The strftime() function has a non-standard "%s" extension, which prints
the number of seconds since the epoch. But the "struct tm" we get has
already been adjusted for a particular time zone; going back to an epoch
time requires knowing that zone offset. Since strftime() doesn't take
such an argument, round-tripping to a "struct tm" and back to the "%s"
format may produce the wrong value (off by tz_offset seconds).
Since we're already passing in the zone offset courtesy of c3fbf81a85
(strbuf: let strbuf_addftime handle %z and %Z itself, 2017-06-15), we
can use that same value to adjust our epoch seconds accordingly.
Note that the description above makes it sound like strftime()'s "%s" is
useless (and really, the issue is shared by mktime(), which is what
strftime() would use under the hood). But it gets the two cases for
which it's designed correct:
- the result of gmtime() will have a zero offset, so no adjustment is
necessary
- the result of localtime() will be offset by the local zone offset,
and mktime() and strftime() are defined to assume this offset when
converting back (there's actually some magic here; some
implementations record this in the "struct tm", but we can't
portably access or manipulate it. But they somehow "know" whether a
"struct tm" is from gmtime() or localtime()).
This latter point means that "format-local:%s" actually works correctly
already, because in that case we rely on the system routines due to
6eced3ec5e (date: use localtime() for "-local" time formats,
2017-06-15). Our problem comes when trying to show times in the author's
zone, as the system routines provide no mechanism for converting in
non-local zones. So in those cases we have a "struct tm" that came from
gmtime(), but has been manipulated according to our offset.
The tests cover the broken round-trip by formatting "%s" for a time in a
non-system timezone. We use the made-up "+1234" here, which has two
advantages. One, we know it won't ever be the real system zone (and so
we're actually testing a case that would break). And two, since it has a
minute component, we're testing the full decoding of the +HHMM zone into
a number of seconds. Likewise, we test the "-1234" variant to make sure
there aren't any sign mistakes.
There's one final test, which covers "format-local:%s". As noted, this
already passes, but it's important to check that we didn't regress this
case. In particular, the caller in show_date() is relying on localtime()
to have done the zone adjustment, independent of any tz_offset we
compute ourselves. These should match up, since our local_tzoffset() is
likewise built around localtime(). But it would be easy for a caller to
forget to pass in a correct tz_offset to strbuf_addftime(). Fortunately
show_date() does this correctly (it has to because of the existing
handling of %z), and the test continues to pass. So this one is just
future-proofing against a change in our assumptions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is wrong to read some settings directly from the config
subsystem, as things like feature.experimental can affect their
default values.
* gc/use-repo-settings:
gc: perform incremental repack when implictly enabled
fsck: verify multi-pack-index when implictly enabled
fsck: verify commit graph when implicitly enabled
Teach "git commit-graph" command not to allow using replace objects
at all, as we do not use the commit-graph at runtime when we see
object replacement.
* ab/ignore-replace-while-working-on-commit-graph:
commit-graph: don't consider "replace" objects with "verify"
commit-graph tests: fix another graph_git_two_modes() helper
commit-graph tests: fix error-hiding graph_git_two_modes() helper
"git log --grep=string --author=name" learns to highlight hits just
like "git grep string" does.
* hm/paint-hits-in-log-grep:
grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data
pretty: colorize pattern matches in commit messages
grep: refactor next_match() and match_one_pattern() for external use
"git branch -c/-m new old" was not described to copy config, which
has been corrected.
* jc/branch-copy-doc:
branch (doc): -m/-c copies config and reflog
Consistently use 'directory', not 'folder', to call the filesystem
entity that collects a group of files and, eh, directories.
* ma/doc-folder-to-directory:
gitweb.txt: change "folder" to "directory"
gitignore.txt: change "folder" to "directory"
git-multi-pack-index.txt: change "folder" to "directory"
Drop "git sparse-index" from the list of common commands.
* sg/sparse-index-not-that-common-a-command:
command-list.txt: remove 'sparse-index' from main help
Update "git archive" documentation and give explicit mention on the
compression level for both zip and tar.gz format.
* bs/archive-doc-compression-level:
archive: describe compression level option
Message regression fix.
* ks/submodule-add-message-fix:
submodule: drop unused sm_name parameter from append_fetch_remotes()
submodule--helper: fix incorrect newlines in an error message
Leakfix.
* ab/plug-random-leaks:
reflog: free() ref given to us by dwim_log()
submodule--helper: fix small memory leaks
clone: fix a memory leak of the "git_dir" variable
grep: fix a "path_list" memory leak
grep: use object_array_clear() in cmd_grep()
grep: prefer "struct grep_opt" over its "void *" equivalent
"git for-each-ref" family of commands were leaking the ref_sorting
instances that hold sorting keys specified by the user; this has
been corrected.
