A mechanism to pack unreachable objects into a "cruft pack",
instead of ejecting them into loose form to be reclaimed later, has
been introduced.
* tb/cruft-packs:
sha1-file.c: don't freshen cruft packs
builtin/gc.c: conditionally avoid pruning objects via loose
builtin/repack.c: add cruft packs to MIDX during geometric repack
builtin/repack.c: use named flags for existing_packs
builtin/repack.c: allow configuring cruft pack generation
builtin/repack.c: support generating a cruft pack
builtin/pack-objects.c: --cruft with expiration
reachable: report precise timestamps from objects in cruft packs
reachable: add options to add_unseen_recent_objects_to_traversal
builtin/pack-objects.c: --cruft without expiration
builtin/pack-objects.c: return from create_object_entry()
t/helper: add 'pack-mtimes' test-tool
pack-mtimes: support writing pack .mtimes files
chunk-format.h: extract oid_version()
pack-write: pass 'struct packing_data' to 'stage_tmp_packfiles'
pack-mtimes: support reading .mtimes files
Documentation/technical: add cruft-packs.txt
A workflow change for translators are being proposed.
* jx/l10n-workflow-change:
l10n: Document the new l10n workflow
Makefile: add "po-init" rule to initialize po/XX.po
Makefile: add "po-update" rule to update po/XX.po
po/git.pot: don't check in result of "make pot"
po/git.pot: this is now a generated file
Makefile: remove duplicate and unwanted files in FOUND_SOURCE_FILES
i18n CI: stop allowing non-ASCII source messages in po/git.pot
Makefile: have "make pot" not "reset --hard"
Makefile: generate "po/git.pot" from stable LOCALIZED_C
Makefile: sort source files before feeding to xgettext
In the next patch, we will implement and test support for writing a
cruft pack via a special mode of `git pack-objects`. To make sure that
objects are written with the correct timestamps, and a new test-tool
that can dump the object names and corresponding timestamps from a given
`.mtimes` file.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To store the individual mtimes of objects in a cruft pack, introduce a
new `.mtimes` format that can optionally accompany a single pack in the
repository.
The format is defined in Documentation/technical/pack-format.txt, and
stores a 4-byte network order timestamp for each object in name (index)
order.
This patch prepares for cruft packs by defining the `.mtimes` format,
and introducing a basic API that callers can use to read out individual
mtimes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core translation is the minimum set of work that must be done for a
new language translation.
There are over 5000 messages in the template message file "po/git.pot"
that need to be translated. It is not a piece of cake for such a huge
workload. So we used to define a small set of messages called "core
translation" that a new l10n contributor must complete before sending
pull request to the l10n coordinator.
By pulling in some parts of the git-po-helper[^1] logic, we add a new
rule to create this core translation message "po/git-core.pot":
make po/git-core.pot
To help new l10n contributors to initialized their "po/XX.pot" from
"po/git-core.pot", we also add new rules "po-init":
make po-init PO_FILE=po/XX.po
[^1]: https://github.com/git-l10n/git-po-helper/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since there is no longer a "po/git.pot" file in tree, a l10n team leader
has to run several commands to update their "po/XX.po" file:
$ make pot
$ msgmerge --add-location --backup=off -U po/XX.po po/git.pot
To make this process easier, add a new rule so that l10n team leaders
can update their "po/XX.po" with one command. E.g.:
$ make po-update PO_FILE=po/zh_CN.po
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "po/git.pot" file from being tracked, which started with
dce37b66fb (l10n: initial git.pot for 1.7.10 upcoming release,
2012-02-13).
The reason the po/git.pot started being checked in was because the
po/*.po files were changed a schema where we'd generate them from a
known-good snapshot of po/git.pot, instead of each translator running
"make pot" themselves.
This makes sense, but we don't need to carry this file in-tree just to
achieve that aim, and doing so has resulted in a significant amount of
"diff churn" since this method of doing it was introduced:
$ git log -p --oneline -- po/git.pot|wc -l
553743
We can instead let l10n contributors to generate "po/git.pot" in runtime
to update their own "po/XX.po", and the l10n coordinator can check
pull requests using CI pipeline.
This reverts to the schema introduced initially in cd5513a716 (i18n:
Makefile: "pot" target to extract messages marked for translation,
2011-02-22).
The actual "git rm" of po/git.pot was in preceding commit to make this
change easier to review, and to preempt the mailing list from blocking
it due to it being too large.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We get source files saved in "$(FOUND_SOURCE_FILES)" by running the
command "git ls-files" or the command "find". We tried to have the
both commands return the same list of files, but apparently the "find"
command will return more files, such as the generated headers. We can
filter out these generated headers to get closer results.
