Test '--max-age=c3, --topo-order' in t6003-rev-list-topo-order.sh has
been commented out as failing since its introduction in [1]. However,
the test is successful at least since commit [2] -- bisecting further is
harder because of incompatibility of such old Git code with modern
header file <openssl/bn.h> [3].
Uncomment this test to gain test coverage.
[1] f573571a21 ([PATCH] Add t/t6003 with some --topo-order tests,
2005-07-07)
[2] 765ac8ec46 (Rip out merge-order and make "git log <paths>..." work
again., 2006-02-28)
[3] BIGNUM used in git's `epoch.c` which was removed in [2] changed
significantly between OpenSSL 1.0.2 and OpenSSL 1.1.0
See also https://stackoverflow.com/a/42295243/1083697 and
https://lore.kernel.org/git/Y71qiCs+oAS2OegH@coredump.intra.peff.net/
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format of a line in /proc/cpuinfo that describes a CPU on s390x
looked different from everybody else, and the code in chainlint.pl
failed to parse it.
* ah/chainlint-cpuinfo-parse-fix:
chainlint.pl: fix /proc/cpuinfo regexp
Resolve symbolic links when processing the locations of alternate
object stores, since failing to do so can lead to confusing and buggy
behavior.
* gc/resolve-alternate-symlinks:
object-file: use real paths when adding alternates
Add one more candidate directory that may house httpd modules while
running tests.
* es/locate-httpd-module-location-in-test:
lib-httpd: extend module location auto-detection
"git prune" may try to iterate over .git/objects/pack for trash
files to remove in it, and loudly fail when the directory is
missing, which is not necessary. The command has been taught to
ignore such a failure.
* ew/prune-with-missing-objects-pack:
prune: quiet ENOENT on missing directories
Assorted fixes of parsing end-user input as integers.
* pw/config-int-parse-fixes:
git_parse_signed(): avoid integer overflow
config: require at least one digit when parsing numbers
git_parse_unsigned: reject negative values
`parse_object()` hardening when checking for the existence of a
suspected blob object.
* jk/parse-object-type-mismatch:
parse_object(): simplify blob conditional
parse_object(): check on-disk type of suspected blob
parse_object(): drop extra "has" check before checking object type
When adding an alternate ODB, we check if the alternate has the same
path as the object dir, and if so, we do nothing. However, that
comparison does not resolve symlinks. This makes it possible to add the
object dir as an alternate, which may result in bad behavior. For
example, it can trick "git repack -a -l -d" (possibly run by "git gc")
into thinking that all packs come from an alternate and delete all
objects.
rm -rf test &&
git clone https://github.com/git/git test &&
(
cd test &&
ln -s objects .git/alt-objects &&
# -c repack.updateserverinfo=false silences a warning about not
# being able to update "info/refs", it isn't needed to show the
# bad behavior
GIT_ALTERNATE_OBJECT_DIRECTORIES=".git/alt-objects" git \
-c repack.updateserverinfo=false repack -a -l -d &&
# It's broken!
git status
# Because there are no more objects!
ls .git/objects/pack
)
Fix this by resolving symlinks and relative paths before comparing the
alternate and object dir. This lets us clean up a number of issues noted
in 37a95862c6 (alternates: re-allow relative paths from environment,
2016-11-07):
- Now that we compare the real paths, duplicate detection is no longer
foiled by relative paths.
- Using strbuf_realpath() allows us to "normalize" paths that
strbuf_normalize_path() can't, so we can stop silently ignoring errors
when "normalizing" paths from the environment.
- We now store an absolute path based on getcwd() (the "future
direction" named in 37a95862c6), so chdir()-ing in the process no
longer changes the directory pointed to by the alternate. This is a
change in behavior, but a desirable one.
Signed-off-by: Glen Choo <chooglen@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 81071626ba (trace2: add global counter mechanism, 2022-10-24)
these tests have been failing when git is compiled with NO_PTHREADS=Y,
which is always the case e.g. if 'uname -s' is "NONSTOP_KERNEL".
Reported-by: Randall S. Becker <randall.becker@nexbridge.ca>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" used to use all the local refs as the boundary for
checking connectivity of the data "git push" sent, but now it uses
only the refs that it advertised to the pusher. In a repository with
the .hideRefs configuration, this reduces the resources needed to
perform the check.
cf. <221028.86bkpw805n.gmgdl@evledraar.gmail.com>
cf. <xmqqr0yrizqm.fsf@gitster.g>
* ps/receive-use-only-advertised:
receive-pack: only use visible refs for connectivity check
rev-parse: add `--exclude-hidden=` option
revision: add new parameter to exclude hidden refs
revision: introduce struct to handle exclusions
revision: move together exclusion-related functions
refs: get rid of global list of hidden refs
refs: fix memory leak when parsing hideRefs config
Teach chainlint.pl to show corresponding line numbers when printing
the source of a test.
