"git format-patch" learned to give 72-cols to diffstat, which is
consistent with other line length limits the subcommand uses for
its output meant for e-mails.
* nd/format-patch-stat-width:
format-patch: reduce patch diffstat width to 72
format-patch: keep cover-letter diffstat wrapped in 72 columns
Update the documentation for the 'submodule.recurse' config to identify
that the clone command does not respect it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of goto command in ref-filter for better readability.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make one function from 2 duplicate pieces and invoke it twice.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transport-helper protocol c-style quotes the value of
any options passed to the helper via the "option <key> <value>"
directive. However, remote-curl doesn't actually unquote the
push-option values, meaning that we will send the quoted
version to the other side (whereas git-over-ssh would send
the raw value).
The pack-protocol.txt documentation defines the push-options
as a series of VCHARs, which excludes most characters that
would need quoting. But:
1. You can still see the bug with a valid push-option that
starts with a double-quote (since that triggers
quoting).
2. We do currently handle any non-NUL characters correctly
in git-over-ssh. So even though the spec does not say
that we need to handle most quoted characters, it's
nice if our behavior is consistent between protocols.
There are two new tests: the "direct" one shows that this
already works in the non-http case, and the http one covers
this bugfix.
Reported-by: Jon Simons <jon@jonsimons.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We repeat many lines of setup code in the two http tests,
and further tests would need to repeat it again. Let's
factor this out into a function.
Incidentally, this also fixes an unlikely bug: if the httpd
root path contains a double-quote, our test_when_finished
would barf due to improper quoting (we escape the embedded
quotes, but not the $, meaning we expand the variable before
the eval).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for generating an rpm was dropped in ab214331cf ("Makefile: stop
pretending to support rpmbuild", 2016-04-04). We don't generate any
*.spec files so there is no need to clean them up.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 4e85333197 (worktree: make add <path> <branch> dwim, 2017-11-26)
added an example command in a literal code block, it neglected to
insert a mandatory "+" line before the block. This omission resulted
in both the literal code block and the (existing) paragraph following
the block to be outdented, even though they should be indented under
the 'add' sub-command along with the rest of the text pertaining to
that command. Furthermore, the mandatory "+" line separating the code
block from the following text got rendered as a leading character on
the line ("+ If <commit-ish>...") rather than being treated as a
formatting directive.
Fix these problems by adding the missing "+" line before the example
code block.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the closing ")" to a parenthetical phrase introduced by 4e85333197
(worktree: make add <path> <branch> dwim, 2017-11-26).
While at it, add a missing ":" at the end of the same sentence since
it precedes an example literal command block.
Reported-by: Mike Nordell <tamlin.thefirst@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git respects XDG_CACHE_HOME for the credential cache. So, we should
unset XDG_CACHE_HOME for the test environment, lest a user's custom one
cause failure in the test.
For example, t/t0301-credential-cache.sh expects a default directory
to be used if it hasn't explicitly set XDG_CACHE_HOME.
Signed-off-by: Genki Sky <sky@genki.is>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long time ago at fab47d05 ("merge: force edit and no-ff mode when
merging a tag object", 2011-11-07), "git merge" was made to always
create a merge commit when merging a tag, even when the side branch
being merged is a descendant of the current branch.
This default is good for merges made by upstream maintainers to
integrate work signed by downstream contributors, but will leave
pointless no-ff merges when downstream contributors pull a newer
release tag to make their long-running topic branches catch up with
the upstream. When there is no local work left on the topic, such a
merge should simply fast-forward to the commit pointed at by the
release tag.
Update the default (again) for "git merge" that merges a tag object
to (1) --no-ff (i.e. create a merge commit even when side branch
fast forwards) if the tag being merged is not at its expected place
in refs/tags/ hierarchy and (2) --ff (i.e. allow fast-forward update
when able) otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" was taught to ignore local changes to submodules as
they do not interfere with the partial addition of regular changes
anyway.
* nd/add-i-ignore-submodules:
add--interactive: ignore submodule changes except HEAD
"git stash -- <pathspec>" incorrectly blew away untracked files in
the directory that matched the pathspec, which has been corrected.
* tg/stash-with-pathspec-fix:
stash: don't delete untracked files that match pathspec
"git clone $there $here" is allowed even when here directory exists
as long as it is an empty directory, but the command incorrectly
removed it upon a failure of the operation.