In addition to this, "$(FOUND_SOURCE_FILES)" may contain duplicate
files. E.g. "git-ls-files" may have duplicate entries for the same file
in different staging areas if there are unresolved conflicts in the
working tree. For this case, we can reduce duplicate entries by passing
the option "--deduplicate" to git-ls-files.
Junio reported that when running "make" in a working tree with
unresolved conflicts, "make" may report warnings like below:
Makefile:xxxx: target '.build/pot/po/FOO.c.po' given more than once
in the same rule
The duplicate targets are introduced by the following pattern rule we
added in the preceding commit for incremental build of "po/git.pot".
$(LOCALIZED_C_GEN_PO): .build/pot/po/%.po: %
Although we have resolved this issue by sorting to create a unique
$(LOCALIZED_C), other targets may benefit from this. Such as: tags,
cscope.out, etc.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit we moved away from using xgettext(1) to both
generate the po/git.pot, and to merge the incrementally generated
po/git.pot+ file as we sourced translations from C, shell and Perl.
Doing it this way, which dates back to my initial
implementation[1][2][3] was conflating two things: With xgettext(1)
the --from-code both controls what encoding is specified in the
po/git.pot's header, and what encoding we allow in source messages.
We don't ever want to allow non-ASCII in *source messages*, and doing
so has hid e.g. a buggy message introduced in
a6226fd772 (submodule--helper: convert the bulk of cmd_add() to C,
2021-08-10) from us, we'd warn about it before, but only when running
"make pot", but the operation would still succeed. Now we'll error out
on it when running "make pot".
Since the preceding Makefile changes made this easy: let's add a "make
check-pot" target with the same prerequisites as the "po/git.pot"
target, but without changing the file "po/git.pot". Running it as part
of the "static-analysis" CI target will ensure that we catch any such
issues in the future. E.g.:
$ make check-pot
XGETTEXT .build/pot/po/builtin/submodule--helper.c.po
xgettext: Non-ASCII string at builtin/submodule--helper.c:3381.
Please specify the source encoding through --from-code.
make: *** [.build/pot/po/builtin/submodule--helper.c.po] Error 1
1. cd5513a716 (i18n: Makefile: "pot" target to extract messages
marked for translation, 2011-02-22)
2. adc3b2b276 (Makefile: add xgettext target for *.sh files,
2011-05-14)
3. 5e9637c629 (i18n: add infrastructure for translating Git with
gettext, 2011-11-18)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before commit fc0fd5b23b (Makefile: help gettext tools to cope with our
custom PRItime format, 2017-07-20), we'd consider source files as-is
with gettext, but because we need to understand PRItime in the same way
that gettext itself understands PRIuMAX, we'd first check if we had a
clean checkout, then munge all of the processed files in-place with
"sed", generate "po/git.pot", and then finally "reset --hard" to undo
our changes.
By generating "pot" snippets in ".build/pot/po" for each source file
and rewriting certain source files with PRItime macros to temporary
files in ".build/pot/po", we can avoid running "make pot" by altering
files in place and doing a "reset --hard" afterwards.
This speed of "make pot" is slower than before on an initial run,
because we run "xgettext" many times (once per source file), but it
can be boosted by parallelization. It is *much* faster for incremental
runs, and will allow us to implement related targets in subsequent
commits.
When the "pot" target was originally added in cd5513a716 (i18n:
Makefile: "pot" target to extract messages marked for translation,
2011-02-22) it behaved like a "normal" target. I.e. we'd skip the
re-generation of the po/git.pot if nothing had to be done.
Then after po/git.pot was checked in in dce37b66fb (l10n: initial
git.pot for 1.7.10 upcoming release, 2012-02-13) the target was broken
until 1f31963e92 (i18n: treat "make pot" as an explicitly-invoked
target, 2014-08-22) when it was made to depend on "FORCE". I.e. the
Makefile's dependency resolution inherently can't handle incremental
building when the target file may be updated by git (or something else
external to "make"). But this case no longer applies, so FORCE is no
longer needed.
That out of the way, the main logic change here is getting rid of the
"reset --hard":
We'll generate intermediate ".build/pot/po/%.po" files from "%", which
is handy to see at a glance what strings (if any) in a given file are
marked for translation:
$ make .build/pot/po/pretty.c.po
[...]
$ cat .build/pot/po/pretty.c.po
#: pretty.c:1051
msgid "unable to parse --pretty format"
msgstr ""
$
For these C source files which contain the PRItime macros, we will
create temporary munged "*.c" files in a tree in ".build/pot/po"
corresponding to our source tree, and have "xgettext" consider those.
The rule needs to be careful to "(cd .build/pot/po && ...)", because
otherwise the comments in the po/git.pot file wouldn't refer to the
correct source locations (they'd be prefixed with ".build/pot/po").