* es/chainlint-lineno:
chainlint: prefix annotated test definition with line numbers
chainlint: latch line numbers at which each token starts and ends
chainlint: sidestep impoverished macOS "terminfo"
Fix a source of flakiness in CI when compiling with SANITIZE=leak.
* ab/t7610-timeout:
t7610: use "file:///dev/null", not "/dev/null", fixes MinGW
t7610: fix flaky timeout issue, don't clone from example.com
'git maintenance register' is taught to write configuration to an
arbitrary path, and 'git for-each-repo' is taught to expand tilde
characters in paths.
* rp/maintenance-qol:
builtin/gc.c: fix use-after-free in maintenance_unregister()
maintenance --unregister: fix uninit'd data use & -Wdeclaration-after-statement
maintenance: add option to register in a specific config
for-each-repo: interpolate repo path arguments
Correct an error where `git rebase` would mistakenly use a branch or
tag named "refs/rewritten/xyz" when missing a rebase label.
* pw/strict-label-lookups:
sequencer: tighten label lookups
sequencer: unify label lookup
Redact headers from cURL's h2h3 module in GIT_CURL_VERBOSE and
others.
* gc/redact-h2h3-headers:
http: redact curl h2h3 headers in info
t: run t5551 tests with both HTTP and HTTP/2
Teach chainlint.pl to annotate the original test definition instead
of the token stream.
* es/chainlint-output:
chainlint: annotate original test definition rather than token stream
chainlint: latch start/end position of each token
chainlint: tighten accuracy when consuming input stream
chainlint: add explanatory comments
'scalar reconfigure -a' is taught to automatically remove
scalar.repo entires which no longer exist.
* js/remove-stale-scalar-repos:
tests(scalar): tighten the stale `scalar.repo` test some
scalar reconfigure -a: remove stale `scalar.repo` entries
Fix a regression in the bisect-helper which mistakenly treats
arguments to the command given to 'git bisect run' as arguments to
the helper.
* dd/bisect-helper-subcommand:
bisect--helper: parse subcommand with OPT_SUBCOMMAND
bisect--helper: move all subcommands into their own functions
bisect--helper: remove unused options
Preparation to remove git-submodule.sh and replace it with a builtin.
* ab/submodule-helper-prep-only:
submodule--helper: use OPT_SUBCOMMAND() API
submodule--helper: drop "update --prefix <pfx>" for "-C <pfx> update"
submodule--helper: remove --prefix from "absorbgitdirs"
submodule API & "absorbgitdirs": remove "----recursive" option
submodule.c: refactor recursive block out of absorb function
submodule tests: test for a "foreach" blind-spot
submodule--helper: fix a memory leak in "status"
submodule tests: add tests for top-level flag output
submodule--helper: move "config" to a test-tool
29fb2ec3 (chainlint.pl: validate test scripts in parallel,
2022-09-01) introduced a function that gets the number of cores from
/proc/cpuinfo on some systems, notably linux.
The regexp it uses (^processor\s*:) fails to match the desired lines in
the s390x architecture, where they look like this:
processor 0: version = FF, identification = 148F67, machine = 2964
As a result, on s390x that function returns 0 as the number of cores,
and the chainlint.pl script exits without doing anything.
Signed-off-by: Andreas Hasenack <andreas.hasenack@canonical.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although it is possible to manually set LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH to point at the location of `httpd` and its
modules, doing so is cumbersome and easily forgotten. To address this,
0d344738dc (t/lib-http.sh: Restructure finding of default httpd
location, 2010-01-02) enhanced lib-httpd.sh to automatically detect the
location of `httpd` and its modules in order to facilitate out-of-the-
box testing on a wider range of platforms. Follow that lead by further
enhancing it to automatically detect the `httpd` modules on Void Linux,
as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test case "push with config push.useBitmap" of t5516 was introduced
in commit 82f67ee13f (send-pack.c: add config push.useBitmaps,
2022-06-17). It won't work in verbose mode, e.g.:
$ sh t5516-fetch-push.sh --run='1,115' -v
This is because "git-push" will run in a tty in this case, and the
subcommand "git pack-objects" will contain an argument "--progress"
instead of "-q". Adding a specific option "--quiet" to "git push" will
get a stable result for t5516.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$GIT_DIR/objects/pack may be removed to save inodes in shared
repositories. Quiet down prune in cases where either
$GIT_DIR/objects or $GIT_DIR/objects/pack is non-existent,
but emit the system error in other cases to help users diagnose
permissions problems or resource constraints.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a preceding commit we fully applied the
"index-compatibility.pending.cocci" rule to "t/helper/*".
