We will need to pass down the `struct index_state` to
`mark_fsmonitor_valid()` for an upcoming bug fix, and this here function
calls that there function, so we need to extend the signature of
`fill_stat_cache_info()` first.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout --no-overlay" can be used to trigger a new mode of
checking out paths out of the tree-ish, that allows paths that
match the pathspec that are in the current index and working tree
and are not in the tree-ish.
* tg/checkout-no-overlay:
revert "checkout: introduce checkout.overlayMode config"
checkout: introduce checkout.overlayMode config
checkout: introduce --{,no-}overlay option
checkout: factor out mark_cache_entry_for_checkout function
checkout: clarify comment
read-cache: add invalidate parameter to remove_marked_cache_entries
entry: support CE_WT_REMOVE flag in checkout_entry
entry: factor out unlink_entry function
move worktree tests to t24*
"git checkout [<tree-ish>] path..." learned to report the number of
paths that have been checked out of the index or the tree-ish,
which gives it the same degree of noisy-ness as the case in which
the command checks out a branch.
* nd/checkout-noisy:
t0027: squelch checkout path run outside test_expect_* block
checkout: print something when checking out paths
'checkout_entry()' currently only supports creating new entries in the
working tree, but not deleting them. Add the ability to remove
entries at the same time if the entry is marked with the CE_WT_REMOVE
flag.
Currently this doesn't have any effect, as the CE_WT_REMOVE flag is
only used in unpack-tree, however we will make use of this in a
subsequent step in the series.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the 'unlink_entry()' function from unpack-trees.c to
entry.c. It will be used in other places as well in subsequent
steps.
As it's no longer a static function, also move the documentation to
the header file to make it more discoverable.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently added check for case smashing filesystems did not
correctly utilize the cached stat information, leading to false
breakage detected by our test suite, which has been corrected.
* nd/clone-case-smashing-warning:
clone: fix colliding file detection on APFS
Commit b878579ae7 (clone: report duplicate entries on case-insensitive
filesystems - 2018-08-17) adds a warning to user when cloning a repo
with case-sensitive file names on a case-insensitive file system. The
"find duplicate file" check was doing by comparing inode number (and
only fall back to fspathcmp() when inode is known to be unreliable
because fspathcmp() can't cover all case folding cases).
The inode check is very simple, and wrong. It compares between a
32-bit number (sd_ino) and potentially a 64-bit number (st_ino). When
an inode is larger than 2^32 (which seems to be the case for APFS), it
will be truncated and stored in sd_ino, but comparing with itself will
fail.
As a result, instead of showing a pair of files that have the same
name, we show just one file (marked before the beginning of the
loop). We fail to find the original one.
The fix could be just a simple type cast (*)
dup->ce_stat_data.sd_ino == (unsigned int)st->st_ino
but this is no longer a reliable test, there are 4G possible inodes
that can match sd_ino because we only match the lower 32 bits instead
of full 64 bits.
There are two options to go. Either we ignore inode and go with
fspathcmp() on Apple platform. This means we can't do accurate inode
check on HFS anymore, or even on APFS when inode numbers are still
below 2^32.
Or we just to to reduce the odds of matching a wrong file by checking
more attributes, counting mostly on st_size because st_xtime is likely
the same. This patch goes with this direction, hoping that false
positive chances are too small to be seen in practice.
While at there, enable the test on Cygwin (verified working by Ramsay
Jones)
(*) this is also already done inside match_stat_data()
Reported-by: Carlo Arenas <carenas@gmail.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the problems with "git checkout" is that it does so many
different things and could confuse people specially when we fail to
handle ambiguation correctly.
One way to help with that is tell the user what sort of operation is
actually carried out. When switching branches, we always print
something unless --quiet, either
- "HEAD is now at ..."
- "Reset branch ..."
- "Already on ..."
- "Switched to and reset ..."
- "Switched to a new branch ..."
- "Switched to branch ..."
