Currently, only interactive rebase remembers the value of the '-v'
flag from the initial invocation. Make non-interactive rebase also
remember it.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the code for writing the state to rebase-apply/ or
rebase-merge/ when a rebase is initiated. This will make it easier to
later make both interactive and non-interactive rebase remember the
options used.
Note that non-interactive rebase stores the sha1 of the original head
in a file called orig-head, while interactive rebase stores it in a
file called head. Change this by writing to orig-head in both
cases. When reading, try to read from orig-head. If that fails, read
from head instead. This protects users who upgraded git while they had
an ongoing interactive rebase, while still making it possible to
remove the code that reads from head at some point in the future.
Helped-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the common parts of the handling of the sub commands
'--continue', '--skip' and '--abort'. The '--abort' handling can
handled completely in git-rebase.sh.
After this refactoring, the calls to git-rebase--am.sh,
git-rebase--merge.sh and git-rebase--interactive.sh will be better
aligned. There will only be one call to interactive rebase that will
shortcut the very last part of git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make it possible to later remove the handling of --abort from
git-rebase--interactive.sh, align the implementation in git-rebase.sh
with the former by making it a bit more verbose.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename variables HEAD and OLDHEAD to orig_head and HEADNAME to
head_name, which are the names used in git-rebase.sh. This prepares
for factoring out of the code that persists these variables during the
entire rebase process. Using the same variable names to mean the same
thing in both files also makes the code easier to read.
While at it, also remove the DOTEST variable and use the state_dir
variable that was inherited from git-rebase.sh instead.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebase stops due to conflict, interactive rebase currently
displays a different hint to the user than non-interactive rebase
does. Use the same message for both types of rebase.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the call to the pre-rebase hook from
git-rebase--interactive.sh and rely on the call in
git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the check for clean work tree from git-rebase--interactive.sh and
rely on the check in git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the parsing and validation of references (onto, upstream, branch)
from git-rebase--interactive.sh and rely on the information exported from
git-rebase.sh.
By using the parsing of the --onto parameter in git-rebase.sh, this
improves the error message when the parameter is invalid.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder validation steps in preparation for the validation to be factored
out from git-rebase--interactive.sh into git-rebase.sh.
The main functional difference is that the pre-rebase hook will no longer
be run if the work tree is dirty.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove directory checks from git-rebase--interactive.sh that are done in
git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the command line processing in git-rebase--interactive.sh
to git-rebase.sh. Store the options in variables in git-rebase.sh and
then source git-rebase--interactive.sh.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure to interpret variables with the same name in the same way in
git-rebase.sh and git-rebase--interactive.sh. This will make it easier
to factor out code from git-rebase.sh to git-rebase--interactive and
export the variables.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase--interactive.sh will soon be sourced from
git-rebase.sh. Align the names of variables used in these scripts to
prepare for that.
Some names in git-rebase--interactive.sh, such as "author_script" and
"amend", are currently used in their upper case form to refer to a
file and in their lower case form to refer to something else. In these
cases, change the name of the existing lower case variable and
downcase the name of the variable that refers to the file.
Currently, git-rebase.sh uses mostly lower case variable names, while
git-rebase--interactive.sh uses mostly upper case variable names. For
consistency, downcase all variables, not just the ones that will be
shared between the two script files.
Helped-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To later be able to use the command line processing in git-rebase.sh
for both interactive and non-interactive rebases, move anything that
is specific to non-interactive rebase outside of the parsing
loop. Keep only parsing and validation of command line options in the
loop.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
The hints in the current "instruction sheet" template look like so:
# Rebase 3f14246..a1d7e01 onto 3f14246
#
# Commands:
# p, pick = use commit
# r, reword = use commit, but edit the commit message
# e, edit = use commit, but stop for amending
# s, squash = use commit, but meld into previous commit
# f, fixup = like "squash", but discard this commit's log message
# x <cmd>, exec <cmd> = Run a shell command <cmd>, and stop if it fails
#
# If you remove a line here THAT COMMIT WILL BE LOST.
# However, if you remove everything, the rebase will be aborted.
#
This does not make it clear that the format of each line is
<insn> <commit id> <explanatory text that will be printed>
but the reader will probably infer that from the automatically
generated pick examples above it.
What about the "exec" instruction? By analogy, I might imagine that
the format of that line is "exec <command> <explanatory text>", and
the "x <cmd>" hint does not address that question (at first I read it
as taking an argument <cmd> that is the name of a shell). Meanwhile,
the mention of <cmd> makes the hints harder to scan as a table.
