In commit f20f387, "git commit" notices and dies much
earlier when we have a bogus commit identity. That commit
did not add a test because we cannot do so reliably (namely,
we can only trigger the behavior on a system where the
automatically generated identity is bogus). However, now
that we have a prerequisite check for this feature, we can
add a test that will at least run on systems that produce
such a bogus identity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test t7502.21 checks whether we write the committer name
into COMMIT_EDITMSG when it has been automatically
determined. However, not all systems can produce valid
automatic identities.
Prior to f20f387 (commit: check committer identity more
strictly), this test worked even when we did not have a
valid automatic identity, since it did not run the strict
test until after we had generated the template. That commit
tightened the check to fail early (since we would fail
later, anyway), meaning that systems without a valid GECOS
name or hostname would fail the test.
We cannot just work around this, because it depends on
configuration outside the control of the test script.
Therefore we introduce a new test_prerequisite to run this
test only on systems where automatic ident works at all.
As a result, we can drop the confusing test_must_fail bit
from the test. The intent was that by giving "git commit"
invalid input (namely, nothing to commit), that it would
stop at a predictable point, whether we had a valid identity
or not, from which we could view the contents of
COMMIT_EDITMSG. Since that assumption no longer holds, and
we can only run the test when we have a valid identity,
there is no reason not to let commit run to completion. That
lets us be more robust to other unforeseen failures.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t7502.20, we run "git commit" and check that it warns us
that the author and committer identity are not the same
(this is always the case in the test environment, since we
set up the idents differently).
Instead of actually making a commit, we have a clean index,
so the "git commit" we run will fail. This is marked as
might_fail, which is not really correct; it will always fail
since there is nothing to commit.
However, the only reason not to do a complete commit would
be to see the intermediate state of the COMMIT_EDITMSG file
when the commit is not completed. We don't need to care
about this, though; even a complete commit will leave
COMMIT_EDITMSG for us to view. By doing a real commit and
dropping the might_fail, we are more robust against other
unforeseen failures of "git commit" that might influence our
test result.
It might seem less robust to depend on the fact that "git
commit" leaves COMMIT_EDITMSG in place after a successful
commit. However, that brings this test in line with others
parts of the script, which make the same assumption.
Furthermore, if that ever does change, the right solution is
not to prevent commit from completing, but to set EDITOR to
a script that will record the contents we see. After all,
the point of these tests is to check what the user sees in
their EDITOR, so that would be the most direct test. For
now, though, we can continue to use the "shortcut" that
COMMIT_EDITMSG is left intact.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7502.20 and t7502.21 check that the author and committer
name are mentioned in the commit message template under
certain circumstances. However, they end up checking a much
larger and unnecessary portion of the template. Let's narrow
their checks to the specific lines.
While we're at it, let's give these tests more descriptive
names, so their purposes are more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests tries to ensure that editor is not run due
to an early failure. However, it needs to quote the pathname
of the trash directory used in $GIT_EDITOR, since git will
pass it along to the shell. In other words, the test would
pass whether the code was correct or not, since the unquoted
editor specification would never run.
We never noticed the problem because the code is indeed
correct, so git-commit never even tried to run the editor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using write_script saves us a few lines of code, and means
we consistently use $SHELL_PATH.
We can also drop the setting of the $pwd variable from
$(pwd). In the first instance, there is no reason to use it
(we can just use $(pwd) directly two lines later, since we
are interpolating the here-document). In the second
instance, it is totally pointless and probably just a
cut-and-paste from the first instance.
Finally, we can use a non-interpolating here document for
the final script, which saves some quoting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GETTEXT_POISON scrapes everything in translated strings, including \n.
t4205.12 however needs this \n in matching the end result. Keep this
\n out of translation to make t4205.12 happy.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorders t/test-lib.sh so that we dot-source GIT-BUILD-OPTIONS that
records the shell and Perl the user told us to use with Git a lot
early, so that test-lib.sh script itself can use "$PERL_PATH" in
one of its early operations.
* jc/test-lib-source-build-options-early:
test-lib: reorder and include GIT-BUILD-OPTIONS a lot earlier
Finishing touches to the XDG support (new feature for 1.7.12) and
tests.
* mm/config-xdg:
t1306: check that XDG_CONFIG_HOME works
ignore: make sure we have an xdg path before using it
attr: make sure we have an xdg path before using it
test-lib.sh: unset XDG_CONFIG_HOME
When we are leaving a detached HEAD, we do a revision traversal to
check whether we are orphaning any commits, marking the commit we're
leaving as the start of the traversal, and all existing refs as
uninteresting.
Prior to commit 468224e5, we did so by calling for_each_ref, and
feeding each resulting refname to setup_revisions. Commit 468224e5
refactored this to simply mark the pending objects, saving an extra
lookup.