Let's now stop defining "USE_THE_INDEX_COMPATIBILITY_MACROS" in
test-tool.h itself, and instead instead define
"USE_THE_INDEX_VARIABLE" in the individual test helpers that need
it. This mirrors how we do the same thing in the "builtin/" directory.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the "index-compatibility.pending.cocci" rule to the "t/helper/*"
directory, a subsequent commit will extend cache.h to further narrow
down the use of "USE_THE_INDEX_COMPATIBILITY_MACROS" in this area.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid calling 'cache_tree_update()' when doing so would be redundant.
* vd/skip-cache-tree-update:
rebase: use 'skip_cache_tree_update' option
read-tree: use 'skip_cache_tree_update' option
reset: use 'skip_cache_tree_update' option
unpack-trees: add 'skip_cache_tree_update' option
cache-tree: add perf test comparing update and prime
`git rebase --update-refs` would delete references when all `update-ref`
commands in the sequencer were removed, which has been corrected.
* vd/update-refs-delete:
rebase --update-refs: avoid unintended ref deletion
"git repack" learns to send cruft objects out of the way into
packfiles outside the repository.
* tb/repack-expire-to:
builtin/repack.c: implement `--expire-to` for storing pruned objects
builtin/repack.c: write cruft packs to arbitrary locations
builtin/repack.c: pass "cruft_expiration" to `write_cruft_pack`
builtin/repack.c: pass "out" to `prepare_pack_objects`
Makefile comments updates and reordering to clarify knobs used to
choose SHA implementations.
* ab/sha-makefile-doc:
Makefile: discuss SHAttered in *_SHA{1,256} discussion
Makefile: document default SHA-1 backend on OSX
Makefile & test-tool: replace "DC_SHA1" variable with a "define"
Makefile: document SHA-1 and SHA-256 default and selection order
Makefile: document default SHA-256 backend
Makefile: rephrase the discussion of *_SHA1 knobs
Makefile: create and use sections for "define" flag listing
Makefile: correct DC_SHA1 documentation
INSTALL: remove discussion of SHA-1 backends
Makefile: always (re)set DC_SHA1 on fallback
Various test updates.
* ab/misc-hook-submodule-run-command:
run-command tests: test stdout of run_command_parallel()
submodule tests: reset "trace.out" between "grep" invocations
hook tests: fix redirection logic error in 96e7225b31
In parse_object(), we try to handle blobs by streaming rather than
loading them entirely into memory. The most common case here will be
that we haven't seen the object yet and check oid_object_info(), which
tells us we have a blob.
But we trigger this code on one other case: when we have an in-memory
object struct with type OBJ_BLOB (and without its "parsed" flag set,
since otherwise we'd return early from the function). This indicates
that some other part of the code suspected we have a blob (e.g., it was
mentioned by a tree or tag) but we haven't yet looked at the on-disk
copy.
In this case before hitting the streaming path, we check if we have the
object on-disk at all. This is mostly pointless extra work, as the
streaming path would complain if it couldn't open the object (albeit
with the message "hash mismatch", which is a little misleading).
But it's also insufficient to catch all problems. The streaming code
will only tell us "yes, the on-disk object matches the oid". But it
doesn't actually confirm that what we found was indeed a blob, and
neither does repo_has_object_file().
One way to improve this would be to teach stream_object_signature() to
check the type (either by returning it to us to check, or taking an
"expected" type). But there's an even simpler fix here: if we suspect
the object is a blob, just call oid_object_info() to confirm that we
have it on-disk, and that it really is a blob.
This is slightly less efficient than teaching stream_object_signature()
to do it (since it has to open the object already). But this case very
rarely comes up. In practice, we usually don't have any clue what the
type is, in which case we already call oid_object_info(). This
"suspected" case happens only when some other code created an object
struct but didn't actually parse the blob, which is actually tricky to
trigger at all (see the discussion of the test below).