So remove the <cmd> and add some words to remind the reader that
"exec" runs a command named by the rest of the line. To make room, it
is left to the manpage to explain that that command is run using
$SHELL and that nonzero status from that command will pause the
rebase.
Wording from Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a ref/pathname conflict, checkout will
already do the right thing and checkout the ref. However,
for a non-existant ref, this has two advantages:
1. If a file with that pathname exists, rebase will
refresh the file from the index and then rebase the
current branch instead of producing an error.
2. If no such file exists, the error message using an
explicit "--" is better:
# before
$ git rebase -i origin bogus
error: pathspec 'bogus' did not match any file(s) known to git.
Could not checkout bogus
# after
$ git rebase -i origin bogus
fatal: invalid reference: bogus
Could not checkout bogus
The problems seem to be trigger-able only through "git
rebase -i", as regular git-rebase checks the validity of the
branch parameter as a ref very early on. However, it doesn't
hurt to be defensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interactive rebase allows the '--verify' option to be passed, but it will
be ignored. Implement proper support for the option for both interactive
and non-interactive rebase by making it override any previous
'--no-verify'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support lines of the form "fixup! 7a235b" that specify an exact commit
in addition to the normal "squash! Old commit message" form.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behvaior of --autosquash can duplicate fixup!/squash! lines
if they match multiple commits, and it can also apply them to commits
that come after them in the todo list. Even more oddly, a commit that
looks like "fixup! fixup!" will match itself and be duplicated in the
todo list.
Change the todo list rearranging to mark all commits as used as soon
as they are emitted, and to avoid emitting a fixup/squash commit if the
commit has already been marked as used.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although Git interally has the facility to differentiate between
porcelain and plubmbing commands and appropriately print errors,
several shell scripts invoke plubming commands triggering cryptic
plumbing errors to be displayed on a porcelain interface. This patch
replaces the "needs update" message in git-pull and git-rebase, when
`git update-index` is run, with a more friendly message.
Reported-by: Joshua Jensen <jjensen@workspacewhiz.com>
Reported-by: Thore Husfeldt <thore.husfeldt@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of cut do not cope well with lines that do not end in
an LF. In this case, we can completely avoid cut by using the
${var%% *} parameter expansion (suggested by Brandon Casey).
I found this problem when t3404's "avoid unnecessary reset" failed
due to the "rebase -i" not avoiding updating the tested timestamp.
On a Mac OS X 10.4.11 system:
% printf '%s' 'foo bar' | /usr/bin/cut -d ' ' -f 1
cut: stdin: Illegal byte sequence
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/cherry-revert-message-clean-up:
tests: fix syntax error in "Use advise() for hints" test
cherry-pick/revert: Use advise() for hints
cherry-pick/revert: Use error() for failure message
Introduce advise() to print hints
Eliminate “Finished cherry-pick/revert” message
t3508: add check_head_differs_from() helper function and use it
revert: improve success message by adding abbreviated commit sha1
revert: don't print "Finished one cherry-pick." if commit failed
revert: refactor commit code into a new run_git_commit() function
revert: report success when using option --strategy
* mm/rebase-i-exec:
git-rebase--interactive.sh: use printf instead of echo to print commit message
git-rebase--interactive.sh: rework skip_unnecessary_picks
test-lib: user-friendly alternatives to test [-d|-f|-e]
rebase -i: add exec command to launch a shell command
Conflicts:
git-rebase--interactive.sh
t/t3404-rebase-interactive.sh
When cherry-pick fails after picking a large series of commits, it can
be hard to pick out the error message and advice. Prefix the advice
with “hint: ” to help.
Before:
error: could not apply 7ab78c9... foo
After resolving the conflicts,
mark the corrected paths with 'git add <paths>' or 'git rm <paths>'
and commit the result with:
git commit -c 7ab78c9a7898b87127365478431289cb98f8d98f
After:
error: could not apply 7ab78c9... foo
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit -c 7ab78c9'
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Encouraged-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the echo statements that operate on $rest with printf's to restore
what was lost from 938791cd. This avoids any mangling that XSI-conformant
echo's may introduce.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cd035b1c introduced the exec command to interactive rebase. In
doing so, it modified the way that skip_unnecessary_picks iterates through
the list of rebase commands so that it avoided collapsing multiple spaces
into a single space. This is necessary for example if the argument to the
exec command contains a path with multiple spaces in it.
The way it did this was by reading each line of rebase commands into a
single variable, and then breaking the individual components out using
echo, sed, and cut. It used the individual broken-out components for
decision making, and was still able to write the original line to the
output file from the variable it had saved it in. But, since we only
really need to look at anything other than the first element of the line
when a 'pick' command is encountered, and even that is only necessary when
we are still searching for "unnecessary" picks, and since newer rebase
commands like 'exec' may not even require a sha1 field, let's make our read
statement parse its input into a "command" variable, and a "rest" variable,
and then only break out the sha1 from $rest, and call git-rev-parse, when
absolutely necessary.