However, it confused the "flags" parameter to the each_ref_fn
clalback, which is about the flags we found while looking up the ref
with the object flag. Because REF_ISSYMREF ("this ref is a symbolic
ref, e.g. refs/remotes/origin/HEAD") happens to be the same bit
pattern as SEEN ("we have picked this object up from the pending
list and moved it to revs.commits list"), we incorrectly reported
that a commit previously at the detached HEAD will become
unreachable if the only ref that can reach the commit happens to be
pointed at by a symbolic ref.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combination of GIT_DIR and GIT_WORK_TREE can be used to manage
files in one directory hierarchy while keeping the repository that
keeps track of them outside the directory hierarchy. For example:
git init --bare /path/to/there
alias dotfiles="GIT_DIR=/path/to/there GIT_WORK_TREE=/path/to/here git"
cd /path/to/here
dotfiles add file
dotfiles commit -a -m "add /path/to/here/file"
...
lets you manage files under /path/to/here/ in the repository located
at /path/to/there.
git-submodule however fails to add submodules, as it is confused by
GIT_DIR and GIT_WORK_TREE environment variables when it tries to
work in the submodule, like so:
dotfiles submodule add http://path.to/submodule
fatal: working tree '/path/to/here' already exists.
Simply unsetting the environment where the command works on the
submodule is sufficient to fix this, as it has set things up so
that GIT_DIR and GIT_WORK_TREE do not even have to point at the
repository and the working tree of the submodule.
Signed-off-by: Daniel Graña <dangra@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command name removed from the list of commands via the exclusion
were overwritten and lost without being freed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We observe that the j-1 element can serve the same purpose as the i-1
element that we use in the strcmp(); it is either:
1. Exactly i-1, when the loop begins (and until we see a duplicate).
2. The same pointer that was stored at i-1 (if it was not a duplicate,
and we just copied it into place).
3. A pointer to an equivalent string (i.e., we rejected i-1 _because_
it was identical to j-1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages in git-rebase.sh for translation. While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we have additional shell wrappers (gettextln and eval_gettextln)
for gettext, we need to take into account these wrappers when running
'make pot' to extract messages from shell scripts.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was a bit hard to learn how <rev>^@, <rev>^! and various other
forms of range specifiers are used, because they were discussed
mostly in the prose part of the documentation, unlike various forms
of extended SHA-1 expressions that are listed in an enumerated list.
Also add a few more examples showing use of <rev>, <rev>..<rev> and
<rev>^! forms, stolen from a patch by Max Horn.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mergetool" did not support --tool-help option to give the list
of supported backends, like "git difftool" does.
* jc/mergetool-tool-help:
mergetool: support --tool-help option like difftool does
"git commit --amend" let the user edit the log message and then died
when the human-readable committer name was given insufficiently by
getpwent(3).
* jk/maint-commit-check-committer-early:
commit: check committer identity more strictly
The advise() function did not use varargs correctly to format
its message.
* jk/maint-advise-vaddf:
advice: pass varargs to strbuf_vaddf, not strbuf_addf
Running the http tests with valgrind does not work for two
reasons:
1. Apache complains about following the symbolic link from
git-http-backend to valgrind.sh.
2. Apache does not pass through the GIT_VALGRIND variable
to the backend CGI.
This patch fixes both problems. Unfortunately, there is a
slight hack we need to handle passing environment variables
through Apache. If we just tell it:
PassEnv GIT_VALGRIND
then Apache will complain when GIT_VALGRIND is not set. If
we try:
SetEnv GIT_VALGRIND ${GIT_VALGRIND}
then when GIT_VALGRIND is not set, it will pass through the
literal "${GIT_VALGRIND}". Instead, we now unconditionally
pass through GIT_VALGRIND from lib-httpd.sh into apache,
even if it is empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a bug with git rebase -i --root when a fixup or squash line is
applied to the new root. We attempt to amend the commit onto which they
apply with git reset --soft HEAD^ followed by a normal commit. Unlike a
real commit --amend, this sequence will fail against a root commit as it
has no parent.
Fix rebase -i to use commit --amend for fixup and squash instead, and
add a test for the case of a fixup of the root commit.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should override $HOME/.config, but we never actually tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e3ebc35 (config: fix several access(NULL) calls, 2012-07-12) was
fixing access(NULL) calls when trying to access $HOME/.config/git/config,
but missed the ones when trying to access $HOME/.config/git/ignore. Fix
and test this.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't have a core.attributesfile configured, we fall
back to checking XDG config, which is usually
$HOME/.config/git/attributes.
However, if $HOME is unset, then home_config_paths will return
NULL, and we end up calling fopen(NULL).
Depending on your system, this may or may not cause the
accompanying test to fail (e.g., on Linux and glibc, the
address will go straight to open, which will return EFAULT).
However, valgrind will reliably notice the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git respects XDG_CONFIG_HOME for some lookups, we
must be sure to cleanse the test environment. Otherwise, the
user's XDG_CONFIG_HOME could influence the test results.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to load a word one-byte-at-a-time was optimized into a
word-wide load instruction even when the pointer was not aligned,
which caused issues on architectures that do not like unaligned
access.