I reworked the conditional a bit so that instead of:
if ((suspected_blob && oid_object_info() == OBJ_BLOB)
(no_clue && oid_object_info() == OBJ_BLOB)
we have the simpler:
if ((suspected_blob || no_clue) && oid_object_info() == OBJ_BLOB)
This is shorter, but also reflects what we really want say, which is
"have we ruled out this being a blob; if not, check it on-disk".
In either case, if oid_object_info() fails to tell us it's a blob, we'll
skip the streaming code path and call repo_read_object_file(), just as
before. And if we really do have a mismatch with the existing object
struct, we'll eventually call lookup_commit(), etc, via
parse_object_buffer(), which will complain that it doesn't match our
existing obj->type.
So this fixes one of the lingering expect_failure cases from 0616617c7e
(t: introduce tests for unexpected object types, 2019-04-09). That test
works by peeling a tag that claims to point to a blob (triggering us to
create the struct), but really points to something else, which we later
discover when we call parse_object() as part of the actual traversal).
Prior to this commit, we'd quietly check the sha1 and mark the blob as
"parsed". Now we correctly complain about the mismatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add a new `--exclude-hidden=` option that is similar to the one we just
added to git-rev-list(1). Given a section name `uploadpack` or `receive`
as argument, it causes us to exclude all references that would be hidden
by the respective `$section.hideRefs` configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Users can optionally hide refs from remote users in git-upload-pack(1),
git-receive-pack(1) and others via the `transfer.hideRefs`, but there is
not an easy way to obtain the list of all visible or hidden refs right
now. We'll require just that though for a performance improvement in our
connectivity check.
Add a new option `--exclude-hidden=` that excludes any hidden refs from
the next pseudo-ref like `--all` or `--branches`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
On MinGW the "/dev/null" is translated to "nul" on command-lines, even
though as in this case it'll never end up referring to an actual file.
So on Windows the fix for the previous "example.com" timeout issue in
8354cf752e (t7610: fix flaky timeout issue, don't clone from
example.com, 2022-11-05) would yield:
fatal: repo URL: 'nul' must be absolute or begin with ./|../
Let's evade this yet again by prefixing this with "file://", which
makes this pass in the Windows CI.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
maintenance register currently records the maintenance repo exclusively
within the user's global configuration, but other configuration files
may be relevant when running maintenance if they are included from the
global config. This option allows the user to choose where maintenance
repos are recorded.
Signed-off-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
This is a quality of life change for git-maintenance, so repos can be
recorded with the tilde syntax. The register subcommand will not record
repos in this format by default.
Signed-off-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
With GIT_TRACE_CURL=1 or GIT_CURL_VERBOSE=1, sensitive headers like
"Authorization" and "Cookie" get redacted. However, since [1], curl's
h2h3 module (invoked when using HTTP/2) also prints headers in its
"info", which don't get redacted. For example,
echo 'github.com TRUE / FALSE 1698960413304 o foo=bar' >cookiefile &&
GIT_TRACE_CURL=1 GIT_TRACE_CURL_NO_DATA=1 git \
-c 'http.cookiefile=cookiefile' \
-c 'http.version=' \
ls-remote https://github.com/git/git refs/heads/main 2>output &&
grep 'cookie' output
produces output like:
23:04:16.920495 http.c:678 == Info: h2h3 [cookie: o=foo=bar]
23:04:16.920562 http.c:637 => Send header: cookie: o=<redacted>
Teach http.c to check for h2h3 headers in info and redact them using the
existing header redaction logic. This fixes the broken redaction logic
that we noted in the previous commit, so mark the redaction tests as
passing under HTTP2.
[1] f8c3724aa9
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We have occasionally seen bugs that affect Git running only against an
HTTP/2 web server, not an HTTP one. For instance, b66c77a64e (http:
match headers case-insensitively when redacting, 2021-09-22). But since
we have no test coverage using HTTP/2, we only uncover these bugs in the
wild.
That commit gives a recipe for converting our Apache setup to support
HTTP/2, but:
- it's not necessarily portable
- we don't want to just test HTTP/2; we really want to do a variety of
basic tests for _both_ protocols
This patch handles both problems by running a duplicate of t5551
(labeled as t5559 here) with an alternate-universe setup that enables
HTTP/2. So we'll continue to run t5551 as before, but run the same
battery of tests again with HTTP/2. If HTTP/2 isn't supported on a given
platform, then t5559 should bail during the webserver setup, and
gracefully skip all tests (unless GIT_TEST_HTTPD has been changed from
"auto" to "yes", where the point is to complain when webserver setup
fails).
In theory other http-related test scripts could benefit from the same
duplication, but doing t5551 should give us a reasonable check of basic
functionality, and would have caught both bugs we've seen in the wild
with HTTP/2.