These temporary munged "*.c” files will be removed immediately after
the corresponding po files are generated, because some development tools
cannot ignore the duplicate source files in the ".build" directory
according to the ".gitignore" file, and that may cause trouble.
The output of the generated po/git.pot file is changed in one minor
way: Because we're using msgcat(1) instead of xgettext(1) to
concatenate the output we'll now disambiguate where "TRANSLATORS"
comments come from, in cases where a message is the same in N files,
and either only one has a "TRANSLATORS" comment, or they're
different. E.g. for the "Your edited hunk[...]" message we'll now
apply this change (comment content elided):
+#. #-#-#-#-# add-patch.c.po #-#-#-#-#
#. TRANSLATORS: do not translate [y/n]
[...]
+#. #-#-#-#-# git-add--interactive.perl.po #-#-#-#-#
#. TRANSLATORS: do not translate [y/n]
[...]
#: add-patch.c:1253 git-add--interactive.perl:1244
msgid ""
"Your edited hunk does not apply. Edit again (saying \"no\" discards!) [y/n]? "
msgstr ""
There are six such changes, and they all make the context more
understandable, as msgcat(1) is better at handling these edge cases
than xgettext(1)'s previously used "--join-existing" flag.
But filenames in the above disambiguation lines of extracted-comments
have an extra ".po" extension compared to the filenames at the file
locations. While we could rename the intermediate ".build/pot/po/%.po"
files without the ".po" extension to use more intuitive filenames in
the disambiguation lines of extracted-comments, but that will confuse
developer tools with lots of invalid C or other source files in
".build/pot/po" directory.
The addition of "--omit-header" option for xgettext makes the "pot"
snippets in ".build/pot/po/*.po" smaller. But as we'll see in a
subsequent commit this header behavior has been hiding an
encoding-related bug from us, so let's carry it forward instead of
re-generating it with xgettext(1).
The "po/git.pot" file should have a header entry, because a proper
header entry will increase the speed of creating a new po file using
msginit and set a proper "POT-Creation-Date:" field in the header
entry of a "po/XX.po" file. We use xgettext to generate a separate
header file at ".build/pot/git.header" from "/dev/null", and use this
header to assemble "po/git.pot".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Different users may generate a different message template file
"po/git.pot". This is because the POT file is generated from
"$(LOCALIZED_C)", which is supposed to list all the sources that we
extract the strings to be translated from. But "$(LOCALIZED_C)"
includes "$(C_OBJ)", which only lists the source files used in the
current build for a specific platform and specific compiler
conditions.
Instead of using "$(C_OBJ)", we use "$(FOUND_C_SOURCES)", which lists
all source files we keep track of (or ship in a tarball extract), to
form a stable "LOCALIZED_C". We also add "$(SCALAR_SOURCES)", which
is part of "$(C_OBJ)" but not included in "$(FOUND_C_SOURCES)".
With this update, the newly generated "po/git.pot" will have 30 new
entries coming from the following C source files:
* compat/fsmonitor/fsm-listen-win32.c
* compat/mingw.c
* compat/regex/regcomp.c
* compat/simple-ipc/ipc-win32.c
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will feed xgettext with more C source files and in different order
in subsequent commit. To generate a stable "po/git.pot" regardless of
the number and order of input source files, we sort the c, perl, and
shell source files in groups before feeding them to xgettext.
Ævar suggested that we should not pass the option "--sort-by-file" to
xgettext to sort the translatable strings, as it will mix the three
groups of source files (c, perl and shell) in the file "po/git.pot",
and change the order of translatable strings in the same line of a file.
With this update, the newly generated "po/git.pot" will have the same
entries while in a different order.
With the help of a custom diff driver as shown below,
git config --global diff.gettext-fmt.textconv \
"msgcat --no-location --sort-by-file"
and appending a new entry "*.pot diff=gettext-fmt" to git attributes,
we can see that there are no substantial changes in "po/git.pot".
We won't checkin the newly generated "po/git.pot", because we will
remove it from tree in a later commit.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"make coverage-report" without first running "make coverage" did
not produce any meaningful result, which has been corrected.
* ep/coverage-report-wants-test-to-have-run:
Makefile: add a prerequisite to the coverage-report target
Avoid problems from interaction between malloc_check and address
sanitizer.
* pw/test-malloc-with-sanitize-address:
tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK
Directly invoking make coverage-report as a target results in an error because
its prerequisites are missing,
This patch adds the compile-test prerequisite, which is run only once each time
the compile-report target is invoked. In practice, the developer may decide to
review the coverage-report results without necessarily rerunning for this
coverage-test, if it has already been run.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the address sanitizer checks for a superset of the issues detected
by setting MALLOC_CHECK_ (which tries to detect things like double
frees and off-by-one errors) there is no need to set the latter when
compiling with -fsanitize=address.
