Eliminate node_ctx.srcRev global
vcs-svn: Check for errors from open()
vcs-svn: Allow simple v3 dumps (no deltas yet)
Conflicts:
t/t9010-svn-fe.sh
vcs-svn/svndump.c
In an attempt to overwrite the 'Description:' section of the p4 change
log to include the git commit messages, it also overwrote the 'Jobs:'
section. Â This fix restores the 'Job:' section.
Signed-off-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the git prompt (when enabled) show a CHERRY-PICKING indicator
when we are in the middle of a conflicted cherry-pick, analogous
to the existing MERGING and BISECTING flags.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new config options:
git-p4.detectCopies - Enable copy detection.
git-p4.detectCopiesHarder - Find copies harder.
The detectCopies option should be set to a true/false value.
The detectCopiesHarder option should be set to true/false value.
P4Submit can now process diff-tree C status and integrate files accordingly.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only open files for edit after integrating if the SHA1 of source and destination
differ from each other.
Add git config option detectRenames to allow permanent rename detection. This
options should be set to a true/false value.
Rename "detectRename" variable to "detectRenames" to make it more coherent with
the description in git man pages, which always use plural.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like git clone --bare, build a .git directory but no
checked out files.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option.
They are stored in %xx notation, and when checked out, p4
converts them back to normal.
This patch does the same thing when importing into git,
converting the four special characters. Without this change,
the files appear with literal %xx in their names.
Be careful not to produce "*" in filenames on windows. That
will fail.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common error is to do "git-p4 sync" in a repository that
was not initialized by "git-p4 clone". There will be no
p4 refs. The error message in this case is a traceback
for an assertion, which is confusing.
Change it instead to explain the likely problem.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error output will look like this:
glom$ git p4 clone //deopt
Importing from //deopt into .
Reinitialized existing Git repository in /tmp/x/.git/
Doing initial import of //deopt from revision #head into refs/remotes/p4/master
p4 returned an error: //deopt/... - must refer to client glom.
This particular p4 error is misleading.
Perhaps the depot path was misspelled.
Depot path: //deopt
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
562d53f (git-p4: Fix sync errors due to new server version, 2010-01-21)
taught git-p4 sync to recognize the new move/delete type, but this type
can also show up in an initial clone and labels output.
Instead of replicating the support in three places, hoist the definition
somewhere global.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some p4 failures result in an error, but the info['code'] is not
set. These include a bad p4 executable, or a core dump from p4,
and other odd internal errors where p4 fails to generate proper
marshaled output.
Make sure the info key exists before using it to avoid a python
traceback.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the p4 client spec, this attempts to obey the client's
output preferences.
For example, a view like
//depot/foo/branch/... //client/branch/foo/...
//depot/bar/branch/... //client/branch/bar/...
will result in a directory layout in the git tree of
branch/
branch/foo
branch/bar
p4 can do various other reordering that this change doesn't support,
but we should detect it and at least fail nicely.
Signed-off-by: Ian Wienand <ianw@vmware.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
svn-fe is young and some coming cleanups might involve backward
incompatible UI changes. Add some words of warning to the manual so
early adopters that are not following the project closely don't get
burned.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, this would allow cherry-picking or reverting patches from
a piece of history with a different end-of-line style, like so:
$ git revert -Xrenormalize old-problematic-commit
Currently that is possible with manual use of merge-recursive but the
cherry-pick/revert porcelain does not expose the functionality.
While at it, document the existing support for --strategy.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pd/bash-4-completion:
bash: simple reimplementation of _get_comp_words_by_ref
bash: get --pretty=m<tab> completion to work with bash v4
Conflicts:
contrib/completion/git-completion.bash
Quite a few configuration variables have been added since 226b343
(completion: add missing configuration variables to _git_config(),
2009-05-03). Add these variables to the Bash completion script.
Also remove the obsolete 'add.ignore-errors' and
'color.grep.external', as well as 'diff.renameLimit.', which never
existed and rename the misspelled 'sendemail.aliasesfiletype'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Promote" the reflog command out of plumbing, so that we now run
completion for it. After all, it's listed under porcelain (ancillary),
and we do run completion for those commands.
Add basic completion for the three subcommands - show, expire, delete.
Try completing refs for these too.
Helped-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' (early part): (529 commits)
completion: fix zsh check under bash with 'set -u'
Fix copy-pasted comments related to tree diff handling.