I think this future proofs this subroutine, avoids calling git-rev-parse
unnecessarily, and possibly with bogus arguments, and still accomplishes
the goal of not mangling the $rest of the rebase command.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The typical usage pattern would be to run a test (or simply a compilation
command) at given points in history.
The shell command is ran (from the worktree root), and the rebase is
stopped when the command fails, to give the user an opportunity to fix
the problem before continuing with "git rebase --continue".
This needs a little rework of skip_unnecessary_picks, which wasn't robust
enough to deal with lines like
exec >"file name with many spaces"
in the todolist. The new version extracts command, sha1 and rest from
each line, but outputs the line itself verbatim to avoid changing the
whitespace layout.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems with an echo which defaults to the XSI-conformant behavior
(Solaris, or others using Ksh), echo will interpret certain backslashed
characters as control sequences. This can cause a problem for interactive
rebase when it is used to rebase commits whose commit "subject" (the first
line) contains any of these backslashed sequences. In this case, echo will
substitute the control sequence for the backslashed characters and either
the rebased commit message will differ from the original, or the rebase
process will fail. Neither is desirable.
So work around this issue by replacing the echo statements used to print
out portions of the commit message, with printf.
Also, add a test to test for this breakage.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use this feature regularly you can now enable it by default. In
case the user wants to override this config on the commandline
--no-autosquash can be used to force disabling.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Case arms should align with "case" and "esac".
Do not cat a file into a pipeline; just make the downstream command
read from the file.
Having a while statement as a downstream of a pipe is fine, but
the loop should begin on its own line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Untracked content in the working tree may prevent rebase -i from checking out
the new base onto which it wants to replay commits, if the new base commit
includes files at those (now untracked) paths. Currently, rebase -i dies
uncleanly in this situation, updating ORIG_HEAD and leaving a useless
.git/rebase-merge directory, with which the user can do nothing useful except
rebase --abort. Make rebase -i abort the procedure itself instead, as
non-interactive rebase already does, and add a test for this behavior.
Signed-off-by: Ian Ward Comfort <icomfort@stanford.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you do a "rebase -i" and don't change any commits,
nothing is rewritten, and we have no REWRITTEN_LIST. The
shell prints out an ugly message:
$ GIT_EDITOR=true git rebase -i HEAD^
/path/to/git-rebase--interactive: 1: cannot open
/path/to/repo/.git/rebase-merge/rewritten-list: No such file
Successfully rebased and updated refs/heads/master.
We can fix it by not running "notes copy" at all if nothing
was rewritten.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/cherry-pick-ff:
revert: fix tiny memory leak in cherry-pick --ff
rebase -i: use new --ff cherry-pick option
Documentation: describe new cherry-pick --ff option
cherry-pick: add tests for new --ff option
revert: add --ff option to allow fast forward when cherry-picking
builtin/merge: make checkout_fast_forward() non static
parse-options: add parse_options_concat() to concat options
The post-rewrite support, in the form of the call to
'record_in_rewritten', was hidden in the arm where we have to record a
new commit for the user. This meant that it was never invoked in the
case where the user has already amended the commit by herself.
[The test is designed to exercise both arms of the 'if' in question.]
Furthermore, recording the stopped-sha (the SHA1 of the commit before
the editing) suffered from a cut&paste error from die_with_patch and
used the wrong variable, hence it never recorded anything.
Noticed by Junio.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
For git-rebase.sh, --no-ff is a synonym for --force-rebase.
For git-rebase--interactive.sh, --no-ff cherry-picks all the commits in
the rebased branch, instead of fast-forwarding over any unchanged commits.
--no-ff offers an alternative way to deal with reverted merges. Instead of
"reverting the revert" you can use "rebase --no-ff" to recreate the branch
with entirely new commits (they're new because at the very least the
committer time is different). This obviates the need to revert the
reversion, as you can re-merge the new topic branch directly. Added an
addendum to revert-a-faulty-merge.txt describing the situation and how to
use --no-ff to handle it.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rebase allows you to specify a non-branch commit-ish as the "branch"
argument, which leaves HEAD detached when it's finished. This is
occasionally useful, and this patch brings the same functionality to git
rebase --interactive.