* ab/ref-filter-leakfix:
branch: use ref_sorting_release()
ref-filter API user: add and use a ref_sorting_release()
tag: use a "goto cleanup" pattern, leak less memory
"git push" client talking to an HTTP server did not diagnose the
lack of the final status report from the other side correctly,
which has been corrected.
* jk/http-push-status-fix:
transport-helper: recognize "expecting report" error from send-pack
send-pack: complain about "expecting report" with --helper-status
A new feature has been added to abort early in the test framework.
* ab/test-bail:
test-lib.sh: use "Bail out!" syntax on bad SANITIZE=leak use
test-lib.sh: de-duplicate error() teardown code
Remove the unused wrapper function.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already note that we may produce invalid output when we skip calling
iconv() altogether. But we may also do so if iconv() fails, and we have
no good alternative. Let's document this to avoid surprising users.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit fd680bc5 (logmsg_reencode(): warn when iconv()
fails, 2021-08-27). Throwing a warning for each and every commit
that gets reencoded, without allowing a way to squelch, would make
it unpleasant for folks who have to deal with an ancient part of the
history in an old project that used wrong encoding in the commits.
Commit ddfe900612 (test-lib-functions: move function to lib-bitmap.sh,
2021-02-09) meant to include lib-bitmap.sh in t5310, but also includes
lib-bundle.sh. Yet we don't use any of its functions, nor have anything
to do with bundles. This is probably just a typo/copy-paste error, as
lib-bundle.sh was added (correctly) to other scripts in the same series.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the basic `[`/`test` command, the string equality operator is a
single `=`. The `==` operator is only available in `[[`, which is a
bash-ism also supported by zsh.
This mix-up was causing the following completion error in zsh:
> __git_ls_files_helper:7: = not found
(That message refers to the extraneous symbol in `==` ← `=`).
This updates that comparison to use a single `=` inside the
basic `[ … ]` test conditional.
Although this fix is inconsistent with the other comparisons in this
file, which use `[[ … == … ]]`, and the two expressions are functionally
identical in this context, that approach was rejected due to a
preference for `[`.
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These three commands recently learned to avoid updating paths outside
the sparse checkout even if they are missing the SKIP_WORKTREE bit. This
is done using path_in_sparse_checkout(), which checks whether a given
path matches the current list of sparsity rules, similar to what
clear_ce_flags() does when we run "git sparse checkout init" or "git
sparse-checkout reapply". However, clear_ce_flags() uses a recursive
approach, applying the match results from parent directories on paths
that get the UNDECIDED result, whereas path_in_sparse_checkout() only
attempts to match the full path and immediately considers UNDECIDED as
NOT_MATCHED. This makes the function miss matches with leading
directories. For example, if the user has the sparsity patterns "!/a"
and "b/", add, rm, and mv will fail to update the path "a/b/c" and end
up displaying a warning about it being outside the sparse checkout even
though it isn't. This problem only occurs in full pattern mode as the
pattern matching functions never return UNDECIDED for cone mode.
To fix this, replicate the recursive behavior of clear_ce_flags() in
path_in_sparse_checkout(), falling back to the parent directory match
when a path gets the UNDECIDED result. (If this turns out to be too
expensive in some cases, we may want to later add some form of caching
to accelerate multiple queries within the same directory. This is not
implemented in this patch, though.) Also add two tests for each affected
command (add, rm, and mv) to check that they behave correctly with the
recursive pattern matching. The first test would previously fail without
this patch while the second already succeeded. It is added mostly to
make sure that we are not breaking the existing pattern matching for
directories that are really sparse, and also as a protection against any
future regressions.
Two other existing tests had to be changed as well: one test in t3602
checks that "git rm -r <dir>" won't remove sparse entries, but it didn't
allow the non-sparse entries inside <dir> to be removed. The other one,
in t7002, tested that "git mv" would correctly display a warning message
for sparse paths, but it accidentally expected the message to include
two non-sparse paths as well.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an "and" to separate the two halves of the first sentence of the
paragraph more. Add a comma to similarly separate the two halves of the
second sentence a bit better. Add a period at the end of the paragraph.
Further down in the file, add the missing "be" in "must be accompanied".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8650c6298c (doc lint: make "lint-docs" non-.PHONY, 2021-10-15), we
put the output for gitlink linter into .build/lint-docs/gitlink. There
are order-only dependencies to create the sequence of subdirs like:
.build/lint-docs: | .build
$(QUIET)mkdir $@
.build/lint-docs/gitlink: | .build/lint-docs
$(QUIET)mkdir $@
where each level has to depend on the prior one (since the parent
directory must exist for us to create something inside it). But the
"howto" and "config" subdirectories of gitlink have the wrong
dependency; they depend on "lint-docs", not "lint-docs/gitlink".