This fixes a regression introduced by 131b94a10a ("test-lib.sh: Use
GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34", 2022-03-04)
which causes all the tests to fail with the message
ASan runtime does not come first in initial library list;
you should either link runtime to your application or
manually preload it with LD_PRELOAD.
when git is compiled with SANITIZE=address on systems with glibc >=
2.34. I have tested SANITIZE=leak and SANITIZE=undefined and they do
not suffer from this regression so the fix in this patch should be
sufficient.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
05cd988dce (wrapper: add a helper to generate numbers from a CSPRNG,
2022-01-17), configure openssl as the source for entropy in NON-STOP
but doesn't add the needed header or link options.
Since the only system that is configured to use openssl as a source
of entropy is NON-STOP, add the header unconditionally, and -lcrypto
to the list of external libraries.
An additional change is required to make sure a NO_OPENSSL=1 build
will be able to work as well (tested on Linux with a modified value
of CSPRNG_METHOD = openssl), and the more complex logic that allows
for compatibility with APPLE_COMMON_CRYPTO or allowing for simpler
ways to link (without libssl) has been punted for now.
Reported-by: Randall Becker <rsbecker@nexbridge.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
Replace core.fsyncObjectFiles with two new configuration variables,
core.fsync and core.fsyncMethod.
* ns/core-fsyncmethod:
core.fsync: documentation and user-friendly aggregate options
core.fsync: new option to harden the index
core.fsync: add configuration parsing
core.fsync: introduce granular fsync control infrastructure
core.fsyncmethod: add writeout-only mode
wrapper: make inclusion of Windows csprng header tightly scoped
Create an IPC client to send query and flush commands to the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stub in empty filesystem listener backend for fsmonitor--daemon on Windows.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a built-in file system monitoring daemon that can be used by
the existing `fsmonitor` feature (protocol API and index extension)
to improve the performance of various Git commands, such as `status`.
The `fsmonitor--daemon` feature builds upon the `Simple IPC` API and
provides an alternative to hook access to existing fsmonitors such
as `watchman`.
This commit merely adds the new command without any functionality.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move fsmonitor config settings to a new and opaque
`struct fsmonitor_settings` structure. Add a lazily-loaded pointer
to this into `struct repo_settings`
Create an `enum fsmonitor_mode` type in `struct fsmonitor_settings` to
represent the state of fsmonitor. This lets us represent which, if
any, fsmonitor provider (hook or IPC) is enabled.
Create `fsm_settings__get_*()` getters to lazily look up fsmonitor-
related config settings.
Get rid of the `core_fsmonitor` global variable. Move the code to
lookup the existing `core.fsmonitor` config value into the fsmonitor
settings.
Create a hook pathname variable in `struct fsmonitor-settings` and
only set it when in hook mode.
Extend the definition of `core.fsmonitor` to be either a boolean
or a hook pathname. When true, the builtin FSMonitor is used.
When false or unset, no FSMonitor (neither builtin nor hook) is
used.
The existing `core_fsmonitor` global variable was used to store the
pathname to the fsmonitor hook *and* it was used as a boolean to see
if fsmonitor was enabled. This dual usage and global visibility leads
to confusion when we add the IPC-based provider. So lets hide the
details in fsmonitor-settings.c and let it decide which provider to
use in the case of multiple settings. This avoids cluttering up
repo-settings.c with these private details.
A future commit in builtin-fsmonitor series will add the ability to
disqualify worktrees for various reasons, such as being mounted from a
remote volume, where fsmonitor should not be started. Having the
config settings hidden in fsmonitor-settings.c allows such worktree
restrictions to override the config values used.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create fsmonitor_ipc__*() client routines to spawn the built-in file
system monitor daemon and send it an IPC request using the `Simple
IPC` API.
Stub in empty fsmonitor_ipc__*() functions for unsupported platforms.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash drop" is reimplemented as an internal call to
reflog_delete() function, instead of invoking "git reflog delete"
via run_command() API.
* jc/stash-drop:
stash: call reflog_delete() in reflog.c
reflog: libify delete reflog function and helpers
stash: add tests to ensure reflog --rewrite --updatref behavior
This commit introduces the `core.fsyncMethod` configuration
knob, which can currently be set to `fsync` or `writeout-only`.
The new writeout-only mode attempts to tell the operating system to
flush its in-memory page cache to the storage hardware without issuing a
CACHE_FLUSH command to the storage controller.