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luckily, all the support already happens to be there.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from the same issue that rebase also has (remembering the
original commit across a conflict resolution), rebase -i brings an
extra twist: We need to defer writing the rewritten list in the case
of {squash,fixup} because their rewritten result should be the last
commit in the squashed group.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rough structure of run_rewrite_hook() comes from
run_receive_hook() in receive-pack.
We introduce a --no-post-rewrite option and use it to avoid the hook
when called from git-rebase -i 'edit'. The next patch will add full
support in git-rebase, and we only want to invoke the hook once.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bash (4.0.24) on OpenBSD 4.6 refuses to run this snippet:
$ cat gomi.sh
#!/bin/sh
one="/var/tmp/1 1"
rm -f /var/tmp/1 "/var/tmp/1 1"
echo hello >$one
$ sh gomi.sh; ls /var/tmp/1*
/var/tmp/1 1
$ bash gomi.sh; ls /var/tmp/1*
gomi.sh: line 4: $one: ambiguous redirect
ls: /var/tmp/1*: No such file or directory
Every competent shell programmer knows that a <$word in redirection is not
subject to field splitting (POSIX.1 "2.7 Redirection" explicitly lists the
kind of expansion performed: "... the word that follows the redirection
operator shall be subjected to ...", and "Field Splitting" is not among
them).
Some clueless folks apparently decided that users need to be protected in
the name of "security", however.
Output from "git grep -e '> *\$' -- '*.sh'" indicates that rebase-i
suffers from this bogus "safety". Work it around by surrounding the
variable reference with a dq pair.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a dollar sign in double quotes isn't portable. Escape them with
a backslash or replace the double quotes with single quotes.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no point doing self-assignments of these variables. Instead,
just export them to the environment, but do so in a sub-shell, because
VAR1=VAL1 VAR2=VAL2 ... command arg1 arg2...
does not mark the variables exported if command that is run
is a shell function, according to POSIX.1.
The callers of do_with_author do not rely on seeing the effect of any
shell variable assignments that may happen inside what was called through
this shell function (currently "output" is the only one), so running it in
the subshell doesn't have an adverse semantic effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/rebase-fixup:
rebase -i: Retain user-edited commit messages after squash/fixup conflicts
t3404: Set up more of the test repo in the "setup" step
rebase -i: For fixup commands without squashes, do not start editor
rebase -i: Change function make_squash_message into update_squash_message
rebase -i: Extract function do_with_author
rebase -i: Handle the author script all in one place in do_next
rebase -i: Extract a function "commit_message"
rebase -i: Simplify commit counting for generated commit messages
rebase -i: Improve consistency of commit count in generated commit messages
t3404: Test the commit count in commit messages generated by "rebase -i"
rebase -i: Introduce a constant AMEND
rebase -i: Introduce a constant AUTHOR_SCRIPT
rebase -i: Document how temporary files are used
rebase -i: Use symbolic constant $MSG consistently
rebase -i: Use "test -n" instead of "test ! -z"
rebase -i: Inline expression
rebase -i: Remove dead code
rebase -i: Make the condition for an "if" more transparent
* 'mh/rebase-fixup' (early part):
rebase-i: Ignore comments and blank lines in peek_next_command
lib-rebase: Allow comments and blank lines to be added to the rebase script
lib-rebase: Provide clearer debugging info about what the editor did
Add a command "fixup" to rebase --interactive
t3404: Use test_commit to set up test repository
When a squash/fixup fails due to a conflict, the user is required to
edit the commit message. Previously, if further squash/fixup commands
followed the conflicting squash/fixup, this user-edited message was
discarded and a new automatically-generated commit message was
suggested.
Change the handling of conflicts within squash/fixup command series:
Whenever the user is required to intervene, consider the resulting
commit to be a new basis for the following squash/fixups and use its
commit message in later suggested combined commit messages.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the "rebase -i" commands include a series of fixup commands without
any squash commands, then commit the combined commit using the commit
message of the corresponding "pick" without starting up the
commit-message editor.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alter the file $SQUASH_MSG in place rather than outputting the new
message then juggling it around. Change the function name
accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call it instead of repeating similar code blocks in several places.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change has no practical effect but makes the code easier to
follow.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...instead of repeating the same short but slightly obscure blob of
code in several places.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read the old count from the first line of the old commit message
rather than counting the number of commit message blocks in the file.