A few notes on the implementation:
- a script enables the server side config by calling enable_http2
before starting the webserver. This avoids even trying to load any
HTTP/2 config for t5551 (which is what lets it keep working with
regular HTTP even on systems that don't support it). This also sets
a prereq which can be used by individual tests.
- As discussed in b66c77a64e, the http2 module isn't compatible with
the "prefork" mpm, so we need to pick something else. I chose
"event" here, which works on my Debian system, but it's possible
there are platforms which would prefer something else. We can adjust
that later if somebody finds such a platform.
- The test "large fetch-pack requests can be sent using chunked
encoding" makes sure we use a chunked transfer-encoding by looking
for that header in the trace. But since HTTP/2 has its own streaming
mechanisms, we won't find such a header. We could skip the test
entirely by marking it with !HTTP2. But there's some value in making
sure that the fetch itself succeeded. So instead, we'll confirm that
either we're using HTTP2 _or_ we saw the expected chunked header.
- the redaction tests fail under HTTP/2 with recent versions of curl.
This is a bug! I've marked them with !HTTP2 here to skip them under
t5559 for the moment. Using test_expect_failure would be more
appropriate, but would require a bunch of boilerplate. Since we'll
be fixing them momentarily, let's just skip them for now to keep the
test suite bisectable, and we can re-enable them in the commit that
fixes the bug.
- one alternative layout would be to push most of t5551 into a
lib-t5551.sh script, then source it from both t5551 and t5559.
Keeping t5551 intact seemed a little simpler, as its one less level
of indirection for people fixing bugs/regressions in the non-HTTP/2
tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Git learned pushing submodules without pushing the superproject by
the user specifying --recurse-submodules=only through 6c656c3fe4
("submodules: add RECURSE_SUBMODULES_ONLY value", 2016-12-20) and
225e8bf778 ("push: add option to push only submodules", 2016-12-20).
For users who use this feature regularly, it is desirable to have an
equivalent configuration.
It turns out that such a configuration (push.recurseSubmodules=only) is
already supported, even though it is neither documented nor mentioned
in the commit messages, due to the way the --recurse-submodules=only
feature was implemented (a function used to parse --recurse-submodules
was updated to support "only", but that same function is used to parse
push.recurseSubmodules too). What is left is to document it and test it,
which is what this commit does.
There is a possible point of confusion when recursing into a submodule
that itself has the push.recurseSubmodules=only configuration, because
if a repository has only its submodules pushed and not itself, its
superproject can never be pushed. Therefore, treat such configurations
as being "on-demand", and print a warning message.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
As pointed out by Stolee, the previous incarnation of this test case was
not stringent enough: we want to verify that _only_ the stale entries
are removed (previously, the test case would have succeeded even if all
entries had been removed).
Let's rectify this and verify that the other entries are left intact.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
As of it is, we're parsing subcommand with OPT_CMDMODE, which will
continue to parse more options even if the command has been found.
When we're running "git bisect run" with a command that expecting
a "--log" or "--no-log" arguments, or one of those "--bisect-..."
arguments, bisect--helper may mistakenly think those options are
bisect--helper's option.
We may fix those problems by passing "--" when calling from
git-bisect.sh, and skip that "--" in bisect--helper. However, it may
interfere with user's "--".
Let's parse subcommand with OPT_SUBCOMMAND since that API was born for
this specific use-case.
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When chainlint detects problems in a test, it prints out the name of the
test script, the name of the problematic test, and a copy of the test
definition with "?!FOO?!" annotations inserted at the locations where
problems were detected. Taken together this information is sufficient
for the test author to identify the problematic code in the original
test definition. However, in a lengthy script or a lengthy test
definition, the author may still end up using the editor's search
feature to home in on the exact problem location.
To further assist the test author, display line numbers along with the
annotated test definition, thus allowing the author to jump directly to
each problematic line.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When chainlint detects problems in a test, it prints out the name of the
test script, the name of the problematic test, and a copy of the test
definition with "?!FOO?!" annotations inserted at the locations where
problems were detected. Taken together this information is sufficient
for the test author to identify the problematic code in the original
test definition. However, in a lengthy script or a lengthy test
definition, the author may still end up using the editor's search
feature to home in on the exact problem location.
To further assist the test author, an upcoming change will display line
numbers along with the annotated test definition, thus allowing the
author to jump directly to each problematic line. As preparation,
upgrade Lexer to latch the line numbers at which each token starts and
ends, and return that information with the token itself.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