Writeout-only fsync is significantly faster than a vanilla fsync on
common hardware, since data is written to a disk-side cache rather than
all the way to a durable medium. Later changes in this patch series will
take advantage of this primitive to implement batching of hardware
flushes.
When git_fsync is called with FSYNC_WRITEOUT_ONLY, it may fail and the
caller is expected to do an ordinary fsync as needed.
On Apple platforms, the fsync system call does not issue a CACHE_FLUSH
directive to the storage controller. This change updates fsync to do
fcntl(F_FULLFSYNC) to make fsync actually durable. We maintain parity
with existing behavior on Apple platforms by setting the default value
of the new core.fsyncMethod option.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a template to do the "mkdir -p" of $(@D) (the parent dir of $@)
for us, and use it for the "make lint-docs" targets I added in
8650c6298c (doc lint: make "lint-docs" non-.PHONY, 2021-10-15).
As seen in 4c64fb5aad (Documentation/Makefile: fix lint-docs mkdir
dependency, 2021-10-26) maintaining these manual lists of parent
directory dependencies is fragile, in addition to being obviously
verbose.
I used this pattern at the time because I couldn't find another method
than "order-only" prerequisites to avoid doing a "mkdir -p $(@D)" for
every file being created, which as noted in [1] would be significantly
slower.
But as it turns out we can use this neat trick of only doing a "mkdir
-p" if the $(wildcard) macro tells us the path doesn't exist. A re-run
of a performance test similar to that noted downthread of [1] in [2]
shows that this is faster, in addition to being less verbose and more
reliable (this uses my "git-hyperfine" thin wrapper for "hyperfine"[3]):
$ git -c hyperfine.hook.setup= hyperfine -L rev HEAD~1,HEAD~0 -s 'make -C Documentation lint-docs' -p 'rm -rf Documentation/.build' 'make -C Documentation -j1 lint-docs'
Benchmark 1: make -C Documentation -j1 lint-docs' in 'HEAD~1
Time (mean ± σ): 2.914 s ± 0.062 s [User: 2.449 s, System: 0.489 s]
Range (min … max): 2.834 s … 3.020 s 10 runs
Benchmark 2: make -C Documentation -j1 lint-docs' in 'HEAD~0
Time (mean ± σ): 2.315 s ± 0.062 s [User: 1.950 s, System: 0.386 s]
Range (min … max): 2.229 s … 2.397 s 10 runs
Summary
'make -C Documentation -j1 lint-docs' in 'HEAD~0' ran
1.26 ± 0.04 times faster than 'make -C Documentation -j1 lint-docs' in 'HEAD~1'
So let's use that pattern both for the "lint-docs" target, and a few
miscellaneous other targets.
This method of creating parent directories is explicitly racy in that
we don't know if we're going to say always create a "foo" followed by
a "foo/bar" under parallelism, or skip the "foo" because we created
"foo/bar" first. In this case it doesn't matter for anything except
that we aren't guaranteed to get the same number of rules firing when
running make in parallel.
1. https://lore.kernel.org/git/211028.861r45y3pt.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/211028.86o879vvtp.gmgdl@evledraar.gmail.com/
3. https://gitlab.com/avar/git-hyperfine/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $(QUIET) variables we define are largely duplicated between our
various Makefiles, let's define them in the new "shared.mak" instead.
Since we're not using the environment to pass these around we don't
need to export the "QUIET_GEN" and "QUIET_BUILT_IN" variables
anymore. The "QUIET_GEN" variable is used in "git-gui/Makefile" and
"gitweb/Makefile", but they've got their own definition for those. The
"QUIET_BUILT_IN" variable is only used in the top-level "Makefile". We
still need to export the "V" variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move these variables over to the shared.mak, we'll make use of them in
a subsequent commit.
Note that there's reason for these to be "simply expanded variables",
i.e. to use ":=" assignments instead of lazily expanded "="
assignments. We could use "=", but let's leave this as-is for now for
ease of review.
See 425ca6710b (Makefile: allow combining UBSan with other
sanitizers, 2017-07-15) for the commit that introduced these.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added in 30248886ce (Makefile: disable default implicit
rules, 2010-01-26), let's move it to the top of "shared.mak" so it'll
apply to all our Makefiles.