This is simpler, faster, and more robust (e.g., it cannot be confused
by strange commit message contents).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the numeral "2" instead of the word "two" when two commits are
being interactively squashed. This makes the treatment consistent
with that for higher numbers of commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a constant AMEND holding the filename of the $DOTEST/amend file,
and document how this temporary file is used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a constant AUTHOR_SCRIPT, holding the filename of the
$DOTEST/author_script file, and document how this temporary file is
used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add documentation, inferred by reverse-engineering, about how
git-rebase--interactive.sh uses many of its temporary files.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The filename constant $MSG was previously used in some places and
written out literally in others.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inline expression when generating output rather than overwriting the
"sha1" local variable with a short SHA1.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This branch of the "if" is only executed if $no_ff is empty, which
only happens if $1 was not '-n'. (This code has been dead since
1d25c8cf82eead72e11287d574ef72d3ebec0db1.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test $no_ff separately rather than testing it indirectly by gluing it
onto a comparison of two SHA1s.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-merge-base:
rebase -i: teach --onto A...B syntax
rebase: fix --onto A...B parsing and add tests
"rebase --onto A...B" replays history on the merge base between A and B
"checkout A...B" switches to the merge base between A and B
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rewriting commits on a topic branch, sometimes it is easier to
compare the version of commits before and after the rewrite if they are
based on the same commit that forked from the upstream. An earlier commit
by Junio (fixed up by the previous commit) gives "--onto A...B" syntax to
rebase command, and rebases on top of the merge base between A and B;
teach the same to the interactive version, too.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach a new option, --autosquash, to the interactive rebase.
When the commit log message begins with "!fixup ...", and there
is a commit whose title begins with the same ..., automatically
modify the todo list of rebase -i so that the commit marked for
squashing come right after the commit to be modified, and change
the action of the moved commit from pick to squash.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: abort cleanly if the editor fails to launch
technical-docs: document hash API
api-strbuf.txt: fix typos and document launch_editor()
If the user's configured editor is emacsclient, the editor
will fail to launch if emacs is not running and the git
command that tried to lanuch the editor will abort. For most
commands, all you have to do is to start emacs and repeat
the command.
The "git rebase -i" command, however, aborts without cleaning
the "$GIT_DIR/rebase-merge" directory if it fails to launch the
editor, so you'll need to do "git rebase --abort" before
repeating the rebase command.
Change "git rebase -i" to terminate using "die_abort" (instead of
with "die") if the initial launch of the editor fails.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command is like "squash", except that it discards the commit message
of the corresponding commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
help -a: do not unnecessarily look for a repository
Do not try to remove directories when removing old links
rebase -i: more graceful handling of invalid commands
help -i: properly error out if no info viewer can be found
Currently, when there is an invalid command, the rest of the line is
still treated as if the command had been valid, i.e. rebase -i attempts
to produce a patch, using the next argument as a SHA1 name. If there is
no next argument or an invalid one, very confusing error messages
appear (the line was '.'; path to git-rebase-todo substituted):
Unknown command: .
fatal: ambiguous argument 'Please fix this in the file $somefile.':
unknown revision or path not in the working tree.
Use '--' to separate paths from revisions
fatal: Not a valid object name Please fix this in the file $somefile.
fatal: bad revision 'Please fix this in the file $somefile.'
Instead, verify the validity of the remaining line and error out earlier
if necessary.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't want to use output() on git-commit --amend when rewording the
commit message. This leads to confusion as the editor is run in a
subshell with it's output saved away, leaving the user with a seemingly
frozen terminal.
Fix by removing the output part.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to edit just the commit message for a commit
using 'git rebase -i' by introducing the "reword" command.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a rebase with --onto, the correct test for whether we can skip
rewriting a commit is if it is already on top of $ONTO, not $UPSTREAM.
Without --onto, this distinction does not exist and the behavior does
not change.
In a situation with two merged branches on a common base X:
X---o---o---o---M
\ /
x---x---x---x
Y
if we try to move the branches from their base on X to be based on Y,
so as to get
X
Y---o'--o'--o'--M'
\ /
x'--x'--x'--x'
then we fail. The command `git rebase -p --onto Y X M` moves only the
first-parent chain, like so:
X
\
x---x---x---x
\
Y---o'--o'--o'--M'
because it mistakenly drops the other branch(es) x---x---x---x from
the TODO file. This tests and fixes this behavior.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
it was introduced in 68a163c9b4
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Jöhännës "Dschö" Schindëlin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When picking commits whose parents have not changed, we do not need to
rewrite the commit. We do not need to reset the working directory to
the parent's state, either.
Requested by Sverre Rabbelier.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Actually, I think the issue is pretty independent of submodules; when
"git commit" gets an empty parameter, it misinterprets it as a file.
So avoid passing an empty parameter to "git commit".
Actually, this is a nice cleanup, as MSG_FILE and EDIT_COMMIT were mutually
exclusive; use one variable instead
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d911d14 (rebase -i: learn to rebase root commit, 2009-01-02) tried to
remember the --root flag across a merge conflict in a broken way.