* jk/abort-clone-with-existing-dest:
clone: do not clean up directories we didn't create
clone: factor out dir_exists() helper
t5600: modernize style
t5600: fix outdated comment about unborn HEAD
"git merge -Xours/-Xtheirs" learned to use our/their version when
resolving a conflicting updates to a symbolic link.
* jc/merge-symlink-ours-theirs:
merge: teach -Xours/-Xtheirs to symbolic link merge
API clean-up around revision traversal.
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
"git svn dcommit" did not take into account the fact that a
svn+ssh:// URL with a username@ (typically used for pushing) refers
to the same SVN repository without the username@ and failed when
svn.pushmergeinfo option is set.
* jm/svn-pushmergeinfo-fix:
git-svn: fix svn.pushmergeinfo handling of svn+ssh usernames.
An old regression in "git describe --all $annotated_tag^0" has been
fixed.
* dk/describe-all-output-fix:
describe: prepend "tags/" when describing tags with embedded name
More abstraction of hash function from the codepath.
* bc/hash-algo:
hash: update obsolete reference to SHA1_HEADER
bulk-checkin: abstract SHA-1 usage
csum-file: abstract uses of SHA-1
csum-file: rename sha1file to hashfile
read-cache: abstract away uses of SHA-1
pack-write: switch various SHA-1 values to abstract forms
pack-check: convert various uses of SHA-1 to abstract forms
fast-import: switch various uses of SHA-1 to the_hash_algo
sha1_file: switch uses of SHA-1 to the_hash_algo
builtin/unpack-objects: switch uses of SHA-1 to the_hash_algo
builtin/index-pack: improve hash function abstraction
hash: create union for hash context allocation
hash: move SHA-1 macros to hash.h
The way "git reset --hard" reports the commit the updated HEAD
points at is made consistent with the way how the commit title is
generated by the other parts of the system. This matters when the
title is spread across physically multiple lines.
* tg/reset-hard-show-head-with-pretty:
reset --hard: make use of the pretty machinery
More tests for wildmatch functions.
* ab/wildmatch-tests:
wildmatch test: mark test as EXPENSIVE_ON_WINDOWS
test-lib: add an EXPENSIVE_ON_WINDOWS prerequisite
wildmatch test: create & test files on disk in addition to in-memory
wildmatch test: perform all tests under all wildmatch() modes
wildmatch test: use test_must_fail, not ! for test-wildmatch
wildmatch test: remove dead fnmatch() test code
wildmatch test: use a paranoia pattern from nul_match()
wildmatch test: don't try to vertically align our output
wildmatch test: use more standard shell style
wildmatch test: indent with tabs, not spaces
"git pull --rebase" did not pass verbosity setting down when
recursing into a submodule.
* sb/pull-rebase-submodule:
builtin/pull: respect verbosity settings in submodules
Avoid mmapping small files while using packed refs (especially ones
with zero size, which would cause later munmap() to fail).
* kg/packed-ref-cache-fix:
packed_ref_cache: don't use mmap() for small files
load_contents(): don't try to mmap an empty file
packed_ref_iterator_begin(): make optimization more general
find_reference_location(): make function safe for empty snapshots
create_snapshot(): use `xmemdupz()` rather than a strbuf
struct snapshot: store `start` rather than `header_len`
* en/merge-recursive-fixes:
merge-recursive: add explanation for src_entry and dst_entry
merge-recursive: fix logic ordering issue
Tighten and correct a few testcases for merging and cherry-picking
Push the submodule version of collision-detecting SHA-1 hash
implementation a bit harder on builders.
* ab/sha1dc-build:
sha1dc_git.h: re-arrange an ifdef chain for a subsequent change
Makefile: under "make dist", include the sha1collisiondetection submodule
Makefile: don't error out under DC_SHA1_EXTERNAL if DC_SHA1_SUBMODULE=auto
Although "git worktree add" learned to run the 'post-checkout' hook in
ade546be47 (worktree: invoke post-checkout hook, 2017-12-07), it
neglected to change to the directory of the newly-created worktree
before running the hook. Instead, the hook runs within the directory
from which the "git worktree add" command itself was invoked, which
effectively neuters the hook since it knows nothing about the new
worktree directory.