This doesn't benefit the main Makefile at all, since it already had
the rule, but since we're including shared.mak in other Makefiles
starts to benefit them. E.g. running the 'man" target is now faster:
$ git -c hyperfine.hook.setup= hyperfine -L rev HEAD~1,HEAD~0 -s 'make -C Documentation man' 'make -C Documentation -j1 man'
Benchmark 1: make -C Documentation -j1 man' in 'HEAD~1
Time (mean ± σ): 121.7 ms ± 8.8 ms [User: 105.8 ms, System: 18.6 ms]
Range (min … max): 112.8 ms … 148.4 ms 26 runs
Benchmark 2: make -C Documentation -j1 man' in 'HEAD~0
Time (mean ± σ): 97.5 ms ± 8.0 ms [User: 80.1 ms, System: 20.1 ms]
Range (min … max): 89.8 ms … 111.8 ms 32 runs
Summary
'make -C Documentation -j1 man' in 'HEAD~0' ran
1.25 ± 0.14 times faster than 'make -C Documentation -j1 man' in 'HEAD~1'
The reason for that can be seen when comparing that run with
"--debug=a". Without this change making a target like "git-status.1"
will cause "make" to consider not only "git-status.txt", but
"git-status.txt.o", as well as numerous other implicit suffixes such
as ".c", ".cc", ".cpp" etc. See [1] for a more detailed before/after
example.
So this is causing us to omit a bunch of work we didn't need to
do. For making "git-status.1" the "--debug=a" output is reduced from
~140k lines to ~6k.
1. https://lore.kernel.org/git/220222.86bkyz875k.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Combine the definitions of $(FIND_SOURCE_FILES) and $(LIB_H) to speed
up the Makefile, as these are the two main expensive $(shell) commands
that we execute unconditionally.
When see what was in $(FOUND_SOURCE_FILES) that wasn't in $(LIB_H) via
the ad-hoc test of:
$(error $(filter-out $(LIB_H),$(filter %.h,$(ALL_SOURCE_FILES))))
$(error $(filter-out $(ALL_SOURCE_FILES),$(filter %.h,$(LIB_H))))
We'll get, respectively:
Makefile:850: *** t/helper/test-tool.h. Stop.
Makefile:850: *** . Stop.
I.e. we only had a discrepancy when it came to
t/helper/test-tool.h. In terms of correctness this was broken before,
but now works:
$ make t/helper/test-tool.hco
HDR t/helper/test-tool.h
This speeds things up a lot:
$ git -c hyperfine.hook.setup= hyperfine -L rev HEAD~1,HEAD~0 -s 'make NO_TCLTK=Y' 'make -j1 NO_TCLTK=Y' --warmup 10 -M 10
Benchmark 1: make -j1 NO_TCLTK=Y' in 'HEAD~1
Time (mean ± σ): 159.9 ms ± 6.8 ms [User: 137.2 ms, System: 28.0 ms]
Range (min … max): 154.6 ms … 175.9 ms 10 runs
Benchmark 2: make -j1 NO_TCLTK=Y' in 'HEAD~0
Time (mean ± σ): 100.0 ms ± 1.3 ms [User: 84.2 ms, System: 20.2 ms]
Range (min … max): 98.8 ms … 102.8 ms 10 runs
Summary
'make -j1 NO_TCLTK=Y' in 'HEAD~0' ran
1.60 ± 0.07 times faster than 'make -j1 NO_TCLTK=Y' in 'HEAD~1'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have various behavior that's shared across our Makefiles, or that
really should be (e.g. via defined templates). Let's create a
top-level "shared.mak" to house those sorts of things, and start by
adding the ".DELETE_ON_ERROR" flag to it.
See my own 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) and db10fc6c09 (doc: simplify Makefile using
.DELETE_ON_ERROR, 2021-05-21) for the addition and use of the
".DELETE_ON_ERROR" flag.
I.e. this changes the behavior of existing rules in the altered
Makefiles (except "Makefile" & "Documentation/Makefile"). I'm
confident that this is safe having read the relevant rules in those
Makfiles, and as the GNU make manual notes that it isn't the default
behavior is out of an abundance of backwards compatibility
caution. From edition 0.75 of its manual, covering GNU make 4.3:
[Enabling '.DELETE_ON_ERROR' is] almost always what you want
'make' to do, but it is not historical practice; so for
compatibility, you must explicitly request it.
This doesn't introduce a bug by e.g. having this
".DELETE_ON_ERROR" flag only apply to this new shared.mak, Makefiles
have no such scoping semantics.
It does increase the danger that any Makefile without an explicit "The
default target of this Makefile is..." snippet to define the default
target as "all" could have its default rule changed if our new
shared.mak ever defines a "real" rule. In subsequent commits we'll be
careful not to do that, and such breakage would be obvious e.g. in the
case of "make -C t".
We might want to make that less fragile still (e.g. by using
".DEFAULT_GOAL" as noted in the preceding commit), but for now let's
simply include "shared.mak" without adding that boilerplate to all the
Makefiles that don't have it already. Most of those are already
exposed to that potential caveat e.g. due to including "config.mak*".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently stash shells out to reflog in order to delete refs. In an
effort to reduce how much we shell out to a subprocess, libify the
functionality that stash needs into reflog.c.