Introduce a flag file $DOTEST/rebase-root to fix and clarify.
While at it, also make sure $UPSTREAM is always initialized to guard
against existing values in the environment.
[tr: added tests]
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are not rebasing with --root, then $# can only be either 1 (base)
or 2 (base and the name of the branch to be rebased).
If we are rebasing with --root, then it is Ok if $# is 0 (rebase the
current branch down to everything) or 1 (rebase the named branch down to
everything).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/rebase-root:
rebase: update documentation for --root
rebase -i: learn to rebase root commit
rebase: learn to rebase root commit
rebase -i: execute hook only after argument checking
Prior to that, if the user chose "squash" as a first action, the stderr
looked like:
grep: /home/madcoder/dev/scm/git/.git/rebase-merge/done: No such file or directory
Cannot 'squash' without a previous commit
Now the first line is gone.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-rebase -i a new option --root, which instructs it to rebase
the entire history leading up to <branch>. This is mainly for
symmetry with ordinary git-rebase; it cannot be used to edit the root
commit in-place (it requires --onto <newbase>). Commits that already
exist in <newbase> are skipped.
In the normal mode of operation, this is fairly straightforward. We
run cherry-pick in a loop, and cherry-pick has supported picking the
root commit since f95ebf7 (Allow cherry-picking root commits,
2008-07-04).
In --preserve-merges mode, we track the mapping from old to rewritten
commits and use it to update the parent list of each commit. In this
case, we define 'rebase -i -p --root --onto $onto $branch' to rewrite
the parent list of all root commit(s) on $branch to contain $onto
instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the pre-rebase-hook would be launched before we knew if
the <upstream> [<branch>] arguments were supplied.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge that has a conflict was rebased, then rebase stopped to let
the user resolve the conflicts. However, thereafter --continue failed
because the author-script was not saved. (This is rebase -i's way to
preserve a commit's authorship.) This fixes it by doing taking the same
failure route after a merge that is also taken after a normal cherry-pick.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sh/rebase-i-p:
git-rebase--interactive.sh: comparision with == is bashism
rebase-i-p: minimum fix to obvious issues
rebase-i-p: if todo was reordered use HEAD as the rewritten parent
rebase-i-p: do not include non-first-parent commits touching UPSTREAM
rebase-i-p: only list commits that require rewriting in todo
rebase-i-p: fix 'no squashing merges' tripping up non-merges
rebase-i-p: delay saving current-commit to REWRITTEN if squashing
rebase-i-p: use HEAD for updating the ref instead of mapping OLDHEAD
rebase-i-p: test to exclude commits from todo based on its parents
Jeff King noticed that this series uses non-portable ${var:0:7} syntax
to splice a string, which is not even in POSIX, in the script. A quick
look at around the offending part revealed a few issues, which this commit
fixes:
* Why filter output from "rev-list --left-right A...B" and look for the
ones that begin with ">"? Wouldn't "rev-list A..B" give that?
* The abbreviated SHA-1 are made with "rev-list --abbrev=7" into $TODO in
an earlier invocation, and it can be more than 7 letters to avoid
ambiguity. Not just that "${r:0:7} is not even in POSIX", but use of
it here is actively wrong.
* There is no point in catting a single file and piping it into grep.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This seems like the best guess we can make until git sequencer marks are
available. That being said, within the context of re-ordering a commit before
its parent in todo, I think applying it on top of the current commit seems like
a reasonable assumption of what the user intended.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This covers an odd boundary case found by Avi Kivity's script where a branch
coming off of UPSTREAM is merged into HEAD. Initially it show up in
UPSTREAM..HEAD, but technically UPSTREAM is not moving, the rest of head is, so
we should not need to rewrite the merge.
This adds a check saying we can keep `preserve=t` if `p=UPSTREAM`...unless this
is the first first-parent commit in our UPSTREAM..HEAD rev-list, which could
very well point to UPSTREAM, but we still need to consider it as rewritten so we
start pulling in the rest of the UPSTREAM..HEAD commits that point to it.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is heavily based on Stephan Beyer's git sequencer rewrite of rebase-i-p.
Each commit is still found by rev-list UPSTREAM..HEAD, but a commit is only
included in todo if at least one its parents has been marked for rewriting.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also only check out the first parent if this commit if not a squash--if it is a
squash, we want to explicitly ignore the parent and leave the wc as is, as
cherry-pick will apply the squash on top of it.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current-commit was dumped to REWRITTEN, but then we squash the next
commit in to it, we have invalidated the HEAD was just written to REWRITTEN.
