When extra command line arguments are given to a command that
was alias-expanded, the code generated a wrong argument list,
leaving the original alias in the result, and forgetting to
terminate the new argv list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
By being an internal command git-get-commit-id can make use of
struct ustar_header and other stuff and stops wasting precious
disk space.
Note: I recycled one of the two "tar-tree" entries instead of
splitting that cleanup into a separate patch.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This disables alias "foo" from being used for git-foo, and when
we do use alias we check the built-in and then existing command
names first and then alias as the fallback. This avoids the
problem of common commands used in scripts getting clobbered by
user specific aliases.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[alias]
l = "log --stat -M ORIG_HEAD.."
you can call
git l
and it will do the same as
git log --stat -M ORIG_HEAD..
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes "git format-patch" a built-in.
* js/fmt-patch:
git-rebase: use canonical A..B syntax to format-patch
git-format-patch: now built-in.
fmt-patch: Support --attach
fmt-patch: understand old <his> notation
Teach fmt-patch about --keep-subject
Teach fmt-patch about --numbered
fmt-patch: implement -o <dir>
fmt-patch: output file names to stdout
Teach fmt-patch to write individual files.
Use RFC2822 dates from "git fmt-patch".
git-fmt-patch: thinkofix to show [PATCH] properly.
rename internal format-patch wip
Minor tweak on subject line in --pretty=email
Tentative built-in format-patch.
This makes 'git add' and 'git rm' built-ins.
* lt/dirwalk:
Add builtin "git rm" command
Move pathspec matching from builtin-add.c into dir.c
Prevent bogus paths from being added to the index.
builtin-add: fix unmatched pathspec warnings.
Remove old "git-add.sh" remnants
builtin-add: warn on unmatched pathspecs
Do "git add" as a builtin
Clean up git-ls-file directory walking library interface
libify git-ls-files directory traversal
* master: (119 commits)
diff family: add --check option
Document that "git add" only adds non-ignored files.
Add a conversion tool to migrate remote information into the config
fetch, pull: ask config for remote information
Fix build procedure for builtin-init-db
read-tree -m -u: do not overwrite or remove untracked working tree files.
apply --cached: do not check newly added file in the working tree
Implement a --dry-run option to git-quiltimport
Implement git-quiltimport
Revert "builtin-grep: workaround for non GNU grep."
builtin-grep: workaround for non GNU grep.
builtin-grep: workaround for non GNU grep.
git-am: use apply --cached
apply --cached: apply a patch without using working tree.
apply --numstat: show new name, not old name.
Documentation/Makefile: create tarballs for the man pages and html files
Allow pickaxe and diff-filter options to be used by git log.
Libify the index refresh logic
Builtin git-init-db
Remove unnecessary local in get_ref_sha1.
...
This makes tar-tree a built-in. As an added bonus, you can now
say:
git tar-tree --remote=remote-repository <ent> [<base>]
This does not work with git-daemon yet, but should work with
localhost and git over ssh transports.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes semantics very subtly, because it adds a new atomicity
guarantee.
In particular, if you "git rm" several files, it will now do all or
nothing. The old shell-script really looped over the removed files one by
one, and would basically randomly fail in the middle if "-f" was used and
one of the files didn't exist in the working directory.
This C builtin one will not re-write the index after each remove, but
instead remove all files at once. However, that means that if "-f" is used
(to also force removal of the file from the working directory), and some
files have already been removed from the workspace, it won't stop in the
middle in some half-way state like the old one did.
So what happens is that if the _first_ file fails to be removed with "-f",
we abort the whole "git rm". But once we've started removing, we don't
leave anything half done. If some of the other files don't exist, we'll
just ignore errors of removal from the working tree.
This is only an issue with "-f", of course.
I think the new behaviour is strictly an improvement, but perhaps more
importantly, it is _different_. As a special case, the semantics are
identical for the single-file case (which is the only one our test-suite
seems to test).
The other question is what to do with leading directories. The old "git
rm" script didn't do anything, which is somewhat inconsistent. This one
will actually clean up directories that have become empty as a result of
removing the last file, but maybe we want to have a flag to decide the
behaviour?
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Basically this just renames init-db.c to builtin-init-db.c and makes
some strings const.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was surprisingly easy. The diff is truly minimal: rename "main()" to
"cmd_rev_list()" in rev-list.c, and rename the whole file to reflect its
new built-in status.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
First try. Let's see how well this works.