* jn/block-sha1:
Makefile: BLK_SHA1 does not require fast htonl() and unaligned loads
block-sha1: put expanded macro parameters in parentheses
block-sha1: avoid pointer conversion that violates alignment constraints
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
* mm/mediawiki-usability:
git-remote-mediawiki: allow page names with a ':'
git-remote-mediawiki: fix incorrect test usage in test
git-remote-mediawiki: properly deal with invalid remote revisions
git-remote-mediawiki: show progress information when getting last remote revision
git-remote-mediawiki: show progress information when listing pages
git-remote-mediawiki: use --force when adding notes
git-remote-mediawiki: get rid of O(N^2) loop
git-remote-mediawiki: make mediafiles export optional
git-remote-mediawiki: actually send empty comment when they're empty
git-remote-mediawiki: don't split namespaces with spaces
Split lower bits of ce_flags field and creates a new ce_namelen
field in the in-core index structure.
* tg/ce-namelen-field:
Strip namelen out of ce_flags into a ce_namelen field
Teach gitweb to pay attention to various forms of credits that are
similar to "Signed-off-by:" lines.
* nk/maint-gitweb-log-by-lines:
gitweb: Add support to Link: tag
gitweb: Handle other types of tag in git_print_log
gitweb: Cleanup git_print_log()
We do not document COMMIT_EDITMSG at all, but users may want
to know about it for two reasons:
1. They may want to tell their editor to configure itself
for formatting a commit message.
2. If a commit is aborted by an error, the user may want
to recover the commit message they typed.
Let's put a note in git-commit(1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we do not have to risk the list of tools going out of sync
between the implementation and the documentation.
In the same spirit as bf73fc2 (difftool: print list of valid tools
with '--tool-help', 2012-03-29), trim the list of merge backends in
the documentation. We do not want to have a complete list of valid
tools; we only want a list to help people guess what kind of things
the tools do to be specified there, and refer them to --tool-help
for a complete list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The identity of the committer will ultimately be pulled from
the ident code by commit_tree(). However, we make an attempt
to check the author and committer identity early, before the
user has done any manual work like inputting a commit
message. That lets us abort without them having to worry
about salvaging the work from .git/COMMIT_EDITMSG.
The early check for committer ident does not use the
IDENT_STRICT flag, meaning that it would not find an empty
name field. The motivation was presumably because we did not
want to be too restrictive, as later calls might be more lax
(for example, when we create the reflog entry, we do not
care too much about a real name). However, because
commit_tree will always get a strict identity to put in the
commit object itself, there is no point in being lax only to
die later (and in fact it is harmful, because the user will
have wasted time typing their commit message).
Incidentally, this bug was masked prior to 060d4bb, as the
initial loose call would taint the later strict call. So the
commit would succeed (albeit with a bogus committer line in
the commit object), and nobody noticed that our early check
did not match the later one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The advise() function takes a variable number of arguments
and converts them into a va_list object to pass to strbuf
for handling. However, we accidentally called strbuf_addf
(that takes a variable number of arguments) instead of
strbuf_vaddf (that takes a va_list).
This bug dates back to v1.7.8.1-1-g23cb5bf, but we never
noticed because none of the current callers passes a string
with a format specifier in it. And the compiler did not
notice because the format string is not available at
compile time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
block-sha1/ is fast on most known platforms. Clarify the Makefile to
be less misleading about that.
Early versions of block-sha1/ explicitly relied on fast htonl() and
fast 32-bit loads with arbitrary alignment. Now it uses those on some
arches but the default behavior is byte-at-a-time access for the sake
of arches like ARM, Alpha, and their kin and it is still pretty fast
on these arches (fast enough to supersede the mozilla SHA1
implementation and the hand-written ARM assembler implementation that
were bundled before).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When I invoke "make block-sha1/sha1.s", 'make' runs $(CC) -S without
specifying where it should put its output and the output ends up in
./sha1.s. Confusing.
Add an -o option to the .s rule to fix this. We were already doing
that for most compiler invocations but had forgotten it for the
assembler listings.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
't' is currently always a numeric constant, but it can't hurt to
prepare for the day that it becomes useful for a caller to pass in a
more complex expression.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With 660231aa (block-sha1: support for architectures with memory
alignment restrictions, 2009-08-12), blk_SHA1_Update was modified to
access 32-bit chunks of memory one byte at a time on arches that
prefer that:
#define get_be32(p) ( \
(*((unsigned char *)(p) + 0) << 24) | \
(*((unsigned char *)(p) + 1) << 16) | \
(*((unsigned char *)(p) + 2) << 8) | \
(*((unsigned char *)(p) + 3) << 0) )
The code previously accessed these values by just using htonl(*p).
Unfortunately, Michael noticed on an Alpha machine that git was using
plain 32-bit reads anyway. As soon as we convert a pointer to int *,
the compiler can assume that the object pointed to is correctly
aligned as an int (C99 section 6.3.2.3 "pointer conversions"
paragraph 7), and gcc takes full advantage by using a single 32-bit
load, resulting in a whole bunch of unaligned access traps.
So we need to obey the alignment constraints even when only dealing
with pointers instead of actual values. Do so by changing the type
of 'data' to void *. This patch renames 'data' to 'block' at the same
time to make sure all references are updated to reflect the new type.
Reported-tested-and-explained-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