Further, ade546be47 failed to sanitize the environment before running
the hook, which means that user-assigned values of GIT_DIR and
GIT_WORK_TREE could mislead the hook about the location of the new
worktree. In the case of "git worktree add" being run from a bare
repository, the GIT_DIR="." assigned by Git itself leaks into the hook's
environment and breaks Git commands; this is so even when the working
directory is correctly changed to the new worktree before the hook runs
since ".", relative to the new worktree directory, does not point at the
bare repository.
Fix these problems by (1) changing to the new worktree's directory
before running the hook, and (2) sanitizing the environment of GIT_DIR
and GIT_WORK_TREE so hooks can't be confused by misleading values.
Enhance the t2025 'post-checkout' tests to verify that the hook is
indeed run within the correct directory and that Git commands invoked by
the hook compute Git-dir and top-level worktree locations correctly.
While at it, also add two new tests: (1) verify that the hook is run
within the correct directory even when the new worktree is created from
a sibling worktree (as opposed to the main worktree); (2) verify that
the hook is provided with correct context when the new worktree is
created from a bare repository (test provided by Lars Schneider).
Implementation Notes:
Rather than sanitizing the environment of GIT_DIR and GIT_WORK_TREE, an
alternative would be to set them explicitly, as is already done for
other Git commands run internally by "git worktree add". This patch opts
instead to sanitize the environment in order to clearly document that
the worktree is fully functional by the time the hook is run, thus does
not require special environmental overrides.
The hook is run manually, rather than via run_hook_le(), since it needs
to change the working directory to that of the worktree, and
run_hook_le() does not provide such functionality. As this is a one-off
case, adding 'run_hook' overloads which allow the directory to be set
does not seem warranted at this time.
Reported-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subsequent patches will introduce file formats that make use of a fanout
array and a sorted table containing hashes, just like packfiles.
Refactor the hash search in packfile.c into its own function, so that
those patches can make use of it as well.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 628522ec14 ("sha1-lookup: more memory efficient search in
sorted list of SHA-1", 2008-04-09), a different algorithm for searching
a sorted list was introduced, together with a set of log statements
guarded by GIT_DEBUG_LOOKUP that are invoked both when using that
algorithm and when using the existing binary search. Those log
statements was meant for experiments and debugging, but with the removal
of the aforementioned different algorithm in commit f1068efefe
("sha1_file: drop experimental GIT_USE_LOOKUP search", 2017-08-09),
those log statements are probably no longer necessary.
Remove those statements.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subversion generates diffs that can contain lines like this one:
--- /dev/null (nonexistent)
Let's teach Git's apply machinery to handle such a line gracefully.
This fixes https://github.com/git-for-windows/git/isues/1489
Signed-off-by: Tatyana Krasnukha <tatyana@synopsys.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subversion generates diffs that contain funny ---/+++ lines containing
more than just the file names. Example:
--- a/trunk/README (revision 4711)
+++ /dev/null (nonexistent)
Let's add a test case demonstrating that apply cannot handle the
/dev/null line (although it can handle the trunk/README line just fine).
Reported in https://github.com/git-for-windows/git/issues/1489
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to have the output ' A' from 'git status --porcelain'
by adding a file using the '--intend-to-add' flag. Make this clear by
adding the pattern in the table of the documentation.
However the mode 'DM' (deleted in the index, modified in the working tree)
is not possible in the non-merge case in which the file only shows
as 'D ' (and adding it back to the worktree would show an additional line
of an '??' untracked file). It is also not possible in the merge case as
then the mode involves a 'U' on one side of the merge.
Remove that pattern.
Reported-by: Ross Light <light@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 20d2a30f8f (Makefile: replace perl/Makefile.PL with
simple make rules, 2017-12-10), the Git(3pm) man page is only
generated as an indirect dependency of the 'install-doc' and
'install-man' Makefile targets. Consequently, if someone runs 'make
man && sudo make install-man' (or their 'doc' counterparts), then
Git(3pm) will be generated as root, and the resulting root-owned files
and directories will in turn cause the next user-run 'make clean' to
fail. This was not an issue in the past, because Git(3pm) was
generated when 'make all' descended into 'perl/', which is usually not
run as root.
List Git(3pm) as a dependency of the 'doc' and 'man' Makefile targets,
too, so it gets generated by targets that are usually built as
ordinary users.
While at it, add 'install-man-perl' to the list of .PHONY targets.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
