"git interpret-trailers" has been taught a "--parse" and a few
other options to make it easier for scripts to grab existing
trailer lines from a commit log message.
* jk/trailers-parse:
doc/interpret-trailers: fix "the this" typo
pretty: support normalization options for %(trailers)
t4205: refactor %(trailers) tests
pretty: move trailer formatting to trailer.c
interpret-trailers: add --parse convenience option
interpret-trailers: add an option to unfold values
interpret-trailers: add an option to show only existing trailers
interpret-trailers: add an option to show only the trailers
trailer: put process_trailers() options into a struct
The point of "--only-trailers" is to give a caller an output
that's easy for them to parse. Getting rid of the
non-trailer material helps, but we still may see more
complicated syntax like whitespace continuation. Let's add
an option to unfold any continuation, giving the output as a
single "key: value" line per trailer.
As a bonus, this could be used even without --only-trailers
to clean up unusual formatting in the incoming data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to invoke interpret-trailers for the
primary purpose of parsing existing trailers. But in that
case, we don't want to apply existing ifMissing or ifExists
rules from the config. Let's add a special mode where we
avoid applying those rules. Coupled with --only-trailers,
this gives us a reasonable parsing tool.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In theory it's easy for any reader who wants to parse
trailers to do so. But there are a lot of subtle corner
cases around what counts as a trailer, when the trailer
block begins and ends, etc. Since interpret-trailers already
has our parsing logic, let's let callers ask it to just
output the trailers.
They still have to parse the "key: value" lines, but at
least they can ignore all of the other corner cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow using non-default values for trailers without having to set
them up in .gitconfig first. For example, if you have the following
configuration
trailer.signed-off-by.where = end
you may use "--where before" when a patch author forgets his
Signed-off-by and provides it in a separate email. Likewise for
--if-exists and --if-missing
Reverting to the behavior specified by .gitconfig is done with
--no-where, --no-if-exists and --no-if-missing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit message is edited with the "verbose" option, the buffer
will have a cut line and diff after the log message, like so:
my subject
# ------------------------ >8 ------------------------
# Do not touch the line above.
# Everything below will be removed.
diff --git a/foo.txt b/foo.txt
index 5716ca5..7601807 100644
--- a/foo.txt
+++ b/foo.txt
@@ -1 +1 @@
-bar
+baz
"git interpret-trailers" is unaware of the cut line, and assumes the
trailer block would be at the end of the whole thing. This can easily
be seen with:
$ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \
git commit --amend -v
Teach "git interpret-trailers" to notice the cut-line and ignore the
remainder of the input when looking for a place to add new trailer
block. This makes it consistent with how "git commit -v -s" inserts a
new Signed-off-by: line.
This can be done by the same logic as the existing helper function,
wt_status_truncate_message_at_cut_line(), uses, but it wants the caller
to pass a strbuf to it. Because the function ignore_non_trailer() used
by the command takes a <pointer, length> pair, not a strbuf, steal the
logic from wt_status_truncate_message_at_cut_line() to create a new
wt_status_locate_end() helper function that takes <pointer, length>
pair, and make ignore_non_trailer() call it to help "interpret-trailers".
Since there is only one caller of wt_status_truncate_message_at_cut_line()
in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead
and remove the old helper that no longer has any caller.
Signed-off-by: Brian Malehorn <bmalehorn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, interpret-trailers requires that a trailer be only on 1 line.
For example:
a: first line
second line
would be interpreted as one trailer line followed by one non-trailer line.
Make interpret-trailers support RFC 822-style folding, treating those
lines as one logical trailer.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, interpret-trailers allows leading whitespace in trailer
lines. This leads to false positives, especially for quoted lines or
bullet lists.
Forbid leading whitespace in trailers.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, interpret-trailers requires all lines of a trailer block to
be trailers (or comments) - if not it would not identify that block as a
trailer block, and thus create its own trailer block, inserting a blank
line. For example:
echo -e "\nSigned-off-by: x\nnot trailer" |
git interpret-trailers --trailer "c: d"
would result in:
Signed-off-by: x
not trailer
c: d
Relax the definition of a trailer block to require that the trailers (i)
are all trailers, or (ii) contain at least one Git-generated trailer and
consists of at least 25% trailers.
Signed-off-by: x
not trailer
c: d
(i) is the existing functionality. (ii) allows arbitrary lines to be
included in trailer blocks, like those in [1], and still allow
interpret-trailers to be used.
[1]
e7d316a02f
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command line option --in-place to support in-place editing akin to
sed -i. This allows to write commands like the following:
git interpret-trailers --trailer "X: Y" a.txt > b.txt && mv b.txt a.txt
in a more concise way:
git interpret-trailers --trailer "X: Y" --in-place a.txt
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "interpret-trailers" helper mistook a multi-paragraph title of
a commit log message with a colon in it as the end of the trailer
block.
* cc/trailers-corner-case-fix:
trailer: support multiline title
We currently ignore the first line passed to `git interpret-trailers`,
when looking for the beginning of the trailers.
Unfortunately this does not work well when a commit is created with a
line break in the title, using for example the following command:
git commit -m 'place of
code: change we made'
That's why instead of ignoring only the first line, it is better to
ignore the first paragraph.
Signed-off-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"interpret-trailers" helper mistook a single-liner log message that
has a colon as the end of existing trailer.
* cc/trailers-corner-case-fix:
trailer: retitle a test and correct an in-comment message
trailer: ignore first line of message
When looking for the start of the trailers in the message
we are passed, we should ignore the first line of the message.
The reason is that if we are passed a patch or commit message
then the first line should be the patch title.
If we are passed only trailers we can expect that they start
with an empty line that can be ignored too.
This way we can properly process commit messages that have
only one line with something that looks like a trailer, for
example like "area of code: change we made".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure we look for trailers before any conflict line
by reusing the ignore_non_trailer() function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And add a few other tests for some special cases.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
