It was pointed out that the current behaviour might mispart a patch comment
so remove this behaviour for now.
[jc: this fixes "From: line in the middle" check in t5100 test.]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently the test passes with 1.3.3 but not with the tip of
"master". This is to verify the fixes from Eric W Biedermann.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of "diff" (e.g. on FreeBSD and older Linux systems) do
not support the "\ No newline at end of file" remark and are not
able to generate the patches needed for this test. This lets the
test fail, although git-apply is working perfectly. This patch adds
the pre-generated patches to t/t4100/ and makes the test use them.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This does:
- add a "rev.simplify_history" flag which defaults to on
- it turns it off for "git whatchanged" (which thus now has real
semantics outside of "git log")
- it adds a command line flag ("--full-history") to turn it off for
others (ie you can make "git log" and "gitk" etc get the semantics if
you want to.
Now, just as an example of _why_ you really really really want to simplify
history by default, apply this patch, install it, and try these two
command lines:
gitk --full-history -- git.c
gitk -- git.c
and compare the output.
So with this, you can also now do
git whatchanged -p -- gitweb.cgi
git log -p --full-history -- gitweb.cgi
and it will show the old history of gitweb.cgi, even though it's not
relevant to the _current_ state of the name "gitweb.cgi"
NOTE NOTE NOTE! It will still actually simplify away merges that didn't
change anything at all into either child. That creates these bogus strange
discontinuities if you look at it with "gitk" (look at the --full-history
gitk output for git.c, and you'll see a few strange cases).
So the whole "--parent" thing ends up somewhat bogus with --full-history
because of this, but I'm not sure it's worth even worrying about. I don't
think you'd ever want to really use "--full-history" with the graphical
representation, I just give it as an example exactly to show _why_ doing
so would be insane.
I think this is trivial enough and useful enough to be worth merging into
the stable branch.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since `git-annotate' is an expensive operation to run it may be
desirable to deactivate this functionality. This patch introduces
the `gitweb.blame' option to git-repo-config and disables the blame
support by default.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds an interface for `git-blame' to `gitweb.cgi'.
Links to it are placed in `git_blob'.
Internally the code uses `git-annotate' because `git-blame's output
differs for files that have been renamed in the past. However, I like
the term `blame' better.
[jc: blame can be told to produce the compatible format btw...]
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this patch we have a speedup and much lower IO when
importing trees with many branches. Instead of forcing
index re-population for each branch switch, we keep
many index files around, one per branch.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We now capture the output of cvsps to a tempfile, and then read it in.
cvsps 2.1 works quite a bit "in memory", and only prints its patchset
info once it has finished talking with cvs, but apparently retaining
all that memory allocation. With this patch, cvsps is finished and
reaped before cvsimport start working (and growing). So the footprint
of the whole process is much lower.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsps output often contains references to CVSPS_NO_BRANCH, commits
that it could not trace to a branch. Ignore that branch.
Additionally, cvsps will sometimes draw circular relationships
between branches -- where two branches are recorded as opening
from the other. In those cases, and where the ancestor branch
hasn't been seen, ignore it.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fix the usage string and clean up the docs while we are at it
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When extra command line arguments are given to a command that
was alias-expanded, the code generated a wrong argument list,
leaving the original alias in the result, and forgetting to
terminate the new argv list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
P4import currently creates a git tag for every commit it imports.
When importing from a large repository too many tags can be created
for git to manage, so this provides an option to shut that feature
off if necessary.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
* git://git.bogomips.org/git-svn: (25 commits)
git-svn: rebuild convenience and bugfixes
git-svn: svn (command-line) 1.0.x compatibility
git-svn: tests no longer fail if LC_ALL is not a UTF-8 locale
git-svn: bugfix and optimize the 'log' command
git-svn: Eliminate temp file usage in libsvn_get_file()
git-svn: fix several small bugs, enable branch optimization
git-svn: avoid creating some small files
git-svn: make the $GIT_DIR/svn/*/revs directory obsolete
git-svn: add support for Perl SVN::* libraries
git-svn: add 'log' command, a facsimile of basic `svn log'
git-svn: add UTF-8 message test
git-svn: add some functionality to better support branches in svn
git-svn: add --shared and --template= options to pass to init-db
git-svn: add --repack and --repack-flags= options
git-svn: minor cleanups, extra error-checking
git-svn: Move all git-svn-related paths into $GIT_DIR/svn
git-svn: support manually placed initial trees from fetch
git-svn: optimize --branch and --branch-all-ref
git-svn: --branch-all-refs / -B support
git-svn: support -C<num> passing to git-diff-tree
...
We will now automatically fetch the refs/remotes/git-svn ref
from origin and store a Pull: line for it.