Git 1.7.3.2
{cvs,svn}import: use the new 'git read-tree --empty'
t/t9001-send-email.sh: fix stderr redirection in 'Invalid In-Reply-To'
Clarify and extend the "git diff" format documentation
git-show-ref.txt: clarify the pattern matching
documentation: git-config minor cleanups
Update test script annotate-tests.sh to handle missing/extra authors
Better advice on using topic branches for kernel development
Documentation: update implicit "--no-index" behavior in "git diff"
Documentation: expand 'git diff' SEE ALSO section
Documentation: diff can compare blobs
Documentation: gitrevisions is in section 7
fast-import: Allow filemodify to set the root
shell portability: no "export VAR=VAL"
CodingGuidelines: reword parameter expansion section
Documentation: update-index: -z applies also to --index-info
gitweb: Improve behavior for actionless path_info gitweb URLs
gitweb: Fix bug in evaluate_path_info
...
Conflicts:
GIT-VERSION-GEN
RelNotes
contrib/completion/git-completion.bash
Add a minimal implementation of _get_comp_words_by_ref so
$ git show head:g <tab><tab>
on bash 4 can complete paths within the head commit without requiring
the bash_completion functions to be loaded. This is a follow-up to
the previous patch (bash: get --pretty=m<tab> completion to work with
bash v4).
Based on bash-completion 2.x (commit bf763033, 2010-10-26) but tweaked
for simplicity and to allow zsh to parse the code.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: SZEDER Gábor <szeder@ira.uka.de>
Bash's programmable completion provides the COMP_WORDS array variable,
which holds the individual words in the current command line. In bash
versions prior to v4 "words are split on shell metacharacters as the
shell parser would separate them" (quote from bash v3.2.48's man
page). This behavior has changed with bash v4, and the command line
"is split into words as readline would split it, using COMP_WORDBREAKS
as" "the set of characters that the readline library treats as word
separators" (quote from bash v4's man page).
Since COMP_WORDBREAKS contains the characters : and = by default, this
behavior change in bash affects git's completion script. For example,
before bash 4, running
$ git log --pretty=m <tab><tab>
would give a list of pretty-printing formats starting with 'm' but now
it completes on branch names.
It would be possible to work around this by removing '=' and ':' from
COMP_WORDBREAKS, but as noticed in v1.5.6.4~9^2 (bash completion:
Resolve git show ref:path<tab> losing ref: portion, 2008-07-15), that
would break *other* completion scripts. The bash-completion library
includes a better workaround: the _get_comp_words_by_ref function
re-assembles a copy of COMP_WORDS, excluding a collection of word
separators of the caller's choice. Use it.
As a bonus, this also improves behavior when tab is pressed with the
cursor in the middle of a word.
To avoid breaking setups with the bash-completion library not already
loaded, if the _get_comp_words_by_ref function is not defined then a
shim that just reads COMP_WORDS will be used instead (no change from
the current behavior in that case).
Signed-off-by: Peter van der Does <peter@avirtualhome.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Explained-by: SZEDER Gábor <szeder@ira.uka.de>
The function was returning 0 for failure and 1 for success which was
breaking the logic in the main loop. It now also returns in all
cases, rather than exiting.
Signed-off-by: Alan Raison <alan@theraisons.me.uk>
Acked-by: Kevin P. Fleming <kpfleming@digium.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
* maint-1.7.2:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
The bash prompt would display a commit's object name when having checked
out a lightweight tag. Provide `--tags` to `git describe` in the completion
script, so it will display lightweight tag names, as it already does for
annotated tags.
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/phrase-remote-tracking:
git-branch.txt: mention --set-upstream as a way to change upstream configuration
user-manual: remote-tracking can be checked out, with detached HEAD
user-manual.txt: explain better the remote(-tracking) branch terms
Change incorrect "remote branch" to "remote tracking branch" in C code
Change incorrect uses of "remote branch" meaning "remote-tracking"
Change "tracking branch" to "remote-tracking branch"
everyday.txt: change "tracking branch" to "remote-tracking branch"
Change remote tracking to remote-tracking in non-trivial places
Replace "remote tracking" with "remote-tracking"
Better "Changed but not updated" message in git-status
test-svn-fe segfaults when passed a bogus path. Simplify debugging by
exiting with a meaningful error message instead.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sg/completion:
bash: support pretty format aliases
bash: support more 'git notes' subcommands and their options
bash: not all 'git bisect' subcommands make sense when not bisecting
bash: offer refs for 'git bisect start'