This usually works out, because the LINT_DOCS_GITLINK targets which
depend on "gitlink/howto" also depend on just "gitlink", so the
directory gets created anyway. But since we haven't given make an
explicit ordering, things can racily happen out of order.
If you stick a "sleep 1" in the rule to build "gitlink" like this:
## Lint: gitlink
.build/lint-docs/gitlink: | .build/lint-docs
- $(QUIET)mkdir $@
+ $(QUIET)sleep 1 && mkdir $@
then "make clean; make lint-docs" will fail reliably. Or you can see it
as-is just by building the directory in isolation:
$ make clean
[...]
$ make .build/lint-docs/gitlink/howto
GEN mergetools-list.made
GEN cmd-list.made
GEN doc.dep
SUBDIR ../
make[1]: 'GIT-VERSION-FILE' is up to date.
SUBDIR ../
make[1]: 'GIT-VERSION-FILE' is up to date.
mkdir: cannot create directory ‘.build/lint-docs/gitlink/howto’: No such file or directory
make: *** [Makefile:476: .build/lint-docs/gitlink/howto] Error 1
The fix is easy: we just need to depend on the correct parent directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c21fb4676f (submodule--helper: fix incorrect newlines in an error
message, 2021-10-23) accidentally added a new, unused parameter while
changing the name and signature of show_fetch_remotes() to
append_fetch_remotes(). We can drop this to keep things simpler (and
satisfy -Wunused-parameter).
The error is likely because c21fb4676f is fixing a problem from
8c8195e9c3 (submodule--helper: introduce add-clone subcommand,
2021-07-10). An earlier iteration of that second commit introduced the
same unused parameter (though it was dropped before it finally made it
to 'next'), and the fix on top accidentally carried forward the extra
parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up.
* ab/test-lib-diff-cleanup:
tests: stop using top-level "README" and "COPYING" files
"lib-diff" tests: make "README" and "COPYING" test data smaller
The codepath to write a new version of .midx multi-pack index files
has learned to release the mmaped memory holding the current
version of .midx before removing them from the disk, as some
platforms do not allow removal of a file that still has mapping.
* tb/fix-midx-rename-while-mapped:
midx.c: guard against commit_lock_file() failures
midx.c: lookup MIDX by object directory during repack
midx.c: lookup MIDX by object directory during expire
midx.c: extract MIDX lookup by object_dir
Improve test framework around unwritable directories.
* ab/test-cleanly-recreate-trash-directory:
test-lib.sh: try to re-chmod & retry on failed trash removal
Bunch of tests are marked as "passing leak check".
* ab/mark-leak-free-tests-more:
merge: add missing strbuf_release()
ls-files: add missing string_list_clear()
ls-files: fix a trivial dir_clear() leak
tests: fix test-oid-array leak, test in SANITIZE=leak
tests: fix a memory leak in test-oidtree.c
tests: fix a memory leak in test-parse-options.c
tests: fix a memory leak in test-prio-queue.c
Bunch of tests are marked as "passing leak check".
* ab/mark-leak-free-tests:
leak tests: mark some misc tests as passing with SANITIZE=leak
leak tests: mark various "generic" tests as passing with SANITIZE=leak
leak tests: mark some read-tree tests as passing with SANITIZE=leak
leak tests: mark some ls-files tests as passing with SANITIZE=leak
leak tests: mark all checkout-index tests as passing with SANITIZE=leak
leak tests: mark all trace2 tests as passing with SANITIZE=leak
leak tests: mark all ls-tree tests as passing with SANITIZE=leak
leak tests: run various "test-tool" tests in t00*.sh SANITIZE=leak
leak tests: run various built-in tests in t00*.sh SANITIZE=leak
Random changes to parse-options implementation.
* ab/parse-options-cleanup:
parse-options: change OPT_{SHORT,UNSET} to an enum
parse-options tests: test optname() output
parse-options.[ch]: make opt{bug,name}() "static"
commit-graph: stop using optname()
parse-options.c: move optname() earlier in the file
parse-options.h: make the "flags" in "struct option" an enum
parse-options.c: use exhaustive "case" arms for "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_flags"
parse-options.h: move PARSE_OPT_SHELL_EVAL between enums
Userdiff patterns for the C++ language has been updated.
* js/userdiff-cpp:
userdiff-cpp: back out the digit-separators in numbers
userdiff-cpp: learn the C++ spaceship operator
userdiff-cpp: permit the digit-separating single-quote in numbers
userdiff-cpp: prepare test cases with yet unsupported features
userdiff-cpp: tighten word regex
t4034: add tests showing problematic cpp tokenizations
t4034/cpp: actually test that operator tokens are not split
The xxdiff difftool backend can exit with status 128, which the
difftool-helper that launches the backend takes as a significant
failure, when it is not significant at all. Work it around.
* da/mergetools-special-case-xxdiff-exit-128:
mergetools/xxdiff: prevent segfaults from stopping difftool
