The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Credential helpers are asked in turn until one of them give
positive response, which is cumbersome to turn off when you need to
run Git in an automated setting. The credential helper interface
learned to allow a helper to say "stop, don't ask other helpers."
Also GIT_TERMINAL_PROMPT environment can be set to false to disable
our built-in prompt mechanism for passwords.
* jk/credential-quit:
prompt: respect GIT_TERMINAL_PROMPT to disable terminal prompts
credential: let helpers tell us to quit
When we are trying to fill a credential, we loop over the
set of defined credential-helpers, then fall back to running
askpass, and then finally prompt on the terminal. Helpers
which cannot find a credential are free to tell us nothing,
but they cannot currently ask us to stop prompting.
This patch lets them provide a "quit" attribute, which asks
us to stop the process entirely (avoiding running more
helpers, as well as the askpass/terminal prompt).
This has a few possible uses:
1. A helper which prompts the user itself (e.g., in a
dialog) can provide a "cancel" button to the user to
stop further prompts.
2. Some helpers may know that prompting cannot possibly
work. For example, if their role is to broker a ticket
from an external auth system and that auth system
cannot be contacted, there is no point in continuing
(we need a ticket to authenticate, and the user cannot
provide one by typing it in).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The skip_prefix() function returns a pointer to the content
past the prefix, or NULL if the prefix was not found. While
this is nice and simple, in practice it makes it hard to use
for two reasons:
1. When you want to conditionally skip or keep the string
as-is, you have to introduce a temporary variable.
For example:
tmp = skip_prefix(buf, "foo");
if (tmp)
buf = tmp;
2. It is verbose to check the outcome in a conditional, as
you need extra parentheses to silence compiler
warnings. For example:
if ((cp = skip_prefix(buf, "foo"))
/* do something with cp */
Both of these make it harder to use for long if-chains, and
we tend to use starts_with() instead. However, the first line
of "do something" is often to then skip forward in buf past
the prefix, either using a magic constant or with an extra
strlen(3) (which is generally computed at compile time, but
means we are repeating ourselves).
This patch refactors skip_prefix() to return a simple boolean,
and to provide the pointer value as an out-parameter. If the
prefix is not found, the out-parameter is untouched. This
lets you write:
if (skip_prefix(arg, "foo ", &arg))
do_foo(arg);
else if (skip_prefix(arg, "bar ", &arg))
do_bar(arg);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-credential command requires that you feed it a
broken-down credential, which means that the client needs to
parse a URL itself. Since we have our own URL-parsing
routines, we can easily allow the caller to just give us the
URL as-is, saving them some code.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of outputing only the username and password, print all the
attributes, even those that already appeared in the input.
This is closer to what the C API does, and allows one to take the exact
output of "git credential fill" as input to "git credential approve" or
"git credential reject".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use git_getpass to retrieve the username and password
from the terminal. However, git_getpass will not echo the
username as the user types. We can fix this by using the
more generic git_prompt, which underlies git_getpass but
lets us specify an "echo" option.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is currently in connect.c, but really has nothing to
do with the git protocol itself. Let's make a new source
file all about prompting the user, which will make it
cleaner to refactor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a URL into a credential struct, we carefully
record each part of the URL, including the path on the
remote host, and use the result as part of the credential
context.
This had two practical implications:
1. Credential helpers which store a credential for later
access are likely to use the "path" portion as part of
the storage key. That means that a request to
https://example.com/foo.git
would not use the same credential that was stored in an
earlier request for:
https://example.com/bar.git
2. The prompt shown to the user includes all relevant
context, including the path.
In most cases, however, users will have a single password
per host. The behavior in (1) will be inconvenient, and the
prompt in (2) will be overly long.
This patch introduces a config option to toggle the
relevance of http paths. When turned on, we use the path as
before. When turned off, we drop the path component from the
context: helpers don't see it, and it does not appear in the
prompt.
This is nothing you couldn't do with a clever credential
helper at the start of your stack, like:
[credential "http://"]
helper = "!f() { grep -v ^path= ; }; f"
helper = your_real_helper
But doing this:
[credential]
useHttpPath = false
is way easier and more readable. Furthermore, since most
users will want the "off" behavior, that is the new default.
Users who want it "on" can set the variable (either for all
credentials, or just for a subset using
credential.*.useHttpPath).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Credential helpers can help users avoid having to type their
username and password over and over. However, some users may
not want a helper for their password, or they may be running
a helper which caches for a short time. In this case, it is
convenient to provide the non-secret username portion of
their credential via config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality for credential storage helpers is already
there; we just need to give the users a way to turn it on.
This patch provides a "credential.helper" configuration
variable which allows the user to provide one or more helper
strings.
Rather than simply matching credential.helper, we will also
compare URLs in subsection headings to the current context.
This means you can apply configuration to a subset of
credentials. For example:
[credential "https://example.com"]
helper = foo
would match a request for "https://example.com/foo.git", but
not one for "https://kernel.org/foo.git".
This is overkill for the "helper" variable, since users are
unlikely to want different helpers for different sites (and
since helpers run arbitrary code, they could do the matching
themselves anyway).
However, future patches will add new config variables where
this extra feature will be more useful.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the components of a credential struct can be found in
a URL. For example, the URL:
http://foo:bar@example.com/repo.git
contains:
protocol=http
host=example.com
path=repo.git
username=foo
password=bar
We want to be able to turn URLs into broken-down credential
structs so that we know two things:
1. Which parts of the username/password we still need
2. What the context of the request is (for prompting or
as a key for storing credentials).
This code is based on http_auth_init in http.c, but needed a
few modifications in order to get all of the components that
the credential object is interested in.
Once the http code is switched over to the credential API,
then http_auth_init can just go away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few places in git that need to get a username
and password credential from the user; the most notable one
is HTTP authentication for smart-http pushing.
Right now the only choices for providing credentials are to
put them plaintext into your ~/.netrc, or to have git prompt
you (either on the terminal or via an askpass program). The
former is not very secure, and the latter is not very
convenient.
Unfortunately, there is no "always best" solution for
password management. The details will depend on the tradeoff
you want between security and convenience, as well as how
git can integrate with other security systems (e.g., many
operating systems provide a keychain or password wallet for
single sign-on).
This patch provides an abstract notion of credentials as a
data item, and provides three basic operations:
- fill (i.e., acquire from external storage or from the
user)
- approve (mark a credential as "working" for further
storage)
- reject (mark a credential as "not working", so it can
be removed from storage)
These operations can be backed by external helper processes
that interact with system- or user-specific secure storage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