In many ways, the hard parts of "git commit" are not so different from
this, and a builtin commit would share a lot of the code, I think.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/grep: (22 commits)
Fix silly typo in new builtin grep
builtin-grep: unparse more command line options.
builtin-grep: use external grep when we can take advantage of it
builtin-grep: -F (--fixed-strings)
builtin-grep: -w fix
builtin-grep: typofix
builtin-grep: tighten argument parsing.
builtin-grep: documentation
Teach -f <file> option to builtin-grep.
builtin-grep: -L (--files-without-match).
builtin-grep: binary files -a and -I
builtin-grep: terminate correctly at EOF
builtin-grep: tighten path wildcard vs tree traversal.
builtin-grep: support -w (--word-regexp).
builtin-grep: support -c (--count).
builtin-grep: allow more than one patterns.
builtin-grep: allow -<n> and -[ABC]<n> notation for context lines.
builtin-grep: printf %.*s length is int, not ptrdiff_t.
builtin-grep: do not use setup_revisions()
builtin-grep: support '-l' option.
...
* master: (109 commits)
t1300-repo-config: two new config parsing tests.
Another config file parsing fix.
update-index: plug memory leak from prefix_path()
checkout-index: plug memory leak from prefix_path()
update-index --unresolve: work from a subdirectory.
pack-object: squelch eye-candy on non-tty
core.prefersymlinkrefs: use symlinks for .git/HEAD
repo-config: trim white-space before comment
Fix for config file section parsing.
Clarify git-cherry documentation.
Update git-unpack-objects documentation.
Fix up docs where "--" isn't displayed correctly.
Several trivial documentation touch ups.
git-svn 1.0.0
git-svn: documentation updates
delta: stricter constness
Makefile: do not link rev-list any specially.
builtin-push: --all and --tags _are_ explicit refspecs
builtin-log/whatchanged/show: make them official.
show-branch: omit uninteresting merges.
...
This attempts to set up built-in "git grep" to further reduce
our dependence on the shell, while at the same time optionally
allowing to run grep against object database. You could do
funky things like these:
git grep --cached -e pattern ;# grep from index
git grep -e pattern master ;# or in a rev
git grep -e pattern master next ;# or in multiple revs
git grep -e pattern pu^@ ;# even like this with an
;# extension from another topic ;-)
git grep -e pattern master..next ;# or even from rev ranges
git grep -e pattern master~20:Documentation
;# or an arbitrary tree
git grep -e pattern next:git-commit.sh
;# or an arbitrary blob
Right now, it does not understand and/or obey many options grep
should accept, and the pattern must be given with -e option due
to the way the parameter parser is structured, both of which
obviously need to be fixed for usability.
But this is going in the right direction. The shell script
version is one of the worst Portability offender in the git
barebone Porcelainish; it uses xargs -0 to pass paths around and
shell arrays to sift flags and parameters.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also it learned to do -v (verbose) to report:
- number of loose objects
- disk occupied by loose objects
- number of objects in local packs
- number of loose objects that are also in pack
- unrecognised garbage in .git/objects/??/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When I split out the builtin commands into their own files, I left the
include of <sys/ioctl.h> in git.c rather than moving it to the file that
needed it (builtin-help.c).
Nobody seems to have noticed, because everything still worked, but because
the TIOCGWINSZ macro was now no longer defined when compiling the
"term_columns()" function, it would no longer automatically notice the
terminal size unless your system used the ancient "COLUMNS" environment
variable approach.
Trivially fixed by just moving the header include to the file that
actually needs it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
Split up builtin commands into separate files from git.c
git-log produces no output
fix pack-object buffer size
mailinfo: decode underscore used in "Q" encoding properly.
Reintroduce svn pools to solve the memory leak.
pack-objects: do not stop at object that is "too small"
git-commit --amend: two fixes.
get_tree_entry(): make it available from tree-walk
sha1_name.c: no need to include diff.h; tree-walk.h will do.
sha1_name.c: prepare to make get_tree_entry() reusable from others.
get_sha1() shorthands for blob/tree objects
pre-commit hook: complain about conflict markers.
git-merge: a bit more readable user guidance.
diff: move diff.c to diff-lib.c to make room.
git log: don't do merge diffs by default
Allow "git repack" users to specify repacking window/depth
Document git-clone --reference
Fix filename scaling for binary files
Fix uninteresting tags in new revision parsing
Conflicts:
Adjusted the addition of fmt-patch to match the recent split
from git.c to builtin.log.c.