Checking out paths however is silent. Print something so that if we
got the user intention wrong, they won't waste too much time to find
that out. For the remaining cases of checkout we now print either
- "Checked out ... paths out of the index"
- "Checked out ... paths out of <abbrev hash>"
Since the purpose of printing this is to help disambiguate. Only do it
when "--" is missing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git clone" against a project that contain two files with
pathnames that differ only in cases on a case insensitive
filesystem would result in one of the files lost because the
underlying filesystem is incapable of holding both at the same
time. An attempt is made to detect such a case and warn.
* nd/clone-case-smashing-warning:
clone: report duplicate entries on case-insensitive filesystems
Paths that only differ in case work fine in a case-sensitive
filesystems, but if those repos are cloned in a case-insensitive one,
you'll get problems. The first thing to notice is "git status" will
never be clean with no indication what exactly is "dirty".
This patch helps the situation a bit by pointing out the problem at
clone time. Even though this patch talks about case sensitivity, the
patch makes no assumption about folding rules by the filesystem. It
simply observes that if an entry has been already checked out at clone
time when we're about to write a new path, some folding rules are
behind this.
In the case that we can't rely on filesystem (via inode number) to do
this check, fall back to fspathcmp() which is not perfect but should
not give false positives.
This patch is tested with vim-colorschemes and Sublime-Gitignore
repositories on a JFS partition with case insensitive support on
Linux.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout-index.c needs update because if checkout->istate is NULL,
ie_match_stat() will crash. Previously this is ie_match_stat(&the_index, ..)
so it will not crash, but it is not technically correct either.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the convert API take an index_state instead of assuming the_index
in convert.c. All external call sites are converted blindly to keep
the patch simple and retain current behavior. Individual call sites
may receive further updates to use the right index instead of
the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert convert.c to struct object_id. Add a use of the_hash_algo to
replace hard-coded constants and change a strbuf_add to a strbuf_addstr
to avoid another hard-coded constant.
Note that a strict conversion using the hexsz constant would cause
problems in the future if the internal and user-visible hash algorithms
differed, as anticipated by the hash function transition plan.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
Bugfixes to an already graduated series.
* ls/filter-process-delayed:
write_entry: untangle symlink and regular-file cases
write_entry: avoid reading blobs in CE_RETRY case
write_entry: fix leak when retrying delayed filter
entry.c: check if file exists after checkout
entry.c: update cache entry only for existing files
The write_entry() function switches on the mode of the entry
we're going to write out. The cases for S_IFLNK and S_IFREG
are lumped together. In earlier versions of the code, this
made some sense. They have a shared preamble (which reads
the blob content), a short type-specific body, and a shared
conclusion (which writes out the file contents; always for
S_IFREG and only sometimes for S_IFLNK).
But over time this has grown to make less sense. The preamble
now has conditional bits for each type, and the S_IFREG body
has grown a lot more complicated. It's hard to follow the
logic of which code is running for which mode.
Let's give each mode its own case arm. We will still share
the conclusion code, which means we now jump to it with a
goto. Ideally we'd pull that shared code into its own
function, but it touches so much internal state in the
write_entry() function that the end result is actually
harder to follow than the goto.
While we're here, we'll touch up a few bits of whitespace to
make the beginning and endings of the cases easier to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When retrying a delayed filter-process request, we don't
need to send the blob to the filter a second time. However,
we read it unconditionally into a buffer, only to later
throw away that buffer. We can make this more efficient by
skipping the read in the first place when it isn't
necessary.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When write_entry() retries a delayed filter request, we
don't need to send the blob content to the filter again, and
set the pointer to NULL. But doing so means we leak the
contents we read earlier from read_blob_entry(). Let's make
sure to free it before dropping the pointer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are checking out a file and somebody else racily deletes our file,
then we would write garbage to the cache entry. Fix that by checking
the result of the lstat() call on that file. Print an error to the user
if the file does not exist.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2841e8f ("convert: add "status=delayed" to filter process protocol",
2017-06-30) we taught the filter process protocol to delay responses.
That means an external filter might answer in the first write_entry()
call on a file that requires filtering "I got your request, but I
can't answer right now. Ask again later!". As Git got no answer, we do
not write anything to the filesystem. Consequently, the lstat() call in
the finish block of the function writes garbage to the cache entry.
The garbage is eventually overwritten when the filter answers with
the final file content in a subsequent write_entry() call.