Add a reflog_delete function that is pretty much the logic in the while
loop in builtin/reflog.c cmd_reflog_delete(). This is a function that
builtin/reflog.c and builtin/stash.c can both call.
Also move functions needed by reflog_delete and export them.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build procedure has been taught to notice older version of zlib
and enable our replacement uncompress2() automatically.
* ab/auto-detect-zlib-compress2:
compat: auto-detect if zlib has uncompress2()
Pick a better random number generator and use it when we prepare
temporary filenames.
* bc/csprng-mktemps:
wrapper: use a CSPRNG to generate random file names
wrapper: add a helper to generate numbers from a CSPRNG
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
We have a copy of uncompress2() implementation in compat/ so that we
can build with an older version of zlib that lack the function, and
the build procedure selects if it is used via the NO_UNCOMPRESS2
$(MAKE) variable. This is yet another "annoying" knob the porters
need to tweak on platforms that are not common enough to have the
default set in the config.mak.uname file.
Attempt to instead ask the system header <zlib.h> to decide if we
need the compatibility implementation. This is a deviation from the
way we have been handling the "compatiblity" features so far, and if
it can be done cleanly enough, it could work as a model for features
that need compatibility definition we discover in the future. With
that goal in mind, avoid expedient but ugly hacks, like shoving the
code that is conditionally compiled into an unrelated .c file, which
may not work in future cases---instead, take an approach that uses a
file that is independently compiled and stands on its own.
Compile and link compat/zlib-uncompress2.c file unconditionally, but
conditionally hide the implementation behind #if/#endif when zlib
version is 1.2.9 or newer, and unconditionally archive the resulting
object file in the libgit.a to be picked up by the linker.
There are a few things to note in the shape of the code base after
this change:
- We no longer use NO_UNCOMPRESS2 knob; if the system header
<zlib.h> claims a version that is more cent than the library
actually is, this would break, but it is easy to add it back when
we find such a system.
- The object file compat/zlib-uncompress2.o is always compiled and
archived in libgit.a, just like a few other compat/ object files
already are.
- The inclusion of <zlib.h> is done in <git-compat-util.h>; we used
to do so from <cache.h> which includes <git-compat-util.h> as the
first thing it does, so from the *.c codes, there is no practical
change.
- Until objects in libgit.a that is already used gains a reference
to the function, the reftable code will be the only one that
wants it, so libgit.a on the linker command line needs to appear
once more at the end to satisify the mutual dependency.
- Beat found a trick used by OpenSSL to avoid making the
conditionally-compiled object truly empty (apparently because
they had to deal with compilers that do not want to see an
effectively empty input file). Our compat/zlib-uncompress2.c
file borrows the same trick for portabilty.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many situations in which having access to a cryptographically
secure pseudorandom number generator (CSPRNG) is helpful. In the
future, we'll encounter one of these when dealing with temporary files.
To make this possible, let's add a function which reads from a system
CSPRNG and returns some bytes.
We know that all systems will have such an interface. A CSPRNG is
required for a secure TLS or SSH implementation and a Git implementation
which provided neither would be of little practical use. In addition,
POSIX is set to standardize getentropy(2) in the next version, so in the
(potentially distant) future we can rely on that.
For systems which lack one of the other interfaces, we provide the
ability to use OpenSSL's CSPRNG. OpenSSL is highly portable and
functions on practically every known OS, and we know it will have access
to some source of cryptographically secure randomness. We also provide
support for the arc4random in libbsd for folks who would prefer to use
that.
Because this is a security sensitive interface, we take some
precautions. We either succeed by filling the buffer completely as we
requested, or we fail. We don't return partial data because the caller
will almost never find that to be a useful behavior.
Specify a makefile knob which users can use to specify one or more
suitable CSPRNGs, and turn the multiple string options into a set of
defines, since we cannot match on strings in the preprocessor. We allow
multiple options to make the job of handling this in autoconf easier.
The order of options is important here. On systems with arc4random,
which is most of the BSDs, we use that, since, except on MirBSD and
macOS, it uses ChaCha20, which is extremely fast, and sits entirely in
userspace, avoiding a system call. We then prefer getrandom over
getentropy, because the former has been available longer on Linux, and
then OpenSSL. Finally, if none of those are available, we use
/dev/urandom, because most Unix-like operating systems provide that API.
We prefer options that don't involve device files when possible because
those work in some restricted environments where device files may not be
available.
Set the configuration variables appropriately for Linux and the BSDs,
including macOS, as well as Windows and NonStop. We specifically only
consider versions which receive publicly available security support
here. For the same reason, we don't specify getrandom(2) on Linux,
because CentOS 7 doesn't support it in glibc (although its kernel does)
and we don't want to resort to making syscalls.