Right now it split it into "builtin-log.c" for log-related commands
("log", "show" and "whatchanged"), and "builtin-help.c" for the
informational commands (usage printing and "help" and "version").
This just makes things easier to read, I find.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I personally prefer "ignore_merges" to be on by default, because quite
often the merge diff is distracting and not interesting. That's true both
with "-p" and with "--stat" output.
If you want output from merges, you can trivially use the "-m", "-c" or
"--cc" flags to tell that you're interested in merges, which also tells
the diff generator what kind of diff to do (for --stat, any of the three
will do, of course, but they differ for plain patches or for
--patch-with-stat).
This trivial patch just removes the two lines that tells "git log" not to
ignore merges. It will still show the commit log message, of course, due
to the "always_show_header" part.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This only does --stdout right now. To write into separate files
with pretty-printed filenames like the real thing does, it needs
a bit mroe work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Sun, 16 Apr 2006, Junio C Hamano wrote:
>
> In the mid-term, I am hoping we can drop the generate_header()
> callchain _and_ the custom code that formats commit log in-core,
> found in cmd_log_wc().
Ok, this was nastier than expected, just because the dependencies between
the different log-printing stuff were absolutely _everywhere_, but here's
a patch that does exactly that.
The patch is not very easy to read, and the "--patch-with-stat" thing is
still broken (it does not call the "show_log()" thing properly for
merges). That's not a new bug. In the new world order it _should_ do
something like
if (rev->logopt)
show_log(rev, rev->logopt, "---\n");
but it doesn't. I haven't looked at the --with-stat logic, so I left it
alone.
That said, this patch removes more lines than it adds, and in particular,
the "cmd_log_wc()" loop is now a very clean:
while ((commit = get_revision(rev)) != NULL) {
log_tree_commit(rev, commit);
free(commit->buffer);
commit->buffer = NULL;
}
so it doesn't get much prettier than this. All the complexity is entirely
hidden in log-tree.c, and any code that needs to flush the log literally
just needs to do the "if (rev->logopt) show_log(...)" incantation.
I had to make the combined_diff() logic take a "struct rev_info" instead
of just a "struct diff_options", but that part is pretty clean.
This does change "git whatchanged" from using "diff-tree" as the commit
descriptor to "commit", and I changed one of the tests to reflect that new
reality. Otherwise everything still passes, and my other tests look fine
too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make sure "git show" always show the header, regardless of whether there
is a diff or not.
Also, make sure "always_show_header" actually works, since generate_header
only tested it in one out of three return paths.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the decision to print the log message, while diff
options are in effect, to log-tree. It gives behaviour closer
to the traditional one.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
pager: do not fork a pager if PAGER is set to empty.
diff-options: add --patch-with-stat
diff-files --stat: do not dump core with unmerged index.
Support "git cmd --help" syntax
diff --stat: do not do its own three-dashes.
diff-tree: typefix.
GIT v1.3.0-rc4
xdiff: post-process hunks to make them consistent.
This uses the "--no-walk" flag that I never actually implemented (but I'm
sure I mentioned it) to make "git show" be essentially the same thing as
"git whatchanged --no-walk".
It just refuses to add more interesting parents to the revision walking
history, so you don't actually get any history, you just get the commit
you asked for.
I was going to add "--no-walk" as a real argument flag to git-rev-list
too, but I'm not sure anybody actually needs it. Although it might be
useful for porcelain, so I left the door open.
[jc: ported to the unified option structure by Linus]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Split internal "git log" into reusable piece and add "git
whatchanged". This is based on the option parsing unification
work Linus did.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merging all three option parsers related to whatchanged is
unarguably the right thing, but the fallout was too big to scare
me away. Let's try it once again, but once step at time.
This splits out init_revisions() call from setup_revisions(), so
that the callers can set different defaults to match the
traditional benaviour.
The rev-list command is still broken in a big way, which is the
topic of next step.
Signed-off-by: Junio C Hamano <junkio@cox.net>