Instead, append the squash hash to current-commit and save both of them the next
time around.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If OLDHEAD was reordered in the todo, and its mapped NEWHEAD was used to set the
ref, commits reordered after OLDHEAD in the todo would should up as un-committed
changes.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`rebase -i -p` got its rev-list of commits to keep by --left-right and
--cherry-pick. Adding --cherry-pick would drop commits that duplicated changes
already in the rebase target.
The dropped commits were then forgotten about when it came to rewriting the
parents of their descendents, so the descendents would get cherry-picked with
their old, unwritten parents and essentially make the rebase a no-op.
This commit adds a $DOTEST/dropped directory to remember dropped commits and
rewrite their children's parent as the dropped commit's possibly-rewritten
first-parent.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In case there is no commit to apply (for example because you rebase to
upstream and all your local patches have been applied there), do not
fail. The non-interactive rebase already behaves that way.
Do this by introducing a new command, "noop", which is substituted for
an empty commit list, so that deleting the commit list can still abort
as before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It is sometimes desirable to disable the safety net of pre-rebase hook
when the user knows what he is doing (for example, when the original
changes on the branch have not been shown to the public yet).
This teaches --no-verify option to git-rebase, which is similar to the way
pre-commit hook is bypassed by git-commit.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The original git-rebase honored pre-rebase hook so that public branches
can be protected from getting rebased, but rebase --interactive ignored
the hook entirely. This fixes it.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
One would expect that the prepare-commit-msg hook gets 'squash' as the
second argument when squashing commits with 'rebase -i'. However,
that was not the case, as it got 'merge' instead. This patch fixes
the problem.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
"git rebase --continue" issued after git rebase being stop by "edit"
command is trying to amend the last commit using stage changes. However,
if the last commit is not the commit that was marked as "edit" then it
can produce unexpected results.
For instance, after being stop by "edit", I have made some changes to
commit message using "git commit --amend". After that I realized that
I forgot to add some changes to some file. So, I said "git add file"
and the "git rebase --continue". Unfortunately, it caused that the new
commit message was lost.
Another problem is that after being stopped at "edit", the user adds new
commits. In this case, automatic amend behavior of git rebase triggered
by some stage changes causes that not only that the log message of the
last commit is lost but that it will contain also wrong Author and Date
information.
Therefore, this patch restrict automatic amend only to the situation
where HEAD is the commit at which git rebase stop by "edit" command.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git rebase interactive is stopped by "edit" command and then the user
said "git rebase --continue" while having some stage changes, git rebase
interactive is trying to amend the last commit by doing:
git --soft reset && git commit
However, the user can abort commit for some reason by providing an empty
log message, and that would leave the last commit undone, while the user
being completely unaware about what happened. Now if the user tries to
continue, by issuing "git rebase --continue" that squashes two previous
commits.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing parent rewriting did not handle the case where a previous
commit was amended (via edit or squash). Fix by always putting the
new sha1 of the last commit into the $REWRITTEN map.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
'git rebase -i -p' forgot to update the index and working directory
during fast forwards. Fix this. Makes 'GIT_EDITOR=true rebase -i -p
<ancestor>' a no-op again.
Also, it attempted to do a fast forward even if it was instructed not
to commit (via -n). Fall back to the cherry-pick code path and let
that handle the issue for us.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
In a rebase session where more than one commit is to be 'edit'ed, and the
user spends considerable time to 'edit' a commit, it is easy to forget what
one wanted to 'edit' at the individual commits. It would be helpful to see
at which commit the rebase stopped.
Incidentally, if the rebase stopped due to merge conflicts or other errors,
the commit was already reported ("Could not apply $sha1..."), but when
rebase stopped after successfully applying an "edit" commit, it would not
mention it. With this change the commit is reported.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing 1.5.6.4 release notes
git fetch-pack: do not complain about "no common commits" in an empty repo
rebase-i: keep old parents when preserving merges
t7600-merge: Use test_expect_failure to test option parsing
Fix buffer overflow in prepare_attr_stack
Fix buffer overflow in git diff
Fix buffer overflow in git-grep
git-cvsserver: fix call to nonexistant cleanupWorkDir()
Documentation/git-cherry-pick.txt et al.: Fix misleading -n description
Conflicts:
RelNotes
When "rebase -i -p" tries to preserve merges of unrelated branches, it
lost some parents:
- When you have more than two parents, the commit in the new history
ends up with fewer than expected number of parents and this breakage
goes unnoticed;
- When you are rebasing a merge with two parents and one is lost, the
command tries to cherry-pick the original merge commit, and the command
fails.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the files generated and used during a rebase are never to be
tracked, they should live in $GIT_DIR. While at it, avoid the rather
meaningless term "dotest" to "rebase", and unhide ".dotest-merge".