Finally, add a test helper to allow this to be tested by hand and in
tests. We don't add any tests, since invoking the CSPRNG is not likely
to produce interesting, reproducible results.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to enable hooks to be run as an external process, by a
standalone Git command, or by tools which wrap Git, provide an external
means to run all configured hook commands for a given hook event.
Most of our hooks require more complex functionality than this, but
let's start with the bare minimum required to support our simplest
hooks.
In terms of implementation the usage_with_options() and "goto usage"
pattern here mirrors that of
builtin/{commit-graph,multi-pack-index}.c.
Some of the implementation here, such as a function being named
run_hooks_opt() when it's tasked with running one hook, to using the
run_processes_parallel_tr2() API to run with jobs=1 is somewhere
between a bit odd and and an overkill for the current features of this
"hook run" command and the hook.[ch] API.
This code will eventually be able to run multiple hooks declared in
config in parallel, by starting out with these names and APIs we
reduce the later churn of renaming functions, switching from the
run_command() to run_processes_parallel_tr2() API etc.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the --statistics flag that I added in 5e9637c629 (i18n: add
infrastructure for translating Git with gettext, 2011-11-18). Our
Makefile output is good about reducing verbosity by default, except in
this case:
$ rm -rf po/build/locale/e*; time make -j $(nproc) all
SUBDIR templates
MKDIR -p po/build/locale/el/LC_MESSAGES
MSGFMT po/build/locale/el/LC_MESSAGES/git.mo
MKDIR -p po/build/locale/es/LC_MESSAGES
MSGFMT po/build/locale/es/LC_MESSAGES/git.mo
1038 translated messages, 3325 untranslated messages.
5230 translated messages.
I didn't have any good reason for using --statistics at the time other
than ad-hoc eyeballing of the output. We don't need to spew out
exactly how many messages we've got translated every time. Now we'll
instead emit:
$ rm -rf po/build/locale/e*; time make -j $(nproc) all
SUBDIR templates
MKDIR -p po/build/locale/el/LC_MESSAGES
MSGFMT po/build/locale/el/LC_MESSAGES/git.mo
MKDIR -p po/build/locale/es/LC_MESSAGES
MSGFMT po/build/locale/es/LC_MESSAGES/git.mo
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove -DPAGER_ENV from the BASIC_CFLAGS and instead have it passed
via the EXTRA_CPPFLAGS passed when compiling pager.c.
This doesn't change anything except to make it clear that only pager.c
needs this, as it's the only user of this define. See
995bc22d7f (pager: move pager-specific setup into the build,
2016-08-04) for the commit that originally added this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an issue in my cfe853e66b (hook-list.h: add a generated list of
hooks, like config-list.h, 2021-09-26), the builtin/help.c was
inadvertently made to depend on hook-list.h, but it's used by
builtin/bugreport.c.
The hook.c also does not depend on hook-list.h. It did in an earlier
version of the greater series cfe853e66b was extracted from, but not
anymore. We might end up needing that line again, but let's remove it
for now.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add pieces from "scalar" to contrib/.
* js/scalar:
scalar: implement the `version` command
scalar: implement the `delete` command
scalar: teach 'reconfigure' to optionally handle all registered enlistments
scalar: allow reconfiguring an existing enlistment
scalar: implement the `run` command
scalar: teach 'clone' to support the --single-branch option
scalar: implement the `clone` subcommand
scalar: implement 'scalar list'
scalar: let 'unregister' handle a deleted enlistment directory gracefully
scalar: 'unregister' stops background maintenance
scalar: 'register' sets recommended config and starts maintenance
scalar: create test infrastructure
scalar: start documenting the command
scalar: create a rudimentary executable
scalar: add a README with a roadmap
Weather balloon to find compilers that do not grok variable
declaration in the for() loop.
* jc/c99-var-decl-in-for-loop:
revision: use C99 declaration of variable in for() loop
The "reftable" backend for the refs API, without integrating into
the refs subsystem, has been added.
* hn/reftable:
Add "test-tool dump-reftable" command.
reftable: add dump utility
reftable: implement stack, a mutable database of reftable files.
reftable: implement refname validation
reftable: add merged table view
reftable: add a heap-based priority queue for reftable records
reftable: reftable file level tests
reftable: read reftable files
reftable: generic interface to tables
reftable: write reftable files
reftable: a generic binary tree implementation
reftable: reading/writing blocks
Provide zlib's uncompress2 from compat/zlib-compat.c
reftable: (de)serialization for the polymorphic record type.
reftable: add blocksource, an abstraction for random access reads
reftable: utility functions
reftable: add error related functionality
reftable: add LICENSE
hash.h: provide constants for the hash IDs