--remote=<origin> may be passed if your remote is named something
other than 'origin'
Also, remember to make GIT_SVN_DIR whenever we need to create
.rev_db
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Tested on a plain Ubuntu Warty installation
using subversion 1.0.6-1.2ubuntu3
svn add --force was never needed, as it only affected
directories, which git (thankfully) doesn't track
The 1.0.x also didn't support symlinks(!), so allow NO_SYMLINK
to be defined for running tests
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Revisions with long commit messages were being skipped, since
the 'git-svn-id' metadata line was at the end and git-log uses a
32k buffer to print the commits.
Also the last 'git-svn-id' metadata line in a commit is always
the valid one, so make sure we use that, as well.
Made the verbose flag work by passing the correct option switch
('--summary') to git-log.
Finally, optimize -r/--revision argument handling by passing
the appropriate limits to revision
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This means we'll have a loose object when we encounter a symlink
but that's not the common case.
We also don't have to worry about svn:eol-style when using the
SVN libraries, either. So remove the code to deal with that.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Share the repack counter between branches when doing
multi-fetch.
Pass the -d flag to git repack by default. That's the
main reason we will want automatic pack generation, to
save space and improve disk cache performance. I won't
add -a by default since it can generate extremely large
packs that make RAM-starved systems unhappy.
We no longer generate the .git/svn/$GIT_SVN_ID/info/uuid
file, either. It was never read in the first place.
Check for and create .rev_db if we need to during fetch (in case
somebody manually blew away their .rev_db and wanted to start
over. Mainly makes debugging easier).
Croak with $? instead of $! if there's an error closing pipes
Quiet down some of the chatter, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
repo_path_split() is already pretty fast, and is already
optimized via caching.
We also don't need to create an exclude file if we're
relying on the SVN libraries.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is a very intrusive change, so I've beefed up the tests
significantly. Added 'full-test' a target to the Makefile,
to test different possible configurations. This is intended
for maintainers only. Users should only be concerned with
'test' succeeding.
We now have a very simple custom database format for handling
mapping of svn revisions => git commits. Of course, we're
not really using it yet, either.
Also disabled automatic branch-finding on new trees for now.
It's too easily broken. revisions_eq() function should be
helpful for branch detection.
Also removed an extra assertion in fetch_cmd() that wasn't
correctly done. This bug was found by full-test.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This means we no longer have to deal with having bloated SVN
working copies around and we get a nice performance increase as
well because we don't have to exec the SVN binary and start a
new server connection each time.
Of course we have to manually manage memory with SVN::Pool
whenever we can, and hack around cases where SVN just eats
memory despite pools (I blame Perl, too). I would like to
keep memory usage as stable as possible during long fetch/commit
processes since I still use computers with only 256-512M RAM.
commit should always be faster with the SVN library code. The
SVN::Delta interface is leaky (or I'm not using it with pools
correctly), so I'm forking on every commit, but that doesn't
seem to hurt performance too much (at least on normal Unix/Linux
systems where fork() is pretty cheap).
fetch should be faster in most common cases, but probably not all.
fetches will be faster where client/server delta generation is
the bottleneck and not bandwidth. Of course, full-files are
generated server-side via deltas, too. Full files are always
transferred when they're updated, just like git-svnimport and
unlike command-line svn. I'm also hacking around memory leaks
(see comments) here by using some more forks.
I've tested fetch with http://, https://, file://, and svn://
repositories, so we should be reasonably covered in terms of
error handling for fetching.
Of course, we'll keep plain command-line svn compatibility as a
fallback for people running SVN 1.1 (I'm looking into library
support for 1.1.x SVN, too). If you want to force command-line
SVN usage, set GIT_SVN_NO_LIB=1 in your environment.
We also require two simultaneous connections (just like
git-svnimport), but this shouldn't be a problem for most
servers.
Less important commands:
show-ignore is slower because it requires repository
access, but -r/--revision <num> can be specified.
graft-branches may use more memory, but it's a
short-term process and is funky-filename-safe.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This quick feature should make it easy to look up svn log
messages when svn users refer to -r/--revision numbers.
The following features from `svn log' are supported:
--revision=<n>[:<n>] - is supported, non-numeric args are not:
HEAD, NEXT, BASE, PREV, etc ...
-v/--verbose - just maps to --raw (in git log), so
it's completely incompatible with
the --verbose output in svn log
--limit=<n> - is NOT the same as --max-count,
doesn't count merged/excluded commits
--incremental - supported (trivial :P)
New features:
--show-commit - shows the git commit sha1, as well
--oneline - our version of --pretty=oneline
Any other arguments are passed directly to `git log'
Signed-off-by: Eric Wong <normalperson@yhbt.net>
New commands:
graft-branches - The most interesting command of the bunch. It
detects branches in SVN via various techniques (currently
regexes and file copies). It can be later extended to handle
svk and other properties people may use to track merges in svk.
Basically, merge tracking is not standardized at all in the SVN
world, and git grafts are perfect for dealing with this
situation.
Existing branch support (via tree matches) is only handled at
fetch time.