This was wished for on the mailing list, but so far unimplemented.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add some checks that --continue/--abort/--skip
actions are used without --onto, -p, -t, etc.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"merge" and "reset" leave the original point in history in ORIG_HEAD,
which makes it easy to go back to where you were before you inflict a
major damage to your history and realize that you do not like the result
at all. These days with reflog, we technically do not need to use
ORIG_HEAD, but it is a handy way nevertheless.
This teaches "am" and "rebase" (all forms --- the vanilla one that uses
"am" as its backend, "-m" variant that cherry-picks, and "--interactive")
to do the same.
The original idea and a partial implementation to do this only for "rebase
-m" was by Brian Gernhardt; this extends on his idea.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rebase -i already supports 'p', 'e' and 's' as aliases for 'pick',
'edit' and 'squash', but one could know it only by reading the source
code. If a user rebases a lot, it's quite handy, so mention these short
forms as well.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the upstream argument to rebase (the first argument) was relative to
HEAD and the name of the branch to rebase (the second argument) was given,
the upstream would have been interpreted relative to the second argument.
In particular, this command
git rebase -i HEAD topic
would always finish with "Nothing to do". (a1bf91e fixed the same issue
for non-interactive rebase.)
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing or stashing, chances are that you do not care about
dirty submodules, since they are not updated by those actions anyway.
So ignore the submodules' states.
Note: the submodule states -- as committed in the superproject --
will still be stashed and rebased, it is _just_ the state of the
submodule in the working tree which is ignored.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-n" syntax is not supported by System V versions of
tail (which prefer "tail -1"). Unfortunately "tail -1" is
not actually POSIX. We had some of both forms in our
scripts.
Since neither form works everywhere, this patch replaces
both with the equivalent sed invocation:
sed -ne '$p'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
System V versions of grep (such as Solaris /usr/bin/grep)
don't understand either of these options. git's usage of
"grep -e pattern" fell into one of two categories:
1. equivalent to "grep pattern". -e is only useful here if
the pattern begins with a "-", but all of the patterns
are hardcoded and do not begin with a dash.
2. stripping comments and blank lines with
grep -v -e "^$" -e "^#"
We can fortunately do this in the affirmative as
grep '^[^#]'
Uses of "-q" can be replaced with redirection to /dev/null.
In many tests, however, "grep -q" is used as "if this string
is in the expected output, we are OK". In this case, it is
fine to just remove the "-q" entirely; it simply makes the
"verbose" mode of the test slightly more verbose.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On hitting an edit point in an interactive rebase, git should prompt
the user to run "git rebase --continue"
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command repeats "Rebasing (1/1)" many times even when
there is only one task remaining, because mark_action_done() is
called to skip comment and empty lines in the TODO file.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After replaying a single change, the code performed a number of checks,
but some of them were for sanity checking, failures from which should
make the command abort, and others were checks to see if it should make
a new commit object. Stringing them together with "&&" was wrong.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit message template when squashing multiple commits is
prepared by concatenating the messages of existing commits
together. If the messages from some of them end with incomplete
lines, this would result in a suboptimal message template. Make
sure that we add a terminating LF after each commit message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During git-rebase --interactive's --continue implementation we used
to silently restart the rebase if the user had made the commit
for us. This is common if the user stops to edit a commit and
does so by amending it. My recent change to watch git-commit's
exit status broke this behavior.
Thanks to Bernt Hansen for catching it in 1.5.4-rc1.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git-commit fails for any reason then git-rebase needs to stop
and not plow through the rest of the series. Its unlikely that
a future git-commit will succeed if the current attempt failed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are rebasing changes that contain potential whitespace
errors that our .git/hooks/pre-commit hook looks for and fails
on then git-commit will fail to commit that change. This causes
git-rebase--interactive to squash commits together, even though it
was not requested to do so by the todo file.
Passing --no-verify to git-commit makes git-rebase -i behave more
like git-rebase normally would in such conditions, providing more
consistent behavior between the different rebase implementations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 376ccb8cbb (rebase -i: style
fixes and minor cleanups), unchanged SHA-1s are no longer mapped via
$REWRITTEN. But the updating phase was not prepared for the old head
not being rewritten.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A Porcelain command that uses cherry-pick or revert may make a commit
out of resolved index itself, in which case telling the user to commit
the result is not appropriate at all. This allows GIT_CHERRY_PICK_HELP
environment variable to be set by the calling Porcelain in order to
override the built-in help text.
[jc: this is heavily modified from the original but should be equivalent
in spirit]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