Fix the brief time window of garbage in the cache entry by adding a
special finish block that does nothing for delayed responses. The cache
entry is written properly in a subsequent write_entry() call where
the filter responds with the final file content.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index is read from disk, the fsmonitor index extension is used
to flag the last known potentially dirty index entries. The registered
core.fsmonitor command is called with the time the index was last
updated and returns the list of files changed since that time. This list
is used to flag any additional dirty cache entries and untracked cache
directories.
We can then use this valid state to speed up preload_index(),
ie_match_stat(), and refresh_cache_ent() as they do not need to lstat()
files to detect potential changes for those entries marked
CE_FSMONITOR_VALID.
In addition, if the untracked cache is turned on valid_cached_dir() can
skip checking directories for new or changed files as fsmonitor will
invalidate the cache only for those directories that have been
identified as having potential changes.
To keep the CE_FSMONITOR_VALID state accurate during git operations;
when git updates a cache entry to match the current state on disk,
it will now set the CE_FSMONITOR_VALID bit.
Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit
is cleared and the corresponding untracked cache directory is marked
invalid.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
The prior commit converted many sites to check the return
value of write_in_full() for negativity, rather than a
mismatch with the input length. This patch covers similar
cases, but where the return value is stored in an
intermediate variable. These should get the same treatment,
but they need to be reviewed more carefully since it would
be a bug if the return value is stored in an unsigned type
(which indeed, it is in one of the cases).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath to call external process filter for smudge/clean
operation learned to show the progress meter.
* ls/convert-filter-progress:
convert: display progress for filtered objects that have been delayed
In 2841e8f ("convert: add "status=delayed" to filter process protocol",
2017-06-30) we taught the filter process protocol to delayed responses.
These responses are processed after the "Checking out files" phase.
If the processing takes noticeable time, then the user might think Git
is stuck.
Display the progress of the delayed responses to let the user know that
Git is still processing objects. This works very well for objects that
can be filtered quickly. If filtering of an individual object takes
noticeable time, then the user might still think that Git is stuck.
However, in that case the user would at least know what Git is doing.
It would be technical more correct to display "Checking out files whose
content filtering has been delayed". For brevity we only print
"Filtering content".
The finish_delayed_checkout() call was moved below the stop_progress()
call in unpack-trees.c to ensure that the "Checking out files" progress
is properly stopped before the "Filtering content" progress starts in
finish_delayed_checkout().
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Suggested-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some `clean` / `smudge` filters may require a significant amount of
time to process a single blob (e.g. the Git LFS smudge filter might
perform network requests). During this process the Git checkout
operation is blocked and Git needs to wait until the filter is done to
continue with the checkout.
Teach the filter process protocol, introduced in edcc8581 ("convert: add
filter.<driver>.process option", 2016-10-16), to accept the status
"delayed" as response to a filter request. Upon this response Git
continues with the checkout operation. After the checkout operation Git
calls "finish_delayed_checkout" which queries the filter for remaining
blobs. If the filter is still working on the completion, then the filter
is expected to block. If the filter has completed all remaining blobs
then an empty response is expected.
Git has a multiple code paths that checkout a blob. Support delayed
checkouts only in `clone` (in unpack-trees.c) and `checkout` operations
for now. The optimization is most effective in these code paths as all
files of the tree are processed.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case of a non-forced worktree update, the submodule movement is tested
in a dry run first, such that it doesn't matter if the actual update is
done via the force flag. However for correctness, we want to give the
flag as specified by the user. All callers have been inspected and updated
if needed.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is introduced with a new revision
we need to create the submodule in the worktree as well.
As 'submodule_move_head' handles edge cases, all we have
to do is call it from within the function that creates
new files in the working tree for workingtree operations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since all of its callers have been updated, modify stream_blob_to_fd to
take a struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We frequently allocate strings as xmalloc(len + 1), where
the extra 1 is for the NUL terminator. This can be done more
simply with xmallocz, which also checks for integer
overflow.
There's no case where switching xmalloc(n+1) to xmallocz(n)
is wrong; the result is the same length, and malloc made no
guarantees about what was in the buffer anyway. But in some
cases, we can stop manually placing NUL at the end of the
allocated buffer. But that's only safe if it's clear that
the contents will always fill the buffer.