The following tow were originally implemented as shell scripts
several months ago, but I just decided to streamline things a
bit and added them to the main script.
multi-init - supports git-svnimport-like command-line syntax for
importing repositories that are layed out as recommended by the
SVN folks. This is a bit more tolerant than the git-svnimport
command-line syntax and doesn't require the user to figure out
where the repository URL ends and where the repository path
begins.
multi-fetch - runs fetch on all known SVN branches we're
tracking. This will NOT discover new branches (unlike
git-svnimport), so multi-init will need to be re-run (it's
idempotent).
Consider these three to be auxilliary commands (like
show-ignore, and rebuild) so their behavior won't receive as
much testing or scrutiny as the core commands (fetch and
commit).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This should help keep disk usage sane for large imports.
--repack takes an optional argument for the interval, it
defaults to 1000 if no argument is specified.
Arguments to --repack-flags are passed directly to git-repack.
No arguments are passed by default.
Idea stolen from git-cvsimport :)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
While we're at it, read_repo_config has been added and
expanded to handle case where command-line arguments are
optional to Getopt::Long
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since GIT_SVN_ID usage is probably going to become more
widespread <evil grin>, we won't run the chance of somebody
having a GIT_SVN_ID name that conflicts with one of the default
directories that already exist in $GIT_DIR (branches/tags).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Sometimes I don't feel like downloading an entire tree again when
I actually decide a branch is worth tracking, so some users can
get around it more easily with this.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
By breaking the pipe read once we've seen a commit twice.
This should make -B/--branch-all-ref faster and usable on a
frequent basis.
We use topological order now for calling git-rev-list, and any
commit we've seen before should imply that all parents have been
seen (at least I hope that's the case for --topo-order).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This should make life easier for all those who type:
`git-rev-parse --symbolic --all | xargs -n1 echo -b`
every time they run git-svn fetch.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If new revisions are fetched, that implies we haven't merged,
acked, or nacked them yet, and attempting to write the tree
we're committing means we'd silently clobber the newly fetched
changes.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svn forces UTF-8 for commit messages, and with LC_ALL set to 'C'
it is unable to determine encoding of the git commit message.
Now we'll just assume the user has set LC_* correctly for
the commit message they're using.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If we read the maximum size of our buffer into $buf, and the
last character is '\015', there's a chance that the character is
'\012', which means our regex won't work correctly. At the
worst case, this could introduce an extra newline into the code.
We'll now read an extra character if we see '\015' is the last
character in $buf.
We also forgot to recalculate the length of $buf after doing the
newline substitution, causing some files to appeare truncated.
We'll do that now and force byte semantics in length() for good
measure.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svn has trouble parsing files with embedded '@' characters. For
example,
svn propget svn:keywords foo@bar.c
svn: Syntax error parsing revision 'bar.c'
I asked about this on #svn and the workaround suggested was to append
an explicit revision specifier:
svn propget svn:keywords foo@bar.c@BASE
This patch appends '@BASE' to the filename in all calls to 'svn
propget'.
Patch originally by Seth Falcon <sethfalcon@gmail.com>
Seth: signoff?
[ew: Made to work with older svn that don't support peg revisions]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Some changes to the latest git.git made this test croak. So
we'll always just force everything when using a new branch.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The listrefs procedure was inadvertently removed during the course of
development, but there is still a user of it, so resurrect it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* master: (148 commits)
GIT 1.4.0
v267
prepend '--' to filelist when calling git-diff-tree
v266
remove Christian's email address
v265
handle utf8 characters from /etc/passwd
v264
fix: Use of uninitialized value
v263
allow working in repositories with textual symref HEAD
resolve textual hashes when looking up "refs"
v262
define default colors
v261
fix leading whitespace in commit text
more tags
v260
attach tag to the link
v259
...
By being an internal command git-get-commit-id can make use of
struct ustar_header and other stuff and stops wasting precious
disk space.
Note: I recycled one of the two "tar-tree" entries instead of
splitting that cleanup into a separate patch.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/shared:
shared repository: optionally allow reading to "others".
git-clone: fix --bare over dumb-http
shared repository - add a few missing calls to adjust_shared_perm().
Fix formatting of Documentation/git-clone.txt
builtin-init-db: spell the in-program configuration variable in lowercase.
This enhances core.sharedrepository to have additionally
specify that read and exec permissions to be given to others as
well. It is useful when serving a repository via gitweb and
git-daemon that runs as a user outside the project group.
The configuration item can take the following values:
[core]
sharedrepository ; the same as "group"
sharedrepository = true ; ditto
sharedrepository = 1 ; ditto
sharedrepository = group ; allow rwx to group
sharedrepository = all ; allow rwx to group, allow rx to other
sharedrepository = umask ; not shared - use umask
It also extends "git init-db" to take "--shared=all" and friends
from the command line.
Signed-off-by: Junio C Hamano <junkio@cox.net>