In each case where this patch does so, I manually examined
the control flow, and I tried to err on the side of caution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This particular conversion is non-obvious, because nobody
has passed our function the length of the destination
buffer. However, the interface to checkout_entry specifies
that the buffer must be at least TEMPORARY_FILENAME_LENGTH
bytes long, so we can check that (meaning the existing code
was not buggy, but merely worrisome to somebody reading it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The large part of this patch just follows CE_ENTRY_CHANGED
marks. replace_index_entry() is updated to update
split_index->base->cache[] as well so base->cache[] does not reference
to a freed entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other fill_stat_cache_info() is on new entries, which should set
CE_ENTRY_ADDED in cache_changed, so we're safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/remove-subtree-long-pathname-fix:
entry.c: fix possible buffer overflow in remove_subtree()
checkout_entry(): use the strbuf throughout the function
remove_subtree() manipulated path in a fixed-size buffer even though
the length of the input, let alone the length of entries within the
directory, were not known in advance. Change the function to take a
strbuf argument and use that object as its scratch space.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to break out the "buf" and "len" members into
separate temporary variables. Rename path_buf to path and use
path.buf and path.len directly. This makes it easier to reason about
the data flow in the function.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The said function has this signature:
extern int checkout_entry(struct cache_entry *ce,
const struct checkout *state,
char *topath);
At first glance, it might appear that the caller of checkout_entry()
can specify to which path the contents are written out by the last
parameter, and it is tempting to add "const" in front of its type.
In reality, however, topath[] is to point at a buffer to store the
temporary path generated by the callchain originating from this
function, and the temporary path is always short, much shorter than
the buffer prepared by its only caller in builtin/checkout-index.c.
Document the code a bit to clarify so that future callers know how
to use the function better.
Noticed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old code does not do boundary check so any paths longer than
PATH_MAX can cause buffer overflow. Replace it with strbuf to handle
paths of arbitrary length.
The OS may reject if the path is too long though. But in that case we
report the cause (e.g. name too long) and usually move on to checking
out the next entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are only four (with some generous rounding) instances in the
current source code where we speak of "subproject" instead of
"submodule". They are as follows:
* one error message in git-apply and two in entry.c
* the patch format for submodule changes
The latter was introduced in 0478675 (Expose subprojects as special
files to "git diff" machinery, 2007-04-15), apparently before the
terminology was settled. We can of course not change the patch
format.
Let's at least change the error messages to consistently call them
"submodule".
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the streaming interface and other codepaths more carefully
examine for corrupt objects.
* jk/check-corrupt-objects-carefully:
clone: leave repo in place after checkout errors
clone: run check_everything_connected
clone: die on errors from unpack_trees
add tests for cloning corrupted repositories
streaming_write_entry: propagate streaming errors
add test for streaming corrupt blobs
avoid infinite loop in read_istream_loose
read_istream_filtered: propagate read error from upstream
check_sha1_signature: check return value from read_istream
stream_blob_to_fd: detect errors reading from stream
Codepath to stream blob object contents directly from the object
store to filesystem did not use the correct path to find conversion
filters when writing to temporary files.
* jk/checkout-attribute-lookup:
t2003: work around path mangling issue on Windows
entry: fix filter lookup
t2003: modernize style
When we are streaming an index blob to disk, we store the
error from stream_blob_to_fd in the "result" variable, and
then immediately overwrite that with the return value of
"close". That means we catch errors on close (e.g., problems
committing the file to disk), but miss anything which
happened before then.
We can fix this by using bitwise-OR to accumulate errors in
our result variable.
While we're here, we can also simplify the error handling
with an early return, which makes it easier to see under
which circumstances we need to clean up.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking up the stream filter, write_entry() should be passing the
path of the file in the repository, not the path to which the content is
going to be written. This allows the file to be correctly looked up
against the .gitattributes files in the working tree.
This change makes the streaming case match the non-streaming case which
passes ce->name to convert_to_working_tree later in the same function.
The two tests added here test the different paths through write_entry
since the CRLF filter is a streaming filter but the user-defined smudge
filter is not streamed.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
